diff options
Diffstat (limited to 'kernel/debug/gdbstub.c')
-rw-r--r-- | kernel/debug/gdbstub.c | 1146 |
1 files changed, 1146 insertions, 0 deletions
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c new file mode 100644 index 000000000..7510dc687 --- /dev/null +++ b/kernel/debug/gdbstub.c @@ -0,0 +1,1146 @@ +/* + * Kernel Debug Core + * + * Maintainer: Jason Wessel <jason.wessel@windriver.com> + * + * Copyright (C) 2000-2001 VERITAS Software Corporation. + * Copyright (C) 2002-2004 Timesys Corporation + * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> + * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz> + * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> + * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. + * Copyright (C) 2005-2009 Wind River Systems, Inc. + * Copyright (C) 2007 MontaVista Software, Inc. + * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> + * + * Contributors at various stages not listed above: + * Jason Wessel ( jason.wessel@windriver.com ) + * George Anzinger <george@mvista.com> + * Anurekh Saxena (anurekh.saxena@timesys.com) + * Lake Stevens Instrument Division (Glenn Engel) + * Jim Kingdon, Cygnus Support. + * + * Original KGDB stub: David Grothe <dave@gcom.com>, + * Tigran Aivazian <tigran@sco.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/sched/signal.h> +#include <linux/kgdb.h> +#include <linux/kdb.h> +#include <linux/serial_core.h> +#include <linux/reboot.h> +#include <linux/uaccess.h> +#include <asm/cacheflush.h> +#include <asm/unaligned.h> +#include "debug_core.h" + +#define KGDB_MAX_THREAD_QUERY 17 + +/* Our I/O buffers. */ +static char remcom_in_buffer[BUFMAX]; +static char remcom_out_buffer[BUFMAX]; +static int gdbstub_use_prev_in_buf; +static int gdbstub_prev_in_buf_pos; + +/* Storage for the registers, in GDB format. */ +static unsigned long gdb_regs[(NUMREGBYTES + + sizeof(unsigned long) - 1) / + sizeof(unsigned long)]; + +/* + * GDB remote protocol parser: + */ + +#ifdef CONFIG_KGDB_KDB +static int gdbstub_read_wait(void) +{ + int ret = -1; + int i; + + if (unlikely(gdbstub_use_prev_in_buf)) { + if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf) + return remcom_in_buffer[gdbstub_prev_in_buf_pos++]; + else + gdbstub_use_prev_in_buf = 0; + } + + /* poll any additional I/O interfaces that are defined */ + while (ret < 0) + for (i = 0; kdb_poll_funcs[i] != NULL; i++) { + ret = kdb_poll_funcs[i](); + if (ret > 0) + break; + } + return ret; +} +#else +static int gdbstub_read_wait(void) +{ + int ret = dbg_io_ops->read_char(); + while (ret == NO_POLL_CHAR) + ret = dbg_io_ops->read_char(); + return ret; +} +#endif +/* scan for the sequence $<data>#<checksum> */ +static void get_packet(char *buffer) +{ + unsigned char checksum; + unsigned char xmitcsum; + int count; + char ch; + + do { + /* + * Spin and wait around for the start character, ignore all + * other characters: + */ + while ((ch = (gdbstub_read_wait())) != '$') + /* nothing */; + + kgdb_connected = 1; + checksum = 0; + xmitcsum = -1; + + count = 0; + + /* + * now, read until a # or end of buffer is found: + */ + while (count < (BUFMAX - 1)) { + ch = gdbstub_read_wait(); + if (ch == '#') + break; + checksum = checksum + ch; + buffer[count] = ch; + count = count + 1; + } + + if (ch == '#') { + xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4; + xmitcsum += hex_to_bin(gdbstub_read_wait()); + + if (checksum != xmitcsum) + /* failed checksum */ + dbg_io_ops->write_char('-'); + else + /* successful transfer */ + dbg_io_ops->write_char('+'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + } + buffer[count] = 0; + } while (checksum != xmitcsum); +} + +/* + * Send the packet in buffer. + * Check for gdb connection if asked for. + */ +static void put_packet(char *buffer) +{ + unsigned char checksum; + int count; + char ch; + + /* + * $<packet info>#<checksum>. + */ + while (1) { + dbg_io_ops->write_char('$'); + checksum = 0; + count = 0; + + while ((ch = buffer[count])) { + dbg_io_ops->write_char(ch); + checksum += ch; + count++; + } + + dbg_io_ops->write_char('#'); + dbg_io_ops->write_char(hex_asc_hi(checksum)); + dbg_io_ops->write_char(hex_asc_lo(checksum)); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + + /* Now see what we get in reply. */ + ch = gdbstub_read_wait(); + + if (ch == 3) + ch = gdbstub_read_wait(); + + /* If we get an ACK, we are done. */ + if (ch == '+') + return; + + /* + * If we get the start of another packet, this means + * that GDB is attempting to reconnect. We will NAK + * the packet being sent, and stop trying to send this + * packet. + */ + if (ch == '$') { + dbg_io_ops->write_char('-'); + if (dbg_io_ops->flush) + dbg_io_ops->flush(); + return; + } + } +} + +static char gdbmsgbuf[BUFMAX + 1]; + +void gdbstub_msg_write(const char *s, int len) +{ + char *bufptr; + int wcount; + int i; + + if (len == 0) + len = strlen(s); + + /* 'O'utput */ + gdbmsgbuf[0] = 'O'; + + /* Fill and send buffers... */ + while (len > 0) { + bufptr = gdbmsgbuf + 1; + + /* Calculate how many this time */ + if ((len << 1) > (BUFMAX - 2)) + wcount = (BUFMAX - 2) >> 1; + else + wcount = len; + + /* Pack in hex chars */ + for (i = 0; i < wcount; i++) + bufptr = hex_byte_pack(bufptr, s[i]); + *bufptr = '\0'; + + /* Move up */ + s += wcount; + len -= wcount; + + /* Write packet */ + put_packet(gdbmsgbuf); + } +} + +/* + * Convert the memory pointed to by mem into hex, placing result in + * buf. Return a pointer to the last char put in buf (null). May + * return an error. + */ +char *kgdb_mem2hex(char *mem, char *buf, int count) +{ + char *tmp; + int err; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory copy. Hex conversion will work against this one. + */ + tmp = buf + count; + + err = probe_kernel_read(tmp, mem, count); + if (err) + return NULL; + while (count > 0) { + buf = hex_byte_pack(buf, *tmp); + tmp++; + count--; + } + *buf = 0; + + return buf; +} + +/* + * Convert the hex array pointed to by buf into binary to be placed in + * mem. Return a pointer to the character AFTER the last byte + * written. May return an error. + */ +int kgdb_hex2mem(char *buf, char *mem, int count) +{ + char *tmp_raw; + char *tmp_hex; + + /* + * We use the upper half of buf as an intermediate buffer for the + * raw memory that is converted from hex. + */ + tmp_raw = buf + count * 2; + + tmp_hex = tmp_raw - 1; + while (tmp_hex >= buf) { + tmp_raw--; + *tmp_raw = hex_to_bin(*tmp_hex--); + *tmp_raw |= hex_to_bin(*tmp_hex--) << 4; + } + + return probe_kernel_write(mem, tmp_raw, count); +} + +/* + * While we find nice hex chars, build a long_val. + * Return number of chars processed. + */ +int kgdb_hex2long(char **ptr, unsigned long *long_val) +{ + int hex_val; + int num = 0; + int negate = 0; + + *long_val = 0; + + if (**ptr == '-') { + negate = 1; + (*ptr)++; + } + while (**ptr) { + hex_val = hex_to_bin(**ptr); + if (hex_val < 0) + break; + + *long_val = (*long_val << 4) | hex_val; + num++; + (*ptr)++; + } + + if (negate) + *long_val = -*long_val; + + return num; +} + +/* + * Copy the binary array pointed to by buf into mem. Fix $, #, and + * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. + * The input buf is overwitten with the result to write to mem. + */ +static int kgdb_ebin2mem(char *buf, char *mem, int count) +{ + int size = 0; + char *c = buf; + + while (count-- > 0) { + c[size] = *buf++; + if (c[size] == 0x7d) + c[size] = *buf++ ^ 0x20; + size++; + } + + return probe_kernel_write(mem, c, size); +} + +#if DBG_MAX_REG_NUM > 0 +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int i; + int idx = 0; + char *ptr = (char *)gdb_regs; + + for (i = 0; i < DBG_MAX_REG_NUM; i++) { + dbg_get_reg(i, ptr + idx, regs); + idx += dbg_reg_def[i].size; + } +} + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int i; + int idx = 0; + char *ptr = (char *)gdb_regs; + + for (i = 0; i < DBG_MAX_REG_NUM; i++) { + dbg_set_reg(i, ptr + idx, regs); + idx += dbg_reg_def[i].size; + } +} +#endif /* DBG_MAX_REG_NUM > 0 */ + +/* Write memory due to an 'M' or 'X' packet. */ +static int write_mem_msg(int binary) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long addr; + unsigned long length; + int err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && + kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { + if (binary) + err = kgdb_ebin2mem(ptr, (char *)addr, length); + else + err = kgdb_hex2mem(ptr, (char *)addr, length); + if (err) + return err; + if (CACHE_FLUSH_IS_SAFE) + flush_icache_range(addr, addr + length); + return 0; + } + + return -EINVAL; +} + +static void error_packet(char *pkt, int error) +{ + error = -error; + pkt[0] = 'E'; + pkt[1] = hex_asc[(error / 10)]; + pkt[2] = hex_asc[(error % 10)]; + pkt[3] = '\0'; +} + +/* + * Thread ID accessors. We represent a flat TID space to GDB, where + * the per CPU idle threads (which under Linux all have PID 0) are + * remapped to negative TIDs. + */ + +#define BUF_THREAD_ID_SIZE 8 + +static char *pack_threadid(char *pkt, unsigned char *id) +{ + unsigned char *limit; + int lzero = 1; + + limit = id + (BUF_THREAD_ID_SIZE / 2); + while (id < limit) { + if (!lzero || *id != 0) { + pkt = hex_byte_pack(pkt, *id); + lzero = 0; + } + id++; + } + + if (lzero) + pkt = hex_byte_pack(pkt, 0); + + return pkt; +} + +static void int_to_threadref(unsigned char *id, int value) +{ + put_unaligned_be32(value, id); +} + +static struct task_struct *getthread(struct pt_regs *regs, int tid) +{ + /* + * Non-positive TIDs are remapped to the cpu shadow information + */ + if (tid == 0 || tid == -1) + tid = -atomic_read(&kgdb_active) - 2; + if (tid < -1 && tid > -NR_CPUS - 2) { + if (kgdb_info[-tid - 2].task) + return kgdb_info[-tid - 2].task; + else + return idle_task(-tid - 2); + } + if (tid <= 0) { + printk(KERN_ERR "KGDB: Internal thread select error\n"); + dump_stack(); + return NULL; + } + + /* + * find_task_by_pid_ns() does not take the tasklist lock anymore + * but is nicely RCU locked - hence is a pretty resilient + * thing to use: + */ + return find_task_by_pid_ns(tid, &init_pid_ns); +} + + +/* + * Remap normal tasks to their real PID, + * CPU shadow threads are mapped to -CPU - 2 + */ +static inline int shadow_pid(int realpid) +{ + if (realpid) + return realpid; + + return -raw_smp_processor_id() - 2; +} + +/* + * All the functions that start with gdb_cmd are the various + * operations to implement the handlers for the gdbserial protocol + * where KGDB is communicating with an external debugger + */ + +/* Handle the '?' status packets */ +static void gdb_cmd_status(struct kgdb_state *ks) +{ + /* + * We know that this packet is only sent + * during initial connect. So to be safe, + * we clear out our breakpoints now in case + * GDB is reconnecting. + */ + dbg_remove_all_break(); + + remcom_out_buffer[0] = 'S'; + hex_byte_pack(&remcom_out_buffer[1], ks->signo); +} + +static void gdb_get_regs_helper(struct kgdb_state *ks) +{ + struct task_struct *thread; + void *local_debuggerinfo; + int i; + + thread = kgdb_usethread; + if (!thread) { + thread = kgdb_info[ks->cpu].task; + local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; + } else { + local_debuggerinfo = NULL; + for_each_online_cpu(i) { + /* + * Try to find the task on some other + * or possibly this node if we do not + * find the matching task then we try + * to approximate the results. + */ + if (thread == kgdb_info[i].task) + local_debuggerinfo = kgdb_info[i].debuggerinfo; + } + } + + /* + * All threads that don't have debuggerinfo should be + * in schedule() sleeping, since all other CPUs + * are in kgdb_wait, and thus have debuggerinfo. + */ + if (local_debuggerinfo) { + pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); + } else { + /* + * Pull stuff saved during switch_to; nothing + * else is accessible (or even particularly + * relevant). + * + * This should be enough for a stack trace. + */ + sleeping_thread_to_gdb_regs(gdb_regs, thread); + } +} + +/* Handle the 'g' get registers request */ +static void gdb_cmd_getregs(struct kgdb_state *ks) +{ + gdb_get_regs_helper(ks); + kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); +} + +/* Handle the 'G' set registers request */ +static void gdb_cmd_setregs(struct kgdb_state *ks) +{ + kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); + + if (kgdb_usethread && kgdb_usethread != current) { + error_packet(remcom_out_buffer, -EINVAL); + } else { + gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); + strcpy(remcom_out_buffer, "OK"); + } +} + +/* Handle the 'm' memory read bytes */ +static void gdb_cmd_memread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + unsigned long length; + unsigned long addr; + char *err; + + if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && + kgdb_hex2long(&ptr, &length) > 0) { + err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); + if (!err) + error_packet(remcom_out_buffer, -EINVAL); + } else { + error_packet(remcom_out_buffer, -EINVAL); + } +} + +/* Handle the 'M' memory write bytes */ +static void gdb_cmd_memwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(0); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +#if DBG_MAX_REG_NUM > 0 +static char *gdb_hex_reg_helper(int regnum, char *out) +{ + int i; + int offset = 0; + + for (i = 0; i < regnum; i++) + offset += dbg_reg_def[i].size; + return kgdb_mem2hex((char *)gdb_regs + offset, out, + dbg_reg_def[i].size); +} + +/* Handle the 'p' individual regster get */ +static void gdb_cmd_reg_get(struct kgdb_state *ks) +{ + unsigned long regnum; + char *ptr = &remcom_in_buffer[1]; + + kgdb_hex2long(&ptr, ®num); + if (regnum >= DBG_MAX_REG_NUM) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + gdb_get_regs_helper(ks); + gdb_hex_reg_helper(regnum, remcom_out_buffer); +} + +/* Handle the 'P' individual regster set */ +static void gdb_cmd_reg_set(struct kgdb_state *ks) +{ + unsigned long regnum; + char *ptr = &remcom_in_buffer[1]; + int i = 0; + + kgdb_hex2long(&ptr, ®num); + if (*ptr++ != '=' || + !(!kgdb_usethread || kgdb_usethread == current) || + !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + memset(gdb_regs, 0, sizeof(gdb_regs)); + while (i < sizeof(gdb_regs) * 2) + if (hex_to_bin(ptr[i]) >= 0) + i++; + else + break; + i = i / 2; + kgdb_hex2mem(ptr, (char *)gdb_regs, i); + dbg_set_reg(regnum, gdb_regs, ks->linux_regs); + strcpy(remcom_out_buffer, "OK"); +} +#endif /* DBG_MAX_REG_NUM > 0 */ + +/* Handle the 'X' memory binary write bytes */ +static void gdb_cmd_binwrite(struct kgdb_state *ks) +{ + int err = write_mem_msg(1); + + if (err) + error_packet(remcom_out_buffer, err); + else + strcpy(remcom_out_buffer, "OK"); +} + +/* Handle the 'D' or 'k', detach or kill packets */ +static void gdb_cmd_detachkill(struct kgdb_state *ks) +{ + int error; + + /* The detach case */ + if (remcom_in_buffer[0] == 'D') { + error = dbg_remove_all_break(); + if (error < 0) { + error_packet(remcom_out_buffer, error); + } else { + strcpy(remcom_out_buffer, "OK"); + kgdb_connected = 0; + } + put_packet(remcom_out_buffer); + } else { + /* + * Assume the kill case, with no exit code checking, + * trying to force detach the debugger: + */ + dbg_remove_all_break(); + kgdb_connected = 0; + } +} + +/* Handle the 'R' reboot packets */ +static int gdb_cmd_reboot(struct kgdb_state *ks) +{ + /* For now, only honor R0 */ + if (strcmp(remcom_in_buffer, "R0") == 0) { + printk(KERN_CRIT "Executing emergency reboot\n"); + strcpy(remcom_out_buffer, "OK"); + put_packet(remcom_out_buffer); + + /* + * Execution should not return from + * machine_emergency_restart() + */ + machine_emergency_restart(); + kgdb_connected = 0; + + return 1; + } + return 0; +} + +/* Handle the 'q' query packets */ +static void gdb_cmd_query(struct kgdb_state *ks) +{ + struct task_struct *g; + struct task_struct *p; + unsigned char thref[BUF_THREAD_ID_SIZE]; + char *ptr; + int i; + int cpu; + int finished = 0; + + switch (remcom_in_buffer[1]) { + case 's': + case 'f': + if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) + break; + + i = 0; + remcom_out_buffer[0] = 'm'; + ptr = remcom_out_buffer + 1; + if (remcom_in_buffer[1] == 'f') { + /* Each cpu is a shadow thread */ + for_each_online_cpu(cpu) { + ks->thr_query = 0; + int_to_threadref(thref, -cpu - 2); + ptr = pack_threadid(ptr, thref); + *(ptr++) = ','; + i++; + } + } + + do_each_thread(g, p) { + if (i >= ks->thr_query && !finished) { + int_to_threadref(thref, p->pid); + ptr = pack_threadid(ptr, thref); + *(ptr++) = ','; + ks->thr_query++; + if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) + finished = 1; + } + i++; + } while_each_thread(g, p); + + *(--ptr) = '\0'; + break; + + case 'C': + /* Current thread id */ + strcpy(remcom_out_buffer, "QC"); + ks->threadid = shadow_pid(current->pid); + int_to_threadref(thref, ks->threadid); + pack_threadid(remcom_out_buffer + 2, thref); + break; + case 'T': + if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) + break; + + ks->threadid = 0; + ptr = remcom_in_buffer + 17; + kgdb_hex2long(&ptr, &ks->threadid); + if (!getthread(ks->linux_regs, ks->threadid)) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + if ((int)ks->threadid > 0) { + kgdb_mem2hex(getthread(ks->linux_regs, + ks->threadid)->comm, + remcom_out_buffer, 16); + } else { + static char tmpstr[23 + BUF_THREAD_ID_SIZE]; + + sprintf(tmpstr, "shadowCPU%d", + (int)(-ks->threadid - 2)); + kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); + } + break; +#ifdef CONFIG_KGDB_KDB + case 'R': + if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) { + int len = strlen(remcom_in_buffer + 6); + + if ((len % 2) != 0) { + strcpy(remcom_out_buffer, "E01"); + break; + } + kgdb_hex2mem(remcom_in_buffer + 6, + remcom_out_buffer, len); + len = len / 2; + remcom_out_buffer[len++] = 0; + + kdb_common_init_state(ks); + kdb_parse(remcom_out_buffer); + kdb_common_deinit_state(); + + strcpy(remcom_out_buffer, "OK"); + } + break; +#endif + } +} + +/* Handle the 'H' task query packets */ +static void gdb_cmd_task(struct kgdb_state *ks) +{ + struct task_struct *thread; + char *ptr; + + switch (remcom_in_buffer[1]) { + case 'g': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_usethread = thread; + ks->kgdb_usethreadid = ks->threadid; + strcpy(remcom_out_buffer, "OK"); + break; + case 'c': + ptr = &remcom_in_buffer[2]; + kgdb_hex2long(&ptr, &ks->threadid); + if (!ks->threadid) { + kgdb_contthread = NULL; + } else { + thread = getthread(ks->linux_regs, ks->threadid); + if (!thread && ks->threadid > 0) { + error_packet(remcom_out_buffer, -EINVAL); + break; + } + kgdb_contthread = thread; + } + strcpy(remcom_out_buffer, "OK"); + break; + } +} + +/* Handle the 'T' thread query packets */ +static void gdb_cmd_thread(struct kgdb_state *ks) +{ + char *ptr = &remcom_in_buffer[1]; + struct task_struct *thread; + + kgdb_hex2long(&ptr, &ks->threadid); + thread = getthread(ks->linux_regs, ks->threadid); + if (thread) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, -EINVAL); +} + +/* Handle the 'z' or 'Z' breakpoint remove or set packets */ +static void gdb_cmd_break(struct kgdb_state *ks) +{ + /* + * Since GDB-5.3, it's been drafted that '0' is a software + * breakpoint, '1' is a hardware breakpoint, so let's do that. + */ + char *bpt_type = &remcom_in_buffer[1]; + char *ptr = &remcom_in_buffer[2]; + unsigned long addr; + unsigned long length; + int error = 0; + + if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { + /* Unsupported */ + if (*bpt_type > '4') + return; + } else { + if (*bpt_type != '0' && *bpt_type != '1') + /* Unsupported. */ + return; + } + + /* + * Test if this is a hardware breakpoint, and + * if we support it: + */ + if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) + /* Unsupported. */ + return; + + if (*(ptr++) != ',') { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (!kgdb_hex2long(&ptr, &addr)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + if (*(ptr++) != ',' || + !kgdb_hex2long(&ptr, &length)) { + error_packet(remcom_out_buffer, -EINVAL); + return; + } + + if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') + error = dbg_set_sw_break(addr); + else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') + error = dbg_remove_sw_break(addr); + else if (remcom_in_buffer[0] == 'Z') + error = arch_kgdb_ops.set_hw_breakpoint(addr, + (int)length, *bpt_type - '0'); + else if (remcom_in_buffer[0] == 'z') + error = arch_kgdb_ops.remove_hw_breakpoint(addr, + (int) length, *bpt_type - '0'); + + if (error == 0) + strcpy(remcom_out_buffer, "OK"); + else + error_packet(remcom_out_buffer, error); +} + +/* Handle the 'C' signal / exception passing packets */ +static int gdb_cmd_exception_pass(struct kgdb_state *ks) +{ + /* C09 == pass exception + * C15 == detach kgdb, pass exception + */ + if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'c'; + + } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { + + ks->pass_exception = 1; + remcom_in_buffer[0] = 'D'; + dbg_remove_all_break(); + kgdb_connected = 0; + return 1; + + } else { + gdbstub_msg_write("KGDB only knows signal 9 (pass)" + " and 15 (pass and disconnect)\n" + "Executing a continue without signal passing\n", 0); + remcom_in_buffer[0] = 'c'; + } + + /* Indicate fall through */ + return -1; +} + +/* + * This function performs all gdbserial command procesing + */ +int gdb_serial_stub(struct kgdb_state *ks) +{ + int error = 0; + int tmp; + + /* Initialize comm buffer and globals. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + kgdb_usethread = kgdb_info[ks->cpu].task; + ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); + ks->pass_exception = 0; + + if (kgdb_connected) { + unsigned char thref[BUF_THREAD_ID_SIZE]; + char *ptr; + + /* Reply to host that an exception has occurred */ + ptr = remcom_out_buffer; + *ptr++ = 'T'; + ptr = hex_byte_pack(ptr, ks->signo); + ptr += strlen(strcpy(ptr, "thread:")); + int_to_threadref(thref, shadow_pid(current->pid)); + ptr = pack_threadid(ptr, thref); + *ptr++ = ';'; + put_packet(remcom_out_buffer); + } + + while (1) { + error = 0; + + /* Clear the out buffer. */ + memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); + + get_packet(remcom_in_buffer); + + switch (remcom_in_buffer[0]) { + case '?': /* gdbserial status */ + gdb_cmd_status(ks); + break; + case 'g': /* return the value of the CPU registers */ + gdb_cmd_getregs(ks); + break; + case 'G': /* set the value of the CPU registers - return OK */ + gdb_cmd_setregs(ks); + break; + case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ + gdb_cmd_memread(ks); + break; + case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_memwrite(ks); + break; +#if DBG_MAX_REG_NUM > 0 + case 'p': /* pXX Return gdb register XX (in hex) */ + gdb_cmd_reg_get(ks); + break; + case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */ + gdb_cmd_reg_set(ks); + break; +#endif /* DBG_MAX_REG_NUM > 0 */ + case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ + gdb_cmd_binwrite(ks); + break; + /* kill or detach. KGDB should treat this like a + * continue. + */ + case 'D': /* Debugger detach */ + case 'k': /* Debugger detach via kill */ + gdb_cmd_detachkill(ks); + goto default_handle; + case 'R': /* Reboot */ + if (gdb_cmd_reboot(ks)) + goto default_handle; + break; + case 'q': /* query command */ + gdb_cmd_query(ks); + break; + case 'H': /* task related */ + gdb_cmd_task(ks); + break; + case 'T': /* Query thread status */ + gdb_cmd_thread(ks); + break; + case 'z': /* Break point remove */ + case 'Z': /* Break point set */ + gdb_cmd_break(ks); + break; +#ifdef CONFIG_KGDB_KDB + case '3': /* Escape into back into kdb */ + if (remcom_in_buffer[1] == '\0') { + gdb_cmd_detachkill(ks); + return DBG_PASS_EVENT; + } +#endif + case 'C': /* Exception passing */ + tmp = gdb_cmd_exception_pass(ks); + if (tmp > 0) + goto default_handle; + if (tmp == 0) + break; + /* Fall through on tmp < 0 */ + case 'c': /* Continue packet */ + case 's': /* Single step packet */ + if (kgdb_contthread && kgdb_contthread != current) { + /* Can't switch threads in kgdb */ + error_packet(remcom_out_buffer, -EINVAL); + break; + } + dbg_activate_sw_breakpoints(); + /* Fall through to default processing */ + default: +default_handle: + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + /* + * Leave cmd processing on error, detach, + * kill, continue, or single step. + */ + if (error >= 0 || remcom_in_buffer[0] == 'D' || + remcom_in_buffer[0] == 'k') { + error = 0; + goto kgdb_exit; + } + + } + + /* reply to the request */ + put_packet(remcom_out_buffer); + } + +kgdb_exit: + if (ks->pass_exception) + error = 1; + return error; +} + +int gdbstub_state(struct kgdb_state *ks, char *cmd) +{ + int error; + + switch (cmd[0]) { + case 'e': + error = kgdb_arch_handle_exception(ks->ex_vector, + ks->signo, + ks->err_code, + remcom_in_buffer, + remcom_out_buffer, + ks->linux_regs); + return error; + case 's': + case 'c': + strcpy(remcom_in_buffer, cmd); + return 0; + case '$': + strcpy(remcom_in_buffer, cmd); + gdbstub_use_prev_in_buf = strlen(remcom_in_buffer); + gdbstub_prev_in_buf_pos = 0; + return 0; + } + dbg_io_ops->write_char('+'); + put_packet(remcom_out_buffer); + return 0; +} + +/** + * gdbstub_exit - Send an exit message to GDB + * @status: The exit code to report. + */ +void gdbstub_exit(int status) +{ + unsigned char checksum, ch, buffer[3]; + int loop; + + if (!kgdb_connected) + return; + kgdb_connected = 0; + + if (!dbg_io_ops || dbg_kdb_mode) + return; + + buffer[0] = 'W'; + buffer[1] = hex_asc_hi(status); + buffer[2] = hex_asc_lo(status); + + dbg_io_ops->write_char('$'); + checksum = 0; + + for (loop = 0; loop < 3; loop++) { + ch = buffer[loop]; + checksum += ch; + dbg_io_ops->write_char(ch); + } + + dbg_io_ops->write_char('#'); + dbg_io_ops->write_char(hex_asc_hi(checksum)); + dbg_io_ops->write_char(hex_asc_lo(checksum)); + + /* make sure the output is flushed, lest the bootloader clobber it */ + if (dbg_io_ops->flush) + dbg_io_ops->flush(); +} |