From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- arch/arm/boot/dts/lpc18xx.dtsi | 537 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 537 insertions(+) create mode 100644 arch/arm/boot/dts/lpc18xx.dtsi (limited to 'arch/arm/boot/dts/lpc18xx.dtsi') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi new file mode 100644 index 000000000..10b8249b8 --- /dev/null +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -0,0 +1,537 @@ +/* + * Common base for NXP LPC18xx and LPC43xx devices. + * + * Copyright 2015 Joachim Eastwood + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +#include "armv7-m.dtsi" + +#include "dt-bindings/clock/lpc18xx-cgu.h" +#include "dt-bindings/clock/lpc18xx-ccu.h" + +#define LPC_PIN(port, pin) (0x##port * 32 + pin) +#define LPC_GPIO(port, pin) (port * 32 + pin) + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-m3"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&ccu1 CLK_CPU_CORE>; + }; + }; + + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; + }; + }; + + soc { + sct_pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + resets = <&rgu 37>; + #pwm-cells = <3>; + status = "disabled"; + }; + + dmac: dma-controller@40002000 { + compatible = "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x40002000 0x1000>; + interrupts = <2>; + clocks = <&ccu1 CLK_CPU_DMA>; + clock-names = "apb_pclk"; + resets = <&rgu 19>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + }; + + spifi: flash-controller@40003000 { + compatible = "nxp,lpc1773-spifi"; + reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; + reg-names = "spifi", "flash"; + interrupts = <30>; + clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; + clock-names = "spifi", "reg"; + resets = <&rgu 53>; + status = "disabled"; + }; + + mmcsd: mmcsd@40004000 { + compatible = "snps,dw-mshc"; + reg = <0x40004000 0x1000>; + interrupts = <6>; + clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; + clock-names = "ciu", "biu"; + resets = <&rgu 20>; + status = "disabled"; + }; + + usb0: ehci@40006100 { + compatible = "nxp,lpc1850-ehci", "generic-ehci"; + reg = <0x40006100 0x100>; + interrupts = <8>; + clocks = <&ccu1 CLK_CPU_USB0>; + resets = <&rgu 17>; + phys = <&usb0_otg_phy>; + phy-names = "usb"; + has-transaction-translator; + status = "disabled"; + }; + + usb1: ehci@40007100 { + compatible = "nxp,lpc1850-ehci", "generic-ehci"; + reg = <0x40007100 0x100>; + interrupts = <9>; + clocks = <&ccu1 CLK_CPU_USB1>; + resets = <&rgu 18>; + status = "disabled"; + }; + + emc: memory-controller@40005000 { + compatible = "arm,pl172", "arm,primecell"; + reg = <0x40005000 0x1000>; + clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; + clock-names = "mpmcclk", "apb_pclk"; + resets = <&rgu 21>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x1c000000 0x1000000 + 1 0 0x1d000000 0x1000000 + 2 0 0x1e000000 0x1000000 + 3 0 0x1f000000 0x1000000>; + status = "disabled"; + }; + + lcdc: lcd-controller@40008000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x40008000 0x1000>; + interrupts = <7>; + interrupt-names = "combined"; + clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; + clock-names = "clcdclk", "apb_pclk"; + resets = <&rgu 16>; + status = "disabled"; + }; + + eeprom: eeprom@4000e000 { + compatible = "nxp,lpc1857-eeprom"; + reg = <0x4000e000 0x1000>, <0x20040000 0x4000>; + reg-names = "reg", "mem"; + clocks = <&ccu1 CLK_CPU_EEPROM>; + clock-names = "eeprom"; + resets = <&rgu 27>; + interrupts = <4>; + status = "disabled"; + }; + + mac: ethernet@40010000 { + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; + reg = <0x40010000 0x2000>; + interrupts = <5>; + interrupt-names = "macirq"; + clocks = <&ccu1 CLK_CPU_ETHERNET>; + clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; + rx-fifo-depth = <256>; + tx-fifo-depth = <256>; + snps,pbl = <4>; /* 32 (8x mode) */ + snps,force_thresh_dma_mode; + status = "disabled"; + }; + + creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + clocks = <&ccu1 CLK_CPU_CREG>; + resets = <&rgu 5>; + + creg_clk: clock-controller { + compatible = "nxp,lpc1850-creg-clk"; + clocks = <&xtal32>; + #clock-cells = <1>; + }; + + usb0_otg_phy: phy { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; + + dmamux: dma-mux { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; + }; + }; + + rtc: rtc@40046000 { + compatible = "nxp,lpc1850-rtc", "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + interrupts = <47>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; + }; + + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + + rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + + watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + interrupts = <49>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + }; + + uart0: serial@40081000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; + resets = <&rgu 44>; + dmas = <&dmamux 1 1 2 + &dmamux 2 1 2 + &dmamux 11 2 2 + &dmamux 12 2 2>; + dma-names = "tx", "rx", "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@40082000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40082000 0x1000>; + reg-shift = <2>; + interrupts = <25>; + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; + clock-names = "uartclk", "reg"; + resets = <&rgu 45>; + dmas = <&dmamux 3 1 2 + &dmamux 4 1 2>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + ssp0: spi@40083000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x40083000 0x1000>; + interrupts = <22>; + clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; + clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 50>; + dmas = <&dmamux 9 0 2 + &dmamux 10 0 2>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + timer0: timer@40084000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40084000 0x1000>; + interrupts = <12>; + clocks = <&ccu1 CLK_CPU_TIMER0>; + clock-names = "timerclk"; + resets = <&rgu 32>; + }; + + timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&ccu1 CLK_CPU_TIMER1>; + clock-names = "timerclk"; + resets = <&rgu 33>; + }; + + pinctrl: pinctrl@40086000 { + compatible = "nxp,lpc1850-scu"; + reg = <0x40086000 0x1000>; + clocks = <&ccu1 CLK_CPU_SCU>; + }; + + i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + resets = <&rgu 48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can1: can@400a4000 { + compatible = "bosch,c_can"; + reg = <0x400a4000 0x1000>; + interrupts = <43>; + clocks = <&ccu1 CLK_APB1_CAN1>; + resets = <&rgu 54>; + status = "disabled"; + }; + + uart2: serial@400c1000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x400c1000 0x1000>; + reg-shift = <2>; + interrupts = <26>; + clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; + clock-names = "uartclk", "reg"; + resets = <&rgu 46>; + dmas = <&dmamux 5 1 2 + &dmamux 6 1 2>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@400c2000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x400c2000 0x1000>; + reg-shift = <2>; + interrupts = <27>; + clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; + clock-names = "uartclk", "reg"; + resets = <&rgu 47>; + dmas = <&dmamux 7 1 2 + &dmamux 8 1 2 + &dmamux 13 3 2 + &dmamux 14 3 2>; + dma-names = "tx", "rx", "rx", "tx"; + status = "disabled"; + }; + + timer2: timer@400c3000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c3000 0x1000>; + interrupts = <14>; + clocks = <&ccu1 CLK_CPU_TIMER2>; + clock-names = "timerclk"; + resets = <&rgu 34>; + }; + + timer3: timer@400c4000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c4000 0x1000>; + interrupts = <15>; + clocks = <&ccu1 CLK_CPU_TIMER3>; + clock-names = "timerclk"; + resets = <&rgu 35>; + }; + + ssp1: spi@400c5000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x400c5000 0x1000>; + interrupts = <23>; + clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; + clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 51>; + dmas = <&dmamux 11 2 2 + &dmamux 12 2 2 + &dmamux 3 3 2 + &dmamux 4 3 2 + &dmamux 5 2 2 + &dmamux 6 2 2 + &dmamux 13 2 2 + &dmamux 14 2 2>; + dma-names = "rx", "tx", "tx", "rx", + "tx", "rx", "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@400e0000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400e0000 0x1000>; + interrupts = <19>; + clocks = <&ccu1 CLK_APB3_I2C1>; + resets = <&rgu 49>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + dac: dac@400e1000 { + compatible = "nxp,lpc1850-dac"; + reg = <0x400e1000 0x1000>; + interrupts = <0>; + clocks = <&ccu1 CLK_APB3_DAC>; + resets = <&rgu 42>; + status = "disabled"; + }; + + can0: can@400e2000 { + compatible = "bosch,c_can"; + reg = <0x400e2000 0x1000>; + interrupts = <51>; + clocks = <&ccu1 CLK_APB3_CAN0>; + resets = <&rgu 55>; + status = "disabled"; + }; + + adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + resets = <&rgu 40>; + status = "disabled"; + }; + + adc1: adc@400e4000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e4000 0x1000>; + interrupts = <21>; + clocks = <&ccu1 CLK_APB3_ADC1>; + resets = <&rgu 41>; + status = "disabled"; + }; + + gpio: gpio@400f4000 { + compatible = "nxp,lpc1850-gpio"; + reg = <0x400f4000 0x4000>; + clocks = <&ccu1 CLK_CPU_GPIO>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, + <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>, + <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>, + <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>, + <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>, + <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>, + <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>, + <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>, + <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>, + <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>, + <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>, + <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>, + <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>, + <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>, + <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>, + <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>, + <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>, + <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>, + <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>, + <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>, + <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>, + <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>, + <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>, + <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>, + <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>, + <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>, + <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>, + <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>, + <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>, + <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>, + <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>, + <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>, + <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>, + <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>, + <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>, + <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>, + <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>, + <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>, + <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>, + <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; + }; + }; +}; -- cgit v1.2.3