From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Mon, 6 May 2024 03:02:30 +0200
Subject: Adding upstream version 4.19.249.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 drivers/pcmcia/sa1111_neponset.c | 124 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 124 insertions(+)
 create mode 100644 drivers/pcmcia/sa1111_neponset.c

(limited to 'drivers/pcmcia/sa1111_neponset.c')

diff --git a/drivers/pcmcia/sa1111_neponset.c b/drivers/pcmcia/sa1111_neponset.c
new file mode 100644
index 000000000..0ccf05a28
--- /dev/null
+++ b/drivers/pcmcia/sa1111_neponset.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/drivers/pcmcia/sa1100_neponset.c
+ *
+ * Neponset PCMCIA specific routines
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <mach/neponset.h>
+#include <asm/hardware/sa1111.h>
+
+#include "sa1111_generic.h"
+
+/*
+ * Neponset uses the Maxim MAX1600, with the following connections:
+ *
+ *   MAX1600      Neponset
+ *
+ *    A0VCC        SA-1111 GPIO A<1>
+ *    A1VCC        SA-1111 GPIO A<0>
+ *    A0VPP        CPLD NCR A0VPP
+ *    A1VPP        CPLD NCR A1VPP
+ *    B0VCC        SA-1111 GPIO A<2>
+ *    B1VCC        SA-1111 GPIO A<3>
+ *    B0VPP        ground (slot B is CF)
+ *    B1VPP        ground (slot B is CF)
+ *
+ *     VX          VCC (5V)
+ *     VY          VCC3_3 (3.3V)
+ *     12INA       12V
+ *     12INB       ground (slot B is CF)
+ *
+ * The MAX1600 CODE pin is tied to ground, placing the device in 
+ * "Standard Intel code" mode. Refer to the Maxim data sheet for
+ * the corresponding truth table.
+ */
+
+static int
+neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
+	unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
+	int ret;
+
+	switch (skt->nr) {
+	case 0:
+		pa_dwr_mask = GPIO_A0 | GPIO_A1;
+		ncr_mask = NCR_A0VPP | NCR_A1VPP;
+
+		if (state->Vpp == 0)
+			ncr_set = 0;
+		else if (state->Vpp == 120)
+			ncr_set = NCR_A1VPP;
+		else if (state->Vpp == state->Vcc)
+			ncr_set = NCR_A0VPP;
+		else {
+			printk(KERN_ERR "%s(): unrecognized VPP %u\n",
+			       __func__, state->Vpp);
+			return -1;
+		}
+		break;
+
+	case 1:
+		pa_dwr_mask = GPIO_A2 | GPIO_A3;
+		ncr_mask = 0;
+		ncr_set = 0;
+
+		if (state->Vpp != state->Vcc && state->Vpp != 0) {
+			printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
+			       __func__, state->Vpp);
+			return -1;
+		}
+		break;
+
+	default:
+		return -1;
+	}
+
+	/*
+	 * pa_dwr_set is the mask for selecting Vcc on both sockets.
+	 * pa_dwr_mask selects which bits (and therefore socket) we change.
+	 */
+	switch (state->Vcc) {
+	default:
+	case 0:  pa_dwr_set = 0;		break;
+	case 33: pa_dwr_set = GPIO_A1|GPIO_A2;	break;
+	case 50: pa_dwr_set = GPIO_A0|GPIO_A3;	break;
+	}
+
+	ret = sa1111_pcmcia_configure_socket(skt, state);
+	if (ret == 0) {
+		neponset_ncr_frob(ncr_mask, ncr_set);
+		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
+	}
+
+	return ret;
+}
+
+static struct pcmcia_low_level neponset_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.configure_socket	= neponset_pcmcia_configure_socket,
+	.first			= 0,
+	.nr			= 2,
+};
+
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
+{
+	/*
+	 * Set GPIO_A<3:0> to be outputs for the MAX1600,
+	 * and switch to standby mode.
+	 */
+	sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
+	sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+	sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
+	sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+	return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+				 sa11xx_drv_pcmcia_add_one);
+}
-- 
cgit v1.2.3