From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/i2c/busses/i2c-ibm_iic.c | 809 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 809 insertions(+) create mode 100644 drivers/i2c/busses/i2c-ibm_iic.c (limited to 'drivers/i2c/busses/i2c-ibm_iic.c') diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c new file mode 100644 index 000000000..6f6e1dfe7 --- /dev/null +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -0,0 +1,809 @@ +/* + * drivers/i2c/busses/i2c-ibm_iic.c + * + * Support for the IIC peripheral on IBM PPC 4xx + * + * Copyright (c) 2003, 2004 Zultys Technologies. + * Eugene Surovegin or + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan + * + * Based on original work by + * Ian DaSilva + * Armin Kuster + * Matt Porter + * + * Copyright 2000-2003 MontaVista Software Inc. + * + * Original driver version was highly leveraged from i2c-elektor.c + * + * Copyright 1995-97 Simon G. Vogl + * 1998-99 Hans Berglund + * + * With some changes from Kyösti Mälkki + * and even Frodo Looijaard + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "i2c-ibm_iic.h" + +#define DRIVER_VERSION "2.2" + +MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static bool iic_force_poll; +module_param(iic_force_poll, bool, 0); +MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); + +static bool iic_force_fast; +module_param(iic_force_fast, bool, 0); +MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)"); + +#define DBG_LEVEL 0 + +#ifdef DBG +#undef DBG +#endif + +#ifdef DBG2 +#undef DBG2 +#endif + +#if DBG_LEVEL > 0 +# define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x) +#else +# define DBG(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 1 +# define DBG2(f,x...) DBG(f, ##x) +#else +# define DBG2(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 2 +static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); + printk(KERN_DEBUG + " cntl = 0x%02x, mdcntl = 0x%02x\n" + " sts = 0x%02x, extsts = 0x%02x\n" + " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" + " xtcntlss = 0x%02x, directcntl = 0x%02x\n", + in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), + in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), + in_8(&iic->xtcntlss), in_8(&iic->directcntl)); +} +# define DUMP_REGS(h,dev) dump_iic_regs((h),(dev)) +#else +# define DUMP_REGS(h,dev) ((void)0) +#endif + +/* Bus timings (in ns) for bit-banging */ +static struct ibm_iic_timings { + unsigned int hd_sta; + unsigned int su_sto; + unsigned int low; + unsigned int high; + unsigned int buf; +} timings [] = { +/* Standard mode (100 KHz) */ +{ + .hd_sta = 4000, + .su_sto = 4000, + .low = 4700, + .high = 4000, + .buf = 4700, +}, +/* Fast mode (400 KHz) */ +{ + .hd_sta = 600, + .su_sto = 600, + .low = 1300, + .high = 600, + .buf = 1300, +}}; + +/* Enable/disable interrupt generation */ +static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable) +{ + out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0); +} + +/* + * Initialize IIC interface. + */ +static void iic_dev_init(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + + DBG("%d: init\n", dev->idx); + + /* Clear master address */ + out_8(&iic->lmadr, 0); + out_8(&iic->hmadr, 0); + + /* Clear slave address */ + out_8(&iic->lsadr, 0); + out_8(&iic->hsadr, 0); + + /* Clear status & extended status */ + out_8(&iic->sts, STS_SCMP | STS_IRQA); + out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA + | EXTSTS_ICT | EXTSTS_XFRA); + + /* Set clock divider */ + out_8(&iic->clkdiv, dev->clckdiv); + + /* Clear transfer count */ + out_8(&iic->xfrcnt, 0); + + /* Clear extended control and status */ + out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC + | XTCNTLSS_SWS); + + /* Clear control register */ + out_8(&iic->cntl, 0); + + /* Enable interrupts if possible */ + iic_interrupt_mode(dev, dev->irq >= 0); + + /* Set mode control */ + out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS + | (dev->fast_mode ? MDCNTL_FSM : 0)); + + DUMP_REGS("iic_init", dev); +} + +/* + * Reset IIC interface + */ +static void iic_dev_reset(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + int i; + u8 dc; + + DBG("%d: soft reset\n", dev->idx); + DUMP_REGS("reset", dev); + + /* Place chip in the reset state */ + out_8(&iic->xtcntlss, XTCNTLSS_SRST); + + /* Check if bus is free */ + dc = in_8(&iic->directcntl); + if (!DIRCTNL_FREE(dc)){ + DBG("%d: trying to regain bus control\n", dev->idx); + + /* Try to set bus free state */ + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + + /* Wait until we regain bus control */ + for (i = 0; i < 100; ++i){ + dc = in_8(&iic->directcntl); + if (DIRCTNL_FREE(dc)) + break; + + /* Toggle SCL line */ + dc ^= DIRCNTL_SCC; + out_8(&iic->directcntl, dc); + udelay(10); + dc ^= DIRCNTL_SCC; + out_8(&iic->directcntl, dc); + + /* be nice */ + cond_resched(); + } + } + + /* Remove reset */ + out_8(&iic->xtcntlss, 0); + + /* Reinitialize interface */ + iic_dev_init(dev); +} + +/* + * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register. + */ + +/* Wait for SCL and/or SDA to be high */ +static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask) +{ + unsigned long x = jiffies + HZ / 28 + 2; + while ((in_8(&iic->directcntl) & mask) != mask){ + if (unlikely(time_after(jiffies, x))) + return -1; + cond_resched(); + } + return 0; +} + +static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + const struct ibm_iic_timings *t = &timings[dev->fast_mode ? 1 : 0]; + u8 mask, v, sda; + int i, res; + + /* Only 7-bit addresses are supported */ + if (unlikely(p->flags & I2C_M_TEN)){ + DBG("%d: smbus_quick - 10 bit addresses are not supported\n", + dev->idx); + return -EINVAL; + } + + DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr); + + /* Reset IIC interface */ + out_8(&iic->xtcntlss, XTCNTLSS_SRST); + + /* Wait for bus to become free */ + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC))) + goto err; + ndelay(t->buf); + + /* START */ + out_8(&iic->directcntl, DIRCNTL_SCC); + sda = 0; + ndelay(t->hd_sta); + + /* Send address */ + v = i2c_8bit_addr_from_msg(p); + for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){ + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + sda = (v & mask) ? DIRCNTL_SDAC : 0; + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + + out_8(&iic->directcntl, DIRCNTL_SCC | sda); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + ndelay(t->high); + } + + /* ACK */ + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + out_8(&iic->directcntl, DIRCNTL_SDAC); + ndelay(t->low / 2); + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1; + ndelay(t->high); + + /* STOP */ + out_8(&iic->directcntl, 0); + ndelay(t->low); + out_8(&iic->directcntl, DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + ndelay(t->su_sto); + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + + ndelay(t->buf); + + DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK"); +out: + /* Remove reset */ + out_8(&iic->xtcntlss, 0); + + /* Reinitialize interface */ + iic_dev_init(dev); + + return res; +err: + DBG("%d: smbus_quick - bus is stuck\n", dev->idx); + res = -EREMOTEIO; + goto out; +} + +/* + * IIC interrupt handler + */ +static irqreturn_t iic_handler(int irq, void *dev_id) +{ + struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id; + volatile struct iic_regs __iomem *iic = dev->vaddr; + + DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", + dev->idx, in_8(&iic->sts), in_8(&iic->extsts)); + + /* Acknowledge IRQ and wakeup iic_wait_for_tc */ + out_8(&iic->sts, STS_IRQA | STS_SCMP); + wake_up_interruptible(&dev->wq); + + return IRQ_HANDLED; +} + +/* + * Get master transfer result and clear errors if any. + * Returns the number of actually transferred bytes or error (<0) + */ +static int iic_xfer_result(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + + if (unlikely(in_8(&iic->sts) & STS_ERR)){ + DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, + in_8(&iic->extsts)); + + /* Clear errors and possible pending IRQs */ + out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | + EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); + + /* Flush master data buffer */ + out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); + + /* Is bus free? + * If error happened during combined xfer + * IIC interface is usually stuck in some strange + * state, the only way out - soft reset. + */ + if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + DBG("%d: bus is stuck, resetting\n", dev->idx); + iic_dev_reset(dev); + } + return -EREMOTEIO; + } + else + return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK; +} + +/* + * Try to abort active transfer. + */ +static void iic_abort_xfer(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + unsigned long x; + + DBG("%d: iic_abort_xfer\n", dev->idx); + + out_8(&iic->cntl, CNTL_HMT); + + /* + * Wait for the abort command to complete. + * It's not worth to be optimized, just poll (timeout >= 1 tick) + */ + x = jiffies + 2; + while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + if (time_after(jiffies, x)){ + DBG("%d: abort timeout, resetting...\n", dev->idx); + iic_dev_reset(dev); + return; + } + schedule(); + } + + /* Just to clear errors */ + iic_xfer_result(dev); +} + +/* + * Wait for master transfer to complete. + * It puts current process to sleep until we get interrupt or timeout expires. + * Returns the number of transferred bytes or error (<0) + */ +static int iic_wait_for_tc(struct ibm_iic_private* dev){ + + volatile struct iic_regs __iomem *iic = dev->vaddr; + int ret = 0; + + if (dev->irq >= 0){ + /* Interrupt mode */ + ret = wait_event_interruptible_timeout(dev->wq, + !(in_8(&iic->sts) & STS_PT), dev->adap.timeout); + + if (unlikely(ret < 0)) + DBG("%d: wait interrupted\n", dev->idx); + else if (unlikely(in_8(&iic->sts) & STS_PT)){ + DBG("%d: wait timeout\n", dev->idx); + ret = -ETIMEDOUT; + } + } + else { + /* Polling mode */ + unsigned long x = jiffies + dev->adap.timeout; + + while (in_8(&iic->sts) & STS_PT){ + if (unlikely(time_after(jiffies, x))){ + DBG("%d: poll timeout\n", dev->idx); + ret = -ETIMEDOUT; + break; + } + + if (unlikely(signal_pending(current))){ + DBG("%d: poll interrupted\n", dev->idx); + ret = -ERESTARTSYS; + break; + } + schedule(); + } + } + + if (unlikely(ret < 0)) + iic_abort_xfer(dev); + else + ret = iic_xfer_result(dev); + + DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret); + + return ret; +} + +/* + * Low level master transfer routine + */ +static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, + int combined_xfer) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + char* buf = pm->buf; + int i, j, loops, ret = 0; + int len = pm->len; + + u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT; + if (pm->flags & I2C_M_RD) + cntl |= CNTL_RW; + + loops = (len + 3) / 4; + for (i = 0; i < loops; ++i, len -= 4){ + int count = len > 4 ? 4 : len; + u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT); + + if (!(cntl & CNTL_RW)) + for (j = 0; j < count; ++j) + out_8((void __iomem *)&iic->mdbuf, *buf++); + + if (i < loops - 1) + cmd |= CNTL_CHT; + else if (combined_xfer) + cmd |= CNTL_RPST; + + DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd); + + /* Start transfer */ + out_8(&iic->cntl, cmd); + + /* Wait for completion */ + ret = iic_wait_for_tc(dev); + + if (unlikely(ret < 0)) + break; + else if (unlikely(ret != count)){ + DBG("%d: xfer_bytes, requested %d, transferred %d\n", + dev->idx, count, ret); + + /* If it's not a last part of xfer, abort it */ + if (combined_xfer || (i < loops - 1)) + iic_abort_xfer(dev); + + ret = -EREMOTEIO; + break; + } + + if (cntl & CNTL_RW) + for (j = 0; j < count; ++j) + *buf++ = in_8((void __iomem *)&iic->mdbuf); + } + + return ret > 0 ? 0 : ret; +} + +/* + * Set target slave address for master transfer + */ +static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + u16 addr = msg->addr; + + DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, + addr, msg->flags & I2C_M_TEN ? 10 : 7); + + if (msg->flags & I2C_M_TEN){ + out_8(&iic->cntl, CNTL_AMD); + out_8(&iic->lmadr, addr); + out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06)); + } + else { + out_8(&iic->cntl, 0); + out_8(&iic->lmadr, addr << 1); + } +} + +static inline int iic_invalid_address(const struct i2c_msg* p) +{ + return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f)); +} + +static inline int iic_address_neq(const struct i2c_msg* p1, + const struct i2c_msg* p2) +{ + return (p1->addr != p2->addr) + || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN)); +} + +/* + * Generic master transfer entrypoint. + * Returns the number of processed messages or error (<0) + */ +static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap)); + volatile struct iic_regs __iomem *iic = dev->vaddr; + int i, ret = 0; + + DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num); + + /* Check the sanity of the passed messages. + * Uhh, generic i2c layer is more suitable place for such code... + */ + if (unlikely(iic_invalid_address(&msgs[0]))){ + DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, + msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7); + return -EINVAL; + } + for (i = 0; i < num; ++i){ + if (unlikely(msgs[i].len <= 0)){ + if (num == 1 && !msgs[0].len){ + /* Special case for I2C_SMBUS_QUICK emulation. + * IBM IIC doesn't support 0-length transactions + * so we have to emulate them using bit-banging. + */ + return iic_smbus_quick(dev, &msgs[0]); + } + DBG("%d: invalid len %d in msg[%d]\n", dev->idx, + msgs[i].len, i); + return -EINVAL; + } + if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){ + DBG("%d: invalid addr in msg[%d]\n", dev->idx, i); + return -EINVAL; + } + } + + /* Check bus state */ + if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ + DBG("%d: iic_xfer, bus is not free\n", dev->idx); + + /* Usually it means something serious has happened. + * We *cannot* have unfinished previous transfer + * so it doesn't make any sense to try to stop it. + * Probably we were not able to recover from the + * previous error. + * The only *reasonable* thing I can think of here + * is soft reset. --ebs + */ + iic_dev_reset(dev); + + if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + DBG("%d: iic_xfer, bus is still not free\n", dev->idx); + return -EREMOTEIO; + } + } + else { + /* Flush master data buffer (just in case) */ + out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); + } + + /* Load slave address */ + iic_address(dev, &msgs[0]); + + /* Do real transfer */ + for (i = 0; i < num && !ret; ++i) + ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1); + + return ret < 0 ? ret : num; +} + +static u32 iic_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; +} + +static const struct i2c_algorithm iic_algo = { + .master_xfer = iic_xfer, + .functionality = iic_func +}; + +/* + * Calculates IICx_CLCKDIV value for a specific OPB clock frequency + */ +static inline u8 iic_clckdiv(unsigned int opb) +{ + /* Compatibility kludge, should go away after all cards + * are fixed to fill correct value for opbfreq. + * Previous driver version used hardcoded divider value 4, + * it corresponds to OPB frequency from the range (40, 50] MHz + */ + if (!opb){ + printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq," + " fix your board specific setup\n"); + opb = 50000000; + } + + /* Convert to MHz */ + opb /= 1000000; + + if (opb < 20 || opb > 150){ + printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n", + opb); + opb = opb < 20 ? 20 : 150; + } + return (u8)((opb + 9) / 10 - 1); +} + +static int iic_request_irq(struct platform_device *ofdev, + struct ibm_iic_private *dev) +{ + struct device_node *np = ofdev->dev.of_node; + int irq; + + if (iic_force_poll) + return 0; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); + return 0; + } + + /* Disable interrupts until we finish initialization, assumes + * level-sensitive IRQ setup... + */ + iic_interrupt_mode(dev, 0); + if (request_irq(irq, iic_handler, 0, "IBM IIC", dev)) { + dev_err(&ofdev->dev, "request_irq %d failed\n", irq); + /* Fallback to the polling mode */ + return 0; + } + + return irq; +} + +/* + * Register single IIC interface + */ +static int iic_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + struct ibm_iic_private *dev; + struct i2c_adapter *adap; + const u32 *freq; + int ret; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + dev_err(&ofdev->dev, "failed to allocate device data\n"); + return -ENOMEM; + } + + platform_set_drvdata(ofdev, dev); + + dev->vaddr = of_iomap(np, 0); + if (dev->vaddr == NULL) { + dev_err(&ofdev->dev, "failed to iomap device\n"); + ret = -ENXIO; + goto error_cleanup; + } + + init_waitqueue_head(&dev->wq); + + dev->irq = iic_request_irq(ofdev, dev); + if (!dev->irq) + dev_warn(&ofdev->dev, "using polling mode\n"); + + /* Board specific settings */ + if (iic_force_fast || of_get_property(np, "fast-mode", NULL)) + dev->fast_mode = 1; + + freq = of_get_property(np, "clock-frequency", NULL); + if (freq == NULL) { + freq = of_get_property(np->parent, "clock-frequency", NULL); + if (freq == NULL) { + dev_err(&ofdev->dev, "Unable to get bus frequency\n"); + ret = -EINVAL; + goto error_cleanup; + } + } + + dev->clckdiv = iic_clckdiv(*freq); + dev_dbg(&ofdev->dev, "clckdiv = %d\n", dev->clckdiv); + + /* Initialize IIC interface */ + iic_dev_init(dev); + + /* Register it with i2c layer */ + adap = &dev->adap; + adap->dev.parent = &ofdev->dev; + adap->dev.of_node = of_node_get(np); + strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); + i2c_set_adapdata(adap, dev); + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + adap->algo = &iic_algo; + adap->timeout = HZ; + + ret = i2c_add_adapter(adap); + if (ret < 0) + goto error_cleanup; + + dev_info(&ofdev->dev, "using %s mode\n", + dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); + + return 0; + +error_cleanup: + if (dev->irq) { + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + + if (dev->vaddr) + iounmap(dev->vaddr); + + kfree(dev); + return ret; +} + +/* + * Cleanup initialized IIC interface + */ +static int iic_remove(struct platform_device *ofdev) +{ + struct ibm_iic_private *dev = platform_get_drvdata(ofdev); + + i2c_del_adapter(&dev->adap); + + if (dev->irq) { + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + + iounmap(dev->vaddr); + kfree(dev); + + return 0; +} + +static const struct of_device_id ibm_iic_match[] = { + { .compatible = "ibm,iic", }, + {} +}; +MODULE_DEVICE_TABLE(of, ibm_iic_match); + +static struct platform_driver ibm_iic_driver = { + .driver = { + .name = "ibm-iic", + .of_match_table = ibm_iic_match, + }, + .probe = iic_probe, + .remove = iic_remove, +}; + +module_platform_driver(ibm_iic_driver); -- cgit v1.2.3