1 files changed, 497 insertions, 0 deletions
diff --git a/tools/perf/Documentation/perf.data-file-format.txt b/tools/perf/Documentation/perf.data-file-format.txt
new file mode 100644
index 000000000..dfb218fea
--- /dev/null
+++ b/tools/perf/Documentation/perf.data-file-format.txt
@@ -0,0 +1,497 @@
+perf.data format
+
+Uptodate as of v4.7
+
+This document describes the on-disk perf.data format, generated by perf record
+or perf inject and consumed by the other perf tools.
+
+On a high level perf.data contains the events generated by the PMUs, plus metadata.
+
+All fields are in native-endian of the machine that generated the perf.data.
+
+When perf is writing to a pipe it uses a special version of the file
+format that does not rely on seeking to adjust data offsets.  This
+format is described in "Pipe-mode data" section. The pipe data version can be
+augmented with additional events using perf inject.
+
+The file starts with a perf_header:
+
+struct perf_header {
+	char magic[8];		/* PERFILE2 */
+	uint64_t size;		/* size of the header */
+	uint64_t attr_size;	/* size of an attribute in attrs */
+	struct perf_file_section attrs;
+	struct perf_file_section data;
+	struct perf_file_section event_types;
+	uint64_t flags;
+	uint64_t flags1[3];
+};
+
+The magic number identifies the perf file and the version. Current perf versions
+use PERFILE2. Old perf versions generated a version 1 format (PERFFILE). Version 1
+is not described here. The magic number also identifies the endian. When the
+magic value is 64bit byte swapped compared the file is in non-native
+endian.
+
+A perf_file_section contains a pointer to another section of the perf file.
+The header contains three such pointers: for attributes, data and event types.
+
+struct perf_file_section {
+	uint64_t offset;	/* offset from start of file */
+	uint64_t size;		/* size of the section */
+};
+
+Flags section:
+
+The header is followed by different optional headers, described by the bits set
+in flags. Only headers for which the bit is set are included. Each header
+consists of a perf_file_section located after the initial header.
+The respective perf_file_section points to the data of the additional
+header and defines its size.
+
+Some headers consist of strings, which are defined like this:
+
+struct perf_header_string {
+       uint32_t len;
+       char string[len]; /* zero terminated */
+};
+
+Some headers consist of a sequence of strings, which start with a
+
+struct perf_header_string_list {
+     uint32_t nr;
+     struct perf_header_string strings[nr]; /* variable length records */
+};
+
+The bits are the flags bits in a 256 bit bitmap starting with
+flags. These define the valid bits:
+
+	HEADER_RESERVED		= 0,	/* always cleared */
+	HEADER_FIRST_FEATURE	= 1,
+	HEADER_TRACING_DATA	= 1,
+
+Describe me.
+
+	HEADER_BUILD_ID = 2,
+
+The header consists of an sequence of build_id_event. The size of each record
+is defined by header.size (see perf_event.h). Each event defines a ELF build id
+for a executable file name for a pid. An ELF build id is a unique identifier
+assigned by the linker to an executable.
+
+struct build_id_event {
+	struct perf_event_header header;
+	pid_t			 pid;
+	uint8_t			 build_id[24];
+	char			 filename[header.size - offsetof(struct build_id_event, filename)];
+};
+
+	HEADER_HOSTNAME = 3,
+
+A perf_header_string with the hostname where the data was collected
+(uname -n)
+
+	HEADER_OSRELEASE = 4,
+
+A perf_header_string with the os release where the data was collected
+(uname -r)
+
+	HEADER_VERSION = 5,
+
+A perf_header_string with the perf user tool version where the
+data was collected. This is the same as the version of the source tree
+the perf tool was built from.
+
+	HEADER_ARCH = 6,
+
+A perf_header_string with the CPU architecture (uname -m)
+
+	HEADER_NRCPUS = 7,
+
+A structure defining the number of CPUs.
+
+struct nr_cpus {
+       uint32_t nr_cpus_available; /* CPUs not yet onlined */
+       uint32_t nr_cpus_online;
+};
+
+	HEADER_CPUDESC = 8,
+
+A perf_header_string with description of the CPU. On x86 this is the model name
+in /proc/cpuinfo
+
+	HEADER_CPUID = 9,
+
+A perf_header_string with the exact CPU type. On x86 this is
+vendor,family,model,stepping. For example: GenuineIntel,6,69,1
+
+	HEADER_TOTAL_MEM = 10,
+
+An uint64_t with the total memory in bytes.
+
+	HEADER_CMDLINE = 11,
+
+A perf_header_string with the perf command line used to collect the data.
+
+	HEADER_EVENT_DESC = 12,
+
+Another description of the perf_event_attrs, more detailed than header.attrs
+including IDs and names. See perf_event.h or the man page for a description
+of a struct perf_event_attr.
+
+struct {
+       uint32_t nr; /* number of events */
+       uint32_t attr_size; /* size of each perf_event_attr */
+       struct {
+	      struct perf_event_attr attr;  /* size of attr_size */
+	      uint32_t nr_ids;
+	      struct perf_header_string event_string;
+	      uint64_t ids[nr_ids];
+       } events[nr]; /* Variable length records */
+};
+
+	HEADER_CPU_TOPOLOGY = 13,
+
+String lists defining the core and CPU threads topology.
+The string lists are followed by a variable length array
+which contains core_id and socket_id of each cpu.
+The number of entries can be determined by the size of the
+section minus the sizes of both string lists.
+
+struct {
+       struct perf_header_string_list cores; /* Variable length */
+       struct perf_header_string_list threads; /* Variable length */
+       struct {
+	      uint32_t core_id;
+	      uint32_t socket_id;
+       } cpus[nr]; /* Variable length records */
+};
+
+Example:
+	sibling cores   : 0-3
+	sibling threads : 0-1
+	sibling threads : 2-3
+
+	HEADER_NUMA_TOPOLOGY = 14,
+
+	A list of NUMA node descriptions
+
+struct {
+       uint32_t nr;
+       struct {
+	      uint32_t nodenr;
+	      uint64_t mem_total;
+	      uint64_t mem_free;
+	      struct perf_header_string cpus;
+       } nodes[nr]; /* Variable length records */
+};
+
+	HEADER_BRANCH_STACK = 15,
+
+Not implemented in perf.
+
+	HEADER_PMU_MAPPINGS = 16,
+
+	A list of PMU structures, defining the different PMUs supported by perf.
+
+struct {
+       uint32_t nr;
+       struct pmu {
+	      uint32_t pmu_type;
+	      struct perf_header_string pmu_name;
+       } [nr]; /* Variable length records */
+};
+
+	HEADER_GROUP_DESC = 17,
+
+	Description of counter groups ({...} in perf syntax)
+
+struct {
+         uint32_t nr;
+         struct {
+		struct perf_header_string string;
+		uint32_t leader_idx;
+		uint32_t nr_members;
+	 } [nr]; /* Variable length records */
+};
+
+	HEADER_AUXTRACE = 18,
+
+Define additional auxtrace areas in the perf.data. auxtrace is used to store
+undecoded hardware tracing information, such as Intel Processor Trace data.
+
+/**
+ * struct auxtrace_index_entry - indexes a AUX area tracing event within a
+ *                               perf.data file.
+ * @file_offset: offset within the perf.data file
+ * @sz: size of the event
+ */
+struct auxtrace_index_entry {
+	u64			file_offset;
+	u64			sz;
+};
+
+#define PERF_AUXTRACE_INDEX_ENTRY_COUNT 256
+
+/**
+ * struct auxtrace_index - index of AUX area tracing events within a perf.data
+ *                         file.
+ * @list: linking a number of arrays of entries
+ * @nr: number of entries
+ * @entries: array of entries
+ */
+struct auxtrace_index {
+	struct list_head	list;
+	size_t			nr;
+	struct auxtrace_index_entry entries[PERF_AUXTRACE_INDEX_ENTRY_COUNT];
+};
+
+	HEADER_STAT = 19,
+
+This is merely a flag signifying that the data section contains data
+recorded from perf stat record.
+
+	HEADER_CACHE = 20,
+
+Description of the cache hierarchy. Based on the Linux sysfs format
+in /sys/devices/system/cpu/cpu*/cache/
+
+	u32 version	Currently always 1
+	u32 number_of_cache_levels
+
+struct {
+	u32	level;
+	u32	line_size;
+	u32	sets;
+	u32	ways;
+	struct perf_header_string type;
+	struct perf_header_string size;
+	struct perf_header_string map;
+}[number_of_cache_levels];
+
+	HEADER_SAMPLE_TIME = 21,
+
+Two uint64_t for the time of first sample and the time of last sample.
+
+	other bits are reserved and should ignored for now
+	HEADER_FEAT_BITS	= 256,
+
+Attributes
+
+This is an array of perf_event_attrs, each attr_size bytes long, which defines
+each event collected. See perf_event.h or the man page for a detailed
+description.
+
+Data
+
+This section is the bulk of the file. It consist of a stream of perf_events
+describing events. This matches the format generated by the kernel.
+See perf_event.h or the manpage for a detailed description.
+
+Some notes on parsing:
+
+Ordering
+
+The events are not necessarily in time stamp order, as they can be
+collected in parallel on different CPUs. If the events should be
+processed in time order they need to be sorted first. It is possible
+to only do a partial sort using the FINISHED_ROUND event header (see
+below). perf record guarantees that there is no reordering over a
+FINISHED_ROUND.
+
+ID vs IDENTIFIER
+
+When the event stream contains multiple events each event is identified
+by an ID. This can be either through the PERF_SAMPLE_ID or the
+PERF_SAMPLE_IDENTIFIER header. The PERF_SAMPLE_IDENTIFIER header is
+at a fixed offset from the event header, which allows reliable
+parsing of the header. Relying on ID may be ambiguous.
+IDENTIFIER is only supported by newer Linux kernels.
+
+Perf record specific events:
+
+In addition to the kernel generated event types perf record adds its
+own event types (in addition it also synthesizes some kernel events,
+for example MMAP events)
+
+	PERF_RECORD_USER_TYPE_START		= 64,
+	PERF_RECORD_HEADER_ATTR			= 64,
+
+struct attr_event {
+	struct perf_event_header header;
+	struct perf_event_attr attr;
+	uint64_t id[];
+};
+
+	PERF_RECORD_HEADER_EVENT_TYPE		= 65, /* deprecated */
+
+#define MAX_EVENT_NAME 64
+
+struct perf_trace_event_type {
+	uint64_t	event_id;
+	char	name[MAX_EVENT_NAME];
+};
+
+struct event_type_event {
+	struct perf_event_header header;
+	struct perf_trace_event_type event_type;
+};
+
+
+	PERF_RECORD_HEADER_TRACING_DATA		= 66,
+
+Describe me
+
+struct tracing_data_event {
+	struct perf_event_header header;
+	uint32_t size;
+};
+
+	PERF_RECORD_HEADER_BUILD_ID		= 67,
+
+Define a ELF build ID for a referenced executable.
+
+       struct build_id_event;   /* See above */
+
+	PERF_RECORD_FINISHED_ROUND		= 68,
+
+No event reordering over this header. No payload.
+
+	PERF_RECORD_ID_INDEX			= 69,
+
+Map event ids to CPUs and TIDs.
+
+struct id_index_entry {
+	uint64_t id;
+	uint64_t idx;
+	uint64_t cpu;
+	uint64_t tid;
+};
+
+struct id_index_event {
+	struct perf_event_header header;
+	uint64_t nr;
+	struct id_index_entry entries[nr];
+};
+
+	PERF_RECORD_AUXTRACE_INFO		= 70,
+
+Auxtrace type specific information. Describe me
+
+struct auxtrace_info_event {
+	struct perf_event_header header;
+	uint32_t type;
+	uint32_t reserved__; /* For alignment */
+	uint64_t priv[];
+};
+
+	PERF_RECORD_AUXTRACE			= 71,
+
+Defines auxtrace data. Followed by the actual data. The contents of
+the auxtrace data is dependent on the event and the CPU. For example
+for Intel Processor Trace it contains Processor Trace data generated
+by the CPU.
+
+struct auxtrace_event {
+	struct perf_event_header header;
+	uint64_t size;
+	uint64_t offset;
+	uint64_t reference;
+	uint32_t idx;
+	uint32_t tid;
+	uint32_t cpu;
+	uint32_t reserved__; /* For alignment */
+};
+
+struct aux_event {
+	struct perf_event_header header;
+	uint64_t	aux_offset;
+	uint64_t	aux_size;
+	uint64_t	flags;
+};
+
+	PERF_RECORD_AUXTRACE_ERROR		= 72,
+
+Describes an error in hardware tracing
+
+enum auxtrace_error_type {
+	PERF_AUXTRACE_ERROR_ITRACE  = 1,
+	PERF_AUXTRACE_ERROR_MAX
+};
+
+#define MAX_AUXTRACE_ERROR_MSG 64
+
+struct auxtrace_error_event {
+	struct perf_event_header header;
+	uint32_t type;
+	uint32_t code;
+	uint32_t cpu;
+	uint32_t pid;
+	uint32_t tid;
+	uint32_t reserved__; /* For alignment */
+	uint64_t ip;
+	char msg[MAX_AUXTRACE_ERROR_MSG];
+};
+
+	PERF_RECORD_HEADER_FEATURE		= 80,
+
+Describes a header feature. These are records used in pipe-mode that
+contain information that otherwise would be in perf.data file's header.
+
+Event types
+
+Define the event attributes with their IDs.
+
+An array bound by the perf_file_section size.
+
+	struct {
+		struct perf_event_attr attr;   /* Size defined by header.attr_size */
+		struct perf_file_section ids;
+	}
+
+ids points to a array of uint64_t defining the ids for event attr attr.
+
+Pipe-mode data
+
+Pipe-mode avoid seeks in the file by removing the perf_file_section and flags
+from the struct perf_header. The trimmed header is:
+
+struct perf_pipe_file_header {
+	u64				magic;
+	u64				size;
+};
+
+The information about attrs, data, and event_types is instead in the
+synthesized events PERF_RECORD_ATTR, PERF_RECORD_HEADER_TRACING_DATA,
+PERF_RECORD_HEADER_EVENT_TYPE, and PERF_RECORD_HEADER_FEATURE
+that are generated by perf record in pipe-mode.
+
+
+References:
+
+include/uapi/linux/perf_event.h
+
+This is the canonical description of the kernel generated perf_events
+and the perf_event_attrs.
+
+perf_events manpage
+
+A manpage describing perf_event and perf_event_attr is here:
+http://web.eece.maine.edu/~vweaver/projects/perf_events/programming.html
+This tends to be slightly behind the kernel include, but has better
+descriptions.  An (typically older) version of the man page may be
+included with the standard Linux man pages, available with "man
+perf_events"
+
+pmu-tools
+
+https://github.com/andikleen/pmu-tools/tree/master/parser
+
+A definition of the perf.data format in python "construct" format is available
+in pmu-tools parser. This allows to read perf.data from python and dump it.
+
+quipper
+
+The quipper C++ parser is available at
+http://github.com/google/perf_data_converter/tree/master/src/quipper
+