From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4425 ++++++++++++++++++++ 1 file changed, 4425 insertions(+) create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c (limited to 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c') diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c new file mode 100644 index 000000000..0a96c1071 --- /dev/null +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -0,0 +1,4425 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "sdio.h" +#include "chip.h" +#include "firmware.h" +#include "core.h" +#include "common.h" +#include "bcdc.h" + +#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) +#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) + +/* watermark expressed in number of words */ +#define DEFAULT_F2_WATERMARK 0x8 +#define CY_4373_F2_WATERMARK 0x40 + +#ifdef DEBUG + +#define BRCMF_TRAP_INFO_SIZE 80 + +#define CBUF_LEN (128) + +/* Device console log buffer state */ +#define CONSOLE_BUFFER_MAX 2024 + +struct rte_log_le { + __le32 buf; /* Can't be pointer on (64-bit) hosts */ + __le32 buf_size; + __le32 idx; + char *_buf_compat; /* Redundant pointer for backward compat. */ +}; + +struct rte_console { + /* Virtual UART + * When there is no UART (e.g. Quickturn), + * the host should write a complete + * input line directly into cbuf and then write + * the length into vcons_in. + * This may also be used when there is a real UART + * (at risk of conflicting with + * the real UART). vcons_out is currently unused. + */ + uint vcons_in; + uint vcons_out; + + /* Output (logging) buffer + * Console output is written to a ring buffer log_buf at index log_idx. + * The host may read the output when it sees log_idx advance. + * Output will be lost if the output wraps around faster than the host + * polls. + */ + struct rte_log_le log_le; + + /* Console input line buffer + * Characters are read one at a time into cbuf + * until is received, then + * the buffer is processed as a command line. + * Also used for virtual UART. + */ + uint cbuf_idx; + char cbuf[CBUF_LEN]; +}; + +#endif /* DEBUG */ +#include + +#include "bus.h" +#include "debug.h" +#include "tracepoint.h" + +#define TXQLEN 2048 /* bulk tx queue length */ +#define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */ +#define TXLOW (TXHI - 256) /* turn off flow control below TXLOW */ +#define PRIOMASK 7 + +#define TXRETRIES 2 /* # of retries for tx frames */ + +#define BRCMF_RXBOUND 50 /* Default for max rx frames in + one scheduling */ + +#define BRCMF_TXBOUND 20 /* Default for max tx frames in + one scheduling */ + +#define BRCMF_TXMINMAX 1 /* Max tx frames if rx still pending */ + +#define MEMBLOCK 2048 /* Block size used for downloading + of dongle image */ +#define MAX_DATA_BUF (32 * 1024) /* Must be large enough to hold + biggest possible glom */ + +#define BRCMF_FIRSTREAD (1 << 6) + +#define BRCMF_CONSOLE 10 /* watchdog interval to poll console */ + +/* SBSDIO_DEVICE_CTL */ + +/* 1: device will assert busy signal when receiving CMD53 */ +#define SBSDIO_DEVCTL_SETBUSY 0x01 +/* 1: assertion of sdio interrupt is synchronous to the sdio clock */ +#define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02 +/* 1: mask all interrupts to host except the chipActive (rev 8) */ +#define SBSDIO_DEVCTL_CA_INT_ONLY 0x04 +/* 1: isolate internal sdio signals, put external pads in tri-state; requires + * sdio bus power cycle to clear (rev 9) */ +#define SBSDIO_DEVCTL_PADS_ISO 0x08 +/* 1: enable F2 Watermark */ +#define SBSDIO_DEVCTL_F2WM_ENAB 0x10 +/* Force SD->SB reset mapping (rev 11) */ +#define SBSDIO_DEVCTL_SB_RST_CTL 0x30 +/* Determined by CoreControl bit */ +#define SBSDIO_DEVCTL_RST_CORECTL 0x00 +/* Force backplane reset */ +#define SBSDIO_DEVCTL_RST_BPRESET 0x10 +/* Force no backplane reset */ +#define SBSDIO_DEVCTL_RST_NOBPRESET 0x20 + +/* direct(mapped) cis space */ + +/* MAPPED common CIS address */ +#define SBSDIO_CIS_BASE_COMMON 0x1000 +/* maximum bytes in one CIS */ +#define SBSDIO_CIS_SIZE_LIMIT 0x200 +/* cis offset addr is < 17 bits */ +#define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF + +/* manfid tuple length, include tuple, link bytes */ +#define SBSDIO_CIS_MANFID_TUPLE_LEN 6 + +#define SD_REG(field) \ + (offsetof(struct sdpcmd_regs, field)) + +/* SDIO function 1 register CHIPCLKCSR */ +/* Force ALP request to backplane */ +#define SBSDIO_FORCE_ALP 0x01 +/* Force HT request to backplane */ +#define SBSDIO_FORCE_HT 0x02 +/* Force ILP request to backplane */ +#define SBSDIO_FORCE_ILP 0x04 +/* Make ALP ready (power up xtal) */ +#define SBSDIO_ALP_AVAIL_REQ 0x08 +/* Make HT ready (power up PLL) */ +#define SBSDIO_HT_AVAIL_REQ 0x10 +/* Squelch clock requests from HW */ +#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 +/* Status: ALP is ready */ +#define SBSDIO_ALP_AVAIL 0x40 +/* Status: HT is ready */ +#define SBSDIO_HT_AVAIL 0x80 +#define SBSDIO_CSR_MASK 0x1F +#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) +#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) +#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) +#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) +#define SBSDIO_CLKAV(regval, alponly) \ + (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) + +/* intstatus */ +#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */ +#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */ +#define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */ +#define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */ +#define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */ +#define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */ +#define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */ +#define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */ +#define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */ +#define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */ +#define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */ +#define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */ +#define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */ +#define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */ +#define I_PC (1 << 10) /* descriptor error */ +#define I_PD (1 << 11) /* data error */ +#define I_DE (1 << 12) /* Descriptor protocol Error */ +#define I_RU (1 << 13) /* Receive descriptor Underflow */ +#define I_RO (1 << 14) /* Receive fifo Overflow */ +#define I_XU (1 << 15) /* Transmit fifo Underflow */ +#define I_RI (1 << 16) /* Receive Interrupt */ +#define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */ +#define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */ +#define I_XI (1 << 24) /* Transmit Interrupt */ +#define I_RF_TERM (1 << 25) /* Read Frame Terminate */ +#define I_WF_TERM (1 << 26) /* Write Frame Terminate */ +#define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */ +#define I_SBINT (1 << 28) /* sbintstatus Interrupt */ +#define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */ +#define I_SRESET (1 << 30) /* CCCR RES interrupt */ +#define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */ +#define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU) +#define I_DMA (I_RI | I_XI | I_ERRORS) + +/* corecontrol */ +#define CC_CISRDY (1 << 0) /* CIS Ready */ +#define CC_BPRESEN (1 << 1) /* CCCR RES signal */ +#define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */ +#define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */ +#define CC_XMTDATAAVAIL_MODE (1 << 4) +#define CC_XMTDATAAVAIL_CTRL (1 << 5) + +/* SDA_FRAMECTRL */ +#define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */ +#define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */ +#define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */ +#define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */ + +/* + * Software allocation of To SB Mailbox resources + */ + +/* tosbmailbox bits corresponding to intstatus bits */ +#define SMB_NAK (1 << 0) /* Frame NAK */ +#define SMB_INT_ACK (1 << 1) /* Host Interrupt ACK */ +#define SMB_USE_OOB (1 << 2) /* Use OOB Wakeup */ +#define SMB_DEV_INT (1 << 3) /* Miscellaneous Interrupt */ + +/* tosbmailboxdata */ +#define SMB_DATA_VERSION_SHIFT 16 /* host protocol version */ + +/* + * Software allocation of To Host Mailbox resources + */ + +/* intstatus bits */ +#define I_HMB_FC_STATE I_HMB_SW0 /* Flow Control State */ +#define I_HMB_FC_CHANGE I_HMB_SW1 /* Flow Control State Changed */ +#define I_HMB_FRAME_IND I_HMB_SW2 /* Frame Indication */ +#define I_HMB_HOST_INT I_HMB_SW3 /* Miscellaneous Interrupt */ + +/* tohostmailboxdata */ +#define HMB_DATA_NAKHANDLED 0x0001 /* retransmit NAK'd frame */ +#define HMB_DATA_DEVREADY 0x0002 /* talk to host after enable */ +#define HMB_DATA_FC 0x0004 /* per prio flowcontrol update flag */ +#define HMB_DATA_FWREADY 0x0008 /* fw ready for protocol activity */ +#define HMB_DATA_FWHALT 0x0010 /* firmware halted */ + +#define HMB_DATA_FCDATA_MASK 0xff000000 +#define HMB_DATA_FCDATA_SHIFT 24 + +#define HMB_DATA_VERSION_MASK 0x00ff0000 +#define HMB_DATA_VERSION_SHIFT 16 + +/* + * Software-defined protocol header + */ + +/* Current protocol version */ +#define SDPCM_PROT_VERSION 4 + +/* + * Shared structure between dongle and the host. + * The structure contains pointers to trap or assert information. + */ +#define SDPCM_SHARED_VERSION 0x0003 +#define SDPCM_SHARED_VERSION_MASK 0x00FF +#define SDPCM_SHARED_ASSERT_BUILT 0x0100 +#define SDPCM_SHARED_ASSERT 0x0200 +#define SDPCM_SHARED_TRAP 0x0400 + +/* Space for header read, limit for data packets */ +#define MAX_HDR_READ (1 << 6) +#define MAX_RX_DATASZ 2048 + +/* Bump up limit on waiting for HT to account for first startup; + * if the image is doing a CRC calculation before programming the PMU + * for HT availability, it could take a couple hundred ms more, so + * max out at a 1 second (1000000us). + */ +#undef PMU_MAX_TRANSITION_DLY +#define PMU_MAX_TRANSITION_DLY 1000000 + +/* Value for ChipClockCSR during initial setup */ +#define BRCMF_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | \ + SBSDIO_ALP_AVAIL_REQ) + +/* Flags for SDH calls */ +#define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) + +#define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change + * when idle + */ +#define BRCMF_IDLE_INTERVAL 1 + +#define KSO_WAIT_US 50 +#define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US) +#define BRCMF_SDIO_MAX_ACCESS_ERRORS 5 + +/* + * Conversion of 802.1D priority to precedence level + */ +static uint prio2prec(u32 prio) +{ + return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ? + (prio^2) : prio; +} + +#ifdef DEBUG +/* Device console log buffer state */ +struct brcmf_console { + uint count; /* Poll interval msec counter */ + uint log_addr; /* Log struct address (fixed) */ + struct rte_log_le log_le; /* Log struct (host copy) */ + uint bufsize; /* Size of log buffer */ + u8 *buf; /* Log buffer (host copy) */ + uint last; /* Last buffer read index */ +}; + +struct brcmf_trap_info { + __le32 type; + __le32 epc; + __le32 cpsr; + __le32 spsr; + __le32 r0; /* a1 */ + __le32 r1; /* a2 */ + __le32 r2; /* a3 */ + __le32 r3; /* a4 */ + __le32 r4; /* v1 */ + __le32 r5; /* v2 */ + __le32 r6; /* v3 */ + __le32 r7; /* v4 */ + __le32 r8; /* v5 */ + __le32 r9; /* sb/v6 */ + __le32 r10; /* sl/v7 */ + __le32 r11; /* fp/v8 */ + __le32 r12; /* ip */ + __le32 r13; /* sp */ + __le32 r14; /* lr */ + __le32 pc; /* r15 */ +}; +#endif /* DEBUG */ + +struct sdpcm_shared { + u32 flags; + u32 trap_addr; + u32 assert_exp_addr; + u32 assert_file_addr; + u32 assert_line; + u32 console_addr; /* Address of struct rte_console */ + u32 msgtrace_addr; + u8 tag[32]; + u32 brpt_addr; +}; + +struct sdpcm_shared_le { + __le32 flags; + __le32 trap_addr; + __le32 assert_exp_addr; + __le32 assert_file_addr; + __le32 assert_line; + __le32 console_addr; /* Address of struct rte_console */ + __le32 msgtrace_addr; + u8 tag[32]; + __le32 brpt_addr; +}; + +/* dongle SDIO bus specific header info */ +struct brcmf_sdio_hdrinfo { + u8 seq_num; + u8 channel; + u16 len; + u16 len_left; + u16 len_nxtfrm; + u8 dat_offset; + bool lastfrm; + u16 tail_pad; +}; + +/* + * hold counter variables + */ +struct brcmf_sdio_count { + uint intrcount; /* Count of device interrupt callbacks */ + uint lastintrs; /* Count as of last watchdog timer */ + uint pollcnt; /* Count of active polls */ + uint regfails; /* Count of R_REG failures */ + uint tx_sderrs; /* Count of tx attempts with sd errors */ + uint fcqueued; /* Tx packets that got queued */ + uint rxrtx; /* Count of rtx requests (NAK to dongle) */ + uint rx_toolong; /* Receive frames too long to receive */ + uint rxc_errors; /* SDIO errors when reading control frames */ + uint rx_hdrfail; /* SDIO errors on header reads */ + uint rx_badhdr; /* Bad received headers (roosync?) */ + uint rx_badseq; /* Mismatched rx sequence number */ + uint fc_rcvd; /* Number of flow-control events received */ + uint fc_xoff; /* Number which turned on flow-control */ + uint fc_xon; /* Number which turned off flow-control */ + uint rxglomfail; /* Failed deglom attempts */ + uint rxglomframes; /* Number of glom frames (superframes) */ + uint rxglompkts; /* Number of packets from glom frames */ + uint f2rxhdrs; /* Number of header reads */ + uint f2rxdata; /* Number of frame data reads */ + uint f2txdata; /* Number of f2 frame writes */ + uint f1regdata; /* Number of f1 register accesses */ + uint tickcnt; /* Number of watchdog been schedule */ + ulong tx_ctlerrs; /* Err of sending ctrl frames */ + ulong tx_ctlpkts; /* Ctrl frames sent to dongle */ + ulong rx_ctlerrs; /* Err of processing rx ctrl frames */ + ulong rx_ctlpkts; /* Ctrl frames processed from dongle */ + ulong rx_readahead_cnt; /* packets where header read-ahead was used */ +}; + +/* misc chip info needed by some of the routines */ +/* Private data for SDIO bus interaction */ +struct brcmf_sdio { + struct brcmf_sdio_dev *sdiodev; /* sdio device handler */ + struct brcmf_chip *ci; /* Chip info struct */ + struct brcmf_core *sdio_core; /* sdio core info struct */ + + u32 hostintmask; /* Copy of Host Interrupt Mask */ + atomic_t intstatus; /* Intstatus bits (events) pending */ + atomic_t fcstate; /* State of dongle flow-control */ + + uint blocksize; /* Block size of SDIO transfers */ + uint roundup; /* Max roundup limit */ + + struct pktq txq; /* Queue length used for flow-control */ + u8 flowcontrol; /* per prio flow control bitmask */ + u8 tx_seq; /* Transmit sequence number (next) */ + u8 tx_max; /* Maximum transmit sequence allowed */ + + u8 *hdrbuf; /* buffer for handling rx frame */ + u8 *rxhdr; /* Header of current rx frame (in hdrbuf) */ + u8 rx_seq; /* Receive sequence number (expected) */ + struct brcmf_sdio_hdrinfo cur_read; + /* info of current read frame */ + bool rxskip; /* Skip receive (awaiting NAK ACK) */ + bool rxpending; /* Data frame pending in dongle */ + + uint rxbound; /* Rx frames to read before resched */ + uint txbound; /* Tx frames to send before resched */ + uint txminmax; + + struct sk_buff *glomd; /* Packet containing glomming descriptor */ + struct sk_buff_head glom; /* Packet list for glommed superframe */ + + u8 *rxbuf; /* Buffer for receiving control packets */ + uint rxblen; /* Allocated length of rxbuf */ + u8 *rxctl; /* Aligned pointer into rxbuf */ + u8 *rxctl_orig; /* pointer for freeing rxctl */ + uint rxlen; /* Length of valid data in buffer */ + spinlock_t rxctl_lock; /* protection lock for ctrl frame resources */ + + u8 sdpcm_ver; /* Bus protocol reported by dongle */ + + bool intr; /* Use interrupts */ + bool poll; /* Use polling */ + atomic_t ipend; /* Device interrupt is pending */ + uint spurious; /* Count of spurious interrupts */ + uint pollrate; /* Ticks between device polls */ + uint polltick; /* Tick counter */ + +#ifdef DEBUG + uint console_interval; + struct brcmf_console console; /* Console output polling support */ + uint console_addr; /* Console address from shared struct */ +#endif /* DEBUG */ + + uint clkstate; /* State of sd and backplane clock(s) */ + s32 idletime; /* Control for activity timeout */ + s32 idlecount; /* Activity timeout counter */ + s32 idleclock; /* How to set bus driver when idle */ + bool rxflow_mode; /* Rx flow control mode */ + bool rxflow; /* Is rx flow control on */ + bool alp_only; /* Don't use HT clock (ALP only) */ + + u8 *ctrl_frame_buf; + u16 ctrl_frame_len; + bool ctrl_frame_stat; + int ctrl_frame_err; + + spinlock_t txq_lock; /* protect bus->txq */ + wait_queue_head_t ctrl_wait; + wait_queue_head_t dcmd_resp_wait; + + struct timer_list timer; + struct completion watchdog_wait; + struct task_struct *watchdog_tsk; + bool wd_active; + + struct workqueue_struct *brcmf_wq; + struct work_struct datawork; + bool dpc_triggered; + bool dpc_running; + + bool txoff; /* Transmit flow-controlled */ + struct brcmf_sdio_count sdcnt; + bool sr_enabled; /* SaveRestore enabled */ + bool sleeping; + + u8 tx_hdrlen; /* sdio bus header length for tx packet */ + bool txglom; /* host tx glomming enable flag */ + u16 head_align; /* buffer pointer alignment */ + u16 sgentry_align; /* scatter-gather buffer alignment */ +}; + +/* clkstate */ +#define CLK_NONE 0 +#define CLK_SDONLY 1 +#define CLK_PENDING 2 +#define CLK_AVAIL 3 + +#ifdef DEBUG +static int qcount[NUMPRIO]; +#endif /* DEBUG */ + +#define DEFAULT_SDIO_DRIVE_STRENGTH 6 /* in milliamps */ + +#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL) + +/* Limit on rounding up frames */ +static const uint max_roundup = 512; + +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT +#define ALIGNMENT 8 +#else +#define ALIGNMENT 4 +#endif + +enum brcmf_sdio_frmtype { + BRCMF_SDIO_FT_NORMAL, + BRCMF_SDIO_FT_SUPER, + BRCMF_SDIO_FT_SUB, +}; + +#define SDIOD_DRVSTR_KEY(chip, pmu) (((unsigned int)(chip) << 16) | (pmu)) + +/* SDIO Pad drive strength to select value mappings */ +struct sdiod_drive_str { + u8 strength; /* Pad Drive Strength in mA */ + u8 sel; /* Chip-specific select value */ +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = { + {32, 0x6}, + {26, 0x7}, + {22, 0x4}, + {16, 0x5}, + {12, 0x2}, + {8, 0x3}, + {4, 0x0}, + {0, 0x1} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */ +static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = { + {6, 0x7}, + {5, 0x6}, + {4, 0x5}, + {3, 0x4}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} +}; + +/* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */ +static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = { + {3, 0x3}, + {2, 0x2}, + {1, 0x1}, + {0, 0x0} }; + +/* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */ +static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = { + {16, 0x7}, + {12, 0x5}, + {8, 0x3}, + {4, 0x1} +}; + +BRCMF_FW_DEF(43143, "brcmfmac43143-sdio"); +BRCMF_FW_DEF(43241B0, "brcmfmac43241b0-sdio"); +BRCMF_FW_DEF(43241B4, "brcmfmac43241b4-sdio"); +BRCMF_FW_DEF(43241B5, "brcmfmac43241b5-sdio"); +BRCMF_FW_DEF(4329, "brcmfmac4329-sdio"); +BRCMF_FW_DEF(4330, "brcmfmac4330-sdio"); +BRCMF_FW_DEF(4334, "brcmfmac4334-sdio"); +BRCMF_FW_DEF(43340, "brcmfmac43340-sdio"); +BRCMF_FW_DEF(4335, "brcmfmac4335-sdio"); +BRCMF_FW_DEF(43362, "brcmfmac43362-sdio"); +BRCMF_FW_DEF(4339, "brcmfmac4339-sdio"); +BRCMF_FW_DEF(43430A0, "brcmfmac43430a0-sdio"); +/* Note the names are not postfixed with a1 for backward compatibility */ +BRCMF_FW_DEF(43430A1, "brcmfmac43430-sdio"); +BRCMF_FW_DEF(43455, "brcmfmac43455-sdio"); +BRCMF_FW_DEF(4354, "brcmfmac4354-sdio"); +BRCMF_FW_DEF(4356, "brcmfmac4356-sdio"); +BRCMF_FW_DEF(4373, "brcmfmac4373-sdio"); + +static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = { + BRCMF_FW_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143), + BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0), + BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4), + BRCMF_FW_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5), + BRCMF_FW_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329), + BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330), + BRCMF_FW_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334), + BRCMF_FW_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340), + BRCMF_FW_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340), + BRCMF_FW_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335), + BRCMF_FW_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362), + BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339), + BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0), + BRCMF_FW_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFE, 43430A1), + BRCMF_FW_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455), + BRCMF_FW_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354), + BRCMF_FW_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356), + BRCMF_FW_ENTRY(CY_CC_4373_CHIP_ID, 0xFFFFFFFF, 4373) +}; + +static void pkt_align(struct sk_buff *p, int len, int align) +{ + uint datalign; + datalign = (unsigned long)(p->data); + datalign = roundup(datalign, (align)) - datalign; + if (datalign) + skb_pull(p, datalign); + __skb_trim(p, len); +} + +/* To check if there's window offered */ +static bool data_ok(struct brcmf_sdio *bus) +{ + return (u8)(bus->tx_max - bus->tx_seq) != 0 && + ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0; +} + +static int +brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on) +{ + u8 wr_val = 0, rd_val, cmp_val, bmask; + int err = 0; + int err_cnt = 0; + int try_cnt = 0; + + brcmf_dbg(TRACE, "Enter: on=%d\n", on); + + sdio_retune_crc_disable(bus->sdiodev->func1); + + /* Cannot re-tune if device is asleep; defer till we're awake */ + if (on) + sdio_retune_hold_now(bus->sdiodev->func1); + + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + /* 1st KSO write goes to AOS wake up core if device is asleep */ + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, &err); + + if (on) { + /* device WAKEUP through KSO: + * write bit 0 & read back until + * both bits 0 (kso bit) & 1 (dev on status) are set + */ + cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK | + SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK; + bmask = cmp_val; + usleep_range(2000, 3000); + } else { + /* Put device to sleep, turn off KSO */ + cmp_val = 0; + /* only check for bit0, bit1(dev on status) may not + * get cleared right away + */ + bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK; + } + + do { + /* reliable KSO bit set/clr: + * the sdiod sleep write access is synced to PMU 32khz clk + * just one write attempt may fail, + * read it back until it matches written value + */ + rd_val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); + if (!err) { + if ((rd_val & bmask) == cmp_val) + break; + err_cnt = 0; + } + /* bail out upon subsequent access errors */ + if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS)) + break; + + udelay(KSO_WAIT_US); + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, wr_val, + &err); + + } while (try_cnt++ < MAX_KSO_ATTEMPTS); + + if (try_cnt > 2) + brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt, + rd_val, err); + + if (try_cnt > MAX_KSO_ATTEMPTS) + brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err); + + if (on) + sdio_retune_release(bus->sdiodev->func1); + + sdio_retune_crc_enable(bus->sdiodev->func1); + + return err; +} + +#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) + +/* Turn backplane clock on or off */ +static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok) +{ + int err; + u8 clkctl, clkreq, devctl; + unsigned long timeout; + + brcmf_dbg(SDIO, "Enter\n"); + + clkctl = 0; + + if (bus->sr_enabled) { + bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY); + return 0; + } + + if (on) { + /* Request HT Avail */ + clkreq = + bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ; + + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); + if (err) { + brcmf_err("HT Avail request error: %d\n", err); + return -EBADE; + } + + /* Check current status */ + clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (err) { + brcmf_err("HT Avail read error: %d\n", err); + return -EBADE; + } + + /* Go to pending and await interrupt if appropriate */ + if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) { + /* Allow only clock-available interrupt */ + devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + if (err) { + brcmf_err("Devctl error setting CA: %d\n", err); + return -EBADE; + } + + devctl |= SBSDIO_DEVCTL_CA_INT_ONLY; + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); + brcmf_dbg(SDIO, "CLKCTL: set PENDING\n"); + bus->clkstate = CLK_PENDING; + + return 0; + } else if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ + devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); + } + + /* Otherwise, wait here (polling) for HT Avail */ + timeout = jiffies + + msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000); + while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { + clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (time_after(jiffies, timeout)) + break; + else + usleep_range(5000, 10000); + } + if (err) { + brcmf_err("HT Avail request error: %d\n", err); + return -EBADE; + } + if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) { + brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n", + PMU_MAX_TRANSITION_DLY, clkctl); + return -EBADE; + } + + /* Mark clock available */ + bus->clkstate = CLK_AVAIL; + brcmf_dbg(SDIO, "CLKCTL: turned ON\n"); + +#if defined(DEBUG) + if (!bus->alp_only) { + if (SBSDIO_ALPONLY(clkctl)) + brcmf_err("HT Clock should be on\n"); + } +#endif /* defined (DEBUG) */ + + } else { + clkreq = 0; + + if (bus->clkstate == CLK_PENDING) { + /* Cancel CA-only interrupt filter */ + devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_DEVICE_CTL, + devctl, &err); + } + + bus->clkstate = CLK_SDONLY; + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + clkreq, &err); + brcmf_dbg(SDIO, "CLKCTL: turned OFF\n"); + if (err) { + brcmf_err("Failed access turning clock off: %d\n", + err); + return -EBADE; + } + } + return 0; +} + +/* Change idle/active SD state */ +static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on) +{ + brcmf_dbg(SDIO, "Enter\n"); + + if (on) + bus->clkstate = CLK_SDONLY; + else + bus->clkstate = CLK_NONE; + + return 0; +} + +/* Transition SD and backplane clock readiness */ +static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) +{ +#ifdef DEBUG + uint oldstate = bus->clkstate; +#endif /* DEBUG */ + + brcmf_dbg(SDIO, "Enter\n"); + + /* Early exit if we're already there */ + if (bus->clkstate == target) + return 0; + + switch (target) { + case CLK_AVAIL: + /* Make sure SD clock is available */ + if (bus->clkstate == CLK_NONE) + brcmf_sdio_sdclk(bus, true); + /* Now request HT Avail on the backplane */ + brcmf_sdio_htclk(bus, true, pendok); + break; + + case CLK_SDONLY: + /* Remove HT request, or bring up SD clock */ + if (bus->clkstate == CLK_NONE) + brcmf_sdio_sdclk(bus, true); + else if (bus->clkstate == CLK_AVAIL) + brcmf_sdio_htclk(bus, false, false); + else + brcmf_err("request for %d -> %d\n", + bus->clkstate, target); + break; + + case CLK_NONE: + /* Make sure to remove HT request */ + if (bus->clkstate == CLK_AVAIL) + brcmf_sdio_htclk(bus, false, false); + /* Now remove the SD clock */ + brcmf_sdio_sdclk(bus, false); + break; + } +#ifdef DEBUG + brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate); +#endif /* DEBUG */ + + return 0; +} + +static int +brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) +{ + int err = 0; + u8 clkcsr; + + brcmf_dbg(SDIO, "Enter: request %s currently %s\n", + (sleep ? "SLEEP" : "WAKE"), + (bus->sleeping ? "SLEEP" : "WAKE")); + + /* If SR is enabled control bus state with KSO */ + if (bus->sr_enabled) { + /* Done if we're already in the requested state */ + if (sleep == bus->sleeping) + goto end; + + /* Going to sleep */ + if (sleep) { + clkcsr = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if ((clkcsr & SBSDIO_CSR_MASK) == 0) { + brcmf_dbg(SDIO, "no clock, set ALP\n"); + brcmf_sdiod_writeb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_ALP_AVAIL_REQ, &err); + } + err = brcmf_sdio_kso_control(bus, false); + } else { + err = brcmf_sdio_kso_control(bus, true); + } + if (err) { + brcmf_err("error while changing bus sleep state %d\n", + err); + goto done; + } + } + +end: + /* control clocks */ + if (sleep) { + if (!bus->sr_enabled) + brcmf_sdio_clkctl(bus, CLK_NONE, pendok); + } else { + brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok); + brcmf_sdio_wd_timer(bus, true); + } + bus->sleeping = sleep; + brcmf_dbg(SDIO, "new state %s\n", + (sleep ? "SLEEP" : "WAKE")); +done: + brcmf_dbg(SDIO, "Exit: err=%d\n", err); + return err; + +} + +#ifdef DEBUG +static inline bool brcmf_sdio_valid_shared_address(u32 addr) +{ + return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)); +} + +static int brcmf_sdio_readshared(struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + u32 addr = 0; + int rv; + u32 shaddr = 0; + struct sdpcm_shared_le sh_le; + __le32 addr_le; + + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_bus_sleep(bus, false, false); + + /* + * Read last word in socram to determine + * address of sdpcm_shared structure + */ + shaddr = bus->ci->rambase + bus->ci->ramsize - 4; + if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci)) + shaddr -= bus->ci->srsize; + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr, + (u8 *)&addr_le, 4); + if (rv < 0) + goto fail; + + /* + * Check if addr is valid. + * NVRAM length at the end of memory should have been overwritten. + */ + addr = le32_to_cpu(addr_le); + if (!brcmf_sdio_valid_shared_address(addr)) { + brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr); + rv = -EINVAL; + goto fail; + } + + brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr); + + /* Read hndrte_shared structure */ + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le, + sizeof(struct sdpcm_shared_le)); + if (rv < 0) + goto fail; + + sdio_release_host(bus->sdiodev->func1); + + /* Endianness */ + sh->flags = le32_to_cpu(sh_le.flags); + sh->trap_addr = le32_to_cpu(sh_le.trap_addr); + sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr); + sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr); + sh->assert_line = le32_to_cpu(sh_le.assert_line); + sh->console_addr = le32_to_cpu(sh_le.console_addr); + sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr); + + if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) { + brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n", + SDPCM_SHARED_VERSION, + sh->flags & SDPCM_SHARED_VERSION_MASK); + return -EPROTO; + } + return 0; + +fail: + brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n", + rv, addr); + sdio_release_host(bus->sdiodev->func1); + return rv; +} + +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ + struct sdpcm_shared sh; + + if (brcmf_sdio_readshared(bus, &sh) == 0) + bus->console_addr = sh.console_addr; +} +#else +static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus) +{ +} +#endif /* DEBUG */ + +static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiod = bus->sdiodev; + struct brcmf_core *core = bus->sdio_core; + u32 intstatus = 0; + u32 hmb_data; + u8 fcbits; + int ret; + + brcmf_dbg(SDIO, "Enter\n"); + + /* Read mailbox data and ack that we did so */ + hmb_data = brcmf_sdiod_readl(sdiod, + core->base + SD_REG(tohostmailboxdata), + &ret); + + if (!ret) + brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox), + SMB_INT_ACK, &ret); + + bus->sdcnt.f1regdata += 2; + + /* dongle indicates the firmware has halted/crashed */ + if (hmb_data & HMB_DATA_FWHALT) { + brcmf_err("mailbox indicates firmware halted\n"); + brcmf_dev_coredump(&sdiod->func1->dev); + } + + /* Dongle recomposed rx frames, accept them again */ + if (hmb_data & HMB_DATA_NAKHANDLED) { + brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n", + bus->rx_seq); + if (!bus->rxskip) + brcmf_err("unexpected NAKHANDLED!\n"); + + bus->rxskip = false; + intstatus |= I_HMB_FRAME_IND; + } + + /* + * DEVREADY does not occur with gSPI. + */ + if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) { + bus->sdpcm_ver = + (hmb_data & HMB_DATA_VERSION_MASK) >> + HMB_DATA_VERSION_SHIFT; + if (bus->sdpcm_ver != SDPCM_PROT_VERSION) + brcmf_err("Version mismatch, dongle reports %d, " + "expecting %d\n", + bus->sdpcm_ver, SDPCM_PROT_VERSION); + else + brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n", + bus->sdpcm_ver); + + /* + * Retrieve console state address now that firmware should have + * updated it. + */ + brcmf_sdio_get_console_addr(bus); + } + + /* + * Flow Control has been moved into the RX headers and this out of band + * method isn't used any more. + * remaining backward compatible with older dongles. + */ + if (hmb_data & HMB_DATA_FC) { + fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >> + HMB_DATA_FCDATA_SHIFT; + + if (fcbits & ~bus->flowcontrol) + bus->sdcnt.fc_xoff++; + + if (bus->flowcontrol & ~fcbits) + bus->sdcnt.fc_xon++; + + bus->sdcnt.fc_rcvd++; + bus->flowcontrol = fcbits; + } + + /* Shouldn't be any others */ + if (hmb_data & ~(HMB_DATA_DEVREADY | + HMB_DATA_NAKHANDLED | + HMB_DATA_FC | + HMB_DATA_FWREADY | + HMB_DATA_FWHALT | + HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK)) + brcmf_err("Unknown mailbox data content: 0x%02x\n", + hmb_data); + + return intstatus; +} + +static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx) +{ + struct brcmf_sdio_dev *sdiod = bus->sdiodev; + struct brcmf_core *core = bus->sdio_core; + uint retries = 0; + u16 lastrbc; + u8 hi, lo; + int err; + + brcmf_err("%sterminate frame%s\n", + abort ? "abort command, " : "", + rtx ? ", send NAK" : ""); + + if (abort) + brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func2); + + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, + &err); + bus->sdcnt.f1regdata++; + + /* Wait until the packet has been flushed (device/FIFO stable) */ + for (lastrbc = retries = 0xffff; retries > 0; retries--) { + hi = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCHI, + &err); + lo = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_RFRAMEBCLO, + &err); + bus->sdcnt.f1regdata += 2; + + if ((hi == 0) && (lo == 0)) + break; + + if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) { + brcmf_err("count growing: last 0x%04x now 0x%04x\n", + lastrbc, (hi << 8) + lo); + } + lastrbc = (hi << 8) + lo; + } + + if (!retries) + brcmf_err("count never zeroed: last 0x%04x\n", lastrbc); + else + brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries); + + if (rtx) { + bus->sdcnt.rxrtx++; + brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailbox), + SMB_NAK, &err); + + bus->sdcnt.f1regdata++; + if (err == 0) + bus->rxskip = true; + } + + /* Clear partial in any case */ + bus->cur_read.len = 0; +} + +static void brcmf_sdio_txfail(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiodev = bus->sdiodev; + u8 i, hi, lo; + + /* On failure, abort the command and terminate the frame */ + brcmf_err("sdio error, abort command and terminate frame\n"); + bus->sdcnt.tx_sderrs++; + + brcmf_sdiod_abort(sdiodev, sdiodev->func2); + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL); + bus->sdcnt.f1regdata++; + + for (i = 0; i < 3; i++) { + hi = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL); + lo = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL); + bus->sdcnt.f1regdata += 2; + if ((hi == 0) && (lo == 0)) + break; + } +} + +/* return total length of buffer chain */ +static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus) +{ + struct sk_buff *p; + uint total; + + total = 0; + skb_queue_walk(&bus->glom, p) + total += p->len; + return total; +} + +static void brcmf_sdio_free_glom(struct brcmf_sdio *bus) +{ + struct sk_buff *cur, *next; + + skb_queue_walk_safe(&bus->glom, cur, next) { + skb_unlink(cur, &bus->glom); + brcmu_pkt_buf_free_skb(cur); + } +} + +/** + * brcmfmac sdio bus specific header + * This is the lowest layer header wrapped on the packets transmitted between + * host and WiFi dongle which contains information needed for SDIO core and + * firmware + * + * It consists of 3 parts: hardware header, hardware extension header and + * software header + * hardware header (frame tag) - 4 bytes + * Byte 0~1: Frame length + * Byte 2~3: Checksum, bit-wise inverse of frame length + * hardware extension header - 8 bytes + * Tx glom mode only, N/A for Rx or normal Tx + * Byte 0~1: Packet length excluding hw frame tag + * Byte 2: Reserved + * Byte 3: Frame flags, bit 0: last frame indication + * Byte 4~5: Reserved + * Byte 6~7: Tail padding length + * software header - 8 bytes + * Byte 0: Rx/Tx sequence number + * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag + * Byte 2: Length of next data frame, reserved for Tx + * Byte 3: Data offset + * Byte 4: Flow control bits, reserved for Tx + * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet + * Byte 6~7: Reserved + */ +#define SDPCM_HWHDR_LEN 4 +#define SDPCM_HWEXT_LEN 8 +#define SDPCM_SWHDR_LEN 8 +#define SDPCM_HDRLEN (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN) +/* software header */ +#define SDPCM_SEQ_MASK 0x000000ff +#define SDPCM_SEQ_WRAP 256 +#define SDPCM_CHANNEL_MASK 0x00000f00 +#define SDPCM_CHANNEL_SHIFT 8 +#define SDPCM_CONTROL_CHANNEL 0 /* Control */ +#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication */ +#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv */ +#define SDPCM_GLOM_CHANNEL 3 /* Coalesced packets */ +#define SDPCM_TEST_CHANNEL 15 /* Test/debug packets */ +#define SDPCM_GLOMDESC(p) (((u8 *)p)[1] & 0x80) +#define SDPCM_NEXTLEN_MASK 0x00ff0000 +#define SDPCM_NEXTLEN_SHIFT 16 +#define SDPCM_DOFFSET_MASK 0xff000000 +#define SDPCM_DOFFSET_SHIFT 24 +#define SDPCM_FCMASK_MASK 0x000000ff +#define SDPCM_WINDOW_MASK 0x0000ff00 +#define SDPCM_WINDOW_SHIFT 8 + +static inline u8 brcmf_sdio_getdatoffset(u8 *swheader) +{ + u32 hdrvalue; + hdrvalue = *(u32 *)swheader; + return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT); +} + +static inline bool brcmf_sdio_fromevntchan(u8 *swheader) +{ + u32 hdrvalue; + u8 ret; + + hdrvalue = *(u32 *)swheader; + ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT); + + return (ret == SDPCM_EVENT_CHANNEL); +} + +static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header, + struct brcmf_sdio_hdrinfo *rd, + enum brcmf_sdio_frmtype type) +{ + u16 len, checksum; + u8 rx_seq, fc, tx_seq_max; + u32 swheader; + + trace_brcmf_sdpcm_hdr(SDPCM_RX, header); + + /* hw header */ + len = get_unaligned_le16(header); + checksum = get_unaligned_le16(header + sizeof(u16)); + /* All zero means no more to read */ + if (!(len | checksum)) { + bus->rxpending = false; + return -ENODATA; + } + if ((u16)(~(len ^ checksum))) { + brcmf_err("HW header checksum error\n"); + bus->sdcnt.rx_badhdr++; + brcmf_sdio_rxfail(bus, false, false); + return -EIO; + } + if (len < SDPCM_HDRLEN) { + brcmf_err("HW header length error\n"); + return -EPROTO; + } + if (type == BRCMF_SDIO_FT_SUPER && + (roundup(len, bus->blocksize) != rd->len)) { + brcmf_err("HW superframe header length error\n"); + return -EPROTO; + } + if (type == BRCMF_SDIO_FT_SUB && len > rd->len) { + brcmf_err("HW subframe header length error\n"); + return -EPROTO; + } + rd->len = len; + + /* software header */ + header += SDPCM_HWHDR_LEN; + swheader = le32_to_cpu(*(__le32 *)header); + if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) { + brcmf_err("Glom descriptor found in superframe head\n"); + rd->len = 0; + return -EINVAL; + } + rx_seq = (u8)(swheader & SDPCM_SEQ_MASK); + rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT; + if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL && + type != BRCMF_SDIO_FT_SUPER) { + brcmf_err("HW header length too long\n"); + bus->sdcnt.rx_toolong++; + brcmf_sdio_rxfail(bus, false, false); + rd->len = 0; + return -EPROTO; + } + if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) { + brcmf_err("Wrong channel for superframe\n"); + rd->len = 0; + return -EINVAL; + } + if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL && + rd->channel != SDPCM_EVENT_CHANNEL) { + brcmf_err("Wrong channel for subframe\n"); + rd->len = 0; + return -EINVAL; + } + rd->dat_offset = brcmf_sdio_getdatoffset(header); + if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) { + brcmf_err("seq %d: bad data offset\n", rx_seq); + bus->sdcnt.rx_badhdr++; + brcmf_sdio_rxfail(bus, false, false); + rd->len = 0; + return -ENXIO; + } + if (rd->seq_num != rx_seq) { + brcmf_dbg(SDIO, "seq %d, expected %d\n", rx_seq, rd->seq_num); + bus->sdcnt.rx_badseq++; + rd->seq_num = rx_seq; + } + /* no need to check the reset for subframe */ + if (type == BRCMF_SDIO_FT_SUB) + return 0; + rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT; + if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) { + /* only warm for NON glom packet */ + if (rd->channel != SDPCM_GLOM_CHANNEL) + brcmf_err("seq %d: next length error\n", rx_seq); + rd->len_nxtfrm = 0; + } + swheader = le32_to_cpu(*(__le32 *)(header + 4)); + fc = swheader & SDPCM_FCMASK_MASK; + if (bus->flowcontrol != fc) { + if (~bus->flowcontrol & fc) + bus->sdcnt.fc_xoff++; + if (bus->flowcontrol & ~fc) + bus->sdcnt.fc_xon++; + bus->sdcnt.fc_rcvd++; + bus->flowcontrol = fc; + } + tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT; + if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) { + brcmf_err("seq %d: max tx seq number error\n", rx_seq); + tx_seq_max = bus->tx_seq + 2; + } + bus->tx_max = tx_seq_max; + + return 0; +} + +static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length) +{ + *(__le16 *)header = cpu_to_le16(frm_length); + *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length); +} + +static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header, + struct brcmf_sdio_hdrinfo *hd_info) +{ + u32 hdrval; + u8 hdr_offset; + + brcmf_sdio_update_hwhdr(header, hd_info->len); + hdr_offset = SDPCM_HWHDR_LEN; + + if (bus->txglom) { + hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24); + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + hdrval = (u16)hd_info->tail_pad << 16; + *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval); + hdr_offset += SDPCM_HWEXT_LEN; + } + + hdrval = hd_info->seq_num; + hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) & + SDPCM_CHANNEL_MASK; + hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) & + SDPCM_DOFFSET_MASK; + *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval); + *(((__le32 *)(header + hdr_offset)) + 1) = 0; + trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header); +} + +static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq) +{ + u16 dlen, totlen; + u8 *dptr, num = 0; + u16 sublen; + struct sk_buff *pfirst, *pnext; + + int errcode; + u8 doff, sfdoff; + + struct brcmf_sdio_hdrinfo rd_new; + + /* If packets, issue read(s) and send up packet chain */ + /* Return sequence numbers consumed? */ + + brcmf_dbg(SDIO, "start: glomd %p glom %p\n", + bus->glomd, skb_peek(&bus->glom)); + + /* If there's a descriptor, generate the packet chain */ + if (bus->glomd) { + pfirst = pnext = NULL; + dlen = (u16) (bus->glomd->len); + dptr = bus->glomd->data; + if (!dlen || (dlen & 1)) { + brcmf_err("bad glomd len(%d), ignore descriptor\n", + dlen); + dlen = 0; + } + + for (totlen = num = 0; dlen; num++) { + /* Get (and move past) next length */ + sublen = get_unaligned_le16(dptr); + dlen -= sizeof(u16); + dptr += sizeof(u16); + if ((sublen < SDPCM_HDRLEN) || + ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) { + brcmf_err("descriptor len %d bad: %d\n", + num, sublen); + pnext = NULL; + break; + } + if (sublen % bus->sgentry_align) { + brcmf_err("sublen %d not multiple of %d\n", + sublen, bus->sgentry_align); + } + totlen += sublen; + + /* For last frame, adjust read len so total + is a block multiple */ + if (!dlen) { + sublen += + (roundup(totlen, bus->blocksize) - totlen); + totlen = roundup(totlen, bus->blocksize); + } + + /* Allocate/chain packet for next subframe */ + pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align); + if (pnext == NULL) { + brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n", + num, sublen); + break; + } + skb_queue_tail(&bus->glom, pnext); + + /* Adhere to start alignment requirements */ + pkt_align(pnext, sublen, bus->sgentry_align); + } + + /* If all allocations succeeded, save packet chain + in bus structure */ + if (pnext) { + brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n", + totlen, num); + if (BRCMF_GLOM_ON() && bus->cur_read.len && + totlen != bus->cur_read.len) { + brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n", + bus->cur_read.len, totlen, rxseq); + } + pfirst = pnext = NULL; + } else { + brcmf_sdio_free_glom(bus); + num = 0; + } + + /* Done with descriptor packet */ + brcmu_pkt_buf_free_skb(bus->glomd); + bus->glomd = NULL; + bus->cur_read.len = 0; + } + + /* Ok -- either we just generated a packet chain, + or had one from before */ + if (!skb_queue_empty(&bus->glom)) { + if (BRCMF_GLOM_ON()) { + brcmf_dbg(GLOM, "try superframe read, packet chain:\n"); + skb_queue_walk(&bus->glom, pnext) { + brcmf_dbg(GLOM, " %p: %p len 0x%04x (%d)\n", + pnext, (u8 *) (pnext->data), + pnext->len, pnext->len); + } + } + + pfirst = skb_peek(&bus->glom); + dlen = (u16) brcmf_sdio_glom_len(bus); + + /* Do an SDIO read for the superframe. Configurable iovar to + * read directly into the chained packet, or allocate a large + * packet and and copy into the chain. + */ + sdio_claim_host(bus->sdiodev->func1); + errcode = brcmf_sdiod_recv_chain(bus->sdiodev, + &bus->glom, dlen); + sdio_release_host(bus->sdiodev->func1); + bus->sdcnt.f2rxdata++; + + /* On failure, kill the superframe */ + if (errcode < 0) { + brcmf_err("glom read of %d bytes failed: %d\n", + dlen, errcode); + + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_rxfail(bus, true, false); + bus->sdcnt.rxglomfail++; + brcmf_sdio_free_glom(bus); + sdio_release_host(bus->sdiodev->func1); + return 0; + } + + brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), + pfirst->data, min_t(int, pfirst->len, 48), + "SUPERFRAME:\n"); + + rd_new.seq_num = rxseq; + rd_new.len = dlen; + sdio_claim_host(bus->sdiodev->func1); + errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new, + BRCMF_SDIO_FT_SUPER); + sdio_release_host(bus->sdiodev->func1); + bus->cur_read.len = rd_new.len_nxtfrm << 4; + + /* Remove superframe header, remember offset */ + skb_pull(pfirst, rd_new.dat_offset); + sfdoff = rd_new.dat_offset; + num = 0; + + /* Validate all the subframe headers */ + skb_queue_walk(&bus->glom, pnext) { + /* leave when invalid subframe is found */ + if (errcode) + break; + + rd_new.len = pnext->len; + rd_new.seq_num = rxseq++; + sdio_claim_host(bus->sdiodev->func1); + errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new, + BRCMF_SDIO_FT_SUB); + sdio_release_host(bus->sdiodev->func1); + brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), + pnext->data, 32, "subframe:\n"); + + num++; + } + + if (errcode) { + /* Terminate frame on error */ + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_rxfail(bus, true, false); + bus->sdcnt.rxglomfail++; + brcmf_sdio_free_glom(bus); + sdio_release_host(bus->sdiodev->func1); + bus->cur_read.len = 0; + return 0; + } + + /* Basic SD framing looks ok - process each packet (header) */ + + skb_queue_walk_safe(&bus->glom, pfirst, pnext) { + dptr = (u8 *) (pfirst->data); + sublen = get_unaligned_le16(dptr); + doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]); + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(), + dptr, pfirst->len, + "Rx Subframe Data:\n"); + + __skb_trim(pfirst, sublen); + skb_pull(pfirst, doff); + + if (pfirst->len == 0) { + skb_unlink(pfirst, &bus->glom); + brcmu_pkt_buf_free_skb(pfirst); + continue; + } + + brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), + pfirst->data, + min_t(int, pfirst->len, 32), + "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n", + bus->glom.qlen, pfirst, pfirst->data, + pfirst->len, pfirst->next, + pfirst->prev); + skb_unlink(pfirst, &bus->glom); + if (brcmf_sdio_fromevntchan(&dptr[SDPCM_HWHDR_LEN])) + brcmf_rx_event(bus->sdiodev->dev, pfirst); + else + brcmf_rx_frame(bus->sdiodev->dev, pfirst, + false); + bus->sdcnt.rxglompkts++; + } + + bus->sdcnt.rxglomframes++; + } + return num; +} + +static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition, + bool *pending) +{ + DECLARE_WAITQUEUE(wait, current); + int timeout = DCMD_RESP_TIMEOUT; + + /* Wait until control frame is available */ + add_wait_queue(&bus->dcmd_resp_wait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + while (!(*condition) && (!signal_pending(current) && timeout)) + timeout = schedule_timeout(timeout); + + if (signal_pending(current)) + *pending = true; + + set_current_state(TASK_RUNNING); + remove_wait_queue(&bus->dcmd_resp_wait, &wait); + + return timeout; +} + +static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus) +{ + wake_up_interruptible(&bus->dcmd_resp_wait); + + return 0; +} +static void +brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff) +{ + uint rdlen, pad; + u8 *buf = NULL, *rbuf; + int sdret; + + brcmf_dbg(SDIO, "Enter\n"); + if (bus->rxblen) + buf = vzalloc(bus->rxblen); + if (!buf) + goto done; + + rbuf = bus->rxbuf; + pad = ((unsigned long)rbuf % bus->head_align); + if (pad) + rbuf += (bus->head_align - pad); + + /* Copy the already-read portion over */ + memcpy(buf, hdr, BRCMF_FIRSTREAD); + if (len <= BRCMF_FIRSTREAD) + goto gotpkt; + + /* Raise rdlen to next SDIO block to avoid tail command */ + rdlen = len - BRCMF_FIRSTREAD; + if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) { + pad = bus->blocksize - (rdlen % bus->blocksize); + if ((pad <= bus->roundup) && (pad < bus->blocksize) && + ((len + pad) < bus->sdiodev->bus_if->maxctl)) + rdlen += pad; + } else if (rdlen % bus->head_align) { + rdlen += bus->head_align - (rdlen % bus->head_align); + } + + /* Drop if the read is too big or it exceeds our maximum */ + if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) { + brcmf_err("%d-byte control read exceeds %d-byte buffer\n", + rdlen, bus->sdiodev->bus_if->maxctl); + brcmf_sdio_rxfail(bus, false, false); + goto done; + } + + if ((len - doff) > bus->sdiodev->bus_if->maxctl) { + brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n", + len, len - doff, bus->sdiodev->bus_if->maxctl); + bus->sdcnt.rx_toolong++; + brcmf_sdio_rxfail(bus, false, false); + goto done; + } + + /* Read remain of frame body */ + sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen); + bus->sdcnt.f2rxdata++; + + /* Control frame failures need retransmission */ + if (sdret < 0) { + brcmf_err("read %d control bytes failed: %d\n", + rdlen, sdret); + bus->sdcnt.rxc_errors++; + brcmf_sdio_rxfail(bus, true, true); + goto done; + } else + memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen); + +gotpkt: + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), + buf, len, "RxCtrl:\n"); + + /* Point to valid data and indicate its length */ + spin_lock_bh(&bus->rxctl_lock); + if (bus->rxctl) { + brcmf_err("last control frame is being processed.\n"); + spin_unlock_bh(&bus->rxctl_lock); + vfree(buf); + goto done; + } + bus->rxctl = buf + doff; + bus->rxctl_orig = buf; + bus->rxlen = len - doff; + spin_unlock_bh(&bus->rxctl_lock); + +done: + /* Awake any waiters */ + brcmf_sdio_dcmd_resp_wake(bus); +} + +/* Pad read to blocksize for efficiency */ +static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) +{ + if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) { + *pad = bus->blocksize - (*rdlen % bus->blocksize); + if (*pad <= bus->roundup && *pad < bus->blocksize && + *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ) + *rdlen += *pad; + } else if (*rdlen % bus->head_align) { + *rdlen += bus->head_align - (*rdlen % bus->head_align); + } +} + +static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) +{ + struct sk_buff *pkt; /* Packet for event or data frames */ + u16 pad; /* Number of pad bytes to read */ + uint rxleft = 0; /* Remaining number of frames allowed */ + int ret; /* Return code from calls */ + uint rxcount = 0; /* Total frames read */ + struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new; + u8 head_read = 0; + + brcmf_dbg(SDIO, "Enter\n"); + + /* Not finished unless we encounter no more frames indication */ + bus->rxpending = true; + + for (rd->seq_num = bus->rx_seq, rxleft = maxframes; + !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_SDIOD_DATA; + rd->seq_num++, rxleft--) { + + /* Handle glomming separately */ + if (bus->glomd || !skb_queue_empty(&bus->glom)) { + u8 cnt; + brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n", + bus->glomd, skb_peek(&bus->glom)); + cnt = brcmf_sdio_rxglom(bus, rd->seq_num); + brcmf_dbg(GLOM, "rxglom returned %d\n", cnt); + rd->seq_num += cnt - 1; + rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1; + continue; + } + + rd->len_left = rd->len; + /* read header first for unknow frame length */ + sdio_claim_host(bus->sdiodev->func1); + if (!rd->len) { + ret = brcmf_sdiod_recv_buf(bus->sdiodev, + bus->rxhdr, BRCMF_FIRSTREAD); + bus->sdcnt.f2rxhdrs++; + if (ret < 0) { + brcmf_err("RXHEADER FAILED: %d\n", + ret); + bus->sdcnt.rx_hdrfail++; + brcmf_sdio_rxfail(bus, true, true); + sdio_release_host(bus->sdiodev->func1); + continue; + } + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(), + bus->rxhdr, SDPCM_HDRLEN, + "RxHdr:\n"); + + if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd, + BRCMF_SDIO_FT_NORMAL)) { + sdio_release_host(bus->sdiodev->func1); + if (!bus->rxpending) + break; + else + continue; + } + + if (rd->channel == SDPCM_CONTROL_CHANNEL) { + brcmf_sdio_read_control(bus, bus->rxhdr, + rd->len, + rd->dat_offset); + /* prepare the descriptor for the next read */ + rd->len = rd->len_nxtfrm << 4; + rd->len_nxtfrm = 0; + /* treat all packet as event if we don't know */ + rd->channel = SDPCM_EVENT_CHANNEL; + sdio_release_host(bus->sdiodev->func1); + continue; + } + rd->len_left = rd->len > BRCMF_FIRSTREAD ? + rd->len - BRCMF_FIRSTREAD : 0; + head_read = BRCMF_FIRSTREAD; + } + + brcmf_sdio_pad(bus, &pad, &rd->len_left); + + pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read + + bus->head_align); + if (!pkt) { + /* Give up on data, request rtx of events */ + brcmf_err("brcmu_pkt_buf_get_skb failed\n"); + brcmf_sdio_rxfail(bus, false, + RETRYCHAN(rd->channel)); + sdio_release_host(bus->sdiodev->func1); + continue; + } + skb_pull(pkt, head_read); + pkt_align(pkt, rd->len_left, bus->head_align); + + ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt); + bus->sdcnt.f2rxdata++; + sdio_release_host(bus->sdiodev->func1); + + if (ret < 0) { + brcmf_err("read %d bytes from channel %d failed: %d\n", + rd->len, rd->channel, ret); + brcmu_pkt_buf_free_skb(pkt); + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_rxfail(bus, true, + RETRYCHAN(rd->channel)); + sdio_release_host(bus->sdiodev->func1); + continue; + } + + if (head_read) { + skb_push(pkt, head_read); + memcpy(pkt->data, bus->rxhdr, head_read); + head_read = 0; + } else { + memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN); + rd_new.seq_num = rd->seq_num; + sdio_claim_host(bus->sdiodev->func1); + if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new, + BRCMF_SDIO_FT_NORMAL)) { + rd->len = 0; + brcmf_sdio_rxfail(bus, true, true); + sdio_release_host(bus->sdiodev->func1); + brcmu_pkt_buf_free_skb(pkt); + continue; + } + bus->sdcnt.rx_readahead_cnt++; + if (rd->len != roundup(rd_new.len, 16)) { + brcmf_err("frame length mismatch:read %d, should be %d\n", + rd->len, + roundup(rd_new.len, 16) >> 4); + rd->len = 0; + brcmf_sdio_rxfail(bus, true, true); + sdio_release_host(bus->sdiodev->func1); + brcmu_pkt_buf_free_skb(pkt); + continue; + } + sdio_release_host(bus->sdiodev->func1); + rd->len_nxtfrm = rd_new.len_nxtfrm; + rd->channel = rd_new.channel; + rd->dat_offset = rd_new.dat_offset; + + brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && + BRCMF_DATA_ON()) && + BRCMF_HDRS_ON(), + bus->rxhdr, SDPCM_HDRLEN, + "RxHdr:\n"); + + if (rd_new.channel == SDPCM_CONTROL_CHANNEL) { + brcmf_err("readahead on control packet %d?\n", + rd_new.seq_num); + /* Force retry w/normal header read */ + rd->len = 0; + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_rxfail(bus, false, true); + sdio_release_host(bus->sdiodev->func1); + brcmu_pkt_buf_free_skb(pkt); + continue; + } + } + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(), + pkt->data, rd->len, "Rx Data:\n"); + + /* Save superframe descriptor and allocate packet frame */ + if (rd->channel == SDPCM_GLOM_CHANNEL) { + if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) { + brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n", + rd->len); + brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), + pkt->data, rd->len, + "Glom Data:\n"); + __skb_trim(pkt, rd->len); + skb_pull(pkt, SDPCM_HDRLEN); + bus->glomd = pkt; + } else { + brcmf_err("%s: glom superframe w/o " + "descriptor!\n", __func__); + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_rxfail(bus, false, false); + sdio_release_host(bus->sdiodev->func1); + } + /* prepare the descriptor for the next read */ + rd->len = rd->len_nxtfrm << 4; + rd->len_nxtfrm = 0; + /* treat all packet as event if we don't know */ + rd->channel = SDPCM_EVENT_CHANNEL; + continue; + } + + /* Fill in packet len and prio, deliver upward */ + __skb_trim(pkt, rd->len); + skb_pull(pkt, rd->dat_offset); + + if (pkt->len == 0) + brcmu_pkt_buf_free_skb(pkt); + else if (rd->channel == SDPCM_EVENT_CHANNEL) + brcmf_rx_event(bus->sdiodev->dev, pkt); + else + brcmf_rx_frame(bus->sdiodev->dev, pkt, + false); + + /* prepare the descriptor for the next read */ + rd->len = rd->len_nxtfrm << 4; + rd->len_nxtfrm = 0; + /* treat all packet as event if we don't know */ + rd->channel = SDPCM_EVENT_CHANNEL; + } + + rxcount = maxframes - rxleft; + /* Message if we hit the limit */ + if (!rxleft) + brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes); + else + brcmf_dbg(DATA, "processed %d frames\n", rxcount); + /* Back off rxseq if awaiting rtx, update rx_seq */ + if (bus->rxskip) + rd->seq_num--; + bus->rx_seq = rd->seq_num; + + return rxcount; +} + +static void +brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus) +{ + wake_up_interruptible(&bus->ctrl_wait); + return; +} + +static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) +{ + struct brcmf_bus_stats *stats; + u16 head_pad; + u8 *dat_buf; + + dat_buf = (u8 *)(pkt->data); + + /* Check head padding */ + head_pad = ((unsigned long)dat_buf % bus->head_align); + if (head_pad) { + if (skb_headroom(pkt) < head_pad) { + stats = &bus->sdiodev->bus_if->stats; + atomic_inc(&stats->pktcowed); + if (skb_cow_head(pkt, head_pad)) { + atomic_inc(&stats->pktcow_failed); + return -ENOMEM; + } + head_pad = 0; + } + skb_push(pkt, head_pad); + dat_buf = (u8 *)(pkt->data); + } + memset(dat_buf, 0, head_pad + bus->tx_hdrlen); + return head_pad; +} + +/* + * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for + * bus layer usage. + */ +/* flag marking a dummy skb added for DMA alignment requirement */ +#define ALIGN_SKB_FLAG 0x8000 +/* bit mask of data length chopped from the previous packet */ +#define ALIGN_SKB_CHOP_LEN_MASK 0x7fff + +static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus, + struct sk_buff_head *pktq, + struct sk_buff *pkt, u16 total_len) +{ + struct brcmf_sdio_dev *sdiodev; + struct sk_buff *pkt_pad; + u16 tail_pad, tail_chop, chain_pad; + unsigned int blksize; + bool lastfrm; + int ntail, ret; + + sdiodev = bus->sdiodev; + blksize = sdiodev->func2->cur_blksize; + /* sg entry alignment should be a divisor of block size */ + WARN_ON(blksize % bus->sgentry_align); + + /* Check tail padding */ + lastfrm = skb_queue_is_last(pktq, pkt); + tail_pad = 0; + tail_chop = pkt->len % bus->sgentry_align; + if (tail_chop) + tail_pad = bus->sgentry_align - tail_chop; + chain_pad = (total_len + tail_pad) % blksize; + if (lastfrm && chain_pad) + tail_pad += blksize - chain_pad; + if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) { + pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop + + bus->head_align); + if (pkt_pad == NULL) + return -ENOMEM; + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad); + if (unlikely(ret < 0)) { + kfree_skb(pkt_pad); + return ret; + } + memcpy(pkt_pad->data, + pkt->data + pkt->len - tail_chop, + tail_chop); + *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop; + skb_trim(pkt, pkt->len - tail_chop); + skb_trim(pkt_pad, tail_pad + tail_chop); + __skb_queue_after(pktq, pkt, pkt_pad); + } else { + ntail = pkt->data_len + tail_pad - + (pkt->end - pkt->tail); + if (skb_cloned(pkt) || ntail > 0) + if (pskb_expand_head(pkt, 0, ntail, GFP_ATOMIC)) + return -ENOMEM; + if (skb_linearize(pkt)) + return -ENOMEM; + __skb_put(pkt, tail_pad); + } + + return tail_pad; +} + +/** + * brcmf_sdio_txpkt_prep - packet preparation for transmit + * @bus: brcmf_sdio structure pointer + * @pktq: packet list pointer + * @chan: virtual channel to transmit the packet + * + * Processes to be applied to the packet + * - Align data buffer pointer + * - Align data buffer length + * - Prepare header + * Return: negative value if there is error + */ +static int +brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, + uint chan) +{ + u16 head_pad, total_len; + struct sk_buff *pkt_next; + u8 txseq; + int ret; + struct brcmf_sdio_hdrinfo hd_info = {0}; + + txseq = bus->tx_seq; + total_len = 0; + skb_queue_walk(pktq, pkt_next) { + /* alignment packet inserted in previous + * loop cycle can be skipped as it is + * already properly aligned and does not + * need an sdpcm header. + */ + if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG) + continue; + + /* align packet data pointer */ + ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next); + if (ret < 0) + return ret; + head_pad = (u16)ret; + if (head_pad) + memset(pkt_next->data + bus->tx_hdrlen, 0, head_pad); + + total_len += pkt_next->len; + + hd_info.len = pkt_next->len; + hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next); + if (bus->txglom && pktq->qlen > 1) { + ret = brcmf_sdio_txpkt_prep_sg(bus, pktq, + pkt_next, total_len); + if (ret < 0) + return ret; + hd_info.tail_pad = (u16)ret; + total_len += (u16)ret; + } + + hd_info.channel = chan; + hd_info.dat_offset = head_pad + bus->tx_hdrlen; + hd_info.seq_num = txseq++; + + /* Now fill the header */ + brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info); + + if (BRCMF_BYTES_ON() && + ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) || + (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL))) + brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len, + "Tx Frame:\n"); + else if (BRCMF_HDRS_ON()) + brcmf_dbg_hex_dump(true, pkt_next->data, + head_pad + bus->tx_hdrlen, + "Tx Header:\n"); + } + /* Hardware length tag of the first packet should be total + * length of the chain (including padding) + */ + if (bus->txglom) + brcmf_sdio_update_hwhdr(pktq->next->data, total_len); + return 0; +} + +/** + * brcmf_sdio_txpkt_postp - packet post processing for transmit + * @bus: brcmf_sdio structure pointer + * @pktq: packet list pointer + * + * Processes to be applied to the packet + * - Remove head padding + * - Remove tail padding + */ +static void +brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) +{ + u8 *hdr; + u32 dat_offset; + u16 tail_pad; + u16 dummy_flags, chop_len; + struct sk_buff *pkt_next, *tmp, *pkt_prev; + + skb_queue_walk_safe(pktq, pkt_next, tmp) { + dummy_flags = *(u16 *)(pkt_next->cb); + if (dummy_flags & ALIGN_SKB_FLAG) { + chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; + if (chop_len) { + pkt_prev = pkt_next->prev; + skb_put(pkt_prev, chop_len); + } + __skb_unlink(pkt_next, pktq); + brcmu_pkt_buf_free_skb(pkt_next); + } else { + hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN; + dat_offset = le32_to_cpu(*(__le32 *)hdr); + dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >> + SDPCM_DOFFSET_SHIFT; + skb_pull(pkt_next, dat_offset); + if (bus->txglom) { + tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2)); + skb_trim(pkt_next, pkt_next->len - tail_pad); + } + } + } +} + +/* Writes a HW/SW header into the packet and sends it. */ +/* Assumes: (a) header space already there, (b) caller holds lock */ +static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq, + uint chan) +{ + int ret; + struct sk_buff *pkt_next, *tmp; + + brcmf_dbg(TRACE, "Enter\n"); + + ret = brcmf_sdio_txpkt_prep(bus, pktq, chan); + if (ret) + goto done; + + sdio_claim_host(bus->sdiodev->func1); + ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq); + bus->sdcnt.f2txdata++; + + if (ret < 0) + brcmf_sdio_txfail(bus); + + sdio_release_host(bus->sdiodev->func1); + +done: + brcmf_sdio_txpkt_postp(bus, pktq); + if (ret == 0) + bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; + skb_queue_walk_safe(pktq, pkt_next, tmp) { + __skb_unlink(pkt_next, pktq); + brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next, + ret == 0); + } + return ret; +} + +static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes) +{ + struct sk_buff *pkt; + struct sk_buff_head pktq; + u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus); + u32 intstatus = 0; + int ret = 0, prec_out, i; + uint cnt = 0; + u8 tx_prec_map, pkt_num; + + brcmf_dbg(TRACE, "Enter\n"); + + tx_prec_map = ~bus->flowcontrol; + + /* Send frames until the limit or some other event */ + for (cnt = 0; (cnt < maxframes) && data_ok(bus);) { + pkt_num = 1; + if (bus->txglom) + pkt_num = min_t(u8, bus->tx_max - bus->tx_seq, + bus->sdiodev->txglomsz); + pkt_num = min_t(u32, pkt_num, + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)); + __skb_queue_head_init(&pktq); + spin_lock_bh(&bus->txq_lock); + for (i = 0; i < pkt_num; i++) { + pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, + &prec_out); + if (pkt == NULL) + break; + __skb_queue_tail(&pktq, pkt); + } + spin_unlock_bh(&bus->txq_lock); + if (i == 0) + break; + + ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL); + + cnt += i; + + /* In poll mode, need to check for other events */ + if (!bus->intr) { + /* Check device status, signal pending interrupt */ + sdio_claim_host(bus->sdiodev->func1); + intstatus = brcmf_sdiod_readl(bus->sdiodev, + intstat_addr, &ret); + sdio_release_host(bus->sdiodev->func1); + + bus->sdcnt.f2txdata++; + if (ret != 0) + break; + if (intstatus & bus->hostintmask) + atomic_set(&bus->ipend, 1); + } + } + + /* Deflow-control stack if needed */ + if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) && + bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { + bus->txoff = false; + brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false); + } + + return cnt; +} + +static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len) +{ + u8 doff; + u16 pad; + uint retries = 0; + struct brcmf_sdio_hdrinfo hd_info = {0}; + int ret; + + brcmf_dbg(SDIO, "Enter\n"); + + /* Back the pointer to make room for bus header */ + frame -= bus->tx_hdrlen; + len += bus->tx_hdrlen; + + /* Add alignment padding (optional for ctl frames) */ + doff = ((unsigned long)frame % bus->head_align); + if (doff) { + frame -= doff; + len += doff; + memset(frame + bus->tx_hdrlen, 0, doff); + } + + /* Round send length to next SDIO block */ + pad = 0; + if (bus->roundup && bus->blocksize && (len > bus->blocksize)) { + pad = bus->blocksize - (len % bus->blocksize); + if ((pad > bus->roundup) || (pad >= bus->blocksize)) + pad = 0; + } else if (len % bus->head_align) { + pad = bus->head_align - (len % bus->head_align); + } + len += pad; + + hd_info.len = len - pad; + hd_info.channel = SDPCM_CONTROL_CHANNEL; + hd_info.dat_offset = doff + bus->tx_hdrlen; + hd_info.seq_num = bus->tx_seq; + hd_info.lastfrm = true; + hd_info.tail_pad = pad; + brcmf_sdio_hdpack(bus, frame, &hd_info); + + if (bus->txglom) + brcmf_sdio_update_hwhdr(frame, len); + + brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(), + frame, len, "Tx Frame:\n"); + brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) && + BRCMF_HDRS_ON(), + frame, min_t(u16, len, 16), "TxHdr:\n"); + + do { + ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len); + + if (ret < 0) + brcmf_sdio_txfail(bus); + else + bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP; + } while (ret < 0 && retries++ < TXRETRIES); + + return ret; +} + +static void brcmf_sdio_bus_stop(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + struct brcmf_core *core = bus->sdio_core; + u32 local_hostintmask; + u8 saveclk; + int err; + + brcmf_dbg(TRACE, "Enter\n"); + + if (bus->watchdog_tsk) { + send_sig(SIGTERM, bus->watchdog_tsk, 1); + kthread_stop(bus->watchdog_tsk); + bus->watchdog_tsk = NULL; + } + + if (sdiodev->state != BRCMF_SDIOD_NOMEDIUM) { + sdio_claim_host(sdiodev->func1); + + /* Enable clock for device interrupts */ + brcmf_sdio_bus_sleep(bus, false, false); + + /* Disable and clear interrupts at the chip level also */ + brcmf_sdiod_writel(sdiodev, core->base + SD_REG(hostintmask), + 0, NULL); + + local_hostintmask = bus->hostintmask; + bus->hostintmask = 0; + + /* Force backplane clocks to assure F2 interrupt propagates */ + saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + &err); + if (!err) + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + if (err) + brcmf_err("Failed to force clock for F2: err %d\n", + err); + + /* Turn off the bus (F2), free any pending packets */ + brcmf_dbg(INTR, "disable SDIO interrupts\n"); + sdio_disable_func(sdiodev->func2); + + /* Clear any pending interrupts now that F2 is disabled */ + brcmf_sdiod_writel(sdiodev, core->base + SD_REG(intstatus), + local_hostintmask, NULL); + + sdio_release_host(sdiodev->func1); + } + /* Clear the data packet queues */ + brcmu_pktq_flush(&bus->txq, true, NULL, NULL); + + /* Clear any held glomming stuff */ + brcmu_pkt_buf_free_skb(bus->glomd); + brcmf_sdio_free_glom(bus); + + /* Clear rx control and wake any waiters */ + spin_lock_bh(&bus->rxctl_lock); + bus->rxlen = 0; + spin_unlock_bh(&bus->rxctl_lock); + brcmf_sdio_dcmd_resp_wake(bus); + + /* Reset some F2 state stuff */ + bus->rxskip = false; + bus->tx_seq = bus->rx_seq = 0; +} + +static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiodev; + unsigned long flags; + + sdiodev = bus->sdiodev; + if (sdiodev->oob_irq_requested) { + spin_lock_irqsave(&sdiodev->irq_en_lock, flags); + if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) { + enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr); + sdiodev->irq_en = true; + } + spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags); + } +} + +static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus) +{ + struct brcmf_core *core = bus->sdio_core; + u32 addr; + unsigned long val; + int ret; + + addr = core->base + SD_REG(intstatus); + + val = brcmf_sdiod_readl(bus->sdiodev, addr, &ret); + bus->sdcnt.f1regdata++; + if (ret != 0) + return ret; + + val &= bus->hostintmask; + atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE)); + + /* Clear interrupts */ + if (val) { + brcmf_sdiod_writel(bus->sdiodev, addr, val, &ret); + bus->sdcnt.f1regdata++; + atomic_or(val, &bus->intstatus); + } + + return ret; +} + +static void brcmf_sdio_dpc(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiod = bus->sdiodev; + u32 newstatus = 0; + u32 intstat_addr = bus->sdio_core->base + SD_REG(intstatus); + unsigned long intstatus; + uint txlimit = bus->txbound; /* Tx frames to send before resched */ + uint framecnt; /* Temporary counter of tx/rx frames */ + int err = 0; + + brcmf_dbg(SDIO, "Enter\n"); + + sdio_claim_host(bus->sdiodev->func1); + + /* If waiting for HTAVAIL, check status */ + if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) { + u8 clkctl, devctl = 0; + +#ifdef DEBUG + /* Check for inconsistent device control */ + devctl = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_DEVICE_CTL, + &err); +#endif /* DEBUG */ + + /* Read CSR, if clock on switch to AVAIL, else ignore */ + clkctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_FUNC1_CHIPCLKCSR, &err); + + brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", + devctl, clkctl); + + if (SBSDIO_HTAV(clkctl)) { + devctl = brcmf_sdiod_readb(bus->sdiodev, + SBSDIO_DEVICE_CTL, &err); + devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY; + brcmf_sdiod_writeb(bus->sdiodev, + SBSDIO_DEVICE_CTL, devctl, &err); + bus->clkstate = CLK_AVAIL; + } + } + + /* Make sure backplane clock is on */ + brcmf_sdio_bus_sleep(bus, false, true); + + /* Pending interrupt indicates new device status */ + if (atomic_read(&bus->ipend) > 0) { + atomic_set(&bus->ipend, 0); + err = brcmf_sdio_intr_rstatus(bus); + } + + /* Start with leftover status bits */ + intstatus = atomic_xchg(&bus->intstatus, 0); + + /* Handle flow-control change: read new state in case our ack + * crossed another change interrupt. If change still set, assume + * FC ON for safety, let next loop through do the debounce. + */ + if (intstatus & I_HMB_FC_CHANGE) { + intstatus &= ~I_HMB_FC_CHANGE; + brcmf_sdiod_writel(sdiod, intstat_addr, I_HMB_FC_CHANGE, &err); + + newstatus = brcmf_sdiod_readl(sdiod, intstat_addr, &err); + + bus->sdcnt.f1regdata += 2; + atomic_set(&bus->fcstate, + !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE))); + intstatus |= (newstatus & bus->hostintmask); + } + + /* Handle host mailbox indication */ + if (intstatus & I_HMB_HOST_INT) { + intstatus &= ~I_HMB_HOST_INT; + intstatus |= brcmf_sdio_hostmail(bus); + } + + sdio_release_host(bus->sdiodev->func1); + + /* Generally don't ask for these, can get CRC errors... */ + if (intstatus & I_WR_OOSYNC) { + brcmf_err("Dongle reports WR_OOSYNC\n"); + intstatus &= ~I_WR_OOSYNC; + } + + if (intstatus & I_RD_OOSYNC) { + brcmf_err("Dongle reports RD_OOSYNC\n"); + intstatus &= ~I_RD_OOSYNC; + } + + if (intstatus & I_SBINT) { + brcmf_err("Dongle reports SBINT\n"); + intstatus &= ~I_SBINT; + } + + /* Would be active due to wake-wlan in gSPI */ + if (intstatus & I_CHIPACTIVE) { + brcmf_dbg(SDIO, "Dongle reports CHIPACTIVE\n"); + intstatus &= ~I_CHIPACTIVE; + } + + /* Ignore frame indications if rxskip is set */ + if (bus->rxskip) + intstatus &= ~I_HMB_FRAME_IND; + + /* On frame indication, read available frames */ + if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) { + brcmf_sdio_readframes(bus, bus->rxbound); + if (!bus->rxpending) + intstatus &= ~I_HMB_FRAME_IND; + } + + /* Keep still-pending events for next scheduling */ + if (intstatus) + atomic_or(intstatus, &bus->intstatus); + + brcmf_sdio_clrintr(bus); + + if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) && + data_ok(bus)) { + sdio_claim_host(bus->sdiodev->func1); + if (bus->ctrl_frame_stat) { + err = brcmf_sdio_tx_ctrlframe(bus, bus->ctrl_frame_buf, + bus->ctrl_frame_len); + bus->ctrl_frame_err = err; + wmb(); + bus->ctrl_frame_stat = false; + } + sdio_release_host(bus->sdiodev->func1); + brcmf_sdio_wait_event_wakeup(bus); + } + /* Send queued frames (limit 1 if rx may still be pending) */ + if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) && + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && + data_ok(bus)) { + framecnt = bus->rxpending ? min(txlimit, bus->txminmax) : + txlimit; + brcmf_sdio_sendfromq(bus, framecnt); + } + + if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) { + brcmf_err("failed backplane access over SDIO, halting operation\n"); + atomic_set(&bus->intstatus, 0); + if (bus->ctrl_frame_stat) { + sdio_claim_host(bus->sdiodev->func1); + if (bus->ctrl_frame_stat) { + bus->ctrl_frame_err = -ENODEV; + wmb(); + bus->ctrl_frame_stat = false; + brcmf_sdio_wait_event_wakeup(bus); + } + sdio_release_host(bus->sdiodev->func1); + } + } else if (atomic_read(&bus->intstatus) || + atomic_read(&bus->ipend) > 0 || + (!atomic_read(&bus->fcstate) && + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && + data_ok(bus))) { + bus->dpc_triggered = true; + } +} + +static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + + return &bus->txq; +} + +static bool brcmf_sdio_prec_enq(struct pktq *q, struct sk_buff *pkt, int prec) +{ + struct sk_buff *p; + int eprec = -1; /* precedence to evict from */ + + /* Fast case, precedence queue is not full and we are also not + * exceeding total queue length + */ + if (!pktq_pfull(q, prec) && !pktq_full(q)) { + brcmu_pktq_penq(q, prec, pkt); + return true; + } + + /* Determine precedence from which to evict packet, if any */ + if (pktq_pfull(q, prec)) { + eprec = prec; + } else if (pktq_full(q)) { + p = brcmu_pktq_peek_tail(q, &eprec); + if (eprec > prec) + return false; + } + + /* Evict if needed */ + if (eprec >= 0) { + /* Detect queueing to unconfigured precedence */ + if (eprec == prec) + return false; /* refuse newer (incoming) packet */ + /* Evict packet according to discard policy */ + p = brcmu_pktq_pdeq_tail(q, eprec); + if (p == NULL) + brcmf_err("brcmu_pktq_pdeq_tail() failed\n"); + brcmu_pkt_buf_free_skb(p); + } + + /* Enqueue */ + p = brcmu_pktq_penq(q, prec, pkt); + if (p == NULL) + brcmf_err("brcmu_pktq_penq() failed\n"); + + return p != NULL; +} + +static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt) +{ + int ret = -EBADE; + uint prec; + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + + brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len); + if (sdiodev->state != BRCMF_SDIOD_DATA) + return -EIO; + + /* Add space for the header */ + skb_push(pkt, bus->tx_hdrlen); + /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */ + + prec = prio2prec((pkt->priority & PRIOMASK)); + + /* Check for existing queue, current flow-control, + pending event, or pending clock */ + brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq)); + bus->sdcnt.fcqueued++; + + /* Priority based enq */ + spin_lock_bh(&bus->txq_lock); + /* reset bus_flags in packet cb */ + *(u16 *)(pkt->cb) = 0; + if (!brcmf_sdio_prec_enq(&bus->txq, pkt, prec)) { + skb_pull(pkt, bus->tx_hdrlen); + brcmf_err("out of bus->txq !!!\n"); + ret = -ENOSR; + } else { + ret = 0; + } + + if (pktq_len(&bus->txq) >= TXHI) { + bus->txoff = true; + brcmf_proto_bcdc_txflowblock(dev, true); + } + spin_unlock_bh(&bus->txq_lock); + +#ifdef DEBUG + if (pktq_plen(&bus->txq, prec) > qcount[prec]) + qcount[prec] = pktq_plen(&bus->txq, prec); +#endif + + brcmf_sdio_trigger_dpc(bus); + return ret; +} + +#ifdef DEBUG +#define CONSOLE_LINE_MAX 192 + +static int brcmf_sdio_readconsole(struct brcmf_sdio *bus) +{ + struct brcmf_console *c = &bus->console; + u8 line[CONSOLE_LINE_MAX], ch; + u32 n, idx, addr; + int rv; + + /* Don't do anything until FWREADY updates console address */ + if (bus->console_addr == 0) + return 0; + + /* Read console log struct */ + addr = bus->console_addr + offsetof(struct rte_console, log_le); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le, + sizeof(c->log_le)); + if (rv < 0) + return rv; + + /* Allocate console buffer (one time only) */ + if (c->buf == NULL) { + c->bufsize = le32_to_cpu(c->log_le.buf_size); + c->buf = kmalloc(c->bufsize, GFP_ATOMIC); + if (c->buf == NULL) + return -ENOMEM; + } + + idx = le32_to_cpu(c->log_le.idx); + + /* Protect against corrupt value */ + if (idx > c->bufsize) + return -EBADE; + + /* Skip reading the console buffer if the index pointer + has not moved */ + if (idx == c->last) + return 0; + + /* Read the console buffer */ + addr = le32_to_cpu(c->log_le.buf); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize); + if (rv < 0) + return rv; + + while (c->last != idx) { + for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) { + if (c->last == idx) { + /* This would output a partial line. + * Instead, back up + * the buffer pointer and output this + * line next time around. + */ + if (c->last >= n) + c->last -= n; + else + c->last = c->bufsize - n; + goto break2; + } + ch = c->buf[c->last]; + c->last = (c->last + 1) % c->bufsize; + if (ch == '\n') + break; + line[n] = ch; + } + + if (n > 0) { + if (line[n - 1] == '\r') + n--; + line[n] = 0; + pr_debug("CONSOLE: %s\n", line); + } + } +break2: + + return 0; +} +#endif /* DEBUG */ + +static int +brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + int ret; + + brcmf_dbg(TRACE, "Enter\n"); + if (sdiodev->state != BRCMF_SDIOD_DATA) + return -EIO; + + /* Send from dpc */ + bus->ctrl_frame_buf = msg; + bus->ctrl_frame_len = msglen; + wmb(); + bus->ctrl_frame_stat = true; + + brcmf_sdio_trigger_dpc(bus); + wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat, + CTL_DONE_TIMEOUT); + ret = 0; + if (bus->ctrl_frame_stat) { + sdio_claim_host(bus->sdiodev->func1); + if (bus->ctrl_frame_stat) { + brcmf_dbg(SDIO, "ctrl_frame timeout\n"); + bus->ctrl_frame_stat = false; + ret = -ETIMEDOUT; + } + sdio_release_host(bus->sdiodev->func1); + } + if (!ret) { + brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n", + bus->ctrl_frame_err); + rmb(); + ret = bus->ctrl_frame_err; + } + + if (ret) + bus->sdcnt.tx_ctlerrs++; + else + bus->sdcnt.tx_ctlpkts++; + + return ret; +} + +#ifdef DEBUG +static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + u32 addr, console_ptr, console_size, console_index; + char *conbuf = NULL; + __le32 sh_val; + int rv; + + /* obtain console information from device memory */ + addr = sh->console_addr + offsetof(struct rte_console, log_le); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); + if (rv < 0) + return rv; + console_ptr = le32_to_cpu(sh_val); + + addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); + if (rv < 0) + return rv; + console_size = le32_to_cpu(sh_val); + + addr = sh->console_addr + offsetof(struct rte_console, log_le.idx); + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, + (u8 *)&sh_val, sizeof(u32)); + if (rv < 0) + return rv; + console_index = le32_to_cpu(sh_val); + + /* allocate buffer for console data */ + if (console_size <= CONSOLE_BUFFER_MAX) + conbuf = vzalloc(console_size+1); + + if (!conbuf) + return -ENOMEM; + + /* obtain the console data from device */ + conbuf[console_size] = '\0'; + rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf, + console_size); + if (rv < 0) + goto done; + + rv = seq_write(seq, conbuf + console_index, + console_size - console_index); + if (rv < 0) + goto done; + + if (console_index > 0) + rv = seq_write(seq, conbuf, console_index - 1); + +done: + vfree(conbuf); + return rv; +} + +static int brcmf_sdio_trap_info(struct seq_file *seq, struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + int error; + struct brcmf_trap_info tr; + + if ((sh->flags & SDPCM_SHARED_TRAP) == 0) { + brcmf_dbg(INFO, "no trap in firmware\n"); + return 0; + } + + error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr, + sizeof(struct brcmf_trap_info)); + if (error < 0) + return error; + + seq_printf(seq, + "dongle trap info: type 0x%x @ epc 0x%08x\n" + " cpsr 0x%08x spsr 0x%08x sp 0x%08x\n" + " lr 0x%08x pc 0x%08x offset 0x%x\n" + " r0 0x%08x r1 0x%08x r2 0x%08x r3 0x%08x\n" + " r4 0x%08x r5 0x%08x r6 0x%08x r7 0x%08x\n", + le32_to_cpu(tr.type), le32_to_cpu(tr.epc), + le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr), + le32_to_cpu(tr.r13), le32_to_cpu(tr.r14), + le32_to_cpu(tr.pc), sh->trap_addr, + le32_to_cpu(tr.r0), le32_to_cpu(tr.r1), + le32_to_cpu(tr.r2), le32_to_cpu(tr.r3), + le32_to_cpu(tr.r4), le32_to_cpu(tr.r5), + le32_to_cpu(tr.r6), le32_to_cpu(tr.r7)); + + return 0; +} + +static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus, + struct sdpcm_shared *sh) +{ + int error = 0; + char file[80] = "?"; + char expr[80] = ""; + + if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) { + brcmf_dbg(INFO, "firmware not built with -assert\n"); + return 0; + } else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) { + brcmf_dbg(INFO, "no assert in dongle\n"); + return 0; + } + + sdio_claim_host(bus->sdiodev->func1); + if (sh->assert_file_addr != 0) { + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_file_addr, (u8 *)file, 80); + if (error < 0) + return error; + } + if (sh->assert_exp_addr != 0) { + error = brcmf_sdiod_ramrw(bus->sdiodev, false, + sh->assert_exp_addr, (u8 *)expr, 80); + if (error < 0) + return error; + } + sdio_release_host(bus->sdiodev->func1); + + seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n", + file, sh->assert_line, expr); + return 0; +} + +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) +{ + int error; + struct sdpcm_shared sh; + + error = brcmf_sdio_readshared(bus, &sh); + + if (error < 0) + return error; + + if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0) + brcmf_dbg(INFO, "firmware not built with -assert\n"); + else if (sh.flags & SDPCM_SHARED_ASSERT) + brcmf_err("assertion in dongle\n"); + + if (sh.flags & SDPCM_SHARED_TRAP) + brcmf_err("firmware trap in dongle\n"); + + return 0; +} + +static int brcmf_sdio_died_dump(struct seq_file *seq, struct brcmf_sdio *bus) +{ + int error = 0; + struct sdpcm_shared sh; + + error = brcmf_sdio_readshared(bus, &sh); + if (error < 0) + goto done; + + error = brcmf_sdio_assert_info(seq, bus, &sh); + if (error < 0) + goto done; + + error = brcmf_sdio_trap_info(seq, bus, &sh); + if (error < 0) + goto done; + + error = brcmf_sdio_dump_console(seq, bus, &sh); + +done: + return error; +} + +static int brcmf_sdio_forensic_read(struct seq_file *seq, void *data) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(seq->private); + struct brcmf_sdio *bus = bus_if->bus_priv.sdio->bus; + + return brcmf_sdio_died_dump(seq, bus); +} + +static int brcmf_debugfs_sdio_count_read(struct seq_file *seq, void *data) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(seq->private); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio_count *sdcnt = &sdiodev->bus->sdcnt; + + seq_printf(seq, + "intrcount: %u\nlastintrs: %u\n" + "pollcnt: %u\nregfails: %u\n" + "tx_sderrs: %u\nfcqueued: %u\n" + "rxrtx: %u\nrx_toolong: %u\n" + "rxc_errors: %u\nrx_hdrfail: %u\n" + "rx_badhdr: %u\nrx_badseq: %u\n" + "fc_rcvd: %u\nfc_xoff: %u\n" + "fc_xon: %u\nrxglomfail: %u\n" + "rxglomframes: %u\nrxglompkts: %u\n" + "f2rxhdrs: %u\nf2rxdata: %u\n" + "f2txdata: %u\nf1regdata: %u\n" + "tickcnt: %u\ntx_ctlerrs: %lu\n" + "tx_ctlpkts: %lu\nrx_ctlerrs: %lu\n" + "rx_ctlpkts: %lu\nrx_readahead: %lu\n", + sdcnt->intrcount, sdcnt->lastintrs, + sdcnt->pollcnt, sdcnt->regfails, + sdcnt->tx_sderrs, sdcnt->fcqueued, + sdcnt->rxrtx, sdcnt->rx_toolong, + sdcnt->rxc_errors, sdcnt->rx_hdrfail, + sdcnt->rx_badhdr, sdcnt->rx_badseq, + sdcnt->fc_rcvd, sdcnt->fc_xoff, + sdcnt->fc_xon, sdcnt->rxglomfail, + sdcnt->rxglomframes, sdcnt->rxglompkts, + sdcnt->f2rxhdrs, sdcnt->f2rxdata, + sdcnt->f2txdata, sdcnt->f1regdata, + sdcnt->tickcnt, sdcnt->tx_ctlerrs, + sdcnt->tx_ctlpkts, sdcnt->rx_ctlerrs, + sdcnt->rx_ctlpkts, sdcnt->rx_readahead_cnt); + + return 0; +} + +static void brcmf_sdio_debugfs_create(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + struct dentry *dentry = brcmf_debugfs_get_devdir(drvr); + + if (IS_ERR_OR_NULL(dentry)) + return; + + bus->console_interval = BRCMF_CONSOLE; + + brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read); + brcmf_debugfs_add_entry(drvr, "counters", + brcmf_debugfs_sdio_count_read); + debugfs_create_u32("console_interval", 0644, dentry, + &bus->console_interval); +} +#else +static int brcmf_sdio_checkdied(struct brcmf_sdio *bus) +{ + return 0; +} + +static void brcmf_sdio_debugfs_create(struct device *dev) +{ +} +#endif /* DEBUG */ + +static int +brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen) +{ + int timeleft; + uint rxlen = 0; + bool pending; + u8 *buf; + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + + brcmf_dbg(TRACE, "Enter\n"); + if (sdiodev->state != BRCMF_SDIOD_DATA) + return -EIO; + + /* Wait until control frame is available */ + timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending); + + spin_lock_bh(&bus->rxctl_lock); + rxlen = bus->rxlen; + memcpy(msg, bus->rxctl, min(msglen, rxlen)); + bus->rxctl = NULL; + buf = bus->rxctl_orig; + bus->rxctl_orig = NULL; + bus->rxlen = 0; + spin_unlock_bh(&bus->rxctl_lock); + vfree(buf); + + if (rxlen) { + brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n", + rxlen, msglen); + } else if (timeleft == 0) { + brcmf_err("resumed on timeout\n"); + brcmf_sdio_checkdied(bus); + } else if (pending) { + brcmf_dbg(CTL, "cancelled\n"); + return -ERESTARTSYS; + } else { + brcmf_dbg(CTL, "resumed for unknown reason?\n"); + brcmf_sdio_checkdied(bus); + } + + if (rxlen) + bus->sdcnt.rx_ctlpkts++; + else + bus->sdcnt.rx_ctlerrs++; + + return rxlen ? (int)rxlen : -ETIMEDOUT; +} + +#ifdef DEBUG +static bool +brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, + u8 *ram_data, uint ram_sz) +{ + char *ram_cmp; + int err; + bool ret = true; + int address; + int offset; + int len; + + /* read back and verify */ + brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr, + ram_sz); + ram_cmp = kmalloc(MEMBLOCK, GFP_KERNEL); + /* do not proceed while no memory but */ + if (!ram_cmp) + return true; + + address = ram_addr; + offset = 0; + while (offset < ram_sz) { + len = ((offset + MEMBLOCK) < ram_sz) ? MEMBLOCK : + ram_sz - offset; + err = brcmf_sdiod_ramrw(sdiodev, false, address, ram_cmp, len); + if (err) { + brcmf_err("error %d on reading %d membytes at 0x%08x\n", + err, len, address); + ret = false; + break; + } else if (memcmp(ram_cmp, &ram_data[offset], len)) { + brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n", + offset, len); + ret = false; + break; + } + offset += len; + address += len; + } + + kfree(ram_cmp); + + return ret; +} +#else /* DEBUG */ +static bool +brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr, + u8 *ram_data, uint ram_sz) +{ + return true; +} +#endif /* DEBUG */ + +static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus, + const struct firmware *fw) +{ + int err; + + brcmf_dbg(TRACE, "Enter\n"); + + err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase, + (u8 *)fw->data, fw->size); + if (err) + brcmf_err("error %d on writing %d membytes at 0x%08x\n", + err, (int)fw->size, bus->ci->rambase); + else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase, + (u8 *)fw->data, fw->size)) + err = -EIO; + + return err; +} + +static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus, + void *vars, u32 varsz) +{ + int address; + int err; + + brcmf_dbg(TRACE, "Enter\n"); + + address = bus->ci->ramsize - varsz + bus->ci->rambase; + err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz); + if (err) + brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n", + err, varsz, address); + else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz)) + err = -EIO; + + return err; +} + +static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus, + const struct firmware *fw, + void *nvram, u32 nvlen) +{ + int bcmerror; + u32 rstvec; + + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + + rstvec = get_unaligned_le32(fw->data); + brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec); + + bcmerror = brcmf_sdio_download_code_file(bus, fw); + release_firmware(fw); + if (bcmerror) { + brcmf_err("dongle image file download failed\n"); + brcmf_fw_nvram_free(nvram); + goto err; + } + + bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen); + brcmf_fw_nvram_free(nvram); + if (bcmerror) { + brcmf_err("dongle nvram file download failed\n"); + goto err; + } + + /* Take arm out of reset */ + if (!brcmf_chip_set_active(bus->ci, rstvec)) { + brcmf_err("error getting out of ARM core reset\n"); + goto err; + } + +err: + brcmf_sdio_clkctl(bus, CLK_SDONLY, false); + sdio_release_host(bus->sdiodev->func1); + return bcmerror; +} + +static void brcmf_sdio_sr_init(struct brcmf_sdio *bus) +{ + int err = 0; + u8 val; + + brcmf_dbg(TRACE, "Enter\n"); + + val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + /* Add CMD14 Support */ + brcmf_sdiod_func0_wb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, + (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | + SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), + &err); + if (err) { + brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); + return; + } + + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HT, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); + return; + } + + /* set flag */ + bus->sr_enabled = true; + brcmf_dbg(INFO, "SR enabled\n"); +} + +/* enable KSO bit */ +static int brcmf_sdio_kso_init(struct brcmf_sdio *bus) +{ + struct brcmf_core *core = bus->sdio_core; + u8 val; + int err = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + /* KSO bit added in SDIO core rev 12 */ + if (core->rev < 12) + return 0; + + val = brcmf_sdiod_readb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); + return err; + } + + if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { + val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << + SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); + return err; + } + } + + return 0; +} + + +static int brcmf_sdio_bus_preinit(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + struct brcmf_core *core = bus->sdio_core; + uint pad_size; + u32 value; + int err; + + /* maxctl provided by common layer */ + if (WARN_ON(!bus_if->maxctl)) + return -EINVAL; + + /* Allocate control receive buffer */ + bus_if->maxctl += bus->roundup; + value = roundup((bus_if->maxctl + SDPCM_HDRLEN), ALIGNMENT); + value += bus->head_align; + bus->rxbuf = kmalloc(value, GFP_ATOMIC); + if (bus->rxbuf) + bus->rxblen = value; + + /* the commands below use the terms tx and rx from + * a device perspective, ie. bus:txglom affects the + * bus transfers from device to host. + */ + if (core->rev < 12) { + /* for sdio core rev < 12, disable txgloming */ + value = 0; + err = brcmf_iovar_data_set(dev, "bus:txglom", &value, + sizeof(u32)); + } else { + /* otherwise, set txglomalign */ + value = sdiodev->settings->bus.sdio.sd_sgentry_align; + /* SDIO ADMA requires at least 32 bit alignment */ + value = max_t(u32, value, ALIGNMENT); + err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, + sizeof(u32)); + } + + if (err < 0) + goto done; + + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + if (sdiodev->sg_support) { + bus->txglom = false; + value = 1; + pad_size = bus->sdiodev->func2->cur_blksize << 1; + err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom", + &value, sizeof(u32)); + if (err < 0) { + /* bus:rxglom is allowed to fail */ + err = 0; + } else { + bus->txglom = true; + bus->tx_hdrlen += SDPCM_HWEXT_LEN; + } + } + brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen); + +done: + return err; +} + +static size_t brcmf_sdio_bus_get_ramsize(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + + return bus->ci->ramsize - bus->ci->srsize; +} + +static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data, + size_t mem_size) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiodev->bus; + int err; + int address; + int offset; + int len; + + brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase, + mem_size); + + address = bus->ci->rambase; + offset = err = 0; + sdio_claim_host(sdiodev->func1); + while (offset < mem_size) { + len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK : + mem_size - offset; + err = brcmf_sdiod_ramrw(sdiodev, false, address, data, len); + if (err) { + brcmf_err("error %d on reading %d membytes at 0x%08x\n", + err, len, address); + goto done; + } + data += len; + offset += len; + address += len; + } + +done: + sdio_release_host(sdiodev->func1); + return err; +} + +void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus) +{ + if (!bus->dpc_triggered) { + bus->dpc_triggered = true; + queue_work(bus->brcmf_wq, &bus->datawork); + } +} + +void brcmf_sdio_isr(struct brcmf_sdio *bus) +{ + brcmf_dbg(TRACE, "Enter\n"); + + if (!bus) { + brcmf_err("bus is null pointer, exiting\n"); + return; + } + + /* Count the interrupt call */ + bus->sdcnt.intrcount++; + if (in_interrupt()) + atomic_set(&bus->ipend, 1); + else + if (brcmf_sdio_intr_rstatus(bus)) { + brcmf_err("failed backplane access\n"); + } + + /* Disable additional interrupts (is this needed now)? */ + if (!bus->intr) + brcmf_err("isr w/o interrupt configured!\n"); + + bus->dpc_triggered = true; + queue_work(bus->brcmf_wq, &bus->datawork); +} + +static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus) +{ + brcmf_dbg(TIMER, "Enter\n"); + + /* Poll period: check device if appropriate. */ + if (!bus->sr_enabled && + bus->poll && (++bus->polltick >= bus->pollrate)) { + u32 intstatus = 0; + + /* Reset poll tick */ + bus->polltick = 0; + + /* Check device if no interrupts */ + if (!bus->intr || + (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) { + + if (!bus->dpc_triggered) { + u8 devpend; + + sdio_claim_host(bus->sdiodev->func1); + devpend = brcmf_sdiod_func0_rb(bus->sdiodev, + SDIO_CCCR_INTx, NULL); + sdio_release_host(bus->sdiodev->func1); + intstatus = devpend & (INTR_STATUS_FUNC1 | + INTR_STATUS_FUNC2); + } + + /* If there is something, make like the ISR and + schedule the DPC */ + if (intstatus) { + bus->sdcnt.pollcnt++; + atomic_set(&bus->ipend, 1); + + bus->dpc_triggered = true; + queue_work(bus->brcmf_wq, &bus->datawork); + } + } + + /* Update interrupt tracking */ + bus->sdcnt.lastintrs = bus->sdcnt.intrcount; + } +#ifdef DEBUG + /* Poll for console output periodically */ + if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() && + bus->console_interval != 0) { + bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL); + if (bus->console.count >= bus->console_interval) { + bus->console.count -= bus->console_interval; + sdio_claim_host(bus->sdiodev->func1); + /* Make sure backplane clock is on */ + brcmf_sdio_bus_sleep(bus, false, false); + if (brcmf_sdio_readconsole(bus) < 0) + /* stop on error */ + bus->console_interval = 0; + sdio_release_host(bus->sdiodev->func1); + } + } +#endif /* DEBUG */ + + /* On idle timeout clear activity flag and/or turn off clock */ + if (!bus->dpc_triggered) { + rmb(); + if ((!bus->dpc_running) && (bus->idletime > 0) && + (bus->clkstate == CLK_AVAIL)) { + bus->idlecount++; + if (bus->idlecount > bus->idletime) { + brcmf_dbg(SDIO, "idle\n"); + sdio_claim_host(bus->sdiodev->func1); +#ifdef DEBUG + if (!BRCMF_FWCON_ON() || + bus->console_interval == 0) +#endif + brcmf_sdio_wd_timer(bus, false); + bus->idlecount = 0; + brcmf_sdio_bus_sleep(bus, true, false); + sdio_release_host(bus->sdiodev->func1); + } + } else { + bus->idlecount = 0; + } + } else { + bus->idlecount = 0; + } +} + +static void brcmf_sdio_dataworker(struct work_struct *work) +{ + struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio, + datawork); + + bus->dpc_running = true; + wmb(); + while (READ_ONCE(bus->dpc_triggered)) { + bus->dpc_triggered = false; + brcmf_sdio_dpc(bus); + bus->idlecount = 0; + } + bus->dpc_running = false; + if (brcmf_sdiod_freezing(bus->sdiodev)) { + brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN); + brcmf_sdiod_try_freeze(bus->sdiodev); + brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA); + } +} + +static void +brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev, + struct brcmf_chip *ci, u32 drivestrength) +{ + const struct sdiod_drive_str *str_tab = NULL; + u32 str_mask; + u32 str_shift; + u32 i; + u32 drivestrength_sel = 0; + u32 cc_data_temp; + u32 addr; + + if (!(ci->cc_caps & CC_CAP_PMU)) + return; + + switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) { + case SDIOD_DRVSTR_KEY(BRCM_CC_4330_CHIP_ID, 12): + str_tab = sdiod_drvstr_tab1_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BRCM_CC_4334_CHIP_ID, 17): + str_tab = sdiod_drvstr_tab6_1v8; + str_mask = 0x00001800; + str_shift = 11; + break; + case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): + /* note: 43143 does not support tristate */ + i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1; + if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) { + str_tab = sdiod_drvstr_tab2_3v3; + str_mask = 0x00000007; + str_shift = 0; + } else + brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n", + ci->name, drivestrength); + break; + case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): + str_tab = sdiod_drive_strength_tab5_1v8; + str_mask = 0x00003800; + str_shift = 11; + break; + default: + brcmf_dbg(INFO, "No SDIO driver strength init needed for chip %s rev %d pmurev %d\n", + ci->name, ci->chiprev, ci->pmurev); + break; + } + + if (str_tab != NULL) { + struct brcmf_core *pmu = brcmf_chip_get_pmu(ci); + + for (i = 0; str_tab[i].strength != 0; i++) { + if (drivestrength >= str_tab[i].strength) { + drivestrength_sel = str_tab[i].sel; + break; + } + } + addr = CORE_CC_REG(pmu->base, chipcontrol_addr); + brcmf_sdiod_writel(sdiodev, addr, 1, NULL); + cc_data_temp = brcmf_sdiod_readl(sdiodev, addr, NULL); + cc_data_temp &= ~str_mask; + drivestrength_sel <<= str_shift; + cc_data_temp |= drivestrength_sel; + brcmf_sdiod_writel(sdiodev, addr, cc_data_temp, NULL); + + brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n", + str_tab[i].strength, drivestrength, cc_data_temp); + } +} + +static int brcmf_sdio_buscoreprep(void *ctx) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + int err = 0; + u8 clkval, clkset; + + /* Try forcing SDIO core to do ALPAvail request only */ + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ; + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + if (err) { + brcmf_err("error writing for HT off\n"); + return err; + } + + /* If register supported, wait for ALPAvail and then force ALP */ + /* This may take up to 15 milliseconds */ + clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, NULL); + + if ((clkval & ~SBSDIO_AVBITS) != clkset) { + brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n", + clkset, clkval); + return -EACCES; + } + + SPINWAIT(((clkval = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + NULL)), + !SBSDIO_ALPAV(clkval)), + PMU_MAX_TRANSITION_DLY); + + if (!SBSDIO_ALPAV(clkval)) { + brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n", + clkval); + return -EBUSY; + } + + clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP; + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err); + udelay(65); + + /* Also, disable the extra SDIO pull-ups */ + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL); + + return 0; +} + +static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip, + u32 rstvec) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + struct brcmf_core *core = sdiodev->bus->sdio_core; + u32 reg_addr; + + /* clear all interrupts */ + reg_addr = core->base + SD_REG(intstatus); + brcmf_sdiod_writel(sdiodev, reg_addr, 0xFFFFFFFF, NULL); + + if (rstvec) + /* Write reset vector to address 0 */ + brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec, + sizeof(rstvec)); +} + +static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + u32 val, rev; + + val = brcmf_sdiod_readl(sdiodev, addr, NULL); + + /* + * this is a bit of special handling if reading the chipcommon chipid + * register. The 4339 is a next-gen of the 4335. It uses the same + * SDIO device id as 4335 and the chipid register returns 4335 as well. + * It can be identified as 4339 by looking at the chip revision. It + * is corrected here so the chip.c module has the right info. + */ + if (addr == CORE_CC_REG(SI_ENUM_BASE, chipid) && + (sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4339 || + sdiodev->func1->device == SDIO_DEVICE_ID_BROADCOM_4335_4339)) { + rev = (val & CID_REV_MASK) >> CID_REV_SHIFT; + if (rev >= 2) { + val &= ~CID_ID_MASK; + val |= BRCM_CC_4339_CHIP_ID; + } + } + + return val; +} + +static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val) +{ + struct brcmf_sdio_dev *sdiodev = ctx; + + brcmf_sdiod_writel(sdiodev, addr, val, NULL); +} + +static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = { + .prepare = brcmf_sdio_buscoreprep, + .activate = brcmf_sdio_buscore_activate, + .read32 = brcmf_sdio_buscore_read32, + .write32 = brcmf_sdio_buscore_write32, +}; + +static bool +brcmf_sdio_probe_attach(struct brcmf_sdio *bus) +{ + struct brcmf_sdio_dev *sdiodev; + u8 clkctl = 0; + int err = 0; + int reg_addr; + u32 reg_val; + u32 drivestrength; + + sdiodev = bus->sdiodev; + sdio_claim_host(sdiodev->func1); + + pr_debug("F1 signature read @0x18000000=0x%4x\n", + brcmf_sdiod_readl(sdiodev, SI_ENUM_BASE, NULL)); + + /* + * Force PLL off until brcmf_chip_attach() + * programs PLL control regs + */ + + brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, BRCMF_INIT_CLKCTL1, + &err); + if (!err) + clkctl = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + &err); + + if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) { + brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n", + err, BRCMF_INIT_CLKCTL1, clkctl); + goto fail; + } + + bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops); + if (IS_ERR(bus->ci)) { + brcmf_err("brcmf_chip_attach failed!\n"); + bus->ci = NULL; + goto fail; + } + + /* Pick up the SDIO core info struct from chip.c */ + bus->sdio_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV); + if (!bus->sdio_core) + goto fail; + + /* Pick up the CHIPCOMMON core info struct, for bulk IO in bcmsdh.c */ + sdiodev->cc_core = brcmf_chip_get_core(bus->ci, BCMA_CORE_CHIPCOMMON); + if (!sdiodev->cc_core) + goto fail; + + sdiodev->settings = brcmf_get_module_param(sdiodev->dev, + BRCMF_BUSTYPE_SDIO, + bus->ci->chip, + bus->ci->chiprev); + if (!sdiodev->settings) { + brcmf_err("Failed to get device parameters\n"); + goto fail; + } + /* platform specific configuration: + * alignments must be at least 4 bytes for ADMA + */ + bus->head_align = ALIGNMENT; + bus->sgentry_align = ALIGNMENT; + if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT) + bus->head_align = sdiodev->settings->bus.sdio.sd_head_align; + if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT) + bus->sgentry_align = + sdiodev->settings->bus.sdio.sd_sgentry_align; + + /* allocate scatter-gather table. sg support + * will be disabled upon allocation failure. + */ + brcmf_sdiod_sgtable_alloc(sdiodev); + +#ifdef CONFIG_PM_SLEEP + /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ + * is true or when platform data OOB irq is true). + */ + if ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_KEEP_POWER) && + ((sdio_get_host_pm_caps(sdiodev->func1) & MMC_PM_WAKE_SDIO_IRQ) || + (sdiodev->settings->bus.sdio.oob_irq_supported))) + sdiodev->bus_if->wowl_supported = true; +#endif + + if (brcmf_sdio_kso_init(bus)) { + brcmf_err("error enabling KSO\n"); + goto fail; + } + + if (sdiodev->settings->bus.sdio.drive_strength) + drivestrength = sdiodev->settings->bus.sdio.drive_strength; + else + drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH; + brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength); + + /* Set card control so an SDIO card reset does a WLAN backplane reset */ + reg_val = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err); + if (err) + goto fail; + + reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET; + + brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err); + if (err) + goto fail; + + /* set PMUControl so a backplane reset does PMU state reload */ + reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol); + reg_val = brcmf_sdiod_readl(sdiodev, reg_addr, &err); + if (err) + goto fail; + + reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT); + + brcmf_sdiod_writel(sdiodev, reg_addr, reg_val, &err); + if (err) + goto fail; + + sdio_release_host(sdiodev->func1); + + brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN); + + /* allocate header buffer */ + bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL); + if (!bus->hdrbuf) + return false; + /* Locate an appropriately-aligned portion of hdrbuf */ + bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0], + bus->head_align); + + /* Set the poll and/or interrupt flags */ + bus->intr = true; + bus->poll = false; + if (bus->poll) + bus->pollrate = 1; + + return true; + +fail: + sdio_release_host(sdiodev->func1); + return false; +} + +static int +brcmf_sdio_watchdog_thread(void *data) +{ + struct brcmf_sdio *bus = (struct brcmf_sdio *)data; + int wait; + + allow_signal(SIGTERM); + /* Run until signal received */ + brcmf_sdiod_freezer_count(bus->sdiodev); + while (1) { + if (kthread_should_stop()) + break; + brcmf_sdiod_freezer_uncount(bus->sdiodev); + wait = wait_for_completion_interruptible(&bus->watchdog_wait); + brcmf_sdiod_freezer_count(bus->sdiodev); + brcmf_sdiod_try_freeze(bus->sdiodev); + if (!wait) { + brcmf_sdio_bus_watchdog(bus); + /* Count the tick for reference */ + bus->sdcnt.tickcnt++; + reinit_completion(&bus->watchdog_wait); + } else + break; + } + return 0; +} + +static void +brcmf_sdio_watchdog(struct timer_list *t) +{ + struct brcmf_sdio *bus = from_timer(bus, t, timer); + + if (bus->watchdog_tsk) { + complete(&bus->watchdog_wait); + /* Reschedule the watchdog */ + if (bus->wd_active) + mod_timer(&bus->timer, + jiffies + BRCMF_WD_POLL); + } +} + +static +int brcmf_sdio_get_fwname(struct device *dev, const char *ext, u8 *fw_name) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_fw_request *fwreq; + struct brcmf_fw_name fwnames[] = { + { ext, fw_name }, + }; + + fwreq = brcmf_fw_alloc_request(bus_if->chip, bus_if->chiprev, + brcmf_sdio_fwnames, + ARRAY_SIZE(brcmf_sdio_fwnames), + fwnames, ARRAY_SIZE(fwnames)); + if (!fwreq) + return -ENOMEM; + + kfree(fwreq); + return 0; +} + +static const struct brcmf_bus_ops brcmf_sdio_bus_ops = { + .stop = brcmf_sdio_bus_stop, + .preinit = brcmf_sdio_bus_preinit, + .txdata = brcmf_sdio_bus_txdata, + .txctl = brcmf_sdio_bus_txctl, + .rxctl = brcmf_sdio_bus_rxctl, + .gettxq = brcmf_sdio_bus_gettxq, + .wowl_config = brcmf_sdio_wowl_config, + .get_ramsize = brcmf_sdio_bus_get_ramsize, + .get_memdump = brcmf_sdio_bus_get_memdump, + .get_fwname = brcmf_sdio_get_fwname, + .debugfs_create = brcmf_sdio_debugfs_create +}; + +#define BRCMF_SDIO_FW_CODE 0 +#define BRCMF_SDIO_FW_NVRAM 1 + +static void brcmf_sdio_firmware_callback(struct device *dev, int err, + struct brcmf_fw_request *fwreq) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_sdio_dev *sdiod = bus_if->bus_priv.sdio; + struct brcmf_sdio *bus = sdiod->bus; + struct brcmf_core *core = bus->sdio_core; + const struct firmware *code; + void *nvram; + u32 nvram_len; + u8 saveclk; + u8 devctl; + + brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err); + + if (err) + goto fail; + + code = fwreq->items[BRCMF_SDIO_FW_CODE].binary; + nvram = fwreq->items[BRCMF_SDIO_FW_NVRAM].nv_data.data; + nvram_len = fwreq->items[BRCMF_SDIO_FW_NVRAM].nv_data.len; + kfree(fwreq); + + /* try to download image and nvram to the dongle */ + bus->alp_only = true; + err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len); + if (err) + goto fail; + bus->alp_only = false; + + /* Start the watchdog timer */ + bus->sdcnt.tickcnt = 0; + brcmf_sdio_wd_timer(bus, true); + + sdio_claim_host(sdiod->func1); + + /* Make sure backplane clock is on, needed to generate F2 interrupt */ + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + if (bus->clkstate != CLK_AVAIL) + goto release; + + /* Force clocks on backplane to be sure F2 interrupt propagates */ + saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err); + if (!err) { + brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, + (saveclk | SBSDIO_FORCE_HT), &err); + } + if (err) { + brcmf_err("Failed to force clock for F2: err %d\n", err); + goto release; + } + + /* Enable function 2 (frame transfers) */ + brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata), + SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL); + + err = sdio_enable_func(sdiod->func2); + + brcmf_dbg(INFO, "enable F2: err=%d\n", err); + + /* If F2 successfully enabled, set core and enable interrupts */ + if (!err) { + /* Set up the interrupt mask and enable interrupts */ + bus->hostintmask = HOSTINTMASK; + brcmf_sdiod_writel(sdiod, core->base + SD_REG(hostintmask), + bus->hostintmask, NULL); + + switch (sdiod->func1->device) { + case SDIO_DEVICE_ID_CYPRESS_4373: + brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n", + CY_4373_F2_WATERMARK); + brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, + CY_4373_F2_WATERMARK, &err); + devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL, + &err); + devctl |= SBSDIO_DEVCTL_F2WM_ENAB; + brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl, + &err); + brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL, + CY_4373_F2_WATERMARK | + SBSDIO_MESBUSYCTRL_ENAB, &err); + break; + default: + brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, + DEFAULT_F2_WATERMARK, &err); + break; + } + } else { + /* Disable F2 again */ + sdio_disable_func(sdiod->func2); + goto release; + } + + if (brcmf_chip_sr_capable(bus->ci)) { + brcmf_sdio_sr_init(bus); + } else { + /* Restore previous clock setting */ + brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, + saveclk, &err); + } + + if (err == 0) { + /* Allow full data communication using DPC from now on. */ + brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA); + + err = brcmf_sdiod_intr_register(sdiod); + if (err != 0) + brcmf_err("intr register failed:%d\n", err); + } + + /* If we didn't come up, turn off backplane clock */ + if (err != 0) + brcmf_sdio_clkctl(bus, CLK_NONE, false); + + sdio_release_host(sdiod->func1); + + /* Assign bus interface call back */ + sdiod->bus_if->dev = sdiod->dev; + sdiod->bus_if->ops = &brcmf_sdio_bus_ops; + sdiod->bus_if->chip = bus->ci->chip; + sdiod->bus_if->chiprev = bus->ci->chiprev; + + /* Attach to the common layer, reserve hdr space */ + err = brcmf_attach(sdiod->dev, sdiod->settings); + if (err != 0) { + brcmf_err("brcmf_attach failed\n"); + goto fail; + } + + /* ready */ + return; + +release: + sdio_release_host(sdiod->func1); +fail: + brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err); + device_release_driver(&sdiod->func2->dev); + device_release_driver(dev); +} + +static struct brcmf_fw_request * +brcmf_sdio_prepare_fw_request(struct brcmf_sdio *bus) +{ + struct brcmf_fw_request *fwreq; + struct brcmf_fw_name fwnames[] = { + { ".bin", bus->sdiodev->fw_name }, + { ".txt", bus->sdiodev->nvram_name }, + }; + + fwreq = brcmf_fw_alloc_request(bus->ci->chip, bus->ci->chiprev, + brcmf_sdio_fwnames, + ARRAY_SIZE(brcmf_sdio_fwnames), + fwnames, ARRAY_SIZE(fwnames)); + if (!fwreq) + return NULL; + + fwreq->items[BRCMF_SDIO_FW_CODE].type = BRCMF_FW_TYPE_BINARY; + fwreq->items[BRCMF_SDIO_FW_NVRAM].type = BRCMF_FW_TYPE_NVRAM; + + return fwreq; +} + +struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) +{ + int ret; + struct brcmf_sdio *bus; + struct workqueue_struct *wq; + struct brcmf_fw_request *fwreq; + + brcmf_dbg(TRACE, "Enter\n"); + + /* Allocate private bus interface state */ + bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC); + if (!bus) + goto fail; + + bus->sdiodev = sdiodev; + sdiodev->bus = bus; + skb_queue_head_init(&bus->glom); + bus->txbound = BRCMF_TXBOUND; + bus->rxbound = BRCMF_RXBOUND; + bus->txminmax = BRCMF_TXMINMAX; + bus->tx_seq = SDPCM_SEQ_WRAP - 1; + + /* single-threaded workqueue */ + wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM, + dev_name(&sdiodev->func1->dev)); + if (!wq) { + brcmf_err("insufficient memory to create txworkqueue\n"); + goto fail; + } + brcmf_sdiod_freezer_count(sdiodev); + INIT_WORK(&bus->datawork, brcmf_sdio_dataworker); + bus->brcmf_wq = wq; + + /* attempt to attach to the dongle */ + if (!(brcmf_sdio_probe_attach(bus))) { + brcmf_err("brcmf_sdio_probe_attach failed\n"); + goto fail; + } + + spin_lock_init(&bus->rxctl_lock); + spin_lock_init(&bus->txq_lock); + init_waitqueue_head(&bus->ctrl_wait); + init_waitqueue_head(&bus->dcmd_resp_wait); + + /* Set up the watchdog timer */ + timer_setup(&bus->timer, brcmf_sdio_watchdog, 0); + /* Initialize watchdog thread */ + init_completion(&bus->watchdog_wait); + bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread, + bus, "brcmf_wdog/%s", + dev_name(&sdiodev->func1->dev)); + if (IS_ERR(bus->watchdog_tsk)) { + pr_warn("brcmf_watchdog thread failed to start\n"); + bus->watchdog_tsk = NULL; + } + /* Initialize DPC thread */ + bus->dpc_triggered = false; + bus->dpc_running = false; + + /* default sdio bus header length for tx packet */ + bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN; + + /* Query the F2 block size, set roundup accordingly */ + bus->blocksize = bus->sdiodev->func2->cur_blksize; + bus->roundup = min(max_roundup, bus->blocksize); + + sdio_claim_host(bus->sdiodev->func1); + + /* Disable F2 to clear any intermediate frame state on the dongle */ + sdio_disable_func(bus->sdiodev->func2); + + bus->rxflow = false; + + /* Done with backplane-dependent accesses, can drop clock... */ + brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL); + + sdio_release_host(bus->sdiodev->func1); + + /* ...and initialize clock/power states */ + bus->clkstate = CLK_SDONLY; + bus->idletime = BRCMF_IDLE_INTERVAL; + bus->idleclock = BRCMF_IDLE_ACTIVE; + + /* SR state */ + bus->sr_enabled = false; + + brcmf_dbg(INFO, "completed!!\n"); + + fwreq = brcmf_sdio_prepare_fw_request(bus); + if (!fwreq) { + ret = -ENOMEM; + goto fail; + } + + ret = brcmf_fw_get_firmwares(sdiodev->dev, fwreq, + brcmf_sdio_firmware_callback); + if (ret != 0) { + brcmf_err("async firmware request failed: %d\n", ret); + kfree(fwreq); + goto fail; + } + + return bus; + +fail: + brcmf_sdio_remove(bus); + return NULL; +} + +/* Detach and free everything */ +void brcmf_sdio_remove(struct brcmf_sdio *bus) +{ + brcmf_dbg(TRACE, "Enter\n"); + + if (bus) { + /* Stop watchdog task */ + if (bus->watchdog_tsk) { + send_sig(SIGTERM, bus->watchdog_tsk, 1); + kthread_stop(bus->watchdog_tsk); + bus->watchdog_tsk = NULL; + } + + /* De-register interrupt handler */ + brcmf_sdiod_intr_unregister(bus->sdiodev); + + brcmf_detach(bus->sdiodev->dev); + + cancel_work_sync(&bus->datawork); + if (bus->brcmf_wq) + destroy_workqueue(bus->brcmf_wq); + + if (bus->ci) { + if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) { + sdio_claim_host(bus->sdiodev->func1); + brcmf_sdio_wd_timer(bus, false); + brcmf_sdio_clkctl(bus, CLK_AVAIL, false); + /* Leave the device in state where it is + * 'passive'. This is done by resetting all + * necessary cores. + */ + msleep(20); + brcmf_chip_set_passive(bus->ci); + brcmf_sdio_clkctl(bus, CLK_NONE, false); + sdio_release_host(bus->sdiodev->func1); + } + brcmf_chip_detach(bus->ci); + } + if (bus->sdiodev->settings) + brcmf_release_module_param(bus->sdiodev->settings); + + kfree(bus->rxbuf); + kfree(bus->hdrbuf); + kfree(bus); + } + + brcmf_dbg(TRACE, "Disconnected\n"); +} + +void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active) +{ + /* Totally stop the timer */ + if (!active && bus->wd_active) { + del_timer_sync(&bus->timer); + bus->wd_active = false; + return; + } + + /* don't start the wd until fw is loaded */ + if (bus->sdiodev->state != BRCMF_SDIOD_DATA) + return; + + if (active) { + if (!bus->wd_active) { + /* Create timer again when watchdog period is + dynamically changed or in the first instance + */ + bus->timer.expires = jiffies + BRCMF_WD_POLL; + add_timer(&bus->timer); + bus->wd_active = true; + } else { + /* Re arm the timer, at last watchdog period */ + mod_timer(&bus->timer, jiffies + BRCMF_WD_POLL); + } + } +} + +int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep) +{ + int ret; + + sdio_claim_host(bus->sdiodev->func1); + ret = brcmf_sdio_bus_sleep(bus, sleep, false); + sdio_release_host(bus->sdiodev->func1); + + return ret; +} + -- cgit v1.2.3