summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm9081.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm9081.c')
-rw-r--r--sound/soc/codecs/wm9081.c1388
1 files changed, 1388 insertions, 0 deletions
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
new file mode 100644
index 000000000..399255d1f
--- /dev/null
+++ b/sound/soc/codecs/wm9081.c
@@ -0,0 +1,1388 @@
+/*
+ * wm9081.c -- WM9081 ALSA SoC Audio driver
+ *
+ * Author: Mark Brown
+ *
+ * Copyright 2009-12 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/wm9081.h>
+#include "wm9081.h"
+
+static const struct reg_default wm9081_reg[] = {
+ { 2, 0x00B9 }, /* R2 - Analogue Lineout */
+ { 3, 0x00B9 }, /* R3 - Analogue Speaker PGA */
+ { 4, 0x0001 }, /* R4 - VMID Control */
+ { 5, 0x0068 }, /* R5 - Bias Control 1 */
+ { 7, 0x0000 }, /* R7 - Analogue Mixer */
+ { 8, 0x0000 }, /* R8 - Anti Pop Control */
+ { 9, 0x01DB }, /* R9 - Analogue Speaker 1 */
+ { 10, 0x0018 }, /* R10 - Analogue Speaker 2 */
+ { 11, 0x0180 }, /* R11 - Power Management */
+ { 12, 0x0000 }, /* R12 - Clock Control 1 */
+ { 13, 0x0038 }, /* R13 - Clock Control 2 */
+ { 14, 0x4000 }, /* R14 - Clock Control 3 */
+ { 16, 0x0000 }, /* R16 - FLL Control 1 */
+ { 17, 0x0200 }, /* R17 - FLL Control 2 */
+ { 18, 0x0000 }, /* R18 - FLL Control 3 */
+ { 19, 0x0204 }, /* R19 - FLL Control 4 */
+ { 20, 0x0000 }, /* R20 - FLL Control 5 */
+ { 22, 0x0000 }, /* R22 - Audio Interface 1 */
+ { 23, 0x0002 }, /* R23 - Audio Interface 2 */
+ { 24, 0x0008 }, /* R24 - Audio Interface 3 */
+ { 25, 0x0022 }, /* R25 - Audio Interface 4 */
+ { 27, 0x0006 }, /* R27 - Interrupt Status Mask */
+ { 28, 0x0000 }, /* R28 - Interrupt Polarity */
+ { 29, 0x0000 }, /* R29 - Interrupt Control */
+ { 30, 0x00C0 }, /* R30 - DAC Digital 1 */
+ { 31, 0x0008 }, /* R31 - DAC Digital 2 */
+ { 32, 0x09AF }, /* R32 - DRC 1 */
+ { 33, 0x4201 }, /* R33 - DRC 2 */
+ { 34, 0x0000 }, /* R34 - DRC 3 */
+ { 35, 0x0000 }, /* R35 - DRC 4 */
+ { 38, 0x0000 }, /* R38 - Write Sequencer 1 */
+ { 39, 0x0000 }, /* R39 - Write Sequencer 2 */
+ { 40, 0x0002 }, /* R40 - MW Slave 1 */
+ { 42, 0x0000 }, /* R42 - EQ 1 */
+ { 43, 0x0000 }, /* R43 - EQ 2 */
+ { 44, 0x0FCA }, /* R44 - EQ 3 */
+ { 45, 0x0400 }, /* R45 - EQ 4 */
+ { 46, 0x00B8 }, /* R46 - EQ 5 */
+ { 47, 0x1EB5 }, /* R47 - EQ 6 */
+ { 48, 0xF145 }, /* R48 - EQ 7 */
+ { 49, 0x0B75 }, /* R49 - EQ 8 */
+ { 50, 0x01C5 }, /* R50 - EQ 9 */
+ { 51, 0x169E }, /* R51 - EQ 10 */
+ { 52, 0xF829 }, /* R52 - EQ 11 */
+ { 53, 0x07AD }, /* R53 - EQ 12 */
+ { 54, 0x1103 }, /* R54 - EQ 13 */
+ { 55, 0x1C58 }, /* R55 - EQ 14 */
+ { 56, 0xF373 }, /* R56 - EQ 15 */
+ { 57, 0x0A54 }, /* R57 - EQ 16 */
+ { 58, 0x0558 }, /* R58 - EQ 17 */
+ { 59, 0x0564 }, /* R59 - EQ 18 */
+ { 60, 0x0559 }, /* R60 - EQ 19 */
+ { 61, 0x4000 }, /* R61 - EQ 20 */
+};
+
+static struct {
+ int ratio;
+ int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 2 },
+ { 16000, 3 },
+ { 22050, 4 },
+ { 24000, 5 },
+ { 32000, 6 },
+ { 44100, 7 },
+ { 48000, 8 },
+ { 88200, 9 },
+ { 96000, 10 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 50, 5 },
+ { 55, 6 },
+ { 60, 7 },
+ { 80, 8 },
+ { 100, 9 },
+ { 110, 10 },
+ { 120, 11 },
+ { 160, 12 },
+ { 200, 13 },
+ { 220, 14 },
+ { 240, 15 },
+ { 250, 16 },
+ { 300, 17 },
+ { 320, 18 },
+ { 440, 19 },
+ { 480, 20 },
+};
+
+struct wm9081_priv {
+ struct regmap *regmap;
+ int sysclk_source;
+ int mclk_rate;
+ int sysclk_rate;
+ int fs;
+ int bclk;
+ int master;
+ int fll_fref;
+ int fll_fout;
+ int tdm_width;
+ struct wm9081_pdata pdata;
+};
+
+static bool wm9081_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM9081_SOFTWARE_RESET:
+ case WM9081_INTERRUPT_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool wm9081_readable_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case WM9081_SOFTWARE_RESET:
+ case WM9081_ANALOGUE_LINEOUT:
+ case WM9081_ANALOGUE_SPEAKER_PGA:
+ case WM9081_VMID_CONTROL:
+ case WM9081_BIAS_CONTROL_1:
+ case WM9081_ANALOGUE_MIXER:
+ case WM9081_ANTI_POP_CONTROL:
+ case WM9081_ANALOGUE_SPEAKER_1:
+ case WM9081_ANALOGUE_SPEAKER_2:
+ case WM9081_POWER_MANAGEMENT:
+ case WM9081_CLOCK_CONTROL_1:
+ case WM9081_CLOCK_CONTROL_2:
+ case WM9081_CLOCK_CONTROL_3:
+ case WM9081_FLL_CONTROL_1:
+ case WM9081_FLL_CONTROL_2:
+ case WM9081_FLL_CONTROL_3:
+ case WM9081_FLL_CONTROL_4:
+ case WM9081_FLL_CONTROL_5:
+ case WM9081_AUDIO_INTERFACE_1:
+ case WM9081_AUDIO_INTERFACE_2:
+ case WM9081_AUDIO_INTERFACE_3:
+ case WM9081_AUDIO_INTERFACE_4:
+ case WM9081_INTERRUPT_STATUS:
+ case WM9081_INTERRUPT_STATUS_MASK:
+ case WM9081_INTERRUPT_POLARITY:
+ case WM9081_INTERRUPT_CONTROL:
+ case WM9081_DAC_DIGITAL_1:
+ case WM9081_DAC_DIGITAL_2:
+ case WM9081_DRC_1:
+ case WM9081_DRC_2:
+ case WM9081_DRC_3:
+ case WM9081_DRC_4:
+ case WM9081_WRITE_SEQUENCER_1:
+ case WM9081_WRITE_SEQUENCER_2:
+ case WM9081_MW_SLAVE_1:
+ case WM9081_EQ_1:
+ case WM9081_EQ_2:
+ case WM9081_EQ_3:
+ case WM9081_EQ_4:
+ case WM9081_EQ_5:
+ case WM9081_EQ_6:
+ case WM9081_EQ_7:
+ case WM9081_EQ_8:
+ case WM9081_EQ_9:
+ case WM9081_EQ_10:
+ case WM9081_EQ_11:
+ case WM9081_EQ_12:
+ case WM9081_EQ_13:
+ case WM9081_EQ_14:
+ case WM9081_EQ_15:
+ case WM9081_EQ_16:
+ case WM9081_EQ_17:
+ case WM9081_EQ_18:
+ case WM9081_EQ_19:
+ case WM9081_EQ_20:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int wm9081_reset(struct regmap *map)
+{
+ return regmap_write(map, WM9081_SOFTWARE_RESET, 0x9081);
+}
+
+static const DECLARE_TLV_DB_SCALE(drc_in_tlv, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_out_tlv, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static const DECLARE_TLV_DB_RANGE(drc_max_tlv,
+ 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
+ 1, 1, TLV_DB_SCALE_ITEM(1800, 0, 0),
+ 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0)
+);
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -300, 50, 0);
+
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const char *drc_high_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "1/16",
+ "0",
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_high, WM9081_DRC_3, 3, drc_high_text);
+
+static const char *drc_low_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "0",
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_low, WM9081_DRC_3, 0, drc_low_text);
+
+static const char *drc_atk_text[] = {
+ "181us",
+ "181us",
+ "363us",
+ "726us",
+ "1.45ms",
+ "2.9ms",
+ "5.8ms",
+ "11.6ms",
+ "23.2ms",
+ "46.4ms",
+ "92.8ms",
+ "185.6ms",
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_atk, WM9081_DRC_2, 12, drc_atk_text);
+
+static const char *drc_dcy_text[] = {
+ "186ms",
+ "372ms",
+ "743ms",
+ "1.49s",
+ "2.97s",
+ "5.94s",
+ "11.89s",
+ "23.78s",
+ "47.56s",
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_dcy, WM9081_DRC_2, 8, drc_dcy_text);
+
+static const char *drc_qr_dcy_text[] = {
+ "0.725ms",
+ "1.45ms",
+ "5.8ms",
+};
+
+static SOC_ENUM_SINGLE_DECL(drc_qr_dcy, WM9081_DRC_2, 4, drc_qr_dcy_text);
+
+static const char *dac_deemph_text[] = {
+ "None",
+ "32kHz",
+ "44.1kHz",
+ "48kHz",
+};
+
+static SOC_ENUM_SINGLE_DECL(dac_deemph, WM9081_DAC_DIGITAL_2, 1,
+ dac_deemph_text);
+
+static const char *speaker_mode_text[] = {
+ "Class D",
+ "Class AB",
+};
+
+static SOC_ENUM_SINGLE_DECL(speaker_mode, WM9081_ANALOGUE_SPEAKER_2, 6,
+ speaker_mode_text);
+
+static int speaker_mode_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ unsigned int reg;
+
+ reg = snd_soc_component_read32(component, WM9081_ANALOGUE_SPEAKER_2);
+ if (reg & WM9081_SPK_MODE)
+ ucontrol->value.enumerated.item[0] = 1;
+ else
+ ucontrol->value.enumerated.item[0] = 0;
+
+ return 0;
+}
+
+/*
+ * Stop any attempts to change speaker mode while the speaker is enabled.
+ *
+ * We also have some special anti-pop controls dependent on speaker
+ * mode which must be changed along with the mode.
+ */
+static int speaker_mode_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ unsigned int reg_pwr = snd_soc_component_read32(component, WM9081_POWER_MANAGEMENT);
+ unsigned int reg2 = snd_soc_component_read32(component, WM9081_ANALOGUE_SPEAKER_2);
+
+ /* Are we changing anything? */
+ if (ucontrol->value.enumerated.item[0] ==
+ ((reg2 & WM9081_SPK_MODE) != 0))
+ return 0;
+
+ /* Don't try to change modes while enabled */
+ if (reg_pwr & WM9081_SPK_ENA)
+ return -EINVAL;
+
+ if (ucontrol->value.enumerated.item[0]) {
+ /* Class AB */
+ reg2 &= ~(WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL);
+ reg2 |= WM9081_SPK_MODE;
+ } else {
+ /* Class D */
+ reg2 |= WM9081_SPK_INV_MUTE | WM9081_OUT_SPK_CTRL;
+ reg2 &= ~WM9081_SPK_MODE;
+ }
+
+ snd_soc_component_write(component, WM9081_ANALOGUE_SPEAKER_2, reg2);
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new wm9081_snd_controls[] = {
+SOC_SINGLE_TLV("IN1 Volume", WM9081_ANALOGUE_MIXER, 1, 1, 1, in_tlv),
+SOC_SINGLE_TLV("IN2 Volume", WM9081_ANALOGUE_MIXER, 3, 1, 1, in_tlv),
+
+SOC_SINGLE_TLV("Playback Volume", WM9081_DAC_DIGITAL_1, 1, 96, 0, dac_tlv),
+
+SOC_SINGLE("LINEOUT Switch", WM9081_ANALOGUE_LINEOUT, 7, 1, 1),
+SOC_SINGLE("LINEOUT ZC Switch", WM9081_ANALOGUE_LINEOUT, 6, 1, 0),
+SOC_SINGLE_TLV("LINEOUT Volume", WM9081_ANALOGUE_LINEOUT, 0, 63, 0, out_tlv),
+
+SOC_SINGLE("DRC Switch", WM9081_DRC_1, 15, 1, 0),
+SOC_ENUM("DRC High Slope", drc_high),
+SOC_ENUM("DRC Low Slope", drc_low),
+SOC_SINGLE_TLV("DRC Input Volume", WM9081_DRC_4, 5, 60, 1, drc_in_tlv),
+SOC_SINGLE_TLV("DRC Output Volume", WM9081_DRC_4, 0, 30, 1, drc_out_tlv),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM9081_DRC_2, 2, 3, 1, drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM9081_DRC_2, 0, 3, 0, drc_max_tlv),
+SOC_ENUM("DRC Attack", drc_atk),
+SOC_ENUM("DRC Decay", drc_dcy),
+SOC_SINGLE("DRC Quick Release Switch", WM9081_DRC_1, 2, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM9081_DRC_2, 6, 3, 0, drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Decay", drc_qr_dcy),
+SOC_SINGLE_TLV("DRC Startup Volume", WM9081_DRC_1, 6, 18, 0, drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM9081_EQ_1, 0, 1, 0),
+
+SOC_SINGLE("Speaker DC Volume", WM9081_ANALOGUE_SPEAKER_1, 3, 5, 0),
+SOC_SINGLE("Speaker AC Volume", WM9081_ANALOGUE_SPEAKER_1, 0, 5, 0),
+SOC_SINGLE("Speaker Switch", WM9081_ANALOGUE_SPEAKER_PGA, 7, 1, 1),
+SOC_SINGLE("Speaker ZC Switch", WM9081_ANALOGUE_SPEAKER_PGA, 6, 1, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM9081_ANALOGUE_SPEAKER_PGA, 0, 63, 0,
+ out_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+SOC_ENUM_EXT("Speaker Mode", speaker_mode, speaker_mode_get, speaker_mode_put),
+};
+
+static const struct snd_kcontrol_new wm9081_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM9081_EQ_1, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM9081_EQ_1, 6, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM9081_EQ_1, 1, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM9081_EQ_2, 11, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM9081_EQ_2, 6, 24, 0, eq_tlv),
+};
+
+static const struct snd_kcontrol_new mixer[] = {
+SOC_DAPM_SINGLE("IN1 Switch", WM9081_ANALOGUE_MIXER, 0, 1, 0),
+SOC_DAPM_SINGLE("IN2 Switch", WM9081_ANALOGUE_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM9081_ANALOGUE_MIXER, 4, 1, 0),
+};
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+ fll_div->fll_clk_ref_div = div / 2;
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 0;
+ target = Fout * 2;
+ while (target < 90000000) {
+ div++;
+ target *= 2;
+ if (div > 7) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ fll_div->fll_outdiv = div;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropriate FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm9081_set_fll(struct snd_soc_component *component, int fll_id,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+ u16 reg1, reg4, reg5;
+ struct _fll_div fll_div;
+ int ret;
+ int clk_sys_reg;
+
+ /* Any change? */
+ if (Fref == wm9081->fll_fref && Fout == wm9081->fll_fout)
+ return 0;
+
+ /* Disable the FLL */
+ if (Fout == 0) {
+ dev_dbg(component->dev, "FLL disabled\n");
+ wm9081->fll_fref = 0;
+ wm9081->fll_fout = 0;
+
+ return 0;
+ }
+
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+
+ reg5 = snd_soc_component_read32(component, WM9081_FLL_CONTROL_5);
+ reg5 &= ~WM9081_FLL_CLK_SRC_MASK;
+
+ switch (fll_id) {
+ case WM9081_SYSCLK_FLL_MCLK:
+ reg5 |= 0x1;
+ break;
+
+ default:
+ dev_err(component->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Disable CLK_SYS while we reconfigure */
+ clk_sys_reg = snd_soc_component_read32(component, WM9081_CLOCK_CONTROL_3);
+ if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+ snd_soc_component_write(component, WM9081_CLOCK_CONTROL_3,
+ clk_sys_reg & ~WM9081_CLK_SYS_ENA);
+
+ /* Any FLL configuration change requires that the FLL be
+ * disabled first. */
+ reg1 = snd_soc_component_read32(component, WM9081_FLL_CONTROL_1);
+ reg1 &= ~WM9081_FLL_ENA;
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_1, reg1);
+
+ /* Apply the configuration */
+ if (fll_div.k)
+ reg1 |= WM9081_FLL_FRAC_MASK;
+ else
+ reg1 &= ~WM9081_FLL_FRAC_MASK;
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_1, reg1);
+
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM9081_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM9081_FLL_FRATIO_SHIFT));
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_3, fll_div.k);
+
+ reg4 = snd_soc_component_read32(component, WM9081_FLL_CONTROL_4);
+ reg4 &= ~WM9081_FLL_N_MASK;
+ reg4 |= fll_div.n << WM9081_FLL_N_SHIFT;
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_4, reg4);
+
+ reg5 &= ~WM9081_FLL_CLK_REF_DIV_MASK;
+ reg5 |= fll_div.fll_clk_ref_div << WM9081_FLL_CLK_REF_DIV_SHIFT;
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_5, reg5);
+
+ /* Set gain to the recommended value */
+ snd_soc_component_update_bits(component, WM9081_FLL_CONTROL_4,
+ WM9081_FLL_GAIN_MASK, 0);
+
+ /* Enable the FLL */
+ snd_soc_component_write(component, WM9081_FLL_CONTROL_1, reg1 | WM9081_FLL_ENA);
+
+ /* Then bring CLK_SYS up again if it was disabled */
+ if (clk_sys_reg & WM9081_CLK_SYS_ENA)
+ snd_soc_component_write(component, WM9081_CLOCK_CONTROL_3, clk_sys_reg);
+
+ dev_dbg(component->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+ wm9081->fll_fref = Fref;
+ wm9081->fll_fout = Fout;
+
+ return 0;
+}
+
+static int configure_clock(struct snd_soc_component *component)
+{
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+ int new_sysclk, i, target;
+ unsigned int reg;
+ int ret = 0;
+ int mclkdiv = 0;
+ int fll = 0;
+
+ switch (wm9081->sysclk_source) {
+ case WM9081_SYSCLK_MCLK:
+ if (wm9081->mclk_rate > 12225000) {
+ mclkdiv = 1;
+ wm9081->sysclk_rate = wm9081->mclk_rate / 2;
+ } else {
+ wm9081->sysclk_rate = wm9081->mclk_rate;
+ }
+ wm9081_set_fll(component, WM9081_SYSCLK_FLL_MCLK, 0, 0);
+ break;
+
+ case WM9081_SYSCLK_FLL_MCLK:
+ /* If we have a sample rate calculate a CLK_SYS that
+ * gives us a suitable DAC configuration, plus BCLK.
+ * Ideally we would check to see if we can clock
+ * directly from MCLK and only use the FLL if this is
+ * not the case, though care must be taken with free
+ * running mode.
+ */
+ if (wm9081->master && wm9081->bclk) {
+ /* Make sure we can generate CLK_SYS and BCLK
+ * and that we've got 3MHz for optimal
+ * performance. */
+ for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ target = wm9081->fs * clk_sys_rates[i].ratio;
+ new_sysclk = target;
+ if (target >= wm9081->bclk &&
+ target > 3000000)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
+ } else if (wm9081->fs) {
+ for (i = 0; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ new_sysclk = clk_sys_rates[i].ratio
+ * wm9081->fs;
+ if (new_sysclk > 3000000)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(clk_sys_rates))
+ return -EINVAL;
+
+ } else {
+ new_sysclk = 12288000;
+ }
+
+ ret = wm9081_set_fll(component, WM9081_SYSCLK_FLL_MCLK,
+ wm9081->mclk_rate, new_sysclk);
+ if (ret == 0) {
+ wm9081->sysclk_rate = new_sysclk;
+
+ /* Switch SYSCLK over to FLL */
+ fll = 1;
+ } else {
+ wm9081->sysclk_rate = wm9081->mclk_rate;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ reg = snd_soc_component_read32(component, WM9081_CLOCK_CONTROL_1);
+ if (mclkdiv)
+ reg |= WM9081_MCLKDIV2;
+ else
+ reg &= ~WM9081_MCLKDIV2;
+ snd_soc_component_write(component, WM9081_CLOCK_CONTROL_1, reg);
+
+ reg = snd_soc_component_read32(component, WM9081_CLOCK_CONTROL_3);
+ if (fll)
+ reg |= WM9081_CLK_SRC_SEL;
+ else
+ reg &= ~WM9081_CLK_SRC_SEL;
+ snd_soc_component_write(component, WM9081_CLOCK_CONTROL_3, reg);
+
+ dev_dbg(component->dev, "CLK_SYS is %dHz\n", wm9081->sysclk_rate);
+
+ return ret;
+}
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+
+ /* This should be done on init() for bypass paths */
+ switch (wm9081->sysclk_source) {
+ case WM9081_SYSCLK_MCLK:
+ dev_dbg(component->dev, "Using %dHz MCLK\n", wm9081->mclk_rate);
+ break;
+ case WM9081_SYSCLK_FLL_MCLK:
+ dev_dbg(component->dev, "Using %dHz MCLK with FLL\n",
+ wm9081->mclk_rate);
+ break;
+ default:
+ dev_err(component->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ configure_clock(component);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ /* Disable the FLL if it's running */
+ wm9081_set_fll(component, 0, 0, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget wm9081_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1"),
+SND_SOC_DAPM_INPUT("IN2"),
+
+SND_SOC_DAPM_DAC("DAC", NULL, WM9081_POWER_MANAGEMENT, 0, 0),
+
+SND_SOC_DAPM_MIXER_NAMED_CTL("Mixer", SND_SOC_NOPM, 0, 0,
+ mixer, ARRAY_SIZE(mixer)),
+
+SND_SOC_DAPM_PGA("LINEOUT PGA", WM9081_POWER_MANAGEMENT, 4, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA("Speaker PGA", WM9081_POWER_MANAGEMENT, 2, 0, NULL, 0),
+SND_SOC_DAPM_OUT_DRV("Speaker", WM9081_POWER_MANAGEMENT, 1, 0, NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("LINEOUT"),
+SND_SOC_DAPM_OUTPUT("SPKN"),
+SND_SOC_DAPM_OUTPUT("SPKP"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM9081_CLOCK_CONTROL_3, 0, 0, clk_sys_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM9081_CLOCK_CONTROL_3, 1, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM9081_CLOCK_CONTROL_3, 2, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("TSENSE", WM9081_POWER_MANAGEMENT, 7, 0, NULL, 0),
+};
+
+
+static const struct snd_soc_dapm_route wm9081_audio_paths[] = {
+ { "DAC", NULL, "CLK_SYS" },
+ { "DAC", NULL, "CLK_DSP" },
+ { "DAC", NULL, "AIF" },
+
+ { "Mixer", "IN1 Switch", "IN1" },
+ { "Mixer", "IN2 Switch", "IN2" },
+ { "Mixer", "Playback Switch", "DAC" },
+
+ { "LINEOUT PGA", NULL, "Mixer" },
+ { "LINEOUT PGA", NULL, "TOCLK" },
+ { "LINEOUT PGA", NULL, "CLK_SYS" },
+
+ { "LINEOUT", NULL, "LINEOUT PGA" },
+
+ { "Speaker PGA", NULL, "Mixer" },
+ { "Speaker PGA", NULL, "TOCLK" },
+ { "Speaker PGA", NULL, "CLK_SYS" },
+
+ { "Speaker", NULL, "Speaker PGA" },
+ { "Speaker", NULL, "TSENSE" },
+
+ { "SPKN", NULL, "Speaker" },
+ { "SPKP", NULL, "Speaker" },
+};
+
+static int wm9081_set_bias_level(struct snd_soc_component *component,
+ enum snd_soc_bias_level level)
+{
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID=2*40k */
+ snd_soc_component_update_bits(component, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x2);
+
+ /* Normal bias current */
+ snd_soc_component_update_bits(component, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA, 0);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ /* Initial cold start */
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+ regcache_cache_only(wm9081->regmap, false);
+ regcache_sync(wm9081->regmap);
+
+ /* Disable LINEOUT discharge */
+ snd_soc_component_update_bits(component, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH, 0);
+
+ /* Select startup bias source */
+ snd_soc_component_update_bits(component, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA);
+
+ /* VMID 2*4k; Soft VMID ramp enable */
+ snd_soc_component_update_bits(component, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP |
+ WM9081_VMID_SEL_MASK,
+ WM9081_VMID_RAMP | 0x6);
+
+ mdelay(100);
+
+ /* Normal bias enable & soft start off */
+ snd_soc_component_update_bits(component, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP, 0);
+
+ /* Standard bias source */
+ snd_soc_component_update_bits(component, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC, 0);
+ }
+
+ /* VMID 2*240k */
+ snd_soc_component_update_bits(component, WM9081_VMID_CONTROL,
+ WM9081_VMID_SEL_MASK, 0x04);
+
+ /* Standby bias current on */
+ snd_soc_component_update_bits(component, WM9081_BIAS_CONTROL_1,
+ WM9081_STBY_BIAS_ENA,
+ WM9081_STBY_BIAS_ENA);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Startup bias source and disable bias */
+ snd_soc_component_update_bits(component, WM9081_BIAS_CONTROL_1,
+ WM9081_BIAS_SRC | WM9081_BIAS_ENA,
+ WM9081_BIAS_SRC);
+
+ /* Disable VMID with soft ramping */
+ snd_soc_component_update_bits(component, WM9081_VMID_CONTROL,
+ WM9081_VMID_RAMP | WM9081_VMID_SEL_MASK,
+ WM9081_VMID_RAMP);
+
+ /* Actively discharge LINEOUT */
+ snd_soc_component_update_bits(component, WM9081_ANTI_POP_CONTROL,
+ WM9081_LINEOUT_DISCH,
+ WM9081_LINEOUT_DISCH);
+
+ regcache_cache_only(wm9081->regmap, true);
+ break;
+ }
+
+ return 0;
+}
+
+static int wm9081_set_dai_fmt(struct snd_soc_dai *dai,
+ unsigned int fmt)
+{
+ struct snd_soc_component *component = dai->component;
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+ unsigned int aif2 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_2);
+
+ aif2 &= ~(WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV |
+ WM9081_BCLK_DIR | WM9081_LRCLK_DIR | WM9081_AIF_FMT_MASK);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ wm9081->master = 0;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif2 |= WM9081_LRCLK_DIR;
+ wm9081->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif2 |= WM9081_BCLK_DIR;
+ wm9081->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif2 |= WM9081_LRCLK_DIR | WM9081_BCLK_DIR;
+ wm9081->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif2 |= WM9081_AIF_LRCLK_INV;
+ /* fall through */
+ case SND_SOC_DAIFMT_DSP_A:
+ aif2 |= 0x3;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif2 |= 0x2;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif2 |= 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif2 |= WM9081_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif2 |= WM9081_AIF_BCLK_INV | WM9081_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif2 |= WM9081_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif2 |= WM9081_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_component_write(component, WM9081_AUDIO_INTERFACE_2, aif2);
+
+ return 0;
+}
+
+static int wm9081_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+ int ret, i, best, best_val, cur_val;
+ unsigned int clk_ctrl2, aif1, aif2, aif3, aif4;
+
+ clk_ctrl2 = snd_soc_component_read32(component, WM9081_CLOCK_CONTROL_2);
+ clk_ctrl2 &= ~(WM9081_CLK_SYS_RATE_MASK | WM9081_SAMPLE_RATE_MASK);
+
+ aif1 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_1);
+
+ aif2 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_2);
+ aif2 &= ~WM9081_AIF_WL_MASK;
+
+ aif3 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_3);
+ aif3 &= ~WM9081_BCLK_DIV_MASK;
+
+ aif4 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_4);
+ aif4 &= ~WM9081_LRCLK_RATE_MASK;
+
+ wm9081->fs = params_rate(params);
+
+ if (wm9081->tdm_width) {
+ /* If TDM is set up then that fixes our BCLK. */
+ int slots = ((aif1 & WM9081_AIFDAC_TDM_MODE_MASK) >>
+ WM9081_AIFDAC_TDM_MODE_SHIFT) + 1;
+
+ wm9081->bclk = wm9081->fs * wm9081->tdm_width * slots;
+ } else {
+ /* Otherwise work out a BCLK from the sample size */
+ wm9081->bclk = 2 * wm9081->fs;
+
+ switch (params_width(params)) {
+ case 16:
+ wm9081->bclk *= 16;
+ break;
+ case 20:
+ wm9081->bclk *= 20;
+ aif2 |= 0x4;
+ break;
+ case 24:
+ wm9081->bclk *= 24;
+ aif2 |= 0x8;
+ break;
+ case 32:
+ wm9081->bclk *= 32;
+ aif2 |= 0xc;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ dev_dbg(component->dev, "Target BCLK is %dHz\n", wm9081->bclk);
+
+ ret = configure_clock(component);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm9081->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm9081->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm9081->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm9081->fs);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(component->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clk_ctrl2 |= (clk_sys_rates[best].clk_sys_rate
+ << WM9081_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm9081->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm9081->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(component->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clk_ctrl2 |= (sample_rates[best].sample_rate
+ << WM9081_SAMPLE_RATE_SHIFT);
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm9081->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm9081->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm9081->bclk = (wm9081->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(component->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm9081->bclk);
+ aif3 |= bclk_divs[best].bclk_div;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(component->dev, "LRCLK_RATE is %d\n", wm9081->bclk / wm9081->fs);
+ aif4 |= wm9081->bclk / wm9081->fs;
+
+ /* Apply a ReTune Mobile configuration if it's in use */
+ if (wm9081->pdata.num_retune_configs) {
+ struct wm9081_pdata *pdata = &wm9081->pdata;
+ struct wm9081_retune_mobile_setting *s;
+ int eq1;
+
+ best = 0;
+ best_val = abs(pdata->retune_configs[0].rate - wm9081->fs);
+ for (i = 0; i < pdata->num_retune_configs; i++) {
+ cur_val = abs(pdata->retune_configs[i].rate -
+ wm9081->fs);
+ if (cur_val < best_val) {
+ best_val = cur_val;
+ best = i;
+ }
+ }
+ s = &pdata->retune_configs[best];
+
+ dev_dbg(component->dev, "ReTune Mobile %s tuned for %dHz\n",
+ s->name, s->rate);
+
+ /* If the EQ is enabled then disable it while we write out */
+ eq1 = snd_soc_component_read32(component, WM9081_EQ_1) & WM9081_EQ_ENA;
+ if (eq1 & WM9081_EQ_ENA)
+ snd_soc_component_write(component, WM9081_EQ_1, 0);
+
+ /* Write out the other values */
+ for (i = 1; i < ARRAY_SIZE(s->config); i++)
+ snd_soc_component_write(component, WM9081_EQ_1 + i, s->config[i]);
+
+ eq1 |= (s->config[0] & ~WM9081_EQ_ENA);
+ snd_soc_component_write(component, WM9081_EQ_1, eq1);
+ }
+
+ snd_soc_component_write(component, WM9081_CLOCK_CONTROL_2, clk_ctrl2);
+ snd_soc_component_write(component, WM9081_AUDIO_INTERFACE_2, aif2);
+ snd_soc_component_write(component, WM9081_AUDIO_INTERFACE_3, aif3);
+ snd_soc_component_write(component, WM9081_AUDIO_INTERFACE_4, aif4);
+
+ return 0;
+}
+
+static int wm9081_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_component *component = codec_dai->component;
+ unsigned int reg;
+
+ reg = snd_soc_component_read32(component, WM9081_DAC_DIGITAL_2);
+
+ if (mute)
+ reg |= WM9081_DAC_MUTE;
+ else
+ reg &= ~WM9081_DAC_MUTE;
+
+ snd_soc_component_write(component, WM9081_DAC_DIGITAL_2, reg);
+
+ return 0;
+}
+
+static int wm9081_set_sysclk(struct snd_soc_component *component, int clk_id,
+ int source, unsigned int freq, int dir)
+{
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+
+ switch (clk_id) {
+ case WM9081_SYSCLK_MCLK:
+ case WM9081_SYSCLK_FLL_MCLK:
+ wm9081->sysclk_source = clk_id;
+ wm9081->mclk_rate = freq;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm9081_set_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_component *component = dai->component;
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+ unsigned int aif1 = snd_soc_component_read32(component, WM9081_AUDIO_INTERFACE_1);
+
+ aif1 &= ~(WM9081_AIFDAC_TDM_SLOT_MASK | WM9081_AIFDAC_TDM_MODE_MASK);
+
+ if (slots < 0 || slots > 4)
+ return -EINVAL;
+
+ wm9081->tdm_width = slot_width;
+
+ if (slots == 0)
+ slots = 1;
+
+ aif1 |= (slots - 1) << WM9081_AIFDAC_TDM_MODE_SHIFT;
+
+ switch (rx_mask) {
+ case 1:
+ break;
+ case 2:
+ aif1 |= 0x10;
+ break;
+ case 4:
+ aif1 |= 0x20;
+ break;
+ case 8:
+ aif1 |= 0x30;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ snd_soc_component_write(component, WM9081_AUDIO_INTERFACE_1, aif1);
+
+ return 0;
+}
+
+#define WM9081_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM9081_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops wm9081_dai_ops = {
+ .hw_params = wm9081_hw_params,
+ .set_fmt = wm9081_set_dai_fmt,
+ .digital_mute = wm9081_digital_mute,
+ .set_tdm_slot = wm9081_set_tdm_slot,
+};
+
+/* We report two channels because the CODEC processes a stereo signal, even
+ * though it is only capable of handling a mono output.
+ */
+static struct snd_soc_dai_driver wm9081_dai = {
+ .name = "wm9081-hifi",
+ .playback = {
+ .stream_name = "AIF",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM9081_RATES,
+ .formats = WM9081_FORMATS,
+ },
+ .ops = &wm9081_dai_ops,
+};
+
+static int wm9081_probe(struct snd_soc_component *component)
+{
+ struct wm9081_priv *wm9081 = snd_soc_component_get_drvdata(component);
+
+ /* Enable zero cross by default */
+ snd_soc_component_update_bits(component, WM9081_ANALOGUE_LINEOUT,
+ WM9081_LINEOUTZC, WM9081_LINEOUTZC);
+ snd_soc_component_update_bits(component, WM9081_ANALOGUE_SPEAKER_PGA,
+ WM9081_SPKPGAZC, WM9081_SPKPGAZC);
+
+ if (!wm9081->pdata.num_retune_configs) {
+ dev_dbg(component->dev,
+ "No ReTune Mobile data, using normal EQ\n");
+ snd_soc_add_component_controls(component, wm9081_eq_controls,
+ ARRAY_SIZE(wm9081_eq_controls));
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver soc_component_dev_wm9081 = {
+ .probe = wm9081_probe,
+ .set_sysclk = wm9081_set_sysclk,
+ .set_bias_level = wm9081_set_bias_level,
+ .controls = wm9081_snd_controls,
+ .num_controls = ARRAY_SIZE(wm9081_snd_controls),
+ .dapm_widgets = wm9081_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(wm9081_dapm_widgets),
+ .dapm_routes = wm9081_audio_paths,
+ .num_dapm_routes = ARRAY_SIZE(wm9081_audio_paths),
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
+static const struct regmap_config wm9081_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+
+ .max_register = WM9081_MAX_REGISTER,
+ .reg_defaults = wm9081_reg,
+ .num_reg_defaults = ARRAY_SIZE(wm9081_reg),
+ .volatile_reg = wm9081_volatile_register,
+ .readable_reg = wm9081_readable_register,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int wm9081_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm9081_priv *wm9081;
+ unsigned int reg;
+ int ret;
+
+ wm9081 = devm_kzalloc(&i2c->dev, sizeof(struct wm9081_priv),
+ GFP_KERNEL);
+ if (wm9081 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, wm9081);
+
+ wm9081->regmap = devm_regmap_init_i2c(i2c, &wm9081_regmap);
+ if (IS_ERR(wm9081->regmap)) {
+ ret = PTR_ERR(wm9081->regmap);
+ dev_err(&i2c->dev, "regmap_init() failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(wm9081->regmap, WM9081_SOFTWARE_RESET, &reg);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
+ return ret;
+ }
+ if (reg != 0x9081) {
+ dev_err(&i2c->dev, "Device is not a WM9081: ID=0x%x\n", reg);
+ return -EINVAL;
+ }
+
+ ret = wm9081_reset(wm9081->regmap);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to issue reset\n");
+ return ret;
+ }
+
+ if (dev_get_platdata(&i2c->dev))
+ memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev),
+ sizeof(wm9081->pdata));
+
+ reg = 0;
+ if (wm9081->pdata.irq_high)
+ reg |= WM9081_IRQ_POL;
+ if (!wm9081->pdata.irq_cmos)
+ reg |= WM9081_IRQ_OP_CTRL;
+ regmap_update_bits(wm9081->regmap, WM9081_INTERRUPT_CONTROL,
+ WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);
+
+ regcache_cache_only(wm9081->regmap, true);
+
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_component_dev_wm9081, &wm9081_dai, 1);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int wm9081_i2c_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct i2c_device_id wm9081_i2c_id[] = {
+ { "wm9081", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm9081_i2c_id);
+
+static struct i2c_driver wm9081_i2c_driver = {
+ .driver = {
+ .name = "wm9081",
+ },
+ .probe = wm9081_i2c_probe,
+ .remove = wm9081_i2c_remove,
+ .id_table = wm9081_i2c_id,
+};
+
+module_i2c_driver(wm9081_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC WM9081 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 19:16:52 +0000