From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- arch/powerpc/kernel/eeh_driver.c | 1112 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1112 insertions(+) create mode 100644 arch/powerpc/kernel/eeh_driver.c (limited to 'arch/powerpc/kernel/eeh_driver.c') diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c new file mode 100644 index 000000000..377d23f58 --- /dev/null +++ b/arch/powerpc/kernel/eeh_driver.c @@ -0,0 +1,1112 @@ +/* + * PCI Error Recovery Driver for RPA-compliant PPC64 platform. + * Copyright IBM Corp. 2004 2005 + * Copyright Linas Vepstas 2004, 2005 + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send comments and feedback to Linas Vepstas + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct eeh_rmv_data { + struct list_head edev_list; + int removed; +}; + +static int eeh_result_priority(enum pci_ers_result result) +{ + switch (result) { + case PCI_ERS_RESULT_NONE: + return 1; + case PCI_ERS_RESULT_NO_AER_DRIVER: + return 2; + case PCI_ERS_RESULT_RECOVERED: + return 3; + case PCI_ERS_RESULT_CAN_RECOVER: + return 4; + case PCI_ERS_RESULT_DISCONNECT: + return 5; + case PCI_ERS_RESULT_NEED_RESET: + return 6; + default: + WARN_ONCE(1, "Unknown pci_ers_result value: %d\n", (int)result); + return 0; + } +}; + +const char *pci_ers_result_name(enum pci_ers_result result) +{ + switch (result) { + case PCI_ERS_RESULT_NONE: + return "none"; + case PCI_ERS_RESULT_CAN_RECOVER: + return "can recover"; + case PCI_ERS_RESULT_NEED_RESET: + return "need reset"; + case PCI_ERS_RESULT_DISCONNECT: + return "disconnect"; + case PCI_ERS_RESULT_RECOVERED: + return "recovered"; + case PCI_ERS_RESULT_NO_AER_DRIVER: + return "no AER driver"; + default: + WARN_ONCE(1, "Unknown result type: %d\n", (int)result); + return "unknown"; + } +}; + +static __printf(2, 3) void eeh_edev_info(const struct eeh_dev *edev, + const char *fmt, ...) +{ + struct va_format vaf; + va_list args; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + printk(KERN_INFO "EEH: PE#%x (PCI %s): %pV\n", edev->pe_config_addr, + edev->pdev ? dev_name(&edev->pdev->dev) : "none", &vaf); + + va_end(args); +} + +static enum pci_ers_result pci_ers_merge_result(enum pci_ers_result old, + enum pci_ers_result new) +{ + if (eeh_result_priority(new) > eeh_result_priority(old)) + return new; + return old; +} + +static bool eeh_dev_removed(struct eeh_dev *edev) +{ + return !edev || (edev->mode & EEH_DEV_REMOVED); +} + +static bool eeh_edev_actionable(struct eeh_dev *edev) +{ + return (edev->pdev && !eeh_dev_removed(edev) && + !eeh_pe_passed(edev->pe)); +} + +/** + * eeh_pcid_get - Get the PCI device driver + * @pdev: PCI device + * + * The function is used to retrieve the PCI device driver for + * the indicated PCI device. Besides, we will increase the reference + * of the PCI device driver to prevent that being unloaded on + * the fly. Otherwise, kernel crash would be seen. + */ +static inline struct pci_driver *eeh_pcid_get(struct pci_dev *pdev) +{ + if (!pdev || !pdev->driver) + return NULL; + + if (!try_module_get(pdev->driver->driver.owner)) + return NULL; + + return pdev->driver; +} + +/** + * eeh_pcid_put - Dereference on the PCI device driver + * @pdev: PCI device + * + * The function is called to do dereference on the PCI device + * driver of the indicated PCI device. + */ +static inline void eeh_pcid_put(struct pci_dev *pdev) +{ + if (!pdev || !pdev->driver) + return; + + module_put(pdev->driver->driver.owner); +} + +/** + * eeh_disable_irq - Disable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called when reporting temporary or permanent + * error to the particular PCI device to disable interrupt of that + * device. If the device has enabled MSI or MSI-X interrupt, we needn't + * do real work because EEH should freeze DMA transfers for those PCI + * devices encountering EEH errors, which includes MSI or MSI-X. + */ +static void eeh_disable_irq(struct eeh_dev *edev) +{ + /* Don't disable MSI and MSI-X interrupts. They are + * effectively disabled by the DMA Stopped state + * when an EEH error occurs. + */ + if (edev->pdev->msi_enabled || edev->pdev->msix_enabled) + return; + + if (!irq_has_action(edev->pdev->irq)) + return; + + edev->mode |= EEH_DEV_IRQ_DISABLED; + disable_irq_nosync(edev->pdev->irq); +} + +/** + * eeh_enable_irq - Enable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called to enable interrupt while failed + * device could be resumed. + */ +static void eeh_enable_irq(struct eeh_dev *edev) +{ + if ((edev->mode) & EEH_DEV_IRQ_DISABLED) { + edev->mode &= ~EEH_DEV_IRQ_DISABLED; + /* + * FIXME !!!!! + * + * This is just ass backwards. This maze has + * unbalanced irq_enable/disable calls. So instead of + * finding the root cause it works around the warning + * in the irq_enable code by conditionally calling + * into it. + * + * That's just wrong.The warning in the core code is + * there to tell people to fix their asymmetries in + * their own code, not by abusing the core information + * to avoid it. + * + * I so wish that the assymetry would be the other way + * round and a few more irq_disable calls render that + * shit unusable forever. + * + * tglx + */ + if (irqd_irq_disabled(irq_get_irq_data(edev->pdev->irq))) + enable_irq(edev->pdev->irq); + } +} + +static void *eeh_dev_save_state(struct eeh_dev *edev, void *userdata) +{ + struct pci_dev *pdev; + + if (!edev) + return NULL; + + /* + * We cannot access the config space on some adapters. + * Otherwise, it will cause fenced PHB. We don't save + * the content in their config space and will restore + * from the initial config space saved when the EEH + * device is created. + */ + if (edev->pe && (edev->pe->state & EEH_PE_CFG_RESTRICTED)) + return NULL; + + pdev = eeh_dev_to_pci_dev(edev); + if (!pdev) + return NULL; + + pci_save_state(pdev); + return NULL; +} + +static void eeh_set_channel_state(struct eeh_pe *root, enum pci_channel_state s) +{ + struct eeh_pe *pe; + struct eeh_dev *edev, *tmp; + + eeh_for_each_pe(root, pe) + eeh_pe_for_each_dev(pe, edev, tmp) + if (eeh_edev_actionable(edev)) + edev->pdev->error_state = s; +} + +static void eeh_set_irq_state(struct eeh_pe *root, bool enable) +{ + struct eeh_pe *pe; + struct eeh_dev *edev, *tmp; + + eeh_for_each_pe(root, pe) { + eeh_pe_for_each_dev(pe, edev, tmp) { + if (!eeh_edev_actionable(edev)) + continue; + + if (!eeh_pcid_get(edev->pdev)) + continue; + + if (enable) + eeh_enable_irq(edev); + else + eeh_disable_irq(edev); + + eeh_pcid_put(edev->pdev); + } + } +} + +typedef enum pci_ers_result (*eeh_report_fn)(struct eeh_dev *, + struct pci_driver *); +static void eeh_pe_report_edev(struct eeh_dev *edev, eeh_report_fn fn, + enum pci_ers_result *result) +{ + struct pci_driver *driver; + enum pci_ers_result new_result; + + if (!edev->pdev) { + eeh_edev_info(edev, "no device"); + return; + } + device_lock(&edev->pdev->dev); + if (eeh_edev_actionable(edev)) { + driver = eeh_pcid_get(edev->pdev); + + if (!driver) + eeh_edev_info(edev, "no driver"); + else if (!driver->err_handler) + eeh_edev_info(edev, "driver not EEH aware"); + else if (edev->mode & EEH_DEV_NO_HANDLER) + eeh_edev_info(edev, "driver bound too late"); + else { + new_result = fn(edev, driver); + eeh_edev_info(edev, "%s driver reports: '%s'", + driver->name, + pci_ers_result_name(new_result)); + if (result) + *result = pci_ers_merge_result(*result, + new_result); + } + if (driver) + eeh_pcid_put(edev->pdev); + } else { + eeh_edev_info(edev, "not actionable (%d,%d,%d)", !!edev->pdev, + !eeh_dev_removed(edev), !eeh_pe_passed(edev->pe)); + } + device_unlock(&edev->pdev->dev); +} + +static void eeh_pe_report(const char *name, struct eeh_pe *root, + eeh_report_fn fn, enum pci_ers_result *result) +{ + struct eeh_pe *pe; + struct eeh_dev *edev, *tmp; + + pr_info("EEH: Beginning: '%s'\n", name); + eeh_for_each_pe(root, pe) eeh_pe_for_each_dev(pe, edev, tmp) + eeh_pe_report_edev(edev, fn, result); + if (result) + pr_info("EEH: Finished:'%s' with aggregate recovery state:'%s'\n", + name, pci_ers_result_name(*result)); + else + pr_info("EEH: Finished:'%s'", name); +} + +/** + * eeh_report_error - Report pci error to each device driver + * @edev: eeh device + * @driver: device's PCI driver + * + * Report an EEH error to each device driver. + */ +static enum pci_ers_result eeh_report_error(struct eeh_dev *edev, + struct pci_driver *driver) +{ + enum pci_ers_result rc; + struct pci_dev *dev = edev->pdev; + + if (!driver->err_handler->error_detected) + return PCI_ERS_RESULT_NONE; + + eeh_edev_info(edev, "Invoking %s->error_detected(IO frozen)", + driver->name); + rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen); + + edev->in_error = true; + pci_uevent_ers(dev, PCI_ERS_RESULT_NONE); + return rc; +} + +/** + * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled + * @edev: eeh device + * @driver: device's PCI driver + * + * Tells each device driver that IO ports, MMIO and config space I/O + * are now enabled. + */ +static enum pci_ers_result eeh_report_mmio_enabled(struct eeh_dev *edev, + struct pci_driver *driver) +{ + if (!driver->err_handler->mmio_enabled) + return PCI_ERS_RESULT_NONE; + eeh_edev_info(edev, "Invoking %s->mmio_enabled()", driver->name); + return driver->err_handler->mmio_enabled(edev->pdev); +} + +/** + * eeh_report_reset - Tell device that slot has been reset + * @edev: eeh device + * @driver: device's PCI driver + * + * This routine must be called while EEH tries to reset particular + * PCI device so that the associated PCI device driver could take + * some actions, usually to save data the driver needs so that the + * driver can work again while the device is recovered. + */ +static enum pci_ers_result eeh_report_reset(struct eeh_dev *edev, + struct pci_driver *driver) +{ + if (!driver->err_handler->slot_reset || !edev->in_error) + return PCI_ERS_RESULT_NONE; + eeh_edev_info(edev, "Invoking %s->slot_reset()", driver->name); + return driver->err_handler->slot_reset(edev->pdev); +} + +static void *eeh_dev_restore_state(struct eeh_dev *edev, void *userdata) +{ + struct pci_dev *pdev; + + if (!edev) + return NULL; + + /* + * The content in the config space isn't saved because + * the blocked config space on some adapters. We have + * to restore the initial saved config space when the + * EEH device is created. + */ + if (edev->pe && (edev->pe->state & EEH_PE_CFG_RESTRICTED)) { + if (list_is_last(&edev->list, &edev->pe->edevs)) + eeh_pe_restore_bars(edev->pe); + + return NULL; + } + + pdev = eeh_dev_to_pci_dev(edev); + if (!pdev) + return NULL; + + pci_restore_state(pdev); + return NULL; +} + +/** + * eeh_report_resume - Tell device to resume normal operations + * @edev: eeh device + * @driver: device's PCI driver + * + * This routine must be called to notify the device driver that it + * could resume so that the device driver can do some initialization + * to make the recovered device work again. + */ +static enum pci_ers_result eeh_report_resume(struct eeh_dev *edev, + struct pci_driver *driver) +{ + if (!driver->err_handler->resume || !edev->in_error) + return PCI_ERS_RESULT_NONE; + + eeh_edev_info(edev, "Invoking %s->resume()", driver->name); + driver->err_handler->resume(edev->pdev); + + pci_uevent_ers(edev->pdev, PCI_ERS_RESULT_RECOVERED); +#ifdef CONFIG_PCI_IOV + if (eeh_ops->notify_resume && eeh_dev_to_pdn(edev)) + eeh_ops->notify_resume(eeh_dev_to_pdn(edev)); +#endif + return PCI_ERS_RESULT_NONE; +} + +/** + * eeh_report_failure - Tell device driver that device is dead. + * @edev: eeh device + * @driver: device's PCI driver + * + * This informs the device driver that the device is permanently + * dead, and that no further recovery attempts will be made on it. + */ +static enum pci_ers_result eeh_report_failure(struct eeh_dev *edev, + struct pci_driver *driver) +{ + enum pci_ers_result rc; + + if (!driver->err_handler->error_detected) + return PCI_ERS_RESULT_NONE; + + eeh_edev_info(edev, "Invoking %s->error_detected(permanent failure)", + driver->name); + rc = driver->err_handler->error_detected(edev->pdev, + pci_channel_io_perm_failure); + + pci_uevent_ers(edev->pdev, PCI_ERS_RESULT_DISCONNECT); + return rc; +} + +static void *eeh_add_virt_device(void *data, void *userdata) +{ + struct pci_driver *driver; + struct eeh_dev *edev = (struct eeh_dev *)data; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + if (!(edev->physfn)) { + pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n", + __func__, pdn->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); + return NULL; + } + + driver = eeh_pcid_get(dev); + if (driver) { + if (driver->err_handler) { + eeh_pcid_put(dev); + return NULL; + } + eeh_pcid_put(dev); + } + +#ifdef CONFIG_PCI_IOV + pci_iov_add_virtfn(edev->physfn, pdn->vf_index); +#endif + return NULL; +} + +static void *eeh_rmv_device(struct eeh_dev *edev, void *userdata) +{ + struct pci_driver *driver; + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); + struct eeh_rmv_data *rmv_data = (struct eeh_rmv_data *)userdata; + int *removed = rmv_data ? &rmv_data->removed : NULL; + + /* + * Actually, we should remove the PCI bridges as well. + * However, that's lots of complexity to do that, + * particularly some of devices under the bridge might + * support EEH. So we just care about PCI devices for + * simplicity here. + */ + if (!dev || (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) + return NULL; + + /* + * We rely on count-based pcibios_release_device() to + * detach permanently offlined PEs. Unfortunately, that's + * not reliable enough. We might have the permanently + * offlined PEs attached, but we needn't take care of + * them and their child devices. + */ + if (eeh_dev_removed(edev)) + return NULL; + + if (removed) { + if (eeh_pe_passed(edev->pe)) + return NULL; + driver = eeh_pcid_get(dev); + if (driver) { + if (driver->err_handler && + driver->err_handler->error_detected && + driver->err_handler->slot_reset) { + eeh_pcid_put(dev); + return NULL; + } + eeh_pcid_put(dev); + } + } + + /* Remove it from PCI subsystem */ + pr_debug("EEH: Removing %s without EEH sensitive driver\n", + pci_name(dev)); + edev->bus = dev->bus; + edev->mode |= EEH_DEV_DISCONNECTED; + if (removed) + (*removed)++; + + if (edev->physfn) { +#ifdef CONFIG_PCI_IOV + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + pci_iov_remove_virtfn(edev->physfn, pdn->vf_index); + edev->pdev = NULL; +#endif + if (rmv_data) + list_add(&edev->rmv_list, &rmv_data->edev_list); + } else { + pci_lock_rescan_remove(); + pci_stop_and_remove_bus_device(dev); + pci_unlock_rescan_remove(); + } + + return NULL; +} + +static void *eeh_pe_detach_dev(struct eeh_pe *pe, void *userdata) +{ + struct eeh_dev *edev, *tmp; + + eeh_pe_for_each_dev(pe, edev, tmp) { + if (!(edev->mode & EEH_DEV_DISCONNECTED)) + continue; + + edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED); + eeh_rmv_from_parent_pe(edev); + } + + return NULL; +} + +/* + * Explicitly clear PE's frozen state for PowerNV where + * we have frozen PE until BAR restore is completed. It's + * harmless to clear it for pSeries. To be consistent with + * PE reset (for 3 times), we try to clear the frozen state + * for 3 times as well. + */ +static void *__eeh_clear_pe_frozen_state(struct eeh_pe *pe, void *flag) +{ + bool clear_sw_state = *(bool *)flag; + int i, rc = 1; + + for (i = 0; rc && i < 3; i++) + rc = eeh_unfreeze_pe(pe, clear_sw_state); + + /* Stop immediately on any errors */ + if (rc) { + pr_warn("%s: Failure %d unfreezing PHB#%x-PE#%x\n", + __func__, rc, pe->phb->global_number, pe->addr); + return (void *)pe; + } + + return NULL; +} + +static int eeh_clear_pe_frozen_state(struct eeh_pe *pe, + bool clear_sw_state) +{ + void *rc; + + rc = eeh_pe_traverse(pe, __eeh_clear_pe_frozen_state, &clear_sw_state); + if (!rc) + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + + return rc ? -EIO : 0; +} + +int eeh_pe_reset_and_recover(struct eeh_pe *pe) +{ + int ret; + + /* Bail if the PE is being recovered */ + if (pe->state & EEH_PE_RECOVERING) + return 0; + + /* Put the PE into recovery mode */ + eeh_pe_state_mark(pe, EEH_PE_RECOVERING); + + /* Save states */ + eeh_pe_dev_traverse(pe, eeh_dev_save_state, NULL); + + /* Issue reset */ + ret = eeh_pe_reset_full(pe); + if (ret) { + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); + return ret; + } + + /* Unfreeze the PE */ + ret = eeh_clear_pe_frozen_state(pe, true); + if (ret) { + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); + return ret; + } + + /* Restore device state */ + eeh_pe_dev_traverse(pe, eeh_dev_restore_state, NULL); + + /* Clear recovery mode */ + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); + + return 0; +} + +/** + * eeh_reset_device - Perform actual reset of a pci slot + * @driver_eeh_aware: Does the device's driver provide EEH support? + * @pe: EEH PE + * @bus: PCI bus corresponding to the isolcated slot + * @rmv_data: Optional, list to record removed devices + * + * This routine must be called to do reset on the indicated PE. + * During the reset, udev might be invoked because those affected + * PCI devices will be removed and then added. + */ +static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus, + struct eeh_rmv_data *rmv_data, + bool driver_eeh_aware) +{ + time64_t tstamp; + int cnt, rc; + struct eeh_dev *edev; + + /* pcibios will clear the counter; save the value */ + cnt = pe->freeze_count; + tstamp = pe->tstamp; + + /* + * We don't remove the corresponding PE instances because + * we need the information afterwords. The attached EEH + * devices are expected to be attached soon when calling + * into pci_hp_add_devices(). + */ + eeh_pe_state_mark(pe, EEH_PE_KEEP); + if (driver_eeh_aware || (pe->type & EEH_PE_VF)) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, rmv_data); + } else { + pci_lock_rescan_remove(); + pci_hp_remove_devices(bus); + pci_unlock_rescan_remove(); + } + + /* + * Reset the pci controller. (Asserts RST#; resets config space). + * Reconfigure bridges and devices. Don't try to bring the system + * up if the reset failed for some reason. + * + * During the reset, it's very dangerous to have uncontrolled PCI + * config accesses. So we prefer to block them. However, controlled + * PCI config accesses initiated from EEH itself are allowed. + */ + rc = eeh_pe_reset_full(pe); + if (rc) + return rc; + + pci_lock_rescan_remove(); + + /* Restore PE */ + eeh_ops->configure_bridge(pe); + eeh_pe_restore_bars(pe); + + /* Clear frozen state */ + rc = eeh_clear_pe_frozen_state(pe, false); + if (rc) { + pci_unlock_rescan_remove(); + return rc; + } + + /* Give the system 5 seconds to finish running the user-space + * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, + * this is a hack, but if we don't do this, and try to bring + * the device up before the scripts have taken it down, + * potentially weird things happen. + */ + if (!driver_eeh_aware || rmv_data->removed) { + pr_info("EEH: Sleep 5s ahead of %s hotplug\n", + (driver_eeh_aware ? "partial" : "complete")); + ssleep(5); + + /* + * The EEH device is still connected with its parent + * PE. We should disconnect it so the binding can be + * rebuilt when adding PCI devices. + */ + edev = list_first_entry(&pe->edevs, struct eeh_dev, list); + eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL); + if (pe->type & EEH_PE_VF) { + eeh_add_virt_device(edev, NULL); + } else { + if (!driver_eeh_aware) + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + pci_hp_add_devices(bus); + } + } + eeh_pe_state_clear(pe, EEH_PE_KEEP); + + pe->tstamp = tstamp; + pe->freeze_count = cnt; + + pci_unlock_rescan_remove(); + return 0; +} + +/* The longest amount of time to wait for a pci device + * to come back on line, in seconds. + */ +#define MAX_WAIT_FOR_RECOVERY 300 + +/** + * eeh_handle_normal_event - Handle EEH events on a specific PE + * @pe: EEH PE - which should not be used after we return, as it may + * have been invalidated. + * + * Attempts to recover the given PE. If recovery fails or the PE has failed + * too many times, remove the PE. + * + * While PHB detects address or data parity errors on particular PCI + * slot, the associated PE will be frozen. Besides, DMA's occurring + * to wild addresses (which usually happen due to bugs in device + * drivers or in PCI adapter firmware) can cause EEH error. #SERR, + * #PERR or other misc PCI-related errors also can trigger EEH errors. + * + * Recovery process consists of unplugging the device driver (which + * generated hotplug events to userspace), then issuing a PCI #RST to + * the device, then reconfiguring the PCI config space for all bridges + * & devices under this slot, and then finally restarting the device + * drivers (which cause a second set of hotplug events to go out to + * userspace). + */ +void eeh_handle_normal_event(struct eeh_pe *pe) +{ + struct pci_bus *bus; + struct eeh_dev *edev, *tmp; + struct eeh_pe *tmp_pe; + int rc = 0; + enum pci_ers_result result = PCI_ERS_RESULT_NONE; + struct eeh_rmv_data rmv_data = {LIST_HEAD_INIT(rmv_data.edev_list), 0}; + + bus = eeh_pe_bus_get(pe); + if (!bus) { + pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n", + __func__, pe->phb->global_number, pe->addr); + return; + } + + eeh_pe_state_mark(pe, EEH_PE_RECOVERING); + + eeh_pe_update_time_stamp(pe); + pe->freeze_count++; + if (pe->freeze_count > eeh_max_freezes) { + pr_err("EEH: PHB#%x-PE#%x has failed %d times in the last hour and has been permanently disabled.\n", + pe->phb->global_number, pe->addr, + pe->freeze_count); + goto hard_fail; + } + pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n", + pe->freeze_count, eeh_max_freezes); + + eeh_for_each_pe(pe, tmp_pe) + eeh_pe_for_each_dev(tmp_pe, edev, tmp) + edev->mode &= ~EEH_DEV_NO_HANDLER; + + /* Walk the various device drivers attached to this slot through + * a reset sequence, giving each an opportunity to do what it needs + * to accomplish the reset. Each child gets a report of the + * status ... if any child can't handle the reset, then the entire + * slot is dlpar removed and added. + * + * When the PHB is fenced, we have to issue a reset to recover from + * the error. Override the result if necessary to have partially + * hotplug for this case. + */ + pr_info("EEH: Notify device drivers to shutdown\n"); + eeh_set_channel_state(pe, pci_channel_io_frozen); + eeh_set_irq_state(pe, false); + eeh_pe_report("error_detected(IO frozen)", pe, eeh_report_error, + &result); + if ((pe->type & EEH_PE_PHB) && + result != PCI_ERS_RESULT_NONE && + result != PCI_ERS_RESULT_NEED_RESET) + result = PCI_ERS_RESULT_NEED_RESET; + + /* Get the current PCI slot state. This can take a long time, + * sometimes over 300 seconds for certain systems. + */ + rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); + if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { + pr_warn("EEH: Permanent failure\n"); + goto hard_fail; + } + + /* Since rtas may enable MMIO when posting the error log, + * don't post the error log until after all dev drivers + * have been informed. + */ + pr_info("EEH: Collect temporary log\n"); + eeh_slot_error_detail(pe, EEH_LOG_TEMP); + + /* If all device drivers were EEH-unaware, then shut + * down all of the device drivers, and hope they + * go down willingly, without panicing the system. + */ + if (result == PCI_ERS_RESULT_NONE) { + pr_info("EEH: Reset with hotplug activity\n"); + rc = eeh_reset_device(pe, bus, NULL, false); + if (rc) { + pr_warn("%s: Unable to reset, err=%d\n", + __func__, rc); + goto hard_fail; + } + } + + /* If all devices reported they can proceed, then re-enable MMIO */ + if (result == PCI_ERS_RESULT_CAN_RECOVER) { + pr_info("EEH: Enable I/O for affected devices\n"); + rc = eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); + + if (rc < 0) + goto hard_fail; + if (rc) { + result = PCI_ERS_RESULT_NEED_RESET; + } else { + pr_info("EEH: Notify device drivers to resume I/O\n"); + eeh_pe_report("mmio_enabled", pe, + eeh_report_mmio_enabled, &result); + } + } + + /* If all devices reported they can proceed, then re-enable DMA */ + if (result == PCI_ERS_RESULT_CAN_RECOVER) { + pr_info("EEH: Enabled DMA for affected devices\n"); + rc = eeh_pci_enable(pe, EEH_OPT_THAW_DMA); + + if (rc < 0) + goto hard_fail; + if (rc) { + result = PCI_ERS_RESULT_NEED_RESET; + } else { + /* + * We didn't do PE reset for the case. The PE + * is still in frozen state. Clear it before + * resuming the PE. + */ + eeh_pe_state_clear(pe, EEH_PE_ISOLATED); + result = PCI_ERS_RESULT_RECOVERED; + } + } + + /* If any device has a hard failure, then shut off everything. */ + if (result == PCI_ERS_RESULT_DISCONNECT) { + pr_warn("EEH: Device driver gave up\n"); + goto hard_fail; + } + + /* If any device called out for a reset, then reset the slot */ + if (result == PCI_ERS_RESULT_NEED_RESET) { + pr_info("EEH: Reset without hotplug activity\n"); + rc = eeh_reset_device(pe, bus, &rmv_data, true); + if (rc) { + pr_warn("%s: Cannot reset, err=%d\n", + __func__, rc); + goto hard_fail; + } + + pr_info("EEH: Notify device drivers " + "the completion of reset\n"); + result = PCI_ERS_RESULT_NONE; + eeh_set_channel_state(pe, pci_channel_io_normal); + eeh_set_irq_state(pe, true); + eeh_pe_report("slot_reset", pe, eeh_report_reset, &result); + } + + /* All devices should claim they have recovered by now. */ + if ((result != PCI_ERS_RESULT_RECOVERED) && + (result != PCI_ERS_RESULT_NONE)) { + pr_warn("EEH: Not recovered\n"); + goto hard_fail; + } + + /* + * For those hot removed VFs, we should add back them after PF get + * recovered properly. + */ + list_for_each_entry_safe(edev, tmp, &rmv_data.edev_list, rmv_list) { + eeh_add_virt_device(edev, NULL); + list_del(&edev->rmv_list); + } + + /* Tell all device drivers that they can resume operations */ + pr_info("EEH: Notify device driver to resume\n"); + eeh_set_channel_state(pe, pci_channel_io_normal); + eeh_set_irq_state(pe, true); + eeh_pe_report("resume", pe, eeh_report_resume, NULL); + eeh_for_each_pe(pe, tmp_pe) { + eeh_pe_for_each_dev(tmp_pe, edev, tmp) { + edev->mode &= ~EEH_DEV_NO_HANDLER; + edev->in_error = false; + } + } + + pr_info("EEH: Recovery successful.\n"); + goto final; + +hard_fail: + /* + * About 90% of all real-life EEH failures in the field + * are due to poorly seated PCI cards. Only 10% or so are + * due to actual, failed cards. + */ + pr_err("EEH: Unable to recover from failure from PHB#%x-PE#%x.\n" + "Please try reseating or replacing it\n", + pe->phb->global_number, pe->addr); + + eeh_slot_error_detail(pe, EEH_LOG_PERM); + + /* Notify all devices that they're about to go down. */ + eeh_set_channel_state(pe, pci_channel_io_perm_failure); + eeh_set_irq_state(pe, false); + eeh_pe_report("error_detected(permanent failure)", pe, + eeh_report_failure, NULL); + + /* Mark the PE to be removed permanently */ + eeh_pe_state_mark(pe, EEH_PE_REMOVED); + + /* + * Shut down the device drivers for good. We mark + * all removed devices correctly to avoid access + * the their PCI config any more. + */ + if (pe->type & EEH_PE_VF) { + eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + } else { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); + + pci_lock_rescan_remove(); + pci_hp_remove_devices(bus); + pci_unlock_rescan_remove(); + /* The passed PE should no longer be used */ + return; + } +final: + eeh_pe_state_clear(pe, EEH_PE_RECOVERING); +} + +/** + * eeh_handle_special_event - Handle EEH events without a specific failing PE + * + * Called when an EEH event is detected but can't be narrowed down to a + * specific PE. Iterates through possible failures and handles them as + * necessary. + */ +void eeh_handle_special_event(void) +{ + struct eeh_pe *pe, *phb_pe, *tmp_pe; + struct eeh_dev *edev, *tmp_edev; + struct pci_bus *bus; + struct pci_controller *hose; + unsigned long flags; + int rc; + + + do { + rc = eeh_ops->next_error(&pe); + + switch (rc) { + case EEH_NEXT_ERR_DEAD_IOC: + /* Mark all PHBs in dead state */ + eeh_serialize_lock(&flags); + + /* Purge all events */ + eeh_remove_event(NULL, true); + + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe) continue; + + eeh_pe_state_mark(phb_pe, EEH_PE_ISOLATED); + } + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_FROZEN_PE: + case EEH_NEXT_ERR_FENCED_PHB: + case EEH_NEXT_ERR_DEAD_PHB: + /* Mark the PE in fenced state */ + eeh_serialize_lock(&flags); + + /* Purge all events of the PHB */ + eeh_remove_event(pe, true); + + if (rc == EEH_NEXT_ERR_DEAD_PHB) + eeh_pe_state_mark(pe, EEH_PE_ISOLATED); + else + eeh_pe_state_mark(pe, + EEH_PE_ISOLATED | EEH_PE_RECOVERING); + + eeh_serialize_unlock(flags); + + break; + case EEH_NEXT_ERR_NONE: + return; + default: + pr_warn("%s: Invalid value %d from next_error()\n", + __func__, rc); + return; + } + + /* + * For fenced PHB and frozen PE, it's handled as normal + * event. We have to remove the affected PHBs for dead + * PHB and IOC + */ + if (rc == EEH_NEXT_ERR_FROZEN_PE || + rc == EEH_NEXT_ERR_FENCED_PHB) { + eeh_handle_normal_event(pe); + } else { + pci_lock_rescan_remove(); + list_for_each_entry(hose, &hose_list, list_node) { + phb_pe = eeh_phb_pe_get(hose); + if (!phb_pe || + !(phb_pe->state & EEH_PE_ISOLATED) || + (phb_pe->state & EEH_PE_RECOVERING)) + continue; + + eeh_for_each_pe(pe, tmp_pe) + eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev) + edev->mode &= ~EEH_DEV_NO_HANDLER; + + /* Notify all devices to be down */ + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); + eeh_set_channel_state(pe, pci_channel_io_perm_failure); + eeh_pe_report( + "error_detected(permanent failure)", pe, + eeh_report_failure, NULL); + bus = eeh_pe_bus_get(phb_pe); + if (!bus) { + pr_err("%s: Cannot find PCI bus for " + "PHB#%x-PE#%x\n", + __func__, + pe->phb->global_number, + pe->addr); + break; + } + pci_hp_remove_devices(bus); + } + pci_unlock_rescan_remove(); + } + + /* + * If we have detected dead IOC, we needn't proceed + * any more since all PHBs would have been removed + */ + if (rc == EEH_NEXT_ERR_DEAD_IOC) + break; + } while (rc != EEH_NEXT_ERR_NONE); +} -- cgit v1.2.3