diff options
Diffstat (limited to '')
| -rw-r--r-- | tools/gpio/.gitignore | 4 | ||||
| -rw-r--r-- | tools/gpio/Build | 4 | ||||
| -rw-r--r-- | tools/gpio/Makefile | 82 | ||||
| -rw-r--r-- | tools/gpio/gpio-event-mon.c | 194 | ||||
| -rw-r--r-- | tools/gpio/gpio-hammer.c | 171 | ||||
| -rw-r--r-- | tools/gpio/gpio-utils.c | 270 | ||||
| -rw-r--r-- | tools/gpio/gpio-utils.h | 43 | ||||
| -rw-r--r-- | tools/gpio/lsgpio.c | 195 |
8 files changed, 963 insertions, 0 deletions
diff --git a/tools/gpio/.gitignore b/tools/gpio/.gitignore new file mode 100644 index 000000000..9e9dd4b68 --- /dev/null +++ b/tools/gpio/.gitignore @@ -0,0 +1,4 @@ +gpio-event-mon +gpio-hammer +lsgpio + diff --git a/tools/gpio/Build b/tools/gpio/Build new file mode 100644 index 000000000..4141f3583 --- /dev/null +++ b/tools/gpio/Build @@ -0,0 +1,4 @@ +gpio-utils-y += gpio-utils.o +lsgpio-y += lsgpio.o gpio-utils.o +gpio-hammer-y += gpio-hammer.o gpio-utils.o +gpio-event-mon-y += gpio-event-mon.o gpio-utils.o diff --git a/tools/gpio/Makefile b/tools/gpio/Makefile new file mode 100644 index 000000000..3dbf7e8b0 --- /dev/null +++ b/tools/gpio/Makefile @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +include ../scripts/Makefile.include + +bindir ?= /usr/bin + +# This will work when gpio is built in tools env. where srctree +# isn't set and when invoked from selftests build, where srctree +# is set to ".". building_out_of_srctree is undefined for in srctree +# builds +ifndef building_out_of_srctree +srctree := $(patsubst %/,%,$(dir $(CURDIR))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +endif + +# Do not use make's built-in rules +# (this improves performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -r + +CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include + +ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon +ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) + +all: $(ALL_PROGRAMS) + +export srctree OUTPUT CC LD CFLAGS +include $(srctree)/tools/build/Makefile.include + +# +# We need the following to be outside of kernel tree +# +$(OUTPUT)include/linux/gpio.h: ../../include/uapi/linux/gpio.h + mkdir -p $(OUTPUT)include/linux 2>&1 || true + ln -sf $(CURDIR)/../../include/uapi/linux/gpio.h $@ + +prepare: $(OUTPUT)include/linux/gpio.h + +GPIO_UTILS_IN := $(OUTPUT)gpio-utils-in.o +$(GPIO_UTILS_IN): prepare FORCE + $(Q)$(MAKE) $(build)=gpio-utils + +# +# lsgpio +# +LSGPIO_IN := $(OUTPUT)lsgpio-in.o +$(LSGPIO_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o + $(Q)$(MAKE) $(build)=lsgpio +$(OUTPUT)lsgpio: $(LSGPIO_IN) + $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ + +# +# gpio-hammer +# +GPIO_HAMMER_IN := $(OUTPUT)gpio-hammer-in.o +$(GPIO_HAMMER_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o + $(Q)$(MAKE) $(build)=gpio-hammer +$(OUTPUT)gpio-hammer: $(GPIO_HAMMER_IN) + $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ + +# +# gpio-event-mon +# +GPIO_EVENT_MON_IN := $(OUTPUT)gpio-event-mon-in.o +$(GPIO_EVENT_MON_IN): prepare FORCE $(OUTPUT)gpio-utils-in.o + $(Q)$(MAKE) $(build)=gpio-event-mon +$(OUTPUT)gpio-event-mon: $(GPIO_EVENT_MON_IN) + $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ + +clean: + rm -f $(ALL_PROGRAMS) + rm -f $(OUTPUT)include/linux/gpio.h + find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + +install: $(ALL_PROGRAMS) + install -d -m 755 $(DESTDIR)$(bindir); \ + for program in $(ALL_PROGRAMS); do \ + install $$program $(DESTDIR)$(bindir); \ + done + +FORCE: + +.PHONY: all install clean FORCE prepare diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c new file mode 100644 index 000000000..c864544ef --- /dev/null +++ b/tools/gpio/gpio-event-mon.c @@ -0,0 +1,194 @@ +/* + * gpio-event-mon - monitor GPIO line events from userspace + * + * Copyright (C) 2016 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Usage: + * gpio-event-mon -n <device-name> -o <offset> + */ + +#include <unistd.h> +#include <stdlib.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <dirent.h> +#include <errno.h> +#include <string.h> +#include <poll.h> +#include <fcntl.h> +#include <getopt.h> +#include <inttypes.h> +#include <sys/ioctl.h> +#include <sys/types.h> +#include <linux/gpio.h> + +int monitor_device(const char *device_name, + unsigned int line, + uint32_t handleflags, + uint32_t eventflags, + unsigned int loops) +{ + struct gpioevent_request req; + struct gpiohandle_data data; + char *chrdev_name; + int fd; + int ret; + int i = 0; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s\n", chrdev_name); + goto exit_close_error; + } + + req.lineoffset = line; + req.handleflags = handleflags; + req.eventflags = eventflags; + strcpy(req.consumer_label, "gpio-event-mon"); + + ret = ioctl(fd, GPIO_GET_LINEEVENT_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue GET EVENT " + "IOCTL (%d)\n", + ret); + goto exit_close_error; + } + + /* Read initial states */ + ret = ioctl(req.fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, &data); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue GPIOHANDLE GET LINE " + "VALUES IOCTL (%d)\n", + ret); + goto exit_close_error; + } + + fprintf(stdout, "Monitoring line %d on %s\n", line, device_name); + fprintf(stdout, "Initial line value: %d\n", data.values[0]); + + while (1) { + struct gpioevent_data event; + + ret = read(req.fd, &event, sizeof(event)); + if (ret == -1) { + if (errno == -EAGAIN) { + fprintf(stderr, "nothing available\n"); + continue; + } else { + ret = -errno; + fprintf(stderr, "Failed to read event (%d)\n", + ret); + break; + } + } + + if (ret != sizeof(event)) { + fprintf(stderr, "Reading event failed\n"); + ret = -EIO; + break; + } + fprintf(stdout, "GPIO EVENT %llu: ", event.timestamp); + switch (event.id) { + case GPIOEVENT_EVENT_RISING_EDGE: + fprintf(stdout, "rising edge"); + break; + case GPIOEVENT_EVENT_FALLING_EDGE: + fprintf(stdout, "falling edge"); + break; + default: + fprintf(stdout, "unknown event"); + } + fprintf(stdout, "\n"); + + i++; + if (i == loops) + break; + } + +exit_close_error: + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); + free(chrdev_name); + return ret; +} + +void print_usage(void) +{ + fprintf(stderr, "Usage: gpio-event-mon [options]...\n" + "Listen to events on GPIO lines, 0->1 1->0\n" + " -n <name> Listen on GPIOs on a named device (must be stated)\n" + " -o <n> Offset to monitor\n" + " -d Set line as open drain\n" + " -s Set line as open source\n" + " -r Listen for rising edges\n" + " -f Listen for falling edges\n" + " [-c <n>] Do <n> loops (optional, infinite loop if not stated)\n" + " -? This helptext\n" + "\n" + "Example:\n" + "gpio-event-mon -n gpiochip0 -o 4 -r -f\n" + ); +} + +int main(int argc, char **argv) +{ + const char *device_name = NULL; + unsigned int line = -1; + unsigned int loops = 0; + uint32_t handleflags = GPIOHANDLE_REQUEST_INPUT; + uint32_t eventflags = 0; + int c; + + while ((c = getopt(argc, argv, "c:n:o:dsrf?")) != -1) { + switch (c) { + case 'c': + loops = strtoul(optarg, NULL, 10); + break; + case 'n': + device_name = optarg; + break; + case 'o': + line = strtoul(optarg, NULL, 10); + break; + case 'd': + handleflags |= GPIOHANDLE_REQUEST_OPEN_DRAIN; + break; + case 's': + handleflags |= GPIOHANDLE_REQUEST_OPEN_SOURCE; + break; + case 'r': + eventflags |= GPIOEVENT_REQUEST_RISING_EDGE; + break; + case 'f': + eventflags |= GPIOEVENT_REQUEST_FALLING_EDGE; + break; + case '?': + print_usage(); + return -1; + } + } + + if (!device_name || line == -1) { + print_usage(); + return -1; + } + if (!eventflags) { + printf("No flags specified, listening on both rising and " + "falling edges\n"); + eventflags = GPIOEVENT_REQUEST_BOTH_EDGES; + } + return monitor_device(device_name, line, handleflags, + eventflags, loops); +} diff --git a/tools/gpio/gpio-hammer.c b/tools/gpio/gpio-hammer.c new file mode 100644 index 000000000..3da5462a0 --- /dev/null +++ b/tools/gpio/gpio-hammer.c @@ -0,0 +1,171 @@ +/* + * gpio-hammer - example swiss army knife to shake GPIO lines on a system + * + * Copyright (C) 2016 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Usage: + * gpio-hammer -n <device-name> -o <offset1> -o <offset2> + */ + +#include <unistd.h> +#include <stdlib.h> +#include <stdbool.h> +#include <stdio.h> +#include <dirent.h> +#include <errno.h> +#include <string.h> +#include <poll.h> +#include <fcntl.h> +#include <getopt.h> +#include <sys/ioctl.h> +#include <linux/gpio.h> +#include "gpio-utils.h" + +int hammer_device(const char *device_name, unsigned int *lines, int nlines, + unsigned int loops) +{ + struct gpiohandle_data data; + char swirr[] = "-\\|/"; + int fd; + int ret; + int i, j; + unsigned int iteration = 0; + + memset(&data.values, 0, sizeof(data.values)); + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_OUTPUT, &data, + "gpio-hammer"); + if (ret < 0) + goto exit_error; + else + fd = ret; + + ret = gpiotools_get_values(fd, &data); + if (ret < 0) + goto exit_close_error; + + fprintf(stdout, "Hammer lines ["); + for (i = 0; i < nlines; i++) { + fprintf(stdout, "%d", lines[i]); + if (i != (nlines - 1)) + fprintf(stdout, ", "); + } + fprintf(stdout, "] on %s, initial states: [", device_name); + for (i = 0; i < nlines; i++) { + fprintf(stdout, "%d", data.values[i]); + if (i != (nlines - 1)) + fprintf(stdout, ", "); + } + fprintf(stdout, "]\n"); + + /* Hammertime! */ + j = 0; + while (1) { + /* Invert all lines so we blink */ + for (i = 0; i < nlines; i++) + data.values[i] = !data.values[i]; + + ret = gpiotools_set_values(fd, &data); + if (ret < 0) + goto exit_close_error; + + /* Re-read values to get status */ + ret = gpiotools_get_values(fd, &data); + if (ret < 0) + goto exit_close_error; + + fprintf(stdout, "[%c] ", swirr[j]); + j++; + if (j == sizeof(swirr)-1) + j = 0; + + fprintf(stdout, "["); + for (i = 0; i < nlines; i++) { + fprintf(stdout, "%d: %d", lines[i], data.values[i]); + if (i != (nlines - 1)) + fprintf(stdout, ", "); + } + fprintf(stdout, "]\r"); + fflush(stdout); + sleep(1); + iteration++; + if (loops && iteration == loops) + break; + } + fprintf(stdout, "\n"); + ret = 0; + +exit_close_error: + gpiotools_release_linehandle(fd); +exit_error: + return ret; +} + +void print_usage(void) +{ + fprintf(stderr, "Usage: gpio-hammer [options]...\n" + "Hammer GPIO lines, 0->1->0->1...\n" + " -n <name> Hammer GPIOs on a named device (must be stated)\n" + " -o <n> Offset[s] to hammer, at least one, several can be stated\n" + " [-c <n>] Do <n> loops (optional, infinite loop if not stated)\n" + " -? This helptext\n" + "\n" + "Example:\n" + "gpio-hammer -n gpiochip0 -o 4\n" + ); +} + +int main(int argc, char **argv) +{ + const char *device_name = NULL; + unsigned int lines[GPIOHANDLES_MAX]; + unsigned int loops = 0; + int nlines; + int c; + int i; + + i = 0; + while ((c = getopt(argc, argv, "c:n:o:?")) != -1) { + switch (c) { + case 'c': + loops = strtoul(optarg, NULL, 10); + break; + case 'n': + device_name = optarg; + break; + case 'o': + /* + * Avoid overflow. Do not immediately error, we want to + * be able to accurately report on the amount of times + * '-o' was given to give an accurate error message + */ + if (i < GPIOHANDLES_MAX) + lines[i] = strtoul(optarg, NULL, 10); + + i++; + break; + case '?': + print_usage(); + return -1; + } + } + + if (i >= GPIOHANDLES_MAX) { + fprintf(stderr, + "Only %d occurences of '-o' are allowed, %d were found\n", + GPIOHANDLES_MAX, i + 1); + return -1; + } + + nlines = i; + + if (!device_name || !nlines) { + print_usage(); + return -1; + } + return hammer_device(device_name, lines, nlines, loops); +} diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c new file mode 100644 index 000000000..cf7e2f341 --- /dev/null +++ b/tools/gpio/gpio-utils.c @@ -0,0 +1,270 @@ +/* + * GPIO tools - helpers library for the GPIO tools + * + * Copyright (C) 2015 Linus Walleij + * Copyright (C) 2016 Bamvor Jian Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <fcntl.h> +#include <getopt.h> +#include <sys/ioctl.h> +#include <linux/gpio.h> +#include "gpio-utils.h" + +#define COMSUMER "gpio-utils" + +/** + * doc: Operation of gpio + * + * Provide the api of gpiochip for chardev interface. There are two + * types of api. The first one provide as same function as each + * ioctl, including request and release for lines of gpio, read/write + * the value of gpio. If the user want to do lots of read and write of + * lines of gpio, user should use this type of api. + * + * The second one provide the easy to use api for user. Each of the + * following api will request gpio lines, do the operation and then + * release these lines. + */ +/** + * gpiotools_request_linehandle() - request gpio lines in a gpiochip + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @flag: The new flag for requsted gpio. Reference + * "linux/gpio.h" for the meaning of flag. + * @data: Default value will be set to gpio when flag is + * GPIOHANDLE_REQUEST_OUTPUT. + * @consumer_label: The name of consumer, such as "sysfs", + * "powerkey". This is useful for other users to + * know who is using. + * + * Request gpio lines through the ioctl provided by chardev. User + * could call gpiotools_set_values() and gpiotools_get_values() to + * read and write respectively through the returned fd. Call + * gpiotools_release_linehandle() to release these lines after that. + * + * Return: On success return the fd; + * On failure return the errno. + */ +int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, + unsigned int nlines, unsigned int flag, + struct gpiohandle_data *data, + const char *consumer_label) +{ + struct gpiohandle_request req; + char *chrdev_name; + int fd; + int i; + int ret; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s, %s\n", + chrdev_name, strerror(errno)); + goto exit_close_error; + } + + for (i = 0; i < nlines; i++) + req.lineoffsets[i] = lines[i]; + + req.flags = flag; + strcpy(req.consumer_label, consumer_label); + req.lines = nlines; + if (flag & GPIOHANDLE_REQUEST_OUTPUT) + memcpy(req.default_values, data, sizeof(req.default_values)); + + ret = ioctl(fd, GPIO_GET_LINEHANDLE_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIO_GET_LINEHANDLE_IOCTL", ret, strerror(errno)); + } + +exit_close_error: + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); + free(chrdev_name); + return ret < 0 ? ret : req.fd; +} +/** + * gpiotools_set_values(): Set the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * @data: The array of values want to set. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set_values(const int fd, struct gpiohandle_data *data) +{ + int ret; + + ret = ioctl(fd, GPIOHANDLE_SET_LINE_VALUES_IOCTL, data); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIOHANDLE_SET_LINE_VALUES_IOCTL", ret, + strerror(errno)); + } + + return ret; +} + +/** + * gpiotools_get_values(): Get the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * @data: The array of values get from hardware. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get_values(const int fd, struct gpiohandle_data *data) +{ + int ret; + + ret = ioctl(fd, GPIOHANDLE_GET_LINE_VALUES_IOCTL, data); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIOHANDLE_GET_LINE_VALUES_IOCTL", ret, + strerror(errno)); + } + + return ret; +} + +/** + * gpiotools_release_linehandle(): Release the line(s) of gpiochip + * @fd: The fd returned by + * gpiotools_request_linehandle(). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_release_linehandle(const int fd) +{ + int ret; + + ret = close(fd); + if (ret == -1) { + perror("Failed to close GPIO LINEHANDLE device file"); + ret = -errno; + } + + return ret; +} + +/** + * gpiotools_get(): Get value from specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get(const char *device_name, unsigned int line) +{ + struct gpiohandle_data data; + unsigned int lines[] = {line}; + + gpiotools_gets(device_name, lines, 1, &data); + return data.values[0]; +} + + +/** + * gpiotools_gets(): Get values from specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @data: The array of values get from gpiochip. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_gets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data) +{ + int fd; + int ret; + int ret_close; + + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_INPUT, data, + COMSUMER); + if (ret < 0) + return ret; + + fd = ret; + ret = gpiotools_get_values(fd, data); + ret_close = gpiotools_release_linehandle(fd); + return ret < 0 ? ret : ret_close; +} + +/** + * gpiotools_set(): Set value to specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * @value: The value of gpio, must be 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set(const char *device_name, unsigned int line, + unsigned int value) +{ + struct gpiohandle_data data; + unsigned int lines[] = {line}; + + data.values[0] = value; + return gpiotools_sets(device_name, lines, 1, &data); +} + +/** + * gpiotools_sets(): Set values to specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @nline: The number of lines to request. + * @data: The array of values set to gpiochip, must be + * 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_sets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data) +{ + int ret; + + ret = gpiotools_request_linehandle(device_name, lines, nlines, + GPIOHANDLE_REQUEST_OUTPUT, data, + COMSUMER); + if (ret < 0) + return ret; + + return gpiotools_release_linehandle(ret); +} diff --git a/tools/gpio/gpio-utils.h b/tools/gpio/gpio-utils.h new file mode 100644 index 000000000..344ea041f --- /dev/null +++ b/tools/gpio/gpio-utils.h @@ -0,0 +1,43 @@ +/* + * GPIO tools - utility helpers library for the GPIO tools + * + * Copyright (C) 2015 Linus Walleij + * + * Portions copied from iio_utils and lssio: + * Copyright (c) 2010 Manuel Stahl <manuel.stahl@iis.fraunhofer.de> + * Copyright (c) 2008 Jonathan Cameron + * * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef _GPIO_UTILS_H_ +#define _GPIO_UTILS_H_ + +#include <string.h> + +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +static inline int check_prefix(const char *str, const char *prefix) +{ + return strlen(str) > strlen(prefix) && + strncmp(str, prefix, strlen(prefix)) == 0; +} + +int gpiotools_request_linehandle(const char *device_name, unsigned int *lines, + unsigned int nlines, unsigned int flag, + struct gpiohandle_data *data, + const char *consumer_label); +int gpiotools_set_values(const int fd, struct gpiohandle_data *data); +int gpiotools_get_values(const int fd, struct gpiohandle_data *data); +int gpiotools_release_linehandle(const int fd); + +int gpiotools_get(const char *device_name, unsigned int line); +int gpiotools_gets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data); +int gpiotools_set(const char *device_name, unsigned int line, + unsigned int value); +int gpiotools_sets(const char *device_name, unsigned int *lines, + unsigned int nlines, struct gpiohandle_data *data); + +#endif /* _GPIO_UTILS_H_ */ diff --git a/tools/gpio/lsgpio.c b/tools/gpio/lsgpio.c new file mode 100644 index 000000000..eb3f56efd --- /dev/null +++ b/tools/gpio/lsgpio.c @@ -0,0 +1,195 @@ +/* + * lsgpio - example on how to list the GPIO lines on a system + * + * Copyright (C) 2015 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * Usage: + * lsgpio <-n device-name> + */ + +#include <unistd.h> +#include <stdlib.h> +#include <stdbool.h> +#include <stdio.h> +#include <dirent.h> +#include <errno.h> +#include <string.h> +#include <poll.h> +#include <fcntl.h> +#include <getopt.h> +#include <sys/ioctl.h> +#include <linux/gpio.h> + +#include "gpio-utils.h" + +struct gpio_flag { + char *name; + unsigned long mask; +}; + +struct gpio_flag flagnames[] = { + { + .name = "kernel", + .mask = GPIOLINE_FLAG_KERNEL, + }, + { + .name = "output", + .mask = GPIOLINE_FLAG_IS_OUT, + }, + { + .name = "active-low", + .mask = GPIOLINE_FLAG_ACTIVE_LOW, + }, + { + .name = "open-drain", + .mask = GPIOLINE_FLAG_OPEN_DRAIN, + }, + { + .name = "open-source", + .mask = GPIOLINE_FLAG_OPEN_SOURCE, + }, +}; + +void print_flags(unsigned long flags) +{ + int i; + int printed = 0; + + for (i = 0; i < ARRAY_SIZE(flagnames); i++) { + if (flags & flagnames[i].mask) { + if (printed) + fprintf(stdout, " "); + fprintf(stdout, "%s", flagnames[i].name); + printed++; + } + } +} + +int list_device(const char *device_name) +{ + struct gpiochip_info cinfo; + char *chrdev_name; + int fd; + int ret; + int i; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s\n", chrdev_name); + goto exit_close_error; + } + + /* Inspect this GPIO chip */ + ret = ioctl(fd, GPIO_GET_CHIPINFO_IOCTL, &cinfo); + if (ret == -1) { + ret = -errno; + perror("Failed to issue CHIPINFO IOCTL\n"); + goto exit_close_error; + } + fprintf(stdout, "GPIO chip: %s, \"%s\", %u GPIO lines\n", + cinfo.name, cinfo.label, cinfo.lines); + + /* Loop over the lines and print info */ + for (i = 0; i < cinfo.lines; i++) { + struct gpioline_info linfo; + + memset(&linfo, 0, sizeof(linfo)); + linfo.line_offset = i; + + ret = ioctl(fd, GPIO_GET_LINEINFO_IOCTL, &linfo); + if (ret == -1) { + ret = -errno; + perror("Failed to issue LINEINFO IOCTL\n"); + goto exit_close_error; + } + fprintf(stdout, "\tline %2d:", linfo.line_offset); + if (linfo.name[0]) + fprintf(stdout, " \"%s\"", linfo.name); + else + fprintf(stdout, " unnamed"); + if (linfo.consumer[0]) + fprintf(stdout, " \"%s\"", linfo.consumer); + else + fprintf(stdout, " unused"); + if (linfo.flags) { + fprintf(stdout, " ["); + print_flags(linfo.flags); + fprintf(stdout, "]"); + } + fprintf(stdout, "\n"); + + } + +exit_close_error: + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); + free(chrdev_name); + return ret; +} + +void print_usage(void) +{ + fprintf(stderr, "Usage: lsgpio [options]...\n" + "List GPIO chips, lines and states\n" + " -n <name> List GPIOs on a named device\n" + " -? This helptext\n" + ); +} + +int main(int argc, char **argv) +{ + const char *device_name = NULL; + int ret; + int c; + + while ((c = getopt(argc, argv, "n:")) != -1) { + switch (c) { + case 'n': + device_name = optarg; + break; + case '?': + print_usage(); + return -1; + } + } + + if (device_name) + ret = list_device(device_name); + else { + const struct dirent *ent; + DIR *dp; + + /* List all GPIO devices one at a time */ + dp = opendir("/dev"); + if (!dp) { + ret = -errno; + goto error_out; + } + + ret = -ENOENT; + while (ent = readdir(dp), ent) { + if (check_prefix(ent->d_name, "gpiochip")) { + ret = list_device(ent->d_name); + if (ret) + break; + } + } + + ret = 0; + if (closedir(dp) == -1) { + perror("scanning devices: Failed to close directory"); + ret = -errno; + } + } +error_out: + return ret; +} |