From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- Documentation/process/changes.rst | 487 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 487 insertions(+) create mode 100644 Documentation/process/changes.rst (limited to 'Documentation/process/changes.rst') diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst new file mode 100644 index 000000000..d1bf143b4 --- /dev/null +++ b/Documentation/process/changes.rst @@ -0,0 +1,487 @@ +.. _changes: + +Minimal requirements to compile the Kernel +++++++++++++++++++++++++++++++++++++++++++ + +Intro +===== + +This document is designed to provide a list of the minimum levels of +software necessary to run the 4.x kernels. + +This document is originally based on my "Changes" file for 2.0.x kernels +and therefore owes credit to the same people as that file (Jared Mauch, +Axel Boldt, Alessandro Sigala, and countless other users all over the +'net). + +Current Minimal Requirements +**************************** + +Upgrade to at **least** these software revisions before thinking you've +encountered a bug! If you're unsure what version you're currently +running, the suggested command should tell you. + +Again, keep in mind that this list assumes you are already functionally +running a Linux kernel. Also, not all tools are necessary on all +systems; obviously, if you don't have any ISDN hardware, for example, +you probably needn't concern yourself with isdn4k-utils. + +====================== =============== ======================================== + Program Minimal version Command to check the version +====================== =============== ======================================== +GNU C 4.6 gcc --version +GNU make 3.81 make --version +binutils 2.20 ld -v +flex 2.5.35 flex --version +bison 2.0 bison --version +util-linux 2.10o fdformat --version +kmod 13 depmod -V +e2fsprogs 1.41.4 e2fsck -V +jfsutils 1.1.3 fsck.jfs -V +reiserfsprogs 3.6.3 reiserfsck -V +xfsprogs 2.6.0 xfs_db -V +squashfs-tools 4.0 mksquashfs -version +btrfs-progs 0.18 btrfsck +pcmciautils 004 pccardctl -V +quota-tools 3.09 quota -V +PPP 2.4.0 pppd --version +isdn4k-utils 3.1pre1 isdnctrl 2>&1|grep version +nfs-utils 1.0.5 showmount --version +procps 3.2.0 ps --version +oprofile 0.9 oprofiled --version +udev 081 udevd --version +grub 0.93 grub --version || grub-install --version +mcelog 0.6 mcelog --version +iptables 1.4.2 iptables -V +openssl & libcrypto 1.0.0 openssl version +bc 1.06.95 bc --version +Sphinx\ [#f1]_ 1.3 sphinx-build --version +====================== =============== ======================================== + +.. [#f1] Sphinx is needed only to build the Kernel documentation + +Kernel compilation +****************** + +GCC +--- + +The gcc version requirements may vary depending on the type of CPU in your +computer. + +Make +---- + +You will need GNU make 3.81 or later to build the kernel. + +Binutils +-------- + +The build system has, as of 4.13, switched to using thin archives (`ar T`) +rather than incremental linking (`ld -r`) for built-in.a intermediate steps. +This requires binutils 2.20 or newer. + +pkg-config +---------- + +The build system, as of 4.18, requires pkg-config to check for installed +kconfig tools and to determine flags settings for use in +'make {g,x}config'. Previously pkg-config was being used but not +verified or documented. + +Flex +---- + +Since Linux 4.16, the build system generates lexical analyzers +during build. This requires flex 2.5.35 or later. + + +Bison +----- + +Since Linux 4.16, the build system generates parsers +during build. This requires bison 2.0 or later. + +Perl +---- + +You will need perl 5 and the following modules: ``Getopt::Long``, +``Getopt::Std``, ``File::Basename``, and ``File::Find`` to build the kernel. + +BC +-- + +You will need bc to build kernels 3.10 and higher + + +OpenSSL +------- + +Module signing and external certificate handling use the OpenSSL program and +crypto library to do key creation and signature generation. + +You will need openssl to build kernels 3.7 and higher if module signing is +enabled. You will also need openssl development packages to build kernels 4.3 +and higher. + + +System utilities +**************** + +Architectural changes +--------------------- + +DevFS has been obsoleted in favour of udev +(http://www.kernel.org/pub/linux/utils/kernel/hotplug/) + +32-bit UID support is now in place. Have fun! + +Linux documentation for functions is transitioning to inline +documentation via specially-formatted comments near their +definitions in the source. These comments can be combined with ReST +files the Documentation/ directory to make enriched documentation, which can +then be converted to PostScript, HTML, LaTex, ePUB and PDF files. +In order to convert from ReST format to a format of your choice, you'll need +Sphinx. + +Util-linux +---------- + +New versions of util-linux provide ``fdisk`` support for larger disks, +support new options to mount, recognize more supported partition +types, have a fdformat which works with 2.4 kernels, and similar goodies. +You'll probably want to upgrade. + +Ksymoops +-------- + +If the unthinkable happens and your kernel oopses, you may need the +ksymoops tool to decode it, but in most cases you don't. +It is generally preferred to build the kernel with ``CONFIG_KALLSYMS`` so +that it produces readable dumps that can be used as-is (this also +produces better output than ksymoops). If for some reason your kernel +is not build with ``CONFIG_KALLSYMS`` and you have no way to rebuild and +reproduce the Oops with that option, then you can still decode that Oops +with ksymoops. + +Mkinitrd +-------- + +These changes to the ``/lib/modules`` file tree layout also require that +mkinitrd be upgraded. + +E2fsprogs +--------- + +The latest version of ``e2fsprogs`` fixes several bugs in fsck and +debugfs. Obviously, it's a good idea to upgrade. + +JFSutils +-------- + +The ``jfsutils`` package contains the utilities for the file system. +The following utilities are available: + +- ``fsck.jfs`` - initiate replay of the transaction log, and check + and repair a JFS formatted partition. + +- ``mkfs.jfs`` - create a JFS formatted partition. + +- other file system utilities are also available in this package. + +Reiserfsprogs +------------- + +The reiserfsprogs package should be used for reiserfs-3.6.x +(Linux kernels 2.4.x). It is a combined package and contains working +versions of ``mkreiserfs``, ``resize_reiserfs``, ``debugreiserfs`` and +``reiserfsck``. These utils work on both i386 and alpha platforms. + +Xfsprogs +-------- + +The latest version of ``xfsprogs`` contains ``mkfs.xfs``, ``xfs_db``, and the +``xfs_repair`` utilities, among others, for the XFS filesystem. It is +architecture independent and any version from 2.0.0 onward should +work correctly with this version of the XFS kernel code (2.6.0 or +later is recommended, due to some significant improvements). + +PCMCIAutils +----------- + +PCMCIAutils replaces ``pcmcia-cs``. It properly sets up +PCMCIA sockets at system startup and loads the appropriate modules +for 16-bit PCMCIA devices if the kernel is modularized and the hotplug +subsystem is used. + +Quota-tools +----------- + +Support for 32 bit uid's and gid's is required if you want to use +the newer version 2 quota format. Quota-tools version 3.07 and +newer has this support. Use the recommended version or newer +from the table above. + +Intel IA32 microcode +-------------------- + +A driver has been added to allow updating of Intel IA32 microcode, +accessible as a normal (misc) character device. If you are not using +udev you may need to:: + + mkdir /dev/cpu + mknod /dev/cpu/microcode c 10 184 + chmod 0644 /dev/cpu/microcode + +as root before you can use this. You'll probably also want to +get the user-space microcode_ctl utility to use with this. + +udev +---- + +``udev`` is a userspace application for populating ``/dev`` dynamically with +only entries for devices actually present. ``udev`` replaces the basic +functionality of devfs, while allowing persistent device naming for +devices. + +FUSE +---- + +Needs libfuse 2.4.0 or later. Absolute minimum is 2.3.0 but mount +options ``direct_io`` and ``kernel_cache`` won't work. + +Networking +********** + +General changes +--------------- + +If you have advanced network configuration needs, you should probably +consider using the network tools from ip-route2. + +Packet Filter / NAT +------------------- +The packet filtering and NAT code uses the same tools like the previous 2.4.x +kernel series (iptables). It still includes backwards-compatibility modules +for 2.2.x-style ipchains and 2.0.x-style ipfwadm. + +PPP +--- + +The PPP driver has been restructured to support multilink and to +enable it to operate over diverse media layers. If you use PPP, +upgrade pppd to at least 2.4.0. + +If you are not using udev, you must have the device file /dev/ppp +which can be made by:: + + mknod /dev/ppp c 108 0 + +as root. + +Isdn4k-utils +------------ + +Due to changes in the length of the phone number field, isdn4k-utils +needs to be recompiled or (preferably) upgraded. + +NFS-utils +--------- + +In ancient (2.4 and earlier) kernels, the nfs server needed to know +about any client that expected to be able to access files via NFS. This +information would be given to the kernel by ``mountd`` when the client +mounted the filesystem, or by ``exportfs`` at system startup. exportfs +would take information about active clients from ``/var/lib/nfs/rmtab``. + +This approach is quite fragile as it depends on rmtab being correct +which is not always easy, particularly when trying to implement +fail-over. Even when the system is working well, ``rmtab`` suffers from +getting lots of old entries that never get removed. + +With modern kernels we have the option of having the kernel tell mountd +when it gets a request from an unknown host, and mountd can give +appropriate export information to the kernel. This removes the +dependency on ``rmtab`` and means that the kernel only needs to know about +currently active clients. + +To enable this new functionality, you need to:: + + mount -t nfsd nfsd /proc/fs/nfsd + +before running exportfs or mountd. It is recommended that all NFS +services be protected from the internet-at-large by a firewall where +that is possible. + +mcelog +------ + +On x86 kernels the mcelog utility is needed to process and log machine check +events when ``CONFIG_X86_MCE`` is enabled. Machine check events are errors +reported by the CPU. Processing them is strongly encouraged. + +Kernel documentation +******************** + +Sphinx +------ + +Please see :ref:`sphinx_install` in ``Documentation/doc-guide/sphinx.rst`` +for details about Sphinx requirements. + +Getting updated software +======================== + +Kernel compilation +****************** + +gcc +--- + +- + +Make +---- + +- + +Binutils +-------- + +- + +Flex +---- + +- + +Bison +----- + +- + +OpenSSL +------- + +- + +System utilities +**************** + +Util-linux +---------- + +- + +Kmod +---- + +- +- + +Ksymoops +-------- + +- + +Mkinitrd +-------- + +- + +E2fsprogs +--------- + +- + +JFSutils +-------- + +- + +Reiserfsprogs +------------- + +- + +Xfsprogs +-------- + +- + +Pcmciautils +----------- + +- + +Quota-tools +----------- + +- + + +Intel P6 microcode +------------------ + +- + +udev +---- + +- + +FUSE +---- + +- + +mcelog +------ + +- + +Networking +********** + +PPP +--- + +- + +Isdn4k-utils +------------ + +- + +NFS-utils +--------- + +- + +Iptables +-------- + +- + +Ip-route2 +--------- + +- + +OProfile +-------- + +- + +NFS-Utils +--------- + +- + +Kernel documentation +******************** + +Sphinx +------ + +- -- cgit v1.2.3