From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- arch/x86/entry/entry_64.S | 1751 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1751 insertions(+) create mode 100644 arch/x86/entry/entry_64.S (limited to 'arch/x86/entry/entry_64.S') diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S new file mode 100644 index 000000000..dfe26f3cf --- /dev/null +++ b/arch/x86/entry/entry_64.S @@ -0,0 +1,1751 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * linux/arch/x86_64/entry.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs + * Copyright (C) 2000 Pavel Machek + * + * entry.S contains the system-call and fault low-level handling routines. + * + * Some of this is documented in Documentation/x86/entry_64.txt + * + * A note on terminology: + * - iret frame: Architecture defined interrupt frame from SS to RIP + * at the top of the kernel process stack. + * + * Some macro usage: + * - ENTRY/END: Define functions in the symbol table. + * - TRACE_IRQ_*: Trace hardirq state for lock debugging. + * - idtentry: Define exception entry points. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "calling.h" + +.code64 +.section .entry.text, "ax" + +#ifdef CONFIG_PARAVIRT +ENTRY(native_usergs_sysret64) + UNWIND_HINT_EMPTY + swapgs + sysretq +END(native_usergs_sysret64) +#endif /* CONFIG_PARAVIRT */ + +.macro TRACE_IRQS_FLAGS flags:req +#ifdef CONFIG_TRACE_IRQFLAGS + btl $9, \flags /* interrupts off? */ + jnc 1f + TRACE_IRQS_ON +1: +#endif +.endm + +.macro TRACE_IRQS_IRETQ + TRACE_IRQS_FLAGS EFLAGS(%rsp) +.endm + +/* + * When dynamic function tracer is enabled it will add a breakpoint + * to all locations that it is about to modify, sync CPUs, update + * all the code, sync CPUs, then remove the breakpoints. In this time + * if lockdep is enabled, it might jump back into the debug handler + * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). + * + * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to + * make sure the stack pointer does not get reset back to the top + * of the debug stack, and instead just reuses the current stack. + */ +#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) + +.macro TRACE_IRQS_OFF_DEBUG + call debug_stack_set_zero + TRACE_IRQS_OFF + call debug_stack_reset +.endm + +.macro TRACE_IRQS_ON_DEBUG + call debug_stack_set_zero + TRACE_IRQS_ON + call debug_stack_reset +.endm + +.macro TRACE_IRQS_IRETQ_DEBUG + btl $9, EFLAGS(%rsp) /* interrupts off? */ + jnc 1f + TRACE_IRQS_ON_DEBUG +1: +.endm + +#else +# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF +# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON +# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ +#endif + +/* + * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers. + * + * This is the only entry point used for 64-bit system calls. The + * hardware interface is reasonably well designed and the register to + * argument mapping Linux uses fits well with the registers that are + * available when SYSCALL is used. + * + * SYSCALL instructions can be found inlined in libc implementations as + * well as some other programs and libraries. There are also a handful + * of SYSCALL instructions in the vDSO used, for example, as a + * clock_gettimeofday fallback. + * + * 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11, + * then loads new ss, cs, and rip from previously programmed MSRs. + * rflags gets masked by a value from another MSR (so CLD and CLAC + * are not needed). SYSCALL does not save anything on the stack + * and does not change rsp. + * + * Registers on entry: + * rax system call number + * rcx return address + * r11 saved rflags (note: r11 is callee-clobbered register in C ABI) + * rdi arg0 + * rsi arg1 + * rdx arg2 + * r10 arg3 (needs to be moved to rcx to conform to C ABI) + * r8 arg4 + * r9 arg5 + * (note: r12-r15, rbp, rbx are callee-preserved in C ABI) + * + * Only called from user space. + * + * When user can change pt_regs->foo always force IRET. That is because + * it deals with uncanonical addresses better. SYSRET has trouble + * with them due to bugs in both AMD and Intel CPUs. + */ + + .pushsection .entry_trampoline, "ax" + +/* + * The code in here gets remapped into cpu_entry_area's trampoline. This means + * that the assembler and linker have the wrong idea as to where this code + * lives (and, in fact, it's mapped more than once, so it's not even at a + * fixed address). So we can't reference any symbols outside the entry + * trampoline and expect it to work. + * + * Instead, we carefully abuse %rip-relative addressing. + * _entry_trampoline(%rip) refers to the start of the remapped) entry + * trampoline. We can thus find cpu_entry_area with this macro: + */ + +#define CPU_ENTRY_AREA \ + _entry_trampoline - CPU_ENTRY_AREA_entry_trampoline(%rip) + +/* The top word of the SYSENTER stack is hot and is usable as scratch space. */ +#define RSP_SCRATCH CPU_ENTRY_AREA_entry_stack + \ + SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA + +ENTRY(entry_SYSCALL_64_trampoline) + UNWIND_HINT_EMPTY + swapgs + + /* Stash the user RSP. */ + movq %rsp, RSP_SCRATCH + + /* Note: using %rsp as a scratch reg. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + + /* Load the top of the task stack into RSP */ + movq CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp + + /* Start building the simulated IRET frame. */ + pushq $__USER_DS /* pt_regs->ss */ + pushq RSP_SCRATCH /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ + + /* + * x86 lacks a near absolute jump, and we can't jump to the real + * entry text with a relative jump. We could push the target + * address and then use retq, but this destroys the pipeline on + * many CPUs (wasting over 20 cycles on Sandy Bridge). Instead, + * spill RDI and restore it in a second-stage trampoline. + */ + pushq %rdi + movq $entry_SYSCALL_64_stage2, %rdi + JMP_NOSPEC %rdi +END(entry_SYSCALL_64_trampoline) + + .popsection + +ENTRY(entry_SYSCALL_64_stage2) + UNWIND_HINT_EMPTY + popq %rdi + jmp entry_SYSCALL_64_after_hwframe +END(entry_SYSCALL_64_stage2) + +ENTRY(entry_SYSCALL_64) + UNWIND_HINT_EMPTY + /* + * Interrupts are off on entry. + * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON, + * it is too small to ever cause noticeable irq latency. + */ + + swapgs + /* + * This path is only taken when PAGE_TABLE_ISOLATION is disabled so it + * is not required to switch CR3. + */ + movq %rsp, PER_CPU_VAR(rsp_scratch) + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + /* Construct struct pt_regs on stack */ + pushq $__USER_DS /* pt_regs->ss */ + pushq PER_CPU_VAR(rsp_scratch) /* pt_regs->sp */ + pushq %r11 /* pt_regs->flags */ + pushq $__USER_CS /* pt_regs->cs */ + pushq %rcx /* pt_regs->ip */ +GLOBAL(entry_SYSCALL_64_after_hwframe) + pushq %rax /* pt_regs->orig_ax */ + + PUSH_AND_CLEAR_REGS rax=$-ENOSYS + + TRACE_IRQS_OFF + + /* IRQs are off. */ + movq %rax, %rdi + movq %rsp, %rsi + call do_syscall_64 /* returns with IRQs disabled */ + + TRACE_IRQS_IRETQ /* we're about to change IF */ + + /* + * Try to use SYSRET instead of IRET if we're returning to + * a completely clean 64-bit userspace context. If we're not, + * go to the slow exit path. + */ + movq RCX(%rsp), %rcx + movq RIP(%rsp), %r11 + + cmpq %rcx, %r11 /* SYSRET requires RCX == RIP */ + jne swapgs_restore_regs_and_return_to_usermode + + /* + * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP + * in kernel space. This essentially lets the user take over + * the kernel, since userspace controls RSP. + * + * If width of "canonical tail" ever becomes variable, this will need + * to be updated to remain correct on both old and new CPUs. + * + * Change top bits to match most significant bit (47th or 56th bit + * depending on paging mode) in the address. + */ +#ifdef CONFIG_X86_5LEVEL + ALTERNATIVE "shl $(64 - 48), %rcx; sar $(64 - 48), %rcx", \ + "shl $(64 - 57), %rcx; sar $(64 - 57), %rcx", X86_FEATURE_LA57 +#else + shl $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx + sar $(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx +#endif + + /* If this changed %rcx, it was not canonical */ + cmpq %rcx, %r11 + jne swapgs_restore_regs_and_return_to_usermode + + cmpq $__USER_CS, CS(%rsp) /* CS must match SYSRET */ + jne swapgs_restore_regs_and_return_to_usermode + + movq R11(%rsp), %r11 + cmpq %r11, EFLAGS(%rsp) /* R11 == RFLAGS */ + jne swapgs_restore_regs_and_return_to_usermode + + /* + * SYSCALL clears RF when it saves RFLAGS in R11 and SYSRET cannot + * restore RF properly. If the slowpath sets it for whatever reason, we + * need to restore it correctly. + * + * SYSRET can restore TF, but unlike IRET, restoring TF results in a + * trap from userspace immediately after SYSRET. This would cause an + * infinite loop whenever #DB happens with register state that satisfies + * the opportunistic SYSRET conditions. For example, single-stepping + * this user code: + * + * movq $stuck_here, %rcx + * pushfq + * popq %r11 + * stuck_here: + * + * would never get past 'stuck_here'. + */ + testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11 + jnz swapgs_restore_regs_and_return_to_usermode + + /* nothing to check for RSP */ + + cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */ + jne swapgs_restore_regs_and_return_to_usermode + + /* + * We win! This label is here just for ease of understanding + * perf profiles. Nothing jumps here. + */ +syscall_return_via_sysret: + /* rcx and r11 are already restored (see code above) */ + POP_REGS pop_rdi=0 skip_r11rcx=1 + + /* + * Now all regs are restored except RSP and RDI. + * Save old stack pointer and switch to trampoline stack. + */ + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp + UNWIND_HINT_EMPTY + + pushq RSP-RDI(%rdi) /* RSP */ + pushq (%rdi) /* RDI */ + + /* + * We are on the trampoline stack. All regs except RDI are live. + * We can do future final exit work right here. + */ + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi + + popq %rdi + popq %rsp + USERGS_SYSRET64 +END(entry_SYSCALL_64) + +/* + * %rdi: prev task + * %rsi: next task + */ +ENTRY(__switch_to_asm) + UNWIND_HINT_FUNC + /* + * Save callee-saved registers + * This must match the order in inactive_task_frame + */ + pushq %rbp + pushq %rbx + pushq %r12 + pushq %r13 + pushq %r14 + pushq %r15 + pushfq + + /* switch stack */ + movq %rsp, TASK_threadsp(%rdi) + movq TASK_threadsp(%rsi), %rsp + +#ifdef CONFIG_STACKPROTECTOR + movq TASK_stack_canary(%rsi), %rbx + movq %rbx, PER_CPU_VAR(irq_stack_union)+stack_canary_offset +#endif + +#ifdef CONFIG_RETPOLINE + /* + * When switching from a shallower to a deeper call stack + * the RSB may either underflow or use entries populated + * with userspace addresses. On CPUs where those concerns + * exist, overwrite the RSB with entries which capture + * speculative execution to prevent attack. + */ + FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW +#endif + + /* restore callee-saved registers */ + popfq + popq %r15 + popq %r14 + popq %r13 + popq %r12 + popq %rbx + popq %rbp + + jmp __switch_to +END(__switch_to_asm) + +/* + * A newly forked process directly context switches into this address. + * + * rax: prev task we switched from + * rbx: kernel thread func (NULL for user thread) + * r12: kernel thread arg + */ +ENTRY(ret_from_fork) + UNWIND_HINT_EMPTY + movq %rax, %rdi + call schedule_tail /* rdi: 'prev' task parameter */ + + testq %rbx, %rbx /* from kernel_thread? */ + jnz 1f /* kernel threads are uncommon */ + +2: + UNWIND_HINT_REGS + movq %rsp, %rdi + call syscall_return_slowpath /* returns with IRQs disabled */ + TRACE_IRQS_ON /* user mode is traced as IRQS on */ + jmp swapgs_restore_regs_and_return_to_usermode + +1: + /* kernel thread */ + UNWIND_HINT_EMPTY + movq %r12, %rdi + CALL_NOSPEC %rbx + /* + * A kernel thread is allowed to return here after successfully + * calling do_execve(). Exit to userspace to complete the execve() + * syscall. + */ + movq $0, RAX(%rsp) + jmp 2b +END(ret_from_fork) + +/* + * Build the entry stubs with some assembler magic. + * We pack 1 stub into every 8-byte block. + */ + .align 8 +ENTRY(irq_entries_start) + vector=FIRST_EXTERNAL_VECTOR + .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR) + UNWIND_HINT_IRET_REGS + pushq $(~vector+0x80) /* Note: always in signed byte range */ + jmp common_interrupt + .align 8 + vector=vector+1 + .endr +END(irq_entries_start) + + .align 8 +ENTRY(spurious_entries_start) + vector=FIRST_SYSTEM_VECTOR + .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR) + UNWIND_HINT_IRET_REGS + pushq $(~vector+0x80) /* Note: always in signed byte range */ + jmp common_spurious + .align 8 + vector=vector+1 + .endr +END(spurious_entries_start) + +.macro DEBUG_ENTRY_ASSERT_IRQS_OFF +#ifdef CONFIG_DEBUG_ENTRY + pushq %rax + SAVE_FLAGS(CLBR_RAX) + testl $X86_EFLAGS_IF, %eax + jz .Lokay_\@ + ud2 +.Lokay_\@: + popq %rax +#endif +.endm + +/* + * Enters the IRQ stack if we're not already using it. NMI-safe. Clobbers + * flags and puts old RSP into old_rsp, and leaves all other GPRs alone. + * Requires kernel GSBASE. + * + * The invariant is that, if irq_count != -1, then the IRQ stack is in use. + */ +.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 + DEBUG_ENTRY_ASSERT_IRQS_OFF + + .if \save_ret + /* + * If save_ret is set, the original stack contains one additional + * entry -- the return address. Therefore, move the address one + * entry below %rsp to \old_rsp. + */ + leaq 8(%rsp), \old_rsp + .else + movq %rsp, \old_rsp + .endif + + .if \regs + UNWIND_HINT_REGS base=\old_rsp + .endif + + incl PER_CPU_VAR(irq_count) + jnz .Lirq_stack_push_old_rsp_\@ + + /* + * Right now, if we just incremented irq_count to zero, we've + * claimed the IRQ stack but we haven't switched to it yet. + * + * If anything is added that can interrupt us here without using IST, + * it must be *extremely* careful to limit its stack usage. This + * could include kprobes and a hypothetical future IST-less #DB + * handler. + * + * The OOPS unwinder relies on the word at the top of the IRQ + * stack linking back to the previous RSP for the entire time we're + * on the IRQ stack. For this to work reliably, we need to write + * it before we actually move ourselves to the IRQ stack. + */ + + movq \old_rsp, PER_CPU_VAR(irq_stack_union + IRQ_STACK_SIZE - 8) + movq PER_CPU_VAR(irq_stack_ptr), %rsp + +#ifdef CONFIG_DEBUG_ENTRY + /* + * If the first movq above becomes wrong due to IRQ stack layout + * changes, the only way we'll notice is if we try to unwind right + * here. Assert that we set up the stack right to catch this type + * of bug quickly. + */ + cmpq -8(%rsp), \old_rsp + je .Lirq_stack_okay\@ + ud2 + .Lirq_stack_okay\@: +#endif + +.Lirq_stack_push_old_rsp_\@: + pushq \old_rsp + + .if \regs + UNWIND_HINT_REGS indirect=1 + .endif + + .if \save_ret + /* + * Push the return address to the stack. This return address can + * be found at the "real" original RSP, which was offset by 8 at + * the beginning of this macro. + */ + pushq -8(\old_rsp) + .endif +.endm + +/* + * Undoes ENTER_IRQ_STACK. + */ +.macro LEAVE_IRQ_STACK regs=1 + DEBUG_ENTRY_ASSERT_IRQS_OFF + /* We need to be off the IRQ stack before decrementing irq_count. */ + popq %rsp + + .if \regs + UNWIND_HINT_REGS + .endif + + /* + * As in ENTER_IRQ_STACK, irq_count == 0, we are still claiming + * the irq stack but we're not on it. + */ + + decl PER_CPU_VAR(irq_count) +.endm + +/* + * Interrupt entry helper function. + * + * Entry runs with interrupts off. Stack layout at entry: + * +----------------------------------------------------+ + * | regs->ss | + * | regs->rsp | + * | regs->eflags | + * | regs->cs | + * | regs->ip | + * +----------------------------------------------------+ + * | regs->orig_ax = ~(interrupt number) | + * +----------------------------------------------------+ + * | return address | + * +----------------------------------------------------+ + */ +ENTRY(interrupt_entry) + UNWIND_HINT_IRET_REGS offset=16 + ASM_CLAC + cld + + testb $3, CS-ORIG_RAX+8(%rsp) + jz 1f + SWAPGS + FENCE_SWAPGS_USER_ENTRY + /* + * Switch to the thread stack. The IRET frame and orig_ax are + * on the stack, as well as the return address. RDI..R12 are + * not (yet) on the stack and space has not (yet) been + * allocated for them. + */ + pushq %rdi + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + /* + * We have RDI, return address, and orig_ax on the stack on + * top of the IRET frame. That means offset=24 + */ + UNWIND_HINT_IRET_REGS base=%rdi offset=24 + + pushq 7*8(%rdi) /* regs->ss */ + pushq 6*8(%rdi) /* regs->rsp */ + pushq 5*8(%rdi) /* regs->eflags */ + pushq 4*8(%rdi) /* regs->cs */ + pushq 3*8(%rdi) /* regs->ip */ + UNWIND_HINT_IRET_REGS + pushq 2*8(%rdi) /* regs->orig_ax */ + pushq 8(%rdi) /* return address */ + + movq (%rdi), %rdi + jmp 2f +1: + FENCE_SWAPGS_KERNEL_ENTRY +2: + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 + + testb $3, CS+8(%rsp) + jz 1f + + /* + * IRQ from user mode. + * + * We need to tell lockdep that IRQs are off. We can't do this until + * we fix gsbase, and we should do it before enter_from_user_mode + * (which can take locks). Since TRACE_IRQS_OFF is idempotent, + * the simplest way to handle it is to just call it twice if + * we enter from user mode. There's no reason to optimize this since + * TRACE_IRQS_OFF is a no-op if lockdep is off. + */ + TRACE_IRQS_OFF + + CALL_enter_from_user_mode + +1: + ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 + /* We entered an interrupt context - irqs are off: */ + TRACE_IRQS_OFF + + ret +END(interrupt_entry) +_ASM_NOKPROBE(interrupt_entry) + + +/* Interrupt entry/exit. */ + +/* + * The interrupt stubs push (~vector+0x80) onto the stack and + * then jump to common_spurious/interrupt. + */ +common_spurious: + addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call smp_spurious_interrupt /* rdi points to pt_regs */ + jmp ret_from_intr +END(common_spurious) +_ASM_NOKPROBE(common_spurious) + +/* common_interrupt is a hotpath. Align it */ + .p2align CONFIG_X86_L1_CACHE_SHIFT +common_interrupt: + addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call do_IRQ /* rdi points to pt_regs */ + /* 0(%rsp): old RSP */ +ret_from_intr: + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + + LEAVE_IRQ_STACK + + testb $3, CS(%rsp) + jz retint_kernel + + /* Interrupt came from user space */ +GLOBAL(retint_user) + mov %rsp,%rdi + call prepare_exit_to_usermode + TRACE_IRQS_IRETQ + +GLOBAL(swapgs_restore_regs_and_return_to_usermode) +#ifdef CONFIG_DEBUG_ENTRY + /* Assert that pt_regs indicates user mode. */ + testb $3, CS(%rsp) + jnz 1f + ud2 +1: +#endif + POP_REGS pop_rdi=0 + + /* + * The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS. + * Save old stack pointer and switch to trampoline stack. + */ + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp + UNWIND_HINT_EMPTY + + /* Copy the IRET frame to the trampoline stack. */ + pushq 6*8(%rdi) /* SS */ + pushq 5*8(%rdi) /* RSP */ + pushq 4*8(%rdi) /* EFLAGS */ + pushq 3*8(%rdi) /* CS */ + pushq 2*8(%rdi) /* RIP */ + + /* Push user RDI on the trampoline stack. */ + pushq (%rdi) + + /* + * We are on the trampoline stack. All regs except RDI are live. + * We can do future final exit work right here. + */ + + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi + + /* Restore RDI. */ + popq %rdi + SWAPGS + INTERRUPT_RETURN + + +/* Returning to kernel space */ +retint_kernel: +#ifdef CONFIG_PREEMPT + /* Interrupts are off */ + /* Check if we need preemption */ + btl $9, EFLAGS(%rsp) /* were interrupts off? */ + jnc 1f +0: cmpl $0, PER_CPU_VAR(__preempt_count) + jnz 1f + call preempt_schedule_irq + jmp 0b +1: +#endif + /* + * The iretq could re-enable interrupts: + */ + TRACE_IRQS_IRETQ + +GLOBAL(restore_regs_and_return_to_kernel) +#ifdef CONFIG_DEBUG_ENTRY + /* Assert that pt_regs indicates kernel mode. */ + testb $3, CS(%rsp) + jz 1f + ud2 +1: +#endif + POP_REGS + addq $8, %rsp /* skip regs->orig_ax */ + /* + * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization + * when returning from IPI handler. + */ + INTERRUPT_RETURN + +ENTRY(native_iret) + UNWIND_HINT_IRET_REGS + /* + * Are we returning to a stack segment from the LDT? Note: in + * 64-bit mode SS:RSP on the exception stack is always valid. + */ +#ifdef CONFIG_X86_ESPFIX64 + testb $4, (SS-RIP)(%rsp) + jnz native_irq_return_ldt +#endif + +.global native_irq_return_iret +native_irq_return_iret: + /* + * This may fault. Non-paranoid faults on return to userspace are + * handled by fixup_bad_iret. These include #SS, #GP, and #NP. + * Double-faults due to espfix64 are handled in do_double_fault. + * Other faults here are fatal. + */ + iretq + +#ifdef CONFIG_X86_ESPFIX64 +native_irq_return_ldt: + /* + * We are running with user GSBASE. All GPRs contain their user + * values. We have a percpu ESPFIX stack that is eight slots + * long (see ESPFIX_STACK_SIZE). espfix_waddr points to the bottom + * of the ESPFIX stack. + * + * We clobber RAX and RDI in this code. We stash RDI on the + * normal stack and RAX on the ESPFIX stack. + * + * The ESPFIX stack layout we set up looks like this: + * + * --- top of ESPFIX stack --- + * SS + * RSP + * RFLAGS + * CS + * RIP <-- RSP points here when we're done + * RAX <-- espfix_waddr points here + * --- bottom of ESPFIX stack --- + */ + + pushq %rdi /* Stash user RDI */ + SWAPGS /* to kernel GS */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi /* to kernel CR3 */ + + movq PER_CPU_VAR(espfix_waddr), %rdi + movq %rax, (0*8)(%rdi) /* user RAX */ + movq (1*8)(%rsp), %rax /* user RIP */ + movq %rax, (1*8)(%rdi) + movq (2*8)(%rsp), %rax /* user CS */ + movq %rax, (2*8)(%rdi) + movq (3*8)(%rsp), %rax /* user RFLAGS */ + movq %rax, (3*8)(%rdi) + movq (5*8)(%rsp), %rax /* user SS */ + movq %rax, (5*8)(%rdi) + movq (4*8)(%rsp), %rax /* user RSP */ + movq %rax, (4*8)(%rdi) + /* Now RAX == RSP. */ + + andl $0xffff0000, %eax /* RAX = (RSP & 0xffff0000) */ + + /* + * espfix_stack[31:16] == 0. The page tables are set up such that + * (espfix_stack | (X & 0xffff0000)) points to a read-only alias of + * espfix_waddr for any X. That is, there are 65536 RO aliases of + * the same page. Set up RSP so that RSP[31:16] contains the + * respective 16 bits of the /userspace/ RSP and RSP nonetheless + * still points to an RO alias of the ESPFIX stack. + */ + orq PER_CPU_VAR(espfix_stack), %rax + + SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi + SWAPGS /* to user GS */ + popq %rdi /* Restore user RDI */ + + movq %rax, %rsp + UNWIND_HINT_IRET_REGS offset=8 + + /* + * At this point, we cannot write to the stack any more, but we can + * still read. + */ + popq %rax /* Restore user RAX */ + + /* + * RSP now points to an ordinary IRET frame, except that the page + * is read-only and RSP[31:16] are preloaded with the userspace + * values. We can now IRET back to userspace. + */ + jmp native_irq_return_iret +#endif +END(common_interrupt) +_ASM_NOKPROBE(common_interrupt) + +/* + * APIC interrupts. + */ +.macro apicinterrupt3 num sym do_sym +ENTRY(\sym) + UNWIND_HINT_IRET_REGS + pushq $~(\num) +.Lcommon_\sym: + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call \do_sym /* rdi points to pt_regs */ + jmp ret_from_intr +END(\sym) +_ASM_NOKPROBE(\sym) +.endm + +/* Make sure APIC interrupt handlers end up in the irqentry section: */ +#define PUSH_SECTION_IRQENTRY .pushsection .irqentry.text, "ax" +#define POP_SECTION_IRQENTRY .popsection + +.macro apicinterrupt num sym do_sym +PUSH_SECTION_IRQENTRY +apicinterrupt3 \num \sym \do_sym +POP_SECTION_IRQENTRY +.endm + +#ifdef CONFIG_SMP +apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt +apicinterrupt3 REBOOT_VECTOR reboot_interrupt smp_reboot_interrupt +#endif + +#ifdef CONFIG_X86_UV +apicinterrupt3 UV_BAU_MESSAGE uv_bau_message_intr1 uv_bau_message_interrupt +#endif + +apicinterrupt LOCAL_TIMER_VECTOR apic_timer_interrupt smp_apic_timer_interrupt +apicinterrupt X86_PLATFORM_IPI_VECTOR x86_platform_ipi smp_x86_platform_ipi + +#ifdef CONFIG_HAVE_KVM +apicinterrupt3 POSTED_INTR_VECTOR kvm_posted_intr_ipi smp_kvm_posted_intr_ipi +apicinterrupt3 POSTED_INTR_WAKEUP_VECTOR kvm_posted_intr_wakeup_ipi smp_kvm_posted_intr_wakeup_ipi +apicinterrupt3 POSTED_INTR_NESTED_VECTOR kvm_posted_intr_nested_ipi smp_kvm_posted_intr_nested_ipi +#endif + +#ifdef CONFIG_X86_MCE_THRESHOLD +apicinterrupt THRESHOLD_APIC_VECTOR threshold_interrupt smp_threshold_interrupt +#endif + +#ifdef CONFIG_X86_MCE_AMD +apicinterrupt DEFERRED_ERROR_VECTOR deferred_error_interrupt smp_deferred_error_interrupt +#endif + +#ifdef CONFIG_X86_THERMAL_VECTOR +apicinterrupt THERMAL_APIC_VECTOR thermal_interrupt smp_thermal_interrupt +#endif + +#ifdef CONFIG_SMP +apicinterrupt CALL_FUNCTION_SINGLE_VECTOR call_function_single_interrupt smp_call_function_single_interrupt +apicinterrupt CALL_FUNCTION_VECTOR call_function_interrupt smp_call_function_interrupt +apicinterrupt RESCHEDULE_VECTOR reschedule_interrupt smp_reschedule_interrupt +#endif + +apicinterrupt ERROR_APIC_VECTOR error_interrupt smp_error_interrupt +apicinterrupt SPURIOUS_APIC_VECTOR spurious_interrupt smp_spurious_interrupt + +#ifdef CONFIG_IRQ_WORK +apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt +#endif + +/* + * Exception entry points. + */ +#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8) + +.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 create_gap=0 +ENTRY(\sym) + UNWIND_HINT_IRET_REGS offset=\has_error_code*8 + + /* Sanity check */ + .if \shift_ist != -1 && \paranoid == 0 + .error "using shift_ist requires paranoid=1" + .endif + + ASM_CLAC + + .if \has_error_code == 0 + pushq $-1 /* ORIG_RAX: no syscall to restart */ + .endif + + .if \paranoid == 1 + testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ + jnz .Lfrom_usermode_switch_stack_\@ + .endif + + .if \create_gap == 1 + /* + * If coming from kernel space, create a 6-word gap to allow the + * int3 handler to emulate a call instruction. + */ + testb $3, CS-ORIG_RAX(%rsp) + jnz .Lfrom_usermode_no_gap_\@ + .rept 6 + pushq 5*8(%rsp) + .endr + UNWIND_HINT_IRET_REGS offset=8 +.Lfrom_usermode_no_gap_\@: + .endif + + .if \paranoid + call paranoid_entry + .else + call error_entry + .endif + UNWIND_HINT_REGS + /* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */ + + .if \paranoid + .if \shift_ist != -1 + TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ + .else + TRACE_IRQS_OFF + .endif + .endif + + movq %rsp, %rdi /* pt_regs pointer */ + + .if \has_error_code + movq ORIG_RAX(%rsp), %rsi /* get error code */ + movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ + .else + xorl %esi, %esi /* no error code */ + .endif + + .if \shift_ist != -1 + subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist) + .endif + + call \do_sym + + .if \shift_ist != -1 + addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist) + .endif + + /* these procedures expect "no swapgs" flag in ebx */ + .if \paranoid + jmp paranoid_exit + .else + jmp error_exit + .endif + + .if \paranoid == 1 + /* + * Entry from userspace. Switch stacks and treat it + * as a normal entry. This means that paranoid handlers + * run in real process context if user_mode(regs). + */ +.Lfrom_usermode_switch_stack_\@: + call error_entry + + movq %rsp, %rdi /* pt_regs pointer */ + + .if \has_error_code + movq ORIG_RAX(%rsp), %rsi /* get error code */ + movq $-1, ORIG_RAX(%rsp) /* no syscall to restart */ + .else + xorl %esi, %esi /* no error code */ + .endif + + call \do_sym + + jmp error_exit + .endif +_ASM_NOKPROBE(\sym) +END(\sym) +.endm + +idtentry divide_error do_divide_error has_error_code=0 +idtentry overflow do_overflow has_error_code=0 +idtentry bounds do_bounds has_error_code=0 +idtentry invalid_op do_invalid_op has_error_code=0 +idtentry device_not_available do_device_not_available has_error_code=0 +idtentry double_fault do_double_fault has_error_code=1 paranoid=2 +idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 +idtentry invalid_TSS do_invalid_TSS has_error_code=1 +idtentry segment_not_present do_segment_not_present has_error_code=1 +idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 +idtentry coprocessor_error do_coprocessor_error has_error_code=0 +idtentry alignment_check do_alignment_check has_error_code=1 +idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 + + + /* + * Reload gs selector with exception handling + * edi: new selector + */ +ENTRY(native_load_gs_index) + FRAME_BEGIN + pushfq + DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) + TRACE_IRQS_OFF + SWAPGS +.Lgs_change: + movl %edi, %gs +2: ALTERNATIVE "", "mfence", X86_BUG_SWAPGS_FENCE + SWAPGS + TRACE_IRQS_FLAGS (%rsp) + popfq + FRAME_END + ret +ENDPROC(native_load_gs_index) +EXPORT_SYMBOL(native_load_gs_index) + + _ASM_EXTABLE(.Lgs_change, bad_gs) + .section .fixup, "ax" + /* running with kernelgs */ +bad_gs: + SWAPGS /* switch back to user gs */ +.macro ZAP_GS + /* This can't be a string because the preprocessor needs to see it. */ + movl $__USER_DS, %eax + movl %eax, %gs +.endm + ALTERNATIVE "", "ZAP_GS", X86_BUG_NULL_SEG + xorl %eax, %eax + movl %eax, %gs + jmp 2b + .previous + +/* Call softirq on interrupt stack. Interrupts are off. */ +ENTRY(do_softirq_own_stack) + pushq %rbp + mov %rsp, %rbp + ENTER_IRQ_STACK regs=0 old_rsp=%r11 + call __do_softirq + LEAVE_IRQ_STACK regs=0 + leaveq + ret +ENDPROC(do_softirq_own_stack) + +#ifdef CONFIG_XEN +idtentry hypervisor_callback xen_do_hypervisor_callback has_error_code=0 + +/* + * A note on the "critical region" in our callback handler. + * We want to avoid stacking callback handlers due to events occurring + * during handling of the last event. To do this, we keep events disabled + * until we've done all processing. HOWEVER, we must enable events before + * popping the stack frame (can't be done atomically) and so it would still + * be possible to get enough handler activations to overflow the stack. + * Although unlikely, bugs of that kind are hard to track down, so we'd + * like to avoid the possibility. + * So, on entry to the handler we detect whether we interrupted an + * existing activation in its critical region -- if so, we pop the current + * activation and restart the handler using the previous one. + */ +ENTRY(xen_do_hypervisor_callback) /* do_hypervisor_callback(struct *pt_regs) */ + +/* + * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will + * see the correct pointer to the pt_regs + */ + UNWIND_HINT_FUNC + movq %rdi, %rsp /* we don't return, adjust the stack frame */ + UNWIND_HINT_REGS + + ENTER_IRQ_STACK old_rsp=%r10 + call xen_evtchn_do_upcall + LEAVE_IRQ_STACK + +#ifndef CONFIG_PREEMPT + call xen_maybe_preempt_hcall +#endif + jmp error_exit +END(xen_do_hypervisor_callback) + +/* + * Hypervisor uses this for application faults while it executes. + * We get here for two reasons: + * 1. Fault while reloading DS, ES, FS or GS + * 2. Fault while executing IRET + * Category 1 we do not need to fix up as Xen has already reloaded all segment + * registers that could be reloaded and zeroed the others. + * Category 2 we fix up by killing the current process. We cannot use the + * normal Linux return path in this case because if we use the IRET hypercall + * to pop the stack frame we end up in an infinite loop of failsafe callbacks. + * We distinguish between categories by comparing each saved segment register + * with its current contents: any discrepancy means we in category 1. + */ +ENTRY(xen_failsafe_callback) + UNWIND_HINT_EMPTY + movl %ds, %ecx + cmpw %cx, 0x10(%rsp) + jne 1f + movl %es, %ecx + cmpw %cx, 0x18(%rsp) + jne 1f + movl %fs, %ecx + cmpw %cx, 0x20(%rsp) + jne 1f + movl %gs, %ecx + cmpw %cx, 0x28(%rsp) + jne 1f + /* All segments match their saved values => Category 2 (Bad IRET). */ + movq (%rsp), %rcx + movq 8(%rsp), %r11 + addq $0x30, %rsp + pushq $0 /* RIP */ + UNWIND_HINT_IRET_REGS offset=8 + jmp general_protection +1: /* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */ + movq (%rsp), %rcx + movq 8(%rsp), %r11 + addq $0x30, %rsp + UNWIND_HINT_IRET_REGS + pushq $-1 /* orig_ax = -1 => not a system call */ + PUSH_AND_CLEAR_REGS + ENCODE_FRAME_POINTER + jmp error_exit +END(xen_failsafe_callback) + +apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ + xen_hvm_callback_vector xen_evtchn_do_upcall + +#endif /* CONFIG_XEN */ + +#if IS_ENABLED(CONFIG_HYPERV) +apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ + hyperv_callback_vector hyperv_vector_handler + +apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ + hyperv_reenlightenment_vector hyperv_reenlightenment_intr + +apicinterrupt3 HYPERV_STIMER0_VECTOR \ + hv_stimer0_callback_vector hv_stimer0_vector_handler +#endif /* CONFIG_HYPERV */ + +idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry int3 do_int3 has_error_code=0 create_gap=1 +idtentry stack_segment do_stack_segment has_error_code=1 + +#ifdef CONFIG_XEN +idtentry xennmi do_nmi has_error_code=0 +idtentry xendebug do_debug has_error_code=0 +#endif + +idtentry general_protection do_general_protection has_error_code=1 +idtentry page_fault do_page_fault has_error_code=1 + +#ifdef CONFIG_KVM_GUEST +idtentry async_page_fault do_async_page_fault has_error_code=1 +#endif + +#ifdef CONFIG_X86_MCE +idtentry machine_check do_mce has_error_code=0 paranoid=1 +#endif + +/* + * Save all registers in pt_regs, and switch gs if needed. + * Use slow, but surefire "are we in kernel?" check. + * Return: ebx=0: need swapgs on exit, ebx=1: otherwise + */ +ENTRY(paranoid_entry) + UNWIND_HINT_FUNC + cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 + movl $1, %ebx + movl $MSR_GS_BASE, %ecx + rdmsr + testl %edx, %edx + js 1f /* negative -> in kernel */ + SWAPGS + xorl %ebx, %ebx + +1: + /* + * Always stash CR3 in %r14. This value will be restored, + * verbatim, at exit. Needed if paranoid_entry interrupted + * another entry that already switched to the user CR3 value + * but has not yet returned to userspace. + * + * This is also why CS (stashed in the "iret frame" by the + * hardware at entry) can not be used: this may be a return + * to kernel code, but with a user CR3 value. + */ + SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 + + /* + * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an + * unconditional CR3 write, even in the PTI case. So do an lfence + * to prevent GS speculation, regardless of whether PTI is enabled. + */ + FENCE_SWAPGS_KERNEL_ENTRY + + ret +END(paranoid_entry) + +/* + * "Paranoid" exit path from exception stack. This is invoked + * only on return from non-NMI IST interrupts that came + * from kernel space. + * + * We may be returning to very strange contexts (e.g. very early + * in syscall entry), so checking for preemption here would + * be complicated. Fortunately, we there's no good reason + * to try to handle preemption here. + * + * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) + */ +ENTRY(paranoid_exit) + UNWIND_HINT_REGS + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF_DEBUG + testl %ebx, %ebx /* swapgs needed? */ + jnz .Lparanoid_exit_no_swapgs + TRACE_IRQS_IRETQ + /* Always restore stashed CR3 value (see paranoid_entry) */ + RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 + SWAPGS_UNSAFE_STACK + jmp .Lparanoid_exit_restore +.Lparanoid_exit_no_swapgs: + TRACE_IRQS_IRETQ_DEBUG + /* Always restore stashed CR3 value (see paranoid_entry) */ + RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 +.Lparanoid_exit_restore: + jmp restore_regs_and_return_to_kernel +END(paranoid_exit) + +/* + * Save all registers in pt_regs, and switch GS if needed. + */ +ENTRY(error_entry) + UNWIND_HINT_FUNC + cld + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 + testb $3, CS+8(%rsp) + jz .Lerror_kernelspace + + /* + * We entered from user mode or we're pretending to have entered + * from user mode due to an IRET fault. + */ + SWAPGS + FENCE_SWAPGS_USER_ENTRY + /* We have user CR3. Change to kernel CR3. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + +.Lerror_entry_from_usermode_after_swapgs: + /* Put us onto the real thread stack. */ + popq %r12 /* save return addr in %12 */ + movq %rsp, %rdi /* arg0 = pt_regs pointer */ + call sync_regs + movq %rax, %rsp /* switch stack */ + ENCODE_FRAME_POINTER + pushq %r12 + + /* + * We need to tell lockdep that IRQs are off. We can't do this until + * we fix gsbase, and we should do it before enter_from_user_mode + * (which can take locks). + */ + TRACE_IRQS_OFF + CALL_enter_from_user_mode + ret + +.Lerror_entry_done_lfence: + FENCE_SWAPGS_KERNEL_ENTRY +.Lerror_entry_done: + TRACE_IRQS_OFF + ret + + /* + * There are two places in the kernel that can potentially fault with + * usergs. Handle them here. B stepping K8s sometimes report a + * truncated RIP for IRET exceptions returning to compat mode. Check + * for these here too. + */ +.Lerror_kernelspace: + leaq native_irq_return_iret(%rip), %rcx + cmpq %rcx, RIP+8(%rsp) + je .Lerror_bad_iret + movl %ecx, %eax /* zero extend */ + cmpq %rax, RIP+8(%rsp) + je .Lbstep_iret + cmpq $.Lgs_change, RIP+8(%rsp) + jne .Lerror_entry_done_lfence + + /* + * hack: .Lgs_change can fail with user gsbase. If this happens, fix up + * gsbase and proceed. We'll fix up the exception and land in + * .Lgs_change's error handler with kernel gsbase. + */ + SWAPGS + FENCE_SWAPGS_USER_ENTRY + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + jmp .Lerror_entry_done + +.Lbstep_iret: + /* Fix truncated RIP */ + movq %rcx, RIP+8(%rsp) + /* fall through */ + +.Lerror_bad_iret: + /* + * We came from an IRET to user mode, so we have user + * gsbase and CR3. Switch to kernel gsbase and CR3: + */ + SWAPGS + FENCE_SWAPGS_USER_ENTRY + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax + + /* + * Pretend that the exception came from user mode: set up pt_regs + * as if we faulted immediately after IRET. + */ + mov %rsp, %rdi + call fixup_bad_iret + mov %rax, %rsp + jmp .Lerror_entry_from_usermode_after_swapgs +END(error_entry) + +ENTRY(error_exit) + UNWIND_HINT_REGS + DISABLE_INTERRUPTS(CLBR_ANY) + TRACE_IRQS_OFF + testb $3, CS(%rsp) + jz retint_kernel + jmp retint_user +END(error_exit) + +/* + * Runs on exception stack. Xen PV does not go through this path at all, + * so we can use real assembly here. + * + * Registers: + * %r14: Used to save/restore the CR3 of the interrupted context + * when PAGE_TABLE_ISOLATION is in use. Do not clobber. + */ +ENTRY(nmi) + UNWIND_HINT_IRET_REGS + + /* + * We allow breakpoints in NMIs. If a breakpoint occurs, then + * the iretq it performs will take us out of NMI context. + * This means that we can have nested NMIs where the next + * NMI is using the top of the stack of the previous NMI. We + * can't let it execute because the nested NMI will corrupt the + * stack of the previous NMI. NMI handlers are not re-entrant + * anyway. + * + * To handle this case we do the following: + * Check the a special location on the stack that contains + * a variable that is set when NMIs are executing. + * The interrupted task's stack is also checked to see if it + * is an NMI stack. + * If the variable is not set and the stack is not the NMI + * stack then: + * o Set the special variable on the stack + * o Copy the interrupt frame into an "outermost" location on the + * stack + * o Copy the interrupt frame into an "iret" location on the stack + * o Continue processing the NMI + * If the variable is set or the previous stack is the NMI stack: + * o Modify the "iret" location to jump to the repeat_nmi + * o return back to the first NMI + * + * Now on exit of the first NMI, we first clear the stack variable + * The NMI stack will tell any nested NMIs at that point that it is + * nested. Then we pop the stack normally with iret, and if there was + * a nested NMI that updated the copy interrupt stack frame, a + * jump will be made to the repeat_nmi code that will handle the second + * NMI. + * + * However, espfix prevents us from directly returning to userspace + * with a single IRET instruction. Similarly, IRET to user mode + * can fault. We therefore handle NMIs from user space like + * other IST entries. + */ + + ASM_CLAC + + /* Use %rdx as our temp variable throughout */ + pushq %rdx + + testb $3, CS-RIP+8(%rsp) + jz .Lnmi_from_kernel + + /* + * NMI from user mode. We need to run on the thread stack, but we + * can't go through the normal entry paths: NMIs are masked, and + * we don't want to enable interrupts, because then we'll end + * up in an awkward situation in which IRQs are on but NMIs + * are off. + * + * We also must not push anything to the stack before switching + * stacks lest we corrupt the "NMI executing" variable. + */ + + swapgs + cld + FENCE_SWAPGS_USER_ENTRY + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx + movq %rsp, %rdx + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + UNWIND_HINT_IRET_REGS base=%rdx offset=8 + pushq 5*8(%rdx) /* pt_regs->ss */ + pushq 4*8(%rdx) /* pt_regs->rsp */ + pushq 3*8(%rdx) /* pt_regs->flags */ + pushq 2*8(%rdx) /* pt_regs->cs */ + pushq 1*8(%rdx) /* pt_regs->rip */ + UNWIND_HINT_IRET_REGS + pushq $-1 /* pt_regs->orig_ax */ + PUSH_AND_CLEAR_REGS rdx=(%rdx) + ENCODE_FRAME_POINTER + + /* + * At this point we no longer need to worry about stack damage + * due to nesting -- we're on the normal thread stack and we're + * done with the NMI stack. + */ + + movq %rsp, %rdi + movq $-1, %rsi + call do_nmi + + /* + * Return back to user mode. We must *not* do the normal exit + * work, because we don't want to enable interrupts. + */ + jmp swapgs_restore_regs_and_return_to_usermode + +.Lnmi_from_kernel: + /* + * Here's what our stack frame will look like: + * +---------------------------------------------------------+ + * | original SS | + * | original Return RSP | + * | original RFLAGS | + * | original CS | + * | original RIP | + * +---------------------------------------------------------+ + * | temp storage for rdx | + * +---------------------------------------------------------+ + * | "NMI executing" variable | + * +---------------------------------------------------------+ + * | iret SS } Copied from "outermost" frame | + * | iret Return RSP } on each loop iteration; overwritten | + * | iret RFLAGS } by a nested NMI to force another | + * | iret CS } iteration if needed. | + * | iret RIP } | + * +---------------------------------------------------------+ + * | outermost SS } initialized in first_nmi; | + * | outermost Return RSP } will not be changed before | + * | outermost RFLAGS } NMI processing is done. | + * | outermost CS } Copied to "iret" frame on each | + * | outermost RIP } iteration. | + * +---------------------------------------------------------+ + * | pt_regs | + * +---------------------------------------------------------+ + * + * The "original" frame is used by hardware. Before re-enabling + * NMIs, we need to be done with it, and we need to leave enough + * space for the asm code here. + * + * We return by executing IRET while RSP points to the "iret" frame. + * That will either return for real or it will loop back into NMI + * processing. + * + * The "outermost" frame is copied to the "iret" frame on each + * iteration of the loop, so each iteration starts with the "iret" + * frame pointing to the final return target. + */ + + /* + * Determine whether we're a nested NMI. + * + * If we interrupted kernel code between repeat_nmi and + * end_repeat_nmi, then we are a nested NMI. We must not + * modify the "iret" frame because it's being written by + * the outer NMI. That's okay; the outer NMI handler is + * about to about to call do_nmi anyway, so we can just + * resume the outer NMI. + */ + + movq $repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja 1f + movq $end_repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja nested_nmi_out +1: + + /* + * Now check "NMI executing". If it's set, then we're nested. + * This will not detect if we interrupted an outer NMI just + * before IRET. + */ + cmpl $1, -8(%rsp) + je nested_nmi + + /* + * Now test if the previous stack was an NMI stack. This covers + * the case where we interrupt an outer NMI after it clears + * "NMI executing" but before IRET. We need to be careful, though: + * there is one case in which RSP could point to the NMI stack + * despite there being no NMI active: naughty userspace controls + * RSP at the very beginning of the SYSCALL targets. We can + * pull a fast one on naughty userspace, though: we program + * SYSCALL to mask DF, so userspace cannot cause DF to be set + * if it controls the kernel's RSP. We set DF before we clear + * "NMI executing". + */ + lea 6*8(%rsp), %rdx + /* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */ + cmpq %rdx, 4*8(%rsp) + /* If the stack pointer is above the NMI stack, this is a normal NMI */ + ja first_nmi + + subq $EXCEPTION_STKSZ, %rdx + cmpq %rdx, 4*8(%rsp) + /* If it is below the NMI stack, it is a normal NMI */ + jb first_nmi + + /* Ah, it is within the NMI stack. */ + + testb $(X86_EFLAGS_DF >> 8), (3*8 + 1)(%rsp) + jz first_nmi /* RSP was user controlled. */ + + /* This is a nested NMI. */ + +nested_nmi: + /* + * Modify the "iret" frame to point to repeat_nmi, forcing another + * iteration of NMI handling. + */ + subq $8, %rsp + leaq -10*8(%rsp), %rdx + pushq $__KERNEL_DS + pushq %rdx + pushfq + pushq $__KERNEL_CS + pushq $repeat_nmi + + /* Put stack back */ + addq $(6*8), %rsp + +nested_nmi_out: + popq %rdx + + /* We are returning to kernel mode, so this cannot result in a fault. */ + iretq + +first_nmi: + /* Restore rdx. */ + movq (%rsp), %rdx + + /* Make room for "NMI executing". */ + pushq $0 + + /* Leave room for the "iret" frame */ + subq $(5*8), %rsp + + /* Copy the "original" frame to the "outermost" frame */ + .rept 5 + pushq 11*8(%rsp) + .endr + UNWIND_HINT_IRET_REGS + + /* Everything up to here is safe from nested NMIs */ + +#ifdef CONFIG_DEBUG_ENTRY + /* + * For ease of testing, unmask NMIs right away. Disabled by + * default because IRET is very expensive. + */ + pushq $0 /* SS */ + pushq %rsp /* RSP (minus 8 because of the previous push) */ + addq $8, (%rsp) /* Fix up RSP */ + pushfq /* RFLAGS */ + pushq $__KERNEL_CS /* CS */ + pushq $1f /* RIP */ + iretq /* continues at repeat_nmi below */ + UNWIND_HINT_IRET_REGS +1: +#endif + +repeat_nmi: + /* + * If there was a nested NMI, the first NMI's iret will return + * here. But NMIs are still enabled and we can take another + * nested NMI. The nested NMI checks the interrupted RIP to see + * if it is between repeat_nmi and end_repeat_nmi, and if so + * it will just return, as we are about to repeat an NMI anyway. + * This makes it safe to copy to the stack frame that a nested + * NMI will update. + * + * RSP is pointing to "outermost RIP". gsbase is unknown, but, if + * we're repeating an NMI, gsbase has the same value that it had on + * the first iteration. paranoid_entry will load the kernel + * gsbase if needed before we call do_nmi. "NMI executing" + * is zero. + */ + movq $1, 10*8(%rsp) /* Set "NMI executing". */ + + /* + * Copy the "outermost" frame to the "iret" frame. NMIs that nest + * here must not modify the "iret" frame while we're writing to + * it or it will end up containing garbage. + */ + addq $(10*8), %rsp + .rept 5 + pushq -6*8(%rsp) + .endr + subq $(5*8), %rsp +end_repeat_nmi: + + /* + * Everything below this point can be preempted by a nested NMI. + * If this happens, then the inner NMI will change the "iret" + * frame to point back to repeat_nmi. + */ + pushq $-1 /* ORIG_RAX: no syscall to restart */ + + /* + * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit + * as we should not be calling schedule in NMI context. + * Even with normal interrupts enabled. An NMI should not be + * setting NEED_RESCHED or anything that normal interrupts and + * exceptions might do. + */ + call paranoid_entry + UNWIND_HINT_REGS + + /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ + movq %rsp, %rdi + movq $-1, %rsi + call do_nmi + + /* Always restore stashed CR3 value (see paranoid_entry) */ + RESTORE_CR3 scratch_reg=%r15 save_reg=%r14 + + testl %ebx, %ebx /* swapgs needed? */ + jnz nmi_restore +nmi_swapgs: + SWAPGS_UNSAFE_STACK +nmi_restore: + POP_REGS + + /* + * Skip orig_ax and the "outermost" frame to point RSP at the "iret" + * at the "iret" frame. + */ + addq $6*8, %rsp + + /* + * Clear "NMI executing". Set DF first so that we can easily + * distinguish the remaining code between here and IRET from + * the SYSCALL entry and exit paths. + * + * We arguably should just inspect RIP instead, but I (Andy) wrote + * this code when I had the misapprehension that Xen PV supported + * NMIs, and Xen PV would break that approach. + */ + std + movq $0, 5*8(%rsp) /* clear "NMI executing" */ + + /* + * iretq reads the "iret" frame and exits the NMI stack in a + * single instruction. We are returning to kernel mode, so this + * cannot result in a fault. Similarly, we don't need to worry + * about espfix64 on the way back to kernel mode. + */ + iretq +END(nmi) + +ENTRY(ignore_sysret) + UNWIND_HINT_EMPTY + mov $-ENOSYS, %eax + sysret +END(ignore_sysret) + +ENTRY(rewind_stack_do_exit) + UNWIND_HINT_FUNC + /* Prevent any naive code from trying to unwind to our caller. */ + xorl %ebp, %ebp + + movq PER_CPU_VAR(cpu_current_top_of_stack), %rax + leaq -PTREGS_SIZE(%rax), %rsp + UNWIND_HINT_REGS + + call do_exit +END(rewind_stack_do_exit) -- cgit v1.2.3