/* -*- linux-c -*- * * * ALSA driver for the digigram lx6464es interface * adapted upstream headers * * Copyright (c) 2009 Tim Blechmann <tim@klingt.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. * */ #ifndef LX_DEFS_H #define LX_DEFS_H /* code adapted from ethersound.h */ #define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ #define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / * [ 44k - ( 44.1k + 48k ) / 2 ] * * 8 */ #define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] * * 8 */ #define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / * [ 48k + ( 44.1k + 48k ) / 2 ] * * 8 */ /* code adapted from LXES_registers.h */ #define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the * ConfES register. */ #define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the * ConfES register. */ #define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the * ConfES register. */ #define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: * sample rate = frequency rate. */ #define CONFES_READ_PART_MASK 0x00070000 #define CONFES_WRITE_PART_MASK 0x00F80000 /* code adapted from if_drv_mb.h */ #define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if * not yet pending */ #define MASK_SYS_STATUS_URUN (1L << 30) #define MASK_SYS_STATUS_ORUN (1L << 29) #define MASK_SYS_STATUS_EOBO (1L << 28) #define MASK_SYS_STATUS_EOBI (1L << 27) #define MASK_SYS_STATUS_FREQ (1L << 26) #define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the * XES */ #define MASK_SYS_STATUS_TIMER (1L << 24) #define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ MASK_SYS_STATUS_URUN | \ MASK_SYS_STATUS_ORUN | \ MASK_SYS_STATUS_EOBO | \ MASK_SYS_STATUS_EOBI | \ MASK_SYS_STATUS_FREQ | \ MASK_SYS_STATUS_ESA) #define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ MASK_SYS_STATUS_TIMER) #define MASK_SYS_TIMER_COUNT 0x0000FFFF #define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains * internal: reserved fo end * of plx dma */ #define MASK_SYS_STATUS_XES (1L << 21) /* event that remains * internal: pending XES * IRQ */ #define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command * management: notify driver * instead of polling */ #define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ #define MICROBLAZE_IBL_MIN 32 #define MICROBLAZE_IBL_DEFAULT 128 #define MICROBLAZE_IBL_MAX 512 /* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ /* command opcodes, see reference for details */ /* the capture bit position in the object_id field in driver commands depends upon the number of managed channels. For now, 64 IN + 64 OUT are supported. HOwever, the communication protocol forsees 1024 channels, hence bit 10 indicates a capture (input) object). */ #define ID_IS_CAPTURE (1L << 10) #define ID_OFFSET 13 /* object ID is at the 13th bit in the * 1st command word.*/ #define ID_CH_MASK 0x3F #define OPCODE_OFFSET 24 /* offset of the command opcode in the first * command word.*/ enum cmd_mb_opcodes { CMD_00_INFO_DEBUG = 0x00, CMD_01_GET_SYS_CFG = 0x01, CMD_02_SET_GRANULARITY = 0x02, CMD_03_SET_TIMER_IRQ = 0x03, CMD_04_GET_EVENT = 0x04, CMD_05_GET_PIPES = 0x05, CMD_06_ALLOCATE_PIPE = 0x06, CMD_07_RELEASE_PIPE = 0x07, CMD_08_ASK_BUFFERS = 0x08, CMD_09_STOP_PIPE = 0x09, CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, CMD_0B_TOGGLE_PIPE_STATE = 0x0b, CMD_0C_DEF_STREAM = 0x0c, CMD_0D_SET_MUTE = 0x0d, CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, CMD_0F_UPDATE_BUFFER = 0x0f, CMD_10_GET_BUFFER = 0x10, CMD_11_CANCEL_BUFFER = 0x11, CMD_12_GET_PEAK = 0x12, CMD_13_SET_STREAM_STATE = 0x13, CMD_14_INVALID = 0x14, }; /* pipe states */ enum pipe_state_t { PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ * (free or stopped, or paused). */ PSTATE_RUN = 1, /* sustained play/record state. */ PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do * not DMA, record pipe do a last DMA. */ PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do * not yet increase their sample count, record * pipes do not DMA. */ PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet * receive an "alloc" command. */ }; /* stream states */ enum stream_state_t { SSTATE_STOP = 0x00, /* setting to stop resets the stream spl * count.*/ SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ }; /* buffer flags */ enum buffer_flags { BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ BF_CURRENT = 0x40, /* set if this is the current buffer (there is * always a current buffer).*/ BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event * when finished.*/ BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] * by the end of this buffer.*/ BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ BF_xx = 0x04, /* future extension.*/ BF_EOB = 0x02, /* set if finished, but not yet free.*/ BF_PAUSE = 0x01, /* pause stream at buffer end.*/ BF_ZERO = 0x00, /* no flags (init).*/ }; /* * Stream Flags definitions */ enum stream_flags { SF_ZERO = 0x00000000, /* no flags (stream invalid). */ SF_VALID = 0x10000000, /* the stream has a valid DMA_conf * info (setstreamformat). */ SF_XRUN = 0x20000000, /* the stream is un x-run state. */ SF_START = 0x40000000, /* the DMA is running.*/ SF_ASIO = 0x80000000, /* ASIO.*/ }; #define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ #define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ #define MASK_STREAM_HAS_MAPPING (1L << 12) #define MASK_STREAM_IS_ASIO (1L << 9) #define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th * bit in the command word. */ #define STREAM_FMT_16b 0x02 #define STREAM_FMT_intel 0x01 #define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response * word */ #define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the * response word. */ #define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of * datasize in the buffer_t structure. */ #define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, * may be 0xFF for "current". */ /* code adapted from PcxErr_e.h */ /* Bits masks */ #define ERROR_MASK 0x8000 #define SOURCE_MASK 0x7800 #define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ #define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ #define E_SOURCE_API 0x1000 /* 2 >> 1 */ /* Error tools */ #define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ /* Error pcxaudio */ #define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ /* Error virtual pcx */ #define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ /* Error dispatcher */ #define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ /* Error from CobraNet firmware */ #define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ #define E_SOURCE_USER 0x7800 #define CLASS_MASK 0x0700 #define CODE_MASK 0x00FF /* Bits values */ /* Values for the error/warning bit */ #define ERROR_VALUE 0x8000 #define WARNING_VALUE 0x0000 /* Class values */ #define E_CLASS_GENERAL 0x0000 #define E_CLASS_INVALID_CMD 0x0100 #define E_CLASS_INVALID_STD_OBJECT 0x0200 #define E_CLASS_RSRC_IMPOSSIBLE 0x0300 #define E_CLASS_WRONG_CONTEXT 0x0400 #define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 #define E_CLASS_REAL_TIME_ERROR 0x0600 #define E_CLASS_DIRECTSHOW 0x0700 #define E_CLASS_FREE 0x0700 /* Complete DRV error code for the general class */ #define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) #define ED_CONCURRENCY (ED_GN | 0x01) #define ED_DSP_CRASHED (ED_GN | 0x02) #define ED_UNKNOWN_BOARD (ED_GN | 0x03) #define ED_NOT_INSTALLED (ED_GN | 0x04) #define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) #define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) #define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) #define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) #define ED_CANCELLED (ED_GN | 0x09) #define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) #define ED_INVALID_ADDRESS (ED_GN | 0x11) #define ED_DSP_CORRUPTED (ED_GN | 0x12) #define ED_PENDING_OPERATION (ED_GN | 0x13) #define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) #define ED_NET_REGISTER_ERROR (ED_GN | 0x15) #define ED_NET_THREAD_ERROR (ED_GN | 0x16) #define ED_NET_OPEN_ERROR (ED_GN | 0x17) #define ED_NET_CLOSE_ERROR (ED_GN | 0x18) #define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) #define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) #define ED_NET_SEND_ERROR (ED_GN | 0x1B) #define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) #define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) #define ED_NET_WAIT_ERROR (ED_GN | 0x1E) #define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) #define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) #define ED_INVALID_RS232_INIT (ED_GN | 0x21) #define ED_FILE_ERROR (ED_GN | 0x22) #define ED_INVALID_GPIO_CMD (ED_GN | 0x23) #define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) #define ED_RS232_NOT_OPENED (ED_GN | 0x25) #define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) #define ED_GPIO_NOT_OPENED (ED_GN | 0x27) #define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ #define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ #define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage * pour RCX * (old 0x28) * */ #define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ #define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ #define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ #define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ #define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ #define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ #define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ #define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour * PCX (old 0x14) */ #define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ #define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ #define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ #define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ #define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) #define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) /* Complete DRV error code for real time class */ #define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) #define ED_DSP_TIMED_OUT (ED_RT | 0x01) #define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) #define ED_STREAM_OVERRUN (ED_RT | 0x03) #define ED_DSP_BUSY (ED_RT | 0x04) #define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) #define ED_BOARD_TIME_OUT (ED_RT | 0x06) #define ED_XILINX_ERROR (ED_RT | 0x07) #define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) /* Complete BOARD error code for the invaid standard object class */ #define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ E_CLASS_INVALID_STD_OBJECT) #define EB_INVALID_EFFECT (EB_ISO | 0x00) #define EB_INVALID_PIPE (EB_ISO | 0x40) #define EB_INVALID_STREAM (EB_ISO | 0x80) #define EB_INVALID_AUDIO (EB_ISO | 0xC0) /* Complete BOARD error code for impossible resource allocation class */ #define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) #define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) #define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) #define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE #define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE #define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) #define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) #define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) #define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) #define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) #define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) #define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) #define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) #define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) #define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) #define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) #define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) #define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) /* Complete BOARD error code for wrong call context class */ #define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) #define EB_CMD_REFUSED (EB_WCC | 0x00) #define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) #define EB_SPC_REFUSED (EB_WCC | 0xFD) #define EB_CSN_REFUSED (EB_WCC | 0xFE) #define EB_CSE_REFUSED (EB_WCC | 0xFF) #endif /* LX_DEFS_H */