diff options
Diffstat (limited to 'kernel/trace/trace_benchmark.c')
| -rw-r--r-- | kernel/trace/trace_benchmark.c | 229 |
1 files changed, 229 insertions, 0 deletions
diff --git a/kernel/trace/trace_benchmark.c b/kernel/trace/trace_benchmark.c new file mode 100644 index 000000000..80e0b2aca --- /dev/null +++ b/kernel/trace/trace_benchmark.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/kthread.h> +#include <linux/trace_clock.h> + +#define CREATE_TRACE_POINTS +#include "trace_benchmark.h" + +static struct task_struct *bm_event_thread; + +static char bm_str[BENCHMARK_EVENT_STRLEN] = "START"; + +static u64 bm_total; +static u64 bm_totalsq; +static u64 bm_last; +static u64 bm_max; +static u64 bm_min; +static u64 bm_first; +static u64 bm_cnt; +static u64 bm_stddev; +static unsigned int bm_avg; +static unsigned int bm_std; + +static bool ok_to_run; + +/* + * This gets called in a loop recording the time it took to write + * the tracepoint. What it writes is the time statistics of the last + * tracepoint write. As there is nothing to write the first time + * it simply writes "START". As the first write is cold cache and + * the rest is hot, we save off that time in bm_first and it is + * reported as "first", which is shown in the second write to the + * tracepoint. The "first" field is writen within the statics from + * then on but never changes. + */ +static void trace_do_benchmark(void) +{ + u64 start; + u64 stop; + u64 delta; + u64 stddev; + u64 seed; + u64 last_seed; + unsigned int avg; + unsigned int std = 0; + + /* Only run if the tracepoint is actually active */ + if (!trace_benchmark_event_enabled() || !tracing_is_on()) + return; + + local_irq_disable(); + start = trace_clock_local(); + trace_benchmark_event(bm_str); + stop = trace_clock_local(); + local_irq_enable(); + + bm_cnt++; + + delta = stop - start; + + /* + * The first read is cold cached, keep it separate from the + * other calculations. + */ + if (bm_cnt == 1) { + bm_first = delta; + scnprintf(bm_str, BENCHMARK_EVENT_STRLEN, + "first=%llu [COLD CACHED]", bm_first); + return; + } + + bm_last = delta; + + if (delta > bm_max) + bm_max = delta; + if (!bm_min || delta < bm_min) + bm_min = delta; + + /* + * When bm_cnt is greater than UINT_MAX, it breaks the statistics + * accounting. Freeze the statistics when that happens. + * We should have enough data for the avg and stddev anyway. + */ + if (bm_cnt > UINT_MAX) { + scnprintf(bm_str, BENCHMARK_EVENT_STRLEN, + "last=%llu first=%llu max=%llu min=%llu ** avg=%u std=%d std^2=%lld", + bm_last, bm_first, bm_max, bm_min, bm_avg, bm_std, bm_stddev); + return; + } + + bm_total += delta; + bm_totalsq += delta * delta; + + + if (bm_cnt > 1) { + /* + * Apply Welford's method to calculate standard deviation: + * s^2 = 1 / (n * (n-1)) * (n * \Sum (x_i)^2 - (\Sum x_i)^2) + */ + stddev = (u64)bm_cnt * bm_totalsq - bm_total * bm_total; + do_div(stddev, (u32)bm_cnt); + do_div(stddev, (u32)bm_cnt - 1); + } else + stddev = 0; + + delta = bm_total; + do_div(delta, bm_cnt); + avg = delta; + + if (stddev > 0) { + int i = 0; + /* + * stddev is the square of standard deviation but + * we want the actualy number. Use the average + * as our seed to find the std. + * + * The next try is: + * x = (x + N/x) / 2 + * + * Where N is the squared number to find the square + * root of. + */ + seed = avg; + do { + last_seed = seed; + seed = stddev; + if (!last_seed) + break; + do_div(seed, last_seed); + seed += last_seed; + do_div(seed, 2); + } while (i++ < 10 && last_seed != seed); + + std = seed; + } + + scnprintf(bm_str, BENCHMARK_EVENT_STRLEN, + "last=%llu first=%llu max=%llu min=%llu avg=%u std=%d std^2=%lld", + bm_last, bm_first, bm_max, bm_min, avg, std, stddev); + + bm_std = std; + bm_avg = avg; + bm_stddev = stddev; +} + +static int benchmark_event_kthread(void *arg) +{ + /* sleep a bit to make sure the tracepoint gets activated */ + msleep(100); + + while (!kthread_should_stop()) { + + trace_do_benchmark(); + + /* + * We don't go to sleep, but let others run as well. + * This is bascially a "yield()" to let any task that + * wants to run, schedule in, but if the CPU is idle, + * we'll keep burning cycles. + * + * Note the tasks_rcu_qs() version of cond_resched() will + * notify synchronize_rcu_tasks() that this thread has + * passed a quiescent state for rcu_tasks. Otherwise + * this thread will never voluntarily schedule which would + * block synchronize_rcu_tasks() indefinitely. + */ + cond_resched_tasks_rcu_qs(); + } + + return 0; +} + +/* + * When the benchmark tracepoint is enabled, it calls this + * function and the thread that calls the tracepoint is created. + */ +int trace_benchmark_reg(void) +{ + if (!ok_to_run) { + pr_warning("trace benchmark cannot be started via kernel command line\n"); + return -EBUSY; + } + + bm_event_thread = kthread_run(benchmark_event_kthread, + NULL, "event_benchmark"); + if (IS_ERR(bm_event_thread)) { + pr_warning("trace benchmark failed to create kernel thread\n"); + return PTR_ERR(bm_event_thread); + } + + return 0; +} + +/* + * When the benchmark tracepoint is disabled, it calls this + * function and the thread that calls the tracepoint is deleted + * and all the numbers are reset. + */ +void trace_benchmark_unreg(void) +{ + if (!bm_event_thread) + return; + + kthread_stop(bm_event_thread); + bm_event_thread = NULL; + + strcpy(bm_str, "START"); + bm_total = 0; + bm_totalsq = 0; + bm_last = 0; + bm_max = 0; + bm_min = 0; + bm_cnt = 0; + /* These don't need to be reset but reset them anyway */ + bm_first = 0; + bm_std = 0; + bm_avg = 0; + bm_stddev = 0; +} + +static __init int ok_to_run_trace_benchmark(void) +{ + ok_to_run = true; + + return 0; +} + +early_initcall(ok_to_run_trace_benchmark); |