diff options
Diffstat (limited to 'sound/aoa/soundbus/i2sbus/interface.h')
| -rw-r--r-- | sound/aoa/soundbus/i2sbus/interface.h | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/sound/aoa/soundbus/i2sbus/interface.h b/sound/aoa/soundbus/i2sbus/interface.h new file mode 100644 index 000000000..c6b5f5452 --- /dev/null +++ b/sound/aoa/soundbus/i2sbus/interface.h @@ -0,0 +1,187 @@ +/* + * i2sbus driver -- interface register definitions + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * GPL v2, can be found in COPYING. + */ +#ifndef __I2SBUS_INTERFACE_H +#define __I2SBUS_INTERFACE_H + +/* i2s bus control registers, at least what we know about them */ + +#define __PAD(m,n) u8 __pad##m[n] +#define _PAD(line, n) __PAD(line, n) +#define PAD(n) _PAD(__LINE__, (n)) +struct i2s_interface_regs { + __le32 intr_ctl; /* 0x00 */ + PAD(12); + __le32 serial_format; /* 0x10 */ + PAD(12); + __le32 codec_msg_out; /* 0x20 */ + PAD(12); + __le32 codec_msg_in; /* 0x30 */ + PAD(12); + __le32 frame_count; /* 0x40 */ + PAD(12); + __le32 frame_match; /* 0x50 */ + PAD(12); + __le32 data_word_sizes; /* 0x60 */ + PAD(12); + __le32 peak_level_sel; /* 0x70 */ + PAD(12); + __le32 peak_level_in0; /* 0x80 */ + PAD(12); + __le32 peak_level_in1; /* 0x90 */ + PAD(12); + /* total size: 0x100 bytes */ +} __attribute__((__packed__)); + +/* interrupt register is just a bitfield with + * interrupt enable and pending bits */ +#define I2S_REG_INTR_CTL 0x00 +# define I2S_INT_FRAME_COUNT (1<<31) +# define I2S_PENDING_FRAME_COUNT (1<<30) +# define I2S_INT_MESSAGE_FLAG (1<<29) +# define I2S_PENDING_MESSAGE_FLAG (1<<28) +# define I2S_INT_NEW_PEAK (1<<27) +# define I2S_PENDING_NEW_PEAK (1<<26) +# define I2S_INT_CLOCKS_STOPPED (1<<25) +# define I2S_PENDING_CLOCKS_STOPPED (1<<24) +# define I2S_INT_EXTERNAL_SYNC_ERROR (1<<23) +# define I2S_PENDING_EXTERNAL_SYNC_ERROR (1<<22) +# define I2S_INT_EXTERNAL_SYNC_OK (1<<21) +# define I2S_PENDING_EXTERNAL_SYNC_OK (1<<20) +# define I2S_INT_NEW_SAMPLE_RATE (1<<19) +# define I2S_PENDING_NEW_SAMPLE_RATE (1<<18) +# define I2S_INT_STATUS_FLAG (1<<17) +# define I2S_PENDING_STATUS_FLAG (1<<16) + +/* serial format register is more interesting :) + * It contains: + * - clock source + * - MClk divisor + * - SClk divisor + * - SClk master flag + * - serial format (sony, i2s 64x, i2s 32x, dav, silabs) + * - external sample frequency interrupt (don't understand) + * - external sample frequency + */ +#define I2S_REG_SERIAL_FORMAT 0x10 +/* clock source. You get either 18.432, 45.1584 or 49.1520 MHz */ +# define I2S_SF_CLOCK_SOURCE_SHIFT 30 +# define I2S_SF_CLOCK_SOURCE_MASK (3<<I2S_SF_CLOCK_SOURCE_SHIFT) +# define I2S_SF_CLOCK_SOURCE_18MHz (0<<I2S_SF_CLOCK_SOURCE_SHIFT) +# define I2S_SF_CLOCK_SOURCE_45MHz (1<<I2S_SF_CLOCK_SOURCE_SHIFT) +# define I2S_SF_CLOCK_SOURCE_49MHz (2<<I2S_SF_CLOCK_SOURCE_SHIFT) +/* also, let's define the exact clock speeds here, in Hz */ +#define I2S_CLOCK_SPEED_18MHz 18432000 +#define I2S_CLOCK_SPEED_45MHz 45158400 +#define I2S_CLOCK_SPEED_49MHz 49152000 +/* MClk is the clock that drives the codec, usually called its 'system clock'. + * It is derived by taking only every 'divisor' tick of the clock. + */ +# define I2S_SF_MCLKDIV_SHIFT 24 +# define I2S_SF_MCLKDIV_MASK (0x1F<<I2S_SF_MCLKDIV_SHIFT) +# define I2S_SF_MCLKDIV_1 (0x14<<I2S_SF_MCLKDIV_SHIFT) +# define I2S_SF_MCLKDIV_3 (0x13<<I2S_SF_MCLKDIV_SHIFT) +# define I2S_SF_MCLKDIV_5 (0x12<<I2S_SF_MCLKDIV_SHIFT) +# define I2S_SF_MCLKDIV_14 (0x0E<<I2S_SF_MCLKDIV_SHIFT) +# define I2S_SF_MCLKDIV_OTHER(div) (((div/2-1)<<I2S_SF_MCLKDIV_SHIFT)&I2S_SF_MCLKDIV_MASK) +static inline int i2s_sf_mclkdiv(int div, int *out) +{ + int d; + + switch(div) { + case 1: *out |= I2S_SF_MCLKDIV_1; return 0; + case 3: *out |= I2S_SF_MCLKDIV_3; return 0; + case 5: *out |= I2S_SF_MCLKDIV_5; return 0; + case 14: *out |= I2S_SF_MCLKDIV_14; return 0; + default: + if (div%2) return -1; + d = div/2-1; + if (d == 0x14 || d == 0x13 || d == 0x12 || d == 0x0E) + return -1; + *out |= I2S_SF_MCLKDIV_OTHER(div); + return 0; + } +} +/* SClk is the clock that drives the i2s wire bus. Note that it is + * derived from the MClk above by taking only every 'divisor' tick + * of MClk. + */ +# define I2S_SF_SCLKDIV_SHIFT 20 +# define I2S_SF_SCLKDIV_MASK (0xF<<I2S_SF_SCLKDIV_SHIFT) +# define I2S_SF_SCLKDIV_1 (8<<I2S_SF_SCLKDIV_SHIFT) +# define I2S_SF_SCLKDIV_3 (9<<I2S_SF_SCLKDIV_SHIFT) +# define I2S_SF_SCLKDIV_OTHER(div) (((div/2-1)<<I2S_SF_SCLKDIV_SHIFT)&I2S_SF_SCLKDIV_MASK) +static inline int i2s_sf_sclkdiv(int div, int *out) +{ + int d; + + switch(div) { + case 1: *out |= I2S_SF_SCLKDIV_1; return 0; + case 3: *out |= I2S_SF_SCLKDIV_3; return 0; + default: + if (div%2) return -1; + d = div/2-1; + if (d == 8 || d == 9) return -1; + *out |= I2S_SF_SCLKDIV_OTHER(div); + return 0; + } +} +# define I2S_SF_SCLK_MASTER (1<<19) +/* serial format is the way the data is put to the i2s wire bus */ +# define I2S_SF_SERIAL_FORMAT_SHIFT 16 +# define I2S_SF_SERIAL_FORMAT_MASK (7<<I2S_SF_SERIAL_FORMAT_SHIFT) +# define I2S_SF_SERIAL_FORMAT_SONY (0<<I2S_SF_SERIAL_FORMAT_SHIFT) +# define I2S_SF_SERIAL_FORMAT_I2S_64X (1<<I2S_SF_SERIAL_FORMAT_SHIFT) +# define I2S_SF_SERIAL_FORMAT_I2S_32X (2<<I2S_SF_SERIAL_FORMAT_SHIFT) +# define I2S_SF_SERIAL_FORMAT_I2S_DAV (4<<I2S_SF_SERIAL_FORMAT_SHIFT) +# define I2S_SF_SERIAL_FORMAT_I2S_SILABS (5<<I2S_SF_SERIAL_FORMAT_SHIFT) +/* unknown */ +# define I2S_SF_EXT_SAMPLE_FREQ_INT_SHIFT 12 +# define I2S_SF_EXT_SAMPLE_FREQ_INT_MASK (0xF<<I2S_SF_SAMPLE_FREQ_INT_SHIFT) +/* probably gives external frequency? */ +# define I2S_SF_EXT_SAMPLE_FREQ_MASK 0xFFF + +/* used to send codec messages, but how isn't clear */ +#define I2S_REG_CODEC_MSG_OUT 0x20 + +/* used to receive codec messages, but how isn't clear */ +#define I2S_REG_CODEC_MSG_IN 0x30 + +/* frame count reg isn't clear to me yet, but probably useful */ +#define I2S_REG_FRAME_COUNT 0x40 + +/* program to some value, and get interrupt if frame count reaches it */ +#define I2S_REG_FRAME_MATCH 0x50 + +/* this register describes how the bus transfers data */ +#define I2S_REG_DATA_WORD_SIZES 0x60 +/* number of interleaved input channels */ +# define I2S_DWS_NUM_CHANNELS_IN_SHIFT 24 +# define I2S_DWS_NUM_CHANNELS_IN_MASK (0x1F<<I2S_DWS_NUM_CHANNELS_IN_SHIFT) +/* word size of input data */ +# define I2S_DWS_DATA_IN_SIZE_SHIFT 16 +# define I2S_DWS_DATA_IN_16BIT (0<<I2S_DWS_DATA_IN_SIZE_SHIFT) +# define I2S_DWS_DATA_IN_24BIT (3<<I2S_DWS_DATA_IN_SIZE_SHIFT) +/* number of interleaved output channels */ +# define I2S_DWS_NUM_CHANNELS_OUT_SHIFT 8 +# define I2S_DWS_NUM_CHANNELS_OUT_MASK (0x1F<<I2S_DWS_NUM_CHANNELS_OUT_SHIFT) +/* word size of output data */ +# define I2S_DWS_DATA_OUT_SIZE_SHIFT 0 +# define I2S_DWS_DATA_OUT_16BIT (0<<I2S_DWS_DATA_OUT_SIZE_SHIFT) +# define I2S_DWS_DATA_OUT_24BIT (3<<I2S_DWS_DATA_OUT_SIZE_SHIFT) + + +/* unknown */ +#define I2S_REG_PEAK_LEVEL_SEL 0x70 + +/* unknown */ +#define I2S_REG_PEAK_LEVEL_IN0 0x80 + +/* unknown */ +#define I2S_REG_PEAK_LEVEL_IN1 0x90 + +#endif /* __I2SBUS_INTERFACE_H */ |