/* * Copyright (C) 2002 Pavel Machek * Copyright (C) 2002-2005 by David Brownell * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . */ // #define DEBUG // error path messages, extra info // #define VERBOSE // more; success messages #include #include #include #include #include #include #include #include #include /* * All known Zaurii lie about their standards conformance. At least * the earliest SA-1100 models lie by saying they support CDC Ethernet. * Some later models (especially PXA-25x and PXA-27x based ones) lie * and say they support CDC MDLM (for access to cell phone modems). * * There are non-Zaurus products that use these same protocols too. * * The annoying thing is that at the same time Sharp was developing * that annoying standards-breaking software, the Linux community had * a simple "CDC Subset" working reliably on the same SA-1100 hardware. * That is, the same functionality but not violating standards. * * The CDC Ethernet nonconformance points are troublesome to hosts * with a true CDC Ethernet implementation: * - Framing appends a CRC, which the spec says drivers "must not" do; * - Transfers data in altsetting zero, instead of altsetting 1; * - All these peripherals use the same ethernet address. * * The CDC MDLM nonconformance is less immediately troublesome, since all * MDLM implementations are quasi-proprietary anyway. */ static struct sk_buff * zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) { int padlen; struct sk_buff *skb2; padlen = 2; if (!skb_cloned(skb)) { int tailroom = skb_tailroom(skb); if ((padlen + 4) <= tailroom) goto done; } skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags); dev_kfree_skb_any(skb); skb = skb2; if (skb) { u32 fcs; done: fcs = crc32_le(~0, skb->data, skb->len); fcs = ~fcs; skb_put_u8(skb, fcs & 0xff); skb_put_u8(skb, (fcs >> 8) & 0xff); skb_put_u8(skb, (fcs >> 16) & 0xff); skb_put_u8(skb, (fcs >> 24) & 0xff); } return skb; } static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf) { /* Belcarra's funky framing has other options; mostly * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes. */ dev->net->hard_header_len += 6; dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; return usbnet_generic_cdc_bind(dev, intf); } /* PDA style devices are always connected if present */ static int always_connected (struct usbnet *dev) { return 0; } static const struct driver_info zaurus_sl5x00_info = { .description = "Sharp Zaurus SL-5x00", .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, .tx_fixup = zaurus_tx_fixup, }; #define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info) static const struct driver_info zaurus_pxa_info = { .description = "Sharp Zaurus, PXA-2xx based", .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, .tx_fixup = zaurus_tx_fixup, }; #define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info) static const struct driver_info olympus_mxl_info = { .description = "Olympus R1000", .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .bind = zaurus_bind, .unbind = usbnet_cdc_unbind, .tx_fixup = zaurus_tx_fixup, }; #define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info) /* Some more recent products using Lineo/Belcarra code will wrongly claim * CDC MDLM conformance. They aren't conformant: data endpoints live * in the control interface, there's no data interface, and it's not used * to talk to a cell phone radio. But at least we can detect these two * pseudo-classes, rather than growing this product list with entries for * each new nonconformant product (sigh). */ static const u8 safe_guid[16] = { 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, }; static const u8 blan_guid[16] = { 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70, 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37, }; static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf) { u8 *buf = intf->cur_altsetting->extra; int len = intf->cur_altsetting->extralen; struct usb_cdc_mdlm_desc *desc = NULL; struct usb_cdc_mdlm_detail_desc *detail = NULL; while (len > 3) { if (buf [1] != USB_DT_CS_INTERFACE) goto next_desc; /* use bDescriptorSubType, and just verify that we get a * "BLAN" (or "SAFE") descriptor. */ switch (buf [2]) { case USB_CDC_MDLM_TYPE: if (desc) { dev_dbg(&intf->dev, "extra MDLM\n"); goto bad_desc; } desc = (void *) buf; if (desc->bLength != sizeof *desc) { dev_dbg(&intf->dev, "MDLM len %u\n", desc->bLength); goto bad_desc; } /* expect bcdVersion 1.0, ignore */ if (memcmp(&desc->bGUID, blan_guid, 16) && memcmp(&desc->bGUID, safe_guid, 16)) { /* hey, this one might _really_ be MDLM! */ dev_dbg(&intf->dev, "MDLM guid\n"); goto bad_desc; } break; case USB_CDC_MDLM_DETAIL_TYPE: if (detail) { dev_dbg(&intf->dev, "extra MDLM detail\n"); goto bad_desc; } detail = (void *) buf; switch (detail->bGuidDescriptorType) { case 0: /* "SAFE" */ if (detail->bLength != (sizeof *detail + 2)) goto bad_detail; break; case 1: /* "BLAN" */ if (detail->bLength != (sizeof *detail + 3)) goto bad_detail; break; default: goto bad_detail; } /* assuming we either noticed BLAN already, or will * find it soon, there are some data bytes here: * - bmNetworkCapabilities (unused) * - bmDataCapabilities (bits, see below) * - bPad (ignored, for PADAFTER -- BLAN-only) * bits are: * - 0x01 -- Zaurus framing (add CRC) * - 0x02 -- PADBEFORE (CRC includes some padding) * - 0x04 -- PADAFTER (some padding after CRC) * - 0x08 -- "fermat" packet mangling (for hw bugs) * the PADBEFORE appears not to matter; we interop * with devices that use it and those that don't. */ if ((detail->bDetailData[1] & ~0x02) != 0x01) { /* bmDataCapabilities == 0 would be fine too, * but framing is minidriver-coupled for now. */ bad_detail: dev_dbg(&intf->dev, "bad MDLM detail, %d %d %d\n", detail->bLength, detail->bDetailData[0], detail->bDetailData[2]); goto bad_desc; } /* same extra framing as for non-BLAN mode */ dev->net->hard_header_len += 6; dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; break; } next_desc: len -= buf [0]; /* bLength */ buf += buf [0]; } if (!desc || !detail) { dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n", desc ? "" : "func ", detail ? "" : "detail "); goto bad_desc; } /* There's probably a CDC Ethernet descriptor there, but we can't * rely on the Ethernet address it provides since not all vendors * bother to make it unique. Likewise there's no point in tracking * of the CDC event notifications. */ return usbnet_get_endpoints(dev, intf); bad_desc: dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n"); return -ENODEV; } static const struct driver_info bogus_mdlm_info = { .description = "pseudo-MDLM (BLAN) device", .flags = FLAG_POINTTOPOINT | FLAG_FRAMING_Z, .check_connect = always_connected, .tx_fixup = zaurus_tx_fixup, .bind = blan_mdlm_bind, }; static const struct usb_device_id products [] = { #define ZAURUS_MASTER_INTERFACE \ .bInterfaceClass = USB_CLASS_COMM, \ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE #define ZAURUS_FAKE_INTERFACE \ .bInterfaceClass = USB_CLASS_COMM, \ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \ .bInterfaceProtocol = USB_CDC_PROTO_NONE /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x8004, ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_STRONGARM_INFO, }, /* PXA-2xx based models are also lying-about-cdc. If you add any * more devices that claim to be CDC Ethernet, make sure they get * added to the blacklist in cdc_ether too. * * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries, * unlike the older ones with 2.4 "embedix" kernels. */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x8005, /* A-300 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x8006, /* B-500/SL-5600 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x8007, /* C-700 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x9031, /* C-750 C-760 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */ USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &bogus_mdlm_info, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x9032, /* SL-6000 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, .idProduct = 0x9032, /* SL-6000 */ ZAURUS_FAKE_INTERFACE, .driver_info = (unsigned long)&bogus_mdlm_info, }, { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x04DD, /* reported with some C860 units */ .idProduct = 0x9050, /* C-860 */ ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, { /* Motorola Rokr E6 */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &bogus_mdlm_info, }, { /* Motorola MOTOMAGX phones */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &bogus_mdlm_info, }, /* Olympus has some models with a Zaurus-compatible option. * R-1000 uses a FreeScale i.MXL cpu (ARMv4T) */ { .match_flags = USB_DEVICE_ID_MATCH_INT_INFO | USB_DEVICE_ID_MATCH_DEVICE, .idVendor = 0x07B4, .idProduct = 0x0F02, /* R-1000 */ ZAURUS_MASTER_INTERFACE, .driver_info = OLYMPUS_MXL_INFO, }, /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */ { USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &bogus_mdlm_info, }, { }, // END }; MODULE_DEVICE_TABLE(usb, products); static struct usb_driver zaurus_driver = { .name = "zaurus", .id_table = products, .probe = usbnet_probe, .disconnect = usbnet_disconnect, .suspend = usbnet_suspend, .resume = usbnet_resume, .disable_hub_initiated_lpm = 1, }; module_usb_driver(zaurus_driver); MODULE_AUTHOR("Pavel Machek, David Brownell"); MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products"); MODULE_LICENSE("GPL");