From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 1356 ++++++++++++++++++++++++++ 1 file changed, 1356 insertions(+) create mode 100644 drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c new file mode 100644 index 000000000..b3e0d8bb5 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -0,0 +1,1356 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 1999 - 2018 Intel Corporation. */ + +#include "ixgbe.h" +#include +#include + +/* + * The 82599 and the X540 do not have true 64bit nanosecond scale + * counter registers. Instead, SYSTIME is defined by a fixed point + * system which allows the user to define the scale counter increment + * value at every level change of the oscillator driving the SYSTIME + * value. For both devices the TIMINCA:IV field defines this + * increment. On the X540 device, 31 bits are provided. However on the + * 82599 only provides 24 bits. The time unit is determined by the + * clock frequency of the oscillator in combination with the TIMINCA + * register. When these devices link at 10Gb the oscillator has a + * period of 6.4ns. In order to convert the scale counter into + * nanoseconds the cyclecounter and timecounter structures are + * used. The SYSTIME registers need to be converted to ns values by use + * of only a right shift (division by power of 2). The following math + * determines the largest incvalue that will fit into the available + * bits in the TIMINCA register. + * + * PeriodWidth: Number of bits to store the clock period + * MaxWidth: The maximum width value of the TIMINCA register + * Period: The clock period for the oscillator + * round(): discard the fractional portion of the calculation + * + * Period * [ 2 ^ ( MaxWidth - PeriodWidth ) ] + * + * For the X540, MaxWidth is 31 bits, and the base period is 6.4 ns + * For the 82599, MaxWidth is 24 bits, and the base period is 6.4 ns + * + * The period also changes based on the link speed: + * At 10Gb link or no link, the period remains the same. + * At 1Gb link, the period is multiplied by 10. (64ns) + * At 100Mb link, the period is multiplied by 100. (640ns) + * + * The calculated value allows us to right shift the SYSTIME register + * value in order to quickly convert it into a nanosecond clock, + * while allowing for the maximum possible adjustment value. + * + * These diagrams are only for the 10Gb link period + * + * SYSTIMEH SYSTIMEL + * +--------------+ +--------------+ + * X540 | 32 | | 1 | 3 | 28 | + * *--------------+ +--------------+ + * \________ 36 bits ______/ fract + * + * +--------------+ +--------------+ + * 82599 | 32 | | 8 | 3 | 21 | + * *--------------+ +--------------+ + * \________ 43 bits ______/ fract + * + * The 36 bit X540 SYSTIME overflows every + * 2^36 * 10^-9 / 60 = 1.14 minutes or 69 seconds + * + * The 43 bit 82599 SYSTIME overflows every + * 2^43 * 10^-9 / 3600 = 2.4 hours + */ +#define IXGBE_INCVAL_10GB 0x66666666 +#define IXGBE_INCVAL_1GB 0x40000000 +#define IXGBE_INCVAL_100 0x50000000 + +#define IXGBE_INCVAL_SHIFT_10GB 28 +#define IXGBE_INCVAL_SHIFT_1GB 24 +#define IXGBE_INCVAL_SHIFT_100 21 + +#define IXGBE_INCVAL_SHIFT_82599 7 +#define IXGBE_INCPER_SHIFT_82599 24 + +#define IXGBE_OVERFLOW_PERIOD (HZ * 30) +#define IXGBE_PTP_TX_TIMEOUT (HZ * 15) + +/* half of a one second clock period, for use with PPS signal. We have to use + * this instead of something pre-defined like IXGBE_PTP_PPS_HALF_SECOND, in + * order to force at least 64bits of precision for shifting + */ +#define IXGBE_PTP_PPS_HALF_SECOND 500000000ULL + +/* In contrast, the X550 controller has two registers, SYSTIMEH and SYSTIMEL + * which contain measurements of seconds and nanoseconds respectively. This + * matches the standard linux representation of time in the kernel. In addition, + * the X550 also has a SYSTIMER register which represents residue, or + * subnanosecond overflow adjustments. To control clock adjustment, the TIMINCA + * register is used, but it is unlike the X540 and 82599 devices. TIMINCA + * represents units of 2^-32 nanoseconds, and uses 31 bits for this, with the + * high bit representing whether the adjustent is positive or negative. Every + * clock cycle, the X550 will add 12.5 ns + TIMINCA which can result in a range + * of 12 to 13 nanoseconds adjustment. Unlike the 82599 and X540 devices, the + * X550's clock for purposes of SYSTIME generation is constant and not dependent + * on the link speed. + * + * SYSTIMEH SYSTIMEL SYSTIMER + * +--------------+ +--------------+ +-------------+ + * X550 | 32 | | 32 | | 32 | + * *--------------+ +--------------+ +-------------+ + * \____seconds___/ \_nanoseconds_/ \__2^-32 ns__/ + * + * This results in a full 96 bits to represent the clock, with 32 bits for + * seconds, 32 bits for nanoseconds (largest value is 0d999999999 or just under + * 1 second) and an additional 32 bits to measure sub nanosecond adjustments for + * underflow of adjustments. + * + * The 32 bits of seconds for the X550 overflows every + * 2^32 / ( 365.25 * 24 * 60 * 60 ) = ~136 years. + * + * In order to adjust the clock frequency for the X550, the TIMINCA register is + * provided. This register represents a + or minus nearly 0.5 ns adjustment to + * the base frequency. It is measured in 2^-32 ns units, with the high bit being + * the sign bit. This register enables software to calculate frequency + * adjustments and apply them directly to the clock rate. + * + * The math for converting ppb into TIMINCA values is fairly straightforward. + * TIMINCA value = ( Base_Frequency * ppb ) / 1000000000ULL + * + * This assumes that ppb is never high enough to create a value bigger than + * TIMINCA's 31 bits can store. This is ensured by the stack. Calculating this + * value is also simple. + * Max ppb = ( Max Adjustment / Base Frequency ) / 1000000000ULL + * + * For the X550, the Max adjustment is +/- 0.5 ns, and the base frequency is + * 12.5 nanoseconds. This means that the Max ppb is 39999999 + * Note: We subtract one in order to ensure no overflow, because the TIMINCA + * register can only hold slightly under 0.5 nanoseconds. + * + * Because TIMINCA is measured in 2^-32 ns units, we have to convert 12.5 ns + * into 2^-32 units, which is + * + * 12.5 * 2^32 = C80000000 + * + * Some revisions of hardware have a faster base frequency than the registers + * were defined for. To fix this, we use a timecounter structure with the + * proper mult and shift to convert the cycles into nanoseconds of time. + */ +#define IXGBE_X550_BASE_PERIOD 0xC80000000ULL +#define INCVALUE_MASK 0x7FFFFFFF +#define ISGN 0x80000000 +#define MAX_TIMADJ 0x7FFFFFFF + +/** + * ixgbe_ptp_setup_sdp_x540 + * @adapter: private adapter structure + * + * this function enables or disables the clock out feature on SDP0 for + * the X540 device. It will create a 1second periodic output that can + * be used as the PPS (via an interrupt). + * + * It calculates when the systime will be on an exact second, and then + * aligns the start of the PPS signal to that value. The shift is + * necessary because it can change based on the link speed. + */ +static void ixgbe_ptp_setup_sdp_x540(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int shift = adapter->hw_cc.shift; + u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem; + u64 ns = 0, clock_edge = 0; + + /* disable the pin first */ + IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0); + IXGBE_WRITE_FLUSH(hw); + + if (!(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED)) + return; + + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* enable the SDP0 pin as output, and connected to the + * native function for Timesync (ClockOut) + */ + esdp |= IXGBE_ESDP_SDP0_DIR | + IXGBE_ESDP_SDP0_NATIVE; + + /* enable the Clock Out feature on SDP0, and allow + * interrupts to occur when the pin changes + */ + tsauxc = IXGBE_TSAUXC_EN_CLK | + IXGBE_TSAUXC_SYNCLK | + IXGBE_TSAUXC_SDP0_INT; + + /* clock period (or pulse length) */ + clktiml = (u32)(IXGBE_PTP_PPS_HALF_SECOND << shift); + clktimh = (u32)((IXGBE_PTP_PPS_HALF_SECOND << shift) >> 32); + + /* Account for the cyclecounter wrap-around value by + * using the converted ns value of the current time to + * check for when the next aligned second would occur. + */ + clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML); + clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32; + ns = timecounter_cyc2time(&adapter->hw_tc, clock_edge); + + div_u64_rem(ns, IXGBE_PTP_PPS_HALF_SECOND, &rem); + clock_edge += ((IXGBE_PTP_PPS_HALF_SECOND - (u64)rem) << shift); + + /* specify the initial clock start time */ + trgttiml = (u32)clock_edge; + trgttimh = (u32)(clock_edge >> 32); + + IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml); + IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh); + IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml); + IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh); + + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc); + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_ptp_read_X550 - read cycle counter value + * @hw_cc: cyclecounter structure + * + * This function reads SYSTIME registers. It is called by the cyclecounter + * structure to convert from internal representation into nanoseconds. We need + * this for X550 since some skews do not have expected clock frequency and + * result of SYSTIME is 32bits of "billions of cycles" and 32 bits of + * "cycles", rather than seconds and nanoseconds. + */ +static u64 ixgbe_ptp_read_X550(const struct cyclecounter *hw_cc) +{ + struct ixgbe_adapter *adapter = + container_of(hw_cc, struct ixgbe_adapter, hw_cc); + struct ixgbe_hw *hw = &adapter->hw; + struct timespec64 ts; + + /* storage is 32 bits of 'billions of cycles' and 32 bits of 'cycles'. + * Some revisions of hardware run at a higher frequency and so the + * cycles are not guaranteed to be nanoseconds. The timespec64 created + * here is used for its math/conversions but does not necessarily + * represent nominal time. + * + * It should be noted that this cyclecounter will overflow at a + * non-bitmask field since we have to convert our billions of cycles + * into an actual cycles count. This results in some possible weird + * situations at high cycle counter stamps. However given that 32 bits + * of "seconds" is ~138 years this isn't a problem. Even at the + * increased frequency of some revisions, this is still ~103 years. + * Since the SYSTIME values start at 0 and we never write them, it is + * highly unlikely for the cyclecounter to overflow in practice. + */ + IXGBE_READ_REG(hw, IXGBE_SYSTIMR); + ts.tv_nsec = IXGBE_READ_REG(hw, IXGBE_SYSTIML); + ts.tv_sec = IXGBE_READ_REG(hw, IXGBE_SYSTIMH); + + return (u64)timespec64_to_ns(&ts); +} + +/** + * ixgbe_ptp_read_82599 - read raw cycle counter (to be used by time counter) + * @cc: the cyclecounter structure + * + * this function reads the cyclecounter registers and is called by the + * cyclecounter structure used to construct a ns counter from the + * arbitrary fixed point registers + */ +static u64 ixgbe_ptp_read_82599(const struct cyclecounter *cc) +{ + struct ixgbe_adapter *adapter = + container_of(cc, struct ixgbe_adapter, hw_cc); + struct ixgbe_hw *hw = &adapter->hw; + u64 stamp = 0; + + stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML); + stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32; + + return stamp; +} + +/** + * ixgbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp + * @adapter: private adapter structure + * @hwtstamp: stack timestamp structure + * @timestamp: unsigned 64bit system time value + * + * We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value + * which can be used by the stack's ptp functions. + * + * The lock is used to protect consistency of the cyclecounter and the SYSTIME + * registers. However, it does not need to protect against the Rx or Tx + * timestamp registers, as there can't be a new timestamp until the old one is + * unlatched by reading. + * + * In addition to the timestamp in hardware, some controllers need a software + * overflow cyclecounter, and this function takes this into account as well. + **/ +static void ixgbe_ptp_convert_to_hwtstamp(struct ixgbe_adapter *adapter, + struct skb_shared_hwtstamps *hwtstamp, + u64 timestamp) +{ + unsigned long flags; + struct timespec64 systime; + u64 ns; + + memset(hwtstamp, 0, sizeof(*hwtstamp)); + + switch (adapter->hw.mac.type) { + /* X550 and later hardware supposedly represent time using a seconds + * and nanoseconds counter, instead of raw 64bits nanoseconds. We need + * to convert the timestamp into cycles before it can be fed to the + * cyclecounter. We need an actual cyclecounter because some revisions + * of hardware run at a higher frequency and thus the counter does + * not represent seconds/nanoseconds. Instead it can be thought of as + * cycles and billions of cycles. + */ + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + case ixgbe_mac_x550em_a: + /* Upper 32 bits represent billions of cycles, lower 32 bits + * represent cycles. However, we use timespec64_to_ns for the + * correct math even though the units haven't been corrected + * yet. + */ + systime.tv_sec = timestamp >> 32; + systime.tv_nsec = timestamp & 0xFFFFFFFF; + + timestamp = timespec64_to_ns(&systime); + break; + default: + break; + } + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + ns = timecounter_cyc2time(&adapter->hw_tc, timestamp); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + hwtstamp->hwtstamp = ns_to_ktime(ns); +} + +/** + * ixgbe_ptp_adjfreq_82599 + * @ptp: the ptp clock structure + * @ppb: parts per billion adjustment from base + * + * adjust the frequency of the ptp cycle counter by the + * indicated ppb from the base frequency. + */ +static int ixgbe_ptp_adjfreq_82599(struct ptp_clock_info *ptp, s32 ppb) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + struct ixgbe_hw *hw = &adapter->hw; + u64 freq, incval; + u32 diff; + int neg_adj = 0; + + if (ppb < 0) { + neg_adj = 1; + ppb = -ppb; + } + + smp_mb(); + incval = READ_ONCE(adapter->base_incval); + + freq = incval; + freq *= ppb; + diff = div_u64(freq, 1000000000ULL); + + incval = neg_adj ? (incval - diff) : (incval + diff); + + switch (hw->mac.type) { + case ixgbe_mac_X540: + if (incval > 0xFFFFFFFFULL) + e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n"); + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, (u32)incval); + break; + case ixgbe_mac_82599EB: + if (incval > 0x00FFFFFFULL) + e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n"); + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, + BIT(IXGBE_INCPER_SHIFT_82599) | + ((u32)incval & 0x00FFFFFFUL)); + break; + default: + break; + } + + return 0; +} + +/** + * ixgbe_ptp_adjfreq_X550 + * @ptp: the ptp clock structure + * @ppb: parts per billion adjustment from base + * + * adjust the frequency of the SYSTIME registers by the indicated ppb from base + * frequency + */ +static int ixgbe_ptp_adjfreq_X550(struct ptp_clock_info *ptp, s32 ppb) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + struct ixgbe_hw *hw = &adapter->hw; + int neg_adj = 0; + u64 rate = IXGBE_X550_BASE_PERIOD; + u32 inca; + + if (ppb < 0) { + neg_adj = 1; + ppb = -ppb; + } + rate *= ppb; + rate = div_u64(rate, 1000000000ULL); + + /* warn if rate is too large */ + if (rate >= INCVALUE_MASK) + e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n"); + + inca = rate & INCVALUE_MASK; + if (neg_adj) + inca |= ISGN; + + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, inca); + + return 0; +} + +/** + * ixgbe_ptp_adjtime + * @ptp: the ptp clock structure + * @delta: offset to adjust the cycle counter by + * + * adjust the timer by resetting the timecounter structure. + */ +static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + unsigned long flags; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + timecounter_adjtime(&adapter->hw_tc, delta); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + if (adapter->ptp_setup_sdp) + adapter->ptp_setup_sdp(adapter); + + return 0; +} + +/** + * ixgbe_ptp_gettime + * @ptp: the ptp clock structure + * @ts: timespec structure to hold the current time value + * + * read the timecounter and return the correct value on ns, + * after converting it into a struct timespec. + */ +static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + unsigned long flags; + u64 ns; + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + ns = timecounter_read(&adapter->hw_tc); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + *ts = ns_to_timespec64(ns); + + return 0; +} + +/** + * ixgbe_ptp_settime + * @ptp: the ptp clock structure + * @ts: the timespec containing the new time for the cycle counter + * + * reset the timecounter to use a new base value instead of the kernel + * wall timer value. + */ +static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + unsigned long flags; + u64 ns = timespec64_to_ns(ts); + + /* reset the timecounter */ + spin_lock_irqsave(&adapter->tmreg_lock, flags); + timecounter_init(&adapter->hw_tc, &adapter->hw_cc, ns); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + if (adapter->ptp_setup_sdp) + adapter->ptp_setup_sdp(adapter); + return 0; +} + +/** + * ixgbe_ptp_feature_enable + * @ptp: the ptp clock structure + * @rq: the requested feature to change + * @on: whether to enable or disable the feature + * + * enable (or disable) ancillary features of the phc subsystem. + * our driver only supports the PPS feature on the X540 + */ +static int ixgbe_ptp_feature_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct ixgbe_adapter *adapter = + container_of(ptp, struct ixgbe_adapter, ptp_caps); + + /** + * When PPS is enabled, unmask the interrupt for the ClockOut + * feature, so that the interrupt handler can send the PPS + * event when the clock SDP triggers. Clear mask when PPS is + * disabled + */ + if (rq->type != PTP_CLK_REQ_PPS || !adapter->ptp_setup_sdp) + return -ENOTSUPP; + + if (on) + adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED; + else + adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED; + + adapter->ptp_setup_sdp(adapter); + return 0; +} + +/** + * ixgbe_ptp_check_pps_event + * @adapter: the private adapter structure + * + * This function is called by the interrupt routine when checking for + * interrupts. It will check and handle a pps event. + */ +void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ptp_clock_event event; + + event.type = PTP_CLOCK_PPS; + + /* this check is necessary in case the interrupt was enabled via some + * alternative means (ex. debug_fs). Better to check here than + * everywhere that calls this function. + */ + if (!adapter->ptp_clock) + return; + + switch (hw->mac.type) { + case ixgbe_mac_X540: + ptp_clock_event(adapter->ptp_clock, &event); + break; + default: + break; + } +} + +/** + * ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow + * @adapter: private adapter struct + * + * this watchdog task periodically reads the timecounter + * in order to prevent missing when the system time registers wrap + * around. This needs to be run approximately twice a minute. + */ +void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) +{ + bool timeout = time_is_before_jiffies(adapter->last_overflow_check + + IXGBE_OVERFLOW_PERIOD); + struct timespec64 ts; + + if (timeout) { + ixgbe_ptp_gettime(&adapter->ptp_caps, &ts); + adapter->last_overflow_check = jiffies; + } +} + +/** + * ixgbe_ptp_rx_hang - detect error case when Rx timestamp registers latched + * @adapter: private network adapter structure + * + * this watchdog task is scheduled to detect error case where hardware has + * dropped an Rx packet that was timestamped when the ring is full. The + * particular error is rare but leaves the device in a state unable to timestamp + * any future packets. + */ +void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + struct ixgbe_ring *rx_ring; + unsigned long rx_event; + int n; + + /* if we don't have a valid timestamp in the registers, just update the + * timeout counter and exit + */ + if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) { + adapter->last_rx_ptp_check = jiffies; + return; + } + + /* determine the most recent watchdog or rx_timestamp event */ + rx_event = adapter->last_rx_ptp_check; + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + if (time_after(rx_ring->last_rx_timestamp, rx_event)) + rx_event = rx_ring->last_rx_timestamp; + } + + /* only need to read the high RXSTMP register to clear the lock */ + if (time_is_before_jiffies(rx_event + 5 * HZ)) { + IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + adapter->last_rx_ptp_check = jiffies; + + adapter->rx_hwtstamp_cleared++; + e_warn(drv, "clearing RX Timestamp hang\n"); + } +} + +/** + * ixgbe_ptp_clear_tx_timestamp - utility function to clear Tx timestamp state + * @adapter: the private adapter structure + * + * This function should be called whenever the state related to a Tx timestamp + * needs to be cleared. This helps ensure that all related bits are reset for + * the next Tx timestamp event. + */ +static void ixgbe_ptp_clear_tx_timestamp(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + + IXGBE_READ_REG(hw, IXGBE_TXSTMPH); + if (adapter->ptp_tx_skb) { + dev_kfree_skb_any(adapter->ptp_tx_skb); + adapter->ptp_tx_skb = NULL; + } + clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state); +} + +/** + * ixgbe_ptp_tx_hang - detect error case where Tx timestamp never finishes + * @adapter: private network adapter structure + */ +void ixgbe_ptp_tx_hang(struct ixgbe_adapter *adapter) +{ + bool timeout = time_is_before_jiffies(adapter->ptp_tx_start + + IXGBE_PTP_TX_TIMEOUT); + + if (!adapter->ptp_tx_skb) + return; + + if (!test_bit(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state)) + return; + + /* If we haven't received a timestamp within the timeout, it is + * reasonable to assume that it will never occur, so we can unlock the + * timestamp bit when this occurs. + */ + if (timeout) { + cancel_work_sync(&adapter->ptp_tx_work); + ixgbe_ptp_clear_tx_timestamp(adapter); + adapter->tx_hwtstamp_timeouts++; + e_warn(drv, "clearing Tx timestamp hang\n"); + } +} + +/** + * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp + * @adapter: the private adapter struct + * + * if the timestamp is valid, we convert it into the timecounter ns + * value, then store that result into the shhwtstamps structure which + * is passed up the network stack + */ +static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter) +{ + struct sk_buff *skb = adapter->ptp_tx_skb; + struct ixgbe_hw *hw = &adapter->hw; + struct skb_shared_hwtstamps shhwtstamps; + u64 regval = 0; + + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32; + ixgbe_ptp_convert_to_hwtstamp(adapter, &shhwtstamps, regval); + + /* Handle cleanup of the ptp_tx_skb ourselves, and unlock the state + * bit prior to notifying the stack via skb_tstamp_tx(). This prevents + * well behaved applications from attempting to timestamp again prior + * to the lock bit being clear. + */ + adapter->ptp_tx_skb = NULL; + clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state); + + /* Notify the stack and then free the skb after we've unlocked */ + skb_tstamp_tx(skb, &shhwtstamps); + dev_kfree_skb_any(skb); +} + +/** + * ixgbe_ptp_tx_hwtstamp_work + * @work: pointer to the work struct + * + * This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware + * timestamp has been taken for the current skb. It is necessary, because the + * descriptor's "done" bit does not correlate with the timestamp event. + */ +static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter, + ptp_tx_work); + struct ixgbe_hw *hw = &adapter->hw; + bool timeout = time_is_before_jiffies(adapter->ptp_tx_start + + IXGBE_PTP_TX_TIMEOUT); + u32 tsynctxctl; + + /* we have to have a valid skb to poll for a timestamp */ + if (!adapter->ptp_tx_skb) { + ixgbe_ptp_clear_tx_timestamp(adapter); + return; + } + + /* stop polling once we have a valid timestamp */ + tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID) { + ixgbe_ptp_tx_hwtstamp(adapter); + return; + } + + if (timeout) { + ixgbe_ptp_clear_tx_timestamp(adapter); + adapter->tx_hwtstamp_timeouts++; + e_warn(drv, "clearing Tx Timestamp hang\n"); + } else { + /* reschedule to keep checking if it's not available yet */ + schedule_work(&adapter->ptp_tx_work); + } +} + +/** + * ixgbe_ptp_rx_pktstamp - utility function to get RX time stamp from buffer + * @q_vector: structure containing interrupt and ring information + * @skb: the packet + * + * This function will be called by the Rx routine of the timestamp for this + * packet is stored in the buffer. The value is stored in little endian format + * starting at the end of the packet data. + */ +void ixgbe_ptp_rx_pktstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) +{ + __le64 regval; + + /* copy the bits out of the skb, and then trim the skb length */ + skb_copy_bits(skb, skb->len - IXGBE_TS_HDR_LEN, ®val, + IXGBE_TS_HDR_LEN); + __pskb_trim(skb, skb->len - IXGBE_TS_HDR_LEN); + + /* The timestamp is recorded in little endian format, and is stored at + * the end of the packet. + * + * DWORD: N N + 1 N + 2 + * Field: End of Packet SYSTIMH SYSTIML + */ + ixgbe_ptp_convert_to_hwtstamp(q_vector->adapter, skb_hwtstamps(skb), + le64_to_cpu(regval)); +} + +/** + * ixgbe_ptp_rx_rgtstamp - utility function which checks for RX time stamp + * @q_vector: structure containing interrupt and ring information + * @skb: particular skb to send timestamp with + * + * if the timestamp is valid, we convert it into the timecounter ns + * value, then store that result into the shhwtstamps structure which + * is passed up the network stack + */ +void ixgbe_ptp_rx_rgtstamp(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb) +{ + struct ixgbe_adapter *adapter; + struct ixgbe_hw *hw; + u64 regval = 0; + u32 tsyncrxctl; + + /* we cannot process timestamps on a ring without a q_vector */ + if (!q_vector || !q_vector->adapter) + return; + + adapter = q_vector->adapter; + hw = &adapter->hw; + + /* Read the tsyncrxctl register afterwards in order to prevent taking an + * I/O hit on every packet. + */ + + tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) + return; + + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); + regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; + + ixgbe_ptp_convert_to_hwtstamp(adapter, skb_hwtstamps(skb), regval); +} + +int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) +{ + struct hwtstamp_config *config = &adapter->tstamp_config; + + return copy_to_user(ifr->ifr_data, config, + sizeof(*config)) ? -EFAULT : 0; +} + +/** + * ixgbe_ptp_set_timestamp_mode - setup the hardware for the requested mode + * @adapter: the private ixgbe adapter structure + * @config: the hwtstamp configuration requested + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware + * filters. Not all combinations are supported, in particular event + * type has to be specified. Matching the kind of event packet is + * not supported, with the exception of "all V2 events regardless of + * level 2 or 4". + * + * Since hardware always timestamps Path delay packets when timestamping V2 + * packets, regardless of the type specified in the register, only use V2 + * Event mode. This more accurately tells the user what the hardware is going + * to do anyways. + * + * Note: this may modify the hwtstamp configuration towards a more general + * mode, if required to support the specifically requested mode. + */ +static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter, + struct hwtstamp_config *config) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 tsync_tx_ctl = IXGBE_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED; + u32 tsync_rx_mtrl = PTP_EV_PORT << 16; + bool is_l2 = false; + u32 regval; + + /* reserved for future extensions */ + if (config->flags) + return -EINVAL; + + switch (config->tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl = 0; + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config->rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl = 0; + tsync_rx_mtrl = 0; + adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG; + adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG; + adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; + is_l2 = true; + config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_NTP_ALL: + case HWTSTAMP_FILTER_ALL: + /* The X550 controller is capable of timestamping all packets, + * which allows it to accept any filter. + */ + if (hw->mac.type >= ixgbe_mac_X550) { + tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_ALL; + config->rx_filter = HWTSTAMP_FILTER_ALL; + adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED; + break; + } + /* fall through */ + default: + /* + * register RXMTRL must be set in order to do V1 packets, + * therefore it is not possible to time stamp both V1 Sync and + * Delay_Req messages and hardware does not support + * timestamping all packets => return error + */ + adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + config->rx_filter = HWTSTAMP_FILTER_NONE; + return -ERANGE; + } + + if (hw->mac.type == ixgbe_mac_82598EB) { + adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED | + IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER); + if (tsync_rx_ctl | tsync_tx_ctl) + return -ERANGE; + return 0; + } + + /* Per-packet timestamping only works if the filter is set to all + * packets. Since this is desired, always timestamp all packets as long + * as any Rx filter was configured. + */ + switch (hw->mac.type) { + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + case ixgbe_mac_x550em_a: + /* enable timestamping all packets only if at least some + * packets were requested. Otherwise, play nice and disable + * timestamping + */ + if (config->rx_filter == HWTSTAMP_FILTER_NONE) + break; + + tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED | + IXGBE_TSYNCRXCTL_TYPE_ALL | + IXGBE_TSYNCRXCTL_TSIP_UT_EN; + config->rx_filter = HWTSTAMP_FILTER_ALL; + adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED; + adapter->flags &= ~IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER; + is_l2 = true; + break; + default: + break; + } + + /* define ethertype filter for timestamping L2 packets */ + if (is_l2) + IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), + (IXGBE_ETQF_FILTER_EN | /* enable filter */ + IXGBE_ETQF_1588 | /* enable timestamping */ + ETH_P_1588)); /* 1588 eth protocol type */ + else + IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), 0); + + /* enable/disable TX */ + regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL); + regval &= ~IXGBE_TSYNCTXCTL_ENABLED; + regval |= tsync_tx_ctl; + IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval); + + /* enable/disable RX */ + regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + regval &= ~(IXGBE_TSYNCRXCTL_ENABLED | IXGBE_TSYNCRXCTL_TYPE_MASK); + regval |= tsync_rx_ctl; + IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval); + + /* define which PTP packets are time stamped */ + IXGBE_WRITE_REG(hw, IXGBE_RXMTRL, tsync_rx_mtrl); + + IXGBE_WRITE_FLUSH(hw); + + /* clear TX/RX time stamp registers, just to be sure */ + ixgbe_ptp_clear_tx_timestamp(adapter); + IXGBE_READ_REG(hw, IXGBE_RXSTMPH); + + return 0; +} + +/** + * ixgbe_ptp_set_ts_config - user entry point for timestamp mode + * @adapter: pointer to adapter struct + * @ifr: ioctl data + * + * Set hardware to requested mode. If unsupported, return an error with no + * changes. Otherwise, store the mode for future reference. + */ +int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr) +{ + struct hwtstamp_config config; + int err; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + err = ixgbe_ptp_set_timestamp_mode(adapter, &config); + if (err) + return err; + + /* save these settings for future reference */ + memcpy(&adapter->tstamp_config, &config, + sizeof(adapter->tstamp_config)); + + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +static void ixgbe_ptp_link_speed_adjust(struct ixgbe_adapter *adapter, + u32 *shift, u32 *incval) +{ + /** + * Scale the NIC cycle counter by a large factor so that + * relatively small corrections to the frequency can be added + * or subtracted. The drawbacks of a large factor include + * (a) the clock register overflows more quickly, (b) the cycle + * counter structure must be able to convert the systime value + * to nanoseconds using only a multiplier and a right-shift, + * and (c) the value must fit within the timinca register space + * => math based on internal DMA clock rate and available bits + * + * Note that when there is no link, internal DMA clock is same as when + * link speed is 10Gb. Set the registers correctly even when link is + * down to preserve the clock setting + */ + switch (adapter->link_speed) { + case IXGBE_LINK_SPEED_100_FULL: + *shift = IXGBE_INCVAL_SHIFT_100; + *incval = IXGBE_INCVAL_100; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + *shift = IXGBE_INCVAL_SHIFT_1GB; + *incval = IXGBE_INCVAL_1GB; + break; + case IXGBE_LINK_SPEED_10GB_FULL: + default: + *shift = IXGBE_INCVAL_SHIFT_10GB; + *incval = IXGBE_INCVAL_10GB; + break; + } +} + +/** + * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw + * @adapter: pointer to the adapter structure + * + * This function should be called to set the proper values for the TIMINCA + * register and tell the cyclecounter structure what the tick rate of SYSTIME + * is. It does not directly modify SYSTIME registers or the timecounter + * structure. It should be called whenever a new TIMINCA value is necessary, + * such as during initialization or when the link speed changes. + */ +void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct cyclecounter cc; + unsigned long flags; + u32 incval = 0; + u32 tsauxc = 0; + u32 fuse0 = 0; + + /* For some of the boards below this mask is technically incorrect. + * The timestamp mask overflows at approximately 61bits. However the + * particular hardware does not overflow on an even bitmask value. + * Instead, it overflows due to conversion of upper 32bits billions of + * cycles. Timecounters are not really intended for this purpose so + * they do not properly function if the overflow point isn't 2^N-1. + * However, the actual SYSTIME values in question take ~138 years to + * overflow. In practice this means they won't actually overflow. A + * proper fix to this problem would require modification of the + * timecounter delta calculations. + */ + cc.mask = CLOCKSOURCE_MASK(64); + cc.mult = 1; + cc.shift = 0; + + switch (hw->mac.type) { + case ixgbe_mac_X550EM_x: + /* SYSTIME assumes X550EM_x board frequency is 300Mhz, and is + * designed to represent seconds and nanoseconds when this is + * the case. However, some revisions of hardware have a 400Mhz + * clock and we have to compensate for this frequency + * variation using corrected mult and shift values. + */ + fuse0 = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)); + if (!(fuse0 & IXGBE_FUSES0_300MHZ)) { + cc.mult = 3; + cc.shift = 2; + } + /* fallthrough */ + case ixgbe_mac_x550em_a: + case ixgbe_mac_X550: + cc.read = ixgbe_ptp_read_X550; + + /* enable SYSTIME counter */ + IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0); + IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0); + IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0); + tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC); + IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, + tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME); + IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS); + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC); + + IXGBE_WRITE_FLUSH(hw); + break; + case ixgbe_mac_X540: + cc.read = ixgbe_ptp_read_82599; + + ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval); + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval); + break; + case ixgbe_mac_82599EB: + cc.read = ixgbe_ptp_read_82599; + + ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval); + incval >>= IXGBE_INCVAL_SHIFT_82599; + cc.shift -= IXGBE_INCVAL_SHIFT_82599; + IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, + BIT(IXGBE_INCPER_SHIFT_82599) | incval); + break; + default: + /* other devices aren't supported */ + return; + } + + /* update the base incval used to calculate frequency adjustment */ + WRITE_ONCE(adapter->base_incval, incval); + smp_mb(); + + /* need lock to prevent incorrect read while modifying cyclecounter */ + spin_lock_irqsave(&adapter->tmreg_lock, flags); + memcpy(&adapter->hw_cc, &cc, sizeof(adapter->hw_cc)); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); +} + +/** + * ixgbe_ptp_reset + * @adapter: the ixgbe private board structure + * + * When the MAC resets, all the hardware bits for timesync are reset. This + * function is used to re-enable the device for PTP based on current settings. + * We do lose the current clock time, so just reset the cyclecounter to the + * system real clock time. + * + * This function will maintain hwtstamp_config settings, and resets the SDP + * output if it was enabled. + */ +void ixgbe_ptp_reset(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + unsigned long flags; + + /* reset the hardware timestamping mode */ + ixgbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config); + + /* 82598 does not support PTP */ + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + ixgbe_ptp_start_cyclecounter(adapter); + + spin_lock_irqsave(&adapter->tmreg_lock, flags); + timecounter_init(&adapter->hw_tc, &adapter->hw_cc, + ktime_to_ns(ktime_get_real())); + spin_unlock_irqrestore(&adapter->tmreg_lock, flags); + + adapter->last_overflow_check = jiffies; + + /* Now that the shift has been calculated and the systime + * registers reset, (re-)enable the Clock out feature + */ + if (adapter->ptp_setup_sdp) + adapter->ptp_setup_sdp(adapter); +} + +/** + * ixgbe_ptp_create_clock + * @adapter: the ixgbe private adapter structure + * + * This function performs setup of the user entry point function table and + * initializes the PTP clock device, which is used to access the clock-like + * features of the PTP core. It will be called by ixgbe_ptp_init, and may + * reuse a previously initialized clock (such as during a suspend/resume + * cycle). + */ +static long ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + long err; + + /* do nothing if we already have a clock device */ + if (!IS_ERR_OR_NULL(adapter->ptp_clock)) + return 0; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_X540: + snprintf(adapter->ptp_caps.name, + sizeof(adapter->ptp_caps.name), + "%s", netdev->name); + adapter->ptp_caps.owner = THIS_MODULE; + adapter->ptp_caps.max_adj = 250000000; + adapter->ptp_caps.n_alarm = 0; + adapter->ptp_caps.n_ext_ts = 0; + adapter->ptp_caps.n_per_out = 0; + adapter->ptp_caps.pps = 1; + adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599; + adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; + adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime; + adapter->ptp_caps.settime64 = ixgbe_ptp_settime; + adapter->ptp_caps.enable = ixgbe_ptp_feature_enable; + adapter->ptp_setup_sdp = ixgbe_ptp_setup_sdp_x540; + break; + case ixgbe_mac_82599EB: + snprintf(adapter->ptp_caps.name, + sizeof(adapter->ptp_caps.name), + "%s", netdev->name); + adapter->ptp_caps.owner = THIS_MODULE; + adapter->ptp_caps.max_adj = 250000000; + adapter->ptp_caps.n_alarm = 0; + adapter->ptp_caps.n_ext_ts = 0; + adapter->ptp_caps.n_per_out = 0; + adapter->ptp_caps.pps = 0; + adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599; + adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; + adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime; + adapter->ptp_caps.settime64 = ixgbe_ptp_settime; + adapter->ptp_caps.enable = ixgbe_ptp_feature_enable; + break; + case ixgbe_mac_X550: + case ixgbe_mac_X550EM_x: + case ixgbe_mac_x550em_a: + snprintf(adapter->ptp_caps.name, 16, "%s", netdev->name); + adapter->ptp_caps.owner = THIS_MODULE; + adapter->ptp_caps.max_adj = 30000000; + adapter->ptp_caps.n_alarm = 0; + adapter->ptp_caps.n_ext_ts = 0; + adapter->ptp_caps.n_per_out = 0; + adapter->ptp_caps.pps = 0; + adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_X550; + adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime; + adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime; + adapter->ptp_caps.settime64 = ixgbe_ptp_settime; + adapter->ptp_caps.enable = ixgbe_ptp_feature_enable; + adapter->ptp_setup_sdp = NULL; + break; + default: + adapter->ptp_clock = NULL; + adapter->ptp_setup_sdp = NULL; + return -EOPNOTSUPP; + } + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps, + &adapter->pdev->dev); + if (IS_ERR(adapter->ptp_clock)) { + err = PTR_ERR(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_dev_err("ptp_clock_register failed\n"); + return err; + } else if (adapter->ptp_clock) + e_dev_info("registered PHC device on %s\n", netdev->name); + + /* set default timestamp mode to disabled here. We do this in + * create_clock instead of init, because we don't want to override the + * previous settings during a resume cycle. + */ + adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; + adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF; + + return 0; +} + +/** + * ixgbe_ptp_init + * @adapter: the ixgbe private adapter structure + * + * This function performs the required steps for enabling PTP + * support. If PTP support has already been loaded it simply calls the + * cyclecounter init routine and exits. + */ +void ixgbe_ptp_init(struct ixgbe_adapter *adapter) +{ + /* initialize the spin lock first since we can't control when a user + * will call the entry functions once we have initialized the clock + * device + */ + spin_lock_init(&adapter->tmreg_lock); + + /* obtain a PTP device, or re-use an existing device */ + if (ixgbe_ptp_create_clock(adapter)) + return; + + /* we have a clock so we can initialize work now */ + INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work); + + /* reset the PTP related hardware bits */ + ixgbe_ptp_reset(adapter); + + /* enter the IXGBE_PTP_RUNNING state */ + set_bit(__IXGBE_PTP_RUNNING, &adapter->state); + + return; +} + +/** + * ixgbe_ptp_suspend - stop PTP work items + * @adapter: pointer to adapter struct + * + * this function suspends PTP activity, and prevents more PTP work from being + * generated, but does not destroy the PTP clock device. + */ +void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter) +{ + /* Leave the IXGBE_PTP_RUNNING state. */ + if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED; + if (adapter->ptp_setup_sdp) + adapter->ptp_setup_sdp(adapter); + + /* ensure that we cancel any pending PTP Tx work item in progress */ + cancel_work_sync(&adapter->ptp_tx_work); + ixgbe_ptp_clear_tx_timestamp(adapter); +} + +/** + * ixgbe_ptp_stop - close the PTP device + * @adapter: pointer to adapter struct + * + * completely destroy the PTP device, should only be called when the device is + * being fully closed. + */ +void ixgbe_ptp_stop(struct ixgbe_adapter *adapter) +{ + /* first, suspend PTP activity */ + ixgbe_ptp_suspend(adapter); + + /* disable the PTP clock device */ + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + adapter->ptp_clock = NULL; + e_dev_info("removed PHC on %s\n", + adapter->netdev->name); + } +} -- cgit v1.2.3