diff options
Diffstat (limited to 'include/drm/drm_crtc.h')
| -rw-r--r-- | include/drm/drm_crtc.h | 1141 |
1 files changed, 1141 insertions, 0 deletions
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h new file mode 100644 index 000000000..92e7fc7f0 --- /dev/null +++ b/include/drm/drm_crtc.h @@ -0,0 +1,1141 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007-2008 Dave Airlie + * Copyright © 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#ifndef __DRM_CRTC_H__ +#define __DRM_CRTC_H__ + +#include <linux/i2c.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/fb.h> +#include <linux/hdmi.h> +#include <linux/media-bus-format.h> +#include <uapi/drm/drm_mode.h> +#include <uapi/drm/drm_fourcc.h> +#include <drm/drm_modeset_lock.h> +#include <drm/drm_rect.h> +#include <drm/drm_mode_object.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_modes.h> +#include <drm/drm_connector.h> +#include <drm/drm_property.h> +#include <drm/drm_bridge.h> +#include <drm/drm_edid.h> +#include <drm/drm_plane.h> +#include <drm/drm_blend.h> +#include <drm/drm_color_mgmt.h> +#include <drm/drm_debugfs_crc.h> +#include <drm/drm_mode_config.h> + +struct drm_device; +struct drm_mode_set; +struct drm_file; +struct drm_clip_rect; +struct drm_printer; +struct device_node; +struct dma_fence; +struct edid; + +static inline int64_t U642I64(uint64_t val) +{ + return (int64_t)*((int64_t *)&val); +} +static inline uint64_t I642U64(int64_t val) +{ + return (uint64_t)*((uint64_t *)&val); +} + +struct drm_crtc; +struct drm_pending_vblank_event; +struct drm_plane; +struct drm_bridge; +struct drm_atomic_state; + +struct drm_crtc_helper_funcs; +struct drm_plane_helper_funcs; + +/** + * struct drm_crtc_state - mutable CRTC state + * + * Note that the distinction between @enable and @active is rather subtile: + * Flipping @active while @enable is set without changing anything else may + * never return in a failure from the &drm_mode_config_funcs.atomic_check + * callback. Userspace assumes that a DPMS On will always succeed. In other + * words: @enable controls resource assignment, @active controls the actual + * hardware state. + * + * The three booleans active_changed, connectors_changed and mode_changed are + * intended to indicate whether a full modeset is needed, rather than strictly + * describing what has changed in a commit. See also: + * drm_atomic_crtc_needs_modeset() + * + * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or + * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control + * state like @plane_mask so drivers not converted over to atomic helpers should + * not rely on these being accurate! + */ +struct drm_crtc_state { + /** @crtc: backpointer to the CRTC */ + struct drm_crtc *crtc; + + /** + * @enable: Whether the CRTC should be enabled, gates all other state. + * This controls reservations of shared resources. Actual hardware state + * is controlled by @active. + */ + bool enable; + + /** + * @active: Whether the CRTC is actively displaying (used for DPMS). + * Implies that @enable is set. The driver must not release any shared + * resources if @active is set to false but @enable still true, because + * userspace expects that a DPMS ON always succeeds. + * + * Hence drivers must not consult @active in their various + * &drm_mode_config_funcs.atomic_check callback to reject an atomic + * commit. They can consult it to aid in the computation of derived + * hardware state, since even in the DPMS OFF state the display hardware + * should be as much powered down as when the CRTC is completely + * disabled through setting @enable to false. + */ + bool active; + + /** + * @planes_changed: Planes on this crtc are updated. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. + */ + bool planes_changed : 1; + + /** + * @mode_changed: @mode or @enable has been changed. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + * + * Drivers are supposed to set this for any CRTC state changes that + * require a full modeset. They can also reset it to false if e.g. a + * @mode change can be done without a full modeset by only changing + * scaler settings. + */ + bool mode_changed : 1; + + /** + * @active_changed: @active has been toggled. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + */ + bool active_changed : 1; + + /** + * @connectors_changed: Connectors to this crtc have been updated, + * either in their state or routing. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + * + * Drivers are supposed to set this as-needed from their own atomic + * check code, e.g. from &drm_encoder_helper_funcs.atomic_check + */ + bool connectors_changed : 1; + /** + * @zpos_changed: zpos values of planes on this crtc have been updated. + * Used by the atomic helpers and drivers to steer the atomic commit + * control flow. + */ + bool zpos_changed : 1; + /** + * @color_mgmt_changed: Color management properties have changed + * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and + * drivers to steer the atomic commit control flow. + */ + bool color_mgmt_changed : 1; + + /** + * @no_vblank: + * + * Reflects the ability of a CRTC to send VBLANK events. This state + * usually depends on the pipeline configuration, and the main usuage + * is CRTCs feeding a writeback connector operating in oneshot mode. + * In this case the VBLANK event is only generated when a job is queued + * to the writeback connector, and we want the core to fake VBLANK + * events when this part of the pipeline hasn't changed but others had + * or when the CRTC and connectors are being disabled. + * + * __drm_atomic_helper_crtc_duplicate_state() will not reset the value + * from the current state, the CRTC driver is then responsible for + * updating this field when needed. + * + * Note that the combination of &drm_crtc_state.event == NULL and + * &drm_crtc_state.no_blank == true is valid and usually used when the + * writeback connector attached to the CRTC has a new job queued. In + * this case the driver will send the VBLANK event on its own when the + * writeback job is complete. + */ + bool no_vblank : 1; + + /** + * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to + * this CRTC. + */ + u32 plane_mask; + + /** + * @connector_mask: Bitmask of drm_connector_mask(connector) of + * connectors attached to this CRTC. + */ + u32 connector_mask; + + /** + * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders + * attached to this CRTC. + */ + u32 encoder_mask; + + /** + * @adjusted_mode: + * + * Internal display timings which can be used by the driver to handle + * differences between the mode requested by userspace in @mode and what + * is actually programmed into the hardware. + * + * For drivers using &drm_bridge, this stores hardware display timings + * used between the CRTC and the first bridge. For other drivers, the + * meaning of the adjusted_mode field is purely driver implementation + * defined information, and will usually be used to store the hardware + * display timings used between the CRTC and encoder blocks. + */ + struct drm_display_mode adjusted_mode; + + /** + * @mode: + * + * Display timings requested by userspace. The driver should try to + * match the refresh rate as close as possible (but note that it's + * undefined what exactly is close enough, e.g. some of the HDMI modes + * only differ in less than 1% of the refresh rate). The active width + * and height as observed by userspace for positioning planes must match + * exactly. + * + * For external connectors where the sink isn't fixed (like with a + * built-in panel), this mode here should match the physical mode on the + * wire to the last details (i.e. including sync polarities and + * everything). + */ + struct drm_display_mode mode; + + /** + * @mode_blob: &drm_property_blob for @mode, for exposing the mode to + * atomic userspace. + */ + struct drm_property_blob *mode_blob; + + /** + * @degamma_lut: + * + * Lookup table for converting framebuffer pixel data before apply the + * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The + * blob (if not NULL) is an array of &struct drm_color_lut. + */ + struct drm_property_blob *degamma_lut; + + /** + * @ctm: + * + * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The + * blob (if not NULL) is a &struct drm_color_ctm. + */ + struct drm_property_blob *ctm; + + /** + * @gamma_lut: + * + * Lookup table for converting pixel data after the color conversion + * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not + * NULL) is an array of &struct drm_color_lut. + */ + struct drm_property_blob *gamma_lut; + + /** + * @target_vblank: + * + * Target vertical blank period when a page flip + * should take effect. + */ + u32 target_vblank; + + /** + * @pageflip_flags: + * + * DRM_MODE_PAGE_FLIP_* flags, as passed to the page flip ioctl. + * Zero in any other case. + */ + u32 pageflip_flags; + + /** + * @event: + * + * Optional pointer to a DRM event to signal upon completion of the + * state update. The driver must send out the event when the atomic + * commit operation completes. There are two cases: + * + * - The event is for a CRTC which is being disabled through this + * atomic commit. In that case the event can be send out any time + * after the hardware has stopped scanning out the current + * framebuffers. It should contain the timestamp and counter for the + * last vblank before the display pipeline was shut off. The simplest + * way to achieve that is calling drm_crtc_send_vblank_event() + * somewhen after drm_crtc_vblank_off() has been called. + * + * - For a CRTC which is enabled at the end of the commit (even when it + * undergoes an full modeset) the vblank timestamp and counter must + * be for the vblank right before the first frame that scans out the + * new set of buffers. Again the event can only be sent out after the + * hardware has stopped scanning out the old buffers. + * + * - Events for disabled CRTCs are not allowed, and drivers can ignore + * that case. + * + * This can be handled by the drm_crtc_send_vblank_event() function, + * which the driver should call on the provided event upon completion of + * the atomic commit. Note that if the driver supports vblank signalling + * and timestamping the vblank counters and timestamps must agree with + * the ones returned from page flip events. With the current vblank + * helper infrastructure this can be achieved by holding a vblank + * reference while the page flip is pending, acquired through + * drm_crtc_vblank_get() and released with drm_crtc_vblank_put(). + * Drivers are free to implement their own vblank counter and timestamp + * tracking though, e.g. if they have accurate timestamp registers in + * hardware. + * + * For hardware which supports some means to synchronize vblank + * interrupt delivery with committing display state there's also + * drm_crtc_arm_vblank_event(). See the documentation of that function + * for a detailed discussion of the constraints it needs to be used + * safely. + * + * If the device can't notify of flip completion in a race-free way + * at all, then the event should be armed just after the page flip is + * committed. In the worst case the driver will send the event to + * userspace one frame too late. This doesn't allow for a real atomic + * update, but it should avoid tearing. + */ + struct drm_pending_vblank_event *event; + + /** + * @commit: + * + * This tracks how the commit for this update proceeds through the + * various phases. This is never cleared, except when we destroy the + * state, so that subsequent commits can synchronize with previous ones. + */ + struct drm_crtc_commit *commit; + + /** @state: backpointer to global drm_atomic_state */ + struct drm_atomic_state *state; +}; + +/** + * struct drm_crtc_funcs - control CRTCs for a given device + * + * The drm_crtc_funcs structure is the central CRTC management structure + * in the DRM. Each CRTC controls one or more connectors (note that the name + * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. + * connectors, not just CRTs). + * + * Each driver is responsible for filling out this structure at startup time, + * in addition to providing other modesetting features, like i2c and DDC + * bus accessors. + */ +struct drm_crtc_funcs { + /** + * @reset: + * + * Reset CRTC hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + * + * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset + * atomic state using this hook. + */ + void (*reset)(struct drm_crtc *crtc); + + /** + * @cursor_set: + * + * Update the cursor image. The cursor position is relative to the CRTC + * and can be partially or fully outside of the visible area. + * + * Note that contrary to all other KMS functions the legacy cursor entry + * points don't take a framebuffer object, but instead take directly a + * raw buffer object id from the driver's buffer manager (which is + * either GEM or TTM for current drivers). + * + * This entry point is deprecated, drivers should instead implement + * universal plane support and register a proper cursor plane using + * drm_crtc_init_with_planes(). + * + * This callback is optional + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, + uint32_t handle, uint32_t width, uint32_t height); + + /** + * @cursor_set2: + * + * Update the cursor image, including hotspot information. The hotspot + * must not affect the cursor position in CRTC coordinates, but is only + * meant as a hint for virtualized display hardware to coordinate the + * guests and hosts cursor position. The cursor hotspot is relative to + * the cursor image. Otherwise this works exactly like @cursor_set. + * + * This entry point is deprecated, drivers should instead implement + * universal plane support and register a proper cursor plane using + * drm_crtc_init_with_planes(). + * + * This callback is optional. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv, + uint32_t handle, uint32_t width, uint32_t height, + int32_t hot_x, int32_t hot_y); + + /** + * @cursor_move: + * + * Update the cursor position. The cursor does not need to be visible + * when this hook is called. + * + * This entry point is deprecated, drivers should instead implement + * universal plane support and register a proper cursor plane using + * drm_crtc_init_with_planes(). + * + * This callback is optional. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*cursor_move)(struct drm_crtc *crtc, int x, int y); + + /** + * @gamma_set: + * + * Set gamma on the CRTC. + * + * This callback is optional. + * + * Atomic drivers who want to support gamma tables should implement the + * atomic color management support, enabled by calling + * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma + * interface through the drm_atomic_helper_legacy_gamma_set() + * compatibility implementation. + */ + int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t size, + struct drm_modeset_acquire_ctx *ctx); + + /** + * @destroy: + * + * Clean up plane resources. This is only called at driver unload time + * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged + * in DRM. + */ + void (*destroy)(struct drm_crtc *crtc); + + /** + * @set_config: + * + * This is the main legacy entry point to change the modeset state on a + * CRTC. All the details of the desired configuration are passed in a + * &struct drm_mode_set - see there for details. + * + * Drivers implementing atomic modeset should use + * drm_atomic_helper_set_config() to implement this hook. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_config)(struct drm_mode_set *set, + struct drm_modeset_acquire_ctx *ctx); + + /** + * @page_flip: + * + * Legacy entry point to schedule a flip to the given framebuffer. + * + * Page flipping is a synchronization mechanism that replaces the frame + * buffer being scanned out by the CRTC with a new frame buffer during + * vertical blanking, avoiding tearing (except when requested otherwise + * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application + * requests a page flip the DRM core verifies that the new frame buffer + * is large enough to be scanned out by the CRTC in the currently + * configured mode and then calls this hook with a pointer to the new + * frame buffer. + * + * The driver must wait for any pending rendering to the new framebuffer + * to complete before executing the flip. It should also wait for any + * pending rendering from other drivers if the underlying buffer is a + * shared dma-buf. + * + * An application can request to be notified when the page flip has + * completed. The drm core will supply a &struct drm_event in the event + * parameter in this case. This can be handled by the + * drm_crtc_send_vblank_event() function, which the driver should call on + * the provided event upon completion of the flip. Note that if + * the driver supports vblank signalling and timestamping the vblank + * counters and timestamps must agree with the ones returned from page + * flip events. With the current vblank helper infrastructure this can + * be achieved by holding a vblank reference while the page flip is + * pending, acquired through drm_crtc_vblank_get() and released with + * drm_crtc_vblank_put(). Drivers are free to implement their own vblank + * counter and timestamp tracking though, e.g. if they have accurate + * timestamp registers in hardware. + * + * This callback is optional. + * + * NOTE: + * + * Very early versions of the KMS ABI mandated that the driver must + * block (but not reject) any rendering to the old framebuffer until the + * flip operation has completed and the old framebuffer is no longer + * visible. This requirement has been lifted, and userspace is instead + * expected to request delivery of an event and wait with recycling old + * buffers until such has been received. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. Note that if a + * page flip operation is already pending the callback should return + * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode + * or just runtime disabled through DPMS respectively the new atomic + * "ACTIVE" state) should result in an -EINVAL error code. Note that + * drm_atomic_helper_page_flip() checks this already for atomic drivers. + */ + int (*page_flip)(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t flags, + struct drm_modeset_acquire_ctx *ctx); + + /** + * @page_flip_target: + * + * Same as @page_flip but with an additional parameter specifying the + * absolute target vertical blank period (as reported by + * drm_crtc_vblank_count()) when the flip should take effect. + * + * Note that the core code calls drm_crtc_vblank_get before this entry + * point, and will call drm_crtc_vblank_put if this entry point returns + * any non-0 error code. It's the driver's responsibility to call + * drm_crtc_vblank_put after this entry point returns 0, typically when + * the flip completes. + */ + int (*page_flip_target)(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t flags, uint32_t target, + struct drm_modeset_acquire_ctx *ctx); + + /** + * @set_property: + * + * This is the legacy entry point to update a property attached to the + * CRTC. + * + * This callback is optional if the driver does not support any legacy + * driver-private properties. For atomic drivers it is not used because + * property handling is done entirely in the DRM core. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_property)(struct drm_crtc *crtc, + struct drm_property *property, uint64_t val); + + /** + * @atomic_duplicate_state: + * + * Duplicate the current atomic state for this CRTC and return it. + * The core and helpers guarantee that any atomic state duplicated with + * this hook and still owned by the caller (i.e. not transferred to the + * driver by calling &drm_mode_config_funcs.atomic_commit) will be + * cleaned up by calling the @atomic_destroy_state hook in this + * structure. + * + * This callback is mandatory for atomic drivers. + * + * Atomic drivers which don't subclass &struct drm_crtc_state should use + * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the + * state structure to extend it with driver-private state should use + * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is + * duplicated in a consistent fashion across drivers. + * + * It is an error to call this hook before &drm_crtc.state has been + * initialized correctly. + * + * NOTE: + * + * If the duplicate state references refcounted resources this hook must + * acquire a reference for each of them. The driver must release these + * references again in @atomic_destroy_state. + * + * RETURNS: + * + * Duplicated atomic state or NULL when the allocation failed. + */ + struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); + + /** + * @atomic_destroy_state: + * + * Destroy a state duplicated with @atomic_duplicate_state and release + * or unreference all resources it references + * + * This callback is mandatory for atomic drivers. + */ + void (*atomic_destroy_state)(struct drm_crtc *crtc, + struct drm_crtc_state *state); + + /** + * @atomic_set_property: + * + * Decode a driver-private property value and store the decoded value + * into the passed-in state structure. Since the atomic core decodes all + * standardized properties (even for extensions beyond the core set of + * properties which might not be implemented by all drivers) this + * requires drivers to subclass the state structure. + * + * Such driver-private properties should really only be implemented for + * truly hardware/vendor specific state. Instead it is preferred to + * standardize atomic extension and decode the properties used to expose + * such an extension in the core. + * + * Do not call this function directly, use + * drm_atomic_crtc_set_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * NOTE: + * + * This function is called in the state assembly phase of atomic + * modesets, which can be aborted for any reason (including on + * userspace's request to just check whether a configuration would be + * possible). Drivers MUST NOT touch any persistent state (hardware or + * software) or data structures except the passed in @state parameter. + * + * Also since userspace controls in which order properties are set this + * function must not do any input validation (since the state update is + * incomplete and hence likely inconsistent). Instead any such input + * validation must be done in the various atomic_check callbacks. + * + * RETURNS: + * + * 0 if the property has been found, -EINVAL if the property isn't + * implemented by the driver (which should never happen, the core only + * asks for properties attached to this CRTC). No other validation is + * allowed by the driver. The core already checks that the property + * value is within the range (integer, valid enum value, ...) the driver + * set when registering the property. + */ + int (*atomic_set_property)(struct drm_crtc *crtc, + struct drm_crtc_state *state, + struct drm_property *property, + uint64_t val); + /** + * @atomic_get_property: + * + * Reads out the decoded driver-private property. This is used to + * implement the GETCRTC IOCTL. + * + * Do not call this function directly, use + * drm_atomic_crtc_get_property() instead. + * + * This callback is optional if the driver does not support any + * driver-private atomic properties. + * + * RETURNS: + * + * 0 on success, -EINVAL if the property isn't implemented by the + * driver (which should never happen, the core only asks for + * properties attached to this CRTC). + */ + int (*atomic_get_property)(struct drm_crtc *crtc, + const struct drm_crtc_state *state, + struct drm_property *property, + uint64_t *val); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the crtc like debugfs interfaces. + * It is called late in the driver load sequence from drm_dev_register(). + * Everything added from this callback should be unregistered in + * the early_unregister callback. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_crtc *crtc); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the crtc from + * @late_register. It is called from drm_dev_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + */ + void (*early_unregister)(struct drm_crtc *crtc); + + /** + * @set_crc_source: + * + * Changes the source of CRC checksums of frames at the request of + * userspace, typically for testing purposes. The sources available are + * specific of each driver and a %NULL value indicates that CRC + * generation is to be switched off. + * + * When CRC generation is enabled, the driver should call + * drm_crtc_add_crc_entry() at each frame, providing any information + * that characterizes the frame contents in the crcN arguments, as + * provided from the configured source. Drivers must accept an "auto" + * source name that will select a default source for this CRTC. + * + * Note that "auto" can depend upon the current modeset configuration, + * e.g. it could pick an encoder or output specific CRC sampling point. + * + * This callback is optional if the driver does not support any CRC + * generation functionality. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*set_crc_source)(struct drm_crtc *crtc, const char *source, + size_t *values_cnt); + + /** + * @atomic_print_state: + * + * If driver subclasses &struct drm_crtc_state, it should implement + * this optional hook for printing additional driver specific state. + * + * Do not call this directly, use drm_atomic_crtc_print_state() + * instead. + */ + void (*atomic_print_state)(struct drm_printer *p, + const struct drm_crtc_state *state); + + /** + * @get_vblank_counter: + * + * Driver callback for fetching a raw hardware vblank counter for the + * CRTC. It's meant to be used by new drivers as the replacement of + * &drm_driver.get_vblank_counter hook. + * + * This callback is optional. If a device doesn't have a hardware + * counter, the driver can simply leave the hook as NULL. The DRM core + * will account for missed vblank events while interrupts where disabled + * based on system timestamps. + * + * Wraparound handling and loss of events due to modesetting is dealt + * with in the DRM core code, as long as drivers call + * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or + * enabling a CRTC. + * + * See also &drm_device.vblank_disable_immediate and + * &drm_device.max_vblank_count. + * + * Returns: + * + * Raw vblank counter value. + */ + u32 (*get_vblank_counter)(struct drm_crtc *crtc); + + /** + * @enable_vblank: + * + * Enable vblank interrupts for the CRTC. It's meant to be used by + * new drivers as the replacement of &drm_driver.enable_vblank hook. + * + * Returns: + * + * Zero on success, appropriate errno if the vblank interrupt cannot + * be enabled. + */ + int (*enable_vblank)(struct drm_crtc *crtc); + + /** + * @disable_vblank: + * + * Disable vblank interrupts for the CRTC. It's meant to be used by + * new drivers as the replacement of &drm_driver.disable_vblank hook. + */ + void (*disable_vblank)(struct drm_crtc *crtc); +}; + +/** + * struct drm_crtc - central CRTC control structure + * + * Each CRTC may have one or more connectors associated with it. This structure + * allows the CRTC to be controlled. + */ +struct drm_crtc { + /** @dev: parent DRM device */ + struct drm_device *dev; + /** @port: OF node used by drm_of_find_possible_crtcs(). */ + struct device_node *port; + /** + * @head: + * + * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list. + * Invariant over the lifetime of @dev and therefore does not need + * locking. + */ + struct list_head head; + + /** @name: human readable name, can be overwritten by the driver */ + char *name; + + /** + * @mutex: + * + * This provides a read lock for the overall CRTC state (mode, dpms + * state, ...) and a write lock for everything which can be update + * without a full modeset (fb, cursor data, CRTC properties ...). A full + * modeset also need to grab &drm_mode_config.connection_mutex. + * + * For atomic drivers specifically this protects @state. + */ + struct drm_modeset_lock mutex; + + /** @base: base KMS object for ID tracking etc. */ + struct drm_mode_object base; + + /** + * @primary: + * Primary plane for this CRTC. Note that this is only + * relevant for legacy IOCTL, it specifies the plane implicitly used by + * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance + * beyond that. + */ + struct drm_plane *primary; + + /** + * @cursor: + * Cursor plane for this CRTC. Note that this is only relevant for + * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR + * and SETCURSOR2 IOCTLs. It does not have any significance + * beyond that. + */ + struct drm_plane *cursor; + + /** + * @index: Position inside the mode_config.list, can be used as an array + * index. It is invariant over the lifetime of the CRTC. + */ + unsigned index; + + /** + * @cursor_x: Current x position of the cursor, used for universal + * cursor planes because the SETCURSOR IOCTL only can update the + * framebuffer without supplying the coordinates. Drivers should not use + * this directly, atomic drivers should look at &drm_plane_state.crtc_x + * of the cursor plane instead. + */ + int cursor_x; + /** + * @cursor_y: Current y position of the cursor, used for universal + * cursor planes because the SETCURSOR IOCTL only can update the + * framebuffer without supplying the coordinates. Drivers should not use + * this directly, atomic drivers should look at &drm_plane_state.crtc_y + * of the cursor plane instead. + */ + int cursor_y; + + /** + * @enabled: + * + * Is this CRTC enabled? Should only be used by legacy drivers, atomic + * drivers should instead consult &drm_crtc_state.enable and + * &drm_crtc_state.active. Atomic drivers can update this by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + bool enabled; + + /** + * @mode: + * + * Current mode timings. Should only be used by legacy drivers, atomic + * drivers should instead consult &drm_crtc_state.mode. Atomic drivers + * can update this by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + struct drm_display_mode mode; + + /** + * @hwmode: + * + * Programmed mode in hw, after adjustments for encoders, crtc, panel + * scaling etc. Should only be used by legacy drivers, for high + * precision vblank timestamps in + * drm_calc_vbltimestamp_from_scanoutpos(). + * + * Note that atomic drivers should not use this, but instead use + * &drm_crtc_state.adjusted_mode. And for high-precision timestamps + * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode, + * which is filled out by calling drm_calc_timestamping_constants(). + */ + struct drm_display_mode hwmode; + + /** + * @x: + * x position on screen. Should only be used by legacy drivers, atomic + * drivers should look at &drm_plane_state.crtc_x of the primary plane + * instead. Updated by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + int x; + /** + * @y: + * y position on screen. Should only be used by legacy drivers, atomic + * drivers should look at &drm_plane_state.crtc_y of the primary plane + * instead. Updated by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + int y; + + /** @funcs: CRTC control functions */ + const struct drm_crtc_funcs *funcs; + + /** + * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up + * by calling drm_mode_crtc_set_gamma_size(). + */ + uint32_t gamma_size; + + /** + * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and + * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size(). + */ + uint16_t *gamma_store; + + /** @helper_private: mid-layer private data */ + const struct drm_crtc_helper_funcs *helper_private; + + /** @properties: property tracking for this CRTC */ + struct drm_object_properties properties; + + /** + * @state: + * + * Current atomic state for this CRTC. + * + * This is protected by @mutex. Note that nonblocking atomic commits + * access the current CRTC state without taking locks. Either by going + * through the &struct drm_atomic_state pointers, see + * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and + * for_each_new_crtc_in_state(). Or through careful ordering of atomic + * commit operations as implemented in the atomic helpers, see + * &struct drm_crtc_commit. + */ + struct drm_crtc_state *state; + + /** + * @commit_list: + * + * List of &drm_crtc_commit structures tracking pending commits. + * Protected by @commit_lock. This list holds its own full reference, + * as does the ongoing commit. + * + * "Note that the commit for a state change is also tracked in + * &drm_crtc_state.commit. For accessing the immediately preceding + * commit in an atomic update it is recommended to just use that + * pointer in the old CRTC state, since accessing that doesn't need + * any locking or list-walking. @commit_list should only be used to + * stall for framebuffer cleanup that's signalled through + * &drm_crtc_commit.cleanup_done." + */ + struct list_head commit_list; + + /** + * @commit_lock: + * + * Spinlock to protect @commit_list. + */ + spinlock_t commit_lock; + +#ifdef CONFIG_DEBUG_FS + /** + * @debugfs_entry: + * + * Debugfs directory for this CRTC. + */ + struct dentry *debugfs_entry; +#endif + + /** + * @crc: + * + * Configuration settings of CRC capture. + */ + struct drm_crtc_crc crc; + + /** + * @fence_context: + * + * timeline context used for fence operations. + */ + unsigned int fence_context; + + /** + * @fence_lock: + * + * spinlock to protect the fences in the fence_context. + */ + spinlock_t fence_lock; + /** + * @fence_seqno: + * + * Seqno variable used as monotonic counter for the fences + * created on the CRTC's timeline. + */ + unsigned long fence_seqno; + + /** + * @timeline_name: + * + * The name of the CRTC's fence timeline. + */ + char timeline_name[32]; +}; + +/** + * struct drm_mode_set - new values for a CRTC config change + * @fb: framebuffer to use for new config + * @crtc: CRTC whose configuration we're about to change + * @mode: mode timings to use + * @x: position of this CRTC relative to @fb + * @y: position of this CRTC relative to @fb + * @connectors: array of connectors to drive with this CRTC if possible + * @num_connectors: size of @connectors array + * + * This represents a modeset configuration for the legacy SETCRTC ioctl and is + * also used internally. Atomic drivers instead use &drm_atomic_state. + */ +struct drm_mode_set { + struct drm_framebuffer *fb; + struct drm_crtc *crtc; + struct drm_display_mode *mode; + + uint32_t x; + uint32_t y; + + struct drm_connector **connectors; + size_t num_connectors; +}; + +#define obj_to_crtc(x) container_of(x, struct drm_crtc, base) + +__printf(6, 7) +int drm_crtc_init_with_planes(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_plane *primary, + struct drm_plane *cursor, + const struct drm_crtc_funcs *funcs, + const char *name, ...); +void drm_crtc_cleanup(struct drm_crtc *crtc); + +/** + * drm_crtc_index - find the index of a registered CRTC + * @crtc: CRTC to find index for + * + * Given a registered CRTC, return the index of that CRTC within a DRM + * device's list of CRTCs. + */ +static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc) +{ + return crtc->index; +} + +/** + * drm_crtc_mask - find the mask of a registered CRTC + * @crtc: CRTC to find mask for + * + * Given a registered CRTC, return the mask bit of that CRTC for the + * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields. + */ +static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc) +{ + return 1 << drm_crtc_index(crtc); +} + +int drm_crtc_force_disable(struct drm_crtc *crtc); +int drm_crtc_force_disable_all(struct drm_device *dev); + +int drm_mode_set_config_internal(struct drm_mode_set *set); +struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx); + +/** + * drm_crtc_find - look up a CRTC object from its ID + * @dev: DRM device + * @file_priv: drm file to check for lease against. + * @id: &drm_mode_object ID + * + * This can be used to look up a CRTC from its userspace ID. Only used by + * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS + * userspace interface should be done using &drm_property. + */ +static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, + struct drm_file *file_priv, + uint32_t id) +{ + struct drm_mode_object *mo; + mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC); + return mo ? obj_to_crtc(mo) : NULL; +} + +/** + * drm_for_each_crtc - iterate over all CRTCs + * @crtc: a &struct drm_crtc as the loop cursor + * @dev: the &struct drm_device + * + * Iterate over all CRTCs of @dev. + */ +#define drm_for_each_crtc(crtc, dev) \ + list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) + +#endif /* __DRM_CRTC_H__ */ |