From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 292 +++++++++++++++++++++ 1 file changed, 292 insertions(+) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c (limited to 'drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c new file mode 100644 index 000000000..aacc4aa80 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -0,0 +1,292 @@ +/******************************************************************************* + This is the driver for the GMAC on-chip Ethernet controller for ST SoCs. + DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for + developing this code. + + This contains the functions to handle the dma. + + Copyright (C) 2007-2009 STMicroelectronics Ltd + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Author: Giuseppe Cavallaro +*******************************************************************************/ + +#include +#include "dwmac1000.h" +#include "dwmac_dma.h" + +static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) +{ + u32 value = readl(ioaddr + DMA_AXI_BUS_MODE); + int i; + + pr_info("dwmac1000: Master AXI performs %s burst length\n", + !(value & DMA_AXI_UNDEF) ? "fixed" : "any"); + + if (axi->axi_lpi_en) + value |= DMA_AXI_EN_LPI; + if (axi->axi_xit_frm) + value |= DMA_AXI_LPI_XIT_FRM; + + value &= ~DMA_AXI_WR_OSR_LMT; + value |= (axi->axi_wr_osr_lmt & DMA_AXI_WR_OSR_LMT_MASK) << + DMA_AXI_WR_OSR_LMT_SHIFT; + + value &= ~DMA_AXI_RD_OSR_LMT; + value |= (axi->axi_rd_osr_lmt & DMA_AXI_RD_OSR_LMT_MASK) << + DMA_AXI_RD_OSR_LMT_SHIFT; + + /* Depending on the UNDEF bit the Master AXI will perform any burst + * length according to the BLEN programmed (by default all BLEN are + * set). + */ + for (i = 0; i < AXI_BLEN; i++) { + switch (axi->axi_blen[i]) { + case 256: + value |= DMA_AXI_BLEN256; + break; + case 128: + value |= DMA_AXI_BLEN128; + break; + case 64: + value |= DMA_AXI_BLEN64; + break; + case 32: + value |= DMA_AXI_BLEN32; + break; + case 16: + value |= DMA_AXI_BLEN16; + break; + case 8: + value |= DMA_AXI_BLEN8; + break; + case 4: + value |= DMA_AXI_BLEN4; + break; + } + } + + writel(value, ioaddr + DMA_AXI_BUS_MODE); +} + +static void dwmac1000_dma_init(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, int atds) +{ + u32 value = readl(ioaddr + DMA_BUS_MODE); + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; + + /* + * Set the DMA PBL (Programmable Burst Length) mode. + * + * Note: before stmmac core 3.50 this mode bit was 4xPBL, and + * post 3.5 mode bit acts as 8*PBL. + */ + if (dma_cfg->pblx8) + value |= DMA_BUS_MODE_MAXPBL; + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); + + /* Set the Fixed burst mode */ + if (dma_cfg->fixed_burst) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (dma_cfg->mixed_burst) + value |= DMA_BUS_MODE_MB; + + if (atds) + value |= DMA_BUS_MODE_ATDS; + + if (dma_cfg->aal) + value |= DMA_BUS_MODE_AAL; + + writel(value, ioaddr + DMA_BUS_MODE); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA); +} + +static void dwmac1000_dma_init_rx(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_rx_phy, u32 chan) +{ + /* RX descriptor base address list must be written into DMA CSR3 */ + writel(dma_rx_phy, ioaddr + DMA_RCV_BASE_ADDR); +} + +static void dwmac1000_dma_init_tx(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_tx_phy, u32 chan) +{ + /* TX descriptor base address list must be written into DMA CSR4 */ + writel(dma_tx_phy, ioaddr + DMA_TX_BASE_ADDR); +} + +static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz) +{ + csr6 &= ~DMA_CONTROL_RFA_MASK; + csr6 &= ~DMA_CONTROL_RFD_MASK; + + /* Leave flow control disabled if receive fifo size is less than + * 4K or 0. Otherwise, send XOFF when fifo is 1K less than full, + * and send XON when 2K less than full. + */ + if (rxfifosz < 4096) { + csr6 &= ~DMA_CONTROL_EFC; + pr_debug("GMAC: disabling flow control, rxfifo too small(%d)\n", + rxfifosz); + } else { + csr6 |= DMA_CONTROL_EFC; + csr6 |= RFA_FULL_MINUS_1K; + csr6 |= RFD_FULL_MINUS_2K; + } + return csr6; +} + +static void dwmac1000_dma_operation_mode_rx(void __iomem *ioaddr, int mode, + u32 channel, int fifosz, u8 qmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (mode == SF_DMA_MODE) { + pr_debug("GMAC: enable RX store and forward mode\n"); + csr6 |= DMA_CONTROL_RSF; + } else { + pr_debug("GMAC: disable RX SF mode (threshold %d)\n", mode); + csr6 &= ~DMA_CONTROL_RSF; + csr6 &= DMA_CONTROL_TC_RX_MASK; + if (mode <= 32) + csr6 |= DMA_CONTROL_RTC_32; + else if (mode <= 64) + csr6 |= DMA_CONTROL_RTC_64; + else if (mode <= 96) + csr6 |= DMA_CONTROL_RTC_96; + else + csr6 |= DMA_CONTROL_RTC_128; + } + + /* Configure flow control based on rx fifo size */ + csr6 = dwmac1000_configure_fc(csr6, fifosz); + + writel(csr6, ioaddr + DMA_CONTROL); +} + +static void dwmac1000_dma_operation_mode_tx(void __iomem *ioaddr, int mode, + u32 channel, int fifosz, u8 qmode) +{ + u32 csr6 = readl(ioaddr + DMA_CONTROL); + + if (mode == SF_DMA_MODE) { + pr_debug("GMAC: enable TX store and forward mode\n"); + /* Transmit COE type 2 cannot be done in cut-through mode. */ + csr6 |= DMA_CONTROL_TSF; + /* Operating on second frame increase the performance + * especially when transmit store-and-forward is used. + */ + csr6 |= DMA_CONTROL_OSF; + } else { + pr_debug("GMAC: disabling TX SF (threshold %d)\n", mode); + csr6 &= ~DMA_CONTROL_TSF; + csr6 &= DMA_CONTROL_TC_TX_MASK; + /* Set the transmit threshold */ + if (mode <= 32) + csr6 |= DMA_CONTROL_TTC_32; + else if (mode <= 64) + csr6 |= DMA_CONTROL_TTC_64; + else if (mode <= 128) + csr6 |= DMA_CONTROL_TTC_128; + else if (mode <= 192) + csr6 |= DMA_CONTROL_TTC_192; + else + csr6 |= DMA_CONTROL_TTC_256; + } + + writel(csr6, ioaddr + DMA_CONTROL); +} + +static void dwmac1000_dump_dma_regs(void __iomem *ioaddr, u32 *reg_space) +{ + int i; + + for (i = 0; i < NUM_DWMAC1000_DMA_REGS; i++) + if ((i < 12) || (i > 17)) + reg_space[DMA_BUS_MODE / 4 + i] = + readl(ioaddr + DMA_BUS_MODE + i * 4); +} + +static void dwmac1000_get_hw_feature(void __iomem *ioaddr, + struct dma_features *dma_cap) +{ + u32 hw_cap = readl(ioaddr + DMA_HW_FEATURE); + + dma_cap->mbps_10_100 = (hw_cap & DMA_HW_FEAT_MIISEL); + dma_cap->mbps_1000 = (hw_cap & DMA_HW_FEAT_GMIISEL) >> 1; + dma_cap->half_duplex = (hw_cap & DMA_HW_FEAT_HDSEL) >> 2; + dma_cap->hash_filter = (hw_cap & DMA_HW_FEAT_HASHSEL) >> 4; + dma_cap->multi_addr = (hw_cap & DMA_HW_FEAT_ADDMAC) >> 5; + dma_cap->pcs = (hw_cap & DMA_HW_FEAT_PCSSEL) >> 6; + dma_cap->sma_mdio = (hw_cap & DMA_HW_FEAT_SMASEL) >> 8; + dma_cap->pmt_remote_wake_up = (hw_cap & DMA_HW_FEAT_RWKSEL) >> 9; + dma_cap->pmt_magic_frame = (hw_cap & DMA_HW_FEAT_MGKSEL) >> 10; + /* MMC */ + dma_cap->rmon = (hw_cap & DMA_HW_FEAT_MMCSEL) >> 11; + /* IEEE 1588-2002 */ + dma_cap->time_stamp = + (hw_cap & DMA_HW_FEAT_TSVER1SEL) >> 12; + /* IEEE 1588-2008 */ + dma_cap->atime_stamp = (hw_cap & DMA_HW_FEAT_TSVER2SEL) >> 13; + /* 802.3az - Energy-Efficient Ethernet (EEE) */ + dma_cap->eee = (hw_cap & DMA_HW_FEAT_EEESEL) >> 14; + dma_cap->av = (hw_cap & DMA_HW_FEAT_AVSEL) >> 15; + /* TX and RX csum */ + dma_cap->tx_coe = (hw_cap & DMA_HW_FEAT_TXCOESEL) >> 16; + dma_cap->rx_coe_type1 = (hw_cap & DMA_HW_FEAT_RXTYP1COE) >> 17; + dma_cap->rx_coe_type2 = (hw_cap & DMA_HW_FEAT_RXTYP2COE) >> 18; + dma_cap->rxfifo_over_2048 = (hw_cap & DMA_HW_FEAT_RXFIFOSIZE) >> 19; + /* TX and RX number of channels */ + dma_cap->number_rx_channel = (hw_cap & DMA_HW_FEAT_RXCHCNT) >> 20; + dma_cap->number_tx_channel = (hw_cap & DMA_HW_FEAT_TXCHCNT) >> 22; + /* Alternate (enhanced) DESC mode */ + dma_cap->enh_desc = (hw_cap & DMA_HW_FEAT_ENHDESSEL) >> 24; +} + +static void dwmac1000_rx_watchdog(void __iomem *ioaddr, u32 riwt, + u32 number_chan) +{ + writel(riwt, ioaddr + DMA_RX_WATCHDOG); +} + +const struct stmmac_dma_ops dwmac1000_dma_ops = { + .reset = dwmac_dma_reset, + .init = dwmac1000_dma_init, + .init_rx_chan = dwmac1000_dma_init_rx, + .init_tx_chan = dwmac1000_dma_init_tx, + .axi = dwmac1000_dma_axi, + .dump_regs = dwmac1000_dump_dma_regs, + .dma_rx_mode = dwmac1000_dma_operation_mode_rx, + .dma_tx_mode = dwmac1000_dma_operation_mode_tx, + .enable_dma_transmission = dwmac_enable_dma_transmission, + .enable_dma_irq = dwmac_enable_dma_irq, + .disable_dma_irq = dwmac_disable_dma_irq, + .start_tx = dwmac_dma_start_tx, + .stop_tx = dwmac_dma_stop_tx, + .start_rx = dwmac_dma_start_rx, + .stop_rx = dwmac_dma_stop_rx, + .dma_interrupt = dwmac_dma_interrupt, + .get_hw_feature = dwmac1000_get_hw_feature, + .rx_watchdog = dwmac1000_rx_watchdog, +}; -- cgit v1.2.3