From 76cb841cb886eef6b3bee341a2266c76578724ad Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 03:02:30 +0200 Subject: Adding upstream version 4.19.249. Signed-off-by: Daniel Baumann --- .../pm-graph/config/custom-timeline-functions.cfg | 205 +++++++++++++++++++++ 1 file changed, 205 insertions(+) create mode 100644 tools/power/pm-graph/config/custom-timeline-functions.cfg (limited to 'tools/power/pm-graph/config/custom-timeline-functions.cfg') diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg new file mode 100644 index 000000000..f8fcb06fd --- /dev/null +++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg @@ -0,0 +1,205 @@ +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config thisfile.txt +# + +[Settings] + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: true + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time}-custom + +# Override default timeline entries +# Do not use the internal default functions for timeline entries (default: false) +# Set this to true if you intend to only use the ones defined in this config +override-timeline-functions: true + +# Override default dev timeline entries +# Do not use the internal default functions for dev timeline entries (default: false) +# Set this to true if you intend to only use the ones defined in this config +override-dev-timeline-functions: true + +[timeline_functions_x86_64] +# +# Function calls to display in the timeline alongside device callbacks. +# The tool has an internal set of these functions which should cover the +# whole of kernel execution, but you can append or override here. +# +# This is a list of kprobes which use both symbol data and function arg data. +# The function calls are displayed on the timeline alongside the device blocks. +# The args are pulled directly from the stack using this architecture's registers +# and stack formatting. Three pieces of info are required. The function name, +# a format string, and an argument list +# +# Entry format: +# +# function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple] +# +# Required Arguments: +# +# function: The symbol name for the function you want probed, this is the +# minimum required for an entry, it will show up as the function +# name with no arguments. +# +# example: _cpu_up: +# +# Optional Arguments: +# +# format: The format to display the data on the timeline in. Use braces to +# enclose the arg names. +# +# example: CPU_ON[{cpu}] +# +# color: The color of the entry block in the timeline. The default color is +# transparent, so the entry shares the phase color. The color is an +# html color string, either a word, or an RGB. +# +# example: [color=#CC00CC] +# +# arglist: A list of arguments from registers/stack addresses. See URL: +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst +# +# example: cpu=%di:s32 +# +# Example: Display cpu resume in the timeline +# +# _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange] +# +_cpu_down: CPU_OFF[{cpu}] cpu=%di:s32 +_cpu_up: CPU_ON[{cpu}] cpu=%di:s32 +sys_sync: +pm_prepare_console: +pm_notifier_call_chain: +freeze_processes: +freeze_kernel_threads: +pm_restrict_gfp_mask: +acpi_suspend_begin: +suspend_console: +acpi_pm_prepare: +syscore_suspend: +arch_enable_nonboot_cpus_end: +syscore_resume: +acpi_pm_finish: +resume_console: +acpi_pm_end: +pm_restore_gfp_mask: +thaw_processes: +pm_restore_console: + +[dev_timeline_functions_x86_64] +# +# Dev mode function calls to display inside timeline entries +# +# This is a list of kprobes which use both symbol data and function arg data. +# The function calls are displayed on the timeline alongside the device blocks. +# The args are pulled directly from the stack using this architecture's registers +# and stack formatting. Three pieces of info are required. The function name, +# a format string, and an argument list +# +# Entry format: +# +# function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple] +# +# Required Arguments: +# +# function: The symbol name for the function you want probed, this is the +# minimum required for an entry, it will show up as the function +# name with no arguments. +# +# example: ata_eh_recover: +# +# Optional Arguments: +# +# format: The format to display the data on the timeline in. Use braces to +# enclose the arg names. +# +# example: ata{port}_port_reset +# +# color: The color of the entry block in the timeline. The default color is +# transparent, so the entry shares the phase color. The color is an +# html color string, either a word, or an RGB. +# +# example: [color=#CC00CC] +# +# arglist: A list of arguments from registers/stack addresses. See URL: +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst +# +# example: port=+36(%di):s32 +# +# Example: Display ATA port reset as ataN_port_reset in the timeline +# +# ata_eh_recover: ata{port}_port_reset port=+36(%di):s32 +# +msleep: msleep time=%di:s32 +schedule_timeout_uninterruptible: schedule_timeout_uninterruptible timeout=%di:s32 +schedule_timeout: schedule_timeout timeout=%di:s32 +usleep_range: usleep_range min=%di:s32 max=%si:s32 +__const_udelay: udelay loops=%di:s32 +__mutex_lock_slowpath: mutex_lock_slowpath +ata_eh_recover: ata_eh_recover port=+36(%di):s32 +acpi_os_stall: +acpi_resume_power_resources: +acpi_ps_parse_aml: +ext4_sync_fs: +i915_gem_resume: +i915_restore_state: +intel_opregion_setup: +g4x_pre_enable_dp: +vlv_pre_enable_dp: +chv_pre_enable_dp: +g4x_enable_dp: +vlv_enable_dp: +intel_hpd_init: +intel_opregion_register: +intel_dp_detect: +intel_hdmi_detect: +intel_opregion_init: +intel_fbdev_set_suspend: -- cgit v1.2.3