From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- drivers/usb/host/xhci-rcar.c | 274 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 274 insertions(+) create mode 100644 drivers/usb/host/xhci-rcar.c (limited to 'drivers/usb/host/xhci-rcar.c') diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c new file mode 100644 index 000000000..4ebbe2c23 --- /dev/null +++ b/drivers/usb/host/xhci-rcar.c @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver for R-Car SoCs + * + * Copyright (C) 2014 Renesas Electronics Corporation + */ + +#include +#include +#include +#include +#include +#include + +#include "xhci.h" +#include "xhci-plat.h" +#include "xhci-rcar.h" + +/* +* - The V3 firmware is for almost all R-Car Gen3 (except r8a7795 ES1.x) +* - The V2 firmware is for r8a7795 ES1.x. +* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes +* performance degradation. So, this driver continues to use the V1 if R-Car +* Gen2. +* - The V1 firmware is impossible to use on R-Car Gen3. +*/ +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); + +/*** Register Offset ***/ +#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */ +#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ +#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */ +#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */ + +#define RCAR_USB3_LCLK 0xa44 /* LCLK Select */ +#define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */ +#define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */ +#define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */ +#define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */ +#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */ + +/*** Register Settings ***/ +/* AXI Host Control Status */ +#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000 +#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001 +#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \ + RCAR_USB3_AXH_STA_B2_PLL_ACTIVE) + +/* Interrupt Enable */ +#define RCAR_USB3_INT_XHC_ENA 0x00000001 +#define RCAR_USB3_INT_PME_ENA 0x00000002 +#define RCAR_USB3_INT_HSE_ENA 0x00000004 +#define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \ + RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA) + +/* FW Download Control & Status */ +#define RCAR_USB3_DL_CTRL_ENABLE 0x00000001 +#define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010 +#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100 + +/* LCLK Select */ +#define RCAR_USB3_LCLK_ENA_VAL 0x01030001 + +/* USB3.0 Configuration */ +#define RCAR_USB3_CONF1_VAL 0x00030204 +#define RCAR_USB3_CONF2_VAL 0x00030300 +#define RCAR_USB3_CONF3_VAL 0x13802007 + +/* USB3.0 Polarity */ +#define RCAR_USB3_RX_POL_VAL BIT(21) +#define RCAR_USB3_TX_POL_VAL BIT(4) + +/* For soc_device_attribute */ +#define RCAR_XHCI_FIRMWARE_V2 BIT(0) /* FIRMWARE V2 */ +#define RCAR_XHCI_FIRMWARE_V3 BIT(1) /* FIRMWARE V3 */ + +static const struct soc_device_attribute rcar_quirks_match[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = (void *)RCAR_XHCI_FIRMWARE_V2, + }, + { /* sentinel */ }, +}; + +static void xhci_rcar_start_gen2(struct usb_hcd *hcd) +{ + /* LCLK Select */ + writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK); + /* USB3.0 Configuration */ + writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1); + writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2); + writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3); + /* USB3.0 Polarity */ + writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL); + writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL); +} + +static int xhci_rcar_is_gen2(struct device *dev) +{ + struct device_node *node = dev->of_node; + + return of_device_is_compatible(node, "renesas,xhci-r8a7790") || + of_device_is_compatible(node, "renesas,xhci-r8a7791") || + of_device_is_compatible(node, "renesas,xhci-r8a7793") || + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); +} + +static int xhci_rcar_is_gen3(struct device *dev) +{ + struct device_node *node = dev->of_node; + + return of_device_is_compatible(node, "renesas,xhci-r8a7795") || + of_device_is_compatible(node, "renesas,xhci-r8a7796") || + of_device_is_compatible(node, "renesas,rcar-gen3-xhci"); +} + +void xhci_rcar_start(struct usb_hcd *hcd) +{ + u32 temp; + + if (hcd->regs != NULL) { + /* Interrupt Enable */ + temp = readl(hcd->regs + RCAR_USB3_INT_ENA); + temp |= RCAR_USB3_INT_ENA_VAL; + writel(temp, hcd->regs + RCAR_USB3_INT_ENA); + if (xhci_rcar_is_gen2(hcd->self.controller)) + xhci_rcar_start_gen2(hcd); + } +} + +static int xhci_rcar_download_firmware(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + void __iomem *regs = hcd->regs; + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + const struct firmware *fw; + int retval, index, j, time; + int timeout = 10000; + u32 data, val, temp; + u32 quirks = 0; + const struct soc_device_attribute *attr; + const char *firmware_name; + + /* + * According to the datasheet, "Upon the completion of FW Download, + * there is no need to write or reload FW". + */ + if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS) + return 0; + + attr = soc_device_match(rcar_quirks_match); + if (attr) + quirks = (uintptr_t)attr->data; + + if (quirks & RCAR_XHCI_FIRMWARE_V2) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2; + else if (quirks & RCAR_XHCI_FIRMWARE_V3) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3; + else + firmware_name = priv->firmware_name; + + /* request R-Car USB3.0 firmware */ + retval = request_firmware(&fw, firmware_name, dev); + if (retval) + return retval; + + /* download R-Car USB3.0 firmware */ + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp |= RCAR_USB3_DL_CTRL_ENABLE; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + for (index = 0; index < fw->size; index += 4) { + /* to avoid reading beyond the end of the buffer */ + for (data = 0, j = 3; j >= 0; j--) { + if ((j + index) < fw->size) + data |= fw->data[index + j] << (8 * j); + } + writel(data, regs + RCAR_USB3_FW_DATA0); + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + for (time = 0; time < timeout; time++) { + val = readl(regs + RCAR_USB3_DL_CTRL); + if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0) + break; + udelay(1); + } + if (time == timeout) { + retval = -ETIMEDOUT; + break; + } + } + + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp &= ~RCAR_USB3_DL_CTRL_ENABLE; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + for (time = 0; time < timeout; time++) { + val = readl(regs + RCAR_USB3_DL_CTRL); + if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) { + retval = 0; + break; + } + udelay(1); + } + if (time == timeout) + retval = -ETIMEDOUT; + + release_firmware(fw); + + return retval; +} + +static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) +{ + int timeout = 1000; + u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK; + + while (timeout > 0) { + val = readl(hcd->regs + RCAR_USB3_AXH_STA); + if ((val & mask) == mask) + return true; + udelay(1); + timeout--; + } + + return false; +} + +/* This function needs to initialize a "phy" of usb before */ +int xhci_rcar_init_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + /* If hcd->regs is NULL, we don't just call the following function */ + if (!hcd->regs) + return 0; + + /* + * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set + * to 1. However, these SoCs don't support 64-bit address memory + * pointers. So, this driver clears the AC64 bit of xhci->hcc_params + * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in + * xhci_gen_setup(). + * + * And, since the firmware/internal CPU control the USBSTS.STS_HALT + * and the process speed is down when the roothub port enters U3, + * long delay for the handshake of STS_HALT is neeed in xhci_suspend(). + */ + if (xhci_rcar_is_gen2(hcd->self.controller) || + xhci_rcar_is_gen3(hcd->self.controller)) { + xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND; + } + + if (!xhci_rcar_wait_for_pll_active(hcd)) + return -ETIMEDOUT; + + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + return xhci_rcar_download_firmware(hcd); +} + +int xhci_rcar_resume_quirk(struct usb_hcd *hcd) +{ + int ret; + + ret = xhci_rcar_download_firmware(hcd); + if (!ret) + xhci_rcar_start(hcd); + + return ret; +} -- cgit v1.2.3