diff options
Diffstat (limited to 'include/media/v4l2-dv-timings.h')
| -rw-r--r-- | include/media/v4l2-dv-timings.h | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h new file mode 100644 index 000000000..4e7732d39 --- /dev/null +++ b/include/media/v4l2-dv-timings.h @@ -0,0 +1,243 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-dv-timings - Internal header with dv-timings helper functions + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef __V4L2_DV_TIMINGS_H +#define __V4L2_DV_TIMINGS_H + +#include <linux/videodev2.h> + +/* + * v4l2_dv_timings_presets: list of all dv_timings presets. + */ +extern const struct v4l2_dv_timings v4l2_dv_timings_presets[]; + +/** + * typedef v4l2_check_dv_timings_fnc - timings check callback + * + * @t: the v4l2_dv_timings struct. + * @handle: a handle from the driver. + * + * Returns true if the given timings are valid. + */ +typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle); + +/** + * v4l2_valid_dv_timings() - are these timings valid? + * + * @t: the v4l2_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * Returns true if the given dv_timings struct is supported by the + * hardware capabilities and the callback function (if non-NULL), returns + * false otherwise. + */ +bool v4l2_valid_dv_timings(const struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_enum_dv_timings_cap() - Helper function to enumerate possible DV + * timings based on capabilities + * + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This enumerates dv_timings using the full list of possible CEA-861 and DMT + * timings, filtering out any timings that are not supported based on the + * hardware capabilities and the callback function (if non-NULL). + * + * If a valid timing for the given index is found, it will fill in @t and + * return 0, otherwise it returns -EINVAL. + */ +int v4l2_enum_dv_timings_cap(struct v4l2_enum_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_find_dv_timings_cap() - Find the closest timings struct + * + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @pclock_delta: maximum delta between t->pixelclock and the timing struct + * under consideration. + * @fnc: callback to check if a given timings struct is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This function tries to map the given timings to an entry in the + * full list of possible CEA-861 and DMT timings, filtering out any timings + * that are not supported based on the hardware capabilities and the callback + * function (if non-NULL). + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + unsigned pclock_delta, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_find_dv_timings_cea861_vic() - find timings based on CEA-861 VIC + * @t: the timings data. + * @vic: CEA-861 VIC code + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic); + +/** + * v4l2_match_dv_timings() - do two timings match? + * + * @measured: the measured timings data. + * @standard: the timings according to the standard. + * @pclock_delta: maximum delta in Hz between standard->pixelclock and + * the measured timings. + * @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not + * match. + * + * Returns true if the two timings match, returns false otherwise. + */ +bool v4l2_match_dv_timings(const struct v4l2_dv_timings *measured, + const struct v4l2_dv_timings *standard, + unsigned pclock_delta, bool match_reduced_fps); + +/** + * v4l2_print_dv_timings() - log the contents of a dv_timings struct + * @dev_prefix:device prefix for each log line. + * @prefix: additional prefix for each log line, may be NULL. + * @t: the timings data. + * @detailed: if true, give a detailed log. + */ +void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, + const struct v4l2_dv_timings *t, bool detailed); + +/** + * v4l2_detect_cvt - detect if the given timings follow the CVT standard + * + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @active_width: active width of image (does not include blanking). This + * information is needed only in case of version 2 of reduced blanking. + * In other cases, this parameter does not have any effect on timings. + * @polarities: the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @interlaced: if this flag is true, it indicates interlaced format + * @fmt: the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid CVT format. If so, then it will return true, and fmt will be filled + * in with the found CVT timings. + */ +bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, + unsigned active_width, u32 polarities, bool interlaced, + struct v4l2_dv_timings *fmt); + +/** + * v4l2_detect_gtf - detect if the given timings follow the GTF standard + * + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @polarities: the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @interlaced: if this flag is true, it indicates interlaced format + * @aspect: preferred aspect ratio. GTF has no method of determining the + * aspect ratio in order to derive the image width from the + * image height, so it has to be passed explicitly. Usually + * the native screen aspect ratio is used for this. If it + * is not filled in correctly, then 16:9 will be assumed. + * @fmt: the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid GTF format. If so, then it will return true, and fmt will be filled + * in with the found GTF timings. + */ +bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, + u32 polarities, bool interlaced, struct v4l2_fract aspect, + struct v4l2_dv_timings *fmt); + +/** + * v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes + * 0x15 and 0x16 from the EDID. + * + * @hor_landscape: byte 0x15 from the EDID. + * @vert_portrait: byte 0x16 from the EDID. + * + * Determines the aspect ratio from the EDID. + * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2: + * "Horizontal and Vertical Screen Size or Aspect Ratio" + */ +struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait); + +/** + * v4l2_dv_timings_aspect_ratio - calculate the aspect ratio based on the + * v4l2_dv_timings information. + * + * @t: the timings data. + */ +struct v4l2_fract v4l2_dv_timings_aspect_ratio(const struct v4l2_dv_timings *t); + +/** + * can_reduce_fps - check if conditions for reduced fps are true. + * @bt: v4l2 timing structure + * + * For different timings reduced fps is allowed if the following conditions + * are met: + * + * - For CVT timings: if reduced blanking v2 (vsync == 8) is true. + * - For CEA861 timings: if %V4L2_DV_FL_CAN_REDUCE_FPS flag is true. + */ +static inline bool can_reduce_fps(struct v4l2_bt_timings *bt) +{ + if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8)) + return true; + + if ((bt->standards & V4L2_DV_BT_STD_CEA861) && + (bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS)) + return true; + + return false; +} + +/** + * struct v4l2_hdmi_rx_colorimetry - describes the HDMI colorimetry information + * @colorspace: enum v4l2_colorspace, the colorspace + * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @quantization: enum v4l2_quantization, colorspace quantization + * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + */ +struct v4l2_hdmi_colorimetry { + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_quantization quantization; + enum v4l2_xfer_func xfer_func; +}; + +struct hdmi_avi_infoframe; +struct hdmi_vendor_infoframe; + +struct v4l2_hdmi_colorimetry +v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi, + const struct hdmi_vendor_infoframe *hdmi, + unsigned int height); + +u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size, + unsigned int *offset); +void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr); +u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input); +int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port); + +#endif |