From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/spi/spi-s3c64xx.c | 1480 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1480 insertions(+) create mode 100644 drivers/spi/spi-s3c64xx.c (limited to 'drivers/spi/spi-s3c64xx.c') diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c new file mode 100644 index 000000000..1d948fee1 --- /dev/null +++ b/drivers/spi/spi-s3c64xx.c @@ -0,0 +1,1480 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2009 Samsung Electronics Co., Ltd. +// Jaswinder Singh + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MAX_SPI_PORTS 6 +#define S3C64XX_SPI_QUIRK_POLL (1 << 0) +#define S3C64XX_SPI_QUIRK_CS_AUTO (1 << 1) +#define AUTOSUSPEND_TIMEOUT 2000 + +/* Registers and bit-fields */ + +#define S3C64XX_SPI_CH_CFG 0x00 +#define S3C64XX_SPI_CLK_CFG 0x04 +#define S3C64XX_SPI_MODE_CFG 0x08 +#define S3C64XX_SPI_SLAVE_SEL 0x0C +#define S3C64XX_SPI_INT_EN 0x10 +#define S3C64XX_SPI_STATUS 0x14 +#define S3C64XX_SPI_TX_DATA 0x18 +#define S3C64XX_SPI_RX_DATA 0x1C +#define S3C64XX_SPI_PACKET_CNT 0x20 +#define S3C64XX_SPI_PENDING_CLR 0x24 +#define S3C64XX_SPI_SWAP_CFG 0x28 +#define S3C64XX_SPI_FB_CLK 0x2C + +#define S3C64XX_SPI_CH_HS_EN (1<<6) /* High Speed Enable */ +#define S3C64XX_SPI_CH_SW_RST (1<<5) +#define S3C64XX_SPI_CH_SLAVE (1<<4) +#define S3C64XX_SPI_CPOL_L (1<<3) +#define S3C64XX_SPI_CPHA_B (1<<2) +#define S3C64XX_SPI_CH_RXCH_ON (1<<1) +#define S3C64XX_SPI_CH_TXCH_ON (1<<0) + +#define S3C64XX_SPI_CLKSEL_SRCMSK (3<<9) +#define S3C64XX_SPI_CLKSEL_SRCSHFT 9 +#define S3C64XX_SPI_ENCLK_ENABLE (1<<8) +#define S3C64XX_SPI_PSR_MASK 0xff + +#define S3C64XX_SPI_MODE_CH_TSZ_BYTE (0<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_HALFWORD (1<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_WORD (2<<29) +#define S3C64XX_SPI_MODE_CH_TSZ_MASK (3<<29) +#define S3C64XX_SPI_MODE_BUS_TSZ_BYTE (0<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD (1<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_WORD (2<<17) +#define S3C64XX_SPI_MODE_BUS_TSZ_MASK (3<<17) +#define S3C64XX_SPI_MODE_RXDMA_ON (1<<2) +#define S3C64XX_SPI_MODE_TXDMA_ON (1<<1) +#define S3C64XX_SPI_MODE_4BURST (1<<0) + +#define S3C64XX_SPI_SLAVE_AUTO (1<<1) +#define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) +#define S3C64XX_SPI_SLAVE_NSC_CNT_2 (2<<4) + +#define S3C64XX_SPI_INT_TRAILING_EN (1<<6) +#define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) +#define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) +#define S3C64XX_SPI_INT_TX_OVERRUN_EN (1<<3) +#define S3C64XX_SPI_INT_TX_UNDERRUN_EN (1<<2) +#define S3C64XX_SPI_INT_RX_FIFORDY_EN (1<<1) +#define S3C64XX_SPI_INT_TX_FIFORDY_EN (1<<0) + +#define S3C64XX_SPI_ST_RX_OVERRUN_ERR (1<<5) +#define S3C64XX_SPI_ST_RX_UNDERRUN_ERR (1<<4) +#define S3C64XX_SPI_ST_TX_OVERRUN_ERR (1<<3) +#define S3C64XX_SPI_ST_TX_UNDERRUN_ERR (1<<2) +#define S3C64XX_SPI_ST_RX_FIFORDY (1<<1) +#define S3C64XX_SPI_ST_TX_FIFORDY (1<<0) + +#define S3C64XX_SPI_PACKET_CNT_EN (1<<16) + +#define S3C64XX_SPI_PND_TX_UNDERRUN_CLR (1<<4) +#define S3C64XX_SPI_PND_TX_OVERRUN_CLR (1<<3) +#define S3C64XX_SPI_PND_RX_UNDERRUN_CLR (1<<2) +#define S3C64XX_SPI_PND_RX_OVERRUN_CLR (1<<1) +#define S3C64XX_SPI_PND_TRAILING_CLR (1<<0) + +#define S3C64XX_SPI_SWAP_RX_HALF_WORD (1<<7) +#define S3C64XX_SPI_SWAP_RX_BYTE (1<<6) +#define S3C64XX_SPI_SWAP_RX_BIT (1<<5) +#define S3C64XX_SPI_SWAP_RX_EN (1<<4) +#define S3C64XX_SPI_SWAP_TX_HALF_WORD (1<<3) +#define S3C64XX_SPI_SWAP_TX_BYTE (1<<2) +#define S3C64XX_SPI_SWAP_TX_BIT (1<<1) +#define S3C64XX_SPI_SWAP_TX_EN (1<<0) + +#define S3C64XX_SPI_FBCLK_MSK (3<<0) + +#define FIFO_LVL_MASK(i) ((i)->port_conf->fifo_lvl_mask[i->port_id]) +#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & \ + (1 << (i)->port_conf->tx_st_done)) ? 1 : 0) +#define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i)) +#define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \ + FIFO_LVL_MASK(i)) + +#define S3C64XX_SPI_MAX_TRAILCNT 0x3ff +#define S3C64XX_SPI_TRAILCNT_OFF 19 + +#define S3C64XX_SPI_TRAILCNT S3C64XX_SPI_MAX_TRAILCNT + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) +#define is_polling(x) (x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL) + +#define RXBUSY (1<<2) +#define TXBUSY (1<<3) + +struct s3c64xx_spi_dma_data { + struct dma_chan *ch; + dma_cookie_t cookie; + enum dma_transfer_direction direction; +}; + +/** + * struct s3c64xx_spi_info - SPI Controller hardware info + * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register. + * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter. + * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter. + * @high_speed: True, if the controller supports HIGH_SPEED_EN bit. + * @clk_from_cmu: True, if the controller does not include a clock mux and + * prescaler unit. + * + * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but + * differ in some aspects such as the size of the fifo and spi bus clock + * setup. Such differences are specified to the driver using this structure + * which is provided as driver data to the driver. + */ +struct s3c64xx_spi_port_config { + int fifo_lvl_mask[MAX_SPI_PORTS]; + int rx_lvl_offset; + int tx_st_done; + int quirks; + bool high_speed; + bool clk_from_cmu; + bool clk_ioclk; +}; + +/** + * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. + * @clk: Pointer to the spi clock. + * @src_clk: Pointer to the clock used to generate SPI signals. + * @ioclk: Pointer to the i/o clock between master and slave + * @master: Pointer to the SPI Protocol master. + * @cntrlr_info: Platform specific data for the controller this driver manages. + * @lock: Controller specific lock. + * @state: Set of FLAGS to indicate status. + * @rx_dmach: Controller's DMA channel for Rx. + * @tx_dmach: Controller's DMA channel for Tx. + * @sfr_start: BUS address of SPI controller regs. + * @regs: Pointer to ioremap'ed controller registers. + * @irq: interrupt + * @xfer_completion: To indicate completion of xfer task. + * @cur_mode: Stores the active configuration of the controller. + * @cur_bpw: Stores the active bits per word settings. + * @cur_speed: Stores the active xfer clock speed. + */ +struct s3c64xx_spi_driver_data { + void __iomem *regs; + struct clk *clk; + struct clk *src_clk; + struct clk *ioclk; + struct platform_device *pdev; + struct spi_master *master; + struct s3c64xx_spi_info *cntrlr_info; + spinlock_t lock; + unsigned long sfr_start; + struct completion xfer_completion; + unsigned state; + unsigned cur_mode, cur_bpw; + unsigned cur_speed; + struct s3c64xx_spi_dma_data rx_dma; + struct s3c64xx_spi_dma_data tx_dma; + struct s3c64xx_spi_port_config *port_conf; + unsigned int port_id; +}; + +static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd) +{ + void __iomem *regs = sdd->regs; + unsigned long loops; + u32 val; + + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_RXCH_ON | S3C64XX_SPI_CH_TXCH_ON); + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val |= S3C64XX_SPI_CH_SW_RST; + val &= ~S3C64XX_SPI_CH_HS_EN; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Flush TxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + } while (TX_FIFO_LVL(val, sdd) && loops--); + + if (loops == 0) + dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n"); + + /* Flush RxFIFO*/ + loops = msecs_to_loops(1); + do { + val = readl(regs + S3C64XX_SPI_STATUS); + if (RX_FIFO_LVL(val, sdd)) + readl(regs + S3C64XX_SPI_RX_DATA); + else + break; + } while (loops--); + + if (loops == 0) + dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n"); + + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~S3C64XX_SPI_CH_SW_RST; + writel(val, regs + S3C64XX_SPI_CH_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + writel(val, regs + S3C64XX_SPI_MODE_CFG); +} + +static void s3c64xx_spi_dmacb(void *data) +{ + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_dma_data *dma = data; + unsigned long flags; + + if (dma->direction == DMA_DEV_TO_MEM) + sdd = container_of(data, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of(data, + struct s3c64xx_spi_driver_data, tx_dma); + + spin_lock_irqsave(&sdd->lock, flags); + + if (dma->direction == DMA_DEV_TO_MEM) { + sdd->state &= ~RXBUSY; + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + } else { + sdd->state &= ~TXBUSY; + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + } + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +static int prepare_dma(struct s3c64xx_spi_dma_data *dma, + struct sg_table *sgt) +{ + struct s3c64xx_spi_driver_data *sdd; + struct dma_slave_config config; + struct dma_async_tx_descriptor *desc; + int ret; + + memset(&config, 0, sizeof(config)); + + if (dma->direction == DMA_DEV_TO_MEM) { + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, rx_dma); + config.direction = dma->direction; + config.src_addr = sdd->sfr_start + S3C64XX_SPI_RX_DATA; + config.src_addr_width = sdd->cur_bpw / 8; + config.src_maxburst = 1; + dmaengine_slave_config(dma->ch, &config); + } else { + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, tx_dma); + config.direction = dma->direction; + config.dst_addr = sdd->sfr_start + S3C64XX_SPI_TX_DATA; + config.dst_addr_width = sdd->cur_bpw / 8; + config.dst_maxburst = 1; + dmaengine_slave_config(dma->ch, &config); + } + + desc = dmaengine_prep_slave_sg(dma->ch, sgt->sgl, sgt->nents, + dma->direction, DMA_PREP_INTERRUPT); + if (!desc) { + dev_err(&sdd->pdev->dev, "unable to prepare %s scatterlist", + dma->direction == DMA_DEV_TO_MEM ? "rx" : "tx"); + return -ENOMEM; + } + + desc->callback = s3c64xx_spi_dmacb; + desc->callback_param = dma; + + dma->cookie = dmaengine_submit(desc); + ret = dma_submit_error(dma->cookie); + if (ret) { + dev_err(&sdd->pdev->dev, "DMA submission failed"); + return -EIO; + } + + dma_async_issue_pending(dma->ch); + return 0; +} + +static void s3c64xx_spi_set_cs(struct spi_device *spi, bool enable) +{ + struct s3c64xx_spi_driver_data *sdd = + spi_master_get_devdata(spi->master); + + if (sdd->cntrlr_info->no_cs) + return; + + if (enable) { + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) { + writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + } else { + u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL); + + ssel |= (S3C64XX_SPI_SLAVE_AUTO | + S3C64XX_SPI_SLAVE_NSC_CNT_2); + writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + } + } else { + if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, + sdd->regs + S3C64XX_SPI_SLAVE_SEL); + } +} + +static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) +{ + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi); + + if (is_polling(sdd)) + return 0; + + spi->dma_rx = sdd->rx_dma.ch; + spi->dma_tx = sdd->tx_dma.ch; + + return 0; +} + +static bool s3c64xx_spi_can_dma(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1; +} + +static int s3c64xx_enable_datapath(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer, int dma_mode) +{ + void __iomem *regs = sdd->regs; + u32 modecfg, chcfg; + int ret = 0; + + modecfg = readl(regs + S3C64XX_SPI_MODE_CFG); + modecfg &= ~(S3C64XX_SPI_MODE_TXDMA_ON | S3C64XX_SPI_MODE_RXDMA_ON); + + chcfg = readl(regs + S3C64XX_SPI_CH_CFG); + chcfg &= ~S3C64XX_SPI_CH_TXCH_ON; + + if (dma_mode) { + chcfg &= ~S3C64XX_SPI_CH_RXCH_ON; + } else { + /* Always shift in data in FIFO, even if xfer is Tx only, + * this helps setting PCKT_CNT value for generating clocks + * as exactly needed. + */ + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + } + + if (xfer->tx_buf != NULL) { + sdd->state |= TXBUSY; + chcfg |= S3C64XX_SPI_CH_TXCH_ON; + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; + ret = prepare_dma(&sdd->tx_dma, &xfer->tx_sg); + } else { + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 4); + break; + case 16: + iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 2); + break; + default: + iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len); + break; + } + } + } + + if (xfer->rx_buf != NULL) { + sdd->state |= RXBUSY; + + if (sdd->port_conf->high_speed && sdd->cur_speed >= 30000000UL + && !(sdd->cur_mode & SPI_CPHA)) + chcfg |= S3C64XX_SPI_CH_HS_EN; + + if (dma_mode) { + modecfg |= S3C64XX_SPI_MODE_RXDMA_ON; + chcfg |= S3C64XX_SPI_CH_RXCH_ON; + writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) + | S3C64XX_SPI_PACKET_CNT_EN, + regs + S3C64XX_SPI_PACKET_CNT); + ret = prepare_dma(&sdd->rx_dma, &xfer->rx_sg); + } + } + + if (ret) + return ret; + + writel(modecfg, regs + S3C64XX_SPI_MODE_CFG); + writel(chcfg, regs + S3C64XX_SPI_CH_CFG); + + return 0; +} + +static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd, + int timeout_ms) +{ + void __iomem *regs = sdd->regs; + unsigned long val = 1; + u32 status; + + /* max fifo depth available */ + u32 max_fifo = (FIFO_LVL_MASK(sdd) >> 1) + 1; + + if (timeout_ms) + val = msecs_to_loops(timeout_ms); + + do { + status = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(status, sdd) < max_fifo && --val); + + /* return the actual received data length */ + return RX_FIFO_LVL(status, sdd); +} + +static int s3c64xx_wait_for_dma(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) +{ + void __iomem *regs = sdd->regs; + unsigned long val; + u32 status; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 10; /* some tolerance */ + + val = msecs_to_jiffies(ms) + 10; + val = wait_for_completion_timeout(&sdd->xfer_completion, val); + + /* + * If the previous xfer was completed within timeout, then + * proceed further else return -EIO. + * DmaTx returns after simply writing data in the FIFO, + * w/o waiting for real transmission on the bus to finish. + * DmaRx returns only after Dma read data from FIFO which + * needs bus transmission to finish, so we don't worry if + * Xfer involved Rx(with or without Tx). + */ + if (val && !xfer->rx_buf) { + val = msecs_to_loops(10); + status = readl(regs + S3C64XX_SPI_STATUS); + while ((TX_FIFO_LVL(status, sdd) + || !S3C64XX_SPI_ST_TX_DONE(status, sdd)) + && --val) { + cpu_relax(); + status = readl(regs + S3C64XX_SPI_STATUS); + } + + } + + /* If timed out while checking rx/tx status return error */ + if (!val) + return -EIO; + + return 0; +} + +static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd, + struct spi_transfer *xfer) +{ + void __iomem *regs = sdd->regs; + unsigned long val; + u32 status; + int loops; + u32 cpy_len; + u8 *buf; + int ms; + + /* millisecs to xfer 'len' bytes @ 'cur_speed' */ + ms = xfer->len * 8 * 1000 / sdd->cur_speed; + ms += 10; /* some tolerance */ + + val = msecs_to_loops(ms); + do { + status = readl(regs + S3C64XX_SPI_STATUS); + } while (RX_FIFO_LVL(status, sdd) < xfer->len && --val); + + if (!val) + return -EIO; + + /* If it was only Tx */ + if (!xfer->rx_buf) { + sdd->state &= ~TXBUSY; + return 0; + } + + /* + * If the receive length is bigger than the controller fifo + * size, calculate the loops and read the fifo as many times. + * loops = length / max fifo size (calculated by using the + * fifo mask). + * For any size less than the fifo size the below code is + * executed atleast once. + */ + loops = xfer->len / ((FIFO_LVL_MASK(sdd) >> 1) + 1); + buf = xfer->rx_buf; + do { + /* wait for data to be received in the fifo */ + cpy_len = s3c64xx_spi_wait_for_timeout(sdd, + (loops ? ms : 0)); + + switch (sdd->cur_bpw) { + case 32: + ioread32_rep(regs + S3C64XX_SPI_RX_DATA, + buf, cpy_len / 4); + break; + case 16: + ioread16_rep(regs + S3C64XX_SPI_RX_DATA, + buf, cpy_len / 2); + break; + default: + ioread8_rep(regs + S3C64XX_SPI_RX_DATA, + buf, cpy_len); + break; + } + + buf = buf + cpy_len; + } while (loops--); + sdd->state &= ~RXBUSY; + + return 0; +} + +static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) +{ + void __iomem *regs = sdd->regs; + int ret; + u32 val; + + /* Disable Clock */ + if (!sdd->port_conf->clk_from_cmu) { + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } + + /* Set Polarity and Phase */ + val = readl(regs + S3C64XX_SPI_CH_CFG); + val &= ~(S3C64XX_SPI_CH_SLAVE | + S3C64XX_SPI_CPOL_L | + S3C64XX_SPI_CPHA_B); + + if (sdd->cur_mode & SPI_CPOL) + val |= S3C64XX_SPI_CPOL_L; + + if (sdd->cur_mode & SPI_CPHA) + val |= S3C64XX_SPI_CPHA_B; + + writel(val, regs + S3C64XX_SPI_CH_CFG); + + /* Set Channel & DMA Mode */ + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~(S3C64XX_SPI_MODE_BUS_TSZ_MASK + | S3C64XX_SPI_MODE_CH_TSZ_MASK); + + switch (sdd->cur_bpw) { + case 32: + val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; + break; + case 16: + val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; + break; + default: + val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; + break; + } + + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + if (sdd->port_conf->clk_from_cmu) { + /* The src_clk clock is divided internally by 2 */ + ret = clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); + if (ret) + return ret; + } else { + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } + + return 0; +} + +#define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) + +static int s3c64xx_spi_prepare_message(struct spi_master *master, + struct spi_message *msg) +{ + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct spi_device *spi = msg->spi; + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + + /* Configure feedback delay */ + writel(cs->fb_delay & 0x3, sdd->regs + S3C64XX_SPI_FB_CLK); + + return 0; +} + +static int s3c64xx_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1; + const void *tx_buf = NULL; + void *rx_buf = NULL; + int target_len = 0, origin_len = 0; + int use_dma = 0; + int status; + u32 speed; + u8 bpw; + unsigned long flags; + + reinit_completion(&sdd->xfer_completion); + + /* Only BPW and Speed may change across transfers */ + bpw = xfer->bits_per_word; + speed = xfer->speed_hz; + + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { + sdd->cur_bpw = bpw; + sdd->cur_speed = speed; + sdd->cur_mode = spi->mode; + status = s3c64xx_spi_config(sdd); + if (status) + return status; + } + + if (!is_polling(sdd) && (xfer->len > fifo_len) && + sdd->rx_dma.ch && sdd->tx_dma.ch) { + use_dma = 1; + + } else if (is_polling(sdd) && xfer->len > fifo_len) { + tx_buf = xfer->tx_buf; + rx_buf = xfer->rx_buf; + origin_len = xfer->len; + + target_len = xfer->len; + if (xfer->len > fifo_len) + xfer->len = fifo_len; + } + + do { + spin_lock_irqsave(&sdd->lock, flags); + + /* Pending only which is to be done */ + sdd->state &= ~RXBUSY; + sdd->state &= ~TXBUSY; + + /* Start the signals */ + s3c64xx_spi_set_cs(spi, true); + + status = s3c64xx_enable_datapath(sdd, xfer, use_dma); + + spin_unlock_irqrestore(&sdd->lock, flags); + + if (status) { + dev_err(&spi->dev, "failed to enable data path for transfer: %d\n", status); + break; + } + + if (use_dma) + status = s3c64xx_wait_for_dma(sdd, xfer); + else + status = s3c64xx_wait_for_pio(sdd, xfer); + + if (status) { + dev_err(&spi->dev, + "I/O Error: rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, + (sdd->state & RXBUSY) ? 'f' : 'p', + (sdd->state & TXBUSY) ? 'f' : 'p', + xfer->len); + + if (use_dma) { + if (xfer->tx_buf && (sdd->state & TXBUSY)) + dmaengine_terminate_all(sdd->tx_dma.ch); + if (xfer->rx_buf && (sdd->state & RXBUSY)) + dmaengine_terminate_all(sdd->rx_dma.ch); + } + } else { + s3c64xx_flush_fifo(sdd); + } + if (target_len > 0) { + target_len -= xfer->len; + + if (xfer->tx_buf) + xfer->tx_buf += xfer->len; + + if (xfer->rx_buf) + xfer->rx_buf += xfer->len; + + if (target_len > fifo_len) + xfer->len = fifo_len; + else + xfer->len = target_len; + } + } while (target_len > 0); + + if (origin_len) { + /* Restore original xfer buffers and length */ + xfer->tx_buf = tx_buf; + xfer->rx_buf = rx_buf; + xfer->len = origin_len; + } + + return status; +} + +static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( + struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs; + struct device_node *slave_np, *data_np = NULL; + u32 fb_delay = 0; + + slave_np = spi->dev.of_node; + if (!slave_np) { + dev_err(&spi->dev, "device node not found\n"); + return ERR_PTR(-EINVAL); + } + + data_np = of_get_child_by_name(slave_np, "controller-data"); + if (!data_np) { + dev_err(&spi->dev, "child node 'controller-data' not found\n"); + return ERR_PTR(-EINVAL); + } + + cs = kzalloc(sizeof(*cs), GFP_KERNEL); + if (!cs) { + of_node_put(data_np); + return ERR_PTR(-ENOMEM); + } + + of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay); + cs->fb_delay = fb_delay; + of_node_put(data_np); + return cs; +} + +/* + * Here we only check the validity of requested configuration + * and save the configuration in a local data-structure. + * The controller is actually configured only just before we + * get a message to transfer. + */ +static int s3c64xx_spi_setup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi->controller_data; + struct s3c64xx_spi_driver_data *sdd; + int err; + + sdd = spi_master_get_devdata(spi->master); + if (spi->dev.of_node) { + cs = s3c64xx_get_slave_ctrldata(spi); + spi->controller_data = cs; + } else if (cs) { + /* On non-DT platforms the SPI core will set spi->cs_gpio + * to -ENOENT. The GPIO pin used to drive the chip select + * is defined by using platform data so spi->cs_gpio value + * has to be override to have the proper GPIO pin number. + */ + spi->cs_gpio = cs->line; + } + + if (IS_ERR_OR_NULL(cs)) { + dev_err(&spi->dev, "No CS for SPI(%d)\n", spi->chip_select); + return -ENODEV; + } + + if (!spi_get_ctldata(spi)) { + if (gpio_is_valid(spi->cs_gpio)) { + err = gpio_request_one(spi->cs_gpio, GPIOF_OUT_INIT_HIGH, + dev_name(&spi->dev)); + if (err) { + dev_err(&spi->dev, + "Failed to get /CS gpio [%d]: %d\n", + spi->cs_gpio, err); + goto err_gpio_req; + } + } + + spi_set_ctldata(spi, cs); + } + + pm_runtime_get_sync(&sdd->pdev->dev); + + /* Check if we can provide the requested rate */ + if (!sdd->port_conf->clk_from_cmu) { + u32 psr, speed; + + /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) { + spi->max_speed_hz = speed; + } else { + dev_err(&spi->dev, "Can't set %dHz transfer speed\n", + spi->max_speed_hz); + err = -EINVAL; + goto setup_exit; + } + } + + pm_runtime_mark_last_busy(&sdd->pdev->dev); + pm_runtime_put_autosuspend(&sdd->pdev->dev); + s3c64xx_spi_set_cs(spi, false); + + return 0; + +setup_exit: + pm_runtime_mark_last_busy(&sdd->pdev->dev); + pm_runtime_put_autosuspend(&sdd->pdev->dev); + /* setup() returns with device de-selected */ + s3c64xx_spi_set_cs(spi, false); + + if (gpio_is_valid(spi->cs_gpio)) + gpio_free(spi->cs_gpio); + spi_set_ctldata(spi, NULL); + +err_gpio_req: + if (spi->dev.of_node) + kfree(cs); + + return err; +} + +static void s3c64xx_spi_cleanup(struct spi_device *spi) +{ + struct s3c64xx_spi_csinfo *cs = spi_get_ctldata(spi); + + if (gpio_is_valid(spi->cs_gpio)) { + gpio_free(spi->cs_gpio); + if (spi->dev.of_node) + kfree(cs); + else { + /* On non-DT platforms, the SPI core sets + * spi->cs_gpio to -ENOENT and .setup() + * overrides it with the GPIO pin value + * passed using platform data. + */ + spi->cs_gpio = -ENOENT; + } + } + + spi_set_ctldata(spi, NULL); +} + +static irqreturn_t s3c64xx_spi_irq(int irq, void *data) +{ + struct s3c64xx_spi_driver_data *sdd = data; + struct spi_master *spi = sdd->master; + unsigned int val, clr = 0; + + val = readl(sdd->regs + S3C64XX_SPI_STATUS); + + if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) { + clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR; + dev_err(&spi->dev, "RX overrun\n"); + } + if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) { + clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR; + dev_err(&spi->dev, "RX underrun\n"); + } + if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) { + clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR; + dev_err(&spi->dev, "TX overrun\n"); + } + if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) { + clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR; + dev_err(&spi->dev, "TX underrun\n"); + } + + /* Clear the pending irq by setting and then clearing it */ + writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR); + writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR); + + return IRQ_HANDLED; +} + +static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd) +{ + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + void __iomem *regs = sdd->regs; + unsigned int val; + + sdd->cur_speed = 0; + + if (sci->no_cs) + writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + else if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); + + /* Disable Interrupts - we use Polling if not DMA mode */ + writel(0, regs + S3C64XX_SPI_INT_EN); + + if (!sdd->port_conf->clk_from_cmu) + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + regs + S3C64XX_SPI_CLK_CFG); + writel(0, regs + S3C64XX_SPI_MODE_CFG); + writel(0, regs + S3C64XX_SPI_PACKET_CNT); + + /* Clear any irq pending bits, should set and clear the bits */ + val = S3C64XX_SPI_PND_RX_OVERRUN_CLR | + S3C64XX_SPI_PND_RX_UNDERRUN_CLR | + S3C64XX_SPI_PND_TX_OVERRUN_CLR | + S3C64XX_SPI_PND_TX_UNDERRUN_CLR; + writel(val, regs + S3C64XX_SPI_PENDING_CLR); + writel(0, regs + S3C64XX_SPI_PENDING_CLR); + + writel(0, regs + S3C64XX_SPI_SWAP_CFG); + + val = readl(regs + S3C64XX_SPI_MODE_CFG); + val &= ~S3C64XX_SPI_MODE_4BURST; + val &= ~(S3C64XX_SPI_MAX_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + val |= (S3C64XX_SPI_TRAILCNT << S3C64XX_SPI_TRAILCNT_OFF); + writel(val, regs + S3C64XX_SPI_MODE_CFG); + + s3c64xx_flush_fifo(sdd); +} + +#ifdef CONFIG_OF +static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) +{ + struct s3c64xx_spi_info *sci; + u32 temp; + + sci = devm_kzalloc(dev, sizeof(*sci), GFP_KERNEL); + if (!sci) + return ERR_PTR(-ENOMEM); + + if (of_property_read_u32(dev->of_node, "samsung,spi-src-clk", &temp)) { + dev_warn(dev, "spi bus clock parent not specified, using clock at index 0 as parent\n"); + sci->src_clk_nr = 0; + } else { + sci->src_clk_nr = temp; + } + + if (of_property_read_u32(dev->of_node, "num-cs", &temp)) { + dev_warn(dev, "number of chip select lines not specified, assuming 1 chip select line\n"); + sci->num_cs = 1; + } else { + sci->num_cs = temp; + } + + sci->no_cs = of_property_read_bool(dev->of_node, "no-cs-readback"); + + return sci; +} +#else +static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev) +{ + return dev_get_platdata(dev); +} +#endif + +static const struct of_device_id s3c64xx_spi_dt_match[]; + +static inline struct s3c64xx_spi_port_config *s3c64xx_spi_get_port_config( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c64xx_spi_dt_match, pdev->dev.of_node); + return (struct s3c64xx_spi_port_config *)match->data; + } +#endif + return (struct s3c64xx_spi_port_config *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c64xx_spi_probe(struct platform_device *pdev) +{ + struct resource *mem_res; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_info *sci = dev_get_platdata(&pdev->dev); + struct spi_master *master; + int ret, irq; + char clk_name[16]; + + if (!sci && pdev->dev.of_node) { + sci = s3c64xx_spi_parse_dt(&pdev->dev); + if (IS_ERR(sci)) + return PTR_ERR(sci); + } + + if (!sci) { + dev_err(&pdev->dev, "platform_data missing!\n"); + return -ENODEV; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get SPI MEM resource\n"); + return -ENXIO; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq); + return irq; + } + + master = spi_alloc_master(&pdev->dev, + sizeof(struct s3c64xx_spi_driver_data)); + if (master == NULL) { + dev_err(&pdev->dev, "Unable to allocate SPI Master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, master); + + sdd = spi_master_get_devdata(master); + sdd->port_conf = s3c64xx_spi_get_port_config(pdev); + sdd->master = master; + sdd->cntrlr_info = sci; + sdd->pdev = pdev; + sdd->sfr_start = mem_res->start; + if (pdev->dev.of_node) { + ret = of_alias_get_id(pdev->dev.of_node, "spi"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", + ret); + goto err_deref_master; + } + sdd->port_id = ret; + } else { + sdd->port_id = pdev->id; + } + + sdd->cur_bpw = 8; + + sdd->tx_dma.direction = DMA_MEM_TO_DEV; + sdd->rx_dma.direction = DMA_DEV_TO_MEM; + + master->dev.of_node = pdev->dev.of_node; + master->bus_num = sdd->port_id; + master->setup = s3c64xx_spi_setup; + master->cleanup = s3c64xx_spi_cleanup; + master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer; + master->prepare_message = s3c64xx_spi_prepare_message; + master->transfer_one = s3c64xx_spi_transfer_one; + master->num_chipselect = sci->num_cs; + master->dma_alignment = 8; + master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) | + SPI_BPW_MASK(8); + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->auto_runtime_pm = true; + if (!is_polling(sdd)) + master->can_dma = s3c64xx_spi_can_dma; + + sdd->regs = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(sdd->regs)) { + ret = PTR_ERR(sdd->regs); + goto err_deref_master; + } + + if (sci->cfg_gpio && sci->cfg_gpio()) { + dev_err(&pdev->dev, "Unable to config gpio\n"); + ret = -EBUSY; + goto err_deref_master; + } + + /* Setup clocks */ + sdd->clk = devm_clk_get(&pdev->dev, "spi"); + if (IS_ERR(sdd->clk)) { + dev_err(&pdev->dev, "Unable to acquire clock 'spi'\n"); + ret = PTR_ERR(sdd->clk); + goto err_deref_master; + } + + ret = clk_prepare_enable(sdd->clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n"); + goto err_deref_master; + } + + sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr); + sdd->src_clk = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(sdd->src_clk)) { + dev_err(&pdev->dev, + "Unable to acquire clock '%s'\n", clk_name); + ret = PTR_ERR(sdd->src_clk); + goto err_disable_clk; + } + + ret = clk_prepare_enable(sdd->src_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name); + goto err_disable_clk; + } + + if (sdd->port_conf->clk_ioclk) { + sdd->ioclk = devm_clk_get(&pdev->dev, "spi_ioclk"); + if (IS_ERR(sdd->ioclk)) { + dev_err(&pdev->dev, "Unable to acquire 'ioclk'\n"); + ret = PTR_ERR(sdd->ioclk); + goto err_disable_src_clk; + } + + ret = clk_prepare_enable(sdd->ioclk); + if (ret) { + dev_err(&pdev->dev, "Couldn't enable clock 'ioclk'\n"); + goto err_disable_src_clk; + } + } + + if (!is_polling(sdd)) { + /* Acquire DMA channels */ + sdd->rx_dma.ch = dma_request_slave_channel_reason(&pdev->dev, + "rx"); + if (IS_ERR(sdd->rx_dma.ch)) { + dev_err(&pdev->dev, "Failed to get RX DMA channel\n"); + ret = PTR_ERR(sdd->rx_dma.ch); + goto err_disable_io_clk; + } + sdd->tx_dma.ch = dma_request_slave_channel_reason(&pdev->dev, + "tx"); + if (IS_ERR(sdd->tx_dma.ch)) { + dev_err(&pdev->dev, "Failed to get TX DMA channel\n"); + ret = PTR_ERR(sdd->tx_dma.ch); + goto err_release_rx_dma; + } + } + + pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + /* Setup Deufult Mode */ + s3c64xx_spi_hwinit(sdd); + + spin_lock_init(&sdd->lock); + init_completion(&sdd->xfer_completion); + + ret = devm_request_irq(&pdev->dev, irq, s3c64xx_spi_irq, 0, + "spi-s3c64xx", sdd); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n", + irq, ret); + goto err_pm_put; + } + + writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN | + S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, + sdd->regs + S3C64XX_SPI_INT_EN); + + ret = devm_spi_register_master(&pdev->dev, master); + if (ret != 0) { + dev_err(&pdev->dev, "cannot register SPI master: %d\n", ret); + goto err_pm_put; + } + + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Slaves attached\n", + sdd->port_id, master->num_chipselect); + dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n", + mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1); + + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + + return 0; + +err_pm_put: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + if (!is_polling(sdd)) + dma_release_channel(sdd->tx_dma.ch); +err_release_rx_dma: + if (!is_polling(sdd)) + dma_release_channel(sdd->rx_dma.ch); +err_disable_io_clk: + clk_disable_unprepare(sdd->ioclk); +err_disable_src_clk: + clk_disable_unprepare(sdd->src_clk); +err_disable_clk: + clk_disable_unprepare(sdd->clk); +err_deref_master: + spi_master_put(master); + + return ret; +} + +static int s3c64xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + pm_runtime_get_sync(&pdev->dev); + + writel(0, sdd->regs + S3C64XX_SPI_INT_EN); + + if (!is_polling(sdd)) { + dma_release_channel(sdd->rx_dma.ch); + dma_release_channel(sdd->tx_dma.ch); + } + + clk_disable_unprepare(sdd->ioclk); + + clk_disable_unprepare(sdd->src_clk); + + clk_disable_unprepare(sdd->clk); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int s3c64xx_spi_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + int ret = spi_master_suspend(master); + if (ret) + return ret; + + ret = pm_runtime_force_suspend(dev); + if (ret < 0) + return ret; + + sdd->cur_speed = 0; /* Output Clock is stopped */ + + return 0; +} + +static int s3c64xx_spi_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; + int ret; + + if (sci->cfg_gpio) + sci->cfg_gpio(); + + ret = pm_runtime_force_resume(dev); + if (ret < 0) + return ret; + + return spi_master_resume(master); +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int s3c64xx_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + clk_disable_unprepare(sdd->clk); + clk_disable_unprepare(sdd->src_clk); + clk_disable_unprepare(sdd->ioclk); + + return 0; +} + +static int s3c64xx_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + int ret; + + if (sdd->port_conf->clk_ioclk) { + ret = clk_prepare_enable(sdd->ioclk); + if (ret != 0) + return ret; + } + + ret = clk_prepare_enable(sdd->src_clk); + if (ret != 0) + goto err_disable_ioclk; + + ret = clk_prepare_enable(sdd->clk); + if (ret != 0) + goto err_disable_src_clk; + + s3c64xx_spi_hwinit(sdd); + + return 0; + +err_disable_src_clk: + clk_disable_unprepare(sdd->src_clk); +err_disable_ioclk: + clk_disable_unprepare(sdd->ioclk); + + return ret; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops s3c64xx_spi_pm = { + SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume) + SET_RUNTIME_PM_OPS(s3c64xx_spi_runtime_suspend, + s3c64xx_spi_runtime_resume, NULL) +}; + +static struct s3c64xx_spi_port_config s3c2443_spi_port_config = { + .fifo_lvl_mask = { 0x7f }, + .rx_lvl_offset = 13, + .tx_st_done = 21, + .high_speed = true, +}; + +static struct s3c64xx_spi_port_config s3c6410_spi_port_config = { + .fifo_lvl_mask = { 0x7f, 0x7F }, + .rx_lvl_offset = 13, + .tx_st_done = 21, +}; + +static struct s3c64xx_spi_port_config s5pv210_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7F }, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, +}; + +static struct s3c64xx_spi_port_config exynos4_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F }, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, + .clk_from_cmu = true, +}; + +static struct s3c64xx_spi_port_config exynos7_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7F, 0x7F, 0x7F, 0x7F, 0x1ff}, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, + .clk_from_cmu = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + +static struct s3c64xx_spi_port_config exynos5433_spi_port_config = { + .fifo_lvl_mask = { 0x1ff, 0x7f, 0x7f, 0x7f, 0x7f, 0x1ff}, + .rx_lvl_offset = 15, + .tx_st_done = 25, + .high_speed = true, + .clk_from_cmu = true, + .clk_ioclk = true, + .quirks = S3C64XX_SPI_QUIRK_CS_AUTO, +}; + +static const struct platform_device_id s3c64xx_spi_driver_ids[] = { + { + .name = "s3c2443-spi", + .driver_data = (kernel_ulong_t)&s3c2443_spi_port_config, + }, { + .name = "s3c6410-spi", + .driver_data = (kernel_ulong_t)&s3c6410_spi_port_config, + }, + { }, +}; + +static const struct of_device_id s3c64xx_spi_dt_match[] = { + { .compatible = "samsung,s3c2443-spi", + .data = (void *)&s3c2443_spi_port_config, + }, + { .compatible = "samsung,s3c6410-spi", + .data = (void *)&s3c6410_spi_port_config, + }, + { .compatible = "samsung,s5pv210-spi", + .data = (void *)&s5pv210_spi_port_config, + }, + { .compatible = "samsung,exynos4210-spi", + .data = (void *)&exynos4_spi_port_config, + }, + { .compatible = "samsung,exynos7-spi", + .data = (void *)&exynos7_spi_port_config, + }, + { .compatible = "samsung,exynos5433-spi", + .data = (void *)&exynos5433_spi_port_config, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, s3c64xx_spi_dt_match); + +static struct platform_driver s3c64xx_spi_driver = { + .driver = { + .name = "s3c64xx-spi", + .pm = &s3c64xx_spi_pm, + .of_match_table = of_match_ptr(s3c64xx_spi_dt_match), + }, + .probe = s3c64xx_spi_probe, + .remove = s3c64xx_spi_remove, + .id_table = s3c64xx_spi_driver_ids, +}; +MODULE_ALIAS("platform:s3c64xx-spi"); + +module_platform_driver(s3c64xx_spi_driver); + +MODULE_AUTHOR("Jaswinder Singh "); +MODULE_DESCRIPTION("S3C64XX SPI Controller Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3