blob: 12ab2f723eb0614f7460409e667ccd13cba4e77d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
Tegra SoC SATA AHCI controller
Required properties :
- compatible : Must be one of:
- Tegra124 : "nvidia,tegra124-ahci"
- Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
- Tegra210 : "nvidia,tegra210-ahci"
- reg : Should contain 2 entries:
- AHCI register set (SATA BAR5)
- SATA register set
- interrupts : Defines the interrupt used by SATA
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- sata
- sata-oob
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- sata
- sata-oob
- sata-cold
- phys : Must contain an entry for each entry in phy-names.
See ../phy/phy-bindings.txt for details.
- phy-names : Must include the following entries:
- For Tegra124 and Tegra132:
- sata-phy : XUSB PADCTL SATA PHY
- For Tegra124 and Tegra132:
- hvdd-supply : Defines the SATA HVDD regulator
- vddio-supply : Defines the SATA VDDIO regulator
- avdd-supply : Defines the SATA AVDD regulator
- target-5v-supply : Defines the SATA 5V power regulator
- target-12v-supply : Defines the SATA 12V power regulator
Optional properties:
- reg :
- AUX register set
- clock-names :
- cml1 :
cml1 clock should be defined here if the PHY driver
doesn't manage them. If it does, they should not be.
- phy-names :
- For T210:
- sata-phy
|
