From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- net/802/fddi.c | 182 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 net/802/fddi.c (limited to 'net/802/fddi.c') diff --git a/net/802/fddi.c b/net/802/fddi.c new file mode 100644 index 000000000..90f141656 --- /dev/null +++ b/net/802/fddi.c @@ -0,0 +1,182 @@ +/* + * INET An implementation of the TCP/IP protocol suite for the LINUX + * operating system. INET is implemented using the BSD Socket + * interface as the means of communication with the user level. + * + * FDDI-type device handling. + * + * Version: @(#)fddi.c 1.0.0 08/12/96 + * + * Authors: Lawrence V. Stefani, + * + * fddi.c is based on previous eth.c and tr.c work by + * Ross Biro + * Fred N. van Kempen, + * Mark Evans, + * Florian La Roche, + * Alan Cox, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Changes + * Alan Cox : New arp/rebuild header + * Maciej W. Rozycki : IPv6 support + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Create the FDDI MAC header for an arbitrary protocol layer + * + * saddr=NULL means use device source address + * daddr=NULL means leave destination address (eg unresolved arp) + */ + +static int fddi_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, + const void *daddr, const void *saddr, unsigned int len) +{ + int hl = FDDI_K_SNAP_HLEN; + struct fddihdr *fddi; + + if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP) + hl=FDDI_K_8022_HLEN-3; + fddi = skb_push(skb, hl); + fddi->fc = FDDI_FC_K_ASYNC_LLC_DEF; + if(type == ETH_P_IP || type == ETH_P_IPV6 || type == ETH_P_ARP) + { + fddi->hdr.llc_snap.dsap = FDDI_EXTENDED_SAP; + fddi->hdr.llc_snap.ssap = FDDI_EXTENDED_SAP; + fddi->hdr.llc_snap.ctrl = FDDI_UI_CMD; + fddi->hdr.llc_snap.oui[0] = 0x00; + fddi->hdr.llc_snap.oui[1] = 0x00; + fddi->hdr.llc_snap.oui[2] = 0x00; + fddi->hdr.llc_snap.ethertype = htons(type); + } + + /* Set the source and destination hardware addresses */ + + if (saddr != NULL) + memcpy(fddi->saddr, saddr, dev->addr_len); + else + memcpy(fddi->saddr, dev->dev_addr, dev->addr_len); + + if (daddr != NULL) + { + memcpy(fddi->daddr, daddr, dev->addr_len); + return hl; + } + + return -hl; +} + +/* + * Determine the packet's protocol ID and fill in skb fields. + * This routine is called before an incoming packet is passed + * up. It's used to fill in specific skb fields and to set + * the proper pointer to the start of packet data (skb->data). + */ + +__be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev) +{ + struct fddihdr *fddi = (struct fddihdr *)skb->data; + __be16 type; + + /* + * Set mac.raw field to point to FC byte, set data field to point + * to start of packet data. Assume 802.2 SNAP frames for now. + */ + + skb->dev = dev; + skb_reset_mac_header(skb); /* point to frame control (FC) */ + + if(fddi->hdr.llc_8022_1.dsap==0xe0) + { + skb_pull(skb, FDDI_K_8022_HLEN-3); + type = htons(ETH_P_802_2); + } + else + { + skb_pull(skb, FDDI_K_SNAP_HLEN); /* adjust for 21 byte header */ + type=fddi->hdr.llc_snap.ethertype; + } + + /* Set packet type based on destination address and flag settings */ + + if (*fddi->daddr & 0x01) + { + if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0) + skb->pkt_type = PACKET_BROADCAST; + else + skb->pkt_type = PACKET_MULTICAST; + } + + else if (dev->flags & IFF_PROMISC) + { + if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN)) + skb->pkt_type = PACKET_OTHERHOST; + } + + /* Assume 802.2 SNAP frames, for now */ + + return type; +} + +EXPORT_SYMBOL(fddi_type_trans); + +static const struct header_ops fddi_header_ops = { + .create = fddi_header, +}; + + +static void fddi_setup(struct net_device *dev) +{ + dev->header_ops = &fddi_header_ops; + dev->type = ARPHRD_FDDI; + dev->hard_header_len = FDDI_K_SNAP_HLEN+3; /* Assume 802.2 SNAP hdr len + 3 pad bytes */ + dev->mtu = FDDI_K_SNAP_DLEN; /* Assume max payload of 802.2 SNAP frame */ + dev->min_mtu = FDDI_K_SNAP_HLEN; + dev->max_mtu = FDDI_K_SNAP_DLEN; + dev->addr_len = FDDI_K_ALEN; + dev->tx_queue_len = 100; /* Long queues on FDDI */ + dev->flags = IFF_BROADCAST | IFF_MULTICAST; + + memset(dev->broadcast, 0xFF, FDDI_K_ALEN); +} + +/** + * alloc_fddidev - Register FDDI device + * @sizeof_priv: Size of additional driver-private structure to be allocated + * for this FDDI device + * + * Fill in the fields of the device structure with FDDI-generic values. + * + * Constructs a new net device, complete with a private data area of + * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for + * this private data area. + */ +struct net_device *alloc_fddidev(int sizeof_priv) +{ + return alloc_netdev(sizeof_priv, "fddi%d", NET_NAME_UNKNOWN, + fddi_setup); +} +EXPORT_SYMBOL(alloc_fddidev); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3