From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 238 ++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c (limited to 'drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c new file mode 100644 index 000000000..757a3b37a --- /dev/null +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MDIO bus driver for the Xilinx Axi Ethernet device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. + */ + +#include +#include +#include + +#include "xilinx_axienet.h" + +#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */ +#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT + +/* Wait till MDIO interface is ready to accept a new transaction.*/ +int axienet_mdio_wait_until_ready(struct axienet_local *lp) +{ + unsigned long end = jiffies + 2; + while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) & + XAE_MDIO_MCR_READY_MASK)) { + if (time_before_eq(end, jiffies)) { + WARN_ON(1); + return -ETIMEDOUT; + } + udelay(1); + } + return 0; +} + +/** + * axienet_mdio_read - MDIO interface read function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to read + * + * Return: The register contents on success, -ETIMEDOUT on a timeout + * + * Reads the contents of the requested register from the requested PHY + * address by first writing the details into MCR register. After a while + * the register MRD is read to obtain the PHY register content. + */ +static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + u32 rc; + int ret; + struct axienet_local *lp = bus->priv; + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_READ_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF; + + dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +/** + * axienet_mdio_write - MDIO interface write function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to write to + * @val: Value to be written into the register + * + * Return: 0 on success, -ETIMEDOUT on a timeout + * + * Writes the value to the requested register by first writing the value + * into MWD register. The the MCR register is then appropriately setup + * to finish the write operation. + */ +static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + int ret; + struct axienet_local *lp = bus->priv; + + dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val); + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_WRITE_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + return 0; +} + +/** + * axienet_mdio_setup - MDIO setup function + * @lp: Pointer to axienet local data structure. + * @np: Pointer to device node + * + * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when + * mdiobus_alloc (to allocate memory for mii bus structure) fails. + * + * Sets up the MDIO interface by initializing the MDIO clock and enabling the + * MDIO interface in hardware. Register the MDIO interface. + **/ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) +{ + int ret; + u32 clk_div, host_clock; + struct mii_bus *bus; + struct resource res; + struct device_node *np1; + + /* clk_div can be calculated by deriving it from the equation: + * fMDIO = fHOST / ((1 + clk_div) * 2) + * + * Where fMDIO <= 2500000, so we get: + * fHOST / ((1 + clk_div) * 2) <= 2500000 + * + * Then we get: + * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= (5000000 / fHOST) + * + * So: + * (1 + clk_div) >= (fHOST / 5000000) + * + * And finally: + * clk_div >= (fHOST / 5000000) - 1 + * + * fHOST can be read from the flattened device tree as property + * "clock-frequency" from the CPU + */ + + np1 = of_find_node_by_name(NULL, "cpu"); + if (!np1) { + netdev_warn(lp->ndev, "Could not find CPU device node.\n"); + netdev_warn(lp->ndev, + "Setting MDIO clock divisor to default %d\n", + DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + goto issue; + } + if (of_property_read_u32(np1, "clock-frequency", &host_clock)) { + netdev_warn(lp->ndev, "clock-frequency property not found.\n"); + netdev_warn(lp->ndev, + "Setting MDIO clock divisor to default %d\n", + DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + of_node_put(np1); + goto issue; + } + + clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; + /* If there is any remainder from the division of + * fHOST / (MAX_MDIO_FREQ * 2), then we need to add + * 1 to the clock divisor or we will surely be above 2.5 MHz + */ + if (host_clock % (MAX_MDIO_FREQ * 2)) + clk_div++; + + netdev_dbg(lp->ndev, + "Setting MDIO clock divisor to %u/%u Hz host clock.\n", + clk_div, host_clock); + + of_node_put(np1); +issue: + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + np1 = of_get_parent(lp->phy_node); + of_address_to_resource(np1, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long) res.start); + + bus->priv = lp; + bus->name = "Xilinx Axi Ethernet MDIO"; + bus->read = axienet_mdio_read; + bus->write = axienet_mdio_write; + bus->parent = lp->dev; + lp->mii_bus = bus; + + ret = of_mdiobus_register(bus, np1); + if (ret) { + mdiobus_free(bus); + lp->mii_bus = NULL; + return ret; + } + return 0; +} + +/** + * axienet_mdio_teardown - MDIO remove function + * @lp: Pointer to axienet local data structure. + * + * Unregisters the MDIO and frees any associate memory for mii bus. + */ +void axienet_mdio_teardown(struct axienet_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +} -- cgit v1.2.3