summaryrefslogtreecommitdiffstats
path: root/kernel/power/suspend_test.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/power/suspend_test.c')
-rw-r--r--kernel/power/suspend_test.c220
1 files changed, 220 insertions, 0 deletions
diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c
new file mode 100644
index 000000000..3f6345d60
--- /dev/null
+++ b/kernel/power/suspend_test.c
@@ -0,0 +1,220 @@
+/*
+ * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
+ *
+ * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/rtc.h>
+
+#include "power.h"
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending. Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS 10
+
+static unsigned long suspend_test_start_time;
+static u32 test_repeat_count_max = 1;
+static u32 test_repeat_count_current;
+
+void suspend_test_start(void)
+{
+ /* FIXME Use better timebase than "jiffies", ideally a clocksource.
+ * What we want is a hardware counter that will work correctly even
+ * during the irqs-are-off stages of the suspend/resume cycle...
+ */
+ suspend_test_start_time = jiffies;
+}
+
+void suspend_test_finish(const char *label)
+{
+ long nj = jiffies - suspend_test_start_time;
+ unsigned msec;
+
+ msec = jiffies_to_msecs(abs(nj));
+ pr_info("PM: %s took %d.%03d seconds\n", label,
+ msec / 1000, msec % 1000);
+
+ /* Warning on suspend means the RTC alarm period needs to be
+ * larger -- the system was sooo slooowwww to suspend that the
+ * alarm (should have) fired before the system went to sleep!
+ *
+ * Warning on either suspend or resume also means the system
+ * has some performance issues. The stack dump of a WARN_ON
+ * is more likely to get the right attention than a printk...
+ */
+ WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
+ "Component: %s, time: %u\n", label, msec);
+}
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system. RTCs wake alarms are a common self-contained mechanism.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+ static char err_readtime[] __initdata =
+ KERN_ERR "PM: can't read %s time, err %d\n";
+ static char err_wakealarm [] __initdata =
+ KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+ static char err_suspend[] __initdata =
+ KERN_ERR "PM: suspend test failed, error %d\n";
+ static char info_test[] __initdata =
+ KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+ unsigned long now;
+ struct rtc_wkalrm alm;
+ int status;
+
+ /* this may fail if the RTC hasn't been initialized */
+repeat:
+ status = rtc_read_time(rtc, &alm.time);
+ if (status < 0) {
+ printk(err_readtime, dev_name(&rtc->dev), status);
+ return;
+ }
+ rtc_tm_to_time(&alm.time, &now);
+
+ memset(&alm, 0, sizeof alm);
+ rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+ alm.enabled = true;
+
+ status = rtc_set_alarm(rtc, &alm);
+ if (status < 0) {
+ printk(err_wakealarm, dev_name(&rtc->dev), status);
+ return;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ if (status == -ENODEV)
+ state = PM_SUSPEND_STANDBY;
+ }
+ if (state == PM_SUSPEND_STANDBY) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ if (status < 0)
+ state = PM_SUSPEND_TO_IDLE;
+ }
+ if (state == PM_SUSPEND_TO_IDLE) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ }
+
+ if (status < 0)
+ printk(err_suspend, status);
+
+ test_repeat_count_current++;
+ if (test_repeat_count_current < test_repeat_count_max)
+ goto repeat;
+
+ /* Some platforms can't detect that the alarm triggered the
+ * wakeup, or (accordingly) disable it after it afterwards.
+ * It's supposed to give oneshot behavior; cope.
+ */
+ alm.enabled = false;
+ rtc_set_alarm(rtc, &alm);
+}
+
+static int __init has_wakealarm(struct device *dev, const void *data)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
+ * at startup time. They're normally disabled, for faster boot and because
+ * we can't know which states really work on this particular system.
+ */
+static const char *test_state_label __initdata;
+
+static char warn_bad_state[] __initdata =
+ KERN_WARNING "PM: can't test '%s' suspend state\n";
+
+static int __init setup_test_suspend(char *value)
+{
+ int i;
+ char *repeat;
+ char *suspend_type;
+
+ /* example : "=mem[,N]" ==> "mem[,N]" */
+ value++;
+ suspend_type = strsep(&value, ",");
+ if (!suspend_type)
+ return 1;
+
+ repeat = strsep(&value, ",");
+ if (repeat) {
+ if (kstrtou32(repeat, 0, &test_repeat_count_max))
+ return 1;
+ }
+
+ for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++)
+ if (!strcmp(pm_labels[i], suspend_type)) {
+ test_state_label = pm_labels[i];
+ return 1;
+ }
+
+ printk(warn_bad_state, suspend_type);
+ return 1;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+ static char warn_no_rtc[] __initdata =
+ KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+ struct rtc_device *rtc = NULL;
+ struct device *dev;
+ suspend_state_t test_state;
+
+ /* PM is initialized by now; is that state testable? */
+ if (!test_state_label)
+ return 0;
+
+ for (test_state = PM_SUSPEND_MIN; test_state < PM_SUSPEND_MAX; test_state++) {
+ const char *state_label = pm_states[test_state];
+
+ if (state_label && !strcmp(test_state_label, state_label))
+ break;
+ }
+ if (test_state == PM_SUSPEND_MAX) {
+ printk(warn_bad_state, test_state_label);
+ return 0;
+ }
+
+ /* RTCs have initialized by now too ... can we use one? */
+ dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm);
+ if (dev) {
+ rtc = rtc_class_open(dev_name(dev));
+ put_device(dev);
+ }
+ if (!rtc) {
+ printk(warn_no_rtc);
+ return 0;
+ }
+
+ /* go for it */
+ test_wakealarm(rtc, test_state);
+ rtc_class_close(rtc);
+ return 0;
+}
+late_initcall(test_suspend);