From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- Documentation/power/drivers-testing.txt | 46 +++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/power/drivers-testing.txt (limited to 'Documentation/power/drivers-testing.txt') diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt new file mode 100644 index 000000000..638afdf4d --- /dev/null +++ b/Documentation/power/drivers-testing.txt @@ -0,0 +1,46 @@ +Testing suspend and resume support in device drivers + (C) 2007 Rafael J. Wysocki , GPL + +1. Preparing the test system + +Unfortunately, to effectively test the support for the system-wide suspend and +resume transitions in a driver, it is necessary to suspend and resume a fully +functional system with this driver loaded. Moreover, that should be done +several times, preferably several times in a row, and separately for hibernation +(aka suspend to disk or STD) and suspend to RAM (STR), because each of these +cases involves slightly different operations and different interactions with +the machine's BIOS. + +Of course, for this purpose the test system has to be known to suspend and +resume without the driver being tested. Thus, if possible, you should first +resolve all suspend/resume-related problems in the test system before you start +testing the new driver. Please see Documentation/power/basic-pm-debugging.txt +for more information about the debugging of suspend/resume functionality. + +2. Testing the driver + +Once you have resolved the suspend/resume-related problems with your test system +without the new driver, you are ready to test it: + +a) Build the driver as a module, load it and try the test modes of hibernation + (see: Documentation/power/basic-pm-debugging.txt, 1). + +b) Load the driver and attempt to hibernate in the "reboot", "shutdown" and + "platform" modes (see: Documentation/power/basic-pm-debugging.txt, 1). + +c) Compile the driver directly into the kernel and try the test modes of + hibernation. + +d) Attempt to hibernate with the driver compiled directly into the kernel + in the "reboot", "shutdown" and "platform" modes. + +e) Try the test modes of suspend (see: Documentation/power/basic-pm-debugging.txt, + 2). [As far as the STR tests are concerned, it should not matter whether or + not the driver is built as a module.] + +f) Attempt to suspend to RAM using the s2ram tool with the driver loaded + (see: Documentation/power/basic-pm-debugging.txt, 2). + +Each of the above tests should be repeated several times and the STD tests +should be mixed with the STR tests. If any of them fails, the driver cannot be +regarded as suspend/resume-safe. -- cgit v1.2.3