From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- Documentation/process/adding-syscalls.rst | 574 ++++++++++++++++++++++++++++++ 1 file changed, 574 insertions(+) create mode 100644 Documentation/process/adding-syscalls.rst (limited to 'Documentation/process/adding-syscalls.rst') diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst new file mode 100644 index 000000000..0d4f29bc7 --- /dev/null +++ b/Documentation/process/adding-syscalls.rst @@ -0,0 +1,574 @@ +Adding a New System Call +======================== + +This document describes what's involved in adding a new system call to the +Linux kernel, over and above the normal submission advice in +:ref:`Documentation/process/submitting-patches.rst `. + + +System Call Alternatives +------------------------ + +The first thing to consider when adding a new system call is whether one of +the alternatives might be suitable instead. Although system calls are the +most traditional and most obvious interaction points between userspace and the +kernel, there are other possibilities -- choose what fits best for your +interface. + + - If the operations involved can be made to look like a filesystem-like + object, it may make more sense to create a new filesystem or device. This + also makes it easier to encapsulate the new functionality in a kernel module + rather than requiring it to be built into the main kernel. + + - If the new functionality involves operations where the kernel notifies + userspace that something has happened, then returning a new file + descriptor for the relevant object allows userspace to use + ``poll``/``select``/``epoll`` to receive that notification. + - However, operations that don't map to + :manpage:`read(2)`/:manpage:`write(2)`-like operations + have to be implemented as :manpage:`ioctl(2)` requests, which can lead + to a somewhat opaque API. + + - If you're just exposing runtime system information, a new node in sysfs + (see ``Documentation/filesystems/sysfs.txt``) or the ``/proc`` filesystem may + be more appropriate. However, access to these mechanisms requires that the + relevant filesystem is mounted, which might not always be the case (e.g. + in a namespaced/sandboxed/chrooted environment). Avoid adding any API to + debugfs, as this is not considered a 'production' interface to userspace. + - If the operation is specific to a particular file or file descriptor, then + an additional :manpage:`fcntl(2)` command option may be more appropriate. However, + :manpage:`fcntl(2)` is a multiplexing system call that hides a lot of complexity, so + this option is best for when the new function is closely analogous to + existing :manpage:`fcntl(2)` functionality, or the new functionality is very simple + (for example, getting/setting a simple flag related to a file descriptor). + - If the operation is specific to a particular task or process, then an + additional :manpage:`prctl(2)` command option may be more appropriate. As + with :manpage:`fcntl(2)`, this system call is a complicated multiplexor so + is best reserved for near-analogs of existing ``prctl()`` commands or + getting/setting a simple flag related to a process. + + +Designing the API: Planning for Extension +----------------------------------------- + +A new system call forms part of the API of the kernel, and has to be supported +indefinitely. As such, it's a very good idea to explicitly discuss the +interface on the kernel mailing list, and it's important to plan for future +extensions of the interface. + +(The syscall table is littered with historical examples where this wasn't done, +together with the corresponding follow-up system calls -- +``eventfd``/``eventfd2``, ``dup2``/``dup3``, ``inotify_init``/``inotify_init1``, +``pipe``/``pipe2``, ``renameat``/``renameat2`` -- so +learn from the history of the kernel and plan for extensions from the start.) + +For simpler system calls that only take a couple of arguments, the preferred +way to allow for future extensibility is to include a flags argument to the +system call. To make sure that userspace programs can safely use flags +between kernel versions, check whether the flags value holds any unknown +flags, and reject the system call (with ``EINVAL``) if it does:: + + if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3)) + return -EINVAL; + +(If no flags values are used yet, check that the flags argument is zero.) + +For more sophisticated system calls that involve a larger number of arguments, +it's preferred to encapsulate the majority of the arguments into a structure +that is passed in by pointer. Such a structure can cope with future extension +by including a size argument in the structure:: + + struct xyzzy_params { + u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */ + u32 param_1; + u64 param_2; + u64 param_3; + }; + +As long as any subsequently added field, say ``param_4``, is designed so that a +zero value gives the previous behaviour, then this allows both directions of +version mismatch: + + - To cope with a later userspace program calling an older kernel, the kernel + code should check that any memory beyond the size of the structure that it + expects is zero (effectively checking that ``param_4 == 0``). + - To cope with an older userspace program calling a newer kernel, the kernel + code can zero-extend a smaller instance of the structure (effectively + setting ``param_4 = 0``). + +See :manpage:`perf_event_open(2)` and the ``perf_copy_attr()`` function (in +``kernel/events/core.c``) for an example of this approach. + + +Designing the API: Other Considerations +--------------------------------------- + +If your new system call allows userspace to refer to a kernel object, it +should use a file descriptor as the handle for that object -- don't invent a +new type of userspace object handle when the kernel already has mechanisms and +well-defined semantics for using file descriptors. + +If your new :manpage:`xyzzy(2)` system call does return a new file descriptor, +then the flags argument should include a value that is equivalent to setting +``O_CLOEXEC`` on the new FD. This makes it possible for userspace to close +the timing window between ``xyzzy()`` and calling +``fcntl(fd, F_SETFD, FD_CLOEXEC)``, where an unexpected ``fork()`` and +``execve()`` in another thread could leak a descriptor to +the exec'ed program. (However, resist the temptation to re-use the actual value +of the ``O_CLOEXEC`` constant, as it is architecture-specific and is part of a +numbering space of ``O_*`` flags that is fairly full.) + +If your system call returns a new file descriptor, you should also consider +what it means to use the :manpage:`poll(2)` family of system calls on that file +descriptor. Making a file descriptor ready for reading or writing is the +normal way for the kernel to indicate to userspace that an event has +occurred on the corresponding kernel object. + +If your new :manpage:`xyzzy(2)` system call involves a filename argument:: + + int sys_xyzzy(const char __user *path, ..., unsigned int flags); + +you should also consider whether an :manpage:`xyzzyat(2)` version is more appropriate:: + + int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags); + +This allows more flexibility for how userspace specifies the file in question; +in particular it allows userspace to request the functionality for an +already-opened file descriptor using the ``AT_EMPTY_PATH`` flag, effectively +giving an :manpage:`fxyzzy(3)` operation for free:: + + - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...) + - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...) + +(For more details on the rationale of the \*at() calls, see the +:manpage:`openat(2)` man page; for an example of AT_EMPTY_PATH, see the +:manpage:`fstatat(2)` man page.) + +If your new :manpage:`xyzzy(2)` system call involves a parameter describing an +offset within a file, make its type ``loff_t`` so that 64-bit offsets can be +supported even on 32-bit architectures. + +If your new :manpage:`xyzzy(2)` system call involves privileged functionality, +it needs to be governed by the appropriate Linux capability bit (checked with +a call to ``capable()``), as described in the :manpage:`capabilities(7)` man +page. Choose an existing capability bit that governs related functionality, +but try to avoid combining lots of only vaguely related functions together +under the same bit, as this goes against capabilities' purpose of splitting +the power of root. In particular, avoid adding new uses of the already +overly-general ``CAP_SYS_ADMIN`` capability. + +If your new :manpage:`xyzzy(2)` system call manipulates a process other than +the calling process, it should be restricted (using a call to +``ptrace_may_access()``) so that only a calling process with the same +permissions as the target process, or with the necessary capabilities, can +manipulate the target process. + +Finally, be aware that some non-x86 architectures have an easier time if +system call parameters that are explicitly 64-bit fall on odd-numbered +arguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bit +registers. (This concern does not apply if the arguments are part of a +structure that's passed in by pointer.) + + +Proposing the API +----------------- + +To make new system calls easy to review, it's best to divide up the patchset +into separate chunks. These should include at least the following items as +distinct commits (each of which is described further below): + + - The core implementation of the system call, together with prototypes, + generic numbering, Kconfig changes and fallback stub implementation. + - Wiring up of the new system call for one particular architecture, usually + x86 (including all of x86_64, x86_32 and x32). + - A demonstration of the use of the new system call in userspace via a + selftest in ``tools/testing/selftests/``. + - A draft man-page for the new system call, either as plain text in the + cover letter, or as a patch to the (separate) man-pages repository. + +New system call proposals, like any change to the kernel's API, should always +be cc'ed to linux-api@vger.kernel.org. + + +Generic System Call Implementation +---------------------------------- + +The main entry point for your new :manpage:`xyzzy(2)` system call will be called +``sys_xyzzy()``, but you add this entry point with the appropriate +``SYSCALL_DEFINEn()`` macro rather than explicitly. The 'n' indicates the +number of arguments to the system call, and the macro takes the system call name +followed by the (type, name) pairs for the parameters as arguments. Using +this macro allows metadata about the new system call to be made available for +other tools. + +The new entry point also needs a corresponding function prototype, in +``include/linux/syscalls.h``, marked as asmlinkage to match the way that system +calls are invoked:: + + asmlinkage long sys_xyzzy(...); + +Some architectures (e.g. x86) have their own architecture-specific syscall +tables, but several other architectures share a generic syscall table. Add your +new system call to the generic list by adding an entry to the list in +``include/uapi/asm-generic/unistd.h``:: + + #define __NR_xyzzy 292 + __SYSCALL(__NR_xyzzy, sys_xyzzy) + +Also update the __NR_syscalls count to reflect the additional system call, and +note that if multiple new system calls are added in the same merge window, +your new syscall number may get adjusted to resolve conflicts. + +The file ``kernel/sys_ni.c`` provides a fallback stub implementation of each +system call, returning ``-ENOSYS``. Add your new system call here too:: + + COND_SYSCALL(xyzzy); + +Your new kernel functionality, and the system call that controls it, should +normally be optional, so add a ``CONFIG`` option (typically to +``init/Kconfig``) for it. As usual for new ``CONFIG`` options: + + - Include a description of the new functionality and system call controlled + by the option. + - Make the option depend on EXPERT if it should be hidden from normal users. + - Make any new source files implementing the function dependent on the CONFIG + option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c``). + - Double check that the kernel still builds with the new CONFIG option turned + off. + +To summarize, you need a commit that includes: + + - ``CONFIG`` option for the new function, normally in ``init/Kconfig`` + - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point + - corresponding prototype in ``include/linux/syscalls.h`` + - generic table entry in ``include/uapi/asm-generic/unistd.h`` + - fallback stub in ``kernel/sys_ni.c`` + + +x86 System Call Implementation +------------------------------ + +To wire up your new system call for x86 platforms, you need to update the +master syscall tables. Assuming your new system call isn't special in some +way (see below), this involves a "common" entry (for x86_64 and x32) in +arch/x86/entry/syscalls/syscall_64.tbl:: + + 333 common xyzzy sys_xyzzy + +and an "i386" entry in ``arch/x86/entry/syscalls/syscall_32.tbl``:: + + 380 i386 xyzzy sys_xyzzy + +Again, these numbers are liable to be changed if there are conflicts in the +relevant merge window. + + +Compatibility System Calls (Generic) +------------------------------------ + +For most system calls the same 64-bit implementation can be invoked even when +the userspace program is itself 32-bit; even if the system call's parameters +include an explicit pointer, this is handled transparently. + +However, there are a couple of situations where a compatibility layer is +needed to cope with size differences between 32-bit and 64-bit. + +The first is if the 64-bit kernel also supports 32-bit userspace programs, and +so needs to parse areas of (``__user``) memory that could hold either 32-bit or +64-bit values. In particular, this is needed whenever a system call argument +is: + + - a pointer to a pointer + - a pointer to a struct containing a pointer (e.g. ``struct iovec __user *``) + - a pointer to a varying sized integral type (``time_t``, ``off_t``, + ``long``, ...) + - a pointer to a struct containing a varying sized integral type. + +The second situation that requires a compatibility layer is if one of the +system call's arguments has a type that is explicitly 64-bit even on a 32-bit +architecture, for example ``loff_t`` or ``__u64``. In this case, a value that +arrives at a 64-bit kernel from a 32-bit application will be split into two +32-bit values, which then need to be re-assembled in the compatibility layer. + +(Note that a system call argument that's a pointer to an explicit 64-bit type +does **not** need a compatibility layer; for example, :manpage:`splice(2)`'s arguments of +type ``loff_t __user *`` do not trigger the need for a ``compat_`` system call.) + +The compatibility version of the system call is called ``compat_sys_xyzzy()``, +and is added with the ``COMPAT_SYSCALL_DEFINEn()`` macro, analogously to +SYSCALL_DEFINEn. This version of the implementation runs as part of a 64-bit +kernel, but expects to receive 32-bit parameter values and does whatever is +needed to deal with them. (Typically, the ``compat_sys_`` version converts the +values to 64-bit versions and either calls on to the ``sys_`` version, or both of +them call a common inner implementation function.) + +The compat entry point also needs a corresponding function prototype, in +``include/linux/compat.h``, marked as asmlinkage to match the way that system +calls are invoked:: + + asmlinkage long compat_sys_xyzzy(...); + +If the system call involves a structure that is laid out differently on 32-bit +and 64-bit systems, say ``struct xyzzy_args``, then the include/linux/compat.h +header file should also include a compat version of the structure (``struct +compat_xyzzy_args``) where each variable-size field has the appropriate +``compat_`` type that corresponds to the type in ``struct xyzzy_args``. The +``compat_sys_xyzzy()`` routine can then use this ``compat_`` structure to +parse the arguments from a 32-bit invocation. + +For example, if there are fields:: + + struct xyzzy_args { + const char __user *ptr; + __kernel_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +in struct xyzzy_args, then struct compat_xyzzy_args would have:: + + struct compat_xyzzy_args { + compat_uptr_t ptr; + compat_long_t varying_val; + u64 fixed_val; + /* ... */ + }; + +The generic system call list also needs adjusting to allow for the compat +version; the entry in ``include/uapi/asm-generic/unistd.h`` should use +``__SC_COMP`` rather than ``__SYSCALL``:: + + #define __NR_xyzzy 292 + __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy) + +To summarize, you need: + + - a ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point + - corresponding prototype in ``include/linux/compat.h`` + - (if needed) 32-bit mapping struct in ``include/linux/compat.h`` + - instance of ``__SC_COMP`` not ``__SYSCALL`` in + ``include/uapi/asm-generic/unistd.h`` + + +Compatibility System Calls (x86) +-------------------------------- + +To wire up the x86 architecture of a system call with a compatibility version, +the entries in the syscall tables need to be adjusted. + +First, the entry in ``arch/x86/entry/syscalls/syscall_32.tbl`` gets an extra +column to indicate that a 32-bit userspace program running on a 64-bit kernel +should hit the compat entry point:: + + 380 i386 xyzzy sys_xyzzy __ia32_compat_sys_xyzzy + +Second, you need to figure out what should happen for the x32 ABI version of +the new system call. There's a choice here: the layout of the arguments +should either match the 64-bit version or the 32-bit version. + +If there's a pointer-to-a-pointer involved, the decision is easy: x32 is +ILP32, so the layout should match the 32-bit version, and the entry in +``arch/x86/entry/syscalls/syscall_64.tbl`` is split so that x32 programs hit +the compatibility wrapper:: + + 333 64 xyzzy sys_xyzzy + ... + 555 x32 xyzzy __x32_compat_sys_xyzzy + +If no pointers are involved, then it is preferable to re-use the 64-bit system +call for the x32 ABI (and consequently the entry in +arch/x86/entry/syscalls/syscall_64.tbl is unchanged). + +In either case, you should check that the types involved in your argument +layout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or +64-bit (-m64) equivalents. + + +System Calls Returning Elsewhere +-------------------------------- + +For most system calls, once the system call is complete the user program +continues exactly where it left off -- at the next instruction, with the +stack the same and most of the registers the same as before the system call, +and with the same virtual memory space. + +However, a few system calls do things differently. They might return to a +different location (``rt_sigreturn``) or change the memory space +(``fork``/``vfork``/``clone``) or even architecture (``execve``/``execveat``) +of the program. + +To allow for this, the kernel implementation of the system call may need to +save and restore additional registers to the kernel stack, allowing complete +control of where and how execution continues after the system call. + +This is arch-specific, but typically involves defining assembly entry points +that save/restore additional registers and invoke the real system call entry +point. + +For x86_64, this is implemented as a ``stub_xyzzy`` entry point in +``arch/x86/entry/entry_64.S``, and the entry in the syscall table +(``arch/x86/entry/syscalls/syscall_64.tbl``) is adjusted to match:: + + 333 common xyzzy stub_xyzzy + +The equivalent for 32-bit programs running on a 64-bit kernel is normally +called ``stub32_xyzzy`` and implemented in ``arch/x86/entry/entry_64_compat.S``, +with the corresponding syscall table adjustment in +``arch/x86/entry/syscalls/syscall_32.tbl``:: + + 380 i386 xyzzy sys_xyzzy stub32_xyzzy + +If the system call needs a compatibility layer (as in the previous section) +then the ``stub32_`` version needs to call on to the ``compat_sys_`` version +of the system call rather than the native 64-bit version. Also, if the x32 ABI +implementation is not common with the x86_64 version, then its syscall +table will also need to invoke a stub that calls on to the ``compat_sys_`` +version. + +For completeness, it's also nice to set up a mapping so that user-mode Linux +still works -- its syscall table will reference stub_xyzzy, but the UML build +doesn't include ``arch/x86/entry/entry_64.S`` implementation (because UML +simulates registers etc). Fixing this is as simple as adding a #define to +``arch/x86/um/sys_call_table_64.c``:: + + #define stub_xyzzy sys_xyzzy + + +Other Details +------------- + +Most of the kernel treats system calls in a generic way, but there is the +occasional exception that may need updating for your particular system call. + +The audit subsystem is one such special case; it includes (arch-specific) +functions that classify some special types of system call -- specifically +file open (``open``/``openat``), program execution (``execve``/``exeveat``) or +socket multiplexor (``socketcall``) operations. If your new system call is +analogous to one of these, then the audit system should be updated. + +More generally, if there is an existing system call that is analogous to your +new system call, it's worth doing a kernel-wide grep for the existing system +call to check there are no other special cases. + + +Testing +------- + +A new system call should obviously be tested; it is also useful to provide +reviewers with a demonstration of how user space programs will use the system +call. A good way to combine these aims is to include a simple self-test +program in a new directory under ``tools/testing/selftests/``. + +For a new system call, there will obviously be no libc wrapper function and so +the test will need to invoke it using ``syscall()``; also, if the system call +involves a new userspace-visible structure, the corresponding header will need +to be installed to compile the test. + +Make sure the selftest runs successfully on all supported architectures. For +example, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32) +and x32 (-mx32) ABI program. + +For more extensive and thorough testing of new functionality, you should also +consider adding tests to the Linux Test Project, or to the xfstests project +for filesystem-related changes. + + - https://linux-test-project.github.io/ + - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git + + +Man Page +-------- + +All new system calls should come with a complete man page, ideally using groff +markup, but plain text will do. If groff is used, it's helpful to include a +pre-rendered ASCII version of the man page in the cover email for the +patchset, for the convenience of reviewers. + +The man page should be cc'ed to linux-man@vger.kernel.org +For more details, see https://www.kernel.org/doc/man-pages/patches.html + + +Do not call System Calls in the Kernel +-------------------------------------- + +System calls are, as stated above, interaction points between userspace and +the kernel. Therefore, system call functions such as ``sys_xyzzy()`` or +``compat_sys_xyzzy()`` should only be called from userspace via the syscall +table, but not from elsewhere in the kernel. If the syscall functionality is +useful to be used within the kernel, needs to be shared between an old and a +new syscall, or needs to be shared between a syscall and its compatibility +variant, it should be implemented by means of a "helper" function (such as +``kern_xyzzy()``). This kernel function may then be called within the +syscall stub (``sys_xyzzy()``), the compatibility syscall stub +(``compat_sys_xyzzy()``), and/or other kernel code. + +At least on 64-bit x86, it will be a hard requirement from v4.17 onwards to not +call system call functions in the kernel. It uses a different calling +convention for system calls where ``struct pt_regs`` is decoded on-the-fly in a +syscall wrapper which then hands processing over to the actual syscall function. +This means that only those parameters which are actually needed for a specific +syscall are passed on during syscall entry, instead of filling in six CPU +registers with random user space content all the time (which may cause serious +trouble down the call chain). + +Moreover, rules on how data may be accessed may differ between kernel data and +user data. This is another reason why calling ``sys_xyzzy()`` is generally a +bad idea. + +Exceptions to this rule are only allowed in architecture-specific overrides, +architecture-specific compatibility wrappers, or other code in arch/. + + +References and Sources +---------------------- + + - LWN article from Michael Kerrisk on use of flags argument in system calls: + https://lwn.net/Articles/585415/ + - LWN article from Michael Kerrisk on how to handle unknown flags in a system + call: https://lwn.net/Articles/588444/ + - LWN article from Jake Edge describing constraints on 64-bit system call + arguments: https://lwn.net/Articles/311630/ + - Pair of LWN articles from David Drysdale that describe the system call + implementation paths in detail for v3.14: + + - https://lwn.net/Articles/604287/ + - https://lwn.net/Articles/604515/ + + - Architecture-specific requirements for system calls are discussed in the + :manpage:`syscall(2)` man-page: + http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES + - Collated emails from Linus Torvalds discussing the problems with ``ioctl()``: + http://yarchive.net/comp/linux/ioctl.html + - "How to not invent kernel interfaces", Arnd Bergmann, + http://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf + - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN: + https://lwn.net/Articles/486306/ + - Recommendation from Andrew Morton that all related information for a new + system call should come in the same email thread: + https://lkml.org/lkml/2014/7/24/641 + - Recommendation from Michael Kerrisk that a new system call should come with + a man page: https://lkml.org/lkml/2014/6/13/309 + - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate + commit: https://lkml.org/lkml/2014/11/19/254 + - Suggestion from Greg Kroah-Hartman that it's good for new system calls to + come with a man-page & selftest: https://lkml.org/lkml/2014/3/19/710 + - Discussion from Michael Kerrisk of new system call vs. :manpage:`prctl(2)` extension: + https://lkml.org/lkml/2014/6/3/411 + - Suggestion from Ingo Molnar that system calls that involve multiple + arguments should encapsulate those arguments in a struct, which includes a + size field for future extensibility: https://lkml.org/lkml/2015/7/30/117 + - Numbering oddities arising from (re-)use of O_* numbering space flags: + + - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness + check") + - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc + conflict") + - commit bb458c644a59 ("Safer ABI for O_TMPFILE") + + - Discussion from Matthew Wilcox about restrictions on 64-bit arguments: + https://lkml.org/lkml/2008/12/12/187 + - Recommendation from Greg Kroah-Hartman that unknown flags should be + policed: https://lkml.org/lkml/2014/7/17/577 + - Recommendation from Linus Torvalds that x32 system calls should prefer + compatibility with 64-bit versions rather than 32-bit versions: + https://lkml.org/lkml/2011/8/31/244 -- cgit v1.2.3