From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/cpufreq/kirkwood-cpufreq.c | 210 +++++++++++++++++++++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 drivers/cpufreq/kirkwood-cpufreq.c (limited to 'drivers/cpufreq/kirkwood-cpufreq.c') diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c new file mode 100644 index 000000000..8d63a6dc8 --- /dev/null +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -0,0 +1,210 @@ +/* + * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood + * + * Copyright (C) 2013 Andrew Lunn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CPU_SW_INT_BLK BIT(28) + +static struct priv +{ + struct clk *cpu_clk; + struct clk *ddr_clk; + struct clk *powersave_clk; + struct device *dev; + void __iomem *base; +} priv; + +#define STATE_CPU_FREQ 0x01 +#define STATE_DDR_FREQ 0x02 + +/* + * Kirkwood can swap the clock to the CPU between two clocks: + * + * - cpu clk + * - ddr clk + * + * The frequencies are set at runtime before registering this table. + */ +static struct cpufreq_frequency_table kirkwood_freq_table[] = { + {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ + {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */ + {0, 0, CPUFREQ_TABLE_END}, +}; + +static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) +{ + return clk_get_rate(priv.powersave_clk) / 1000; +} + +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int state = kirkwood_freq_table[index].driver_data; + unsigned long reg; + + local_irq_disable(); + + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + switch (state) { + case STATE_CPU_FREQ: + clk_set_parent(priv.powersave_clk, priv.cpu_clk); + break; + case STATE_DDR_FREQ: + clk_set_parent(priv.powersave_clk, priv.ddr_clk); + break; + } + + /* Wait-for-Interrupt, while the hardware changes frequency */ + cpu_do_idle(); + + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel_relaxed(reg, priv.base); + + local_irq_enable(); + + return 0; +} + +/* Module init and exit code */ +static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + return cpufreq_generic_init(policy, kirkwood_freq_table, 5000); +} + +static struct cpufreq_driver kirkwood_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .get = kirkwood_cpufreq_get_cpu_frequency, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = kirkwood_cpufreq_target, + .init = kirkwood_cpufreq_cpu_init, + .name = "kirkwood-cpufreq", + .attr = cpufreq_generic_attr, +}; + +static int kirkwood_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np; + struct resource *res; + int err; + + priv.dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv.base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv.base)) + return PTR_ERR(priv.base); + + np = of_cpu_device_node_get(0); + if (!np) { + dev_err(&pdev->dev, "failed to get cpu device node\n"); + return -ENODEV; + } + + priv.cpu_clk = of_clk_get_by_name(np, "cpu_clk"); + if (IS_ERR(priv.cpu_clk)) { + dev_err(priv.dev, "Unable to get cpuclk\n"); + err = PTR_ERR(priv.cpu_clk); + goto out_node; + } + + err = clk_prepare_enable(priv.cpu_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare cpuclk\n"); + goto out_node; + } + + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; + + priv.ddr_clk = of_clk_get_by_name(np, "ddrclk"); + if (IS_ERR(priv.ddr_clk)) { + dev_err(priv.dev, "Unable to get ddrclk\n"); + err = PTR_ERR(priv.ddr_clk); + goto out_cpu; + } + + err = clk_prepare_enable(priv.ddr_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare ddrclk\n"); + goto out_cpu; + } + kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; + + priv.powersave_clk = of_clk_get_by_name(np, "powersave"); + if (IS_ERR(priv.powersave_clk)) { + dev_err(priv.dev, "Unable to get powersave\n"); + err = PTR_ERR(priv.powersave_clk); + goto out_ddr; + } + err = clk_prepare_enable(priv.powersave_clk); + if (err) { + dev_err(priv.dev, "Unable to prepare powersave clk\n"); + goto out_ddr; + } + + err = cpufreq_register_driver(&kirkwood_cpufreq_driver); + if (err) { + dev_err(priv.dev, "Failed to register cpufreq driver\n"); + goto out_powersave; + } + + of_node_put(np); + return 0; + +out_powersave: + clk_disable_unprepare(priv.powersave_clk); +out_ddr: + clk_disable_unprepare(priv.ddr_clk); +out_cpu: + clk_disable_unprepare(priv.cpu_clk); +out_node: + of_node_put(np); + + return err; +} + +static int kirkwood_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&kirkwood_cpufreq_driver); + + clk_disable_unprepare(priv.powersave_clk); + clk_disable_unprepare(priv.ddr_clk); + clk_disable_unprepare(priv.cpu_clk); + + return 0; +} + +static struct platform_driver kirkwood_cpufreq_platform_driver = { + .probe = kirkwood_cpufreq_probe, + .remove = kirkwood_cpufreq_remove, + .driver = { + .name = "kirkwood-cpufreq", + }, +}; + +module_platform_driver(kirkwood_cpufreq_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andrew Lunn