/* This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Copyright (C) 2009-2016 John Crispin * Copyright (C) 2009-2016 Felix Fietkau * Copyright (C) 2013-2016 Michael Lee */ #ifndef MTK_ETH_H #define MTK_ETH_H #include #define MTK_QDMA_PAGE_SIZE 2048 #define MTK_MAX_RX_LENGTH 1536 #define MTK_TX_DMA_BUF_LEN 0x3fff #define MTK_DMA_SIZE 256 #define MTK_NAPI_WEIGHT 64 #define MTK_MAC_COUNT 2 #define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN) #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN) #define MTK_DMA_DUMMY_DESC 0xffffffff #define MTK_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \ NETIF_MSG_PROBE | \ NETIF_MSG_LINK | \ NETIF_MSG_TIMER | \ NETIF_MSG_IFDOWN | \ NETIF_MSG_IFUP | \ NETIF_MSG_RX_ERR | \ NETIF_MSG_TX_ERR) #define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \ NETIF_F_RXCSUM | \ NETIF_F_HW_VLAN_CTAG_TX | \ NETIF_F_HW_VLAN_CTAG_RX | \ NETIF_F_SG | NETIF_F_TSO | \ NETIF_F_TSO6 | \ NETIF_F_IPV6_CSUM) #define NEXT_RX_DESP_IDX(X, Y) (((X) + 1) & ((Y) - 1)) #define MTK_MAX_RX_RING_NUM 4 #define MTK_HW_LRO_DMA_SIZE 8 #define MTK_MAX_LRO_RX_LENGTH (4096 * 3) #define MTK_MAX_LRO_IP_CNT 2 #define MTK_HW_LRO_TIMER_UNIT 1 /* 20 us */ #define MTK_HW_LRO_REFRESH_TIME 50000 /* 1 sec. */ #define MTK_HW_LRO_AGG_TIME 10 /* 200us */ #define MTK_HW_LRO_AGE_TIME 50 /* 1ms */ #define MTK_HW_LRO_MAX_AGG_CNT 64 #define MTK_HW_LRO_BW_THRE 3000 #define MTK_HW_LRO_REPLACE_DELTA 1000 #define MTK_HW_LRO_SDL_REMAIN_ROOM 1522 /* Frame Engine Global Reset Register */ #define MTK_RST_GL 0x04 #define RST_GL_PSE BIT(0) /* Frame Engine Interrupt Status Register */ #define MTK_INT_STATUS2 0x08 #define MTK_GDM1_AF BIT(28) #define MTK_GDM2_AF BIT(29) /* PDMA HW LRO Alter Flow Timer Register */ #define MTK_PDMA_LRO_ALT_REFRESH_TIMER 0x1c /* Frame Engine Interrupt Grouping Register */ #define MTK_FE_INT_GRP 0x20 /* CDMP Ingress Control Register */ #define MTK_CDMQ_IG_CTRL 0x1400 #define MTK_CDMQ_STAG_EN BIT(0) /* CDMP Exgress Control Register */ #define MTK_CDMP_EG_CTRL 0x404 /* GDM Exgress Control Register */ #define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000)) #define MTK_GDMA_ICS_EN BIT(22) #define MTK_GDMA_TCS_EN BIT(21) #define MTK_GDMA_UCS_EN BIT(20) /* Unicast Filter MAC Address Register - Low */ #define MTK_GDMA_MAC_ADRL(x) (0x508 + (x * 0x1000)) /* Unicast Filter MAC Address Register - High */ #define MTK_GDMA_MAC_ADRH(x) (0x50C + (x * 0x1000)) /* PDMA RX Base Pointer Register */ #define MTK_PRX_BASE_PTR0 0x900 #define MTK_PRX_BASE_PTR_CFG(x) (MTK_PRX_BASE_PTR0 + (x * 0x10)) /* PDMA RX Maximum Count Register */ #define MTK_PRX_MAX_CNT0 0x904 #define MTK_PRX_MAX_CNT_CFG(x) (MTK_PRX_MAX_CNT0 + (x * 0x10)) /* PDMA RX CPU Pointer Register */ #define MTK_PRX_CRX_IDX0 0x908 #define MTK_PRX_CRX_IDX_CFG(x) (MTK_PRX_CRX_IDX0 + (x * 0x10)) /* PDMA HW LRO Control Registers */ #define MTK_PDMA_LRO_CTRL_DW0 0x980 #define MTK_LRO_EN BIT(0) #define MTK_L3_CKS_UPD_EN BIT(7) #define MTK_LRO_ALT_PKT_CNT_MODE BIT(21) #define MTK_LRO_RING_RELINQUISH_REQ (0x7 << 26) #define MTK_LRO_RING_RELINQUISH_DONE (0x7 << 29) #define MTK_PDMA_LRO_CTRL_DW1 0x984 #define MTK_PDMA_LRO_CTRL_DW2 0x988 #define MTK_PDMA_LRO_CTRL_DW3 0x98c #define MTK_ADMA_MODE BIT(15) #define MTK_LRO_MIN_RXD_SDL (MTK_HW_LRO_SDL_REMAIN_ROOM << 16) /* PDMA Global Configuration Register */ #define MTK_PDMA_GLO_CFG 0xa04 #define MTK_MULTI_EN BIT(10) /* PDMA Reset Index Register */ #define MTK_PDMA_RST_IDX 0xa08 #define MTK_PST_DRX_IDX0 BIT(16) #define MTK_PST_DRX_IDX_CFG(x) (MTK_PST_DRX_IDX0 << (x)) /* PDMA Delay Interrupt Register */ #define MTK_PDMA_DELAY_INT 0xa0c #define MTK_PDMA_DELAY_RX_EN BIT(15) #define MTK_PDMA_DELAY_RX_PINT 4 #define MTK_PDMA_DELAY_RX_PINT_SHIFT 8 #define MTK_PDMA_DELAY_RX_PTIME 4 #define MTK_PDMA_DELAY_RX_DELAY \ (MTK_PDMA_DELAY_RX_EN | MTK_PDMA_DELAY_RX_PTIME | \ (MTK_PDMA_DELAY_RX_PINT << MTK_PDMA_DELAY_RX_PINT_SHIFT)) /* PDMA Interrupt Status Register */ #define MTK_PDMA_INT_STATUS 0xa20 /* PDMA Interrupt Mask Register */ #define MTK_PDMA_INT_MASK 0xa28 /* PDMA HW LRO Alter Flow Delta Register */ #define MTK_PDMA_LRO_ALT_SCORE_DELTA 0xa4c /* PDMA Interrupt grouping registers */ #define MTK_PDMA_INT_GRP1 0xa50 #define MTK_PDMA_INT_GRP2 0xa54 /* PDMA HW LRO IP Setting Registers */ #define MTK_LRO_RX_RING0_DIP_DW0 0xb04 #define MTK_LRO_DIP_DW0_CFG(x) (MTK_LRO_RX_RING0_DIP_DW0 + (x * 0x40)) #define MTK_RING_MYIP_VLD BIT(9) /* PDMA HW LRO Ring Control Registers */ #define MTK_LRO_RX_RING0_CTRL_DW1 0xb28 #define MTK_LRO_RX_RING0_CTRL_DW2 0xb2c #define MTK_LRO_RX_RING0_CTRL_DW3 0xb30 #define MTK_LRO_CTRL_DW1_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW1 + (x * 0x40)) #define MTK_LRO_CTRL_DW2_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW2 + (x * 0x40)) #define MTK_LRO_CTRL_DW3_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW3 + (x * 0x40)) #define MTK_RING_AGE_TIME_L ((MTK_HW_LRO_AGE_TIME & 0x3ff) << 22) #define MTK_RING_AGE_TIME_H ((MTK_HW_LRO_AGE_TIME >> 10) & 0x3f) #define MTK_RING_AUTO_LERAN_MODE (3 << 6) #define MTK_RING_VLD BIT(8) #define MTK_RING_MAX_AGG_TIME ((MTK_HW_LRO_AGG_TIME & 0xffff) << 10) #define MTK_RING_MAX_AGG_CNT_L ((MTK_HW_LRO_MAX_AGG_CNT & 0x3f) << 26) #define MTK_RING_MAX_AGG_CNT_H ((MTK_HW_LRO_MAX_AGG_CNT >> 6) & 0x3) /* QDMA TX Queue Configuration Registers */ #define MTK_QTX_CFG(x) (0x1800 + (x * 0x10)) #define QDMA_RES_THRES 4 /* QDMA TX Queue Scheduler Registers */ #define MTK_QTX_SCH(x) (0x1804 + (x * 0x10)) /* QDMA RX Base Pointer Register */ #define MTK_QRX_BASE_PTR0 0x1900 /* QDMA RX Maximum Count Register */ #define MTK_QRX_MAX_CNT0 0x1904 /* QDMA RX CPU Pointer Register */ #define MTK_QRX_CRX_IDX0 0x1908 /* QDMA RX DMA Pointer Register */ #define MTK_QRX_DRX_IDX0 0x190C /* QDMA Global Configuration Register */ #define MTK_QDMA_GLO_CFG 0x1A04 #define MTK_RX_2B_OFFSET BIT(31) #define MTK_RX_BT_32DWORDS (3 << 11) #define MTK_NDP_CO_PRO BIT(10) #define MTK_TX_WB_DDONE BIT(6) #define MTK_DMA_SIZE_16DWORDS (2 << 4) #define MTK_RX_DMA_BUSY BIT(3) #define MTK_TX_DMA_BUSY BIT(1) #define MTK_RX_DMA_EN BIT(2) #define MTK_TX_DMA_EN BIT(0) #define MTK_DMA_BUSY_TIMEOUT HZ /* QDMA Reset Index Register */ #define MTK_QDMA_RST_IDX 0x1A08 /* QDMA Delay Interrupt Register */ #define MTK_QDMA_DELAY_INT 0x1A0C /* QDMA Flow Control Register */ #define MTK_QDMA_FC_THRES 0x1A10 #define FC_THRES_DROP_MODE BIT(20) #define FC_THRES_DROP_EN (7 << 16) #define FC_THRES_MIN 0x4444 /* QDMA Interrupt Status Register */ #define MTK_QMTK_INT_STATUS 0x1A18 #define MTK_RX_DONE_DLY BIT(30) #define MTK_RX_DONE_INT3 BIT(19) #define MTK_RX_DONE_INT2 BIT(18) #define MTK_RX_DONE_INT1 BIT(17) #define MTK_RX_DONE_INT0 BIT(16) #define MTK_TX_DONE_INT3 BIT(3) #define MTK_TX_DONE_INT2 BIT(2) #define MTK_TX_DONE_INT1 BIT(1) #define MTK_TX_DONE_INT0 BIT(0) #define MTK_RX_DONE_INT MTK_RX_DONE_DLY #define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \ MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3) /* QDMA Interrupt grouping registers */ #define MTK_QDMA_INT_GRP1 0x1a20 #define MTK_QDMA_INT_GRP2 0x1a24 #define MTK_RLS_DONE_INT BIT(0) /* QDMA Interrupt Status Register */ #define MTK_QDMA_INT_MASK 0x1A1C /* QDMA Interrupt Mask Register */ #define MTK_QDMA_HRED2 0x1A44 /* QDMA TX Forward CPU Pointer Register */ #define MTK_QTX_CTX_PTR 0x1B00 /* QDMA TX Forward DMA Pointer Register */ #define MTK_QTX_DTX_PTR 0x1B04 /* QDMA TX Release CPU Pointer Register */ #define MTK_QTX_CRX_PTR 0x1B10 /* QDMA TX Release DMA Pointer Register */ #define MTK_QTX_DRX_PTR 0x1B14 /* QDMA FQ Head Pointer Register */ #define MTK_QDMA_FQ_HEAD 0x1B20 /* QDMA FQ Head Pointer Register */ #define MTK_QDMA_FQ_TAIL 0x1B24 /* QDMA FQ Free Page Counter Register */ #define MTK_QDMA_FQ_CNT 0x1B28 /* QDMA FQ Free Page Buffer Length Register */ #define MTK_QDMA_FQ_BLEN 0x1B2C /* GMA1 Received Good Byte Count Register */ #define MTK_GDM1_TX_GBCNT 0x2400 #define MTK_STAT_OFFSET 0x40 /* QDMA descriptor txd4 */ #define TX_DMA_CHKSUM (0x7 << 29) #define TX_DMA_TSO BIT(28) #define TX_DMA_FPORT_SHIFT 25 #define TX_DMA_FPORT_MASK 0x7 #define TX_DMA_INS_VLAN BIT(16) /* QDMA descriptor txd3 */ #define TX_DMA_OWNER_CPU BIT(31) #define TX_DMA_LS0 BIT(30) #define TX_DMA_PLEN0(_x) (((_x) & MTK_TX_DMA_BUF_LEN) << 16) #define TX_DMA_SWC BIT(14) #define TX_DMA_SDL(_x) (((_x) & 0x3fff) << 16) /* QDMA descriptor rxd2 */ #define RX_DMA_DONE BIT(31) #define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16) #define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff) #define RX_DMA_VTAG BIT(15) /* QDMA descriptor rxd3 */ #define RX_DMA_VID(_x) ((_x) & 0xfff) /* QDMA descriptor rxd4 */ #define RX_DMA_L4_VALID BIT(24) #define RX_DMA_FPORT_SHIFT 19 #define RX_DMA_FPORT_MASK 0x7 /* PHY Indirect Access Control registers */ #define MTK_PHY_IAC 0x10004 #define PHY_IAC_ACCESS BIT(31) #define PHY_IAC_READ BIT(19) #define PHY_IAC_WRITE BIT(18) #define PHY_IAC_START BIT(16) #define PHY_IAC_ADDR_SHIFT 20 #define PHY_IAC_REG_SHIFT 25 #define PHY_IAC_TIMEOUT HZ #define MTK_MAC_MISC 0x1000c #define MTK_MUX_TO_ESW BIT(0) /* Mac control registers */ #define MTK_MAC_MCR(x) (0x10100 + (x * 0x100)) #define MAC_MCR_MAX_RX_1536 BIT(24) #define MAC_MCR_IPG_CFG (BIT(18) | BIT(16)) #define MAC_MCR_FORCE_MODE BIT(15) #define MAC_MCR_TX_EN BIT(14) #define MAC_MCR_RX_EN BIT(13) #define MAC_MCR_BACKOFF_EN BIT(9) #define MAC_MCR_BACKPR_EN BIT(8) #define MAC_MCR_FORCE_RX_FC BIT(5) #define MAC_MCR_FORCE_TX_FC BIT(4) #define MAC_MCR_SPEED_1000 BIT(3) #define MAC_MCR_SPEED_100 BIT(2) #define MAC_MCR_FORCE_DPX BIT(1) #define MAC_MCR_FORCE_LINK BIT(0) #define MAC_MCR_FIXED_LINK (MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | \ MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN | \ MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN | \ MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_RX_FC | \ MAC_MCR_FORCE_TX_FC | MAC_MCR_SPEED_1000 | \ MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_LINK) /* TRGMII RXC control register */ #define TRGMII_RCK_CTRL 0x10300 #define DQSI0(x) ((x << 0) & GENMASK(6, 0)) #define DQSI1(x) ((x << 8) & GENMASK(14, 8)) #define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16)) #define RXC_DQSISEL BIT(30) #define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16)) #define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2) /* TRGMII RXC control register */ #define TRGMII_TCK_CTRL 0x10340 #define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16)) #define TXC_INV BIT(30) #define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2) #define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2)) /* TRGMII Interface mode register */ #define INTF_MODE 0x10390 #define TRGMII_INTF_DIS BIT(0) #define TRGMII_MODE BIT(1) #define TRGMII_CENTRAL_ALIGNED BIT(2) #define INTF_MODE_RGMII_1000 (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED) #define INTF_MODE_RGMII_10_100 0 /* GPIO port control registers for GMAC 2*/ #define GPIO_OD33_CTRL8 0x4c0 #define GPIO_BIAS_CTRL 0xed0 #define GPIO_DRV_SEL10 0xf00 /* ethernet subsystem chip id register */ #define ETHSYS_CHIPID0_3 0x0 #define ETHSYS_CHIPID4_7 0x4 #define MT7623_ETH 7623 #define MT7622_ETH 7622 /* ethernet subsystem config register */ #define ETHSYS_SYSCFG0 0x14 #define SYSCFG0_GE_MASK 0x3 #define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2))) #define SYSCFG0_SGMII_MASK (3 << 8) #define SYSCFG0_SGMII_GMAC1 ((2 << 8) & GENMASK(9, 8)) #define SYSCFG0_SGMII_GMAC2 ((3 << 8) & GENMASK(9, 8)) /* ethernet subsystem clock register */ #define ETHSYS_CLKCFG0 0x2c #define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11) /* ethernet reset control register */ #define ETHSYS_RSTCTRL 0x34 #define RSTCTRL_FE BIT(6) #define RSTCTRL_PPE BIT(31) /* SGMII subsystem config registers */ /* Register to auto-negotiation restart */ #define SGMSYS_PCS_CONTROL_1 0x0 #define SGMII_AN_RESTART BIT(9) /* Register to programmable link timer, the unit in 2 * 8ns */ #define SGMSYS_PCS_LINK_TIMER 0x18 #define SGMII_LINK_TIMER_DEFAULT (0x186a0 & GENMASK(19, 0)) /* Register to control remote fault */ #define SGMSYS_SGMII_MODE 0x20 #define SGMII_REMOTE_FAULT_DIS BIT(8) /* Register to power up QPHY */ #define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8 #define SGMII_PHYA_PWD BIT(4) struct mtk_rx_dma { unsigned int rxd1; unsigned int rxd2; unsigned int rxd3; unsigned int rxd4; } __packed __aligned(4); struct mtk_tx_dma { unsigned int txd1; unsigned int txd2; unsigned int txd3; unsigned int txd4; } __packed __aligned(4); struct mtk_eth; struct mtk_mac; /* struct mtk_hw_stats - the structure that holds the traffic statistics. * @stats_lock: make sure that stats operations are atomic * @reg_offset: the status register offset of the SoC * @syncp: the refcount * * All of the supported SoCs have hardware counters for traffic statistics. * Whenever the status IRQ triggers we can read the latest stats from these * counters and store them in this struct. */ struct mtk_hw_stats { u64 tx_bytes; u64 tx_packets; u64 tx_skip; u64 tx_collisions; u64 rx_bytes; u64 rx_packets; u64 rx_overflow; u64 rx_fcs_errors; u64 rx_short_errors; u64 rx_long_errors; u64 rx_checksum_errors; u64 rx_flow_control_packets; spinlock_t stats_lock; u32 reg_offset; struct u64_stats_sync syncp; }; enum mtk_tx_flags { /* PDMA descriptor can point at 1-2 segments. This enum allows us to * track how memory was allocated so that it can be freed properly. */ MTK_TX_FLAGS_SINGLE0 = 0x01, MTK_TX_FLAGS_PAGE0 = 0x02, /* MTK_TX_FLAGS_FPORTx allows tracking which port the transmitted * SKB out instead of looking up through hardware TX descriptor. */ MTK_TX_FLAGS_FPORT0 = 0x04, MTK_TX_FLAGS_FPORT1 = 0x08, }; /* This enum allows us to identify how the clock is defined on the array of the * clock in the order */ enum mtk_clks_map { MTK_CLK_ETHIF, MTK_CLK_ESW, MTK_CLK_GP0, MTK_CLK_GP1, MTK_CLK_GP2, MTK_CLK_TRGPLL, MTK_CLK_SGMII_TX_250M, MTK_CLK_SGMII_RX_250M, MTK_CLK_SGMII_CDR_REF, MTK_CLK_SGMII_CDR_FB, MTK_CLK_SGMII_CK, MTK_CLK_ETH2PLL, MTK_CLK_MAX }; #define MT7623_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \ BIT(MTK_CLK_GP1) | BIT(MTK_CLK_GP2) | \ BIT(MTK_CLK_TRGPLL)) #define MT7622_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \ BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \ BIT(MTK_CLK_GP2) | \ BIT(MTK_CLK_SGMII_TX_250M) | \ BIT(MTK_CLK_SGMII_RX_250M) | \ BIT(MTK_CLK_SGMII_CDR_REF) | \ BIT(MTK_CLK_SGMII_CDR_FB) | \ BIT(MTK_CLK_SGMII_CK) | \ BIT(MTK_CLK_ETH2PLL)) enum mtk_dev_state { MTK_HW_INIT, MTK_RESETTING }; /* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at * by the TX descriptor s * @skb: The SKB pointer of the packet being sent * @dma_addr0: The base addr of the first segment * @dma_len0: The length of the first segment * @dma_addr1: The base addr of the second segment * @dma_len1: The length of the second segment */ struct mtk_tx_buf { struct sk_buff *skb; u32 flags; DEFINE_DMA_UNMAP_ADDR(dma_addr0); DEFINE_DMA_UNMAP_LEN(dma_len0); DEFINE_DMA_UNMAP_ADDR(dma_addr1); DEFINE_DMA_UNMAP_LEN(dma_len1); }; /* struct mtk_tx_ring - This struct holds info describing a TX ring * @dma: The descriptor ring * @buf: The memory pointed at by the ring * @phys: The physical addr of tx_buf * @next_free: Pointer to the next free descriptor * @last_free: Pointer to the last free descriptor * @thresh: The threshold of minimum amount of free descriptors * @free_count: QDMA uses a linked list. Track how many free descriptors * are present */ struct mtk_tx_ring { struct mtk_tx_dma *dma; struct mtk_tx_buf *buf; dma_addr_t phys; struct mtk_tx_dma *next_free; struct mtk_tx_dma *last_free; u16 thresh; atomic_t free_count; }; /* PDMA rx ring mode */ enum mtk_rx_flags { MTK_RX_FLAGS_NORMAL = 0, MTK_RX_FLAGS_HWLRO, MTK_RX_FLAGS_QDMA, }; /* struct mtk_rx_ring - This struct holds info describing a RX ring * @dma: The descriptor ring * @data: The memory pointed at by the ring * @phys: The physical addr of rx_buf * @frag_size: How big can each fragment be * @buf_size: The size of each packet buffer * @calc_idx: The current head of ring */ struct mtk_rx_ring { struct mtk_rx_dma *dma; u8 **data; dma_addr_t phys; u16 frag_size; u16 buf_size; u16 dma_size; bool calc_idx_update; u16 calc_idx; u32 crx_idx_reg; }; #define MTK_TRGMII BIT(0) #define MTK_GMAC1_TRGMII (BIT(1) | MTK_TRGMII) #define MTK_ESW BIT(4) #define MTK_GMAC1_ESW (BIT(5) | MTK_ESW) #define MTK_SGMII BIT(8) #define MTK_GMAC1_SGMII (BIT(9) | MTK_SGMII) #define MTK_GMAC2_SGMII (BIT(10) | MTK_SGMII) #define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \ MTK_GMAC2_SGMII) #define MTK_HWLRO BIT(12) #define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x)) /* struct mtk_eth_data - This is the structure holding all differences * among various plaforms * @caps Flags shown the extra capability for the SoC * @required_clks Flags shown the bitmap for required clocks on * the target SoC * @required_pctl A bool value to show whether the SoC requires * the extra setup for those pins used by GMAC. */ struct mtk_soc_data { u32 caps; u32 required_clks; bool required_pctl; }; /* currently no SoC has more than 2 macs */ #define MTK_MAX_DEVS 2 /* struct mtk_eth - This is the main datasructure for holding the state * of the driver * @dev: The device pointer * @base: The mapped register i/o base * @page_lock: Make sure that register operations are atomic * @tx_irq__lock: Make sure that IRQ register operations are atomic * @rx_irq__lock: Make sure that IRQ register operations are atomic * @dummy_dev: we run 2 netdevs on 1 physical DMA ring and need a * dummy for NAPI to work * @netdev: The netdev instances * @mac: Each netdev is linked to a physical MAC * @irq: The IRQ that we are using * @msg_enable: Ethtool msg level * @ethsys: The register map pointing at the range used to setup * MII modes * @sgmiisys: The register map pointing at the range used to setup * SGMII modes * @pctl: The register map pointing at the range used to setup * GMAC port drive/slew values * @dma_refcnt: track how many netdevs are using the DMA engine * @tx_ring: Pointer to the memory holding info about the TX ring * @rx_ring: Pointer to the memory holding info about the RX ring * @rx_ring_qdma: Pointer to the memory holding info about the QDMA RX ring * @tx_napi: The TX NAPI struct * @rx_napi: The RX NAPI struct * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring * @phy_scratch_ring: physical address of scratch_ring * @scratch_head: The scratch memory that scratch_ring points to. * @clks: clock array for all clocks required * @mii_bus: If there is a bus we need to create an instance for it * @pending_work: The workqueue used to reset the dma ring * @state: Initialization and runtime state of the device * @soc: Holding specific data among vaious SoCs */ struct mtk_eth { struct device *dev; void __iomem *base; spinlock_t page_lock; spinlock_t tx_irq_lock; spinlock_t rx_irq_lock; struct net_device dummy_dev; struct net_device *netdev[MTK_MAX_DEVS]; struct mtk_mac *mac[MTK_MAX_DEVS]; int irq[3]; u32 msg_enable; unsigned long sysclk; struct regmap *ethsys; struct regmap *sgmiisys; struct regmap *pctl; bool hwlro; refcount_t dma_refcnt; struct mtk_tx_ring tx_ring; struct mtk_rx_ring rx_ring[MTK_MAX_RX_RING_NUM]; struct mtk_rx_ring rx_ring_qdma; struct napi_struct tx_napi; struct napi_struct rx_napi; struct mtk_tx_dma *scratch_ring; dma_addr_t phy_scratch_ring; void *scratch_head; struct clk *clks[MTK_CLK_MAX]; struct mii_bus *mii_bus; struct work_struct pending_work; unsigned long state; const struct mtk_soc_data *soc; }; /* struct mtk_mac - the structure that holds the info about the MACs of the * SoC * @id: The number of the MAC * @ge_mode: Interface mode kept for setup restoring * @of_node: Our devicetree node * @hw: Backpointer to our main datastruture * @hw_stats: Packet statistics counter * @trgmii Indicate if the MAC uses TRGMII connected to internal switch */ struct mtk_mac { int id; int ge_mode; struct device_node *of_node; struct mtk_eth *hw; struct mtk_hw_stats *hw_stats; __be32 hwlro_ip[MTK_MAX_LRO_IP_CNT]; int hwlro_ip_cnt; bool trgmii; }; /* the struct describing the SoC. these are declared in the soc_xyz.c files */ extern const struct of_device_id of_mtk_match[]; /* read the hardware status register */ void mtk_stats_update_mac(struct mtk_mac *mac); void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg); u32 mtk_r32(struct mtk_eth *eth, unsigned reg); #endif /* MTK_ETH_H */