From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/clk/Kconfig | 303 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 303 insertions(+) create mode 100644 drivers/clk/Kconfig (limited to 'drivers/clk/Kconfig') diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig new file mode 100644 index 000000000..292056bbb --- /dev/null +++ b/drivers/clk/Kconfig @@ -0,0 +1,303 @@ + +config CLKDEV_LOOKUP + bool + select HAVE_CLK + +config HAVE_CLK_PREPARE + bool + +config COMMON_CLK + bool + select HAVE_CLK_PREPARE + select CLKDEV_LOOKUP + select SRCU + select RATIONAL + ---help--- + The common clock framework is a single definition of struct + clk, useful across many platforms, as well as an + implementation of the clock API in include/linux/clk.h. + Architectures utilizing the common struct clk should select + this option. + +menu "Common Clock Framework" + depends on COMMON_CLK + +config COMMON_CLK_WM831X + tristate "Clock driver for WM831x/2x PMICs" + depends on MFD_WM831X + ---help--- + Supports the clocking subsystem of the WM831x/2x series of + PMICs from Wolfson Microelectronics. + +source "drivers/clk/versatile/Kconfig" + +config CLK_HSDK + bool "PLL Driver for HSDK platform" + depends on OF || COMPILE_TEST + ---help--- + This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs + control. + +config COMMON_CLK_MAX77686 + tristate "Clock driver for Maxim 77620/77686/77802 MFD" + depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST + ---help--- + This driver supports Maxim 77620/77686/77802 crystal oscillator + clock. + +config COMMON_CLK_MAX9485 + tristate "Maxim 9485 Programmable Clock Generator" + depends on I2C + help + This driver supports Maxim 9485 Programmable Audio Clock Generator + +config COMMON_CLK_RK808 + tristate "Clock driver for RK805/RK808/RK818" + depends on MFD_RK808 + ---help--- + This driver supports RK805, RK808 and RK818 crystal oscillator clock. These + multi-function devices have two fixed-rate oscillators, + clocked at 32KHz each. Clkout1 is always on, Clkout2 can off + by control register. + +config COMMON_CLK_HI655X + tristate "Clock driver for Hi655x" if EXPERT + depends on (MFD_HI655X_PMIC || COMPILE_TEST) + depends on REGMAP + default MFD_HI655X_PMIC + ---help--- + This driver supports the hi655x PMIC clock. This + multi-function device has one fixed-rate oscillator, clocked + at 32KHz. + +config COMMON_CLK_SCMI + tristate "Clock driver controlled via SCMI interface" + depends on ARM_SCMI_PROTOCOL || COMPILE_TEST + ---help--- + This driver provides support for clocks that are controlled + by firmware that implements the SCMI interface. + + This driver uses SCMI Message Protocol to interact with the + firmware providing all the clock controls. + +config COMMON_CLK_SCPI + tristate "Clock driver controlled via SCPI interface" + depends on ARM_SCPI_PROTOCOL || COMPILE_TEST + ---help--- + This driver provides support for clocks that are controlled + by firmware that implements the SCPI interface. + + This driver uses SCPI Message Protocol to interact with the + firmware providing all the clock controls. + +config COMMON_CLK_SI5351 + tristate "Clock driver for SiLabs 5351A/B/C" + depends on I2C + select REGMAP_I2C + select RATIONAL + ---help--- + This driver supports Silicon Labs 5351A/B/C programmable clock + generators. + +config COMMON_CLK_SI514 + tristate "Clock driver for SiLabs 514 devices" + depends on I2C + depends on OF + select REGMAP_I2C + help + ---help--- + This driver supports the Silicon Labs 514 programmable clock + generator. + +config COMMON_CLK_SI544 + tristate "Clock driver for SiLabs 544 devices" + depends on I2C + select REGMAP_I2C + help + ---help--- + This driver supports the Silicon Labs 544 programmable clock + generator. + +config COMMON_CLK_SI570 + tristate "Clock driver for SiLabs 570 and compatible devices" + depends on I2C + depends on OF + select REGMAP_I2C + help + ---help--- + This driver supports Silicon Labs 570/571/598/599 programmable + clock generators. + +config COMMON_CLK_CDCE706 + tristate "Clock driver for TI CDCE706 clock synthesizer" + depends on I2C + select REGMAP_I2C + select RATIONAL + ---help--- + This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. + +config COMMON_CLK_CDCE925 + tristate "Clock driver for TI CDCE913/925/937/949 devices" + depends on I2C + depends on OF + select REGMAP_I2C + help + ---help--- + This driver supports the TI CDCE913/925/937/949 programmable clock + synthesizer. Each chip has different number of PLLs and outputs. + For example, the CDCE925 contains two PLLs with spread-spectrum + clocking support and five output dividers. The driver only supports + the following setup, and uses a fixed setting for the output muxes. + Y1 is derived from the input clock + Y2 and Y3 derive from PLL1 + Y4 and Y5 derive from PLL2 + Given a target output frequency, the driver will set the PLL and + divider to best approximate the desired output. + +config COMMON_CLK_CS2000_CP + tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier" + depends on I2C + help + If you say yes here you get support for the CS2000 clock multiplier. + +config COMMON_CLK_GEMINI + bool "Clock driver for Cortina Systems Gemini SoC" + depends on ARCH_GEMINI || COMPILE_TEST + select MFD_SYSCON + select RESET_CONTROLLER + ---help--- + This driver supports the SoC clocks on the Cortina Systems Gemini + platform, also known as SL3516 or CS3516. + +config COMMON_CLK_ASPEED + bool "Clock driver for Aspeed BMC SoCs" + depends on ARCH_ASPEED || COMPILE_TEST + default ARCH_ASPEED + select MFD_SYSCON + select RESET_CONTROLLER + ---help--- + This driver supports the SoC clocks on the Aspeed BMC platforms. + + The G4 and G5 series, including the ast2400 and ast2500, are supported + by this driver. + +config COMMON_CLK_S2MPS11 + tristate "Clock driver for S2MPS1X/S5M8767 MFD" + depends on MFD_SEC_CORE || COMPILE_TEST + ---help--- + This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator + clock. These multi-function devices have two (S2MPS14) or three + (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. + +config CLK_TWL6040 + tristate "External McPDM functional clock from twl6040" + depends on TWL6040_CORE + ---help--- + Enable the external functional clock support on OMAP4+ platforms for + McPDM. McPDM module is using the external bit clock on the McPDM bus + as functional clock. + +config COMMON_CLK_AXI_CLKGEN + tristate "AXI clkgen driver" + depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST + help + ---help--- + Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx + FPGAs. It is commonly used in Analog Devices' reference designs. + +config CLK_QORIQ + bool "Clock driver for Freescale QorIQ platforms" + depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF + ---help--- + This adds the clock driver support for Freescale QorIQ platforms + using common clock framework. + +config COMMON_CLK_XGENE + bool "Clock driver for APM XGene SoC" + default y + depends on ARM64 || COMPILE_TEST + ---help--- + Sypport for the APM X-Gene SoC reference, PLL, and device clocks. + +config COMMON_CLK_NXP + def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) + select REGMAP_MMIO if ARCH_LPC32XX + select MFD_SYSCON if ARCH_LPC18XX + ---help--- + Support for clock providers on NXP platforms. + +config COMMON_CLK_PALMAS + tristate "Clock driver for TI Palmas devices" + depends on MFD_PALMAS + ---help--- + This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO + using common clock framework. + +config COMMON_CLK_PWM + tristate "Clock driver for PWMs used as clock outputs" + depends on PWM + ---help--- + Adapter driver so that any PWM output can be (mis)used as clock signal + at 50% duty cycle. + +config COMMON_CLK_PXA + def_bool COMMON_CLK && ARCH_PXA + ---help--- + Support for the Marvell PXA SoC. + +config COMMON_CLK_PIC32 + def_bool COMMON_CLK && MACH_PIC32 + +config COMMON_CLK_OXNAS + bool "Clock driver for the OXNAS SoC Family" + depends on ARCH_OXNAS || COMPILE_TEST + select MFD_SYSCON + ---help--- + Support for the OXNAS SoC Family clocks. + +config COMMON_CLK_VC5 + tristate "Clock driver for IDT VersaClock 5,6 devices" + depends on I2C + depends on OF + select REGMAP_I2C + help + ---help--- + This driver supports the IDT VersaClock 5 and VersaClock 6 + programmable clock generators. + +config COMMON_CLK_STM32MP157 + def_bool COMMON_CLK && MACH_STM32MP157 + help + ---help--- + Support for stm32mp157 SoC family clocks + +config COMMON_CLK_STM32F + def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746) + help + ---help--- + Support for stm32f4 and stm32f7 SoC families clocks + +config COMMON_CLK_STM32H7 + def_bool COMMON_CLK && MACH_STM32H743 + help + ---help--- + Support for stm32h7 SoC family clocks + +source "drivers/clk/actions/Kconfig" +source "drivers/clk/bcm/Kconfig" +source "drivers/clk/hisilicon/Kconfig" +source "drivers/clk/imgtec/Kconfig" +source "drivers/clk/keystone/Kconfig" +source "drivers/clk/mediatek/Kconfig" +source "drivers/clk/meson/Kconfig" +source "drivers/clk/mvebu/Kconfig" +source "drivers/clk/qcom/Kconfig" +source "drivers/clk/renesas/Kconfig" +source "drivers/clk/samsung/Kconfig" +source "drivers/clk/sprd/Kconfig" +source "drivers/clk/sunxi-ng/Kconfig" +source "drivers/clk/tegra/Kconfig" +source "drivers/clk/ti/Kconfig" +source "drivers/clk/uniphier/Kconfig" + +endmenu -- cgit v1.2.3