path: root/debian/patches-rt/0003-clocksource-drivers-timer-atmel-tcb-add-clockevent-d.patch

From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Thu, 13 Sep 2018 13:30:20 +0200
Subject: [PATCH 003/342] clocksource/drivers: timer-atmel-tcb: add clockevent
 device on separate channel
Origin: https://git.kernel.org/cgit/linux/kernel/git/rt/linux-stable-rt.git/commit?id=13133ffb22ec065c30837eceb253ab60a7f86715

Add an other clockevent device that uses a separate TCB channel when
available.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/clocksource/timer-atmel-tcb.c | 217 +++++++++++++++++++++++++-
 1 file changed, 212 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index 21fbe430f91b..63ce3b69338a 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -32,7 +32,7 @@ struct atmel_tcb_clksrc {
 	bool clk_enabled;
 };
 
-static struct atmel_tcb_clksrc tc;
+static struct atmel_tcb_clksrc tc, tce;
 
 static struct clk *tcb_clk_get(struct device_node *node, int channel)
 {
@@ -47,6 +47,203 @@ static struct clk *tcb_clk_get(struct device_node *node, int channel)
 	return of_clk_get_by_name(node->parent, "t0_clk");
 }
 
+/*
+ * Clockevent device using its own channel
+ */
+
+static void tc_clkevt2_clk_disable(struct clock_event_device *d)
+{
+	clk_disable(tce.clk[0]);
+	tce.clk_enabled = false;
+}
+
+static void tc_clkevt2_clk_enable(struct clock_event_device *d)
+{
+	if (tce.clk_enabled)
+		return;
+	clk_enable(tce.clk[0]);
+	tce.clk_enabled = true;
+}
+
+static int tc_clkevt2_stop(struct clock_event_device *d)
+{
+	writel(0xff, tce.base + ATMEL_TC_IDR(tce.channels[0]));
+	writel(ATMEL_TC_CCR_CLKDIS, tce.base + ATMEL_TC_CCR(tce.channels[0]));
+
+	return 0;
+}
+
+static int tc_clkevt2_shutdown(struct clock_event_device *d)
+{
+	tc_clkevt2_stop(d);
+	if (!clockevent_state_detached(d))
+		tc_clkevt2_clk_disable(d);
+
+	return 0;
+}
+
+/* For now, we always use the 32K clock ... this optimizes for NO_HZ,
+ * because using one of the divided clocks would usually mean the
+ * tick rate can never be less than several dozen Hz (vs 0.5 Hz).
+ *
+ * A divided clock could be good for high resolution timers, since
+ * 30.5 usec resolution can seem "low".
+ */
+static int tc_clkevt2_set_oneshot(struct clock_event_device *d)
+{
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_clkevt2_stop(d);
+
+	tc_clkevt2_clk_enable(d);
+
+	/* slow clock, count up to RC, then irq and stop */
+	writel(ATMEL_TC_CMR_TCLK(4) | ATMEL_TC_CMR_CPCSTOP |
+	       ATMEL_TC_CMR_WAVE | ATMEL_TC_CMR_WAVESEL_UPRC,
+	       tce.base + ATMEL_TC_CMR(tce.channels[0]));
+	writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channels[0]));
+
+	return 0;
+}
+
+static int tc_clkevt2_set_periodic(struct clock_event_device *d)
+{
+	if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
+		tc_clkevt2_stop(d);
+
+	/* By not making the gentime core emulate periodic mode on top
+	 * of oneshot, we get lower overhead and improved accuracy.
+	 */
+	tc_clkevt2_clk_enable(d);
+
+	/* slow clock, count up to RC, then irq and restart */
+	writel(ATMEL_TC_CMR_TCLK(4) | ATMEL_TC_CMR_WAVE |
+	       ATMEL_TC_CMR_WAVESEL_UPRC,
+	       tce.base + ATMEL_TC_CMR(tce.channels[0]));
+	writel((32768 + HZ / 2) / HZ, tce.base + ATMEL_TC_RC(tce.channels[0]));
+
+	/* Enable clock and interrupts on RC compare */
+	writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channels[0]));
+	writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
+	       tce.base + ATMEL_TC_CCR(tce.channels[0]));
+
+	return 0;
+}
+
+static int tc_clkevt2_next_event(unsigned long delta,
+				 struct clock_event_device *d)
+{
+	writel(delta, tce.base + ATMEL_TC_RC(tce.channels[0]));
+	writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
+	       tce.base + ATMEL_TC_CCR(tce.channels[0]));
+
+	return 0;
+}
+
+static irqreturn_t tc_clkevt2_irq(int irq, void *handle)
+{
+	unsigned int sr;
+
+	sr = readl(tce.base + ATMEL_TC_SR(tce.channels[0]));
+	if (sr & ATMEL_TC_CPCS) {
+		tce.clkevt.event_handler(&tce.clkevt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void tc_clkevt2_suspend(struct clock_event_device *d)
+{
+	tce.cache[0].cmr = readl(tce.base + ATMEL_TC_CMR(tce.channels[0]));
+	tce.cache[0].imr = readl(tce.base + ATMEL_TC_IMR(tce.channels[0]));
+	tce.cache[0].rc = readl(tce.base + ATMEL_TC_RC(tce.channels[0]));
+	tce.cache[0].clken = !!(readl(tce.base + ATMEL_TC_SR(tce.channels[0])) &
+				ATMEL_TC_CLKSTA);
+}
+
+static void tc_clkevt2_resume(struct clock_event_device *d)
+{
+	/* Restore registers for the channel, RA and RB are not used  */
+	writel(tce.cache[0].cmr, tc.base + ATMEL_TC_CMR(tce.channels[0]));
+	writel(tce.cache[0].rc, tc.base + ATMEL_TC_RC(tce.channels[0]));
+	writel(0, tc.base + ATMEL_TC_RA(tce.channels[0]));
+	writel(0, tc.base + ATMEL_TC_RB(tce.channels[0]));
+	/* Disable all the interrupts */
+	writel(0xff, tc.base + ATMEL_TC_IDR(tce.channels[0]));
+	/* Reenable interrupts that were enabled before suspending */
+	writel(tce.cache[0].imr, tc.base + ATMEL_TC_IER(tce.channels[0]));
+
+	/* Start the clock if it was used */
+	if (tce.cache[0].clken)
+		writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
+		       tc.base + ATMEL_TC_CCR(tce.channels[0]));
+}
+
+static int __init tc_clkevt_register(struct device_node *node,
+				     struct regmap *regmap, void __iomem *base,
+				     int channel, int irq, int bits)
+{
+	int ret;
+	struct clk *slow_clk;
+
+	tce.regmap = regmap;
+	tce.base = base;
+	tce.channels[0] = channel;
+	tce.irq = irq;
+
+	slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
+	if (IS_ERR(slow_clk))
+		return PTR_ERR(slow_clk);
+
+	ret = clk_prepare_enable(slow_clk);
+	if (ret)
+		return ret;
+
+	tce.clk[0] = tcb_clk_get(node, tce.channels[0]);
+	if (IS_ERR(tce.clk[0])) {
+		ret = PTR_ERR(tce.clk[0]);
+		goto err_slow;
+	}
+
+	snprintf(tce.name, sizeof(tce.name), "%s:%d",
+		 kbasename(node->parent->full_name), channel);
+	tce.clkevt.cpumask = cpumask_of(0);
+	tce.clkevt.name = tce.name;
+	tce.clkevt.set_next_event = tc_clkevt2_next_event,
+	tce.clkevt.set_state_shutdown = tc_clkevt2_shutdown,
+	tce.clkevt.set_state_periodic = tc_clkevt2_set_periodic,
+	tce.clkevt.set_state_oneshot = tc_clkevt2_set_oneshot,
+	tce.clkevt.suspend = tc_clkevt2_suspend,
+	tce.clkevt.resume = tc_clkevt2_resume,
+	tce.clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+	tce.clkevt.rating = 140;
+
+	/* try to enable clk to avoid future errors in mode change */
+	ret = clk_prepare_enable(tce.clk[0]);
+	if (ret)
+		goto err_slow;
+	clk_disable(tce.clk[0]);
+
+	clockevents_config_and_register(&tce.clkevt, 32768, 1,
+					CLOCKSOURCE_MASK(bits));
+
+	ret = request_irq(tce.irq, tc_clkevt2_irq, IRQF_TIMER | IRQF_SHARED,
+			  tce.clkevt.name, &tce);
+	if (ret)
+		goto err_clk;
+
+	tce.registered = true;
+
+	return 0;
+
+err_clk:
+	clk_unprepare(tce.clk[0]);
+err_slow:
+	clk_disable_unprepare(slow_clk);
+
+	return ret;
+}
+
 /*
  * Clocksource and clockevent using the same channel(s)
  */
@@ -363,7 +560,7 @@ static int __init tcb_clksrc_init(struct device_node *node)
 	int irq, err, chan1 = -1;
 	unsigned bits;
 
-	if (tc.registered)
+	if (tc.registered && tce.registered)
 		return -ENODEV;
 
 	/*
@@ -395,12 +592,22 @@ static int __init tcb_clksrc_init(struct device_node *node)
 			return irq;
 	}
 
+	if (tc.registered)
+		return tc_clkevt_register(node, regmap, tcb_base, channel, irq,
+					  bits);
+
 	if (bits == 16) {
 		of_property_read_u32_index(node, "reg", 1, &chan1);
 		if (chan1 == -1) {
-			pr_err("%s: clocksource needs two channels\n",
-			       node->parent->full_name);
-			return -EINVAL;
+			if (tce.registered) {
+				pr_err("%s: clocksource needs two channels\n",
+				       node->parent->full_name);
+				return -EINVAL;
+			} else {
+				return tc_clkevt_register(node, regmap,
+							  tcb_base, channel,
+							  irq, bits);
+			}
 		}
 	}