From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/bcm-cygnus.dtsi | 619 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 619 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi (limited to 'arch/arm/boot/dts/bcm-cygnus.dtsi') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi new file mode 100644 index 000000000..56f43a9f6 --- /dev/null +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -0,0 +1,619 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2014 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,cygnus"; + model = "Broadcom Cygnus SoC"; + interrupt-parent = <&gic>; + + aliases { + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + /include/ "bcm-cygnus-clock.dtsi" + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = ; + }; + + core { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + + axi { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + otp: otp@301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + status = "disabled"; + }; + + pcie_phy: phy@301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + pcie0_phy: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + pinctrl: pinctrl@301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; + + spi_0: spi_0 { + function = "spi0"; + groups = "spi0_grp"; + }; + + spi_1: spi_1 { + function = "spi1"; + groups = "spi1_grp"; + }; + + spi_2: spi_2 { + function = "spi2"; + groups = "spi2_grp"; + }; + }; + + mailbox: mailbox@3024024 { + compatible = "brcm,iproc-mailbox"; + reg = <0x03024024 0x40>; + interrupts = ; + #interrupt-cells = <1>; + interrupt-controller; + #mbox-cells = <1>; + }; + + gpio_crmu: gpio@3024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + ngpios = <6>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + interrupt-parent = <&mailbox>; + interrupts = <0>; + }; + + mdio: mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <0>; + #address-cells = <1>; + status = "disabled"; + + gphy0: ethernet-phy@0 { + reg = <0>; + }; + + gphy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + switch: switch@18007000 { + compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab"; + reg = <0x18007000 0x1000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + }; + + port@1 { + reg = <1>; + phy-handle = <&gphy1>; + phy-mode = "rgmii"; + }; + + port@8 { + reg = <8>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; + + wdt0: wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = ; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; + + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + ngpios = <24>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; + }; + + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + + status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + + phys = <&pcie1_phy>; + phy-names = "pcie-phy"; + + status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi-controller { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + }; + + dma0: dma@18018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x18018000 0x1000>; + interrupts = , + , + , + , + , + , + , + , + ; + clocks = <&apb_clk>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18022000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; + + spi0: spi@18028000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18028000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + pinctrl-0 = <&spi_0>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + spi1: spi@18029000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x18029000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + pinctrl-0 = <&spi_1>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + spi2: spi@1802a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x1802a000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + pinctrl-0 = <&spi_2>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + rng: rng@18032000 { + compatible = "brcm,iproc-rng200"; + reg = <0x18032000 0x28>; + }; + + sdhci0: sdhci@18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = ; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + + eth0: ethernet@18042000 { + compatible = "brcm,amac"; + reg = <0x18042000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = ; + status = "disabled"; + }; + + sdhci1: sdhci@18043000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18043000 0x100>; + interrupts = ; + clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + status = "disabled"; + }; + + nand_controller: nand-controller@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, + <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = ; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + + ehci0: usb@18048000 { + compatible = "generic-ehci"; + reg = <0x18048000 0x100>; + interrupts = ; + status = "disabled"; + }; + + ohci0: usb@18048800 { + compatible = "generic-ohci"; + reg = <0x18048800 0x100>; + interrupts = ; + status = "disabled"; + }; + + clcd: clcd@180a0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x180a0000 0x1000>; + interrupts = ; + interrupt-names = "combined"; + clocks = <&axi41_clk>, <&apb_clk>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + + v3d: v3d@180a2000 { + compatible = "brcm,cygnus-v3d"; + reg = <0x180a2000 0x1000>; + clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>; + clock-names = "v3d_clk"; + interrupts = ; + status = "disabled"; + }; + + vc4: gpu { + compatible = "brcm,cygnus-vc4"; + }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + ngpios = <146>; + #gpio-cells = <2>; + gpio-controller; + + interrupt-controller; + interrupts = ; + gpio-ranges = <&pinctrl 0 42 1>, + <&pinctrl 1 44 3>, + <&pinctrl 4 48 1>, + <&pinctrl 5 50 3>, + <&pinctrl 8 126 1>, + <&pinctrl 9 155 1>, + <&pinctrl 10 152 1>, + <&pinctrl 11 154 1>, + <&pinctrl 12 153 1>, + <&pinctrl 13 127 3>, + <&pinctrl 16 140 1>, + <&pinctrl 17 145 7>, + <&pinctrl 24 130 10>, + <&pinctrl 34 141 4>, + <&pinctrl 38 54 1>, + <&pinctrl 39 56 3>, + <&pinctrl 42 60 3>, + <&pinctrl 45 64 3>, + <&pinctrl 48 68 2>, + <&pinctrl 50 84 6>, + <&pinctrl 56 94 6>, + <&pinctrl 62 72 1>, + <&pinctrl 63 70 1>, + <&pinctrl 64 80 1>, + <&pinctrl 65 74 3>, + <&pinctrl 68 78 1>, + <&pinctrl 69 82 1>, + <&pinctrl 70 156 17>, + <&pinctrl 87 104 12>, + <&pinctrl 99 102 2>, + <&pinctrl 101 90 4>, + <&pinctrl 105 116 6>, + <&pinctrl 111 100 2>, + <&pinctrl 113 122 4>, + <&pinctrl 123 11 1>, + <&pinctrl 124 38 4>, + <&pinctrl 128 43 1>, + <&pinctrl 129 47 1>, + <&pinctrl 130 49 1>, + <&pinctrl 131 53 1>, + <&pinctrl 132 55 1>, + <&pinctrl 133 59 1>, + <&pinctrl 134 63 1>, + <&pinctrl 135 67 1>, + <&pinctrl 136 71 1>, + <&pinctrl 137 73 1>, + <&pinctrl 138 77 1>, + <&pinctrl 139 79 1>, + <&pinctrl 140 81 1>, + <&pinctrl 141 83 1>, + <&pinctrl 142 10 1>; + }; + + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon", "syscon"; + reg = <0x180a6000 0xc30>; + }; + + touchscreen: touchscreen@180a6000 { + compatible = "brcm,iproc-touchscreen"; + #address-cells = <1>; + #size-cells = <1>; + ts_syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = ; + status = "disabled"; + }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + #io-channel-cells = <1>; + io-channel-ranges; + adc-syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = ; + status = "disabled"; + }; + + pwm: pwm@180aa500 { + compatible = "brcm,kona-pwm"; + reg = <0x180aa500 0xc4>; + #pwm-cells = <3>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; + status = "disabled"; + }; + + keypad: keypad@180ac000 { + compatible = "brcm,bcm-keypad"; + reg = <0x180ac000 0x14c>; + interrupts = ; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>; + clock-names = "peri_clk"; + clock-frequency = <31250>; + pull-up-enabled; + col-debounce-filter-period = <0>; + status-debounce-filter-period = <0>; + row-output-enabled; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3