diff options
Diffstat (limited to 'tools/testing/selftests/net/rtnetlink.sh')
-rwxr-xr-x | tools/testing/selftests/net/rtnetlink.sh | 1023 |
1 files changed, 1023 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh new file mode 100755 index 000000000..ff665de78 --- /dev/null +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -0,0 +1,1023 @@ +#!/bin/bash +# +# This test is for checking rtnetlink callpaths, and get as much coverage as possible. +# +# set -e + +devdummy="test-dummy0" +ret=0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +# set global exit status, but never reset nonzero one. +check_err() +{ + if [ $ret -eq 0 ]; then + ret=$1 + fi +} + +# same but inverted -- used when command must fail for test to pass +check_fail() +{ + if [ $1 -eq 0 ]; then + ret=1 + fi +} + +kci_add_dummy() +{ + ip link add name "$devdummy" type dummy + check_err $? + ip link set "$devdummy" up + check_err $? +} + +kci_del_dummy() +{ + ip link del dev "$devdummy" + check_err $? +} + +kci_test_netconf() +{ + dev="$1" + r=$ret + + ip netconf show dev "$dev" > /dev/null + check_err $? + + for f in 4 6; do + ip -$f netconf show dev "$dev" > /dev/null + check_err $? + done + + if [ $ret -ne 0 ] ;then + echo "FAIL: ip netconf show $dev" + test $r -eq 0 && ret=0 + return 1 + fi +} + +# add a bridge with vlans on top +kci_test_bridge() +{ + devbr="test-br0" + vlandev="testbr-vlan1" + + ret=0 + ip link add name "$devbr" type bridge + check_err $? + + ip link set dev "$devdummy" master "$devbr" + check_err $? + + ip link set "$devbr" up + check_err $? + + ip link add link "$devbr" name "$vlandev" type vlan id 1 + check_err $? + ip addr add dev "$vlandev" 10.200.7.23/30 + check_err $? + ip -6 addr add dev "$vlandev" dead:42::1234/64 + check_err $? + ip -d link > /dev/null + check_err $? + ip r s t all > /dev/null + check_err $? + + for name in "$devbr" "$vlandev" "$devdummy" ; do + kci_test_netconf "$name" + done + + ip -6 addr del dev "$vlandev" dead:42::1234/64 + check_err $? + + ip link del dev "$vlandev" + check_err $? + ip link del dev "$devbr" + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: bridge setup" + return 1 + fi + echo "PASS: bridge setup" + +} + +kci_test_gre() +{ + gredev=neta + rem=10.42.42.1 + loc=10.0.0.1 + + ret=0 + ip tunnel add $gredev mode gre remote $rem local $loc ttl 1 + check_err $? + ip link set $gredev up + check_err $? + ip addr add 10.23.7.10 dev $gredev + check_err $? + ip route add 10.23.8.0/30 dev $gredev + check_err $? + ip addr add dev "$devdummy" 10.23.7.11/24 + check_err $? + ip link > /dev/null + check_err $? + ip addr > /dev/null + check_err $? + + kci_test_netconf "$gredev" + + ip addr del dev "$devdummy" 10.23.7.11/24 + check_err $? + + ip link del $gredev + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: gre tunnel endpoint" + return 1 + fi + echo "PASS: gre tunnel endpoint" +} + +# tc uses rtnetlink too, for full tc testing +# please see tools/testing/selftests/tc-testing. +kci_test_tc() +{ + dev=lo + ret=0 + + tc qdisc add dev "$dev" root handle 1: htb + check_err $? + tc class add dev "$dev" parent 1: classid 1:10 htb rate 1mbit + check_err $? + tc filter add dev "$dev" parent 1:0 prio 5 handle ffe: protocol ip u32 divisor 256 + check_err $? + tc filter add dev "$dev" parent 1:0 prio 5 handle ffd: protocol ip u32 divisor 256 + check_err $? + tc filter add dev "$dev" parent 1:0 prio 5 handle ffc: protocol ip u32 divisor 256 + check_err $? + tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 ht ffe:2: match ip src 10.0.0.3 flowid 1:10 + check_err $? + tc filter add dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:2 u32 ht ffe:2: match ip src 10.0.0.2 flowid 1:10 + check_err $? + tc filter show dev "$dev" parent 1:0 > /dev/null + check_err $? + tc filter del dev "$dev" protocol ip parent 1: prio 5 handle ffe:2:3 u32 + check_err $? + tc filter show dev "$dev" parent 1:0 > /dev/null + check_err $? + tc qdisc del dev "$dev" root handle 1: htb + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: tc htb hierarchy" + return 1 + fi + echo "PASS: tc htb hierarchy" + +} + +kci_test_polrouting() +{ + ret=0 + ip rule add fwmark 1 lookup 100 + check_err $? + ip route add local 0.0.0.0/0 dev lo table 100 + check_err $? + ip r s t all > /dev/null + check_err $? + ip rule del fwmark 1 lookup 100 + check_err $? + ip route del local 0.0.0.0/0 dev lo table 100 + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: policy route test" + return 1 + fi + echo "PASS: policy routing" +} + +kci_test_route_get() +{ + ret=0 + + ip route get 127.0.0.1 > /dev/null + check_err $? + ip route get 127.0.0.1 dev "$devdummy" > /dev/null + check_err $? + ip route get ::1 > /dev/null + check_err $? + ip route get fe80::1 dev "$devdummy" > /dev/null + check_err $? + ip route get 127.0.0.1 from 127.0.0.1 oif lo tos 0x1 mark 0x1 > /dev/null + check_err $? + ip route get ::1 from ::1 iif lo oif lo tos 0x1 mark 0x1 > /dev/null + check_err $? + ip addr add dev "$devdummy" 10.23.7.11/24 + check_err $? + ip route get 10.23.7.11 from 10.23.7.12 iif "$devdummy" > /dev/null + check_err $? + ip addr del dev "$devdummy" 10.23.7.11/24 + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: route get" + return 1 + fi + + echo "PASS: route get" +} + +kci_test_addrlft() +{ + for i in $(seq 10 100) ;do + lft=$(((RANDOM%3) + 1)) + ip addr add 10.23.11.$i/32 dev "$devdummy" preferred_lft $lft valid_lft $((lft+1)) + check_err $? + done + + sleep 5 + + ip addr show dev "$devdummy" | grep "10.23.11." + if [ $? -eq 0 ]; then + echo "FAIL: preferred_lft addresses remaining" + check_err 1 + return + fi + + echo "PASS: preferred_lft addresses have expired" +} + +kci_test_addrlabel() +{ + ret=0 + + ip addrlabel add prefix dead::/64 dev lo label 1 + check_err $? + + ip addrlabel list |grep -q "prefix dead::/64 dev lo label 1" + check_err $? + + ip addrlabel del prefix dead::/64 dev lo label 1 2> /dev/null + check_err $? + + ip addrlabel add prefix dead::/64 label 1 2> /dev/null + check_err $? + + ip addrlabel del prefix dead::/64 label 1 2> /dev/null + check_err $? + + # concurrent add/delete + for i in $(seq 1 1000); do + ip addrlabel add prefix 1c3::/64 label 12345 2>/dev/null + done & + + for i in $(seq 1 1000); do + ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null + done + + wait + + ip addrlabel del prefix 1c3::/64 label 12345 2>/dev/null + + if [ $ret -ne 0 ];then + echo "FAIL: ipv6 addrlabel" + return 1 + fi + + echo "PASS: ipv6 addrlabel" +} + +kci_test_ifalias() +{ + ret=0 + namewant=$(uuidgen) + syspathname="/sys/class/net/$devdummy/ifalias" + + ip link set dev "$devdummy" alias "$namewant" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: cannot set interface alias of $devdummy to $namewant" + return 1 + fi + + ip link show "$devdummy" | grep -q "alias $namewant" + check_err $? + + if [ -r "$syspathname" ] ; then + read namehave < "$syspathname" + if [ "$namewant" != "$namehave" ]; then + echo "FAIL: did set ifalias $namewant but got $namehave" + return 1 + fi + + namewant=$(uuidgen) + echo "$namewant" > "$syspathname" + ip link show "$devdummy" | grep -q "alias $namewant" + check_err $? + + # sysfs interface allows to delete alias again + echo "" > "$syspathname" + + ip link show "$devdummy" | grep -q "alias $namewant" + check_fail $? + + for i in $(seq 1 100); do + uuidgen > "$syspathname" & + done + + wait + + # re-add the alias -- kernel should free mem when dummy dev is removed + ip link set dev "$devdummy" alias "$namewant" + check_err $? + fi + + if [ $ret -ne 0 ]; then + echo "FAIL: set interface alias $devdummy to $namewant" + return 1 + fi + + echo "PASS: set ifalias $namewant for $devdummy" +} + +kci_test_vrf() +{ + vrfname="test-vrf" + ret=0 + + ip link show type vrf 2>/dev/null + if [ $? -ne 0 ]; then + echo "SKIP: vrf: iproute2 too old" + return $ksft_skip + fi + + ip link add "$vrfname" type vrf table 10 + check_err $? + if [ $ret -ne 0 ];then + echo "FAIL: can't add vrf interface, skipping test" + return 0 + fi + + ip -br link show type vrf | grep -q "$vrfname" + check_err $? + if [ $ret -ne 0 ];then + echo "FAIL: created vrf device not found" + return 1 + fi + + ip link set dev "$vrfname" up + check_err $? + + ip link set dev "$devdummy" master "$vrfname" + check_err $? + ip link del dev "$vrfname" + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: vrf" + return 1 + fi + + echo "PASS: vrf" +} + +kci_test_encap_vxlan() +{ + ret=0 + vxlan="test-vxlan0" + vlan="test-vlan0" + testns="$1" + + ip netns exec "$testns" ip link add "$vxlan" type vxlan id 42 group 239.1.1.1 \ + dev "$devdummy" dstport 4789 2>/dev/null + if [ $? -ne 0 ]; then + echo "FAIL: can't add vxlan interface, skipping test" + return 0 + fi + check_err $? + + ip netns exec "$testns" ip addr add 10.2.11.49/24 dev "$vxlan" + check_err $? + + ip netns exec "$testns" ip link set up dev "$vxlan" + check_err $? + + ip netns exec "$testns" ip link add link "$vxlan" name "$vlan" type vlan id 1 + check_err $? + + ip netns exec "$testns" ip link del "$vxlan" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: vxlan" + return 1 + fi + echo "PASS: vxlan" +} + +kci_test_encap_fou() +{ + ret=0 + name="test-fou" + testns="$1" + + ip fou help 2>&1 |grep -q 'Usage: ip fou' + if [ $? -ne 0 ];then + echo "SKIP: fou: iproute2 too old" + return $ksft_skip + fi + + ip netns exec "$testns" ip fou add port 7777 ipproto 47 2>/dev/null + if [ $? -ne 0 ];then + echo "FAIL: can't add fou port 7777, skipping test" + return 1 + fi + + ip netns exec "$testns" ip fou add port 8888 ipproto 4 + check_err $? + + ip netns exec "$testns" ip fou del port 9999 2>/dev/null + check_fail $? + + ip netns exec "$testns" ip fou del port 7777 + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: fou" + return 1 + fi + + echo "PASS: fou" +} + +# test various encap methods, use netns to avoid unwanted interference +kci_test_encap() +{ + testns="testns" + ret=0 + + ip netns add "$testns" + if [ $? -ne 0 ]; then + echo "SKIP encap tests: cannot add net namespace $testns" + return $ksft_skip + fi + + ip netns exec "$testns" ip link set lo up + check_err $? + + ip netns exec "$testns" ip link add name "$devdummy" type dummy + check_err $? + ip netns exec "$testns" ip link set "$devdummy" up + check_err $? + + kci_test_encap_vxlan "$testns" + kci_test_encap_fou "$testns" + + ip netns del "$testns" +} + +kci_test_macsec() +{ + msname="test_macsec0" + ret=0 + + ip macsec help 2>&1 | grep -q "^Usage: ip macsec" + if [ $? -ne 0 ]; then + echo "SKIP: macsec: iproute2 too old" + return $ksft_skip + fi + + ip link add link "$devdummy" "$msname" type macsec port 42 encrypt on + check_err $? + if [ $ret -ne 0 ];then + echo "FAIL: can't add macsec interface, skipping test" + return 1 + fi + + ip macsec add "$msname" tx sa 0 pn 1024 on key 01 12345678901234567890123456789012 + check_err $? + + ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" + check_err $? + + ip macsec add "$msname" rx port 1234 address "1c:ed:de:ad:be:ef" sa 0 pn 1 on key 00 0123456789abcdef0123456789abcdef + check_err $? + + ip macsec show > /dev/null + check_err $? + + ip link del dev "$msname" + check_err $? + + if [ $ret -ne 0 ];then + echo "FAIL: macsec" + return 1 + fi + + echo "PASS: macsec" +} + +#------------------------------------------------------------------- +# Example commands +# ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \ +# spi 0x07 mode transport reqid 0x07 replay-window 32 \ +# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ +# sel src 14.0.0.52/24 dst 14.0.0.70/24 +# ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \ +# tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \ +# spi 0x07 mode transport reqid 0x07 +# +# Subcommands not tested +# ip x s update +# ip x s allocspi +# ip x s deleteall +# ip x p update +# ip x p deleteall +# ip x p set +#------------------------------------------------------------------- +kci_test_ipsec() +{ + ret=0 + algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" + srcip=192.168.123.1 + dstip=192.168.123.2 + spi=7 + + ip addr add $srcip dev $devdummy + + # flush to be sure there's nothing configured + ip x s flush ; ip x p flush + check_err $? + + # start the monitor in the background + tmpfile=`mktemp /var/run/ipsectestXXX` + mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null` + sleep 0.2 + + ipsecid="proto esp src $srcip dst $dstip spi 0x07" + ip x s add $ipsecid \ + mode transport reqid 0x07 replay-window 32 \ + $algo sel src $srcip/24 dst $dstip/24 + check_err $? + + lines=`ip x s list | grep $srcip | grep $dstip | wc -l` + test $lines -eq 2 + check_err $? + + ip x s count | grep -q "SAD count 1" + check_err $? + + lines=`ip x s get $ipsecid | grep $srcip | grep $dstip | wc -l` + test $lines -eq 2 + check_err $? + + ip x s delete $ipsecid + check_err $? + + lines=`ip x s list | wc -l` + test $lines -eq 0 + check_err $? + + ipsecsel="dir out src $srcip/24 dst $dstip/24" + ip x p add $ipsecsel \ + tmpl proto esp src $srcip dst $dstip \ + spi 0x07 mode transport reqid 0x07 + check_err $? + + lines=`ip x p list | grep $srcip | grep $dstip | wc -l` + test $lines -eq 2 + check_err $? + + ip x p count | grep -q "SPD IN 0 OUT 1 FWD 0" + check_err $? + + lines=`ip x p get $ipsecsel | grep $srcip | grep $dstip | wc -l` + test $lines -eq 2 + check_err $? + + ip x p delete $ipsecsel + check_err $? + + lines=`ip x p list | wc -l` + test $lines -eq 0 + check_err $? + + # check the monitor results + kill $mpid + lines=`wc -l $tmpfile | cut "-d " -f1` + test $lines -eq 20 + check_err $? + rm -rf $tmpfile + + # clean up any leftovers + ip x s flush + check_err $? + ip x p flush + check_err $? + ip addr del $srcip/32 dev $devdummy + + if [ $ret -ne 0 ]; then + echo "FAIL: ipsec" + return 1 + fi + echo "PASS: ipsec" +} + +#------------------------------------------------------------------- +# Example commands +# ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \ +# spi 0x07 mode transport reqid 0x07 replay-window 32 \ +# aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \ +# sel src 14.0.0.52/24 dst 14.0.0.70/24 +# offload dev sim1 dir out +# ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \ +# tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \ +# spi 0x07 mode transport reqid 0x07 +# +#------------------------------------------------------------------- +kci_test_ipsec_offload() +{ + ret=0 + algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128" + srcip=192.168.123.3 + dstip=192.168.123.4 + dev=simx1 + sysfsd=/sys/kernel/debug/netdevsim/$dev + sysfsf=$sysfsd/ipsec + + # setup netdevsim since dummydev doesn't have offload support + modprobe netdevsim + check_err $? + if [ $ret -ne 0 ]; then + echo "FAIL: ipsec_offload can't load netdevsim" + return 1 + fi + + ip link add $dev type netdevsim + ip addr add $srcip dev $dev + ip link set $dev up + if [ ! -d $sysfsd ] ; then + echo "FAIL: ipsec_offload can't create device $dev" + return 1 + fi + if [ ! -f $sysfsf ] ; then + echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload" + return 1 + fi + + # flush to be sure there's nothing configured + ip x s flush ; ip x p flush + + # create offloaded SAs, both in and out + ip x p add dir out src $srcip/24 dst $dstip/24 \ + tmpl proto esp src $srcip dst $dstip spi 9 \ + mode transport reqid 42 + check_err $? + ip x p add dir out src $dstip/24 dst $srcip/24 \ + tmpl proto esp src $dstip dst $srcip spi 9 \ + mode transport reqid 42 + check_err $? + + ip x s add proto esp src $srcip dst $dstip spi 9 \ + mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \ + offload dev $dev dir out + check_err $? + ip x s add proto esp src $dstip dst $srcip spi 9 \ + mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \ + offload dev $dev dir in + check_err $? + if [ $ret -ne 0 ]; then + echo "FAIL: ipsec_offload can't create SA" + return 1 + fi + + # does offload show up in ip output + lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"` + if [ $lines -ne 2 ] ; then + echo "FAIL: ipsec_offload SA offload missing from list output" + check_err 1 + fi + + # use ping to exercise the Tx path + ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null + + # does driver have correct offload info + diff $sysfsf - << EOF +SA count=2 tx=3 +sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000 +sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 +sa[0] key=0x34333231 38373635 32313039 36353433 +sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0 +sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 +sa[1] key=0x34333231 38373635 32313039 36353433 +EOF + if [ $? -ne 0 ] ; then + echo "FAIL: ipsec_offload incorrect driver data" + check_err 1 + fi + + # does offload get removed from driver + ip x s flush + ip x p flush + lines=`grep -c "SA count=0" $sysfsf` + if [ $lines -ne 1 ] ; then + echo "FAIL: ipsec_offload SA not removed from driver" + check_err 1 + fi + + # clean up any leftovers + ip link del $dev + rmmod netdevsim + + if [ $ret -ne 0 ]; then + echo "FAIL: ipsec_offload" + return 1 + fi + echo "PASS: ipsec_offload" +} + +kci_test_gretap() +{ + testns="testns" + DEV_NS=gretap00 + ret=0 + + ip netns add "$testns" + if [ $? -ne 0 ]; then + echo "SKIP gretap tests: cannot add net namespace $testns" + return $ksft_skip + fi + + ip link help gretap 2>&1 | grep -q "^Usage:" + if [ $? -ne 0 ];then + echo "SKIP: gretap: iproute2 too old" + ip netns del "$testns" + return $ksft_skip + fi + + # test native tunnel + ip netns exec "$testns" ip link add dev "$DEV_NS" type gretap seq \ + key 102 local 172.16.1.100 remote 172.16.1.200 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" 10.1.1.100/24 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test external mode + ip netns exec "$testns" ip link add dev "$DEV_NS" type gretap external + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: gretap" + ip netns del "$testns" + return 1 + fi + echo "PASS: gretap" + + ip netns del "$testns" +} + +kci_test_ip6gretap() +{ + testns="testns" + DEV_NS=ip6gretap00 + ret=0 + + ip netns add "$testns" + if [ $? -ne 0 ]; then + echo "SKIP ip6gretap tests: cannot add net namespace $testns" + return $ksft_skip + fi + + ip link help ip6gretap 2>&1 | grep -q "^Usage:" + if [ $? -ne 0 ];then + echo "SKIP: ip6gretap: iproute2 too old" + ip netns del "$testns" + return $ksft_skip + fi + + # test native tunnel + ip netns exec "$testns" ip link add dev "$DEV_NS" type ip6gretap seq \ + key 102 local fc00:100::1 remote fc00:100::2 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" fc00:200::1/96 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test external mode + ip netns exec "$testns" ip link add dev "$DEV_NS" type ip6gretap external + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: ip6gretap" + ip netns del "$testns" + return 1 + fi + echo "PASS: ip6gretap" + + ip netns del "$testns" +} + +kci_test_erspan() +{ + testns="testns" + DEV_NS=erspan00 + ret=0 + + ip link help erspan 2>&1 | grep -q "^Usage:" + if [ $? -ne 0 ];then + echo "SKIP: erspan: iproute2 too old" + return $ksft_skip + fi + + ip netns add "$testns" + if [ $? -ne 0 ]; then + echo "SKIP erspan tests: cannot add net namespace $testns" + return $ksft_skip + fi + + # test native tunnel erspan v1 + ip netns exec "$testns" ip link add dev "$DEV_NS" type erspan seq \ + key 102 local 172.16.1.100 remote 172.16.1.200 \ + erspan_ver 1 erspan 488 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" 10.1.1.100/24 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test native tunnel erspan v2 + ip netns exec "$testns" ip link add dev "$DEV_NS" type erspan seq \ + key 102 local 172.16.1.100 remote 172.16.1.200 \ + erspan_ver 2 erspan_dir ingress erspan_hwid 7 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" 10.1.1.100/24 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test external mode + ip netns exec "$testns" ip link add dev "$DEV_NS" type erspan external + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: erspan" + ip netns del "$testns" + return 1 + fi + echo "PASS: erspan" + + ip netns del "$testns" +} + +kci_test_ip6erspan() +{ + testns="testns" + DEV_NS=ip6erspan00 + ret=0 + + ip link help ip6erspan 2>&1 | grep -q "^Usage:" + if [ $? -ne 0 ];then + echo "SKIP: ip6erspan: iproute2 too old" + return $ksft_skip + fi + + ip netns add "$testns" + if [ $? -ne 0 ]; then + echo "SKIP ip6erspan tests: cannot add net namespace $testns" + return $ksft_skip + fi + + # test native tunnel ip6erspan v1 + ip netns exec "$testns" ip link add dev "$DEV_NS" type ip6erspan seq \ + key 102 local fc00:100::1 remote fc00:100::2 \ + erspan_ver 1 erspan 488 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" 10.1.1.100/24 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test native tunnel ip6erspan v2 + ip netns exec "$testns" ip link add dev "$DEV_NS" type ip6erspan seq \ + key 102 local fc00:100::1 remote fc00:100::2 \ + erspan_ver 2 erspan_dir ingress erspan_hwid 7 + check_err $? + + ip netns exec "$testns" ip addr add dev "$DEV_NS" 10.1.1.100/24 + check_err $? + + ip netns exec "$testns" ip link set dev $DEV_NS up + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + # test external mode + ip netns exec "$testns" ip link add dev "$DEV_NS" \ + type ip6erspan external + check_err $? + + ip netns exec "$testns" ip link del "$DEV_NS" + check_err $? + + if [ $ret -ne 0 ]; then + echo "FAIL: ip6erspan" + ip netns del "$testns" + return 1 + fi + echo "PASS: ip6erspan" + + ip netns del "$testns" +} + +kci_test_rtnl() +{ + kci_add_dummy + if [ $ret -ne 0 ];then + echo "FAIL: cannot add dummy interface" + return 1 + fi + + kci_test_polrouting + kci_test_route_get + kci_test_addrlft + kci_test_tc + kci_test_gre + kci_test_gretap + kci_test_ip6gretap + kci_test_erspan + kci_test_ip6erspan + kci_test_bridge + kci_test_addrlabel + kci_test_ifalias + kci_test_vrf + kci_test_encap + kci_test_macsec + kci_test_ipsec + kci_test_ipsec_offload + + kci_del_dummy +} + +#check for needed privileges +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit $ksft_skip +fi + +for x in ip tc;do + $x -Version 2>/dev/null >/dev/null + if [ $? -ne 0 ];then + echo "SKIP: Could not run test without the $x tool" + exit $ksft_skip + fi +done + +kci_test_rtnl + +exit $ret |