// SPDX-License-Identifier: GPL-2.0 /* * Intel IO-APIC support for multi-Pentium hosts. * * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo * * Many thanks to Stig Venaas for trying out countless experimental * patches and reporting/debugging problems patiently! * * (c) 1999, Multiple IO-APIC support, developed by * Ken-ichi Yaku and * Hidemi Kishimoto , * further tested and cleaned up by Zach Brown * and Ingo Molnar * * Fixes * Maciej W. Rozycki : Bits for genuine 82489DX APICs; * thanks to Eric Gilmore * and Rolf G. Tews * for testing these extensively * Paul Diefenbaugh : Added full ACPI support * * Historical information which is worth to be preserved: * * - SiS APIC rmw bug: * * We used to have a workaround for a bug in SiS chips which * required to rewrite the index register for a read-modify-write * operation as the chip lost the index information which was * setup for the read already. We cache the data now, so that * workaround has been removed. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* time_after() */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define for_each_ioapic(idx) \ for ((idx) = 0; (idx) < nr_ioapics; (idx)++) #define for_each_ioapic_reverse(idx) \ for ((idx) = nr_ioapics - 1; (idx) >= 0; (idx)--) #define for_each_pin(idx, pin) \ for ((pin) = 0; (pin) < ioapics[(idx)].nr_registers; (pin)++) #define for_each_ioapic_pin(idx, pin) \ for_each_ioapic((idx)) \ for_each_pin((idx), (pin)) #define for_each_irq_pin(entry, head) \ list_for_each_entry(entry, &head, list) static DEFINE_RAW_SPINLOCK(ioapic_lock); static DEFINE_MUTEX(ioapic_mutex); static unsigned int ioapic_dynirq_base; static int ioapic_initialized; struct irq_pin_list { struct list_head list; int apic, pin; }; struct mp_chip_data { struct list_head irq_2_pin; struct IO_APIC_route_entry entry; int trigger; int polarity; u32 count; bool isa_irq; }; struct mp_ioapic_gsi { u32 gsi_base; u32 gsi_end; }; static struct ioapic { /* * # of IRQ routing registers */ int nr_registers; /* * Saved state during suspend/resume, or while enabling intr-remap. */ struct IO_APIC_route_entry *saved_registers; /* I/O APIC config */ struct mpc_ioapic mp_config; /* IO APIC gsi routing info */ struct mp_ioapic_gsi gsi_config; struct ioapic_domain_cfg irqdomain_cfg; struct irq_domain *irqdomain; struct resource *iomem_res; } ioapics[MAX_IO_APICS]; #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver int mpc_ioapic_id(int ioapic_idx) { return ioapics[ioapic_idx].mp_config.apicid; } unsigned int mpc_ioapic_addr(int ioapic_idx) { return ioapics[ioapic_idx].mp_config.apicaddr; } static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) { return &ioapics[ioapic_idx].gsi_config; } static inline int mp_ioapic_pin_count(int ioapic) { struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1; } static inline u32 mp_pin_to_gsi(int ioapic, int pin) { return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin; } static inline bool mp_is_legacy_irq(int irq) { return irq >= 0 && irq < nr_legacy_irqs(); } /* * Initialize all legacy IRQs and all pins on the first IOAPIC * if we have legacy interrupt controller. Kernel boot option "pirq=" * may rely on non-legacy pins on the first IOAPIC. */ static inline int mp_init_irq_at_boot(int ioapic, int irq) { if (!nr_legacy_irqs()) return 0; return ioapic == 0 || mp_is_legacy_irq(irq); } static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic) { return ioapics[ioapic].irqdomain; } int nr_ioapics; /* The one past the highest gsi number used */ u32 gsi_top; /* MP IRQ source entries */ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; #ifdef CONFIG_EISA int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int skip_ioapic_setup; /** * disable_ioapic_support() - disables ioapic support at runtime */ void disable_ioapic_support(void) { #ifdef CONFIG_PCI noioapicquirk = 1; noioapicreroute = -1; #endif skip_ioapic_setup = 1; } static int __init parse_noapic(char *str) { /* disable IO-APIC */ disable_ioapic_support(); return 0; } early_param("noapic", parse_noapic); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) { int i; apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, m->srcbusirq, m->dstapic, m->dstirq); for (i = 0; i < mp_irq_entries; i++) { if (!memcmp(&mp_irqs[i], m, sizeof(*m))) return; } memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } static void alloc_ioapic_saved_registers(int idx) { size_t size; if (ioapics[idx].saved_registers) return; size = sizeof(struct IO_APIC_route_entry) * ioapics[idx].nr_registers; ioapics[idx].saved_registers = kzalloc(size, GFP_KERNEL); if (!ioapics[idx].saved_registers) pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); } static void free_ioapic_saved_registers(int idx) { kfree(ioapics[idx].saved_registers); ioapics[idx].saved_registers = NULL; } int __init arch_early_ioapic_init(void) { int i; if (!nr_legacy_irqs()) io_apic_irqs = ~0UL; for_each_ioapic(i) alloc_ioapic_saved_registers(i); return 0; } struct io_apic { unsigned int index; unsigned int unused[3]; unsigned int data; unsigned int unused2[11]; unsigned int eoi; }; static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + (mpc_ioapic_addr(idx) & ~PAGE_MASK); } static inline void io_apic_eoi(unsigned int apic, unsigned int vector) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(vector, &io_apic->eoi); } unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(reg, &io_apic->index); return readl(&io_apic->data); } static void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(reg, &io_apic->index); writel(value, &io_apic->data); } union entry_union { struct { u32 w1, w2; }; struct IO_APIC_route_entry entry; }; static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) { union entry_union eu; eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); return eu.entry; } static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) { union entry_union eu; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); eu.entry = __ioapic_read_entry(apic, pin); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return eu.entry; } /* * When we write a new IO APIC routing entry, we need to write the high * word first! If the mask bit in the low word is clear, we will enable * the interrupt, and we need to make sure the entry is fully populated * before that happens. */ static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { union entry_union eu = {{0, 0}}; eu.entry = e; io_apic_write(apic, 0x11 + 2*pin, eu.w2); io_apic_write(apic, 0x10 + 2*pin, eu.w1); } static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); __ioapic_write_entry(apic, pin, e); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * When we mask an IO APIC routing entry, we need to write the low * word first, in order to set the mask bit before we change the * high bits! */ static void ioapic_mask_entry(int apic, int pin) { unsigned long flags; union entry_union eu = { .entry.mask = IOAPIC_MASKED }; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x10 + 2*pin, eu.w1); io_apic_write(apic, 0x11 + 2*pin, eu.w2); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ static int __add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin) { struct irq_pin_list *entry; /* don't allow duplicates */ for_each_irq_pin(entry, data->irq_2_pin) if (entry->apic == apic && entry->pin == pin) return 0; entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node); if (!entry) { pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", node, apic, pin); return -ENOMEM; } entry->apic = apic; entry->pin = pin; list_add_tail(&entry->list, &data->irq_2_pin); return 0; } static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin) { struct irq_pin_list *tmp, *entry; list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list) if (entry->apic == apic && entry->pin == pin) { list_del(&entry->list); kfree(entry); return; } } static void add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin) { if (__add_pin_to_irq_node(data, node, apic, pin)) panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); } /* * Reroute an IRQ to a different pin. */ static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node, int oldapic, int oldpin, int newapic, int newpin) { struct irq_pin_list *entry; for_each_irq_pin(entry, data->irq_2_pin) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; /* every one is different, right? */ return; } } /* old apic/pin didn't exist, so just add new ones */ add_pin_to_irq_node(data, node, newapic, newpin); } static void io_apic_modify_irq(struct mp_chip_data *data, int mask_and, int mask_or, void (*final)(struct irq_pin_list *entry)) { union entry_union eu; struct irq_pin_list *entry; eu.entry = data->entry; eu.w1 &= mask_and; eu.w1 |= mask_or; data->entry = eu.entry; for_each_irq_pin(entry, data->irq_2_pin) { io_apic_write(entry->apic, 0x10 + 2 * entry->pin, eu.w1); if (final) final(entry); } } static void io_apic_sync(struct irq_pin_list *entry) { /* * Synchronize the IO-APIC and the CPU by doing * a dummy read from the IO-APIC */ struct io_apic __iomem *io_apic; io_apic = io_apic_base(entry->apic); readl(&io_apic->data); } static void mask_ioapic_irq(struct irq_data *irq_data) { struct mp_chip_data *data = irq_data->chip_data; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_modify_irq(data, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void __unmask_ioapic(struct mp_chip_data *data) { io_apic_modify_irq(data, ~IO_APIC_REDIR_MASKED, 0, NULL); } static void unmask_ioapic_irq(struct irq_data *irq_data) { struct mp_chip_data *data = irq_data->chip_data; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); __unmask_ioapic(data); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * IO-APIC versions below 0x20 don't support EOI register. * For the record, here is the information about various versions: * 0Xh 82489DX * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant * 2Xh I/O(x)APIC which is PCI 2.2 Compliant * 30h-FFh Reserved * * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic * version as 0x2. This is an error with documentation and these ICH chips * use io-apic's of version 0x20. * * For IO-APIC's with EOI register, we use that to do an explicit EOI. * Otherwise, we simulate the EOI message manually by changing the trigger * mode to edge and then back to level, with RTE being masked during this. */ static void __eoi_ioapic_pin(int apic, int pin, int vector) { if (mpc_ioapic_ver(apic) >= 0x20) { io_apic_eoi(apic, vector); } else { struct IO_APIC_route_entry entry, entry1; entry = entry1 = __ioapic_read_entry(apic, pin); /* * Mask the entry and change the trigger mode to edge. */ entry1.mask = IOAPIC_MASKED; entry1.trigger = IOAPIC_EDGE; __ioapic_write_entry(apic, pin, entry1); /* * Restore the previous level triggered entry. */ __ioapic_write_entry(apic, pin, entry); } } static void eoi_ioapic_pin(int vector, struct mp_chip_data *data) { unsigned long flags; struct irq_pin_list *entry; raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, data->irq_2_pin) __eoi_ioapic_pin(entry->apic, entry->pin, vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; /* * Make sure the entry is masked and re-read the contents to check * if it is a level triggered pin and if the remote-IRR is set. */ if (entry.mask == IOAPIC_UNMASKED) { entry.mask = IOAPIC_MASKED; ioapic_write_entry(apic, pin, entry); entry = ioapic_read_entry(apic, pin); } if (entry.irr) { unsigned long flags; /* * Make sure the trigger mode is set to level. Explicit EOI * doesn't clear the remote-IRR if the trigger mode is not * set to level. */ if (entry.trigger == IOAPIC_EDGE) { entry.trigger = IOAPIC_LEVEL; ioapic_write_entry(apic, pin, entry); } raw_spin_lock_irqsave(&ioapic_lock, flags); __eoi_ioapic_pin(apic, pin, entry.vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * Clear the rest of the bits in the IO-APIC RTE except for the mask * bit. */ ioapic_mask_entry(apic, pin); entry = ioapic_read_entry(apic, pin); if (entry.irr) pr_err("Unable to reset IRR for apic: %d, pin :%d\n", mpc_ioapic_id(apic), pin); } void clear_IO_APIC (void) { int apic, pin; for_each_ioapic_pin(apic, pin) clear_IO_APIC_pin(apic, pin); } #ifdef CONFIG_X86_32 /* * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to * specific CPU-side IRQs. */ #define MAX_PIRQS 8 static int pirq_entries[MAX_PIRQS] = { [0 ... MAX_PIRQS - 1] = -1 }; static int __init ioapic_pirq_setup(char *str) { int i, max; int ints[MAX_PIRQS+1]; get_options(str, ARRAY_SIZE(ints), ints); apic_printk(APIC_VERBOSE, KERN_INFO "PIRQ redirection, working around broken MP-BIOS.\n"); max = MAX_PIRQS; if (ints[0] < MAX_PIRQS) max = ints[0]; for (i = 0; i < max; i++) { apic_printk(APIC_VERBOSE, KERN_DEBUG "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); /* * PIRQs are mapped upside down, usually. */ pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; } return 1; } __setup("pirq=", ioapic_pirq_setup); #endif /* CONFIG_X86_32 */ /* * Saves all the IO-APIC RTE's */ int save_ioapic_entries(void) { int apic, pin; int err = 0; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) { err = -ENOMEM; continue; } for_each_pin(apic, pin) ioapics[apic].saved_registers[pin] = ioapic_read_entry(apic, pin); } return err; } /* * Mask all IO APIC entries. */ void mask_ioapic_entries(void) { int apic, pin; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) continue; for_each_pin(apic, pin) { struct IO_APIC_route_entry entry; entry = ioapics[apic].saved_registers[pin]; if (entry.mask == IOAPIC_UNMASKED) { entry.mask = IOAPIC_MASKED; ioapic_write_entry(apic, pin, entry); } } } } /* * Restore IO APIC entries which was saved in the ioapic structure. */ int restore_ioapic_entries(void) { int apic, pin; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) continue; for_each_pin(apic, pin) ioapic_write_entry(apic, pin, ioapics[apic].saved_registers[pin]); } return 0; } /* * Find the IRQ entry number of a certain pin. */ static int find_irq_entry(int ioapic_idx, int pin, int type) { int i; for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].irqtype == type && (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || mp_irqs[i].dstapic == MP_APIC_ALL) && mp_irqs[i].dstirq == pin) return i; return -1; } /* * Find the pin to which IRQ[irq] (ISA) is connected */ static int __init find_isa_irq_pin(int irq, int type) { int i; for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && (mp_irqs[i].srcbusirq == irq)) return mp_irqs[i].dstirq; } return -1; } static int __init find_isa_irq_apic(int irq, int type) { int i; for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && (mp_irqs[i].srcbusirq == irq)) break; } if (i < mp_irq_entries) { int ioapic_idx; for_each_ioapic(ioapic_idx) if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) return ioapic_idx; } return -1; } #ifdef CONFIG_EISA /* * EISA Edge/Level control register, ELCR */ static int EISA_ELCR(unsigned int irq) { if (irq < nr_legacy_irqs()) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } apic_printk(APIC_VERBOSE, KERN_INFO "Broken MPtable reports ISA irq %d\n", irq); return 0; } #endif /* ISA interrupts are always active high edge triggered, * when listed as conforming in the MP table. */ #define default_ISA_trigger(idx) (IOAPIC_EDGE) #define default_ISA_polarity(idx) (IOAPIC_POL_HIGH) /* EISA interrupts are always polarity zero and can be edge or level * trigger depending on the ELCR value. If an interrupt is listed as * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always active low level triggered, * when listed as conforming in the MP table. */ #define default_PCI_trigger(idx) (IOAPIC_LEVEL) #define default_PCI_polarity(idx) (IOAPIC_POL_LOW) static int irq_polarity(int idx) { int bus = mp_irqs[idx].srcbus; /* * Determine IRQ line polarity (high active or low active): */ switch (mp_irqs[idx].irqflag & MP_IRQPOL_MASK) { case MP_IRQPOL_DEFAULT: /* conforms to spec, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) return default_ISA_polarity(idx); else return default_PCI_polarity(idx); case MP_IRQPOL_ACTIVE_HIGH: return IOAPIC_POL_HIGH; case MP_IRQPOL_RESERVED: pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n"); case MP_IRQPOL_ACTIVE_LOW: default: /* Pointless default required due to do gcc stupidity */ return IOAPIC_POL_LOW; } } #ifdef CONFIG_EISA static int eisa_irq_trigger(int idx, int bus, int trigger) { switch (mp_bus_id_to_type[bus]) { case MP_BUS_PCI: case MP_BUS_ISA: return trigger; case MP_BUS_EISA: return default_EISA_trigger(idx); } pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus); return IOAPIC_LEVEL; } #else static inline int eisa_irq_trigger(int idx, int bus, int trigger) { return trigger; } #endif static int irq_trigger(int idx) { int bus = mp_irqs[idx].srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ switch (mp_irqs[idx].irqflag & MP_IRQTRIG_MASK) { case MP_IRQTRIG_DEFAULT: /* conforms to spec, ie. bus-type dependent trigger mode */ if (test_bit(bus, mp_bus_not_pci)) trigger = default_ISA_trigger(idx); else trigger = default_PCI_trigger(idx); /* Take EISA into account */ return eisa_irq_trigger(idx, bus, trigger); case MP_IRQTRIG_EDGE: return IOAPIC_EDGE; case MP_IRQTRIG_RESERVED: pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n"); case MP_IRQTRIG_LEVEL: default: /* Pointless default required due to do gcc stupidity */ return IOAPIC_LEVEL; } } void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node, int trigger, int polarity) { init_irq_alloc_info(info, NULL); info->type = X86_IRQ_ALLOC_TYPE_IOAPIC; info->ioapic_node = node; info->ioapic_trigger = trigger; info->ioapic_polarity = polarity; info->ioapic_valid = 1; } #ifndef CONFIG_ACPI int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity); #endif static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst, struct irq_alloc_info *src, u32 gsi, int ioapic_idx, int pin) { int trigger, polarity; copy_irq_alloc_info(dst, src); dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC; dst->ioapic_id = mpc_ioapic_id(ioapic_idx); dst->ioapic_pin = pin; dst->ioapic_valid = 1; if (src && src->ioapic_valid) { dst->ioapic_node = src->ioapic_node; dst->ioapic_trigger = src->ioapic_trigger; dst->ioapic_polarity = src->ioapic_polarity; } else { dst->ioapic_node = NUMA_NO_NODE; if (acpi_get_override_irq(gsi, &trigger, &polarity) >= 0) { dst->ioapic_trigger = trigger; dst->ioapic_polarity = polarity; } else { /* * PCI interrupts are always active low level * triggered. */ dst->ioapic_trigger = IOAPIC_LEVEL; dst->ioapic_polarity = IOAPIC_POL_LOW; } } } static int ioapic_alloc_attr_node(struct irq_alloc_info *info) { return (info && info->ioapic_valid) ? info->ioapic_node : NUMA_NO_NODE; } static void mp_register_handler(unsigned int irq, unsigned long trigger) { irq_flow_handler_t hdl; bool fasteoi; if (trigger) { irq_set_status_flags(irq, IRQ_LEVEL); fasteoi = true; } else { irq_clear_status_flags(irq, IRQ_LEVEL); fasteoi = false; } hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; __irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge"); } static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info) { struct mp_chip_data *data = irq_get_chip_data(irq); /* * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger * and polarity attirbutes. So allow the first user to reprogram the * pin with real trigger and polarity attributes. */ if (irq < nr_legacy_irqs() && data->count == 1) { if (info->ioapic_trigger != data->trigger) mp_register_handler(irq, info->ioapic_trigger); data->entry.trigger = data->trigger = info->ioapic_trigger; data->entry.polarity = data->polarity = info->ioapic_polarity; } return data->trigger == info->ioapic_trigger && data->polarity == info->ioapic_polarity; } static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi, struct irq_alloc_info *info) { bool legacy = false; int irq = -1; int type = ioapics[ioapic].irqdomain_cfg.type; switch (type) { case IOAPIC_DOMAIN_LEGACY: /* * Dynamically allocate IRQ number for non-ISA IRQs in the first * 16 GSIs on some weird platforms. */ if (!ioapic_initialized || gsi >= nr_legacy_irqs()) irq = gsi; legacy = mp_is_legacy_irq(irq); break; case IOAPIC_DOMAIN_STRICT: irq = gsi; break; case IOAPIC_DOMAIN_DYNAMIC: break; default: WARN(1, "ioapic: unknown irqdomain type %d\n", type); return -1; } return __irq_domain_alloc_irqs(domain, irq, 1, ioapic_alloc_attr_node(info), info, legacy, NULL); } /* * Need special handling for ISA IRQs because there may be multiple IOAPIC pins * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H). * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and * some BIOSes may use MP Interrupt Source records to override IRQ numbers for * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be * multiple pins sharing the same legacy IRQ number when ACPI is disabled. */ static int alloc_isa_irq_from_domain(struct irq_domain *domain, int irq, int ioapic, int pin, struct irq_alloc_info *info) { struct mp_chip_data *data; struct irq_data *irq_data = irq_get_irq_data(irq); int node = ioapic_alloc_attr_node(info); /* * Legacy ISA IRQ has already been allocated, just add pin to * the pin list assoicated with this IRQ and program the IOAPIC * entry. The IOAPIC entry */ if (irq_data && irq_data->parent_data) { if (!mp_check_pin_attr(irq, info)) return -EBUSY; if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic_pin)) return -ENOMEM; } else { info->flags |= X86_IRQ_ALLOC_LEGACY; irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true, NULL); if (irq >= 0) { irq_data = irq_domain_get_irq_data(domain, irq); data = irq_data->chip_data; data->isa_irq = true; } } return irq; } static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, unsigned int flags, struct irq_alloc_info *info) { int irq; bool legacy = false; struct irq_alloc_info tmp; struct mp_chip_data *data; struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); if (!domain) return -ENOSYS; if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) { irq = mp_irqs[idx].srcbusirq; legacy = mp_is_legacy_irq(irq); /* * IRQ2 is unusable for historical reasons on systems which * have a legacy PIC. See the comment vs. IRQ2 further down. * * If this gets removed at some point then the related code * in lapic_assign_system_vectors() needs to be adjusted as * well. */ if (legacy && irq == PIC_CASCADE_IR) return -EINVAL; } mutex_lock(&ioapic_mutex); if (!(flags & IOAPIC_MAP_ALLOC)) { if (!legacy) { irq = irq_find_mapping(domain, pin); if (irq == 0) irq = -ENOENT; } } else { ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin); if (legacy) irq = alloc_isa_irq_from_domain(domain, irq, ioapic, pin, &tmp); else if ((irq = irq_find_mapping(domain, pin)) == 0) irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp); else if (!mp_check_pin_attr(irq, &tmp)) irq = -EBUSY; if (irq >= 0) { data = irq_get_chip_data(irq); data->count++; } } mutex_unlock(&ioapic_mutex); return irq; } static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) { u32 gsi = mp_pin_to_gsi(ioapic, pin); /* * Debugging check, we are in big trouble if this message pops up! */ if (mp_irqs[idx].dstirq != pin) pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); #ifdef CONFIG_X86_32 /* * PCI IRQ command line redirection. Yes, limits are hardcoded. */ if ((pin >= 16) && (pin <= 23)) { if (pirq_entries[pin-16] != -1) { if (!pirq_entries[pin-16]) { apic_printk(APIC_VERBOSE, KERN_DEBUG "disabling PIRQ%d\n", pin-16); } else { int irq = pirq_entries[pin-16]; apic_printk(APIC_VERBOSE, KERN_DEBUG "using PIRQ%d -> IRQ %d\n", pin-16, irq); return irq; } } } #endif return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL); } int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info) { int ioapic, pin, idx; ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return -ENODEV; pin = mp_find_ioapic_pin(ioapic, gsi); idx = find_irq_entry(ioapic, pin, mp_INT); if ((flags & IOAPIC_MAP_CHECK) && idx < 0) return -ENODEV; return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info); } void mp_unmap_irq(int irq) { struct irq_data *irq_data = irq_get_irq_data(irq); struct mp_chip_data *data; if (!irq_data || !irq_data->domain) return; data = irq_data->chip_data; if (!data || data->isa_irq) return; mutex_lock(&ioapic_mutex); if (--data->count == 0) irq_domain_free_irqs(irq, 1); mutex_unlock(&ioapic_mutex); } /* * Find a specific PCI IRQ entry. * Not an __init, possibly needed by modules */ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) { int irq, i, best_ioapic = -1, best_idx = -1; apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; int ioapic_idx, found = 0; if (bus != lbus || mp_irqs[i].irqtype != mp_INT || slot != ((mp_irqs[i].srcbusirq >> 2) & 0x1f)) continue; for_each_ioapic(ioapic_idx) if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || mp_irqs[i].dstapic == MP_APIC_ALL) { found = 1; break; } if (!found) continue; /* Skip ISA IRQs */ irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq, 0); if (irq > 0 && !IO_APIC_IRQ(irq)) continue; if (pin == (mp_irqs[i].srcbusirq & 3)) { best_idx = i; best_ioapic = ioapic_idx; goto out; } /* * Use the first all-but-pin matching entry as a * best-guess fuzzy result for broken mptables. */ if (best_idx < 0) { best_idx = i; best_ioapic = ioapic_idx; } } if (best_idx < 0) return -1; out: return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq, IOAPIC_MAP_ALLOC); } EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); static struct irq_chip ioapic_chip, ioapic_ir_chip; static void __init setup_IO_APIC_irqs(void) { unsigned int ioapic, pin; int idx; apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); for_each_ioapic_pin(ioapic, pin) { idx = find_irq_entry(ioapic, pin, mp_INT); if (idx < 0) apic_printk(APIC_VERBOSE, KERN_DEBUG " apic %d pin %d not connected\n", mpc_ioapic_id(ioapic), pin); else pin_2_irq(idx, ioapic, pin, ioapic ? 0 : IOAPIC_MAP_ALLOC); } } void ioapic_zap_locks(void) { raw_spin_lock_init(&ioapic_lock); } static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries) { int i; char buf[256]; struct IO_APIC_route_entry entry; struct IR_IO_APIC_route_entry *ir_entry = (void *)&entry; printk(KERN_DEBUG "IOAPIC %d:\n", apic); for (i = 0; i <= nr_entries; i++) { entry = ioapic_read_entry(apic, i); snprintf(buf, sizeof(buf), " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)", i, entry.mask == IOAPIC_MASKED ? "disabled" : "enabled ", entry.trigger == IOAPIC_LEVEL ? "level" : "edge ", entry.polarity == IOAPIC_POL_LOW ? "low " : "high", entry.vector, entry.irr, entry.delivery_status); if (ir_entry->format) printk(KERN_DEBUG "%s, remapped, I(%04X), Z(%X)\n", buf, (ir_entry->index2 << 15) | ir_entry->index, ir_entry->zero); else printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n", buf, entry.dest_mode == IOAPIC_DEST_MODE_LOGICAL ? "logical " : "physical", entry.dest, entry.delivery_mode); } } static void __init print_IO_APIC(int ioapic_idx) { union IO_APIC_reg_00 reg_00; union IO_APIC_reg_01 reg_01; union IO_APIC_reg_02 reg_02; union IO_APIC_reg_03 reg_03; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); reg_01.raw = io_apic_read(ioapic_idx, 1); if (reg_01.bits.version >= 0x10) reg_02.raw = io_apic_read(ioapic_idx, 2); if (reg_01.bits.version >= 0x20) reg_03.raw = io_apic_read(ioapic_idx, 3); raw_spin_unlock_irqrestore(&ioapic_lock, flags); printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); printk(KERN_DEBUG "....... : max redirection entries: %02X\n", reg_01.bits.entries); printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); printk(KERN_DEBUG "....... : IO APIC version: %02X\n", reg_01.bits.version); /* * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, * but the value of reg_02 is read as the previous read register * value, so ignore it if reg_02 == reg_01. */ if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); } /* * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 * or reg_03, but the value of reg_0[23] is read as the previous read * register value, so ignore it if reg_03 == reg_0[12]. */ if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && reg_03.raw != reg_01.raw) { printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); } printk(KERN_DEBUG ".... IRQ redirection table:\n"); io_apic_print_entries(ioapic_idx, reg_01.bits.entries); } void __init print_IO_APICs(void) { int ioapic_idx; unsigned int irq; printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for_each_ioapic(ioapic_idx) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mpc_ioapic_id(ioapic_idx), ioapics[ioapic_idx].nr_registers); /* * We are a bit conservative about what we expect. We have to * know about every hardware change ASAP. */ printk(KERN_INFO "testing the IO APIC.......................\n"); for_each_ioapic(ioapic_idx) print_IO_APIC(ioapic_idx); printk(KERN_DEBUG "IRQ to pin mappings:\n"); for_each_active_irq(irq) { struct irq_pin_list *entry; struct irq_chip *chip; struct mp_chip_data *data; chip = irq_get_chip(irq); if (chip != &ioapic_chip && chip != &ioapic_ir_chip) continue; data = irq_get_chip_data(irq); if (!data) continue; if (list_empty(&data->irq_2_pin)) continue; printk(KERN_DEBUG "IRQ%d ", irq); for_each_irq_pin(entry, data->irq_2_pin) pr_cont("-> %d:%d", entry->apic, entry->pin); pr_cont("\n"); } printk(KERN_INFO ".................................... done.\n"); } /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; void __init enable_IO_APIC(void) { int i8259_apic, i8259_pin; int apic, pin; if (skip_ioapic_setup) nr_ioapics = 0; if (!nr_legacy_irqs() || !nr_ioapics) return; for_each_ioapic_pin(apic, pin) { /* See if any of the pins is in ExtINT mode */ struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin); /* If the interrupt line is enabled and in ExtInt mode * I have found the pin where the i8259 is connected. */ if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { ioapic_i8259.apic = apic; ioapic_i8259.pin = pin; goto found_i8259; } } found_i8259: /* Look to see what if the MP table has reported the ExtINT */ /* If we could not find the appropriate pin by looking at the ioapic * the i8259 probably is not connected the ioapic but give the * mptable a chance anyway. */ i8259_pin = find_isa_irq_pin(0, mp_ExtINT); i8259_apic = find_isa_irq_apic(0, mp_ExtINT); /* Trust the MP table if nothing is setup in the hardware */ if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); ioapic_i8259.pin = i8259_pin; ioapic_i8259.apic = i8259_apic; } /* Complain if the MP table and the hardware disagree */ if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) { printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); } /* * Do not trust the IO-APIC being empty at bootup */ clear_IO_APIC(); } void native_restore_boot_irq_mode(void) { /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode * so legacy interrupts can be delivered. */ if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); entry.mask = IOAPIC_UNMASKED; entry.trigger = IOAPIC_EDGE; entry.polarity = IOAPIC_POL_HIGH; entry.dest_mode = IOAPIC_DEST_MODE_PHYSICAL; entry.delivery_mode = dest_ExtINT; entry.dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } if (boot_cpu_has(X86_FEATURE_APIC) || apic_from_smp_config()) disconnect_bsp_APIC(ioapic_i8259.pin != -1); } void restore_boot_irq_mode(void) { if (!nr_legacy_irqs()) return; x86_apic_ops.restore(); } #ifdef CONFIG_X86_32 /* * function to set the IO-APIC physical IDs based on the * values stored in the MPC table. * * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 */ void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; int ioapic_idx; int i; unsigned char old_id; unsigned long flags; /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. */ apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map); /* * Set the IOAPIC ID to the value stored in the MPC table. */ for_each_ioapic(ioapic_idx) { /* Read the register 0 value */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); old_id = mpc_ioapic_id(ioapic_idx); if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", ioapic_idx, mpc_ioapic_id(ioapic_idx)); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; } /* * Sanity check, is the ID really free? Every APIC in a * system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (apic->check_apicid_used(&phys_id_present_map, mpc_ioapic_id(ioapic_idx))) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", ioapic_idx, mpc_ioapic_id(ioapic_idx)); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; if (i >= get_physical_broadcast()) panic("Max APIC ID exceeded!\n"); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); ioapics[ioapic_idx].mp_config.apicid = i; } else { physid_mask_t tmp; apic->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx), &tmp); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", mpc_ioapic_id(ioapic_idx)); physids_or(phys_id_present_map, phys_id_present_map, tmp); } /* * We need to adjust the IRQ routing table * if the ID changed. */ if (old_id != mpc_ioapic_id(ioapic_idx)) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].dstapic == old_id) mp_irqs[i].dstapic = mpc_ioapic_id(ioapic_idx); /* * Update the ID register according to the right value * from the MPC table if they are different. */ if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) continue; apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mpc_ioapic_id(ioapic_idx)); reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic_idx, 0, reg_00.raw); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* * Sanity check */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) pr_cont("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); } } void __init setup_ioapic_ids_from_mpc(void) { if (acpi_ioapic) return; /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. */ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) || APIC_XAPIC(boot_cpu_apic_version)) return; setup_ioapic_ids_from_mpc_nocheck(); } #endif int no_timer_check __initdata; static int __init notimercheck(char *s) { no_timer_check = 1; return 1; } __setup("no_timer_check", notimercheck); static void __init delay_with_tsc(void) { unsigned long long start, now; unsigned long end = jiffies + 4; start = rdtsc(); /* * We don't know the TSC frequency yet, but waiting for * 40000000000/HZ TSC cycles is safe: * 4 GHz == 10 jiffies * 1 GHz == 40 jiffies */ do { rep_nop(); now = rdtsc(); } while ((now - start) < 40000000000ULL / HZ && time_before_eq(jiffies, end)); } static void __init delay_without_tsc(void) { unsigned long end = jiffies + 4; int band = 1; /* * We don't know any frequency yet, but waiting for * 40940000000/HZ cycles is safe: * 4 GHz == 10 jiffies * 1 GHz == 40 jiffies * 1 << 1 + 1 << 2 +...+ 1 << 11 = 4094 */ do { __delay(((1U << band++) * 10000000UL) / HZ); } while (band < 12 && time_before_eq(jiffies, end)); } /* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: * * - timer IRQ defaults to IO-APIC IRQ * - if this function detects that timer IRQs are defunct, then we fall * back to ISA timer IRQs */ static int __init timer_irq_works(void) { unsigned long t1 = jiffies; unsigned long flags; if (no_timer_check) return 1; local_save_flags(flags); local_irq_enable(); if (boot_cpu_has(X86_FEATURE_TSC)) delay_with_tsc(); else delay_without_tsc(); local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible * glue logic does not lock up after one or two first * ticks in a non-ExtINT mode. Also the local APIC * might have cached one ExtINT interrupt. Finally, at * least one tick may be lost due to delays. */ /* jiffies wrap? */ if (time_after(jiffies, t1 + 4)) return 1; return 0; } /* * In the SMP+IOAPIC case it might happen that there are an unspecified * number of pending IRQ events unhandled. These cases are very rare, * so we 'resend' these IRQs via IPIs, to the same CPU. It's much * better to do it this way as thus we do not have to be aware of * 'pending' interrupts in the IRQ path, except at this point. */ /* * Edge triggered needs to resend any interrupt * that was delayed but this is now handled in the device * independent code. */ /* * Starting up a edge-triggered IO-APIC interrupt is * nasty - we need to make sure that we get the edge. * If it is already asserted for some reason, we need * return 1 to indicate that is was pending. * * This is not complete - we should be able to fake * an edge even if it isn't on the 8259A... */ static unsigned int startup_ioapic_irq(struct irq_data *data) { int was_pending = 0, irq = data->irq; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); if (irq < nr_legacy_irqs()) { legacy_pic->mask(irq); if (legacy_pic->irq_pending(irq)) was_pending = 1; } __unmask_ioapic(data->chip_data); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return was_pending; } atomic_t irq_mis_count; #ifdef CONFIG_GENERIC_PENDING_IRQ static bool io_apic_level_ack_pending(struct mp_chip_data *data) { struct irq_pin_list *entry; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, data->irq_2_pin) { unsigned int reg; int pin; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ if (reg & IO_APIC_REDIR_REMOTE_IRR) { raw_spin_unlock_irqrestore(&ioapic_lock, flags); return true; } } raw_spin_unlock_irqrestore(&ioapic_lock, flags); return false; } static inline bool ioapic_irqd_mask(struct irq_data *data) { /* If we are moving the IRQ we need to mask it */ if (unlikely(irqd_is_setaffinity_pending(data))) { if (!irqd_irq_masked(data)) mask_ioapic_irq(data); return true; } return false; } static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked) { if (unlikely(masked)) { /* Only migrate the irq if the ack has been received. * * On rare occasions the broadcast level triggered ack gets * delayed going to ioapics, and if we reprogram the * vector while Remote IRR is still set the irq will never * fire again. * * To prevent this scenario we read the Remote IRR bit * of the ioapic. This has two effects. * - On any sane system the read of the ioapic will * flush writes (and acks) going to the ioapic from * this cpu. * - We get to see if the ACK has actually been delivered. * * Based on failed experiments of reprogramming the * ioapic entry from outside of irq context starting * with masking the ioapic entry and then polling until * Remote IRR was clear before reprogramming the * ioapic I don't trust the Remote IRR bit to be * completey accurate. * * However there appears to be no other way to plug * this race, so if the Remote IRR bit is not * accurate and is causing problems then it is a hardware bug * and you can go talk to the chipset vendor about it. */ if (!io_apic_level_ack_pending(data->chip_data)) irq_move_masked_irq(data); /* If the IRQ is masked in the core, leave it: */ if (!irqd_irq_masked(data)) unmask_ioapic_irq(data); } } #else static inline bool ioapic_irqd_mask(struct irq_data *data) { return false; } static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked) { } #endif static void ioapic_ack_level(struct irq_data *irq_data) { struct irq_cfg *cfg = irqd_cfg(irq_data); unsigned long v; bool masked; int i; irq_complete_move(cfg); masked = ioapic_irqd_mask(irq_data); /* * It appears there is an erratum which affects at least version 0x11 * of I/O APIC (that's the 82093AA and cores integrated into various * chipsets). Under certain conditions a level-triggered interrupt is * erroneously delivered as edge-triggered one but the respective IRR * bit gets set nevertheless. As a result the I/O unit expects an EOI * message but it will never arrive and further interrupts are blocked * from the source. The exact reason is so far unknown, but the * phenomenon was observed when two consecutive interrupt requests * from a given source get delivered to the same CPU and the source is * temporarily disabled in between. * * A workaround is to simulate an EOI message manually. We achieve it * by setting the trigger mode to edge and then to level when the edge * trigger mode gets detected in the TMR of a local APIC for a * level-triggered interrupt. We mask the source for the time of the * operation to prevent an edge-triggered interrupt escaping meanwhile. * The idea is from Manfred Spraul. --macro * * Also in the case when cpu goes offline, fixup_irqs() will forward * any unhandled interrupt on the offlined cpu to the new cpu * destination that is handling the corresponding interrupt. This * interrupt forwarding is done via IPI's. Hence, in this case also * level-triggered io-apic interrupt will be seen as an edge * interrupt in the IRR. And we can't rely on the cpu's EOI * to be broadcasted to the IO-APIC's which will clear the remoteIRR * corresponding to the level-triggered interrupt. Hence on IO-APIC's * supporting EOI register, we do an explicit EOI to clear the * remote IRR and on IO-APIC's which don't have an EOI register, * we use the above logic (mask+edge followed by unmask+level) from * Manfred Spraul to clear the remote IRR. */ i = cfg->vector; v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); /* * We must acknowledge the irq before we move it or the acknowledge will * not propagate properly. */ ack_APIC_irq(); /* * Tail end of clearing remote IRR bit (either by delivering the EOI * message via io-apic EOI register write or simulating it using * mask+edge followed by unnask+level logic) manually when the * level triggered interrupt is seen as the edge triggered interrupt * at the cpu. */ if (!(v & (1 << (i & 0x1f)))) { atomic_inc(&irq_mis_count); eoi_ioapic_pin(cfg->vector, irq_data->chip_data); } ioapic_irqd_unmask(irq_data, masked); } static void ioapic_ir_ack_level(struct irq_data *irq_data) { struct mp_chip_data *data = irq_data->chip_data; /* * Intr-remapping uses pin number as the virtual vector * in the RTE. Actual vector is programmed in * intr-remapping table entry. Hence for the io-apic * EOI we use the pin number. */ apic_ack_irq(irq_data); eoi_ioapic_pin(data->entry.vector, data); } static void ioapic_configure_entry(struct irq_data *irqd) { struct mp_chip_data *mpd = irqd->chip_data; struct irq_cfg *cfg = irqd_cfg(irqd); struct irq_pin_list *entry; /* * Only update when the parent is the vector domain, don't touch it * if the parent is the remapping domain. Check the installed * ioapic chip to verify that. */ if (irqd->chip == &ioapic_chip) { mpd->entry.dest = cfg->dest_apicid; mpd->entry.vector = cfg->vector; } for_each_irq_pin(entry, mpd->irq_2_pin) __ioapic_write_entry(entry->apic, entry->pin, mpd->entry); } static int ioapic_set_affinity(struct irq_data *irq_data, const struct cpumask *mask, bool force) { struct irq_data *parent = irq_data->parent_data; unsigned long flags; int ret; ret = parent->chip->irq_set_affinity(parent, mask, force); raw_spin_lock_irqsave(&ioapic_lock, flags); if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) ioapic_configure_entry(irq_data); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return ret; } /* * Interrupt shutdown masks the ioapic pin, but the interrupt might already * be in flight, but not yet serviced by the target CPU. That means * __synchronize_hardirq() would return and claim that everything is calmed * down. So free_irq() would proceed and deactivate the interrupt and free * resources. * * Once the target CPU comes around to service it it will find a cleared * vector and complain. While the spurious interrupt is harmless, the full * release of resources might prevent the interrupt from being acknowledged * which keeps the hardware in a weird state. * * Verify that the corresponding Remote-IRR bits are clear. */ static int ioapic_irq_get_chip_state(struct irq_data *irqd, enum irqchip_irq_state which, bool *state) { struct mp_chip_data *mcd = irqd->chip_data; struct IO_APIC_route_entry rentry; struct irq_pin_list *p; if (which != IRQCHIP_STATE_ACTIVE) return -EINVAL; *state = false; raw_spin_lock(&ioapic_lock); for_each_irq_pin(p, mcd->irq_2_pin) { rentry = __ioapic_read_entry(p->apic, p->pin); /* * The remote IRR is only valid in level trigger mode. It's * meaning is undefined for edge triggered interrupts and * irrelevant because the IO-APIC treats them as fire and * forget. */ if (rentry.irr && rentry.trigger) { *state = true; break; } } raw_spin_unlock(&ioapic_lock); return 0; } static struct irq_chip ioapic_chip __read_mostly = { .name = "IO-APIC", .irq_startup = startup_ioapic_irq, .irq_mask = mask_ioapic_irq, .irq_unmask = unmask_ioapic_irq, .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ack_level, .irq_set_affinity = ioapic_set_affinity, .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_get_irqchip_state = ioapic_irq_get_chip_state, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_AFFINITY_PRE_STARTUP, }; static struct irq_chip ioapic_ir_chip __read_mostly = { .name = "IR-IO-APIC", .irq_startup = startup_ioapic_irq, .irq_mask = mask_ioapic_irq, .irq_unmask = unmask_ioapic_irq, .irq_ack = irq_chip_ack_parent, .irq_eoi = ioapic_ir_ack_level, .irq_set_affinity = ioapic_set_affinity, .irq_retrigger = irq_chip_retrigger_hierarchy, .irq_get_irqchip_state = ioapic_irq_get_chip_state, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_AFFINITY_PRE_STARTUP, }; static inline void init_IO_APIC_traps(void) { struct irq_cfg *cfg; unsigned int irq; for_each_active_irq(irq) { cfg = irq_cfg(irq); if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { /* * Hmm.. We don't have an entry for this, * so default to an old-fashioned 8259 * interrupt if we can.. */ if (irq < nr_legacy_irqs()) legacy_pic->make_irq(irq); else /* Strange. Oh, well.. */ irq_set_chip(irq, &no_irq_chip); } } } /* * The local APIC irq-chip implementation: */ static void mask_lapic_irq(struct irq_data *data) { unsigned long v; v = apic_read(APIC_LVT0); apic_write(APIC_LVT0, v | APIC_LVT_MASKED); } static void unmask_lapic_irq(struct irq_data *data) { unsigned long v; v = apic_read(APIC_LVT0); apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); } static void ack_lapic_irq(struct irq_data *data) { ack_APIC_irq(); } static struct irq_chip lapic_chip __read_mostly = { .name = "local-APIC", .irq_mask = mask_lapic_irq, .irq_unmask = unmask_lapic_irq, .irq_ack = ack_lapic_irq, }; static void lapic_register_intr(int irq) { irq_clear_status_flags(irq, IRQ_LEVEL); irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, "edge"); } /* * This looks a bit hackish but it's about the only one way of sending * a few INTA cycles to 8259As and any associated glue logic. ICR does * not support the ExtINT mode, unfortunately. We need to send these * cycles as some i82489DX-based boards have glue logic that keeps the * 8259A interrupt line asserted until INTA. --macro */ static inline void __init unlock_ExtINT_logic(void) { int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; pin = find_isa_irq_pin(8, mp_INT); if (pin == -1) { WARN_ON_ONCE(1); return; } apic = find_isa_irq_apic(8, mp_INT); if (apic == -1) { WARN_ON_ONCE(1); return; } entry0 = ioapic_read_entry(apic, pin); clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); entry1.dest_mode = IOAPIC_DEST_MODE_PHYSICAL; entry1.mask = IOAPIC_UNMASKED; entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = IOAPIC_EDGE; entry1.vector = 0; ioapic_write_entry(apic, pin, entry1); save_control = CMOS_READ(RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, RTC_FREQ_SELECT); CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); i = 100; while (i-- > 0) { mdelay(10); if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) i -= 10; } CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); clear_IO_APIC_pin(apic, pin); ioapic_write_entry(apic, pin, entry0); } static int disable_timer_pin_1 __initdata; /* Actually the next is obsolete, but keep it for paranoid reasons -AK */ static int __init disable_timer_pin_setup(char *arg) { disable_timer_pin_1 = 1; return 0; } early_param("disable_timer_pin_1", disable_timer_pin_setup); static int mp_alloc_timer_irq(int ioapic, int pin) { int irq = -1; struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); if (domain) { struct irq_alloc_info info; ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0); info.ioapic_id = mpc_ioapic_id(ioapic); info.ioapic_pin = pin; mutex_lock(&ioapic_mutex); irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info); mutex_unlock(&ioapic_mutex); } return irq; } /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. * * FIXME: really need to revamp this for all platforms. */ static inline void __init check_timer(void) { struct irq_data *irq_data = irq_get_irq_data(0); struct mp_chip_data *data = irq_data->chip_data; struct irq_cfg *cfg = irqd_cfg(irq_data); int node = cpu_to_node(0); int apic1, pin1, apic2, pin2; unsigned long flags; int no_pin1 = 0; local_irq_save(flags); /* * get/set the timer IRQ vector: */ legacy_pic->mask(0); /* * As IRQ0 is to be enabled in the 8259A, the virtual * wire has to be disabled in the local APIC. Also * timer interrupts need to be acknowledged manually in * the 8259A for the i82489DX when using the NMI * watchdog as that APIC treats NMIs as level-triggered. * The AEOI mode will finish them in the 8259A * automatically. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); legacy_pic->init(1); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " "apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); /* * Some BIOS writers are clueless and report the ExtINTA * I/O APIC input from the cascaded 8259A as the timer * interrupt input. So just in case, if only one pin * was found above, try it both directly and through the * 8259A. */ if (pin1 == -1) { panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC"); pin1 = pin2; apic1 = apic2; no_pin1 = 1; } else if (pin2 == -1) { pin2 = pin1; apic2 = apic1; } if (pin1 != -1) { /* Ok, does IRQ0 through the IOAPIC work? */ if (no_pin1) { mp_alloc_timer_irq(apic1, pin1); } else { /* * for edge trigger, it's already unmasked, * so only need to unmask if it is level-trigger * do we really have level trigger timer? */ int idx; idx = find_irq_entry(apic1, pin1, mp_INT); if (idx != -1 && irq_trigger(idx)) unmask_ioapic_irq(irq_get_irq_data(0)); } irq_domain_deactivate_irq(irq_data); irq_domain_activate_irq(irq_data, false); if (timer_irq_works()) { if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); goto out; } panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC"); local_irq_disable(); clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " "8254 timer not connected to IO-APIC\n"); apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " "(IRQ0) through the 8259A ...\n"); apic_printk(APIC_QUIET, KERN_INFO "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2); irq_domain_deactivate_irq(irq_data); irq_domain_activate_irq(irq_data, false); legacy_pic->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); goto out; } /* * Cleanup, just in case ... */ local_irq_disable(); legacy_pic->mask(0); clear_IO_APIC_pin(apic2, pin2); apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...\n"); lapic_register_intr(0); apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ legacy_pic->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } local_irq_disable(); legacy_pic->mask(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as ExtINT IRQ...\n"); legacy_pic->init(0); legacy_pic->make_irq(0); apic_write(APIC_LVT0, APIC_DM_EXTINT); legacy_pic->unmask(0); unlock_ExtINT_logic(); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } local_irq_disable(); apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); if (apic_is_x2apic_enabled()) apic_printk(APIC_QUIET, KERN_INFO "Perhaps problem with the pre-enabled x2apic mode\n" "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } /* * Traditionally ISA IRQ2 is the cascade IRQ, and is not available * to devices. However there may be an I/O APIC pin available for * this interrupt regardless. The pin may be left unconnected, but * typically it will be reused as an ExtINT cascade interrupt for * the master 8259A. In the MPS case such a pin will normally be * reported as an ExtINT interrupt in the MP table. With ACPI * there is no provision for ExtINT interrupts, and in the absence * of an override it would be treated as an ordinary ISA I/O APIC * interrupt, that is edge-triggered and unmasked by default. We * used to do this, but it caused problems on some systems because * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using * the same ExtINT cascade interrupt to drive the local APIC of the * bootstrap processor. Therefore we refrain from routing IRQ2 to * the I/O APIC in all cases now. No actual device should request * it anyway. --macro */ #define PIC_IRQS (1UL << PIC_CASCADE_IR) static int mp_irqdomain_create(int ioapic) { struct irq_alloc_info info; struct irq_domain *parent; int hwirqs = mp_ioapic_pin_count(ioapic); struct ioapic *ip = &ioapics[ioapic]; struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg; struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); struct fwnode_handle *fn; char *name = "IO-APIC"; if (cfg->type == IOAPIC_DOMAIN_INVALID) return 0; init_irq_alloc_info(&info, NULL); info.type = X86_IRQ_ALLOC_TYPE_IOAPIC; info.ioapic_id = mpc_ioapic_id(ioapic); parent = irq_remapping_get_ir_irq_domain(&info); if (!parent) parent = x86_vector_domain; else name = "IO-APIC-IR"; /* Handle device tree enumerated APICs proper */ if (cfg->dev) { fn = of_node_to_fwnode(cfg->dev); } else { fn = irq_domain_alloc_named_id_fwnode(name, ioapic); if (!fn) return -ENOMEM; } ip->irqdomain = irq_domain_create_linear(fn, hwirqs, cfg->ops, (void *)(long)ioapic); if (!ip->irqdomain) { /* Release fw handle if it was allocated above */ if (!cfg->dev) irq_domain_free_fwnode(fn); return -ENOMEM; } ip->irqdomain->parent = parent; if (cfg->type == IOAPIC_DOMAIN_LEGACY || cfg->type == IOAPIC_DOMAIN_STRICT) ioapic_dynirq_base = max(ioapic_dynirq_base, gsi_cfg->gsi_end + 1); return 0; } static void ioapic_destroy_irqdomain(int idx) { struct ioapic_domain_cfg *cfg = &ioapics[idx].irqdomain_cfg; struct fwnode_handle *fn = ioapics[idx].irqdomain->fwnode; if (ioapics[idx].irqdomain) { irq_domain_remove(ioapics[idx].irqdomain); if (!cfg->dev) irq_domain_free_fwnode(fn); ioapics[idx].irqdomain = NULL; } } void __init setup_IO_APIC(void) { int ioapic; if (skip_ioapic_setup || !nr_ioapics) return; io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); /* * Set up IO-APIC IRQ routing. */ x86_init.mpparse.setup_ioapic_ids(); sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); if (nr_legacy_irqs()) check_timer(); ioapic_initialized = 1; } static void resume_ioapic_id(int ioapic_idx) { unsigned long flags; union IO_APIC_reg_00 reg_00; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); io_apic_write(ioapic_idx, 0, reg_00.raw); } raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void ioapic_resume(void) { int ioapic_idx; for_each_ioapic_reverse(ioapic_idx) resume_ioapic_id(ioapic_idx); restore_ioapic_entries(); } static struct syscore_ops ioapic_syscore_ops = { .suspend = save_ioapic_entries, .resume = ioapic_resume, }; static int __init ioapic_init_ops(void) { register_syscore_ops(&ioapic_syscore_ops); return 0; } device_initcall(ioapic_init_ops); static int io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_01.raw = io_apic_read(ioapic, 1); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* The register returns the maximum index redir index * supported, which is one less than the total number of redir * entries. */ return reg_01.bits.entries + 1; } unsigned int arch_dynirq_lower_bound(unsigned int from) { /* * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use * gsi_top if ioapic_dynirq_base hasn't been initialized yet. */ if (!ioapic_initialized) return gsi_top; /* * For DT enabled machines ioapic_dynirq_base is irrelevant and not * updated. So simply return @from if ioapic_dynirq_base == 0. */ return ioapic_dynirq_base ? : from; } #ifdef CONFIG_X86_32 static int io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; physid_mask_t tmp; unsigned long flags; int i = 0; /* * The P4 platform supports up to 256 APIC IDs on two separate APIC * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ if (physids_empty(apic_id_map)) apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map); raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); if (apic_id >= get_physical_broadcast()) { printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " "%d\n", ioapic, apic_id, reg_00.bits.ID); apic_id = reg_00.bits.ID; } /* * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (apic->check_apicid_used(&apic_id_map, apic_id)) { for (i = 0; i < get_physical_broadcast(); i++) { if (!apic->check_apicid_used(&apic_id_map, i)) break; } if (i == get_physical_broadcast()) panic("Max apic_id exceeded!\n"); printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " "trying %d\n", ioapic, apic_id, i); apic_id = i; } apic->apicid_to_cpu_present(apic_id, &tmp); physids_or(apic_id_map, apic_id_map, tmp); if (reg_00.bits.ID != apic_id) { reg_00.bits.ID = apic_id; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0, reg_00.raw); reg_00.raw = io_apic_read(ioapic, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ if (reg_00.bits.ID != apic_id) { pr_err("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); return -1; } } apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); return apic_id; } static u8 io_apic_unique_id(int idx, u8 id) { if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && !APIC_XAPIC(boot_cpu_apic_version)) return io_apic_get_unique_id(idx, id); else return id; } #else static u8 io_apic_unique_id(int idx, u8 id) { union IO_APIC_reg_00 reg_00; DECLARE_BITMAP(used, 256); unsigned long flags; u8 new_id; int i; bitmap_zero(used, 256); for_each_ioapic(i) __set_bit(mpc_ioapic_id(i), used); /* Hand out the requested id if available */ if (!test_bit(id, used)) return id; /* * Read the current id from the ioapic and keep it if * available. */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); new_id = reg_00.bits.ID; if (!test_bit(new_id, used)) { apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Using reg apic_id %d instead of %d\n", idx, new_id, id); return new_id; } /* * Get the next free id and write it to the ioapic. */ new_id = find_first_zero_bit(used, 256); reg_00.bits.ID = new_id; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(idx, 0, reg_00.raw); reg_00.raw = io_apic_read(idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ BUG_ON(reg_00.bits.ID != new_id); return new_id; } #endif static int io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_01.raw = io_apic_read(ioapic, 1); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return reg_01.bits.version; } int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity) { int ioapic, pin, idx; if (skip_ioapic_setup) return -1; ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return -1; pin = mp_find_ioapic_pin(ioapic, gsi); if (pin < 0) return -1; idx = find_irq_entry(ioapic, pin, mp_INT); if (idx < 0) return -1; *trigger = irq_trigger(idx); *polarity = irq_polarity(idx); return 0; } /* * This function updates target affinity of IOAPIC interrupts to include * the CPUs which came online during SMP bringup. */ #define IOAPIC_RESOURCE_NAME_SIZE 11 static struct resource *ioapic_resources; static struct resource * __init ioapic_setup_resources(void) { unsigned long n; struct resource *res; char *mem; int i; if (nr_ioapics == 0) return NULL; n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); n *= nr_ioapics; mem = alloc_bootmem(n); res = (void *)mem; mem += sizeof(struct resource) * nr_ioapics; for_each_ioapic(i) { res[i].name = mem; res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); mem += IOAPIC_RESOURCE_NAME_SIZE; ioapics[i].iomem_res = &res[i]; } ioapic_resources = res; return res; } void __init io_apic_init_mappings(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; struct resource *ioapic_res; int i; ioapic_res = ioapic_setup_resources(); for_each_ioapic(i) { if (smp_found_config) { ioapic_phys = mpc_ioapic_addr(i); #ifdef CONFIG_X86_32 if (!ioapic_phys) { printk(KERN_ERR "WARNING: bogus zero IO-APIC " "address found in MPTABLE, " "disabling IO/APIC support!\n"); smp_found_config = 0; skip_ioapic_setup = 1; goto fake_ioapic_page; } #endif } else { #ifdef CONFIG_X86_32 fake_ioapic_page: #endif ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); ioapic_phys = __pa(ioapic_phys); } set_fixmap_nocache(idx, ioapic_phys); apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n", __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys); idx++; ioapic_res->start = ioapic_phys; ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; ioapic_res++; } } void __init ioapic_insert_resources(void) { int i; struct resource *r = ioapic_resources; if (!r) { if (nr_ioapics > 0) printk(KERN_ERR "IO APIC resources couldn't be allocated.\n"); return; } for_each_ioapic(i) { insert_resource(&iomem_resource, r); r++; } } int mp_find_ioapic(u32 gsi) { int i; if (nr_ioapics == 0) return -1; /* Find the IOAPIC that manages this GSI. */ for_each_ioapic(i) { struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end) return i; } printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); return -1; } int mp_find_ioapic_pin(int ioapic, u32 gsi) { struct mp_ioapic_gsi *gsi_cfg; if (WARN_ON(ioapic < 0)) return -1; gsi_cfg = mp_ioapic_gsi_routing(ioapic); if (WARN_ON(gsi > gsi_cfg->gsi_end)) return -1; return gsi - gsi_cfg->gsi_base; } static int bad_ioapic_register(int idx) { union IO_APIC_reg_00 reg_00; union IO_APIC_reg_01 reg_01; union IO_APIC_reg_02 reg_02; reg_00.raw = io_apic_read(idx, 0); reg_01.raw = io_apic_read(idx, 1); reg_02.raw = io_apic_read(idx, 2); if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", mpc_ioapic_addr(idx)); return 1; } return 0; } static int find_free_ioapic_entry(void) { int idx; for (idx = 0; idx < MAX_IO_APICS; idx++) if (ioapics[idx].nr_registers == 0) return idx; return MAX_IO_APICS; } /** * mp_register_ioapic - Register an IOAPIC device * @id: hardware IOAPIC ID * @address: physical address of IOAPIC register area * @gsi_base: base of GSI associated with the IOAPIC * @cfg: configuration information for the IOAPIC */ int mp_register_ioapic(int id, u32 address, u32 gsi_base, struct ioapic_domain_cfg *cfg) { bool hotplug = !!ioapic_initialized; struct mp_ioapic_gsi *gsi_cfg; int idx, ioapic, entries; u32 gsi_end; if (!address) { pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); return -EINVAL; } for_each_ioapic(ioapic) if (ioapics[ioapic].mp_config.apicaddr == address) { pr_warn("address 0x%x conflicts with IOAPIC%d\n", address, ioapic); return -EEXIST; } idx = find_free_ioapic_entry(); if (idx >= MAX_IO_APICS) { pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", MAX_IO_APICS, idx); return -ENOSPC; } ioapics[idx].mp_config.type = MP_IOAPIC; ioapics[idx].mp_config.flags = MPC_APIC_USABLE; ioapics[idx].mp_config.apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); if (bad_ioapic_register(idx)) { clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENODEV; } ioapics[idx].mp_config.apicid = io_apic_unique_id(idx, id); ioapics[idx].mp_config.apicver = io_apic_get_version(idx); /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ entries = io_apic_get_redir_entries(idx); gsi_end = gsi_base + entries - 1; for_each_ioapic(ioapic) { gsi_cfg = mp_ioapic_gsi_routing(ioapic); if ((gsi_base >= gsi_cfg->gsi_base && gsi_base <= gsi_cfg->gsi_end) || (gsi_end >= gsi_cfg->gsi_base && gsi_end <= gsi_cfg->gsi_end)) { pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", gsi_base, gsi_end, gsi_cfg->gsi_base, gsi_cfg->gsi_end); clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENOSPC; } } gsi_cfg = mp_ioapic_gsi_routing(idx); gsi_cfg->gsi_base = gsi_base; gsi_cfg->gsi_end = gsi_end; ioapics[idx].irqdomain = NULL; ioapics[idx].irqdomain_cfg = *cfg; /* * If mp_register_ioapic() is called during early boot stage when * walking ACPI/SFI/DT tables, it's too early to create irqdomain, * we are still using bootmem allocator. So delay it to setup_IO_APIC(). */ if (hotplug) { if (mp_irqdomain_create(idx)) { clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENOMEM; } alloc_ioapic_saved_registers(idx); } if (gsi_cfg->gsi_end >= gsi_top) gsi_top = gsi_cfg->gsi_end + 1; if (nr_ioapics <= idx) nr_ioapics = idx + 1; /* Set nr_registers to mark entry present */ ioapics[idx].nr_registers = entries; pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", idx, mpc_ioapic_id(idx), mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), gsi_cfg->gsi_base, gsi_cfg->gsi_end); return 0; } int mp_unregister_ioapic(u32 gsi_base) { int ioapic, pin; int found = 0; for_each_ioapic(ioapic) if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) { found = 1; break; } if (!found) { pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); return -ENODEV; } for_each_pin(ioapic, pin) { u32 gsi = mp_pin_to_gsi(ioapic, pin); int irq = mp_map_gsi_to_irq(gsi, 0, NULL); struct mp_chip_data *data; if (irq >= 0) { data = irq_get_chip_data(irq); if (data && data->count) { pr_warn("pin%d on IOAPIC%d is still in use.\n", pin, ioapic); return -EBUSY; } } } /* Mark entry not present */ ioapics[ioapic].nr_registers = 0; ioapic_destroy_irqdomain(ioapic); free_ioapic_saved_registers(ioapic); if (ioapics[ioapic].iomem_res) release_resource(ioapics[ioapic].iomem_res); clear_fixmap(FIX_IO_APIC_BASE_0 + ioapic); memset(&ioapics[ioapic], 0, sizeof(ioapics[ioapic])); return 0; } int mp_ioapic_registered(u32 gsi_base) { int ioapic; for_each_ioapic(ioapic) if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) return 1; return 0; } static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data, struct irq_alloc_info *info) { if (info && info->ioapic_valid) { data->trigger = info->ioapic_trigger; data->polarity = info->ioapic_polarity; } else if (acpi_get_override_irq(gsi, &data->trigger, &data->polarity) < 0) { /* PCI interrupts are always active low level triggered. */ data->trigger = IOAPIC_LEVEL; data->polarity = IOAPIC_POL_LOW; } } static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data, struct IO_APIC_route_entry *entry) { memset(entry, 0, sizeof(*entry)); entry->delivery_mode = apic->irq_delivery_mode; entry->dest_mode = apic->irq_dest_mode; entry->dest = cfg->dest_apicid; entry->vector = cfg->vector; entry->trigger = data->trigger; entry->polarity = data->polarity; /* * Mask level triggered irqs. Edge triggered irqs are masked * by the irq core code in case they fire. */ if (data->trigger == IOAPIC_LEVEL) entry->mask = IOAPIC_MASKED; else entry->mask = IOAPIC_UNMASKED; } int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs, void *arg) { int ret, ioapic, pin; struct irq_cfg *cfg; struct irq_data *irq_data; struct mp_chip_data *data; struct irq_alloc_info *info = arg; unsigned long flags; if (!info || nr_irqs > 1) return -EINVAL; irq_data = irq_domain_get_irq_data(domain, virq); if (!irq_data) return -EINVAL; ioapic = mp_irqdomain_ioapic_idx(domain); pin = info->ioapic_pin; if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0) return -EEXIST; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; info->ioapic_entry = &data->entry; ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); if (ret < 0) { kfree(data); return ret; } INIT_LIST_HEAD(&data->irq_2_pin); irq_data->hwirq = info->ioapic_pin; irq_data->chip = (domain->parent == x86_vector_domain) ? &ioapic_chip : &ioapic_ir_chip; irq_data->chip_data = data; mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info); cfg = irqd_cfg(irq_data); add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin); local_irq_save(flags); if (info->ioapic_entry) mp_setup_entry(cfg, data, info->ioapic_entry); mp_register_handler(virq, data->trigger); if (virq < nr_legacy_irqs()) legacy_pic->mask(virq); local_irq_restore(flags); apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n", ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector, virq, data->trigger, data->polarity, cfg->dest_apicid); return 0; } void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs) { struct irq_data *irq_data; struct mp_chip_data *data; BUG_ON(nr_irqs != 1); irq_data = irq_domain_get_irq_data(domain, virq); if (irq_data && irq_data->chip_data) { data = irq_data->chip_data; __remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); WARN_ON(!list_empty(&data->irq_2_pin)); kfree(irq_data->chip_data); } irq_domain_free_irqs_top(domain, virq, nr_irqs); } int mp_irqdomain_activate(struct irq_domain *domain, struct irq_data *irq_data, bool reserve) { unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); ioapic_configure_entry(irq_data); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return 0; } void mp_irqdomain_deactivate(struct irq_domain *domain, struct irq_data *irq_data) { /* It won't be called for IRQ with multiple IOAPIC pins associated */ ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); } int mp_irqdomain_ioapic_idx(struct irq_domain *domain) { return (int)(long)domain->host_data; } const struct irq_domain_ops mp_ioapic_irqdomain_ops = { .alloc = mp_irqdomain_alloc, .free = mp_irqdomain_free, .activate = mp_irqdomain_activate, .deactivate = mp_irqdomain_deactivate, };