/* * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards * * Written 1994-1999 by Avery Pennarun. * Written 1999-2000 by Martin Mares . * Derived from skeleton.c by Donald Becker. * * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com) * for sponsoring the further development of this driver. * * ********************** * * The original copyright of skeleton.c was as follows: * * skeleton.c Written 1993 by Donald Becker. * Copyright 1993 United States Government as represented by the * Director, National Security Agency. This software may only be used * and distributed according to the terms of the GNU General Public License as * modified by SRC, incorporated herein by reference. * * ********************** * * For more details, see drivers/net/arcnet.c * * ********************** */ #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include "arcdevice.h" #include "com9026.h" /* Internal function declarations */ static int arcrimi_probe(struct net_device *dev); static int arcrimi_found(struct net_device *dev); static void arcrimi_command(struct net_device *dev, int command); static int arcrimi_status(struct net_device *dev); static void arcrimi_setmask(struct net_device *dev, int mask); static int arcrimi_reset(struct net_device *dev, int really_reset); static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count); /* Handy defines for ARCnet specific stuff */ /* Amount of I/O memory used by the card */ #define BUFFER_SIZE (512) #define MIRROR_SIZE (BUFFER_SIZE * 4) /* We cannot probe for a RIM I card; one reason is I don't know how to reset * them. In fact, we can't even get their node ID automatically. So, we * need to be passed a specific shmem address, IRQ, and node ID. */ static int __init arcrimi_probe(struct net_device *dev) { if (BUGLVL(D_NORMAL)) { pr_info("%s\n", "RIM I (entirely mem-mapped) support"); pr_info("E-mail me if you actually test the RIM I driver, please!\n"); pr_info("Given: node %02Xh, shmem %lXh, irq %d\n", dev->dev_addr[0], dev->mem_start, dev->irq); } if (dev->mem_start <= 0 || dev->irq <= 0) { if (BUGLVL(D_NORMAL)) pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n"); return -ENODEV; } if (dev->dev_addr[0] == 0) { if (BUGLVL(D_NORMAL)) pr_err("You need to specify your card's station ID!\n"); return -ENODEV; } /* Grab the memory region at mem_start for MIRROR_SIZE bytes. * Later in arcrimi_found() the real size will be determined * and this reserve will be released and the correct size * will be taken. */ if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { if (BUGLVL(D_NORMAL)) pr_notice("Card memory already allocated\n"); return -ENODEV; } return arcrimi_found(dev); } static int check_mirror(unsigned long addr, size_t size) { void __iomem *p; int res = -1; if (!request_mem_region(addr, size, "arcnet (90xx)")) return -1; p = ioremap(addr, size); if (p) { if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue) res = 1; else res = 0; iounmap(p); } release_mem_region(addr, size); return res; } /* Set up the struct net_device associated with this card. * Called after probing succeeds. */ static int __init arcrimi_found(struct net_device *dev) { struct arcnet_local *lp; unsigned long first_mirror, last_mirror, shmem; void __iomem *p; int mirror_size; int err; p = ioremap(dev->mem_start, MIRROR_SIZE); if (!p) { release_mem_region(dev->mem_start, MIRROR_SIZE); arc_printk(D_NORMAL, dev, "Can't ioremap\n"); return -ENODEV; } /* reserve the irq */ if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) { iounmap(p); release_mem_region(dev->mem_start, MIRROR_SIZE); arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq); return -ENODEV; } shmem = dev->mem_start; arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK); arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND); /* actually the station/node ID */ /* find the real shared memory start/end points, including mirrors */ /* guess the actual size of one "memory mirror" - the number of * bytes between copies of the shared memory. On most cards, it's * 2k (or there are no mirrors at all) but on some, it's 4k. */ mirror_size = MIRROR_SIZE; if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue && check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 && check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1) mirror_size = 2 * MIRROR_SIZE; first_mirror = shmem - mirror_size; while (check_mirror(first_mirror, mirror_size) == 1) first_mirror -= mirror_size; first_mirror += mirror_size; last_mirror = shmem + mirror_size; while (check_mirror(last_mirror, mirror_size) == 1) last_mirror += mirror_size; last_mirror -= mirror_size; dev->mem_start = first_mirror; dev->mem_end = last_mirror + MIRROR_SIZE - 1; /* initialize the rest of the device structure. */ lp = netdev_priv(dev); lp->card_name = "RIM I"; lp->hw.command = arcrimi_command; lp->hw.status = arcrimi_status; lp->hw.intmask = arcrimi_setmask; lp->hw.reset = arcrimi_reset; lp->hw.owner = THIS_MODULE; lp->hw.copy_to_card = arcrimi_copy_to_card; lp->hw.copy_from_card = arcrimi_copy_from_card; /* re-reserve the memory region - arcrimi_probe() alloced this reqion * but didn't know the real size. Free that region and then re-get * with the correct size. There is a VERY slim chance this could * fail. */ iounmap(p); release_mem_region(shmem, MIRROR_SIZE); if (!request_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1, "arcnet (90xx)")) { arc_printk(D_NORMAL, dev, "Card memory already allocated\n"); goto err_free_irq; } lp->mem_start = ioremap(dev->mem_start, dev->mem_end - dev->mem_start + 1); if (!lp->mem_start) { arc_printk(D_NORMAL, dev, "Can't remap device memory!\n"); goto err_release_mem; } /* get and check the station ID from offset 1 in shmem */ dev->dev_addr[0] = arcnet_readb(lp->mem_start, COM9026_REG_R_STATION); arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n", dev->dev_addr[0], dev->irq, dev->mem_start, (dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size); err = register_netdev(dev); if (err) goto err_unmap; return 0; err_unmap: iounmap(lp->mem_start); err_release_mem: release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); err_free_irq: free_irq(dev->irq, dev); return -EIO; } /* Do a hardware reset on the card, and set up necessary registers. * * This should be called as little as possible, because it disrupts the * token on the network (causes a RECON) and requires a significant delay. * * However, it does make sure the card is in a defined state. */ static int arcrimi_reset(struct net_device *dev, int really_reset) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n", dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS)); if (really_reset) { arcnet_writeb(TESTvalue, ioaddr, -0x800); /* fake reset */ return 0; } /* clear flags & end reset */ arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND); arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND); /* enable extended (512-byte) packets */ arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND); /* done! return success. */ return 0; } static void arcrimi_setmask(struct net_device *dev, int mask) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK); } static int arcrimi_status(struct net_device *dev) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; return arcnet_readb(ioaddr, COM9026_REG_R_STATUS); } static void arcrimi_command(struct net_device *dev, int cmd) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->mem_start + 0x800; arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND); } static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count)); } static void arcrimi_copy_from_card(struct net_device *dev, int bufnum, int offset, void *buf, int count) { struct arcnet_local *lp = netdev_priv(dev); void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset; TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count)); } static int node; static int io; /* use the insmod io= irq= node= options */ static int irq; static char device[9]; /* use eg. device=arc1 to change name */ module_param(node, int, 0); module_param(io, int, 0); module_param(irq, int, 0); module_param_string(device, device, sizeof(device), 0); MODULE_LICENSE("GPL"); static struct net_device *my_dev; static int __init arc_rimi_init(void) { struct net_device *dev; dev = alloc_arcdev(device); if (!dev) return -ENOMEM; if (node && node != 0xff) dev->dev_addr[0] = node; dev->mem_start = io; dev->irq = irq; if (dev->irq == 2) dev->irq = 9; if (arcrimi_probe(dev)) { free_arcdev(dev); return -EIO; } my_dev = dev; return 0; } static void __exit arc_rimi_exit(void) { struct net_device *dev = my_dev; struct arcnet_local *lp = netdev_priv(dev); unregister_netdev(dev); iounmap(lp->mem_start); release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1); free_irq(dev->irq, dev); free_arcdev(dev); } #ifndef MODULE static int __init arcrimi_setup(char *s) { int ints[8]; s = get_options(s, 8, ints); if (!ints[0]) return 1; switch (ints[0]) { default: /* ERROR */ pr_err("Too many arguments\n"); case 3: /* Node ID */ node = ints[3]; case 2: /* IRQ */ irq = ints[2]; case 1: /* IO address */ io = ints[1]; } if (*s) snprintf(device, sizeof(device), "%s", s); return 1; } __setup("arcrimi=", arcrimi_setup); #endif /* MODULE */ module_init(arc_rimi_init) module_exit(arc_rimi_exit)