From 08b74a000942a380fe028845f92cd3a0dee827d5 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:38 +0200 Subject: Adding debian version 4.19.249-2. Signed-off-by: Daniel Baumann --- ...-drivers-Add-a-new-driver-for-the-Atmel-A.patch | 485 +++++++++++++++++++++ 1 file changed, 485 insertions(+) create mode 100644 debian/patches-rt/0002-clocksource-drivers-Add-a-new-driver-for-the-Atmel-A.patch (limited to 'debian/patches-rt/0002-clocksource-drivers-Add-a-new-driver-for-the-Atmel-A.patch') diff --git a/debian/patches-rt/0002-clocksource-drivers-Add-a-new-driver-for-the-Atmel-A.patch b/debian/patches-rt/0002-clocksource-drivers-Add-a-new-driver-for-the-Atmel-A.patch new file mode 100644 index 000000000..6f8c04a6c --- /dev/null +++ b/debian/patches-rt/0002-clocksource-drivers-Add-a-new-driver-for-the-Atmel-A.patch @@ -0,0 +1,485 @@ +From ad55e9aff22686f2ddf3d898aac7aef214a5ed82 Mon Sep 17 00:00:00 2001 +From: Alexandre Belloni +Date: Thu, 13 Sep 2018 13:30:19 +0200 +Subject: [PATCH 002/347] clocksource/drivers: Add a new driver for the Atmel + ARM TC blocks +Origin: https://www.kernel.org/pub/linux/kernel/projects/rt/4.19/older/patches-4.19.246-rt110.tar.xz + +Add a driver for the Atmel Timer Counter Blocks. This driver provides a +clocksource and two clockevent devices. + +One of the clockevent device is linked to the clocksource counter and so it +will run at the same frequency. This will be used when there is only on TCB +channel available for timers. + +The other clockevent device runs on a separate TCB channel when available. + +This driver uses regmap and syscon to be able to probe early in the boot +and avoid having to switch on the TCB clocksource later. Using regmap also +means that unused TCB channels may be used by other drivers (PWM for +example). read/writel are still used to access channel specific registers +to avoid the performance impact of regmap (mainly locking). + +Tested-by: Alexander Dahl +Tested-by: Andras Szemzo +Signed-off-by: Alexandre Belloni +Signed-off-by: Sebastian Andrzej Siewior +--- + drivers/clocksource/Kconfig | 8 + + drivers/clocksource/Makefile | 3 +- + drivers/clocksource/timer-atmel-tcb.c | 410 ++++++++++++++++++++++++++ + 3 files changed, 420 insertions(+), 1 deletion(-) + create mode 100644 drivers/clocksource/timer-atmel-tcb.c + +diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig +index 06504384c376..9422ea3a52ac 100644 +--- a/drivers/clocksource/Kconfig ++++ b/drivers/clocksource/Kconfig +@@ -416,6 +416,14 @@ config ATMEL_ST + help + Support for the Atmel ST timer. + ++config ATMEL_ARM_TCB_CLKSRC ++ bool "Microchip ARM TC Block" if COMPILE_TEST ++ select REGMAP_MMIO ++ depends on GENERIC_CLOCKEVENTS ++ help ++ This enables build of clocksource and clockevent driver for ++ the integrated Timer Counter Blocks in Microchip ARM SoCs. ++ + config CLKSRC_EXYNOS_MCT + bool "Exynos multi core timer driver" if COMPILE_TEST + depends on ARM || ARM64 +diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile +index db51b2427e8a..0df9384a1230 100644 +--- a/drivers/clocksource/Makefile ++++ b/drivers/clocksource/Makefile +@@ -3,7 +3,8 @@ obj-$(CONFIG_TIMER_OF) += timer-of.o + obj-$(CONFIG_TIMER_PROBE) += timer-probe.o + obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o + obj-$(CONFIG_ATMEL_ST) += timer-atmel-st.o +-obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o ++obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o ++obj-$(CONFIG_ATMEL_ARM_TCB_CLKSRC) += timer-atmel-tcb.o + obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o + obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o + obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o +diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c +new file mode 100644 +index 000000000000..21fbe430f91b +--- /dev/null ++++ b/drivers/clocksource/timer-atmel-tcb.c +@@ -0,0 +1,410 @@ ++// SPDX-License-Identifier: GPL-2.0 ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct atmel_tcb_clksrc { ++ struct clocksource clksrc; ++ struct clock_event_device clkevt; ++ struct regmap *regmap; ++ void __iomem *base; ++ struct clk *clk[2]; ++ char name[20]; ++ int channels[2]; ++ int bits; ++ int irq; ++ struct { ++ u32 cmr; ++ u32 imr; ++ u32 rc; ++ bool clken; ++ } cache[2]; ++ u32 bmr_cache; ++ bool registered; ++ bool clk_enabled; ++}; ++ ++static struct atmel_tcb_clksrc tc; ++ ++static struct clk *tcb_clk_get(struct device_node *node, int channel) ++{ ++ struct clk *clk; ++ char clk_name[] = "t0_clk"; ++ ++ clk_name[1] += channel; ++ clk = of_clk_get_by_name(node->parent, clk_name); ++ if (!IS_ERR(clk)) ++ return clk; ++ ++ return of_clk_get_by_name(node->parent, "t0_clk"); ++} ++ ++/* ++ * Clocksource and clockevent using the same channel(s) ++ */ ++static u64 tc_get_cycles(struct clocksource *cs) ++{ ++ u32 lower, upper; ++ ++ do { ++ upper = readl_relaxed(tc.base + ATMEL_TC_CV(tc.channels[1])); ++ lower = readl_relaxed(tc.base + ATMEL_TC_CV(tc.channels[0])); ++ } while (upper != readl_relaxed(tc.base + ATMEL_TC_CV(tc.channels[1]))); ++ ++ return (upper << 16) | lower; ++} ++ ++static u64 tc_get_cycles32(struct clocksource *cs) ++{ ++ return readl_relaxed(tc.base + ATMEL_TC_CV(tc.channels[0])); ++} ++ ++static u64 notrace tc_sched_clock_read(void) ++{ ++ return tc_get_cycles(&tc.clksrc); ++} ++ ++static u64 notrace tc_sched_clock_read32(void) ++{ ++ return tc_get_cycles32(&tc.clksrc); ++} ++ ++static int tcb_clkevt_next_event(unsigned long delta, ++ struct clock_event_device *d) ++{ ++ u32 old, next, cur; ++ ++ old = readl(tc.base + ATMEL_TC_CV(tc.channels[0])); ++ next = old + delta; ++ writel(next, tc.base + ATMEL_TC_RC(tc.channels[0])); ++ cur = readl(tc.base + ATMEL_TC_CV(tc.channels[0])); ++ ++ /* check whether the delta elapsed while setting the register */ ++ if ((next < old && cur < old && cur > next) || ++ (next > old && (cur < old || cur > next))) { ++ /* ++ * Clear the CPCS bit in the status register to avoid ++ * generating a spurious interrupt next time a valid ++ * timer event is configured. ++ */ ++ old = readl(tc.base + ATMEL_TC_SR(tc.channels[0])); ++ return -ETIME; ++ } ++ ++ writel(ATMEL_TC_CPCS, tc.base + ATMEL_TC_IER(tc.channels[0])); ++ ++ return 0; ++} ++ ++static irqreturn_t tc_clkevt_irq(int irq, void *handle) ++{ ++ unsigned int sr; ++ ++ sr = readl(tc.base + ATMEL_TC_SR(tc.channels[0])); ++ if (sr & ATMEL_TC_CPCS) { ++ tc.clkevt.event_handler(&tc.clkevt); ++ return IRQ_HANDLED; ++ } ++ ++ return IRQ_NONE; ++} ++ ++static int tcb_clkevt_oneshot(struct clock_event_device *dev) ++{ ++ if (clockevent_state_oneshot(dev)) ++ return 0; ++ ++ /* ++ * Because both clockevent devices may share the same IRQ, we don't want ++ * the less likely one to stay requested ++ */ ++ return request_irq(tc.irq, tc_clkevt_irq, IRQF_TIMER | IRQF_SHARED, ++ tc.name, &tc); ++} ++ ++static int tcb_clkevt_shutdown(struct clock_event_device *dev) ++{ ++ writel(0xff, tc.base + ATMEL_TC_IDR(tc.channels[0])); ++ if (tc.bits == 16) ++ writel(0xff, tc.base + ATMEL_TC_IDR(tc.channels[1])); ++ ++ if (!clockevent_state_detached(dev)) ++ free_irq(tc.irq, &tc); ++ ++ return 0; ++} ++ ++static void __init tcb_setup_dual_chan(struct atmel_tcb_clksrc *tc, ++ int mck_divisor_idx) ++{ ++ /* first channel: waveform mode, input mclk/8, clock TIOA on overflow */ ++ writel(mck_divisor_idx /* likely divide-by-8 */ ++ | ATMEL_TC_CMR_WAVE ++ | ATMEL_TC_CMR_WAVESEL_UP /* free-run */ ++ | ATMEL_TC_CMR_ACPA(SET) /* TIOA rises at 0 */ ++ | ATMEL_TC_CMR_ACPC(CLEAR), /* (duty cycle 50%) */ ++ tc->base + ATMEL_TC_CMR(tc->channels[0])); ++ writel(0x0000, tc->base + ATMEL_TC_RA(tc->channels[0])); ++ writel(0x8000, tc->base + ATMEL_TC_RC(tc->channels[0])); ++ writel(0xff, tc->base + ATMEL_TC_IDR(tc->channels[0])); /* no irqs */ ++ writel(ATMEL_TC_CCR_CLKEN, tc->base + ATMEL_TC_CCR(tc->channels[0])); ++ ++ /* second channel: waveform mode, input TIOA */ ++ writel(ATMEL_TC_CMR_XC(tc->channels[1]) /* input: TIOA */ ++ | ATMEL_TC_CMR_WAVE ++ | ATMEL_TC_CMR_WAVESEL_UP, /* free-run */ ++ tc->base + ATMEL_TC_CMR(tc->channels[1])); ++ writel(0xff, tc->base + ATMEL_TC_IDR(tc->channels[1])); /* no irqs */ ++ writel(ATMEL_TC_CCR_CLKEN, tc->base + ATMEL_TC_CCR(tc->channels[1])); ++ ++ /* chain both channel, we assume the previous channel */ ++ regmap_write(tc->regmap, ATMEL_TC_BMR, ++ ATMEL_TC_BMR_TCXC(1 + tc->channels[1], tc->channels[1])); ++ /* then reset all the timers */ ++ regmap_write(tc->regmap, ATMEL_TC_BCR, ATMEL_TC_BCR_SYNC); ++} ++ ++static void __init tcb_setup_single_chan(struct atmel_tcb_clksrc *tc, ++ int mck_divisor_idx) ++{ ++ /* channel 0: waveform mode, input mclk/8 */ ++ writel(mck_divisor_idx /* likely divide-by-8 */ ++ | ATMEL_TC_CMR_WAVE ++ | ATMEL_TC_CMR_WAVESEL_UP, /* free-run */ ++ tc->base + ATMEL_TC_CMR(tc->channels[0])); ++ writel(0xff, tc->base + ATMEL_TC_IDR(tc->channels[0])); /* no irqs */ ++ writel(ATMEL_TC_CCR_CLKEN, tc->base + ATMEL_TC_CCR(tc->channels[0])); ++ ++ /* then reset all the timers */ ++ regmap_write(tc->regmap, ATMEL_TC_BCR, ATMEL_TC_BCR_SYNC); ++} ++ ++static void tc_clksrc_suspend(struct clocksource *cs) ++{ ++ int i; ++ ++ for (i = 0; i < 1 + (tc.bits == 16); i++) { ++ tc.cache[i].cmr = readl(tc.base + ATMEL_TC_CMR(tc.channels[i])); ++ tc.cache[i].imr = readl(tc.base + ATMEL_TC_IMR(tc.channels[i])); ++ tc.cache[i].rc = readl(tc.base + ATMEL_TC_RC(tc.channels[i])); ++ tc.cache[i].clken = !!(readl(tc.base + ++ ATMEL_TC_SR(tc.channels[i])) & ++ ATMEL_TC_CLKSTA); ++ } ++ ++ if (tc.bits == 16) ++ regmap_read(tc.regmap, ATMEL_TC_BMR, &tc.bmr_cache); ++} ++ ++static void tc_clksrc_resume(struct clocksource *cs) ++{ ++ int i; ++ ++ for (i = 0; i < 1 + (tc.bits == 16); i++) { ++ /* Restore registers for the channel, RA and RB are not used */ ++ writel(tc.cache[i].cmr, tc.base + ATMEL_TC_CMR(tc.channels[i])); ++ writel(tc.cache[i].rc, tc.base + ATMEL_TC_RC(tc.channels[i])); ++ writel(0, tc.base + ATMEL_TC_RA(tc.channels[i])); ++ writel(0, tc.base + ATMEL_TC_RB(tc.channels[i])); ++ /* Disable all the interrupts */ ++ writel(0xff, tc.base + ATMEL_TC_IDR(tc.channels[i])); ++ /* Reenable interrupts that were enabled before suspending */ ++ writel(tc.cache[i].imr, tc.base + ATMEL_TC_IER(tc.channels[i])); ++ ++ /* Start the clock if it was used */ ++ if (tc.cache[i].clken) ++ writel(ATMEL_TC_CCR_CLKEN, tc.base + ++ ATMEL_TC_CCR(tc.channels[i])); ++ } ++ ++ /* in case of dual channel, chain channels */ ++ if (tc.bits == 16) ++ regmap_write(tc.regmap, ATMEL_TC_BMR, tc.bmr_cache); ++ /* Finally, trigger all the channels*/ ++ regmap_write(tc.regmap, ATMEL_TC_BCR, ATMEL_TC_BCR_SYNC); ++} ++ ++static int __init tcb_clksrc_register(struct device_node *node, ++ struct regmap *regmap, void __iomem *base, ++ int channel, int channel1, int irq, ++ int bits) ++{ ++ u32 rate, divided_rate = 0; ++ int best_divisor_idx = -1; ++ int i, err = -1; ++ u64 (*tc_sched_clock)(void); ++ ++ tc.regmap = regmap; ++ tc.base = base; ++ tc.channels[0] = channel; ++ tc.channels[1] = channel1; ++ tc.irq = irq; ++ tc.bits = bits; ++ ++ tc.clk[0] = tcb_clk_get(node, tc.channels[0]); ++ if (IS_ERR(tc.clk[0])) ++ return PTR_ERR(tc.clk[0]); ++ err = clk_prepare_enable(tc.clk[0]); ++ if (err) { ++ pr_debug("can't enable T0 clk\n"); ++ goto err_clk; ++ } ++ ++ /* How fast will we be counting? Pick something over 5 MHz. */ ++ rate = (u32)clk_get_rate(tc.clk[0]); ++ for (i = 0; i < 5; i++) { ++ unsigned int divisor = atmel_tc_divisors[i]; ++ unsigned int tmp; ++ ++ if (!divisor) ++ continue; ++ ++ tmp = rate / divisor; ++ pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp); ++ if (best_divisor_idx > 0) { ++ if (tmp < 5 * 1000 * 1000) ++ continue; ++ } ++ divided_rate = tmp; ++ best_divisor_idx = i; ++ } ++ ++ if (tc.bits == 32) { ++ tc.clksrc.read = tc_get_cycles32; ++ tcb_setup_single_chan(&tc, best_divisor_idx); ++ tc_sched_clock = tc_sched_clock_read32; ++ snprintf(tc.name, sizeof(tc.name), "%s:%d", ++ kbasename(node->parent->full_name), tc.channels[0]); ++ } else { ++ tc.clk[1] = tcb_clk_get(node, tc.channels[1]); ++ if (IS_ERR(tc.clk[1])) ++ goto err_disable_t0; ++ ++ err = clk_prepare_enable(tc.clk[1]); ++ if (err) { ++ pr_debug("can't enable T1 clk\n"); ++ goto err_clk1; ++ } ++ tc.clksrc.read = tc_get_cycles, ++ tcb_setup_dual_chan(&tc, best_divisor_idx); ++ tc_sched_clock = tc_sched_clock_read; ++ snprintf(tc.name, sizeof(tc.name), "%s:%d,%d", ++ kbasename(node->parent->full_name), tc.channels[0], ++ tc.channels[1]); ++ } ++ ++ pr_debug("%s at %d.%03d MHz\n", tc.name, ++ divided_rate / 1000000, ++ ((divided_rate + 500000) % 1000000) / 1000); ++ ++ tc.clksrc.name = tc.name; ++ tc.clksrc.suspend = tc_clksrc_suspend; ++ tc.clksrc.resume = tc_clksrc_resume; ++ tc.clksrc.rating = 200; ++ tc.clksrc.mask = CLOCKSOURCE_MASK(32); ++ tc.clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS; ++ ++ err = clocksource_register_hz(&tc.clksrc, divided_rate); ++ if (err) ++ goto err_disable_t1; ++ ++ sched_clock_register(tc_sched_clock, 32, divided_rate); ++ ++ tc.registered = true; ++ ++ /* Set up and register clockevents */ ++ tc.clkevt.name = tc.name; ++ tc.clkevt.cpumask = cpumask_of(0); ++ tc.clkevt.set_next_event = tcb_clkevt_next_event; ++ tc.clkevt.set_state_oneshot = tcb_clkevt_oneshot; ++ tc.clkevt.set_state_shutdown = tcb_clkevt_shutdown; ++ tc.clkevt.features = CLOCK_EVT_FEAT_ONESHOT; ++ tc.clkevt.rating = 125; ++ ++ clockevents_config_and_register(&tc.clkevt, divided_rate, 1, ++ BIT(tc.bits) - 1); ++ ++ return 0; ++ ++err_disable_t1: ++ if (tc.bits == 16) ++ clk_disable_unprepare(tc.clk[1]); ++ ++err_clk1: ++ if (tc.bits == 16) ++ clk_put(tc.clk[1]); ++ ++err_disable_t0: ++ clk_disable_unprepare(tc.clk[0]); ++ ++err_clk: ++ clk_put(tc.clk[0]); ++ ++ pr_err("%s: unable to register clocksource/clockevent\n", ++ tc.clksrc.name); ++ ++ return err; ++} ++ ++static int __init tcb_clksrc_init(struct device_node *node) ++{ ++ const struct of_device_id *match; ++ struct regmap *regmap; ++ void __iomem *tcb_base; ++ u32 channel; ++ int irq, err, chan1 = -1; ++ unsigned bits; ++ ++ if (tc.registered) ++ return -ENODEV; ++ ++ /* ++ * The regmap has to be used to access registers that are shared ++ * between channels on the same TCB but we keep direct IO access for ++ * the counters to avoid the impact on performance ++ */ ++ regmap = syscon_node_to_regmap(node->parent); ++ if (IS_ERR(regmap)) ++ return PTR_ERR(regmap); ++ ++ tcb_base = of_iomap(node->parent, 0); ++ if (!tcb_base) { ++ pr_err("%s +%d %s\n", __FILE__, __LINE__, __func__); ++ return -ENXIO; ++ } ++ ++ match = of_match_node(atmel_tcb_dt_ids, node->parent); ++ bits = (uintptr_t)match->data; ++ ++ err = of_property_read_u32_index(node, "reg", 0, &channel); ++ if (err) ++ return err; ++ ++ irq = of_irq_get(node->parent, channel); ++ if (irq < 0) { ++ irq = of_irq_get(node->parent, 0); ++ if (irq < 0) ++ return irq; ++ } ++ ++ if (bits == 16) { ++ of_property_read_u32_index(node, "reg", 1, &chan1); ++ if (chan1 == -1) { ++ pr_err("%s: clocksource needs two channels\n", ++ node->parent->full_name); ++ return -EINVAL; ++ } ++ } ++ ++ return tcb_clksrc_register(node, regmap, tcb_base, channel, chan1, irq, ++ bits); ++} ++TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init); +-- +2.36.1 + -- cgit v1.2.3