From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- net/l2tp/Kconfig | 109 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 net/l2tp/Kconfig (limited to 'net/l2tp/Kconfig') diff --git a/net/l2tp/Kconfig b/net/l2tp/Kconfig new file mode 100644 index 000000000..378c73b26 --- /dev/null +++ b/net/l2tp/Kconfig @@ -0,0 +1,109 @@ +# +# Layer Two Tunneling Protocol (L2TP) +# + +menuconfig L2TP + tristate "Layer Two Tunneling Protocol (L2TP)" + depends on (IPV6 || IPV6=n) + depends on INET + select NET_UDP_TUNNEL + ---help--- + Layer Two Tunneling Protocol + + From RFC 2661 . + + L2TP facilitates the tunneling of packets across an + intervening network in a way that is as transparent as + possible to both end-users and applications. + + L2TP is often used to tunnel PPP traffic over IP + tunnels. One IP tunnel may carry thousands of individual PPP + connections. L2TP is also used as a VPN protocol, popular + with home workers to connect to their offices. + + L2TPv3 allows other protocols as well as PPP to be carried + over L2TP tunnels. L2TPv3 is defined in RFC 3931 + . + + The kernel component handles only L2TP data packets: a + userland daemon handles L2TP the control protocol (tunnel + and session setup). One such daemon is OpenL2TP + (http://openl2tp.org/). + + If you don't need L2TP, say N. To compile all L2TP code as + modules, choose M here. + +config L2TP_DEBUGFS + tristate "L2TP debugfs support" + depends on L2TP && DEBUG_FS + help + Support for l2tp directory in debugfs filesystem. This may be + used to dump internal state of the l2tp drivers for problem + analysis. + + If unsure, say 'Y'. + + To compile this driver as a module, choose M here. The module + will be called l2tp_debugfs. + +config L2TP_V3 + bool "L2TPv3 support" + depends on L2TP + help + Layer Two Tunneling Protocol Version 3 + + From RFC 3931 . + + The Layer Two Tunneling Protocol (L2TP) provides a dynamic + mechanism for tunneling Layer 2 (L2) "circuits" across a + packet-oriented data network (e.g., over IP). L2TP, as + originally defined in RFC 2661, is a standard method for + tunneling Point-to-Point Protocol (PPP) [RFC1661] sessions. + L2TP has since been adopted for tunneling a number of other + L2 protocols, including ATM, Frame Relay, HDLC and even raw + ethernet frames. + + If you are connecting to L2TPv3 equipment, or you want to + tunnel raw ethernet frames using L2TP, say Y here. If + unsure, say N. + +config L2TP_IP + tristate "L2TP IP encapsulation for L2TPv3" + depends on L2TP_V3 + help + Support for L2TP-over-IP socket family. + + The L2TPv3 protocol defines two possible encapsulations for + L2TP frames, namely UDP and plain IP (without UDP). This + driver provides a new L2TPIP socket family with which + userspace L2TPv3 daemons may create L2TP/IP tunnel sockets + when UDP encapsulation is not required. When L2TP is carried + in IP packets, it used IP protocol number 115, so this port + must be enabled in firewalls. + + To compile this driver as a module, choose M here. The module + will be called l2tp_ip. + +config L2TP_ETH + tristate "L2TP ethernet pseudowire support for L2TPv3" + depends on L2TP_V3 + help + Support for carrying raw ethernet frames over L2TPv3. + + From RFC 4719 . + + The Layer 2 Tunneling Protocol, Version 3 (L2TPv3) can be + used as a control protocol and for data encapsulation to set + up Pseudowires for transporting layer 2 Packet Data Units + across an IP network [RFC3931]. + + This driver provides an ethernet virtual interface for each + L2TP ethernet pseudowire instance. Standard Linux tools may + be used to assign an IP address to the local virtual + interface, or add the interface to a bridge. + + If you are using L2TPv3, you will almost certainly want to + enable this option. + + To compile this driver as a module, choose M here. The module + will be called l2tp_eth. -- cgit v1.2.3