diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/TROUBLESHOOTING | 282 |
1 files changed, 282 insertions, 0 deletions
diff --git a/doc/TROUBLESHOOTING b/doc/TROUBLESHOOTING new file mode 100644 index 0000000..3bb6f14 --- /dev/null +++ b/doc/TROUBLESHOOTING @@ -0,0 +1,282 @@ +Troubleshooting tips and FAQ for Sudo +===================================== + +Q) When I run configure, it says "C compiler cannot create executables". +A) This usually means you either don't have a working compiler. This + could be due to the lack of a license or that some component of the + compiler suite could not be found. Check config.log for clues as + to why this is happening. On many systems, compiler components live + in /usr/ccs/bin which may not be in your PATH environment variable. + +Q) When I run configure, it says "sudo requires the 'ar' utility to build". +A) As part of the build process, sudo creates a temporary library containing + objects that are shared amongst the different sudo executables. + On Unix systems, the "ar" utility is used to do this. This error + indicates that "ar" is missing on your system. On Solaris systems, + you may need to install the SUNWbtool package. On other systems + "ar" may be included in the GNU binutils package. + +Q) Sudo compiles and installs OK but when I try to run it I get: + /usr/local/bin/sudo must be owned by uid 0 and have the setuid bit set +A) Sudo must be setuid root to do its work. Either /usr/local/bin/sudo + is not owned by uid 0 or the setuid bit is not set. This should have + been done for you by "make install" but you can fix it manually by + running the following as root: + # chown root /usr/local/bin/sudo; chmod 4755 /usr/local/bin/sudo + +Q) Sudo compiles and installs OK but when I try to run it I get: + effective uid is not 0, is /usr/local/bin/sudo on a file system with the + 'nosuid' option set or an NFS file system without root privileges? +A) The owner and permissions on the sudo binary appear to be OK but when + sudo ran, the setuid bit did not have an effect. There are two common + causes for this. The first is that the file system the sudo binary + is located on is mounted with the 'nosuid' mount option, which disables + setuid binaries. The output of the "mount" command should tell you if + the file system is mounted with the 'nosuid' option. The other possible + cause is that sudo is installed on an NFS-mounted file system that is + exported without root privileges. By default, NFS file systems are + exported with uid 0 mapped to a non-privileged uid (usually -2). You + should be able to determine whether sudo is located on an NFS-mounted + filesystem by running "df `which sudo'". + +Q) Sudo never gives me a chance to enter a password using PAM, it just + says 'Sorry, try again.' three times and exits. +A) You didn't setup PAM to work with sudo. On RedHat Linux or Fedora + Core this generally means installing the sample pam.conf file as + /etc/pam.d/sudo. See the example pam.conf file for hints on what + to use for other Linux systems. + +Q) Sudo says 'Account expired or PAM config lacks an "account" + section for sudo, contact your system administrator' and exits + but I know my account has not expired. +A) Your PAM config lacks an "account" specification. On Linux this + usually means you are missing a line like: + account required pam_unix.so + in /etc/pam.d/sudo. + +Q) Sudo is setup to log via syslog(3) but I'm not getting any log + messages. +A) Make sure you have an entry in your syslog.conf file to save + the sudo messages (see the example syslog.conf file). The default + log facility is authpriv (changeable via configure or in sudoers). + Don't forget to send a SIGHUP to your syslogd so that it re-reads + its conf file. Also, remember that syslogd does *not* create + log files, you need to create the file before syslogd will log + to it (ie: touch /var/log/sudo). + Note: the facility (e.g. "auth.debug") must be separated from the + destination (e.g. "/var/log/auth" or "@loghost") by + tabs, *not* spaces. This is a common error. + +Q) When sudo asks me for my password it never accepts what I enter even + though I know I entered my password correctly. +A) If you are not using pam and your system uses shadow passwords, + it is possible that sudo didn't properly detect that shadow + passwords are in use. Take a look at the generated config.h + file and verify that the C function used for shadow password + look ups was detected. For instance, for SVR4-style shadow + passwords, HAVE_GETSPNAM should be defined (you can search for + the string "shadow passwords" in config.h with your editor). + Note that there is no define for 4.4BSD-based shadow passwords + since that just uses the standard getpw* routines. + +Q) Can sudo use the ssh agent for authentication instead of asking + for the user's Unix password? +A) Not directly, but you can use a PAM module like pam_ssh_agent_auth + or pam_ssh for this purpose. + +Q) I don't want the sudoers file in /etc, how can I specify where it + should go? +A) Use the --sysconfdir option to configure. Ie: + configure --sysconfdir=/dir/you/want/sudoers/in + +Q) Can I put the sudoers file in NIS/NIS+ or do I have to have a + copy on each machine? +A) There is no support for making an NIS/NIS+ map/table out of + the sudoers file at this time. You can distribute the sudoers + file via rsync or rdist. It is also possible to NFS-mount the + sudoers file. If you use LDAP at your site you may be interested + in sudo's LDAP sudoers support, see the README.LDAP file and the + sudoers.ldap manual. + +Q) I don't run sendmail on my machine. Does this mean that I cannot + use sudo? +A) No, you just need to disable mailing with a line like: + Defaults !mailerpath + in your sudoers file or run configure with the --without-sendmail + option. + +Q) When I run visudo it uses vi as the editor and I hate vi. How + can I make it use another editor? +A) You can specify the editor to use in visudo in the sudoers file. + See the "editor" and "env_editor" entries in the sudoers manual. + The defaults can also be set at configure time using the + --with-editor and --with-env-editor configure options. + +Q) Sudo appears to be removing some variables from my environment, why? +A) By default, sudo runs commands with new, minimal environment. + It is possible to control what environment variables are copied + from the invoking user's environment using the "env_keep" setting + in sudoers. Another, less secure, option is to disable the + "env_reset" setting to copy all variables from the invoking + user's environment that are not considered "dangerous". See the + "Command Environment" section of the sudoers manual for more + information. + +Q) How can I keep sudo from asking for a password? +A) To specify this on a per-user (and per-command) basis, use the + 'NOPASSWD' tag right before the command list in sudoers. See + the sudoers man page and examples/sudoers for details. To disable + passwords completely, add !authenticate" to the Defaults line + in /etc/sudoers. You can also turn off authentication on a + per-user or per-host basis using a user or host-specific Defaults + entry in sudoers. To hard-code the global default, you can + configure with the --without-passwd option. + +Q) When I run configure, it dies with the following error: + "no acceptable cc found in $PATH". +A) /usr/ucb/cc was the only C compiler that configure could find. + You need to tell configure the path to the "real" C compiler + via the --with-CC option. On Solaris, the path is probably + something like "/opt/SUNWspro/SC4.0/bin/cc". If you have gcc + that will also work. + +Q) When I run configure, it dies with the following error: + Fatal Error: config.cache exists from another platform! + Please remove it and re-run configure. +A) configure caches the results of its tests in a file called + config.cache to make re-running configure speedy. However, + if you are building sudo for a different platform the results + in config.cache will be wrong so you need to remove config.cache. + You can do this by "rm config.cache" or "make realclean". + Note that "make realclean" will also remove any object files + and configure temp files that are laying around as well. + +Q) I built sudo on a Solaris 11 (or higher) machine but the resulting + binary doesn't work older Solaris versions. Why? +A) Starting with Solaris 11, asprintf(3) is included in the standard + C library. To build a version of sudo on a Solaris 11 machine that + will run on an older Solaris release, edit config.h and comment out + the lines: + #define HAVE_ASPRINTF 1 + #define HAVE_VASPRINTF 1 + and run make. + +Q) When I run "visudo" it says "sudoers file busy, try again later." + and doesn't do anything. +A) Someone else is currently editing the sudoers file with visudo. + +Q) When I try to use "cd" with sudo it says "cd: command not found". +A) "cd" is a shell built-in command, you can't run it as a command + since a child process (sudo) cannot affect the current working + directory of the parent (your shell). + +Q) When I try to use "cd" with sudo the command completes without + errors but nothing happens. +A) Even though "cd" is a shell built-in command, some operating systems + include a /usr/bin/cd command for some reason. A standalone + "cd" command is totally useless since a child process (cd) cannot + affect the current working directory of the parent (your shell). + Thus, "sudo cd /foo" will start a child process, change the + directory and immediately exit without doing anything useful. + +Q) When I run sudo it says I am not allowed to run the command as root + but I don't want to run it as root, I want to run it as another user. + My sudoers file entry looks like: + bob ALL=(oracle) ALL +A) The default user sudo tries to run things as is always root, even if + the invoking user can only run commands as a single, specific user. + This may change in the future but at the present time you have to + work around this using the 'runas_default' option in sudoers. + For example: + Defaults:bob runas_default=oracle + would achieve the desired result for the preceding sudoers fragment. + +Q) When I try to run sudo via ssh, I get the error: + sudo: no tty present and no askpass program specified +A) ssh does not allocate a tty by default when running a remote command. + Without a tty, sudo cannot disable echo when prompting for a password. + You can use ssh's "-t" option to force it to allocate a tty. + Alternately, if you do not mind your password being echoed to the + screen, you can use the "visiblepw" sudoers option to allow this. + +Q) When I try to use SSL-enabled LDAP with sudo I get an error: + unable to initialize SSL cert and key db: security library: bad database. + you must set TLS_CERT in /etc/ldap.conf to use SSL +A) On systems that use a Mozilla-derived LDAP SDK there must be a + certificate database in place to use SSL-encrypted LDAP connections. + This file is usually /var/ldap/cert8.db or /etc/ldap/cert8.db. + The actual number after "cert" will vary, depending on the version + of the LDAP SDK that is being used. If you do not have a certificate + database you can either copy one from a mozilla-derived browser, such + as firefox, or create one using the "certutil" command. You can run + "certutil" as follows and press the <return> (or <enter>) key at the + password prompt: + # certutil -N -d /var/ldap + Enter a password which will be used to encrypt your keys. + The password should be at least 8 characters long, + and should contain at least one non-alphabetic character. + + Enter new password: <return> + Re-enter password: <return> + +Q) On Solaris, when I run command via sudo it displays information + about the last login for every command. How can I fix this? +A) This output comes from /usr/lib/security/pam_unix_session.so.1. + To suppress it, first create /etc/pam.d/sudo if it doesn't exist: + cp /etc/pam.d/other /etc/pam.d/sudo + Then add "nowarn" to the end of the pam_unix_session.so.1 line: + session required pam_unix_session.so.1 nowarm + +Q) On HP-UX, when I run command via sudo it displays information + about the last successful login and last authentication failure + for every command. How can I fix this? +A) This output comes from /usr/lib/security/libpam_hpsec.so.1. + To suppress it, add a line like the following to /etc/pam.conf: + sudo session required libpam_hpsec.so.1 bypass_umask bypass_last_login + +Q) On HP-UX, the umask setting in sudoers has no effect. +A) If your /etc/pam.conf file has the libpam_hpsec.so.1 session module + enabled, you may need to a add line like the following to pam.conf: + sudo session required libpam_hpsec.so.1 bypass_umask + +Q) When I run "sudo -i shell_alias" I get "command not found" even + though the alias is defined in my shell startup files. +A) Commands run via "sudo -i" are executed by the shell in + non-interactive mode. The bash shell will ony parse aliases in + interactive mode unless the "expand_aliases" shell option is + set. If you add "shopt -s expand_aliases" to your .bash_profile + (or .profile if using that instead) the aliases should now be + available to "sudo -i". + +Q) When I run sudo on AIX I get the following error: + setuidx(ID_EFFECTIVE|ID_REAL|ID_SAVED, ROOT_UID): Operation not permitted. +A) AIX's Enhanced RBAC is preventing sudo from running. To fix + this, add the following entry to /etc/security/privcmds (adjust + the path to sudo as needed) and run the setkst command as root: + + /usr/local/bin/sudo: + accessauths = ALLOW_ALL + innateprivs = PV_DAC_GID,PV_DAC_R,PV_DAC_UID,PV_DAC_X,PV_FS_CHOWN,PV_PROC_PRIO,PV_NET_PORT,PV_NET_CNTL,PV_SU_UID + secflags = FSF_EPS + +Q) Sudo configures and builds without error but when I run it I get + a Segmentation fault. +A) If you are on a Linux system, the first thing to try is to run + configure with the --disable-pie option, then "make clean" and + "make". If that fixes the problem then your operating system + does not properly support position independent executables. + Please send a message to sudo@sudo.ws with system details such + as the Linux distro, kernel version and CPU architecture. + +Q) When I run configure I get the following error: + dlopen present but libtool doesn't appear to support your platform. +A) Libtool doesn't know how to support dynamic linking on the operating + system you are building for. If you are cross-compiling, you need to + specify the operating system, not just the CPU type. For example: + --host powerpc-unknown-linux + instead of just: + --host powerpc + +Q) How do you pronounce `sudo'? +A) The official pronunciation is soo-doo (for su "do"). However, an + alternate pronunciation, a homophone of "pseudo", is also common. |