From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/media/platform/marvell-ccic/Kconfig | 27 + drivers/media/platform/marvell-ccic/Makefile | 5 + drivers/media/platform/marvell-ccic/cafe-driver.c | 661 +++++++ drivers/media/platform/marvell-ccic/mcam-core.c | 1909 +++++++++++++++++++++ drivers/media/platform/marvell-ccic/mcam-core.h | 383 +++++ drivers/media/platform/marvell-ccic/mmp-driver.c | 537 ++++++ 6 files changed, 3522 insertions(+) create mode 100644 drivers/media/platform/marvell-ccic/Kconfig create mode 100644 drivers/media/platform/marvell-ccic/Makefile create mode 100644 drivers/media/platform/marvell-ccic/cafe-driver.c create mode 100644 drivers/media/platform/marvell-ccic/mcam-core.c create mode 100644 drivers/media/platform/marvell-ccic/mcam-core.h create mode 100644 drivers/media/platform/marvell-ccic/mmp-driver.c (limited to 'drivers/media/platform/marvell-ccic') diff --git a/drivers/media/platform/marvell-ccic/Kconfig b/drivers/media/platform/marvell-ccic/Kconfig new file mode 100644 index 000000000..cf12e0772 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/Kconfig @@ -0,0 +1,27 @@ +config VIDEO_CAFE_CCIC + tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support" + depends on PCI && I2C && VIDEO_V4L2 + select VIDEO_OV7670 + select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_DMA_SG + ---help--- + This is a video4linux2 driver for the Marvell 88ALP01 integrated + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + +config VIDEO_MMP_CAMERA + tristate "Marvell Armada 610 integrated camera controller support" + depends on I2C && VIDEO_V4L2 + depends on ARCH_MMP || COMPILE_TEST + select VIDEO_OV7670 + select I2C_GPIO + select VIDEOBUF2_VMALLOC + select VIDEOBUF2_DMA_CONTIG + select VIDEOBUF2_DMA_SG + ---help--- + This is a Video4Linux2 driver for the integrated camera + controller found on Marvell Armada 610 application + processors (and likely beyond). This is the controller found + in OLPC XO 1.75 systems. + diff --git a/drivers/media/platform/marvell-ccic/Makefile b/drivers/media/platform/marvell-ccic/Makefile new file mode 100644 index 000000000..b3a4d0cdc --- /dev/null +++ b/drivers/media/platform/marvell-ccic/Makefile @@ -0,0 +1,5 @@ +obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o mcam-core.o +cafe_ccic-y := cafe-driver.o + +obj-$(CONFIG_VIDEO_MMP_CAMERA) += mmp_camera.o mcam-core.o +mmp_camera-y := mmp-driver.o diff --git a/drivers/media/platform/marvell-ccic/cafe-driver.c b/drivers/media/platform/marvell-ccic/cafe-driver.c new file mode 100644 index 000000000..57d2c483a --- /dev/null +++ b/drivers/media/platform/marvell-ccic/cafe-driver.c @@ -0,0 +1,661 @@ +/* + * A driver for the CMOS camera controller in the Marvell 88ALP01 "cafe" + * multifunction chip. Currently works with the Omnivision OV7670 + * sensor. + * + * The data sheet for this device can be found at: + * http://www.marvell.com/products/pc_connectivity/88alp01/ + * + * Copyright 2006-11 One Laptop Per Child Association, Inc. + * Copyright 2006-11 Jonathan Corbet + * + * Written by Jonathan Corbet, corbet@lwn.net. + * + * v4l2_device/v4l2_subdev conversion by: + * Copyright (C) 2009 Hans Verkuil + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +#define CAFE_VERSION 0x000002 + + +/* + * Parameters. + */ +MODULE_AUTHOR("Jonathan Corbet "); +MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("Video"); + + + + +struct cafe_camera { + int registered; /* Fully initialized? */ + struct mcam_camera mcam; + struct pci_dev *pdev; + wait_queue_head_t smbus_wait; /* Waiting on i2c events */ +}; + +/* + * Most of the camera controller registers are defined in mcam-core.h, + * but the Cafe platform has some additional registers of its own; + * they are described here. + */ + +/* + * "General purpose register" has a couple of GPIOs used for sensor + * power and reset on OLPC XO 1.0 systems. + */ +#define REG_GPR 0xb4 +#define GPR_C1EN 0x00000020 /* Pad 1 (power down) enable */ +#define GPR_C0EN 0x00000010 /* Pad 0 (reset) enable */ +#define GPR_C1 0x00000002 /* Control 1 value */ +/* + * Control 0 is wired to reset on OLPC machines. For ov7x sensors, + * it is active low. + */ +#define GPR_C0 0x00000001 /* Control 0 value */ + +/* + * These registers control the SMBUS module for communicating + * with the sensor. + */ +#define REG_TWSIC0 0xb8 /* TWSI (smbus) control 0 */ +#define TWSIC0_EN 0x00000001 /* TWSI enable */ +#define TWSIC0_MODE 0x00000002 /* 1 = 16-bit, 0 = 8-bit */ +#define TWSIC0_SID 0x000003fc /* Slave ID */ +/* + * Subtle trickery: the slave ID field starts with bit 2. But the + * Linux i2c stack wants to treat the bottommost bit as a separate + * read/write bit, which is why slave ID's are usually presented + * >>1. For consistency with that behavior, we shift over three + * bits instead of two. + */ +#define TWSIC0_SID_SHIFT 3 +#define TWSIC0_CLKDIV 0x0007fc00 /* Clock divider */ +#define TWSIC0_MASKACK 0x00400000 /* Mask ack from sensor */ +#define TWSIC0_OVMAGIC 0x00800000 /* Make it work on OV sensors */ + +#define REG_TWSIC1 0xbc /* TWSI control 1 */ +#define TWSIC1_DATA 0x0000ffff /* Data to/from camchip */ +#define TWSIC1_ADDR 0x00ff0000 /* Address (register) */ +#define TWSIC1_ADDR_SHIFT 16 +#define TWSIC1_READ 0x01000000 /* Set for read op */ +#define TWSIC1_WSTAT 0x02000000 /* Write status */ +#define TWSIC1_RVALID 0x04000000 /* Read data valid */ +#define TWSIC1_ERROR 0x08000000 /* Something screwed up */ + +/* + * Here's the weird global control registers + */ +#define REG_GL_CSR 0x3004 /* Control/status register */ +#define GCSR_SRS 0x00000001 /* SW Reset set */ +#define GCSR_SRC 0x00000002 /* SW Reset clear */ +#define GCSR_MRS 0x00000004 /* Master reset set */ +#define GCSR_MRC 0x00000008 /* HW Reset clear */ +#define GCSR_CCIC_EN 0x00004000 /* CCIC Clock enable */ +#define REG_GL_IMASK 0x300c /* Interrupt mask register */ +#define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ + +#define REG_GL_FCR 0x3038 /* GPIO functional control register */ +#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ +#define REG_GL_GPIOR 0x315c /* GPIO register */ +#define GGPIO_OUT 0x80000 /* GPIO output */ +#define GGPIO_VAL 0x00008 /* Output pin value */ + +#define REG_LEN (REG_GL_IMASK + 4) + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err(&(cam)->pdev->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn(&(cam)->pdev->dev, fmt, ##arg); + +/* -------------------------------------------------------------------- */ +/* + * The I2C/SMBUS interface to the camera itself starts here. The + * controller handles SMBUS itself, presenting a relatively simple register + * interface; all we have to do is to tell it where to route the data. + */ +#define CAFE_SMBUS_TIMEOUT (HZ) /* generous */ + +static inline struct cafe_camera *to_cam(struct v4l2_device *dev) +{ + struct mcam_camera *m = container_of(dev, struct mcam_camera, v4l2_dev); + return container_of(m, struct cafe_camera, mcam); +} + + +static int cafe_smbus_write_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return (c1 & (TWSIC1_WSTAT|TWSIC1_ERROR)) != TWSIC1_WSTAT; +} + +static int cafe_smbus_write_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvell sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = value | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + /* Unfortunately, reading TWSIC1 too soon after sending a command + * causes the device to die. + * Use a busy-wait because we often send a large quantity of small + * commands at-once; using msleep() would cause a lot of context + * switches which take longer than 2ms, resulting in a noticeable + * boot-time and capture-start delays. + */ + mdelay(2); + + /* + * Another sad fact is that sometimes, commands silently complete but + * cafe_smbus_write_done() never becomes aware of this. + * This happens at random and appears to possible occur with any + * command. + * We don't understand why this is. We work around this issue + * with the timeout in the wait below, assuming that all commands + * complete within the timeout. + */ + wait_event_timeout(cam->smbus_wait, cafe_smbus_write_done(mcam), + CAFE_SMBUS_TIMEOUT); + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_WSTAT) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) timed out\n", addr, + command, value); + return -EIO; + } + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS write (%02x/%02x/%02x) error\n", addr, + command, value); + return -EIO; + } + return 0; +} + + + +static int cafe_smbus_read_done(struct mcam_camera *mcam) +{ + unsigned long flags; + int c1; + + /* + * We must delay after the interrupt, or the controller gets confused + * and never does give us good status. Fortunately, we don't do this + * often. + */ + udelay(20); + spin_lock_irqsave(&mcam->dev_lock, flags); + c1 = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + return c1 & (TWSIC1_RVALID|TWSIC1_ERROR); +} + + + +static int cafe_smbus_read_data(struct cafe_camera *cam, + u16 addr, u8 command, u8 *value) +{ + unsigned int rval; + unsigned long flags; + struct mcam_camera *mcam = &cam->mcam; + + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = TWSIC0_EN | ((addr << TWSIC0_SID_SHIFT) & TWSIC0_SID); + rval |= TWSIC0_OVMAGIC; /* Make OV sensors work */ + /* + * Marvel sez set clkdiv to all 1's for now. + */ + rval |= TWSIC0_CLKDIV; + mcam_reg_write(mcam, REG_TWSIC0, rval); + (void) mcam_reg_read(mcam, REG_TWSIC1); /* force write */ + rval = TWSIC1_READ | ((command << TWSIC1_ADDR_SHIFT) & TWSIC1_ADDR); + mcam_reg_write(mcam, REG_TWSIC1, rval); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + wait_event_timeout(cam->smbus_wait, + cafe_smbus_read_done(mcam), CAFE_SMBUS_TIMEOUT); + spin_lock_irqsave(&mcam->dev_lock, flags); + rval = mcam_reg_read(mcam, REG_TWSIC1); + spin_unlock_irqrestore(&mcam->dev_lock, flags); + + if (rval & TWSIC1_ERROR) { + cam_err(cam, "SMBUS read (%02x/%02x) error\n", addr, command); + return -EIO; + } + if (!(rval & TWSIC1_RVALID)) { + cam_err(cam, "SMBUS read (%02x/%02x) timed out\n", addr, + command); + return -EIO; + } + *value = rval & 0xff; + return 0; +} + +/* + * Perform a transfer over SMBUS. This thing is called under + * the i2c bus lock, so we shouldn't race with ourselves... + */ +static int cafe_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char rw, u8 command, + int size, union i2c_smbus_data *data) +{ + struct cafe_camera *cam = i2c_get_adapdata(adapter); + int ret = -EINVAL; + + /* + * This interface would appear to only do byte data ops. OK + * it can do word too, but the cam chip has no use for that. + */ + if (size != I2C_SMBUS_BYTE_DATA) { + cam_err(cam, "funky xfer size %d\n", size); + return -EINVAL; + } + + if (rw == I2C_SMBUS_WRITE) + ret = cafe_smbus_write_data(cam, addr, command, data->byte); + else if (rw == I2C_SMBUS_READ) + ret = cafe_smbus_read_data(cam, addr, command, &data->byte); + return ret; +} + + +static void cafe_smbus_enable_irq(struct cafe_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->mcam.dev_lock, flags); + mcam_reg_set_bit(&cam->mcam, REG_IRQMASK, TWSIIRQS); + spin_unlock_irqrestore(&cam->mcam.dev_lock, flags); +} + +static u32 cafe_smbus_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_READ_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA; +} + +static const struct i2c_algorithm cafe_smbus_algo = { + .smbus_xfer = cafe_smbus_xfer, + .functionality = cafe_smbus_func +}; + +static int cafe_smbus_setup(struct cafe_camera *cam) +{ + struct i2c_adapter *adap; + int ret; + + adap = kzalloc(sizeof(*adap), GFP_KERNEL); + if (adap == NULL) + return -ENOMEM; + adap->owner = THIS_MODULE; + adap->algo = &cafe_smbus_algo; + strcpy(adap->name, "cafe_ccic"); + adap->dev.parent = &cam->pdev->dev; + i2c_set_adapdata(adap, cam); + ret = i2c_add_adapter(adap); + if (ret) { + printk(KERN_ERR "Unable to register cafe i2c adapter\n"); + kfree(adap); + return ret; + } + + cam->mcam.i2c_adapter = adap; + cafe_smbus_enable_irq(cam); + return 0; +} + +static void cafe_smbus_shutdown(struct cafe_camera *cam) +{ + i2c_del_adapter(cam->mcam.i2c_adapter); + kfree(cam->mcam.i2c_adapter); +} + + +/* + * Controller-level stuff + */ + +static void cafe_ctlr_init(struct mcam_camera *mcam) +{ + unsigned long flags; + + spin_lock_irqsave(&mcam->dev_lock, flags); + /* + * Added magic to bring up the hardware on the B-Test board + */ + mcam_reg_write(mcam, 0x3038, 0x8); + mcam_reg_write(mcam, 0x315c, 0x80008); + /* + * Go through the dance needed to wake the device up. + * Note that these registers are global and shared + * with the NAND and SD devices. Interaction between the + * three still needs to be examined. + */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRS|GCSR_MRS); /* Needed? */ + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRC); + mcam_reg_write(mcam, REG_GL_CSR, GCSR_SRC|GCSR_MRS); + /* + * Here we must wait a bit for the controller to come around. + */ + spin_unlock_irqrestore(&mcam->dev_lock, flags); + msleep(5); + spin_lock_irqsave(&mcam->dev_lock, flags); + + mcam_reg_write(mcam, REG_GL_CSR, GCSR_CCIC_EN|GCSR_SRC|GCSR_MRC); + mcam_reg_set_bit(mcam, REG_GL_IMASK, GIMSK_CCIC_EN); + /* + * Mask all interrupts. + */ + mcam_reg_write(mcam, REG_IRQMASK, 0); + spin_unlock_irqrestore(&mcam->dev_lock, flags); +} + + +static int cafe_ctlr_power_up(struct mcam_camera *mcam) +{ + /* + * Part one of the sensor dance: turn the global + * GPIO signal on. + */ + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL); + /* + * Put the sensor into operational mode (assumes OLPC-style + * wiring). Control 0 is reset - set to 1 to operate. + * Control 1 is power down, set to 0 to operate. + */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN); /* pwr up, reset */ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); + + return 0; +} + +static void cafe_ctlr_power_down(struct mcam_camera *mcam) +{ + mcam_reg_write(mcam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); + mcam_reg_write(mcam, REG_GL_FCR, GFCR_GPIO_ON); + mcam_reg_write(mcam, REG_GL_GPIOR, GGPIO_OUT); +} + + + +/* + * The platform interrupt handler. + */ +static irqreturn_t cafe_irq(int irq, void *data) +{ + struct cafe_camera *cam = data; + struct mcam_camera *mcam = &cam->mcam; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = cam->registered && mccic_irq(mcam, irqs); + if (irqs & TWSIIRQS) { + mcam_reg_write(mcam, REG_IRQSTAT, TWSIIRQS); + wake_up(&cam->smbus_wait); + handled = 1; + } + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + + +/* -------------------------------------------------------------------------- */ +/* + * PCI interface stuff. + */ + +static int cafe_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int ret; + struct cafe_camera *cam; + struct mcam_camera *mcam; + + /* + * Start putting together one of our big camera structures. + */ + ret = -ENOMEM; + cam = kzalloc(sizeof(struct cafe_camera), GFP_KERNEL); + if (cam == NULL) + goto out; + cam->pdev = pdev; + mcam = &cam->mcam; + mcam->chip_id = MCAM_CAFE; + spin_lock_init(&mcam->dev_lock); + init_waitqueue_head(&cam->smbus_wait); + mcam->plat_power_up = cafe_ctlr_power_up; + mcam->plat_power_down = cafe_ctlr_power_down; + mcam->dev = &pdev->dev; + snprintf(mcam->bus_info, sizeof(mcam->bus_info), "PCI:%s", pci_name(pdev)); + /* + * Set the clock speed for the XO 1; I don't believe this + * driver has ever run anywhere else. + */ + mcam->clock_speed = 45; + mcam->use_smbus = 1; + /* + * Vmalloc mode for buffers is traditional with this driver. + * We *might* be able to run DMA_contig, especially on a system + * with CMA in it. + */ + mcam->buffer_mode = B_vmalloc; + /* + * Get set up on the PCI bus. + */ + ret = pci_enable_device(pdev); + if (ret) + goto out_free; + pci_set_master(pdev); + + ret = -EIO; + mcam->regs = pci_iomap(pdev, 0, 0); + if (!mcam->regs) { + printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n"); + goto out_disable; + } + mcam->regs_size = pci_resource_len(pdev, 0); + ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); + if (ret) + goto out_iounmap; + + /* + * Initialize the controller and leave it powered up. It will + * stay that way until the sensor driver shows up. + */ + cafe_ctlr_init(mcam); + cafe_ctlr_power_up(mcam); + /* + * Set up I2C/SMBUS communications. We have to drop the mutex here + * because the sensor could attach in this call chain, leading to + * unsightly deadlocks. + */ + ret = cafe_smbus_setup(cam); + if (ret) + goto out_pdown; + + ret = mccic_register(mcam); + if (ret == 0) { + cam->registered = 1; + return 0; + } + + cafe_smbus_shutdown(cam); +out_pdown: + cafe_ctlr_power_down(mcam); + free_irq(pdev->irq, cam); +out_iounmap: + pci_iounmap(pdev, mcam->regs); +out_disable: + pci_disable_device(pdev); +out_free: + kfree(cam); +out: + return ret; +} + + +/* + * Shut down an initialized device + */ +static void cafe_shutdown(struct cafe_camera *cam) +{ + mccic_shutdown(&cam->mcam); + cafe_smbus_shutdown(cam); + free_irq(cam->pdev->irq, cam); + pci_iounmap(cam->pdev, cam->mcam.regs); +} + + +static void cafe_pci_remove(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + + if (cam == NULL) { + printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev); + return; + } + cafe_shutdown(cam); + kfree(cam); +} + + +#ifdef CONFIG_PM +/* + * Basic power management. + */ +static int cafe_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + mccic_suspend(&cam->mcam); + pci_disable_device(pdev); + return 0; +} + + +static int cafe_pci_resume(struct pci_dev *pdev) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); + struct cafe_camera *cam = to_cam(v4l2_dev); + int ret = 0; + + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + + if (ret) { + cam_warn(cam, "Unable to re-enable device on resume!\n"); + return ret; + } + cafe_ctlr_init(&cam->mcam); + return mccic_resume(&cam->mcam); +} + +#endif /* CONFIG_PM */ + +static const struct pci_device_id cafe_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, + PCI_DEVICE_ID_MARVELL_88ALP01_CCIC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, cafe_ids); + +static struct pci_driver cafe_pci_driver = { + .name = "cafe1000-ccic", + .id_table = cafe_ids, + .probe = cafe_pci_probe, + .remove = cafe_pci_remove, +#ifdef CONFIG_PM + .suspend = cafe_pci_suspend, + .resume = cafe_pci_resume, +#endif +}; + + + + +static int __init cafe_init(void) +{ + int ret; + + printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n", + CAFE_VERSION); + ret = pci_register_driver(&cafe_pci_driver); + if (ret) { + printk(KERN_ERR "Unable to register cafe_ccic driver\n"); + goto out; + } + ret = 0; + +out: + return ret; +} + + +static void __exit cafe_exit(void) +{ + pci_unregister_driver(&cafe_pci_driver); +} + +module_init(cafe_init); +module_exit(cafe_exit); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c new file mode 100644 index 000000000..eeee15ff0 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mcam-core.c @@ -0,0 +1,1909 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * The Marvell camera core. This device appears in a number of settings, + * so it needs platform-specific support outside of the core. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +#ifdef MCAM_MODE_VMALLOC +/* + * Internal DMA buffer management. Since the controller cannot do S/G I/O, + * we must have physically contiguous buffers to bring frames into. + * These parameters control how many buffers we use, whether we + * allocate them at load time (better chance of success, but nails down + * memory) or when somebody tries to use the camera (riskier), and, + * for load-time allocation, how big they should be. + * + * The controller can cycle through three buffers. We could use + * more by flipping pointers around, but it probably makes little + * sense. + */ + +static bool alloc_bufs_at_read; +module_param(alloc_bufs_at_read, bool, 0444); +MODULE_PARM_DESC(alloc_bufs_at_read, + "Non-zero value causes DMA buffers to be allocated when the video capture device is read, rather than at module load time. This saves memory, but decreases the chances of successfully getting those buffers. This parameter is only used in the vmalloc buffer mode"); + +static int n_dma_bufs = 3; +module_param(n_dma_bufs, uint, 0644); +MODULE_PARM_DESC(n_dma_bufs, + "The number of DMA buffers to allocate. Can be either two (saves memory, makes timing tighter) or three."); + +static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2; /* Worst case */ +module_param(dma_buf_size, uint, 0444); +MODULE_PARM_DESC(dma_buf_size, + "The size of the allocated DMA buffers. If actual operating parameters require larger buffers, an attempt to reallocate will be made."); +#else /* MCAM_MODE_VMALLOC */ +static const bool alloc_bufs_at_read; +static const int n_dma_bufs = 3; /* Used by S/G_PARM */ +#endif /* MCAM_MODE_VMALLOC */ + +static bool flip; +module_param(flip, bool, 0444); +MODULE_PARM_DESC(flip, + "If set, the sensor will be instructed to flip the image vertically."); + +static int buffer_mode = -1; +module_param(buffer_mode, int, 0444); +MODULE_PARM_DESC(buffer_mode, + "Set the buffer mode to be used; default is to go with what the platform driver asks for. Set to 0 for vmalloc, 1 for DMA contiguous."); + +/* + * Status flags. Always manipulated with bit operations. + */ +#define CF_BUF0_VALID 0 /* Buffers valid - first three */ +#define CF_BUF1_VALID 1 +#define CF_BUF2_VALID 2 +#define CF_DMA_ACTIVE 3 /* A frame is incoming */ +#define CF_CONFIG_NEEDED 4 /* Must configure hardware */ +#define CF_SINGLE_BUFFER 5 /* Running with a single buffer */ +#define CF_SG_RESTART 6 /* SG restart needed */ +#define CF_FRAME_SOF0 7 /* Frame 0 started */ +#define CF_FRAME_SOF1 8 +#define CF_FRAME_SOF2 9 + +#define sensor_call(cam, o, f, args...) \ + v4l2_subdev_call(cam->sensor, o, f, ##args) + +static struct mcam_format_struct { + __u8 *desc; + __u32 pixelformat; + int bpp; /* Bytes per pixel */ + bool planar; + u32 mbus_code; +} mcam_formats[] = { + { + .desc = "YUYV 4:2:2", + .pixelformat = V4L2_PIX_FMT_YUYV, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 2, + .planar = false, + }, + { + .desc = "YVYU 4:2:2", + .pixelformat = V4L2_PIX_FMT_YVYU, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 2, + .planar = false, + }, + { + .desc = "YUV 4:2:0 PLANAR", + .pixelformat = V4L2_PIX_FMT_YUV420, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 1, + .planar = true, + }, + { + .desc = "YVU 4:2:0 PLANAR", + .pixelformat = V4L2_PIX_FMT_YVU420, + .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8, + .bpp = 1, + .planar = true, + }, + { + .desc = "XRGB 444", + .pixelformat = V4L2_PIX_FMT_XRGB444, + .mbus_code = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE, + .bpp = 2, + .planar = false, + }, + { + .desc = "RGB 565", + .pixelformat = V4L2_PIX_FMT_RGB565, + .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE, + .bpp = 2, + .planar = false, + }, + { + .desc = "Raw RGB Bayer", + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, + .bpp = 1, + .planar = false, + }, +}; +#define N_MCAM_FMTS ARRAY_SIZE(mcam_formats) + +static struct mcam_format_struct *mcam_find_format(u32 pixelformat) +{ + unsigned i; + + for (i = 0; i < N_MCAM_FMTS; i++) + if (mcam_formats[i].pixelformat == pixelformat) + return mcam_formats + i; + /* Not found? Then return the first format. */ + return mcam_formats; +} + +/* + * The default format we use until somebody says otherwise. + */ +static const struct v4l2_pix_format mcam_def_pix_format = { + .width = VGA_WIDTH, + .height = VGA_HEIGHT, + .pixelformat = V4L2_PIX_FMT_YUYV, + .field = V4L2_FIELD_NONE, + .bytesperline = VGA_WIDTH*2, + .sizeimage = VGA_WIDTH*VGA_HEIGHT*2, + .colorspace = V4L2_COLORSPACE_SRGB, +}; + +static const u32 mcam_def_mbus_code = MEDIA_BUS_FMT_YUYV8_2X8; + + +/* + * The two-word DMA descriptor format used by the Armada 610 and like. There + * Is a three-word format as well (set C1_DESC_3WORD) where the third + * word is a pointer to the next descriptor, but we don't use it. Two-word + * descriptors have to be contiguous in memory. + */ +struct mcam_dma_desc { + u32 dma_addr; + u32 segment_len; +}; + +/* + * Our buffer type for working with videobuf2. Note that the vb2 + * developers have decreed that struct vb2_v4l2_buffer must be at the + * beginning of this structure. + */ +struct mcam_vb_buffer { + struct vb2_v4l2_buffer vb_buf; + struct list_head queue; + struct mcam_dma_desc *dma_desc; /* Descriptor virtual address */ + dma_addr_t dma_desc_pa; /* Descriptor physical address */ +}; + +static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_v4l2_buffer *vb) +{ + return container_of(vb, struct mcam_vb_buffer, vb_buf); +} + +/* + * Hand a completed buffer back to user space. + */ +static void mcam_buffer_done(struct mcam_camera *cam, int frame, + struct vb2_v4l2_buffer *vbuf) +{ + vbuf->vb2_buf.planes[0].bytesused = cam->pix_format.sizeimage; + vbuf->sequence = cam->buf_seq[frame]; + vbuf->field = V4L2_FIELD_NONE; + vbuf->vb2_buf.timestamp = ktime_get_ns(); + vb2_set_plane_payload(&vbuf->vb2_buf, 0, cam->pix_format.sizeimage); + vb2_buffer_done(&vbuf->vb2_buf, VB2_BUF_STATE_DONE); +} + + + +/* + * Debugging and related. + */ +#define cam_err(cam, fmt, arg...) \ + dev_err((cam)->dev, fmt, ##arg); +#define cam_warn(cam, fmt, arg...) \ + dev_warn((cam)->dev, fmt, ##arg); +#define cam_dbg(cam, fmt, arg...) \ + dev_dbg((cam)->dev, fmt, ##arg); + + +/* + * Flag manipulation helpers + */ +static void mcam_reset_buffers(struct mcam_camera *cam) +{ + int i; + + cam->next_buf = -1; + for (i = 0; i < cam->nbufs; i++) { + clear_bit(i, &cam->flags); + clear_bit(CF_FRAME_SOF0 + i, &cam->flags); + } +} + +static inline int mcam_needs_config(struct mcam_camera *cam) +{ + return test_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +static void mcam_set_config_needed(struct mcam_camera *cam, int needed) +{ + if (needed) + set_bit(CF_CONFIG_NEEDED, &cam->flags); + else + clear_bit(CF_CONFIG_NEEDED, &cam->flags); +} + +/* ------------------------------------------------------------------- */ +/* + * Make the controller start grabbing images. Everything must + * be set up before doing this. + */ +static void mcam_ctlr_start(struct mcam_camera *cam) +{ + /* set_bit performs a read, so no other barrier should be + needed here */ + mcam_reg_set_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void mcam_ctlr_stop(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); +} + +static void mcam_enable_mipi(struct mcam_camera *mcam) +{ + /* Using MIPI mode and enable MIPI */ + cam_dbg(mcam, "camera: DPHY3=0x%x, DPHY5=0x%x, DPHY6=0x%x\n", + mcam->dphy[0], mcam->dphy[1], mcam->dphy[2]); + mcam_reg_write(mcam, REG_CSI2_DPHY3, mcam->dphy[0]); + mcam_reg_write(mcam, REG_CSI2_DPHY5, mcam->dphy[1]); + mcam_reg_write(mcam, REG_CSI2_DPHY6, mcam->dphy[2]); + + if (!mcam->mipi_enabled) { + if (mcam->lane > 4 || mcam->lane <= 0) { + cam_warn(mcam, "lane number error\n"); + mcam->lane = 1; /* set the default value */ + } + /* + * 0x41 actives 1 lane + * 0x43 actives 2 lanes + * 0x45 actives 3 lanes (never happen) + * 0x47 actives 4 lanes + */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, + CSI2_C0_MIPI_EN | CSI2_C0_ACT_LANE(mcam->lane)); + mcam_reg_write(mcam, REG_CLKCTRL, + (mcam->mclk_src << 29) | mcam->mclk_div); + + mcam->mipi_enabled = true; + } +} + +static void mcam_disable_mipi(struct mcam_camera *mcam) +{ + /* Using Parallel mode or disable MIPI */ + mcam_reg_write(mcam, REG_CSI2_CTRL0, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY3, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY5, 0x0); + mcam_reg_write(mcam, REG_CSI2_DPHY6, 0x0); + mcam->mipi_enabled = false; +} + +static bool mcam_fmt_is_planar(__u32 pfmt) +{ + struct mcam_format_struct *f; + + f = mcam_find_format(pfmt); + return f->planar; +} + +static void mcam_write_yuv_bases(struct mcam_camera *cam, + unsigned frame, dma_addr_t base) +{ + struct v4l2_pix_format *fmt = &cam->pix_format; + u32 pixel_count = fmt->width * fmt->height; + dma_addr_t y, u = 0, v = 0; + + y = base; + + switch (fmt->pixelformat) { + case V4L2_PIX_FMT_YUV420: + u = y + pixel_count; + v = u + pixel_count / 4; + break; + case V4L2_PIX_FMT_YVU420: + v = y + pixel_count; + u = v + pixel_count / 4; + break; + default: + break; + } + + mcam_reg_write(cam, REG_Y0BAR + frame * 4, y); + if (mcam_fmt_is_planar(fmt->pixelformat)) { + mcam_reg_write(cam, REG_U0BAR + frame * 4, u); + mcam_reg_write(cam, REG_V0BAR + frame * 4, v); + } +} + +/* ------------------------------------------------------------------- */ + +#ifdef MCAM_MODE_VMALLOC +/* + * Code specific to the vmalloc buffer mode. + */ + +/* + * Allocate in-kernel DMA buffers for vmalloc mode. + */ +static int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + int i; + + mcam_set_config_needed(cam, 1); + if (loadtime) + cam->dma_buf_size = dma_buf_size; + else + cam->dma_buf_size = cam->pix_format.sizeimage; + if (n_dma_bufs > 3) + n_dma_bufs = 3; + + cam->nbufs = 0; + for (i = 0; i < n_dma_bufs; i++) { + cam->dma_bufs[i] = dma_alloc_coherent(cam->dev, + cam->dma_buf_size, cam->dma_handles + i, + GFP_KERNEL); + if (cam->dma_bufs[i] == NULL) { + cam_warn(cam, "Failed to allocate DMA buffer\n"); + break; + } + (cam->nbufs)++; + } + + switch (cam->nbufs) { + case 1: + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[0], cam->dma_handles[0]); + cam->nbufs = 0; + /* fall-through */ + case 0: + cam_err(cam, "Insufficient DMA buffers, cannot operate\n"); + return -ENOMEM; + + case 2: + if (n_dma_bufs > 2) + cam_warn(cam, "Will limp along with only 2 buffers\n"); + break; + } + return 0; +} + +static void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + int i; + + for (i = 0; i < cam->nbufs; i++) { + dma_free_coherent(cam->dev, cam->dma_buf_size, + cam->dma_bufs[i], cam->dma_handles[i]); + cam->dma_bufs[i] = NULL; + } + cam->nbufs = 0; +} + + +/* + * Set up DMA buffers when operating in vmalloc mode + */ +static void mcam_ctlr_dma_vmalloc(struct mcam_camera *cam) +{ + /* + * Store the first two YUV buffers. Then either + * set the third if it exists, or tell the controller + * to just use two. + */ + mcam_write_yuv_bases(cam, 0, cam->dma_handles[0]); + mcam_write_yuv_bases(cam, 1, cam->dma_handles[1]); + if (cam->nbufs > 2) { + mcam_write_yuv_bases(cam, 2, cam->dma_handles[2]); + mcam_reg_clear_bit(cam, REG_CTRL1, C1_TWOBUFS); + } else + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + if (cam->chip_id == MCAM_CAFE) + mcam_reg_write(cam, REG_UBAR, 0); /* 32 bits only */ +} + +/* + * Copy data out to user space in the vmalloc case + */ +static void mcam_frame_tasklet(unsigned long data) +{ + struct mcam_camera *cam = (struct mcam_camera *) data; + int i; + unsigned long flags; + struct mcam_vb_buffer *buf; + + spin_lock_irqsave(&cam->dev_lock, flags); + for (i = 0; i < cam->nbufs; i++) { + int bufno = cam->next_buf; + + if (cam->state != S_STREAMING || bufno < 0) + break; /* I/O got stopped */ + if (++(cam->next_buf) >= cam->nbufs) + cam->next_buf = 0; + if (!test_bit(bufno, &cam->flags)) + continue; + if (list_empty(&cam->buffers)) { + cam->frame_state.singles++; + break; /* Leave it valid, hope for better later */ + } + cam->frame_state.delivered++; + clear_bit(bufno, &cam->flags); + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, + queue); + list_del_init(&buf->queue); + /* + * Drop the lock during the big copy. This *should* be safe... + */ + spin_unlock_irqrestore(&cam->dev_lock, flags); + memcpy(vb2_plane_vaddr(&buf->vb_buf.vb2_buf, 0), + cam->dma_bufs[bufno], + cam->pix_format.sizeimage); + mcam_buffer_done(cam, bufno, &buf->vb_buf); + spin_lock_irqsave(&cam->dev_lock, flags); + } + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Make sure our allocated buffers are up to the task. + */ +static int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + if (cam->nbufs > 0 && cam->dma_buf_size < cam->pix_format.sizeimage) + mcam_free_dma_bufs(cam); + if (cam->nbufs == 0) + return mcam_alloc_dma_bufs(cam, 0); + return 0; +} + +static void mcam_vmalloc_done(struct mcam_camera *cam, int frame) +{ + tasklet_schedule(&cam->s_tasklet); +} + +#else /* MCAM_MODE_VMALLOC */ + +static inline int mcam_alloc_dma_bufs(struct mcam_camera *cam, int loadtime) +{ + return 0; +} + +static inline void mcam_free_dma_bufs(struct mcam_camera *cam) +{ + return; +} + +static inline int mcam_check_dma_buffers(struct mcam_camera *cam) +{ + return 0; +} + + + +#endif /* MCAM_MODE_VMALLOC */ + + +#ifdef MCAM_MODE_DMA_CONTIG +/* ---------------------------------------------------------------------- */ +/* + * DMA-contiguous code. + */ + +/* + * Set up a contiguous buffer for the given frame. Here also is where + * the underrun strategy is set: if there is no buffer available, reuse + * the buffer from the other BAR and set the CF_SINGLE_BUFFER flag to + * keep the interrupt handler from giving that buffer back to user + * space. In this way, we always have a buffer to DMA to and don't + * have to try to play games stopping and restarting the controller. + */ +static void mcam_set_contig_buffer(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf; + dma_addr_t dma_handle; + struct vb2_v4l2_buffer *vb; + + /* + * If there are no available buffers, go into single mode + */ + if (list_empty(&cam->buffers)) { + buf = cam->vb_bufs[frame ^ 0x1]; + set_bit(CF_SINGLE_BUFFER, &cam->flags); + cam->frame_state.singles++; + } else { + /* + * OK, we have a buffer we can use. + */ + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, + queue); + list_del_init(&buf->queue); + clear_bit(CF_SINGLE_BUFFER, &cam->flags); + } + + cam->vb_bufs[frame] = buf; + vb = &buf->vb_buf; + + dma_handle = vb2_dma_contig_plane_dma_addr(&vb->vb2_buf, 0); + mcam_write_yuv_bases(cam, frame, dma_handle); +} + +/* + * Initial B_DMA_contig setup. + */ +static void mcam_ctlr_dma_contig(struct mcam_camera *cam) +{ + mcam_reg_set_bit(cam, REG_CTRL1, C1_TWOBUFS); + cam->nbufs = 2; + mcam_set_contig_buffer(cam, 0); + mcam_set_contig_buffer(cam, 1); +} + +/* + * Frame completion handling. + */ +static void mcam_dma_contig_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[frame]; + + if (!test_bit(CF_SINGLE_BUFFER, &cam->flags)) { + cam->frame_state.delivered++; + cam->vb_bufs[frame] = NULL; + mcam_buffer_done(cam, frame, &buf->vb_buf); + } + mcam_set_contig_buffer(cam, frame); +} + +#endif /* MCAM_MODE_DMA_CONTIG */ + +#ifdef MCAM_MODE_DMA_SG +/* ---------------------------------------------------------------------- */ +/* + * Scatter/gather-specific code. + */ + +/* + * Set up the next buffer for S/G I/O; caller should be sure that + * the controller is stopped and a buffer is available. + */ +static void mcam_sg_next_buffer(struct mcam_camera *cam) +{ + struct mcam_vb_buffer *buf; + struct sg_table *sg_table; + + buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue); + list_del_init(&buf->queue); + sg_table = vb2_dma_sg_plane_desc(&buf->vb_buf.vb2_buf, 0); + /* + * Very Bad Not Good Things happen if you don't clear + * C1_DESC_ENA before making any descriptor changes. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA); + mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa); + mcam_reg_write(cam, REG_DESC_LEN_Y, + sg_table->nents * sizeof(struct mcam_dma_desc)); + mcam_reg_write(cam, REG_DESC_LEN_U, 0); + mcam_reg_write(cam, REG_DESC_LEN_V, 0); + mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA); + cam->vb_bufs[0] = buf; +} + +/* + * Initial B_DMA_sg setup + */ +static void mcam_ctlr_dma_sg(struct mcam_camera *cam) +{ + /* + * The list-empty condition can hit us at resume time + * if the buffer list was empty when the system was suspended. + */ + if (list_empty(&cam->buffers)) { + set_bit(CF_SG_RESTART, &cam->flags); + return; + } + + mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_3WORD); + mcam_sg_next_buffer(cam); + cam->nbufs = 3; +} + + +/* + * Frame completion with S/G is trickier. We can't muck with + * a descriptor chain on the fly, since the controller buffers it + * internally. So we have to actually stop and restart; Marvell + * says this is the way to do it. + * + * Of course, stopping is easier said than done; experience shows + * that the controller can start a frame *after* C0_ENABLE has been + * cleared. So when running in S/G mode, the controller is "stopped" + * on receipt of the start-of-frame interrupt. That means we can + * safely change the DMA descriptor array here and restart things + * (assuming there's another buffer waiting to go). + */ +static void mcam_dma_sg_done(struct mcam_camera *cam, int frame) +{ + struct mcam_vb_buffer *buf = cam->vb_bufs[0]; + + /* + * If we're no longer supposed to be streaming, don't do anything. + */ + if (cam->state != S_STREAMING) + return; + /* + * If we have another buffer available, put it in and + * restart the engine. + */ + if (!list_empty(&cam->buffers)) { + mcam_sg_next_buffer(cam); + mcam_ctlr_start(cam); + /* + * Otherwise set CF_SG_RESTART and the controller will + * be restarted once another buffer shows up. + */ + } else { + set_bit(CF_SG_RESTART, &cam->flags); + cam->frame_state.singles++; + cam->vb_bufs[0] = NULL; + } + /* + * Now we can give the completed frame back to user space. + */ + cam->frame_state.delivered++; + mcam_buffer_done(cam, frame, &buf->vb_buf); +} + + +/* + * Scatter/gather mode requires stopping the controller between + * frames so we can put in a new DMA descriptor array. If no new + * buffer exists at frame completion, the controller is left stopped; + * this function is charged with gettig things going again. + */ +static void mcam_sg_restart(struct mcam_camera *cam) +{ + mcam_ctlr_dma_sg(cam); + mcam_ctlr_start(cam); + clear_bit(CF_SG_RESTART, &cam->flags); +} + +#else /* MCAM_MODE_DMA_SG */ + +static inline void mcam_sg_restart(struct mcam_camera *cam) +{ + return; +} + +#endif /* MCAM_MODE_DMA_SG */ + +/* ---------------------------------------------------------------------- */ +/* + * Buffer-mode-independent controller code. + */ + +/* + * Image format setup + */ +static void mcam_ctlr_image(struct mcam_camera *cam) +{ + struct v4l2_pix_format *fmt = &cam->pix_format; + u32 widthy = 0, widthuv = 0, imgsz_h, imgsz_w; + + cam_dbg(cam, "camera: bytesperline = %d; height = %d\n", + fmt->bytesperline, fmt->sizeimage / fmt->bytesperline); + imgsz_h = (fmt->height << IMGSZ_V_SHIFT) & IMGSZ_V_MASK; + imgsz_w = (fmt->width * 2) & IMGSZ_H_MASK; + + switch (fmt->pixelformat) { + case V4L2_PIX_FMT_YUYV: + case V4L2_PIX_FMT_YVYU: + widthy = fmt->width * 2; + widthuv = 0; + break; + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + widthy = fmt->width; + widthuv = fmt->width / 2; + break; + default: + widthy = fmt->bytesperline; + widthuv = 0; + break; + } + + mcam_reg_write_mask(cam, REG_IMGPITCH, widthuv << 16 | widthy, + IMGP_YP_MASK | IMGP_UVP_MASK); + mcam_reg_write(cam, REG_IMGSIZE, imgsz_h | imgsz_w); + mcam_reg_write(cam, REG_IMGOFFSET, 0x0); + + /* + * Tell the controller about the image format we are using. + */ + switch (fmt->pixelformat) { + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK); + break; + case V4L2_PIX_FMT_YUYV: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK); + break; + case V4L2_PIX_FMT_YVYU: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK); + break; + case V4L2_PIX_FMT_XRGB444: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB | C0_RGBF_444 | C0_RGB4_XBGR, C0_DF_MASK); + break; + case V4L2_PIX_FMT_RGB565: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB | C0_RGBF_565 | C0_RGB5_BGGR, C0_DF_MASK); + break; + case V4L2_PIX_FMT_SBGGR8: + mcam_reg_write_mask(cam, REG_CTRL0, + C0_DF_RGB | C0_RGB5_GRBG, C0_DF_MASK); + break; + default: + cam_err(cam, "camera: unknown format: %#x\n", fmt->pixelformat); + break; + } + + /* + * Make sure it knows we want to use hsync/vsync. + */ + mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK); + /* + * This field controls the generation of EOF(DVP only) + */ + if (cam->bus_type != V4L2_MBUS_CSI2) + mcam_reg_set_bit(cam, REG_CTRL0, + C0_EOF_VSYNC | C0_VEDGE_CTRL); +} + + +/* + * Configure the controller for operation; caller holds the + * device mutex. + */ +static int mcam_ctlr_configure(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_SG_RESTART, &cam->flags); + cam->dma_setup(cam); + mcam_ctlr_image(cam); + mcam_set_config_needed(cam, 0); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +static void mcam_ctlr_irq_enable(struct mcam_camera *cam) +{ + /* + * Clear any pending interrupts, since we do not + * expect to have I/O active prior to enabling. + */ + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); + mcam_reg_set_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + +static void mcam_ctlr_irq_disable(struct mcam_camera *cam) +{ + mcam_reg_clear_bit(cam, REG_IRQMASK, FRAMEIRQS); +} + + + +static void mcam_ctlr_init(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * Make sure it's not powered down. + */ + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + /* + * Turn off the enable bit. It sure should be off anyway, + * but it's good to be sure. + */ + mcam_reg_clear_bit(cam, REG_CTRL0, C0_ENABLE); + /* + * Clock the sensor appropriately. Controller clock should + * be 48MHz, sensor "typical" value is half that. + */ + mcam_reg_write_mask(cam, REG_CLKCTRL, 2, CLK_DIV_MASK); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + + +/* + * Stop the controller, and don't return until we're really sure that no + * further DMA is going on. + */ +static void mcam_ctlr_stop_dma(struct mcam_camera *cam) +{ + unsigned long flags; + + /* + * Theory: stop the camera controller (whether it is operating + * or not). Delay briefly just in case we race with the SOF + * interrupt, then wait until no DMA is active. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_SG_RESTART, &cam->flags); + mcam_ctlr_stop(cam); + cam->state = S_IDLE; + spin_unlock_irqrestore(&cam->dev_lock, flags); + /* + * This is a brutally long sleep, but experience shows that + * it can take the controller a while to get the message that + * it needs to stop grabbing frames. In particular, we can + * sometimes (on mmp) get a frame at the end WITHOUT the + * start-of-frame indication. + */ + msleep(150); + if (test_bit(CF_DMA_ACTIVE, &cam->flags)) + cam_err(cam, "Timeout waiting for DMA to end\n"); + /* This would be bad news - what now? */ + spin_lock_irqsave(&cam->dev_lock, flags); + mcam_ctlr_irq_disable(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* + * Power up and down. + */ +static int mcam_ctlr_power_up(struct mcam_camera *cam) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&cam->dev_lock, flags); + ret = cam->plat_power_up(cam); + if (ret) { + spin_unlock_irqrestore(&cam->dev_lock, flags); + return ret; + } + mcam_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); + spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(5); /* Just to be sure */ + return 0; +} + +static void mcam_ctlr_power_down(struct mcam_camera *cam) +{ + unsigned long flags; + + spin_lock_irqsave(&cam->dev_lock, flags); + /* + * School of hard knocks department: be sure we do any register + * twiddling on the controller *before* calling the platform + * power down routine. + */ + mcam_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); + cam->plat_power_down(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* -------------------------------------------------------------------- */ +/* + * Communications with the sensor. + */ + +static int __mcam_cam_reset(struct mcam_camera *cam) +{ + return sensor_call(cam, core, reset, 0); +} + +/* + * We have found the sensor on the i2c. Let's try to have a + * conversation. + */ +static int mcam_cam_init(struct mcam_camera *cam) +{ + int ret; + + if (cam->state != S_NOTREADY) + cam_warn(cam, "Cam init with device in funky state %d", + cam->state); + ret = __mcam_cam_reset(cam); + /* Get/set parameters? */ + cam->state = S_IDLE; + mcam_ctlr_power_down(cam); + return ret; +} + +/* + * Configure the sensor to match the parameters we have. Caller should + * hold s_mutex + */ +static int mcam_cam_set_flip(struct mcam_camera *cam) +{ + struct v4l2_control ctrl; + + memset(&ctrl, 0, sizeof(ctrl)); + ctrl.id = V4L2_CID_VFLIP; + ctrl.value = flip; + return v4l2_s_ctrl(NULL, cam->sensor->ctrl_handler, &ctrl); +} + + +static int mcam_cam_configure(struct mcam_camera *cam) +{ + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + v4l2_fill_mbus_format(&format.format, &cam->pix_format, cam->mbus_code); + ret = sensor_call(cam, core, init, 0); + if (ret == 0) + ret = sensor_call(cam, pad, set_fmt, NULL, &format); + /* + * OV7670 does weird things if flip is set *before* format... + */ + ret += mcam_cam_set_flip(cam); + return ret; +} + +/* + * Get everything ready, and start grabbing frames. + */ +static int mcam_read_setup(struct mcam_camera *cam) +{ + int ret; + unsigned long flags; + + /* + * Configuration. If we still don't have DMA buffers, + * make one last, desperate attempt. + */ + if (cam->buffer_mode == B_vmalloc && cam->nbufs == 0 && + mcam_alloc_dma_bufs(cam, 0)) + return -ENOMEM; + + if (mcam_needs_config(cam)) { + mcam_cam_configure(cam); + ret = mcam_ctlr_configure(cam); + if (ret) + return ret; + } + + /* + * Turn it loose. + */ + spin_lock_irqsave(&cam->dev_lock, flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + mcam_reset_buffers(cam); + /* + * Update CSI2_DPHY value + */ + if (cam->calc_dphy) + cam->calc_dphy(cam); + cam_dbg(cam, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + cam->dphy[0], cam->dphy[1], cam->dphy[2]); + if (cam->bus_type == V4L2_MBUS_CSI2) + mcam_enable_mipi(cam); + else + mcam_disable_mipi(cam); + mcam_ctlr_irq_enable(cam); + cam->state = S_STREAMING; + if (!test_bit(CF_SG_RESTART, &cam->flags)) + mcam_ctlr_start(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + return 0; +} + +/* ----------------------------------------------------------------------- */ +/* + * Videobuf2 interface code. + */ + +static int mcam_vb_queue_setup(struct vb2_queue *vq, + unsigned int *nbufs, + unsigned int *num_planes, unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + int minbufs = (cam->buffer_mode == B_DMA_contig) ? 3 : 2; + unsigned size = cam->pix_format.sizeimage; + + if (*nbufs < minbufs) + *nbufs = minbufs; + + if (*num_planes) + return sizes[0] < size ? -EINVAL : 0; + sizes[0] = size; + *num_planes = 1; /* Someday we have to support planar formats... */ + return 0; +} + + +static void mcam_vb_buf_queue(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct mcam_vb_buffer *mvb = vb_to_mvb(vbuf); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + unsigned long flags; + int start; + + spin_lock_irqsave(&cam->dev_lock, flags); + start = (cam->state == S_BUFWAIT) && !list_empty(&cam->buffers); + list_add(&mvb->queue, &cam->buffers); + if (cam->state == S_STREAMING && test_bit(CF_SG_RESTART, &cam->flags)) + mcam_sg_restart(cam); + spin_unlock_irqrestore(&cam->dev_lock, flags); + if (start) + mcam_read_setup(cam); +} + +static void mcam_vb_requeue_bufs(struct vb2_queue *vq, + enum vb2_buffer_state state) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + struct mcam_vb_buffer *buf, *node; + unsigned long flags; + unsigned i; + + spin_lock_irqsave(&cam->dev_lock, flags); + list_for_each_entry_safe(buf, node, &cam->buffers, queue) { + vb2_buffer_done(&buf->vb_buf.vb2_buf, state); + list_del(&buf->queue); + } + for (i = 0; i < MAX_DMA_BUFS; i++) { + buf = cam->vb_bufs[i]; + + if (buf) { + vb2_buffer_done(&buf->vb_buf.vb2_buf, state); + cam->vb_bufs[i] = NULL; + } + } + spin_unlock_irqrestore(&cam->dev_lock, flags); +} + +/* + * These need to be called with the mutex held from vb2 + */ +static int mcam_vb_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + unsigned int frame; + int ret; + + if (cam->state != S_IDLE) { + mcam_vb_requeue_bufs(vq, VB2_BUF_STATE_QUEUED); + return -EINVAL; + } + cam->frame_state.frames = 0; + cam->frame_state.singles = 0; + cam->frame_state.delivered = 0; + cam->sequence = 0; + /* + * Videobuf2 sneakily hoards all the buffers and won't + * give them to us until *after* streaming starts. But + * we can't actually start streaming until we have a + * destination. So go into a wait state and hope they + * give us buffers soon. + */ + if (cam->buffer_mode != B_vmalloc && list_empty(&cam->buffers)) { + cam->state = S_BUFWAIT; + return 0; + } + + /* + * Ensure clear the left over frame flags + * before every really start streaming + */ + for (frame = 0; frame < cam->nbufs; frame++) + clear_bit(CF_FRAME_SOF0 + frame, &cam->flags); + + ret = mcam_read_setup(cam); + if (ret) + mcam_vb_requeue_bufs(vq, VB2_BUF_STATE_QUEUED); + return ret; +} + +static void mcam_vb_stop_streaming(struct vb2_queue *vq) +{ + struct mcam_camera *cam = vb2_get_drv_priv(vq); + + cam_dbg(cam, "stop_streaming: %d frames, %d singles, %d delivered\n", + cam->frame_state.frames, cam->frame_state.singles, + cam->frame_state.delivered); + if (cam->state == S_BUFWAIT) { + /* They never gave us buffers */ + cam->state = S_IDLE; + return; + } + if (cam->state != S_STREAMING) + return; + mcam_ctlr_stop_dma(cam); + /* + * Reset the CCIC PHY after stopping streaming, + * otherwise, the CCIC may be unstable. + */ + if (cam->ctlr_reset) + cam->ctlr_reset(cam); + /* + * VB2 reclaims the buffers, so we need to forget + * about them. + */ + mcam_vb_requeue_bufs(vq, VB2_BUF_STATE_ERROR); +} + + +static const struct vb2_ops mcam_vb2_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_queue = mcam_vb_buf_queue, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + + +#ifdef MCAM_MODE_DMA_SG +/* + * Scatter/gather mode uses all of the above functions plus a + * few extras to deal with DMA mapping. + */ +static int mcam_vb_sg_buf_init(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct mcam_vb_buffer *mvb = vb_to_mvb(vbuf); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + mvb->dma_desc = dma_alloc_coherent(cam->dev, + ndesc * sizeof(struct mcam_dma_desc), + &mvb->dma_desc_pa, GFP_KERNEL); + if (mvb->dma_desc == NULL) { + cam_err(cam, "Unable to get DMA descriptor array\n"); + return -ENOMEM; + } + return 0; +} + +static int mcam_vb_sg_buf_prepare(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct mcam_vb_buffer *mvb = vb_to_mvb(vbuf); + struct sg_table *sg_table = vb2_dma_sg_plane_desc(vb, 0); + struct mcam_dma_desc *desc = mvb->dma_desc; + struct scatterlist *sg; + int i; + + for_each_sg(sg_table->sgl, sg, sg_table->nents, i) { + desc->dma_addr = sg_dma_address(sg); + desc->segment_len = sg_dma_len(sg); + desc++; + } + return 0; +} + +static void mcam_vb_sg_buf_cleanup(struct vb2_buffer *vb) +{ + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); + struct mcam_camera *cam = vb2_get_drv_priv(vb->vb2_queue); + struct mcam_vb_buffer *mvb = vb_to_mvb(vbuf); + int ndesc = cam->pix_format.sizeimage/PAGE_SIZE + 1; + + dma_free_coherent(cam->dev, ndesc * sizeof(struct mcam_dma_desc), + mvb->dma_desc, mvb->dma_desc_pa); +} + + +static const struct vb2_ops mcam_vb2_sg_ops = { + .queue_setup = mcam_vb_queue_setup, + .buf_init = mcam_vb_sg_buf_init, + .buf_prepare = mcam_vb_sg_buf_prepare, + .buf_queue = mcam_vb_buf_queue, + .buf_cleanup = mcam_vb_sg_buf_cleanup, + .start_streaming = mcam_vb_start_streaming, + .stop_streaming = mcam_vb_stop_streaming, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, +}; + +#endif /* MCAM_MODE_DMA_SG */ + +static int mcam_setup_vb2(struct mcam_camera *cam) +{ + struct vb2_queue *vq = &cam->vb_queue; + + memset(vq, 0, sizeof(*vq)); + vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + vq->drv_priv = cam; + vq->lock = &cam->s_mutex; + vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ; + vq->buf_struct_size = sizeof(struct mcam_vb_buffer); + vq->dev = cam->dev; + INIT_LIST_HEAD(&cam->buffers); + switch (cam->buffer_mode) { + case B_DMA_contig: +#ifdef MCAM_MODE_DMA_CONTIG + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_dma_contig_memops; + cam->dma_setup = mcam_ctlr_dma_contig; + cam->frame_complete = mcam_dma_contig_done; +#endif + break; + case B_DMA_sg: +#ifdef MCAM_MODE_DMA_SG + vq->ops = &mcam_vb2_sg_ops; + vq->mem_ops = &vb2_dma_sg_memops; + cam->dma_setup = mcam_ctlr_dma_sg; + cam->frame_complete = mcam_dma_sg_done; +#endif + break; + case B_vmalloc: +#ifdef MCAM_MODE_VMALLOC + tasklet_init(&cam->s_tasklet, mcam_frame_tasklet, + (unsigned long) cam); + vq->ops = &mcam_vb2_ops; + vq->mem_ops = &vb2_vmalloc_memops; + cam->dma_setup = mcam_ctlr_dma_vmalloc; + cam->frame_complete = mcam_vmalloc_done; +#endif + break; + } + return vb2_queue_init(vq); +} + + +/* ---------------------------------------------------------------------- */ +/* + * The long list of V4L2 ioctl() operations. + */ + +static int mcam_vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct mcam_camera *cam = video_drvdata(file); + + strcpy(cap->driver, "marvell_ccic"); + strcpy(cap->card, "marvell_ccic"); + strlcpy(cap->bus_info, cam->bus_info, sizeof(cap->bus_info)); + cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | V4L2_CAP_STREAMING; + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; + return 0; +} + + +static int mcam_vidioc_enum_fmt_vid_cap(struct file *filp, + void *priv, struct v4l2_fmtdesc *fmt) +{ + if (fmt->index >= N_MCAM_FMTS) + return -EINVAL; + strlcpy(fmt->description, mcam_formats[fmt->index].desc, + sizeof(fmt->description)); + fmt->pixelformat = mcam_formats[fmt->index].pixelformat; + return 0; +} + +static int mcam_vidioc_try_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = video_drvdata(filp); + struct mcam_format_struct *f; + struct v4l2_pix_format *pix = &fmt->fmt.pix; + struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_format format = { + .which = V4L2_SUBDEV_FORMAT_TRY, + }; + int ret; + + f = mcam_find_format(pix->pixelformat); + pix->pixelformat = f->pixelformat; + v4l2_fill_mbus_format(&format.format, pix, f->mbus_code); + ret = sensor_call(cam, pad, set_fmt, &pad_cfg, &format); + v4l2_fill_pix_format(pix, &format.format); + pix->bytesperline = pix->width * f->bpp; + switch (f->pixelformat) { + case V4L2_PIX_FMT_YUV420: + case V4L2_PIX_FMT_YVU420: + pix->sizeimage = pix->height * pix->bytesperline * 3 / 2; + break; + default: + pix->sizeimage = pix->height * pix->bytesperline; + break; + } + pix->colorspace = V4L2_COLORSPACE_SRGB; + return ret; +} + +static int mcam_vidioc_s_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *fmt) +{ + struct mcam_camera *cam = video_drvdata(filp); + struct mcam_format_struct *f; + int ret; + + /* + * Can't do anything if the device is not idle + * Also can't if there are streaming buffers in place. + */ + if (cam->state != S_IDLE || vb2_is_busy(&cam->vb_queue)) + return -EBUSY; + + f = mcam_find_format(fmt->fmt.pix.pixelformat); + + /* + * See if the formatting works in principle. + */ + ret = mcam_vidioc_try_fmt_vid_cap(filp, priv, fmt); + if (ret) + return ret; + /* + * Now we start to change things for real, so let's do it + * under lock. + */ + cam->pix_format = fmt->fmt.pix; + cam->mbus_code = f->mbus_code; + + /* + * Make sure we have appropriate DMA buffers. + */ + if (cam->buffer_mode == B_vmalloc) { + ret = mcam_check_dma_buffers(cam); + if (ret) + goto out; + } + mcam_set_config_needed(cam, 1); +out: + return ret; +} + +/* + * Return our stored notion of how the camera is/should be configured. + * The V4l2 spec wants us to be smarter, and actually get this from + * the camera (and not mess with it at open time). Someday. + */ +static int mcam_vidioc_g_fmt_vid_cap(struct file *filp, void *priv, + struct v4l2_format *f) +{ + struct mcam_camera *cam = video_drvdata(filp); + + f->fmt.pix = cam->pix_format; + return 0; +} + +/* + * We only have one input - the sensor - so minimize the nonsense here. + */ +static int mcam_vidioc_enum_input(struct file *filp, void *priv, + struct v4l2_input *input) +{ + if (input->index != 0) + return -EINVAL; + + input->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(input->name, "Camera"); + return 0; +} + +static int mcam_vidioc_g_input(struct file *filp, void *priv, unsigned int *i) +{ + *i = 0; + return 0; +} + +static int mcam_vidioc_s_input(struct file *filp, void *priv, unsigned int i) +{ + if (i != 0) + return -EINVAL; + return 0; +} + +/* + * G/S_PARM. Most of this is done by the sensor, but we are + * the level which controls the number of read buffers. + */ +static int mcam_vidioc_g_parm(struct file *filp, void *priv, + struct v4l2_streamparm *a) +{ + struct mcam_camera *cam = video_drvdata(filp); + int ret; + + ret = v4l2_g_parm_cap(video_devdata(filp), cam->sensor, a); + a->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_s_parm(struct file *filp, void *priv, + struct v4l2_streamparm *a) +{ + struct mcam_camera *cam = video_drvdata(filp); + int ret; + + ret = v4l2_s_parm_cap(video_devdata(filp), cam->sensor, a); + a->parm.capture.readbuffers = n_dma_bufs; + return ret; +} + +static int mcam_vidioc_enum_framesizes(struct file *filp, void *priv, + struct v4l2_frmsizeenum *sizes) +{ + struct mcam_camera *cam = video_drvdata(filp); + struct mcam_format_struct *f; + struct v4l2_subdev_frame_size_enum fse = { + .index = sizes->index, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + f = mcam_find_format(sizes->pixel_format); + if (f->pixelformat != sizes->pixel_format) + return -EINVAL; + fse.code = f->mbus_code; + ret = sensor_call(cam, pad, enum_frame_size, NULL, &fse); + if (ret) + return ret; + if (fse.min_width == fse.max_width && + fse.min_height == fse.max_height) { + sizes->type = V4L2_FRMSIZE_TYPE_DISCRETE; + sizes->discrete.width = fse.min_width; + sizes->discrete.height = fse.min_height; + return 0; + } + sizes->type = V4L2_FRMSIZE_TYPE_CONTINUOUS; + sizes->stepwise.min_width = fse.min_width; + sizes->stepwise.max_width = fse.max_width; + sizes->stepwise.min_height = fse.min_height; + sizes->stepwise.max_height = fse.max_height; + sizes->stepwise.step_width = 1; + sizes->stepwise.step_height = 1; + return 0; +} + +static int mcam_vidioc_enum_frameintervals(struct file *filp, void *priv, + struct v4l2_frmivalenum *interval) +{ + struct mcam_camera *cam = video_drvdata(filp); + struct mcam_format_struct *f; + struct v4l2_subdev_frame_interval_enum fie = { + .index = interval->index, + .width = interval->width, + .height = interval->height, + .which = V4L2_SUBDEV_FORMAT_ACTIVE, + }; + int ret; + + f = mcam_find_format(interval->pixel_format); + if (f->pixelformat != interval->pixel_format) + return -EINVAL; + fie.code = f->mbus_code; + ret = sensor_call(cam, pad, enum_frame_interval, NULL, &fie); + if (ret) + return ret; + interval->type = V4L2_FRMIVAL_TYPE_DISCRETE; + interval->discrete = fie.interval; + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int mcam_vidioc_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = video_drvdata(file); + + if (reg->reg > cam->regs_size - 4) + return -EINVAL; + reg->val = mcam_reg_read(cam, reg->reg); + reg->size = 4; + return 0; +} + +static int mcam_vidioc_s_register(struct file *file, void *priv, + const struct v4l2_dbg_register *reg) +{ + struct mcam_camera *cam = video_drvdata(file); + + if (reg->reg > cam->regs_size - 4) + return -EINVAL; + mcam_reg_write(cam, reg->reg, reg->val); + return 0; +} +#endif + +static const struct v4l2_ioctl_ops mcam_v4l_ioctl_ops = { + .vidioc_querycap = mcam_vidioc_querycap, + .vidioc_enum_fmt_vid_cap = mcam_vidioc_enum_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = mcam_vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = mcam_vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = mcam_vidioc_g_fmt_vid_cap, + .vidioc_enum_input = mcam_vidioc_enum_input, + .vidioc_g_input = mcam_vidioc_g_input, + .vidioc_s_input = mcam_vidioc_s_input, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + .vidioc_g_parm = mcam_vidioc_g_parm, + .vidioc_s_parm = mcam_vidioc_s_parm, + .vidioc_enum_framesizes = mcam_vidioc_enum_framesizes, + .vidioc_enum_frameintervals = mcam_vidioc_enum_frameintervals, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = mcam_vidioc_g_register, + .vidioc_s_register = mcam_vidioc_s_register, +#endif +}; + +/* ---------------------------------------------------------------------- */ +/* + * Our various file operations. + */ +static int mcam_v4l_open(struct file *filp) +{ + struct mcam_camera *cam = video_drvdata(filp); + int ret; + + mutex_lock(&cam->s_mutex); + ret = v4l2_fh_open(filp); + if (ret) + goto out; + if (v4l2_fh_is_singular_file(filp)) { + ret = mcam_ctlr_power_up(cam); + if (ret) + goto out; + __mcam_cam_reset(cam); + mcam_set_config_needed(cam, 1); + } +out: + mutex_unlock(&cam->s_mutex); + if (ret) + v4l2_fh_release(filp); + return ret; +} + + +static int mcam_v4l_release(struct file *filp) +{ + struct mcam_camera *cam = video_drvdata(filp); + bool last_open; + + mutex_lock(&cam->s_mutex); + last_open = v4l2_fh_is_singular_file(filp); + _vb2_fop_release(filp, NULL); + if (last_open) { + mcam_disable_mipi(cam); + mcam_ctlr_power_down(cam); + if (cam->buffer_mode == B_vmalloc && alloc_bufs_at_read) + mcam_free_dma_bufs(cam); + } + + mutex_unlock(&cam->s_mutex); + return 0; +} + +static const struct v4l2_file_operations mcam_v4l_fops = { + .owner = THIS_MODULE, + .open = mcam_v4l_open, + .release = mcam_v4l_release, + .read = vb2_fop_read, + .poll = vb2_fop_poll, + .mmap = vb2_fop_mmap, + .unlocked_ioctl = video_ioctl2, +}; + + +/* + * This template device holds all of those v4l2 methods; we + * clone it for specific real devices. + */ +static const struct video_device mcam_v4l_template = { + .name = "mcam", + .fops = &mcam_v4l_fops, + .ioctl_ops = &mcam_v4l_ioctl_ops, + .release = video_device_release_empty, +}; + +/* ---------------------------------------------------------------------- */ +/* + * Interrupt handler stuff + */ +static void mcam_frame_complete(struct mcam_camera *cam, int frame) +{ + /* + * Basic frame housekeeping. + */ + set_bit(frame, &cam->flags); + clear_bit(CF_DMA_ACTIVE, &cam->flags); + cam->next_buf = frame; + cam->buf_seq[frame] = cam->sequence++; + cam->frame_state.frames++; + /* + * "This should never happen" + */ + if (cam->state != S_STREAMING) + return; + /* + * Process the frame and set up the next one. + */ + cam->frame_complete(cam, frame); +} + + +/* + * The interrupt handler; this needs to be called from the + * platform irq handler with the lock held. + */ +int mccic_irq(struct mcam_camera *cam, unsigned int irqs) +{ + unsigned int frame, handled = 0; + + mcam_reg_write(cam, REG_IRQSTAT, FRAMEIRQS); /* Clear'em all */ + /* + * Handle any frame completions. There really should + * not be more than one of these, or we have fallen + * far behind. + * + * When running in S/G mode, the frame number lacks any + * real meaning - there's only one descriptor array - but + * the controller still picks a different one to signal + * each time. + */ + for (frame = 0; frame < cam->nbufs; frame++) + if (irqs & (IRQ_EOF0 << frame) && + test_bit(CF_FRAME_SOF0 + frame, &cam->flags)) { + mcam_frame_complete(cam, frame); + handled = 1; + clear_bit(CF_FRAME_SOF0 + frame, &cam->flags); + if (cam->buffer_mode == B_DMA_sg) + break; + } + /* + * If a frame starts, note that we have DMA active. This + * code assumes that we won't get multiple frame interrupts + * at once; may want to rethink that. + */ + for (frame = 0; frame < cam->nbufs; frame++) { + if (irqs & (IRQ_SOF0 << frame)) { + set_bit(CF_FRAME_SOF0 + frame, &cam->flags); + handled = IRQ_HANDLED; + } + } + + if (handled == IRQ_HANDLED) { + set_bit(CF_DMA_ACTIVE, &cam->flags); + if (cam->buffer_mode == B_DMA_sg) + mcam_ctlr_stop(cam); + } + return handled; +} +EXPORT_SYMBOL_GPL(mccic_irq); + +/* ---------------------------------------------------------------------- */ +/* + * Registration and such. + */ +static struct ov7670_config sensor_cfg = { + /* + * Exclude QCIF mode, because it only captures a tiny portion + * of the sensor FOV + */ + .min_width = 320, + .min_height = 240, +}; + + +int mccic_register(struct mcam_camera *cam) +{ + struct i2c_board_info ov7670_info = { + .type = "ov7670", + .addr = 0x42 >> 1, + .platform_data = &sensor_cfg, + }; + int ret; + + /* + * Validate the requested buffer mode. + */ + if (buffer_mode >= 0) + cam->buffer_mode = buffer_mode; + if (cam->buffer_mode == B_DMA_sg && + cam->chip_id == MCAM_CAFE) { + printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n"); + cam->buffer_mode = B_vmalloc; + } + if (!mcam_buffer_mode_supported(cam->buffer_mode)) { + printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n", + cam->buffer_mode); + return -EINVAL; + } + /* + * Register with V4L + */ + ret = v4l2_device_register(cam->dev, &cam->v4l2_dev); + if (ret) + return ret; + + mutex_init(&cam->s_mutex); + cam->state = S_NOTREADY; + mcam_set_config_needed(cam, 1); + cam->pix_format = mcam_def_pix_format; + cam->mbus_code = mcam_def_mbus_code; + mcam_ctlr_init(cam); + + /* + * Get the v4l2 setup done. + */ + ret = v4l2_ctrl_handler_init(&cam->ctrl_handler, 10); + if (ret) + goto out_unregister; + cam->v4l2_dev.ctrl_handler = &cam->ctrl_handler; + + /* + * Try to find the sensor. + */ + sensor_cfg.clock_speed = cam->clock_speed; + sensor_cfg.use_smbus = cam->use_smbus; + cam->sensor_addr = ov7670_info.addr; + cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, + cam->i2c_adapter, &ov7670_info, NULL); + if (cam->sensor == NULL) { + ret = -ENODEV; + goto out_unregister; + } + + ret = mcam_cam_init(cam); + if (ret) + goto out_unregister; + + ret = mcam_setup_vb2(cam); + if (ret) + goto out_unregister; + + mutex_lock(&cam->s_mutex); + cam->vdev = mcam_v4l_template; + cam->vdev.v4l2_dev = &cam->v4l2_dev; + cam->vdev.lock = &cam->s_mutex; + cam->vdev.queue = &cam->vb_queue; + video_set_drvdata(&cam->vdev, cam); + ret = video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1); + if (ret) { + mutex_unlock(&cam->s_mutex); + goto out_unregister; + } + + /* + * If so requested, try to get our DMA buffers now. + */ + if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) { + if (mcam_alloc_dma_bufs(cam, 1)) + cam_warn(cam, "Unable to alloc DMA buffers at load will try again later."); + } + + mutex_unlock(&cam->s_mutex); + return 0; + +out_unregister: + v4l2_ctrl_handler_free(&cam->ctrl_handler); + v4l2_device_unregister(&cam->v4l2_dev); + return ret; +} +EXPORT_SYMBOL_GPL(mccic_register); + +void mccic_shutdown(struct mcam_camera *cam) +{ + /* + * If we have no users (and we really, really should have no + * users) the device will already be powered down. Trying to + * take it down again will wedge the machine, which is frowned + * upon. + */ + if (!list_empty(&cam->vdev.fh_list)) { + cam_warn(cam, "Removing a device with users!\n"); + mcam_ctlr_power_down(cam); + } + if (cam->buffer_mode == B_vmalloc) + mcam_free_dma_bufs(cam); + video_unregister_device(&cam->vdev); + v4l2_ctrl_handler_free(&cam->ctrl_handler); + v4l2_device_unregister(&cam->v4l2_dev); +} +EXPORT_SYMBOL_GPL(mccic_shutdown); + +/* + * Power management + */ +#ifdef CONFIG_PM + +void mccic_suspend(struct mcam_camera *cam) +{ + mutex_lock(&cam->s_mutex); + if (!list_empty(&cam->vdev.fh_list)) { + enum mcam_state cstate = cam->state; + + mcam_ctlr_stop_dma(cam); + mcam_ctlr_power_down(cam); + cam->state = cstate; + } + mutex_unlock(&cam->s_mutex); +} +EXPORT_SYMBOL_GPL(mccic_suspend); + +int mccic_resume(struct mcam_camera *cam) +{ + int ret = 0; + + mutex_lock(&cam->s_mutex); + if (!list_empty(&cam->vdev.fh_list)) { + ret = mcam_ctlr_power_up(cam); + if (ret) { + mutex_unlock(&cam->s_mutex); + return ret; + } + __mcam_cam_reset(cam); + } else { + mcam_ctlr_power_down(cam); + } + mutex_unlock(&cam->s_mutex); + + set_bit(CF_CONFIG_NEEDED, &cam->flags); + if (cam->state == S_STREAMING) { + /* + * If there was a buffer in the DMA engine at suspend + * time, put it back on the queue or we'll forget about it. + */ + if (cam->buffer_mode == B_DMA_sg && cam->vb_bufs[0]) + list_add(&cam->vb_bufs[0]->queue, &cam->buffers); + ret = mcam_read_setup(cam); + } + return ret; +} +EXPORT_SYMBOL_GPL(mccic_resume); +#endif /* CONFIG_PM */ + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Jonathan Corbet "); diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h b/drivers/media/platform/marvell-ccic/mcam-core.h new file mode 100644 index 000000000..ad8955f9f --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mcam-core.h @@ -0,0 +1,383 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Marvell camera core structures. + * + * Copyright 2011 Jonathan Corbet corbet@lwn.net + */ +#ifndef _MCAM_CORE_H +#define _MCAM_CORE_H + +#include +#include +#include +#include +#include + +/* + * Create our own symbols for the supported buffer modes, but, for now, + * base them entirely on which videobuf2 options have been selected. + */ +#if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC) +#define MCAM_MODE_VMALLOC 1 +#endif + +#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_CONTIG) +#define MCAM_MODE_DMA_CONTIG 1 +#endif + +#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_SG) +#define MCAM_MODE_DMA_SG 1 +#endif + +#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \ + !defined(MCAM_MODE_DMA_SG) +#error One of the videobuf buffer modes must be selected in the config +#endif + + +enum mcam_state { + S_NOTREADY, /* Not yet initialized */ + S_IDLE, /* Just hanging around */ + S_FLAKED, /* Some sort of problem */ + S_STREAMING, /* Streaming data */ + S_BUFWAIT /* streaming requested but no buffers yet */ +}; +#define MAX_DMA_BUFS 3 + +/* + * Different platforms work best with different buffer modes, so we + * let the platform pick. + */ +enum mcam_buffer_mode { + B_vmalloc = 0, + B_DMA_contig = 1, + B_DMA_sg = 2 +}; + +enum mcam_chip_id { + MCAM_CAFE, + MCAM_ARMADA610, +}; + +/* + * Is a given buffer mode supported by the current kernel configuration? + */ +static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode) +{ + switch (mode) { +#ifdef MCAM_MODE_VMALLOC + case B_vmalloc: +#endif +#ifdef MCAM_MODE_DMA_CONTIG + case B_DMA_contig: +#endif +#ifdef MCAM_MODE_DMA_SG + case B_DMA_sg: +#endif + return 1; + default: + return 0; + } +} + +/* + * Basic frame states + */ +struct mcam_frame_state { + unsigned int frames; + unsigned int singles; + unsigned int delivered; +}; + +#define NR_MCAM_CLK 3 + +/* + * A description of one of our devices. + * Locking: controlled by s_mutex. Certain fields, however, require + * the dev_lock spinlock; they are marked as such by comments. + * dev_lock is also required for access to device registers. + */ +struct mcam_camera { + /* + * These fields should be set by the platform code prior to + * calling mcam_register(). + */ + struct i2c_adapter *i2c_adapter; + unsigned char __iomem *regs; + unsigned regs_size; /* size in bytes of the register space */ + spinlock_t dev_lock; + struct device *dev; /* For messages, dma alloc */ + enum mcam_chip_id chip_id; + short int clock_speed; /* Sensor clock speed, default 30 */ + short int use_smbus; /* SMBUS or straight I2c? */ + enum mcam_buffer_mode buffer_mode; + + int mclk_min; /* The minimal value of mclk */ + int mclk_src; /* which clock source the mclk derives from */ + int mclk_div; /* Clock Divider Value for MCLK */ + + int ccic_id; + enum v4l2_mbus_type bus_type; + /* MIPI support */ + /* The dphy config value, allocated in board file + * dphy[0]: DPHY3 + * dphy[1]: DPHY5 + * dphy[2]: DPHY6 + */ + int *dphy; + bool mipi_enabled; /* flag whether mipi is enabled already */ + int lane; /* lane number */ + + /* clock tree support */ + struct clk *clk[NR_MCAM_CLK]; + + /* + * Callbacks from the core to the platform code. + */ + int (*plat_power_up) (struct mcam_camera *cam); + void (*plat_power_down) (struct mcam_camera *cam); + void (*calc_dphy) (struct mcam_camera *cam); + void (*ctlr_reset) (struct mcam_camera *cam); + + /* + * Everything below here is private to the mcam core and + * should not be touched by the platform code. + */ + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + enum mcam_state state; + unsigned long flags; /* Buffer status, mainly (dev_lock) */ + + struct mcam_frame_state frame_state; /* Frame state counter */ + /* + * Subsystem structures. + */ + struct video_device vdev; + struct v4l2_subdev *sensor; + unsigned short sensor_addr; + + /* Videobuf2 stuff */ + struct vb2_queue vb_queue; + struct list_head buffers; /* Available frames */ + + unsigned int nbufs; /* How many are alloc'd */ + int next_buf; /* Next to consume (dev_lock) */ + + char bus_info[32]; /* querycap bus_info */ + + /* DMA buffers - vmalloc mode */ +#ifdef MCAM_MODE_VMALLOC + unsigned int dma_buf_size; /* allocated size */ + void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */ + dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */ + struct tasklet_struct s_tasklet; +#endif + unsigned int sequence; /* Frame sequence number */ + unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */ + + /* DMA buffers - DMA modes */ + struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS]; + + /* Mode-specific ops, set at open time */ + void (*dma_setup)(struct mcam_camera *cam); + void (*frame_complete)(struct mcam_camera *cam, int frame); + + /* Current operating parameters */ + struct v4l2_pix_format pix_format; + u32 mbus_code; + + /* Locks */ + struct mutex s_mutex; /* Access to this structure */ +}; + + +/* + * Register I/O functions. These are here because the platform code + * may legitimately need to mess with the register space. + */ +/* + * Device register I/O + */ +static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg, + unsigned int val) +{ + iowrite32(val, cam->regs + reg); +} + +static inline unsigned int mcam_reg_read(struct mcam_camera *cam, + unsigned int reg) +{ + return ioread32(cam->regs + reg); +} + + +static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg, + unsigned int val, unsigned int mask) +{ + unsigned int v = mcam_reg_read(cam, reg); + + v = (v & ~mask) | (val & mask); + mcam_reg_write(cam, reg, v); +} + +static inline void mcam_reg_clear_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, 0, val); +} + +static inline void mcam_reg_set_bit(struct mcam_camera *cam, + unsigned int reg, unsigned int val) +{ + mcam_reg_write_mask(cam, reg, val, val); +} + +/* + * Functions for use by platform code. + */ +int mccic_register(struct mcam_camera *cam); +int mccic_irq(struct mcam_camera *cam, unsigned int irqs); +void mccic_shutdown(struct mcam_camera *cam); +#ifdef CONFIG_PM +void mccic_suspend(struct mcam_camera *cam); +int mccic_resume(struct mcam_camera *cam); +#endif + +/* + * Register definitions for the m88alp01 camera interface. Offsets in bytes + * as given in the spec. + */ +#define REG_Y0BAR 0x00 +#define REG_Y1BAR 0x04 +#define REG_Y2BAR 0x08 +#define REG_U0BAR 0x0c +#define REG_U1BAR 0x10 +#define REG_U2BAR 0x14 +#define REG_V0BAR 0x18 +#define REG_V1BAR 0x1C +#define REG_V2BAR 0x20 + +/* + * register definitions for MIPI support + */ +#define REG_CSI2_CTRL0 0x100 +#define CSI2_C0_MIPI_EN (0x1 << 0) +#define CSI2_C0_ACT_LANE(n) ((n-1) << 1) +#define REG_CSI2_DPHY3 0x12c +#define REG_CSI2_DPHY5 0x134 +#define REG_CSI2_DPHY6 0x138 + +/* ... */ + +#define REG_IMGPITCH 0x24 /* Image pitch register */ +#define IMGP_YP_SHFT 2 /* Y pitch params */ +#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */ +#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */ +#define IMGP_UVP_MASK 0x3ffc0000 +#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */ +#define IRQ_EOF0 0x00000001 /* End of frame 0 */ +#define IRQ_EOF1 0x00000002 /* End of frame 1 */ +#define IRQ_EOF2 0x00000004 /* End of frame 2 */ +#define IRQ_SOF0 0x00000008 /* Start of frame 0 */ +#define IRQ_SOF1 0x00000010 /* Start of frame 1 */ +#define IRQ_SOF2 0x00000020 /* Start of frame 2 */ +#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */ +#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */ +#define IRQ_TWSIR 0x00020000 /* TWSI read */ +#define IRQ_TWSIE 0x00040000 /* TWSI error */ +#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE) +#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2) +#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW) +#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */ +#define REG_IRQSTAT 0x30 /* IRQ status / clear */ + +#define REG_IMGSIZE 0x34 /* Image size */ +#define IMGSZ_V_MASK 0x1fff0000 +#define IMGSZ_V_SHIFT 16 +#define IMGSZ_H_MASK 0x00003fff +#define REG_IMGOFFSET 0x38 /* IMage offset */ + +#define REG_CTRL0 0x3c /* Control 0 */ +#define C0_ENABLE 0x00000001 /* Makes the whole thing go */ + +/* Mask for all the format bits */ +#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */ + +/* RGB ordering */ +#define C0_RGB4_RGBX 0x00000000 +#define C0_RGB4_XRGB 0x00000004 +#define C0_RGB4_BGRX 0x00000008 +#define C0_RGB4_XBGR 0x0000000c +#define C0_RGB5_RGGB 0x00000000 +#define C0_RGB5_GRBG 0x00000004 +#define C0_RGB5_GBRG 0x00000008 +#define C0_RGB5_BGGR 0x0000000c + +/* Spec has two fields for DIN and DOUT, but they must match, so + combine them here. */ +#define C0_DF_YUV 0x00000000 /* Data is YUV */ +#define C0_DF_RGB 0x000000a0 /* ... RGB */ +#define C0_DF_BAYER 0x00000140 /* ... Bayer */ +/* 8-8-8 must be missing from the below - ask */ +#define C0_RGBF_565 0x00000000 +#define C0_RGBF_444 0x00000800 +#define C0_RGB_BGR 0x00001000 /* Blue comes first */ +#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */ +#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */ +#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */ +/* Think that 420 packed must be 111 - ask */ +#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */ +#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */ +#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */ +#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */ +#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */ +#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */ +#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */ +#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */ +/* Bayer bits 18,19 if needed */ +#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */ +#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */ +#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */ +#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */ +#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */ +#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */ +/* SIFMODE */ +#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */ +#define C0_SOF_NOSYNC 0x40000000 /* Use inband active signaling */ +#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */ + +/* Bits below C1_444ALPHA are not present in Cafe */ +#define REG_CTRL1 0x40 /* Control 1 */ +#define C1_CLKGATE 0x00000001 /* Sensor clock gate */ +#define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */ +#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */ +#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */ +#define C1_ALPHA_SHFT 20 +#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */ +#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */ +#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */ +#define C1_DMAB_MASK 0x06000000 +#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */ +#define C1_PWRDWN 0x10000000 /* Power down */ + +#define REG_CLKCTRL 0x88 /* Clock control */ +#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */ + +/* This appears to be a Cafe-only register */ +#define REG_UBAR 0xc4 /* Upper base address register */ + +/* Armada 610 DMA descriptor registers */ +#define REG_DMA_DESC_Y 0x200 +#define REG_DMA_DESC_U 0x204 +#define REG_DMA_DESC_V 0x208 +#define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */ +#define REG_DESC_LEN_U 0x210 +#define REG_DESC_LEN_V 0x214 + +/* + * Useful stuff that probably belongs somewhere global. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +#endif /* _MCAM_CORE_H */ diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c new file mode 100644 index 000000000..6d9f0abb2 --- /dev/null +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c @@ -0,0 +1,537 @@ +/* + * Support for the camera device found on Marvell MMP processors; known + * to work with the Armada 610 as used in the OLPC 1.75 system. + * + * Copyright 2011 Jonathan Corbet + * + * This file may be distributed under the terms of the GNU General + * Public License, version 2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcam-core.h" + +MODULE_ALIAS("platform:mmp-camera"); +MODULE_AUTHOR("Jonathan Corbet "); +MODULE_LICENSE("GPL"); + +static char *mcam_clks[] = {"CCICAXICLK", "CCICFUNCLK", "CCICPHYCLK"}; + +struct mmp_camera { + void __iomem *power_regs; + struct platform_device *pdev; + struct mcam_camera mcam; + struct list_head devlist; + struct clk *mipi_clk; + int irq; +}; + +static inline struct mmp_camera *mcam_to_cam(struct mcam_camera *mcam) +{ + return container_of(mcam, struct mmp_camera, mcam); +} + +/* + * A silly little infrastructure so we can keep track of our devices. + * Chances are that we will never have more than one of them, but + * the Armada 610 *does* have two controllers... + */ + +static LIST_HEAD(mmpcam_devices); +static struct mutex mmpcam_devices_lock; + +static void mmpcam_add_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_add(&cam->devlist, &mmpcam_devices); + mutex_unlock(&mmpcam_devices_lock); +} + +static void mmpcam_remove_device(struct mmp_camera *cam) +{ + mutex_lock(&mmpcam_devices_lock); + list_del(&cam->devlist); + mutex_unlock(&mmpcam_devices_lock); +} + +/* + * Platform dev remove passes us a platform_device, and there's + * no handy unused drvdata to stash a backpointer in. So just + * dig it out of our list. + */ +static struct mmp_camera *mmpcam_find_device(struct platform_device *pdev) +{ + struct mmp_camera *cam; + + mutex_lock(&mmpcam_devices_lock); + list_for_each_entry(cam, &mmpcam_devices, devlist) { + if (cam->pdev == pdev) { + mutex_unlock(&mmpcam_devices_lock); + return cam; + } + } + mutex_unlock(&mmpcam_devices_lock); + return NULL; +} + + + + +/* + * Power-related registers; this almost certainly belongs + * somewhere else. + * + * ARMADA 610 register manual, sec 7.2.1, p1842. + */ +#define CPU_SUBSYS_PMU_BASE 0xd4282800 +#define REG_CCIC_DCGCR 0x28 /* CCIC dyn clock gate ctrl reg */ +#define REG_CCIC_CRCR 0x50 /* CCIC clk reset ctrl reg */ +#define REG_CCIC2_CRCR 0xf4 /* CCIC2 clk reset ctrl reg */ + +static void mcam_clk_enable(struct mcam_camera *mcam) +{ + unsigned int i; + + for (i = 0; i < NR_MCAM_CLK; i++) { + if (!IS_ERR(mcam->clk[i])) + clk_prepare_enable(mcam->clk[i]); + } +} + +static void mcam_clk_disable(struct mcam_camera *mcam) +{ + int i; + + for (i = NR_MCAM_CLK - 1; i >= 0; i--) { + if (!IS_ERR(mcam->clk[i])) + clk_disable_unprepare(mcam->clk[i]); + } +} + +/* + * Power control. + */ +static void mmpcam_power_up_ctlr(struct mmp_camera *cam) +{ + iowrite32(0x3f, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0x3805b, cam->power_regs + REG_CCIC_CRCR); + mdelay(1); +} + +static int mmpcam_power_up(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; + +/* + * Turn on power and clocks to the controller. + */ + mmpcam_power_up_ctlr(cam); +/* + * Provide power to the sensor. + */ + mcam_reg_write(mcam, REG_CLKCTRL, 0x60000002); + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 1); + mdelay(5); + mcam_reg_clear_bit(mcam, REG_CTRL1, 0x10000000); + gpio_set_value(pdata->sensor_reset_gpio, 0); /* reset is active low */ + mdelay(5); + gpio_set_value(pdata->sensor_reset_gpio, 1); /* reset is active low */ + mdelay(5); + + mcam_clk_enable(mcam); + + return 0; +} + +static void mmpcam_power_down(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata; +/* + * Turn off clocks and set reset lines + */ + iowrite32(0, cam->power_regs + REG_CCIC_DCGCR); + iowrite32(0, cam->power_regs + REG_CCIC_CRCR); +/* + * Shut down the sensor. + */ + pdata = cam->pdev->dev.platform_data; + gpio_set_value(pdata->sensor_power_gpio, 0); + gpio_set_value(pdata->sensor_reset_gpio, 0); + + mcam_clk_disable(mcam); +} + +static void mcam_ctlr_reset(struct mcam_camera *mcam) +{ + unsigned long val; + struct mmp_camera *cam = mcam_to_cam(mcam); + + if (mcam->ccic_id) { + /* + * Using CCIC2 + */ + val = ioread32(cam->power_regs + REG_CCIC2_CRCR); + iowrite32(val & ~0x2, cam->power_regs + REG_CCIC2_CRCR); + iowrite32(val | 0x2, cam->power_regs + REG_CCIC2_CRCR); + } else { + /* + * Using CCIC1 + */ + val = ioread32(cam->power_regs + REG_CCIC_CRCR); + iowrite32(val & ~0x2, cam->power_regs + REG_CCIC_CRCR); + iowrite32(val | 0x2, cam->power_regs + REG_CCIC_CRCR); + } +} + +/* + * calc the dphy register values + * There are three dphy registers being used. + * dphy[0] - CSI2_DPHY3 + * dphy[1] - CSI2_DPHY5 + * dphy[2] - CSI2_DPHY6 + * CSI2_DPHY3 and CSI2_DPHY6 can be set with a default value + * or be calculated dynamically + */ +static void mmpcam_calc_dphy(struct mcam_camera *mcam) +{ + struct mmp_camera *cam = mcam_to_cam(mcam); + struct mmp_camera_platform_data *pdata = cam->pdev->dev.platform_data; + struct device *dev = &cam->pdev->dev; + unsigned long tx_clk_esc; + + /* + * If CSI2_DPHY3 is calculated dynamically, + * pdata->lane_clk should be already set + * either in the board driver statically + * or in the sensor driver dynamically. + */ + /* + * dphy[0] - CSI2_DPHY3: + * bit 0 ~ bit 7: HS Term Enable. + * defines the time that the DPHY + * wait before enabling the data + * lane termination after detecting + * that the sensor has driven the data + * lanes to the LP00 bridge state. + * The value is calculated by: + * (Max T(D_TERM_EN)/Period(DDR)) - 1 + * bit 8 ~ bit 15: HS_SETTLE + * Time interval during which the HS + * receiver shall ignore any Data Lane + * HS transistions. + * The vaule has been calibrated on + * different boards. It seems to work well. + * + * More detail please refer + * MIPI Alliance Spectification for D-PHY + * document for explanation of HS-SETTLE + * and D-TERM-EN. + */ + switch (pdata->dphy3_algo) { + case DPHY3_ALGO_PXA910: + /* + * Calculate CSI2_DPHY3 algo for PXA910 + */ + pdata->dphy[0] = + (((1 + (pdata->lane_clk * 80) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + case DPHY3_ALGO_PXA2128: + /* + * Calculate CSI2_DPHY3 algo for PXA2128 + */ + pdata->dphy[0] = + (((2 + (pdata->lane_clk * 110) / 1000) & 0xff) << 8) + | (1 + pdata->lane_clk * 35 / 1000); + break; + default: + /* + * Use default CSI2_DPHY3 value for PXA688/PXA988 + */ + dev_dbg(dev, "camera: use the default CSI2_DPHY3 value\n"); + } + + /* + * mipi_clk will never be changed, it is a fixed value on MMP + */ + if (IS_ERR(cam->mipi_clk)) + return; + + /* get the escape clk, this is hard coded */ + clk_prepare_enable(cam->mipi_clk); + tx_clk_esc = (clk_get_rate(cam->mipi_clk) / 1000000) / 12; + clk_disable_unprepare(cam->mipi_clk); + /* + * dphy[2] - CSI2_DPHY6: + * bit 0 ~ bit 7: CK Term Enable + * Time for the Clock Lane receiver to enable the HS line + * termination. The value is calculated similarly with + * HS Term Enable + * bit 8 ~ bit 15: CK Settle + * Time interval during which the HS receiver shall ignore + * any Clock Lane HS transitions. + * The value is calibrated on the boards. + */ + pdata->dphy[2] = + ((((534 * tx_clk_esc) / 2000 - 1) & 0xff) << 8) + | (((38 * tx_clk_esc) / 1000 - 1) & 0xff); + + dev_dbg(dev, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n", + pdata->dphy[0], pdata->dphy[1], pdata->dphy[2]); +} + +static irqreturn_t mmpcam_irq(int irq, void *data) +{ + struct mcam_camera *mcam = data; + unsigned int irqs, handled; + + spin_lock(&mcam->dev_lock); + irqs = mcam_reg_read(mcam, REG_IRQSTAT); + handled = mccic_irq(mcam, irqs); + spin_unlock(&mcam->dev_lock); + return IRQ_RETVAL(handled); +} + +static void mcam_init_clk(struct mcam_camera *mcam) +{ + unsigned int i; + + for (i = 0; i < NR_MCAM_CLK; i++) { + if (mcam_clks[i] != NULL) { + /* Some clks are not necessary on some boards + * We still try to run even it fails getting clk + */ + mcam->clk[i] = devm_clk_get(mcam->dev, mcam_clks[i]); + if (IS_ERR(mcam->clk[i])) + dev_warn(mcam->dev, "Could not get clk: %s\n", + mcam_clks[i]); + } + } +} + +static int mmpcam_probe(struct platform_device *pdev) +{ + struct mmp_camera *cam; + struct mcam_camera *mcam; + struct resource *res; + struct mmp_camera_platform_data *pdata; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENODEV; + + cam = devm_kzalloc(&pdev->dev, sizeof(*cam), GFP_KERNEL); + if (cam == NULL) + return -ENOMEM; + cam->pdev = pdev; + INIT_LIST_HEAD(&cam->devlist); + + mcam = &cam->mcam; + mcam->plat_power_up = mmpcam_power_up; + mcam->plat_power_down = mmpcam_power_down; + mcam->ctlr_reset = mcam_ctlr_reset; + mcam->calc_dphy = mmpcam_calc_dphy; + mcam->dev = &pdev->dev; + mcam->use_smbus = 0; + mcam->ccic_id = pdev->id; + mcam->mclk_min = pdata->mclk_min; + mcam->mclk_src = pdata->mclk_src; + mcam->mclk_div = pdata->mclk_div; + mcam->bus_type = pdata->bus_type; + mcam->dphy = pdata->dphy; + if (mcam->bus_type == V4L2_MBUS_CSI2) { + cam->mipi_clk = devm_clk_get(mcam->dev, "mipi"); + if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0)) + return PTR_ERR(cam->mipi_clk); + } + mcam->mipi_enabled = false; + mcam->lane = pdata->lane; + mcam->chip_id = MCAM_ARMADA610; + mcam->buffer_mode = B_DMA_sg; + strlcpy(mcam->bus_info, "platform:mmp-camera", sizeof(mcam->bus_info)); + spin_lock_init(&mcam->dev_lock); + /* + * Get our I/O memory. + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mcam->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(mcam->regs)) + return PTR_ERR(mcam->regs); + mcam->regs_size = resource_size(res); + /* + * Power/clock memory is elsewhere; get it too. Perhaps this + * should really be managed outside of this driver? + */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + cam->power_regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(cam->power_regs)) + return PTR_ERR(cam->power_regs); + /* + * Find the i2c adapter. This assumes, of course, that the + * i2c bus is already up and functioning. + */ + mcam->i2c_adapter = platform_get_drvdata(pdata->i2c_device); + if (mcam->i2c_adapter == NULL) { + dev_err(&pdev->dev, "No i2c adapter\n"); + return -ENODEV; + } + /* + * Sensor GPIO pins. + */ + ret = devm_gpio_request(&pdev->dev, pdata->sensor_power_gpio, + "cam-power"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor power gpio %d", + pdata->sensor_power_gpio); + return ret; + } + gpio_direction_output(pdata->sensor_power_gpio, 0); + ret = devm_gpio_request(&pdev->dev, pdata->sensor_reset_gpio, + "cam-reset"); + if (ret) { + dev_err(&pdev->dev, "Can't get sensor reset gpio %d", + pdata->sensor_reset_gpio); + return ret; + } + gpio_direction_output(pdata->sensor_reset_gpio, 0); + + mcam_init_clk(mcam); + + /* + * Power the device up and hand it off to the core. + */ + ret = mmpcam_power_up(mcam); + if (ret) + return ret; + ret = mccic_register(mcam); + if (ret) + goto out_power_down; + /* + * Finally, set up our IRQ now that the core is ready to + * deal with it. + */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + ret = -ENODEV; + goto out_unregister; + } + cam->irq = res->start; + ret = devm_request_irq(&pdev->dev, cam->irq, mmpcam_irq, IRQF_SHARED, + "mmp-camera", mcam); + if (ret == 0) { + mmpcam_add_device(cam); + return 0; + } + +out_unregister: + mccic_shutdown(mcam); +out_power_down: + mmpcam_power_down(mcam); + return ret; +} + + +static int mmpcam_remove(struct mmp_camera *cam) +{ + struct mcam_camera *mcam = &cam->mcam; + + mmpcam_remove_device(cam); + mccic_shutdown(mcam); + mmpcam_power_down(mcam); + return 0; +} + +static int mmpcam_platform_remove(struct platform_device *pdev) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + if (cam == NULL) + return -ENODEV; + return mmpcam_remove(cam); +} + +/* + * Suspend/resume support. + */ +#ifdef CONFIG_PM + +static int mmpcam_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + if (state.event != PM_EVENT_SUSPEND) + return 0; + mccic_suspend(&cam->mcam); + return 0; +} + +static int mmpcam_resume(struct platform_device *pdev) +{ + struct mmp_camera *cam = mmpcam_find_device(pdev); + + /* + * Power up unconditionally just in case the core tries to + * touch a register even if nothing was active before; trust + * me, it's better this way. + */ + mmpcam_power_up_ctlr(cam); + return mccic_resume(&cam->mcam); +} + +#endif + + +static struct platform_driver mmpcam_driver = { + .probe = mmpcam_probe, + .remove = mmpcam_platform_remove, +#ifdef CONFIG_PM + .suspend = mmpcam_suspend, + .resume = mmpcam_resume, +#endif + .driver = { + .name = "mmp-camera", + } +}; + + +static int __init mmpcam_init_module(void) +{ + mutex_init(&mmpcam_devices_lock); + return platform_driver_register(&mmpcam_driver); +} + +static void __exit mmpcam_exit_module(void) +{ + platform_driver_unregister(&mmpcam_driver); + /* + * platform_driver_unregister() should have emptied the list + */ + if (!list_empty(&mmpcam_devices)) + printk(KERN_ERR "mmp_camera leaving devices behind\n"); +} + +module_init(mmpcam_init_module); +module_exit(mmpcam_exit_module); -- cgit v1.2.3