From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Mon, 6 May 2024 03:02:30 +0200
Subject: Adding upstream version 4.19.249.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 Documentation/networking/netdevices.txt | 104 ++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/networking/netdevices.txt

(limited to 'Documentation/networking/netdevices.txt')

diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
new file mode 100644
index 000000000..7fec2061a
--- /dev/null
+++ b/Documentation/networking/netdevices.txt
@@ -0,0 +1,104 @@
+
+Network Devices, the Kernel, and You!
+
+
+Introduction
+============
+The following is a random collection of documentation regarding
+network devices.
+
+struct net_device allocation rules
+==================================
+Network device structures need to persist even after module is unloaded and
+must be allocated with alloc_netdev_mqs() and friends.
+If device has registered successfully, it will be freed on last use
+by free_netdev(). This is required to handle the pathologic case cleanly
+(example: rmmod mydriver </sys/class/net/myeth/mtu )
+
+alloc_netdev_mqs()/alloc_netdev() reserve extra space for driver
+private data which gets freed when the network device is freed. If
+separately allocated data is attached to the network device
+(netdev_priv(dev)) then it is up to the module exit handler to free that.
+
+MTU
+===
+Each network device has a Maximum Transfer Unit. The MTU does not
+include any link layer protocol overhead. Upper layer protocols must
+not pass a socket buffer (skb) to a device to transmit with more data
+than the mtu. The MTU does not include link layer header overhead, so
+for example on Ethernet if the standard MTU is 1500 bytes used, the
+actual skb will contain up to 1514 bytes because of the Ethernet
+header. Devices should allow for the 4 byte VLAN header as well.
+
+Segmentation Offload (GSO, TSO) is an exception to this rule.  The
+upper layer protocol may pass a large socket buffer to the device
+transmit routine, and the device will break that up into separate
+packets based on the current MTU.
+
+MTU is symmetrical and applies both to receive and transmit. A device
+must be able to receive at least the maximum size packet allowed by
+the MTU. A network device may use the MTU as mechanism to size receive
+buffers, but the device should allow packets with VLAN header. With
+standard Ethernet mtu of 1500 bytes, the device should allow up to
+1518 byte packets (1500 + 14 header + 4 tag).  The device may either:
+drop, truncate, or pass up oversize packets, but dropping oversize
+packets is preferred.
+
+
+struct net_device synchronization rules
+=======================================
+ndo_open:
+	Synchronization: rtnl_lock() semaphore.
+	Context: process
+
+ndo_stop:
+	Synchronization: rtnl_lock() semaphore.
+	Context: process
+	Note: netif_running() is guaranteed false
+
+ndo_do_ioctl:
+	Synchronization: rtnl_lock() semaphore.
+	Context: process
+
+ndo_get_stats:
+	Synchronization: dev_base_lock rwlock.
+	Context: nominally process, but don't sleep inside an rwlock
+
+ndo_start_xmit:
+	Synchronization: __netif_tx_lock spinlock.
+
+	When the driver sets NETIF_F_LLTX in dev->features this will be
+	called without holding netif_tx_lock. In this case the driver
+	has to lock by itself when needed.
+	The locking there should also properly protect against
+	set_rx_mode. WARNING: use of NETIF_F_LLTX is deprecated.
+	Don't use it for new drivers.
+
+	Context: Process with BHs disabled or BH (timer),
+	         will be called with interrupts disabled by netconsole.
+
+	Return codes: 
+	o NETDEV_TX_OK everything ok. 
+	o NETDEV_TX_BUSY Cannot transmit packet, try later 
+	  Usually a bug, means queue start/stop flow control is broken in
+	  the driver. Note: the driver must NOT put the skb in its DMA ring.
+
+ndo_tx_timeout:
+	Synchronization: netif_tx_lock spinlock; all TX queues frozen.
+	Context: BHs disabled
+	Notes: netif_queue_stopped() is guaranteed true
+
+ndo_set_rx_mode:
+	Synchronization: netif_addr_lock spinlock.
+	Context: BHs disabled
+
+struct napi_struct synchronization rules
+========================================
+napi->poll:
+	Synchronization: NAPI_STATE_SCHED bit in napi->state.  Device
+		driver's ndo_stop method will invoke napi_disable() on
+		all NAPI instances which will do a sleeping poll on the
+		NAPI_STATE_SCHED napi->state bit, waiting for all pending
+		NAPI activity to cease.
+	Context: softirq
+	         will be called with interrupts disabled by netconsole.
-- 
cgit v1.2.3