diff options
Diffstat (limited to 'doc/sudoers.mdoc.in')
| -rw-r--r-- | doc/sudoers.mdoc.in | 5398 |
1 files changed, 5398 insertions, 0 deletions
diff --git a/doc/sudoers.mdoc.in b/doc/sudoers.mdoc.in new file mode 100644 index 0000000..2053b5d --- /dev/null +++ b/doc/sudoers.mdoc.in @@ -0,0 +1,5398 @@ +.\" +.\" Copyright (c) 1994-1996, 1998-2005, 2007-2018 +.\" Todd C. Miller <Todd.Miller@sudo.ws> +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.\" Sponsored in part by the Defense Advanced Research Projects +.\" Agency (DARPA) and Air Force Research Laboratory, Air Force +.\" Materiel Command, USAF, under agreement number F39502-99-1-0512. +.\" +.nr SL @SEMAN@ +.nr BA @BAMAN@ +.nr LC @LCMAN@ +.nr PS @PSMAN@ +.Dd December 20, 2018 +.Dt SUDOERS @mansectform@ +.Os Sudo @PACKAGE_VERSION@ +.Sh NAME +.Nm sudoers +.Nd default sudo security policy plugin +.Sh DESCRIPTION +The +.Nm +policy plugin determines a user's +.Nm sudo +privileges. +It is the default +.Nm sudo +policy plugin. +The policy is driven by +the +.Pa @sysconfdir@/sudoers +file or, optionally in LDAP. +The policy format is described in detail in the +.Sx SUDOERS FILE FORMAT +section. +For information on storing +.Nm sudoers +policy information +in LDAP, please see +.Xr sudoers.ldap @mansectform@ . +.Ss Configuring sudo.conf for sudoers +.Nm sudo +consults the +.Xr sudo.conf @mansectform@ +file to determine which policy and I/O logging plugins to load. +If no +.Xr sudo.conf @mansectform@ +file is present, or if it contains no +.Li Plugin +lines, +.Nm +will be used for policy decisions and I/O logging. +To explicitly configure +.Xr sudo.conf @mansectform@ +to use the +.Nm +plugin, the following configuration can be used. +.Bd -literal -offset indent +Plugin sudoers_policy sudoers.so +Plugin sudoers_io sudoers.so +.Ed +.Pp +Starting with +.Nm sudo +1.8.5, it is possible to specify optional arguments to the +.Nm +plugin in the +.Xr sudo.conf @mansectform@ +file. +These arguments, if present, should be listed after the path to the plugin +(i.e., after +.Pa sudoers.so ) . +Multiple arguments may be specified, separated by white space. +For example: +.Bd -literal -offset indent +Plugin sudoers_policy sudoers.so sudoers_mode=0400 +.Ed +.Pp +The following plugin arguments are supported: +.Bl -tag -width 8n +.It ldap_conf=pathname +The +.Em ldap_conf +argument can be used to override the default path to the +.Pa ldap.conf +file. +.It ldap_secret=pathname +The +.Em ldap_secret +argument can be used to override the default path to the +.Pa ldap.secret +file. +.It sudoers_file=pathname +The +.Em sudoers_file +argument can be used to override the default path to the +.Em sudoers +file. +.It sudoers_uid=uid +The +.Em sudoers_uid +argument can be used to override the default owner of the sudoers file. +It should be specified as a numeric user ID. +.It sudoers_gid=gid +The +.Em sudoers_gid +argument can be used to override the default group of the sudoers file. +It must be specified as a numeric group ID (not a group name). +.It sudoers_mode=mode +The +.Em sudoers_mode +argument can be used to override the default file mode for the sudoers file. +It should be specified as an octal value. +.El +.Pp +For more information on configuring +.Xr sudo.conf @mansectform@ , +please refer to its manual. +.Ss User Authentication +The +.Nm sudoers +security policy requires that most users authenticate +themselves before they can use +.Nm sudo . +A password is not required +if the invoking user is root, if the target user is the same as the +invoking user, or if the policy has disabled authentication for the +user or command. +Unlike +.Xr su 1 , +when +.Nm sudoers +requires +authentication, it validates the invoking user's credentials, not +the target user's (or root's) credentials. +This can be changed via +the +.Em rootpw , +.Em targetpw +and +.Em runaspw +flags, described later. +.Pp +If a user who is not listed in the policy tries to run a command +via +.Nm sudo , +mail is sent to the proper authorities. +The address +used for such mail is configurable via the +.Em mailto +Defaults entry +(described later) and defaults to +.Li @mailto@ . +.Pp +Note that no mail will be sent if an unauthorized user tries to run +.Nm sudo +with the +.Fl l +or +.Fl v +option unless there is an authentication error and +either the +.Em mail_always +or +.Em mail_badpass +flags are enabled. +This allows users to +determine for themselves whether or not they are allowed to use +.Nm sudo . +All attempts to run +.Nm sudo +(successful or not) +will be logged, regardless of whether or not mail is sent. +.Pp +If +.Nm sudo +is run by root and the +.Ev SUDO_USER +environment variable +is set, the +.Nm sudoers +policy will use this value to determine who +the actual user is. +This can be used by a user to log commands +through sudo even when a root shell has been invoked. +It also +allows the +.Fl e +option to remain useful even when invoked via a +sudo-run script or program. +Note, however, that the +.Em sudoers +file lookup is still done for root, not the user specified by +.Ev SUDO_USER . +.Pp +.Nm sudoers +uses per-user time stamp files for credential caching. +Once a user has been authenticated, a record is written +containing the user ID that was used to authenticate, the +terminal session ID, the start time of the session leader +(or parent process) and a time stamp +(using a monotonic clock if one is available). +The user may then use +.Nm sudo +without a password for a short period of time +.Po +.Li @timeout@ +minutes unless overridden by the +.Em timestamp_timeout +option +.Pc . +By default, +.Nm sudoers +uses a separate record for each terminal, which means that +a user's login sessions are authenticated separately. +The +.Em timestamp_type +option can be used to select the type of time stamp record +.Nm sudoers +will use. +.Ss Logging +.Nm sudoers +can log both successful and unsuccessful attempts (as well +as errors) to +.Xr syslog 3 , +a log file, or both. +By default, +.Nm sudoers +will log via +.Xr syslog 3 +but this is changeable via the +.Em syslog +and +.Em logfile +Defaults settings. +See +.Sx "LOG FORMAT" +for a description of the log file format. +.Pp +.Nm sudoers +is also capable of running a command in a pseudo-tty and logging all +input and/or output. +The standard input, standard output and standard error can be logged +even when not associated with a terminal. +I/O logging is not on by default but can be enabled using +the +.Em log_input +and +.Em log_output +options as well as the +.Li LOG_INPUT +and +.Li LOG_OUTPUT +command tags. +See +.Sx "I/O LOG FILES" +for details on how I/O log files are stored. +.Ss Command environment +Since environment variables can influence program behavior, +.Nm sudoers +provides a means to restrict which variables from the user's +environment are inherited by the command to be run. +There are two +distinct ways +.Nm sudoers +can deal with environment variables. +.Pp +By default, the +.Em env_reset +option is enabled. +This causes commands +to be executed with a new, minimal environment. +On AIX (and Linux +systems without PAM), the environment is initialized with the +contents of the +.Pa /etc/environment +file. +.if \n(LC \{\ +On +.Bx +systems, if the +.Em use_loginclass +option is enabled, the environment is initialized +based on the +.Em path +and +.Em setenv +settings in +.Pa /etc/login.conf . +.\} +The new environment contains the +.Ev TERM , +.Ev PATH , +.Ev HOME , +.Ev MAIL , +.Ev SHELL , +.Ev LOGNAME , +.Ev USER +and +.Ev SUDO_* +variables +in addition to variables from the invoking process permitted by the +.Em env_check +and +.Em env_keep +options. +This is effectively a whitelist +for environment variables. +The environment variables +.Ev LOGNAME +and +.Ev USER +are treated specially. +If one of them is preserved (or removed) from user's environment, the other +will be as well. +If +.Ev LOGNAME +and +.Ev USER +are to be preserved but only one of them is present in the user's environment, +the other will be set to the same value. +This avoids an inconsistent environment where one of the variables +describing the user name is set to the invoking user and one is +set to the target user. +.Li () +are removed unless both the name and value parts are matched by +.Em env_keep +or +.Em env_check , +as they may be interpreted as functions by the +.Sy bash +shell. +Prior to version 1.8.11, such variables were always removed. +.Pp +If, however, the +.Em env_reset +option is disabled, any variables not +explicitly denied by the +.Em env_check +and +.Em env_delete +options are +inherited from the invoking process. +In this case, +.Em env_check +and +.Em env_delete +behave like a blacklist. +Prior to version 1.8.21, environment variables with a value beginning with +.Li () +were always removed. +Beginning with version 1.8.21, a pattern in +.Em env_delete +is used to match +.Sy bash +shell functions instead. +Since it is not possible +to blacklist all potentially dangerous environment variables, use +of the default +.Em env_reset +behavior is encouraged. +.Pp +Environment variables specified by +.Em env_check , +.Em env_delete , +or +.Em env_keep +may include one or more +.Ql * +characters which will match zero or more characters. +No other wildcard characters are supported. +.Pp +By default, environment variables are matched by name. +However, if the pattern includes an equal sign +.Pq Ql =\& , +both the variables name and value must match. +For example, a +.Sy bash +shell function could be matched as follows: +.Bd -literal -offset 4n +env_keep += "BASH_FUNC_my_func%%=()*" +.Ed +.Pp +Without the +.Dq Li =()* +suffix, this would not match, as +.Sy bash +shell functions are not preserved by default. +.Pp +The complete list of environment variables that +.Nm sudo +allows or denies is contained in the output of +.Dq Li sudo -V +when run as root. +Please note that this list varies based on the operating system +.Nm sudo +is running on. +.Pp +On systems that support PAM where the +.Sy pam_env +module is enabled for +.Nm sudo , +variables in the PAM environment may be merged in to the environment. +If a variable in the PAM environment is already present in the +user's environment, the value will only be overridden if the variable +was not preserved by +.Nm . +When +.Em env_reset +is enabled, variables preserved from the invoking user's environment +by the +.Em env_keep +list take precedence over those in the PAM environment. +When +.Em env_reset +is disabled, variables present the invoking user's environment +take precedence over those in the PAM environment unless they +match a pattern in the +.Em env_delete +list. +.Pp +Note that the dynamic linker on most operating systems will remove +variables that can control dynamic linking from the environment of +setuid executables, including +.Nm sudo . +Depending on the operating +system this may include +.Ev _RLD* , +.Ev DYLD_* , +.Ev LD_* , +.Ev LDR_* , +.Ev LIBPATH , +.Ev SHLIB_PATH , +and others. +These type of variables are +removed from the environment before +.Nm sudo +even begins execution +and, as such, it is not possible for +.Nm sudo +to preserve them. +.Pp +As a special case, if +.Nm sudo Ns 's +.Fl i +option (initial login) is +specified, +.Nm sudoers +will initialize the environment regardless +of the value of +.Em env_reset . +The +.Ev DISPLAY , +.Ev PATH +and +.Ev TERM +variables remain unchanged; +.Ev HOME , +.Ev MAIL , +.Ev SHELL , +.Ev USER , +and +.Ev LOGNAME +are set based on the target user. +On AIX (and Linux +systems without PAM), the contents of +.Pa /etc/environment +are also +included. +.if \n(LC \{\ +On +.Bx +systems, if the +.Em use_loginclass +flag is +enabled, the +.Em path +and +.Em setenv +variables in +.Pa /etc/login.conf +are also applied. +.\} +All other environment variables are removed unless permitted by +.Em env_keep +or +.Em env_check , +described above. +.Pp +Finally, the +.Em restricted_env_file +and +.Em env_file +files are applied, if present. +The variables in +.Em restricted_env_file +are applied first and are subject to the same restrictions as the +invoking user's environment, as detailed above. +The variables in +.Em env_file +are applied last and are not subject to these restrictions. +In both cases, variables present in the files will only be set to +their specified values if they would not conflict with an existing +environment variable. +.Sh SUDOERS FILE FORMAT +The +.Em sudoers +file is composed of two types of entries: aliases +(basically variables) and user specifications (which specify who +may run what). +.Pp +When multiple entries match for a user, they are applied in order. +Where there are multiple matches, the last match is used (which is +not necessarily the most specific match). +.Pp +The +.Em sudoers +file grammar will be described below in Extended Backus-Naur +Form (EBNF). +Don't despair if you are unfamiliar with EBNF; it is fairly simple, +and the definitions below are annotated. +.Ss Quick guide to EBNF +EBNF is a concise and exact way of describing the grammar of a language. +Each EBNF definition is made up of +.Em production rules . +E.g., +.Pp +.Li symbol ::= definition | alternate1 | alternate2 ... +.Pp +Each +.Em production rule +references others and thus makes up a +grammar for the language. +EBNF also contains the following +operators, which many readers will recognize from regular +expressions. +Do not, however, confuse them with +.Dq wildcard +characters, which have different meanings. +.Bl -tag -width 4n +.It Li \&? +Means that the preceding symbol (or group of symbols) is optional. +That is, it may appear once or not at all. +.It Li * +Means that the preceding symbol (or group of symbols) may appear +zero or more times. +.It Li + +Means that the preceding symbol (or group of symbols) may appear +one or more times. +.El +.Pp +Parentheses may be used to group symbols together. +For clarity, +we will use single quotes +.Pq '' +to designate what is a verbatim character string (as opposed to a symbol name). +.Ss Aliases +There are four kinds of aliases: +.Li User_Alias , +.Li Runas_Alias , +.Li Host_Alias +and +.Li Cmnd_Alias . +.Bd -literal +Alias ::= 'User_Alias' User_Alias_Spec (':' User_Alias_Spec)* | + 'Runas_Alias' Runas_Alias_Spec (':' Runas_Alias_Spec)* | + 'Host_Alias' Host_Alias_Spec (':' Host_Alias_Spec)* | + 'Cmnd_Alias' Cmnd_Alias_Spec (':' Cmnd_Alias_Spec)* + +User_Alias ::= NAME + +User_Alias_Spec ::= User_Alias '=' User_List + +Runas_Alias ::= NAME + +Runas_Alias_Spec ::= Runas_Alias '=' Runas_List + +Host_Alias ::= NAME + +Host_Alias_Spec ::= Host_Alias '=' Host_List + +Cmnd_Alias ::= NAME + +Cmnd_Alias_Spec ::= Cmnd_Alias '=' Cmnd_List + +NAME ::= [A-Z]([A-Z][0-9]_)* +.Ed +.Pp +Each +.Em alias +definition is of the form +.Bd -literal +Alias_Type NAME = item1, item2, ... +.Ed +.Pp +where +.Em Alias_Type +is one of +.Li User_Alias , +.Li Runas_Alias , +.Li Host_Alias , +or +.Li Cmnd_Alias . +A +.Li NAME +is a string of uppercase letters, numbers, +and underscore characters +.Pq Ql _ . +A +.Li NAME +.Sy must +start with an +uppercase letter. +It is possible to put several alias definitions +of the same type on a single line, joined by a colon +.Pq Ql :\& . +E.g., +.Bd -literal +Alias_Type NAME = item1, item2, item3 : NAME = item4, item5 +.Ed +.Pp +It is a syntax error to redefine an existing +.Em alias . +It is possible to use the same name for +.Em aliases +of different types, but this is not recommended. +.Pp +The definitions of what constitutes a valid +.Em alias +member follow. +.Bd -literal +User_List ::= User | + User ',' User_List + +User ::= '!'* user name | + '!'* #uid | + '!'* %group | + '!'* %#gid | + '!'* +netgroup | + '!'* %:nonunix_group | + '!'* %:#nonunix_gid | + '!'* User_Alias +.Ed +.Pp +A +.Li User_List +is made up of one or more user names, user IDs +(prefixed with +.Ql # ) , +system group names and IDs (prefixed with +.Ql % +and +.Ql %# +respectively), netgroups (prefixed with +.Ql + ) , +non-Unix group names and IDs (prefixed with +.Ql %: +and +.Ql %:# +respectively) and +.Li User_Alias Ns es. +Each list item may be prefixed with zero or more +.Ql \&! +operators. +An odd number of +.Ql \&! +operators negate the value of +the item; an even number just cancel each other out. +User netgroups are matched using the user and domain members only; +the host member is not used when matching. +.Pp +A +.Li user name , +.Li uid , +.Li group , +.Li gid , +.Li netgroup , +.Li nonunix_group +or +.Li nonunix_gid +may be enclosed in double quotes to avoid the +need for escaping special characters. +Alternately, special characters +may be specified in escaped hex mode, e.g., \ex20 for space. +When +using double quotes, any prefix characters must be included inside +the quotes. +.Pp +The actual +.Li nonunix_group +and +.Li nonunix_gid +syntax depends on +the underlying group provider plugin. +For instance, the QAS AD plugin supports the following formats: +.Bl -bullet -width 1n +.It +Group in the same domain: "%:Group Name" +.It +Group in any domain: "%:Group Name@FULLY.QUALIFIED.DOMAIN" +.It +Group SID: "%:S-1-2-34-5678901234-5678901234-5678901234-567" +.El +.Pp +See +.Sx "GROUP PROVIDER PLUGINS" +for more information. +.Pp +Note that quotes around group names are optional. +Unquoted strings must use a backslash +.Pq Ql \e +to escape spaces and special characters. +See +.Sx Other special characters and reserved words +for a list of +characters that need to be escaped. +.Bd -literal +Runas_List ::= Runas_Member | + Runas_Member ',' Runas_List + +Runas_Member ::= '!'* user name | + '!'* #uid | + '!'* %group | + '!'* %#gid | + '!'* %:nonunix_group | + '!'* %:#nonunix_gid | + '!'* +netgroup | + '!'* Runas_Alias +.Ed +.Pp +A +.Li Runas_List +is similar to a +.Li User_List +except that instead +of +.Li User_Alias Ns es +it can contain +.Li Runas_Alias Ns es . +Note that +user names and groups are matched as strings. +In other words, two +users (groups) with the same uid (gid) are considered to be distinct. +If you wish to match all user names with the same uid (e.g., +root and toor), you can use a uid instead (#0 in the example given). +.Bd -literal +Host_List ::= Host | + Host ',' Host_List + +Host ::= '!'* host name | + '!'* ip_addr | + '!'* network(/netmask)? | + '!'* +netgroup | + '!'* Host_Alias +.Ed +.Pp +A +.Li Host_List +is made up of one or more host names, IP addresses, +network numbers, netgroups (prefixed with +.Ql + ) +and other aliases. +Again, the value of an item may be negated with the +.Ql \&! +operator. +Host netgroups are matched using the host (both qualified and unqualified) +and domain members only; the user member is not used when matching. +If you specify a network number without a netmask, +.Nm sudo +will query each of the local host's network interfaces and, +if the network number corresponds to one of the hosts's network +interfaces, will use the netmask of that interface. +The netmask may be specified either in standard IP address notation +(e.g., 255.255.255.0 or ffff:ffff:ffff:ffff::), +or CIDR notation (number of bits, e.g., 24 or 64). +A host name may include shell-style wildcards (see the +.Sx Wildcards +section below), +but unless the +.Li host name +command on your machine returns the fully +qualified host name, you'll need to use the +.Em fqdn +option for wildcards to be useful. +Note that +.Nm sudo +only inspects actual network interfaces; this means that IP address +127.0.0.1 (localhost) will never match. +Also, the host name +.Dq localhost +will only match if that is the actual host name, which is usually +only the case for non-networked systems. +.Bd -literal +digest ::= [A-Fa-f0-9]+ | + [[A-Za-z0-9\+/=]+ + +Digest_Spec ::= "sha224" ':' digest | + "sha256" ':' digest | + "sha384" ':' digest | + "sha512" ':' digest + +Cmnd_List ::= Cmnd | + Cmnd ',' Cmnd_List + +command name ::= file name | + file name args | + file name '""' + +Cmnd ::= Digest_Spec? '!'* command name | + '!'* directory | + '!'* "sudoedit" | + '!'* Cmnd_Alias +.Ed +.Pp +A +.Li Cmnd_List +is a list of one or more command names, directories, and other aliases. +A command name is a fully qualified file name which may include +shell-style wildcards (see the +.Sx Wildcards +section below). +A simple file name allows the user to run the command with any +arguments he/she wishes. +However, you may also specify command line arguments (including +wildcards). +Alternately, you can specify +.Li \&"" +to indicate that the command +may only be run +.Sy without +command line arguments. +A directory is a +fully qualified path name ending in a +.Ql / . +When you specify a directory in a +.Li Cmnd_List , +the user will be able to run any file within that directory +(but not in any sub-directories therein). +.Pp +If a +.Li Cmnd +has associated command line arguments, then the arguments +in the +.Li Cmnd +must match exactly those given by the user on the command line +(or match the wildcards if there are any). +Note that the following characters must be escaped with a +.Ql \e +if they are used in command arguments: +.Ql ,\& , +.Ql :\& , +.Ql =\& , +.Ql \e . +The built-in command +.Dq Li sudoedit +is used to permit a user to run +.Nm sudo +with the +.Fl e +option (or as +.Nm sudoedit ) . +It may take command line arguments just as a normal command does. +Note that +.Dq Li sudoedit +is a command built into +.Nm sudo +itself and must be specified in the +.Em sudoers +file without a leading path. +.Pp +If a +.Li command name +is prefixed with a +.Li Digest_Spec , +the command will only match successfully if it can be verified +using the specified SHA-2 digest. +The following digest formats are supported: sha224, sha256, sha384 and sha512. +The string may be specified in either hex or base64 format +(base64 is more compact). +There are several utilities capable of generating SHA-2 digests in hex +format such as openssl, shasum, sha224sum, sha256sum, sha384sum, sha512sum. +.Pp +For example, using openssl: +.Bd -literal +$ openssl dgst -sha224 /bin/ls +SHA224(/bin/ls)= 118187da8364d490b4a7debbf483004e8f3e053ec954309de2c41a25 +.Ed +.Pp +It is also possible to use openssl to generate base64 output: +.Bd -literal +$ openssl dgst -binary -sha224 /bin/ls | openssl base64 +EYGH2oNk1JC0p9679IMATo8+BT7JVDCd4sQaJQ== +.Ed +.Pp +Warning, if the user has write access to the command itself (directly or via a +.Nm sudo +command), it may be possible for the user to replace the command after the +digest check has been performed but before the command is executed. +A similar race condition exists on systems that lack the +.Xr fexecve 2 +system call when the directory in which the command is located +is writable by the user. +See the description of the +.Em fdexec +setting for more information on how +.Nm sudo +executes commands that have an associated digest. +.Pp +Command digests are only supported by version 1.8.7 or higher. +.Ss Defaults +Certain configuration options may be changed from their default +values at run-time via one or more +.Li Default_Entry +lines. +These may affect all users on any host, all users on a specific host, a +specific user, a specific command, or commands being run as a specific user. +Note that per-command entries may not include command line arguments. +If you need to specify arguments, define a +.Li Cmnd_Alias +and reference +that instead. +.Bd -literal +Default_Type ::= 'Defaults' | + 'Defaults' '@' Host_List | + 'Defaults' ':' User_List | + 'Defaults' '!' Cmnd_List | + 'Defaults' '>' Runas_List + +Default_Entry ::= Default_Type Parameter_List + +Parameter_List ::= Parameter | + Parameter ',' Parameter_List + +Parameter ::= Parameter '=' Value | + Parameter '+=' Value | + Parameter '-=' Value | + '!'* Parameter +.Ed +.Pp +Parameters may be +.Sy flags , +.Sy integer +values, +.Sy strings , +or +.Sy lists . +Flags are implicitly boolean and can be turned off via the +.Ql \&! +operator. +Some integer, string and list parameters may also be +used in a boolean context to disable them. +Values may be enclosed +in double quotes +.Pq \&"" +when they contain multiple words. +Special characters may be escaped with a backslash +.Pq Ql \e . +.Pp +Lists have two additional assignment operators, +.Li += +and +.Li -= . +These operators are used to add to and delete from a list respectively. +It is not an error to use the +.Li -= +operator to remove an element +that does not exist in a list. +.Pp +Defaults entries are parsed in the following order: generic, host, +user and runas Defaults first, then command defaults. +If there are multiple Defaults settings of the same type, the last +matching setting is used. +The following Defaults settings are parsed before all others since +they may affect subsequent entries: +.Em fqdn , +.Em group_plugin , +.Em runas_default , +.Em sudoers_locale . +.Pp +See +.Sx SUDOERS OPTIONS +for a list of supported Defaults parameters. +.Ss User specification +.Bd -literal +User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \e + (':' Host_List '=' Cmnd_Spec_List)* + +Cmnd_Spec_List ::= Cmnd_Spec | + Cmnd_Spec ',' Cmnd_Spec_List + +Cmnd_Spec ::= Runas_Spec? Option_Spec* Tag_Spec* Cmnd + +Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')' + +.ie \n(SL \{\ +.ie \n(PS Option_Spec ::= (SELinux_Spec | Solaris_Priv_Spec | Date_Spec | Timeout_Spec) +.el Option_Spec ::= (SELinux_Spec | Date_Spec | Timeout_Spec) +.\} +.el \{\ +.ie \n(PS Option_Spec ::= (Solaris_Priv_Spec | Date_Spec | Timeout_Spec) +.el Option_Spec ::= (Date_Spec | Timeout_Spec) +.\} + +.if \n(SL \{\ +SELinux_Spec ::= ('ROLE=role' | 'TYPE=type') + +.\} +.if \n(PS \{\ +Solaris_Priv_Spec ::= ('PRIVS=privset' | 'LIMITPRIVS=privset') + +.\} +Date_Spec ::= ('NOTBEFORE=timestamp' | 'NOTAFTER=timestamp') + +Timeout_Spec ::= 'TIMEOUT=timeout' + +Tag_Spec ::= ('EXEC:' | 'NOEXEC:' | 'FOLLOW:' | 'NOFOLLOW' | + 'LOG_INPUT:' | 'NOLOG_INPUT:' | 'LOG_OUTPUT:' | + 'NOLOG_OUTPUT:' | 'MAIL:' | 'NOMAIL:' | 'PASSWD:' | + 'NOPASSWD:' | 'SETENV:' | 'NOSETENV:') +.Ed +.Pp +A +.Sy user specification +determines which commands a user may run +(and as what user) on specified hosts. +By default, commands are +run as +.Sy root , +but this can be changed on a per-command basis. +.Pp +The basic structure of a user specification is +.Dq who where = (as_whom) what . +Let's break that down into its constituent parts: +.Ss Runas_Spec +A +.Li Runas_Spec +determines the user and/or the group that a command +may be run as. +A fully-specified +.Li Runas_Spec +consists of two +.Li Runas_List Ns s +(as defined above) separated by a colon +.Pq Ql :\& +and enclosed in a set of parentheses. +The first +.Li Runas_List +indicates +which users the command may be run as via +.Nm sudo Ns 's +.Fl u +option. +The second defines a list of groups that can be specified via +.Nm sudo Ns 's +.Fl g +option in addition to any of the target user's groups. +If both +.Li Runas_List Ns s +are specified, the command may be run with any combination of users +and groups listed in their respective +.Li Runas_List Ns s. +If only the first is specified, the command may be run as any user +in the list but no +.Fl g +option +may be specified. +If the first +.Li Runas_List +is empty but the +second is specified, the command may be run as the invoking user +with the group set to any listed in the +.Li Runas_List . +If both +.Li Runas_List Ns s +are empty, the command may only be run as the invoking user. +If no +.Li Runas_Spec +is specified the command may be run as +.Sy root +and +no group may be specified. +.Pp +A +.Li Runas_Spec +sets the default for the commands that follow it. +What this means is that for the entry: +.Bd -literal +dgb boulder = (operator) /bin/ls, /bin/kill, /usr/bin/lprm +.Ed +.Pp +The user +.Sy dgb +may run +.Pa /bin/ls , +.Pa /bin/kill , +and +.Pa /usr/bin/lprm +on the host +.No boulder Ns \(em Ns but +only as +.Sy operator . +E.g., +.Bd -literal +$ sudo -u operator /bin/ls +.Ed +.Pp +It is also possible to override a +.Li Runas_Spec +later on in an entry. +If we modify the entry like so: +.Bd -literal +dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm +.Ed +.Pp +Then user +.Sy dgb +is now allowed to run +.Pa /bin/ls +as +.Sy operator , +but +.Pa /bin/kill +and +.Pa /usr/bin/lprm +as +.Sy root . +.Pp +We can extend this to allow +.Sy dgb +to run +.Li /bin/ls +with either +the user or group set to +.Sy operator : +.Bd -literal +dgb boulder = (operator : operator) /bin/ls, (root) /bin/kill,\e + /usr/bin/lprm +.Ed +.Pp +Note that while the group portion of the +.Li Runas_Spec +permits the +user to run as command with that group, it does not force the user +to do so. +If no group is specified on the command line, the command +will run with the group listed in the target user's password database +entry. +The following would all be permitted by the sudoers entry above: +.Bd -literal +$ sudo -u operator /bin/ls +$ sudo -u operator -g operator /bin/ls +$ sudo -g operator /bin/ls +.Ed +.Pp +In the following example, user +.Sy tcm +may run commands that access +a modem device file with the dialer group. +.Bd -literal +tcm boulder = (:dialer) /usr/bin/tip, /usr/bin/cu,\e + /usr/local/bin/minicom +.Ed +.Pp +Note that in this example only the group will be set, the command +still runs as user +.Sy tcm . +E.g.\& +.Bd -literal +$ sudo -g dialer /usr/bin/cu +.Ed +.Pp +Multiple users and groups may be present in a +.Li Runas_Spec , +in which case the user may select any combination of users and groups via the +.Fl u +and +.Fl g +options. +In this example: +.Bd -literal +alan ALL = (root, bin : operator, system) ALL +.Ed +.Pp +user +.Sy alan +may run any command as either user root or bin, +optionally setting the group to operator or system. +.Ss Option_Spec +A +.Li Cmnd +may have zero or more options associated with it. +Options may consist of +.if \n(SL \{\ +SELinux roles and/or types, +.\} +.if \n(PS \{\ +Solaris privileges sets, +.\} +start and/or end dates and command timeouts. +Once an option is set for a +.Li Cmnd , +subsequent +.Li Cmnd Ns s +in the +.Li Cmnd_Spec_List , +inherit that option unless it is overridden by another option. +.if \n(SL \{\ +.Ss SELinux_Spec +On systems with SELinux support, +.Em sudoers +file entries may optionally have an SELinux role and/or type associated +with a command. +If a role or +type is specified with the command it will override any default values +specified in +.Em sudoers . +A role or type specified on the command line, +however, will supersede the values in +.Em sudoers . +.\} +.if \n(PS \{\ +.Ss Solaris_Priv_Spec +On Solaris systems, +.Em sudoers +file entries may optionally specify Solaris privilege set and/or limit +privilege set associated with a command. +If privileges or limit privileges are specified with the command +it will override any default values specified in +.Em sudoers . +.Pp +A privilege set is a comma-separated list of privilege names. +The +.Xr ppriv 1 +command can be used to list all privileges known to the system. +For example: +.Bd -literal +$ ppriv -l +.Ed +.Pp +In addition, there are several +.Dq special +privilege strings: +.Bl -tag -width 8n +.It none +the empty set +.It all +the set of all privileges +.It zone +the set of all privileges available in the current zone +.It basic +the default set of privileges normal users are granted at login time +.El +.Pp +Privileges can be excluded from a set by prefixing the privilege +name with either an +.Ql \&! +or +.Ql \- +character. +.\} +.Ss Date_Spec +.Nm sudoers +rules can be specified with a start and end date via the +.Li NOTBEFORE +and +.Li NOTAFTER +settings. +The time stamp must be specified in +.Em Generalized Time +as defined by RFC 4517. +The format is effectively +.Li yyyymmddHHMMSSZ +where the minutes and seconds are optional. +The +.Ql Z +suffix indicates that the time stamp is in Coordinated Universal Time (UTC). +It is also possible to specify a timezone offset from UTC in hours +and minutes instead of a +.Ql Z . +For example, +.Ql -0500 +would correspond to Eastern Standard time in the US. +As an extension, if no +.Ql Z +or timezone offset is specified, local time will be used. +.Pp +The following are all valid time stamps: +.Bd -literal -offset 4n +20170214083000Z +2017021408Z +20160315220000-0500 +20151201235900 +.Ed +.Ss Timeout_Spec +A command may have a timeout associated with it. +If the timeout expires before the command has exited, the +command will be terminated. +The timeout may be specified in combinations of days, hours, +minutes and seconds with a single-letter case-insensitive suffix +that indicates the unit of time. +For example, a timeout of 7 days, 8 hours, 30 minutes and +10 seconds would be written as +.Li 7d8h30m10s . +If a number is specified without a unit, seconds are assumed. +Any of the days, minutes, hours or seconds may be omitted. +The order must be from largest to smallest unit and a unit +may not be specified more than once. +.Pp +The following are all +.Em valid +timeout values: +.Li 7d8h30m10s , +.Li 14d , +.Li 8h30m , +.Li 600s , +.Li 3600 . +The following are +.Em invalid +timeout values: +.Li 12m2w1d , +.Li 30s10m4h , +.Li 1d2d3h . +.Pp +This option is only supported by version 1.8.20 or higher. +.Ss Tag_Spec +A command may have zero or more tags associated with it. +The following tag values are supported: +.Li EXEC , +.Li NOEXEC , +.Li FOLLOW , +.Li NOFOLLOW , +.Li LOG_INPUT , +.Li NOLOG_INPUT , +.Li LOG_OUTPUT , +.Li NOLOG_OUTPUT , +.Li MAIL , +.Li NOMAIL , +.Li PASSWD , +.Li NOPASSWD , +.Li SETENV , +and +.Li NOSETENV . +Once a tag is set on a +.Li Cmnd , +subsequent +.Li Cmnd Ns s +in the +.Li Cmnd_Spec_List , +inherit the tag unless it is overridden by the opposite tag (in other words, +.Li PASSWD +overrides +.Li NOPASSWD +and +.Li NOEXEC +overrides +.Li EXEC ) . +.Bl -hang -width 0n +.It Em EXEC No and Em NOEXEC +.sp +If +.Nm sudo +has been compiled with +.Em noexec +support and the underlying operating system supports it, the +.Li NOEXEC +tag can be used to prevent a dynamically-linked executable from +running further commands itself. +.Pp +In the following example, user +.Sy aaron +may run +.Pa /usr/bin/more +and +.Pa /usr/bin/vi +but shell escapes will be disabled. +.Bd -literal +aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi +.Ed +.Pp +See the +.Sx Preventing shell escapes +section below for more details on how +.Li NOEXEC +works and whether or not it will work on your system. +.It Em FOLLOW No and Em NOFOLLOW +Starting with version 1.8.15, +.Nm sudoedit +will not open a file that is a symbolic link unless the +.Em sudoedit_follow +option is enabled. +The +.Em FOLLOW +and +.Em NOFOLLOW +tags override the value of +.Em sudoedit_follow +and can be used to permit (or deny) the editing of symbolic links +on a per-command basis. +These tags are only effective for the +.Em sudoedit +command and are ignored for all other commands. +.It Em LOG_INPUT No and Em NOLOG_INPUT +.sp +These tags override the value of the +.Em log_input +option on a per-command basis. +For more information, see the description of +.Em log_input +in the +.Sx SUDOERS OPTIONS +section below. +.It Em LOG_OUTPUT No and Em NOLOG_OUTPUT +.sp +These tags override the value of the +.Em log_output +option on a per-command basis. +For more information, see the description of +.Em log_output +in the +.Sx SUDOERS OPTIONS +section below. +.It Em MAIL No and Em NOMAIL +.sp +These tags provide fine-grained control over whether +mail will be sent when a user runs a command by +overriding the value of the +.Em mail_all_cmnds +option on a per-command basis. +They have no effect when +.Nm sudo +is run with the +.Fl l +or +.Fl v +options. +A +.Em NOMAIL +tag will also override the +.Em mail_always +and +.Em mail_no_perms +options. +For more information, see the descriptions of +.Em mail_all_cmnds , +.Em mail_always , +and +.Em mail_no_perms +in the +.Sx SUDOERS OPTIONS +section below. +.It Em PASSWD No and Em NOPASSWD +.sp +By default, +.Nm sudo +requires that a user authenticate him or herself +before running a command. +This behavior can be modified via the +.Li NOPASSWD +tag. +Like a +.Li Runas_Spec , +the +.Li NOPASSWD +tag sets +a default for the commands that follow it in the +.Li Cmnd_Spec_List . +Conversely, the +.Li PASSWD +tag can be used to reverse things. +For example: +.Bd -literal +ray rushmore = NOPASSWD: /bin/kill, /bin/ls, /usr/bin/lprm +.Ed +.Pp +would allow the user +.Sy ray +to run +.Pa /bin/kill , +.Pa /bin/ls , +and +.Pa /usr/bin/lprm +as +.Sy root +on the machine rushmore without authenticating himself. +If we only want +.Sy ray +to be able to +run +.Pa /bin/kill +without a password the entry would be: +.Bd -literal +ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm +.Ed +.Pp +Note, however, that the +.Li PASSWD +tag has no effect on users who are in the group specified by the +.Em exempt_group +option. +.Pp +By default, if the +.Li NOPASSWD +tag is applied to any of the entries for a user on the current host, +he or she will be able to run +.Dq Li sudo -l +without a password. +Additionally, a user may only run +.Dq Li sudo -v +without a password if the +.Li NOPASSWD +tag is present for all a user's entries that pertain to the current host. +This behavior may be overridden via the +.Em verifypw +and +.Em listpw +options. +.It Em SETENV No and Em NOSETENV +.sp +These tags override the value of the +.Em setenv +option on a per-command basis. +Note that if +.Li SETENV +has been set for a command, the user may disable the +.Em env_reset +option from the command line via the +.Fl E +option. +Additionally, environment variables set on the command +line are not subject to the restrictions imposed by +.Em env_check , +.Em env_delete , +or +.Em env_keep . +As such, only trusted users should be allowed to set variables in this manner. +If the command matched is +.Sy ALL , +the +.Li SETENV +tag is implied for that command; this default may be overridden by use of the +.Li NOSETENV +tag. +.El +.Ss Wildcards +.Nm sudo +allows shell-style +.Em wildcards +(aka meta or glob characters) +to be used in host names, path names and command line arguments in the +.Em sudoers +file. +Wildcard matching is done via the +.Xr glob 3 +and +.Xr fnmatch 3 +functions as specified by +.St -p1003.1 . +.Bl -tag -width 8n +.It Li * +Matches any set of zero or more characters (including white space). +.It Li \&? +Matches any single character (including white space). +.It Li [...] +Matches any character in the specified range. +.It Li [!...] +Matches any character +.Em not +in the specified range. +.It Li \ex +For any character +.Sq x , +evaluates to +.Sq x . +This is used to escape special characters such as: +.Ql * , +.Ql \&? , +.Ql [\& , +and +.Ql ]\& . +.El +.Pp +.Bf -symbolic +Note that these are not regular expressions. +.Ef +Unlike a regular expression there is no way to match one or more +characters within a range. +.Pp +Character classes may be used if your system's +.Xr glob 3 +and +.Xr fnmatch 3 +functions support them. +However, because the +.Ql :\& +character has special meaning in +.Em sudoers , +it must be +escaped. +For example: +.Bd -literal -offset 4n +/bin/ls [[\e:\&alpha\e:\&]]* +.Ed +.Pp +Would match any file name beginning with a letter. +.Pp +Note that a forward slash +.Pq Ql / +will +.Em not +be matched by +wildcards used in the file name portion of the command. +This is to make a path like: +.Bd -literal -offset 4n +/usr/bin/* +.Ed +.Pp +match +.Pa /usr/bin/who +but not +.Pa /usr/bin/X11/xterm . +.Pp +When matching the command line arguments, however, a slash +.Em does +get matched by wildcards since command line arguments may contain +arbitrary strings and not just path names. +.Pp +.Bf -symbolic +Wildcards in command line arguments should be used with care. +.Ef +.br +Command line arguments are matched as a single, concatenated string. +This mean a wildcard character such as +.Ql \&? +or +.Ql * +will match across word boundaries, which may be unexpected. +For example, while a sudoers entry like: +.Bd -literal -offset 4n +%operator ALL = /bin/cat /var/log/messages* +.Ed +.Pp +will allow command like: +.Bd -literal -offset 4n +$ sudo cat /var/log/messages.1 +.Ed +.Pp +It will also allow: +.Bd -literal -offset 4n +$ sudo cat /var/log/messages /etc/shadow +.Ed +.Pp +which is probably not what was intended. +In most cases it is better to do command line processing +outside of the +.Em sudoers +file in a scripting language. +.Ss Exceptions to wildcard rules +The following exceptions apply to the above rules: +.Bl -tag -width 8n +.It Li \&"" +If the empty string +.Li \&"" +is the only command line argument in the +.Em sudoers +file entry it means that command is not allowed to be run with +.Em any +arguments. +.It sudoedit +Command line arguments to the +.Em sudoedit +built-in command should always be path names, so a forward slash +.Pq Ql / +will not be matched by a wildcard. +.El +.Ss Including other files from within sudoers +It is possible to include other +.Em sudoers +files from within the +.Em sudoers +file currently being parsed using the +.Li #include +and +.Li #includedir +directives. +.Pp +This can be used, for example, to keep a site-wide +.Em sudoers +file in addition to a local, per-machine file. +For the sake of this example the site-wide +.Em sudoers +file will be +.Pa /etc/sudoers +and the per-machine one will be +.Pa /etc/sudoers.local . +To include +.Pa /etc/sudoers.local +from within +.Pa /etc/sudoers +we would use the +following line in +.Pa /etc/sudoers : +.Bd -literal -offset 4n +#include /etc/sudoers.local +.Ed +.Pp +When +.Nm sudo +reaches this line it will suspend processing of the current file +.Pq Pa /etc/sudoers +and switch to +.Pa /etc/sudoers.local . +Upon reaching the end of +.Pa /etc/sudoers.local , +the rest of +.Pa /etc/sudoers +will be processed. +Files that are included may themselves include other files. +A hard limit of 128 nested include files is enforced to prevent include +file loops. +.Pp +If the path to the include file is not fully-qualified (does not +begin with a +.Ql / ) , +it must be located in the same directory as the sudoers file it was +included from. +For example, if +.Pa /etc/sudoers +contains the line: +.Bd -literal -offset 4n +.Li #include sudoers.local +.Ed +.Pp +the file that will be included is +.Pa /etc/sudoers.local . +.Pp +The file name may also include the +.Li %h +escape, signifying the short form of the host name. +In other words, if the machine's host name is +.Dq xerxes , +then +.Bd -literal -offset 4n +#include /etc/sudoers.%h +.Ed +.Pp +will cause +.Nm sudo +to include the file +.Pa /etc/sudoers.xerxes . +.Pp +The +.Li #includedir +directive can be used to create a +.Pa sudoers.d +directory that the system package manager can drop +.Em sudoers +file rules into as part of package installation. +For example, given: +.Bd -literal -offset 4n +#includedir /etc/sudoers.d +.Ed +.Pp +.Nm sudo +will suspend processing of the current file and read each file in +.Pa /etc/sudoers.d , +skipping file names that end in +.Ql ~ +or contain a +.Ql .\& +character to avoid causing problems with package manager or editor +temporary/backup files. +Files are parsed in sorted lexical order. +That is, +.Pa /etc/sudoers.d/01_first +will be parsed before +.Pa /etc/sudoers.d/10_second . +Be aware that because the sorting is lexical, not numeric, +.Pa /etc/sudoers.d/1_whoops +would be loaded +.Em after +.Pa /etc/sudoers.d/10_second . +Using a consistent number of leading zeroes in the file names can be used +to avoid such problems. +After parsing the files in the directory, control returns to the +file that contained the +.Li #includedir +directive. +.Pp +Note that unlike files included via +.Li #include , +.Nm visudo +will not edit the files in a +.Li #includedir +directory unless one of them contains a syntax error. +It is still possible to run +.Nm visudo +with the +.Fl f +flag to edit the files directly, but this will not catch the +redefinition of an +.Em alias +that is also present in a different file. +.Ss Other special characters and reserved words +The pound sign +.Pq Ql # +is used to indicate a comment (unless it is part of a #include +directive or unless it occurs in the context of a user name and is +followed by one or more digits, in which case it is treated as a +uid). +Both the comment character and any text after it, up to the end of +the line, are ignored. +.Pp +The reserved word +.Sy ALL +is a built-in +.Em alias +that always causes a match to succeed. +It can be used wherever one might otherwise use a +.Li Cmnd_Alias , +.Li User_Alias , +.Li Runas_Alias , +or +.Li Host_Alias . +You should not try to define your own +.Em alias +called +.Sy ALL +as the built-in alias will be used in preference to your own. +Please note that using +.Sy ALL +can be dangerous since in a command context, it allows the user to run +.Em any +command on the system. +.Pp +An exclamation point +.Pq Ql \&! +can be used as a logical +.Em not +operator in a list or +.Em alias +as well as in front of a +.Li Cmnd . +This allows one to exclude certain values. +For the +.Ql \&! +operator to be effective, there must be something for it to exclude. +For example, to match all users except for root one would use: +.Bd -literal -offset 4n +ALL,!root +.Ed +.Pp +If the +.Sy ALL , +is omitted, as in: +.Bd -literal -offset 4n +!root +.Ed +.Pp +it would explicitly deny root but not match any other users. +This is different from a true +.Dq negation +operator. +.Pp +Note, however, that using a +.Ql \&! +in conjunction with the built-in +.Sy ALL +alias to allow a user to run +.Dq all but a few +commands rarely works as intended (see +.Sx SECURITY NOTES +below). +.Pp +Long lines can be continued with a backslash +.Pq Ql \e +as the last character on the line. +.Pp +White space between elements in a list as well as special syntactic +characters in a +.Em User Specification +.Po +.Ql =\& , +.Ql :\& , +.Ql (\& , +.Ql )\& +.Pc +is optional. +.Pp +The following characters must be escaped with a backslash +.Pq Ql \e +when used as part of a word (e.g., a user name or host name): +.Ql \&! , +.Ql =\& , +.Ql :\& , +.Ql ,\& , +.Ql (\& , +.Ql )\& , +.Ql \e . +.Sh SUDOERS OPTIONS +.Nm sudo Ns 's +behavior can be modified by +.Li Default_Entry +lines, as explained earlier. +A list of all supported Defaults parameters, grouped by type, are listed below. +.Pp +.Sy Boolean Flags : +.Bl -tag -width 16n +.It always_query_group_plugin +If a +.Em group_plugin +is configured, use it to resolve groups of the form %group as long +as there is not also a system group of the same name. +Normally, only groups of the form %:group are passed to the +.Em group_plugin . +This flag is +.Em off +by default. +.It always_set_home +If enabled, +.Nm sudo +will set the +.Ev HOME +environment variable to the home directory of the target user +(which is root unless the +.Fl u +option is used). +This effectively means that the +.Fl H +option is always implied. +Note that by default, +.Ev HOME +will be set to the home directory of the target user when the +.Em env_reset +option is enabled, so +.Em always_set_home +only has an effect for configurations where either +.Em env_reset +is disabled or +.Ev HOME +is present in the +.Em env_keep +list. +This flag is +.Em off +by default. +.It authenticate +If set, users must authenticate themselves via a password (or other +means of authentication) before they may run commands. +This default may be overridden via the +.Li PASSWD +and +.Li NOPASSWD +tags. +This flag is +.Em on +by default. +.It case_insensitive_group +If enabled, group names in +.Em sudoers +will be matched in a case insensitive manner. +This may be necessary when users are stored in LDAP or AD. +This flag is +.Em on +by default. +.It case_insensitive_user +If enabled, user names in +.Em sudoers +will be matched in a case insensitive manner. +This may be necessary when groups are stored in LDAP or AD. +This flag is +.Em on +by default. +.It closefrom_override +If set, the user may use +.Nm sudo Ns 's +.Fl C +option which overrides the default starting point at which +.Nm sudo +begins closing open file descriptors. +This flag is +.Em off +by default. +.It compress_io +If set, and +.Nm sudo +is configured to log a command's input or output, +the I/O logs will be compressed using +.Sy zlib . +This flag is +.Em on +by default when +.Nm sudo +is compiled with +.Sy zlib +support. +.It exec_background +By default, +.Nm sudo +runs a command as the foreground process as long as +.Nm sudo +itself is running in the foreground. +When the +.Em exec_background +flag is enabled and the command is being run in a pty (due to I/O logging +or the +.Em use_pty +flag), the command will be run as a background process. +Attempts to read from the controlling terminal (or to change terminal +settings) will result in the command being suspended with the +.Dv SIGTTIN +signal (or +.Dv SIGTTOU +in the case of terminal settings). +If this happens when +.Nm sudo +is a foreground process, the command will be granted the controlling terminal +and resumed in the foreground with no user intervention required. +The advantage of initially running the command in the background is that +.Nm sudo +need not read from the terminal unless the command explicitly requests it. +Otherwise, any terminal input must be passed to the command, whether it +has required it or not (the kernel buffers terminals so it is not possible +to tell whether the command really wants the input). +This is different from historic +.Em sudo +behavior or when the command is not being run in a pty. +.Pp +For this to work seamlessly, the operating system must support the +automatic restarting of system calls. +Unfortunately, not all operating systems do this by default, +and even those that do may have bugs. +For example, macOS fails to restart the +.Fn tcgetattr +and +.Fn tcsetattr +system calls (this is a bug in macOS). +Furthermore, because this behavior depends on the command stopping with the +.Dv SIGTTIN +or +.Dv SIGTTOU +signals, programs that catch these signals and suspend themselves +with a different signal (usually +.Dv SIGTOP ) +will not be automatically foregrounded. +Some versions of the linux +.Xr su 1 +command behave this way. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.7 or higher. +It has no effect unless I/O logging is enabled or the +.Em use_pty +flag is enabled. +.It env_editor +If set, +.Nm visudo +will use the value of the +.Ev SUDO_EDITOR , +.Ev VISUAL +or +.Ev EDITOR +environment variables before falling back on the default editor list. +Note that this may create a security hole as it allows the user to +run any arbitrary command as root without logging. +A safer alternative is to place a colon-separated list of editors +in the +.Em editor +variable. +.Nm visudo +will then only use +.Ev SUDO_EDITOR , +.Ev VISUAL +or +.Ev EDITOR +if they match a value specified in +.Em editor . +If the +.Em env_reset +flag is enabled, the +.Ev SUDO_EDITOR , +.Ev VISUAL +and/or +.Ev EDITOR +environment variables must be present in the +.Em env_keep +list for the +.Em env_editor +flag to function when +.Nm visudo +is invoked via +.Nm sudo . +This flag is +.Em @env_editor@ +by default. +.It env_reset +If set, +.Nm sudo +will run the command in a minimal environment containing the +.Ev TERM , +.Ev PATH , +.Ev HOME , +.Ev MAIL , +.Ev SHELL , +.Ev LOGNAME , +.Ev USER +and +.Ev SUDO_* +variables. +Any variables in the caller's environment or in the file specified +by the +.Em restricted_env_file +option that match the +.Li env_keep +and +.Li env_check +lists are then added, followed by any variables present in the file +specified by the +.Em env_file +option (if any). +The contents of the +.Li env_keep +and +.Li env_check +lists, as modified by global Defaults parameters in +.Em sudoers , +are displayed when +.Nm sudo +is run by root with the +.Fl V +option. +If the +.Em secure_path +option is set, its value will be used for the +.Ev PATH +environment variable. +This flag is +.Em @env_reset@ +by default. +.It fast_glob +Normally, +.Nm sudo +uses the +.Xr glob 3 +function to do shell-style globbing when matching path names. +However, since it accesses the file system, +.Xr glob 3 +can take a long time to complete for some patterns, especially +when the pattern references a network file system that is mounted +on demand (auto mounted). +The +.Em fast_glob +option causes +.Nm sudo +to use the +.Xr fnmatch 3 +function, which does not access the file system to do its matching. +The disadvantage of +.Em fast_glob +is that it is unable to match relative path names such as +.Pa ./ls +or +.Pa ../bin/ls . +This has security implications when path names that include globbing +characters are used with the negation operator, +.Ql !\& , +as such rules can be trivially bypassed. +As such, this option should not be used when the +.Em sudoers +file contains rules that contain negated path names which include globbing +characters. +This flag is +.Em off +by default. +.It fqdn +Set this flag if you want to put fully qualified host names in the +.Em sudoers +file when the local host name (as returned by the +.Li hostname +command) does not contain the domain name. +In other words, instead of myhost you would use myhost.mydomain.edu. +You may still use the short form if you wish (and even mix the two). +This option is only effective when the +.Dq canonical +host name, as returned by the +.Fn getaddrinfo +or +.Fn gethostbyname +function, is a fully-qualified domain name. +This is usually the case when the system is configured to use DNS +for host name resolution. +.Pp +If the system is configured to use the +.Pa /etc/hosts +file in preference to DNS, the +.Dq canonical +host name may not be fully-qualified. +The order that sources are queried for host name resolution +is usually specified in the +.Pa @nsswitch_conf@ , +.Pa @netsvc_conf@ , +.Pa /etc/host.conf , +or, in some cases, +.Pa /etc/resolv.conf +file. +In the +.Pa /etc/hosts +file, the first host name of the entry is considered to be the +.Dq canonical +name; subsequent names are aliases that are not used by +.Nm . +For example, the following hosts file line for the machine +.Dq xyzzy +has the fully-qualified domain name as the +.Dq canonical +host name, and the short version as an alias. +.sp +.Dl 192.168.1.1 xyzzy.sudo.ws xyzzy +.sp +If the machine's hosts file entry is not formatted properly, the +.Em fqdn +option will not be effective if it is queried before DNS. +.Pp +Beware that when using DNS for host name resolution, turning on +.Em fqdn +requires +.Nm +to make DNS lookups which renders +.Nm sudo +unusable if DNS stops working (for example if the machine is disconnected +from the network). +Also note that just like with the hosts file, you must use the +.Dq canonical +name as DNS knows it. +That is, you may not use a host alias +.Po +.Li CNAME +entry +.Pc +due to performance issues and the fact that there is no way to get all +aliases from DNS. +.Pp +This flag is +.Em @fqdn@ +by default. +.It ignore_audit_errors +Allow commands to be run even if +.Nm +cannot write to the audit log. +If enabled, an audit log write failure is not treated as a fatal error. +If disabled, a command may only be run after the audit event is successfully +written. +This flag is only effective on systems for which +.Nm +supports audit logging, including +.Fx , +Linux, macOS and Solaris. +This flag is +.Em on +by default. +.It ignore_dot +If set, +.Nm sudo +will ignore "." or "" (both denoting current directory) in the +.Ev PATH +environment variable; the +.Ev PATH +itself is not modified. +This flag is +.Em @ignore_dot@ +by default. +.It ignore_iolog_errors +Allow commands to be run even if +.Nm +cannot write to the I/O log. +If enabled, an I/O log write failure is not treated as a fatal error. +If disabled, the command will be terminated if the I/O log cannot be written to. +This flag is +.Em off +by default. +.It ignore_logfile_errors +Allow commands to be run even if +.Nm +cannot write to the log file. +If enabled, a log file write failure is not treated as a fatal error. +If disabled, a command may only be run after the log file entry is successfully +written. +This flag only has an effect when +.Nm +is configured to use file-based logging via the +.Em logfile +option. +This flag is +.Em on +by default. +.It ignore_local_sudoers +If set via LDAP, parsing of +.Pa @sysconfdir@/sudoers +will be skipped. +This is intended for Enterprises that wish to prevent the usage of local +sudoers files so that only LDAP is used. +This thwarts the efforts of rogue operators who would attempt to add roles to +.Pa @sysconfdir@/sudoers . +When this option is present, +.Pa @sysconfdir@/sudoers +does not even need to exist. +Since this option tells +.Nm sudo +how to behave when no specific LDAP entries have been matched, this +sudoOption is only meaningful for the +.Li cn=defaults +section. +This flag is +.Em off +by default. +.It ignore_unknown_defaults +If set, +.Nm sudo +will not produce a warning if it encounters an unknown Defaults entry +in the +.Em sudoers +file or an unknown sudoOption in LDAP. +This flag is +.Em off +by default. +.It insults +If set, +.Nm sudo +will insult users when they enter an incorrect password. +This flag is +.Em @insults@ +by default. +.It log_host +If set, the host name will be logged in the (non-syslog) +.Nm sudo +log file. +This flag is +.Em off +by default. +.It log_input +If set, +.Nm sudo +will run the command in a pseudo-tty and log all user input. +If the standard input is not connected to the user's tty, due to +I/O redirection or because the command is part of a pipeline, that +input is also captured and stored in a separate log file. +Anything sent to the standard input will be consumed, regardless of +whether or not the command run via +.Nm sudo +is actually reading the standard input. +This may have unexpected results when using +.Nm sudo +in a shell script that expects to process the standard input. +For more information about I/O logging, see the +.Sx "I/O LOG FILES" +section. +This flag is +.Em off +by default. +.It log_output +If set, +.Nm sudo +will run the command in a pseudo-tty and log all output that is sent +to the screen, similar to the +.Xr script 1 +command. +For more information about I/O logging, see the +.Sx "I/O LOG FILES" +section. +This flag is +.Em off +by default. +.It log_year +If set, the four-digit year will be logged in the (non-syslog) +.Nm sudo +log file. +This flag is +.Em off +by default. +.It long_otp_prompt +When validating with a One Time Password (OTP) scheme such as +.Sy S/Key +or +.Sy OPIE , +a two-line prompt is used to make it easier +to cut and paste the challenge to a local window. +It's not as pretty as the default but some people find it more convenient. +This flag is +.Em @long_otp_prompt@ +by default. +.It mail_all_cmnds +Send mail to the +.Em mailto +user every time a user attempts to run a command via +.Nm sudo +(this includes +.Nm sudoedit ) . +No mail will be sent if the user runs +.Nm sudo +with the +.Fl l +or +.Fl v +option unless there is an authentication error and the +.Em mail_badpass +flag is also set. +This flag is +.Em off +by default. +.It mail_always +Send mail to the +.Em mailto +user every time a user runs +.Nm sudo . +This flag is +.Em off +by default. +.It mail_badpass +Send mail to the +.Em mailto +user if the user running +.Nm sudo +does not enter the correct password. +If the command the user is attempting to run is not permitted by +.Nm sudoers +and one of the +.Em mail_all_cmnds , +.Em mail_always , +.Em mail_no_host , +.Em mail_no_perms +or +.Em mail_no_user +flags are set, this flag will have no effect. +This flag is +.Em off +by default. +.It mail_no_host +If set, mail will be sent to the +.Em mailto +user if the invoking user exists in the +.Em sudoers +file, but is not allowed to run commands on the current host. +This flag is +.Em @mail_no_host@ +by default. +.It mail_no_perms +If set, mail will be sent to the +.Em mailto +user if the invoking user is allowed to use +.Nm sudo +but the command they are trying is not listed in their +.Em sudoers +file entry or is explicitly denied. +This flag is +.Em @mail_no_perms@ +by default. +.It mail_no_user +If set, mail will be sent to the +.Em mailto +user if the invoking user is not in the +.Em sudoers +file. +This flag is +.Em @mail_no_user@ +by default. +.It match_group_by_gid +By default, +.Nm +will look up each group the user is a member of by group ID to +determine the group name (this is only done once). +The resulting list of the user's group names is used when matching +groups listed in the +.Em sudoers +file. +This works well on systems where the number of groups listed in the +.Em sudoers +file is larger than the number of groups a typical user belongs to. +On systems where group lookups are slow, where users may belong +to a large number of groups, and where the number of groups listed +in the +.Em sudoers +file is relatively small, it may be prohibitively expensive and +running commands via +.Nm sudo +may take longer than normal. +On such systems it may be faster to use the +.Em match_group_by_gid +flag to avoid resolving the user's group IDs to group names. +In this case, +.Nm +must look up any group name listed in the +.Em sudoers +file and use the group ID instead of the group name when determining +whether the user is a member of the group. +.Pp +Note that if +.Em match_group_by_gid +is enabled, group database lookups performed by +.Nm +will be keyed by group name as opposed to group ID. +On systems where there are multiple sources for the group database, +it is possible to have conflicting group names or group IDs in the local +.Pa /etc/group +file and the remote group database. +On such systems, enabling or disabling +.Em match_group_by_gid +can be used to choose whether group database queries are performed +by name (enabled) or ID (disabled), which may aid in working around +group entry conflicts. +.Pp +The +.Em match_group_by_gid +flag has no effect when +.Em sudoers +data is stored in LDAP. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.18 or higher. +.It netgroup_tuple +If set, netgroup lookups will be performed using the full netgroup +tuple: host name, user name and domain (if one is set). +Historically, +.Nm sudo +only matched the user name and domain for netgroups used in a +.Li User_List +and only matched the host name and domain for netgroups used in a +.Li Host_List . +This flag is +.Em off +by default. +.It noexec +If set, all commands run via +.Nm sudo +will behave as if the +.Li NOEXEC +tag has been set, unless overridden by an +.Li EXEC +tag. +See the description of +.Em EXEC and NOEXEC +above as well as the +.Sx Preventing shell escapes +section at the end of this manual. +This flag is +.Em off +by default. +.It pam_session +On systems that use PAM for authentication, +.Nm sudo +will create a new PAM session for the command to be run in. +Disabling +.Em pam_session +may be needed on older PAM implementations or on operating systems where +opening a PAM session changes the utmp or wtmp files. +If PAM session support is disabled, resource limits may not be updated +for the command being run. +If +.Em pam_session , +.Em pam_setcred , +and +.Em use_pty +are disabled and I/O logging has not been configured, +.Nm sudo +will execute the command directly instead of running it as a child +process. +This flag is +.Em @pam_session@ +by default. +.Pp +This setting is only supported by version 1.8.7 or higher. +.It pam_setcred +On systems that use PAM for authentication, +.Nm sudo +will attempt to establish credentials for the target user by default, +if supported by the underlying authentication system. +One example of a credential is a Kerberos ticket. +If +.Em pam_session , +.Em pam_setcred , +and +.Em use_pty +are disabled and I/O logging has not been configured, +.Nm sudo +will execute the command directly instead of running it as a child +process. +This flag is +.Em on +by default. +.Pp +This setting is only supported by version 1.8.8 or higher. +.It passprompt_override +If set, the prompt specified by +.Em passprompt +or the +.Ev SUDO_PROMPT +environment variable will always be used and will replace the +prompt provided by a PAM module or other authentication method. +This flag is +.Em off +by default. +.It path_info +Normally, +.Nm sudo +will tell the user when a command could not be +found in their +.Ev PATH +environment variable. +Some sites may wish to disable this as it could be used to gather +information on the location of executables that the normal user does +not have access to. +The disadvantage is that if the executable is simply not in the user's +.Ev PATH , +.Nm sudo +will tell the user that they are not allowed to run it, which can be confusing. +This flag is +.Em @path_info@ +by default. +.It preserve_groups +By default, +.Nm sudo +will initialize the group vector to the list of groups the target user is in. +When +.Em preserve_groups +is set, the user's existing group vector is left unaltered. +The real and effective group IDs, however, are still set to match the +target user. +This flag is +.Em off +by default. +.It pwfeedback +By default, +.Nm sudo +reads the password like most other Unix programs, +by turning off echo until the user hits the return (or enter) key. +Some users become confused by this as it appears to them that +.Nm sudo +has hung at this point. +When +.Em pwfeedback +is set, +.Nm sudo +will provide visual feedback when the user presses a key. +Note that this does have a security impact as an onlooker may be able to +determine the length of the password being entered. +This flag is +.Em off +by default. +.It requiretty +If set, +.Nm sudo +will only run when the user is logged in to a real tty. +When this flag is set, +.Nm sudo +can only be run from a login session and not via other means such as +.Xr cron @mansectsu@ +or cgi-bin scripts. +This flag is +.Em off +by default. +.It root_sudo +If set, root is allowed to run +.Nm sudo +too. +Disabling this prevents users from +.Dq chaining +.Nm sudo +commands to get a root shell by doing something like +.Dq Li sudo sudo /bin/sh . +Note, however, that turning off +.Em root_sudo +will also prevent root from running +.Nm sudoedit . +Disabling +.Em root_sudo +provides no real additional security; it exists purely for historical reasons. +This flag is +.Em @root_sudo@ +by default. +.It rootpw +If set, +.Nm sudo +will prompt for the root password instead of the password of the invoking user +when running a command or editing a file. +This flag is +.Em off +by default. +.It runaspw +If set, +.Nm sudo +will prompt for the password of the user defined by the +.Em runas_default +option (defaults to +.Li @runas_default@ ) +instead of the password of the invoking user +when running a command or editing a file. +This flag is +.Em off +by default. +.It set_home +If enabled and +.Nm sudo +is invoked with the +.Fl s +option the +.Ev HOME +environment variable will be set to the home directory of the target +user (which is root unless the +.Fl u +option is used). +This effectively makes the +.Fl s +option imply +.Fl H . +Note that +.Ev HOME +is already set when the +.Em env_reset +option is enabled, so +.Em set_home +is only effective for configurations where either +.Em env_reset +is disabled +or +.Ev HOME +is present in the +.Em env_keep +list. +This flag is +.Em off +by default. +.It set_logname +Normally, +.Nm sudo +will set the +.Ev LOGNAME +and +.Ev USER +environment variables to the name of the target user (usually root unless the +.Fl u +option is given). +However, since some programs (including the RCS revision control system) use +.Ev LOGNAME +to determine the real identity of the user, it may be desirable to +change this behavior. +This can be done by negating the set_logname option. +Note that +.Em set_logname +will have no effect +if the +.Em env_reset +option has not been disabled and the +.Em env_keep +list contains +.Ev LOGNAME +or +.Ev USER . +This flag is +.Em on +by default. +.It set_utmp +When enabled, +.Nm sudo +will create an entry in the utmp (or utmpx) file when a pseudo-tty +is allocated. +A pseudo-tty is allocated by +.Nm sudo +when the +.Em log_input , +.Em log_output +or +.Em use_pty +flags are enabled. +By default, the new entry will be a copy of the user's existing utmp +entry (if any), with the tty, time, type and pid fields updated. +This flag is +.Em on +by default. +.It setenv +Allow the user to disable the +.Em env_reset +option from the command line via the +.Fl E +option. +Additionally, environment variables set via the command line are +not subject to the restrictions imposed by +.Em env_check , +.Em env_delete , +or +.Em env_keep . +As such, only trusted users should be allowed to set variables in this manner. +This flag is +.Em off +by default. +.It shell_noargs +If set and +.Nm sudo +is invoked with no arguments it acts as if the +.Fl s +option had been given. +That is, it runs a shell as root (the shell is determined by the +.Ev SHELL +environment variable if it is set, falling back on the shell listed +in the invoking user's /etc/passwd entry if not). +This flag is +.Em off +by default. +.It stay_setuid +Normally, when +.Nm sudo +executes a command the real and effective UIDs are set to the target +user (root by default). +This option changes that behavior such that the real UID is left +as the invoking user's UID. +In other words, this makes +.Nm sudo +act as a setuid wrapper. +This can be useful on systems that disable some potentially +dangerous functionality when a program is run setuid. +This option is only effective on systems that support either the +.Xr setreuid 2 +or +.Xr setresuid 2 +system call. +This flag is +.Em off +by default. +.It sudoedit_checkdir +If set, +.Nm sudoedit +will check all directory components of the path to be edited for writability +by the invoking user. +Symbolic links will not be followed in writable directories and +.Nm sudoedit +will refuse to edit a file located in a writable directory. +These restrictions are not enforced when +.Nm sudoedit +is run by root. +On some systems, if all directory components of the path to be edited +are not readable by the target user, +.Nm sudoedit +will be unable to edit the file. +This flag is +.Em on +by default. +.Pp +This setting was first introduced in version 1.8.15 but initially +suffered from a race condition. +The check for symbolic links in writable intermediate directories +was added in version 1.8.16. +.It sudoedit_follow +By default, +.Nm sudoedit +will not follow symbolic links when opening files. +The +.Em sudoedit_follow +option can be enabled to allow +.Nm sudoedit +to open symbolic links. +It may be overridden on a per-command basis by the +.Em FOLLOW +and +.Em NOFOLLOW +tags. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.15 or higher. +.It syslog_pid +When logging via +.Xr syslog 3 , +include the process ID in the log entry. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.21 or higher. +.It targetpw +If set, +.Nm sudo +will prompt for the password of the user specified +by the +.Fl u +option (defaults to +.Li root ) +instead of the password of the invoking user +when running a command or editing a file. +Note that this flag precludes the use of a uid not listed in the passwd +database as an argument to the +.Fl u +option. +This flag is +.Em off +by default. +.It tty_tickets +If set, users must authenticate on a per-tty basis. +With this flag enabled, +.Nm sudo +will use a separate record in the time stamp file for each terminal. +If disabled, a single record is used for all login sessions. +.Pp +This option has been superseded by the +.Em timestamp_type +option. +.It umask_override +If set, +.Nm sudo +will set the umask as specified in the +.Em sudoers +file without modification. +This makes it possible to specify a umask in the +.Em sudoers +file that is more permissive than the user's own umask and matches +historical behavior. +If +.Em umask_override +is not set, +.Nm sudo +will set the umask to be the union of the user's umask and what is specified in +.Em sudoers . +This flag is +.Em @umask_override@ +by default. +.if \n(LC \{\ +.It use_loginclass +If set, +.Nm sudo +will apply the defaults specified for the target user's login class +if one exists. +Only available if +.Nm sudo +is configured with the +.Li --with-logincap +option. +This flag is +.Em off +by default. +.\} +.It use_netgroups +If set, netgroups (prefixed with +.Ql + ) , +may be used in place of a user or host. +For LDAP-based sudoers, netgroup support requires an expensive +sub-string match on the server unless the +.Sy NETGROUP_BASE +directive is present in the +.Pa @ldap_conf@ +file. +If netgroups are not needed, this option can be disabled to reduce the +load on the LDAP server. +This flag is +.Em on +by default. +.It use_pty +If set, and +.Nm sudo +is running in a terminal, the command will be run in a pseudo-pty +(even if no I/O logging is being done). +If the +.Nm sudo +process is not attached to a terminal, +.Em use_pty +has no effect. +.Pp +A malicious program run under +.Nm sudo +may be capable of injecting commands into the user's +terminal or running a background process that retains access to the +user's terminal device even after the main program has finished +executing. +By running the command in a separate pseudo-pty, this attack is +no longer possible. +This flag is +.Em off +by default. +.It user_command_timeouts +If set, the user may specify a timeout on the command line. +If the timeout expires before the command has exited, the +command will be terminated. +If a timeout is specified both in the +.Pa sudoers +file and on the command line, the smaller of the two timeouts will be used. +See the +.Li Timeout_Spec +section for a description of the timeout syntax. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.20 or higher. +.It utmp_runas +If set, +.Nm sudo +will store the name of the runas user when updating the utmp (or utmpx) file. +By default, +.Nm sudo +stores the name of the invoking user. +This flag is +.Em off +by default. +.It visiblepw +By default, +.Nm sudo +will refuse to run if the user must enter a password but it is not +possible to disable echo on the terminal. +If the +.Em visiblepw +flag is set, +.Nm sudo +will prompt for a password even when it would be visible on the screen. +This makes it possible to run things like +.Dq Li ssh somehost sudo ls +since by default, +.Xr ssh 1 +does +not allocate a tty when running a command. +This flag is +.Em off +by default. +.El +.Pp +.Sy Integers : +.Bl -tag -width 16n +.It closefrom +Before it executes a command, +.Nm sudo +will close all open file descriptors other than standard input, +standard output and standard error (ie: file descriptors 0-2). +The +.Em closefrom +option can be used to specify a different file descriptor at which +to start closing. +The default is +.Li 3 . +.It command_timeout +The maximum amount of time a command is allowed to run before +it is terminated. +See the +.Li Timeout_Spec +section for a description of the timeout syntax. +.Pp +This setting is only supported by version 1.8.20 or higher. +.It maxseq +The maximum sequence number that will be substituted for the +.Dq Li %{seq} +escape in the I/O log file (see the +.Em iolog_dir +description below for more information). +While the value substituted for +.Dq Li %{seq} +is in base 36, +.Em maxseq +itself should be expressed in decimal. +Values larger than 2176782336 (which corresponds to the +base 36 sequence number +.Dq ZZZZZZ ) +will be silently truncated to 2176782336. +The default value is 2176782336. +.Pp +Once the local sequence number reaches the value of +.Em maxseq , +it will +.Dq roll over +to zero, after which +.Nm +will truncate and re-use any existing I/O log path names. +.Pp +This setting is only supported by version 1.8.7 or higher. +.It passwd_tries +The number of tries a user gets to enter his/her password before +.Nm sudo +logs the failure and exits. +The default is +.Li @passwd_tries@ . +.It syslog_maxlen +On many systems, +.Xr syslog 3 +has a relatively small log buffer. +IETF RFC 5424 states that syslog servers must support messages of +at least 480 bytes and should support messages up to 2048 bytes. +By default, +.Nm +creates log messages up to 980 bytes which corresponds to the +historic +.Bx +syslog implementation which used a 1024 byte buffer +to store the message, date, hostname and program name. +To prevent syslog messages from being truncated, +.Nm +will split up log messages that are larger than +.Em syslog_maxlen +bytes. +When a message is split, additional parts will include the string +.Dq Pq command continued +after the user name and before the continued command line arguments. +.Pp +This setting is only supported by version 1.8.19 or higher. +.El +.Pp +.Sy Integers that can be used in a boolean context : +.Bl -tag -width 16n +.It loglinelen +Number of characters per line for the file log. +This value is used to decide when to wrap lines for nicer log files. +This has no effect on the syslog log file, only the file log. +The default is +.Li @loglen@ +(use 0 or negate the option to disable word wrap). +.It passwd_timeout +Number of minutes before the +.Nm sudo +password prompt times out, or +.Li 0 +for no timeout. +The timeout may include a fractional component +if minute granularity is insufficient, for example +.Li 2.5 . +The +default is +.Li @password_timeout@ . +.It timestamp_timeout +Number of minutes that can elapse before +.Nm sudo +will ask for a passwd again. +The timeout may include a fractional component if +minute granularity is insufficient, for example +.Li 2.5 . +The default is +.Li @timeout@ . +Set this to +.Li 0 +to always prompt for a password. +If set to a value less than +.Li 0 +the user's time stamp will not expire until the system is rebooted. +This can be used to allow users to create or delete their own time stamps via +.Dq Li sudo -v +and +.Dq Li sudo -k +respectively. +.It umask +Umask to use when running the command. +Negate this option or set it to 0777 to preserve the user's umask. +The actual umask that is used will be the union of the user's umask +and the value of the +.Em umask +option, which defaults to +.Li @sudo_umask@ . +This guarantees +that +.Nm sudo +never lowers the umask when running a command. +Note: on systems that use PAM, the default PAM configuration may specify +its own umask which will override the value set in +.Em sudoers . +.El +.Pp +.Sy Strings : +.Bl -tag -width 16n +.It authfail_message +Message that is displayed after a user fails to authenticate. +The message may include the +.Ql %d +escape which will expand to the number of failed password attempts. +If set, it overrides the default message, +.Li %d incorrect password attempt(s) . +.It badpass_message +Message that is displayed if a user enters an incorrect password. +The default is +.Li @badpass_message@ +unless insults are enabled. +.It editor +A colon +.Pq Ql :\& +separated list of editors path names used by +.Nm sudoedit +and +.Nm visudo . +For +.Nm sudoedit , +this list is used to find an editor when none of the +.Ev SUDO_EDITOR , +.Ev VISUAL +or +.Ev EDITOR +environment variables are set to an editor that exists and is executable. +For +.Nm visudo , +it is used as a white list of allowed editors; +.Nm visudo +will choose the editor that matches the user's +.Ev SUDO_EDITOR , +.Ev VISUAL +or +.Ev EDITOR +environment variable if possible, or the first editor in the +list that exists and is executable if not. +Unless invoked as +.Nm sudoedit , +.Nm sudo +does not preserve the +.Ev SUDO_EDITOR , +.Ev VISUAL +and +.Ev EDITOR +environment variables by default, even when the +.Em env_reset +option is enabled. +The default is +.Pa @editor@ . +.It iolog_dir +The top-level directory to use when constructing the path name for +the input/output log directory. +Only used if the +.Em log_input +or +.Em log_output +options are enabled or when the +.Li LOG_INPUT +or +.Li LOG_OUTPUT +tags are present for a command. +The session sequence number, if any, is stored in the directory. +The default is +.Pa @iolog_dir@ . +.Pp +The following percent +.Pq Ql % +escape sequences are supported: +.Bl -tag -width 4n +.It Li %{seq} +expanded to a monotonically increasing base-36 sequence number, such as 0100A5, +where every two digits are used to form a new directory, e.g., +.Pa 01/00/A5 +.It Li %{user} +expanded to the invoking user's login name +.It Li %{group} +expanded to the name of the invoking user's real group ID +.It Li %{runas_user} +expanded to the login name of the user the command will +be run as (e.g., root) +.It Li %{runas_group} +expanded to the group name of the user the command will +be run as (e.g., wheel) +.It Li %{hostname} +expanded to the local host name without the domain name +.It Li %{command} +expanded to the base name of the command being run +.El +.Pp +In addition, any escape sequences supported by the system's +.Xr strftime 3 +function will be expanded. +.Pp +To include a literal +.Ql % +character, the string +.Ql %% +should be used. +.It iolog_file +The path name, relative to +.Em iolog_dir , +in which to store input/output logs when the +.Em log_input +or +.Em log_output +options are enabled or when the +.Li LOG_INPUT +or +.Li LOG_OUTPUT +tags are present for a command. +Note that +.Em iolog_file +may contain directory components. +The default is +.Dq Li %{seq} . +.Pp +See the +.Em iolog_dir +option above for a list of supported percent +.Pq Ql % +escape sequences. +.Pp +In addition to the escape sequences, path names that end in six or +more +.Li X Ns s +will have the +.Li X Ns s +replaced with a unique combination of digits and letters, similar to the +.Xr mktemp 3 +function. +.Pp +If the path created by concatenating +.Em iolog_dir +and +.Em iolog_file +already exists, the existing I/O log file will be truncated and +overwritten unless +.Em iolog_file +ends in six or +more +.Li X Ns s . +.It iolog_flush +If set, +.Nm sudo +will flush I/O log data to disk after each write instead of buffering it. +This makes it possible to view the logs in real-time as the program +is executing but may significantly reduce the effectiveness of I/O +log compression. +This flag is +.Em off +by default. +.Pp +This setting is only supported by version 1.8.20 or higher. +.It iolog_group +The group name to look up when setting the group ID on new I/O log +files and directories. +If +.Em iolog_group +is not set, +the primary group ID of the user specified by +.Em iolog_user +is used. +If neither +.Em iolog_group +nor +.Em iolog_user +are set, I/O log files and directories are created with group ID 0. +.Pp +This setting is only supported by version 1.8.19 or higher. +.It iolog_mode +The file mode to use when creating I/O log files. +Mode bits for read and write permissions for owner, group or other +are honored, everything else is ignored. +The file permissions will always include the owner read and +write bits, even if they are not present in the specified mode. +When creating I/O log directories, search (execute) bits are added +to match the read and write bits specified by +.Em iolog_mode . +Defaults to 0600 (read and write by user only). +.Pp +This setting is only supported by version 1.8.19 or higher. +.It iolog_user +The user name to look up when setting the user and group IDs on new +I/O log files and directories. +If +.Em iolog_group +is set, it will be used instead of the user's primary group ID. +By default, I/O log files and directories are created with user and +group ID 0. +.Pp +This setting can be useful when the I/O logs are stored on a Network +File System (NFS) share. +Having a dedicated user own the I/O log files means that +.Nm +does not write to the log files as user ID 0, which is usually +not permitted by NFS. +.Pp +This setting is only supported by version 1.8.19 or higher. +.It lecture_status_dir +The directory in which +.Nm sudo +stores per-user lecture status files. +Once a user has received the lecture, a zero-length file is +created in this directory so that +.Nm sudo +will not lecture the user again. +This directory should +.Em not +be cleared when the system reboots. +The default is +.Pa @vardir@/lectured . +.if \n(PS \{\ +.It limitprivs +The default Solaris limit privileges to use when constructing a new +privilege set for a command. +This bounds all privileges of the executing process. +The default limit privileges may be overridden on a per-command basis in +.Em sudoers . +This option is only available if +.Nm +is built on Solaris 10 or higher. +.\} +.It mailsub +Subject of the mail sent to the +.Em mailto +user. +The escape +.Li %h +will expand to the host name of the machine. +Default is +.Dq Li @mailsub@ . +.It noexec_file +As of +.Nm sudo +version 1.8.1 this option is no longer supported. +The path to the noexec file should now be set in the +.Xr sudo.conf @mansectform@ +file. +.It pam_login_service +On systems that use PAM for authentication, this is the service +name used when the +.Fl i +option is specified. +The default value is +.Dq Li @pam_login_service@ . +See the description of +.Em pam_service +for more information. +.Pp +This setting is only supported by version 1.8.8 or higher. +.It pam_service +On systems that use PAM for authentication, the service name +specifies the PAM policy to apply. +This usually corresponds to an entry in the +.Pa pam.conf +file or a file in the +.Pa /etc/pam.d +directory. +The default value is +.Dq Li sudo . +.Pp +This setting is only supported by version 1.8.8 or higher. +.It passprompt +The default prompt to use when asking for a password; can be overridden via the +.Fl p +option or the +.Ev SUDO_PROMPT +environment variable. +The following percent +.Pq Ql % +escape sequences are supported: +.Bl -tag -width 4n +.It Li %H +expanded to the local host name including the domain name +(only if the machine's host name is fully qualified or the +.Em fqdn +option is set) +.It Li %h +expanded to the local host name without the domain name +.It Li %p +expanded to the user whose password is being asked for (respects the +.Em rootpw , +.Em targetpw +and +.Em runaspw +flags in +.Em sudoers ) +.It Li \&%U +expanded to the login name of the user the command will +be run as (defaults to root) +.It Li %u +expanded to the invoking user's login name +.It Li %% +two consecutive +.Li % +characters are collapsed into a single +.Li % +character +.El +.Pp +On systems that use PAM for authentication, +.Em passprompt +will only be used if the prompt provided by the PAM module matches the string +.Dq "Password: " +or +.Dq "username's Password: " . +This ensures that the +.Em passprompt +setting does not interfere with challenge-response style authentication. +The +.Em passprompt_override +flag can be used to change this behavior. +.Pp +The default value is +.Dq Li "@passprompt@" . +.if \n(PS \{\ +.It privs +The default Solaris privileges to use when constructing a new +privilege set for a command. +This is passed to the executing process via the inherited privilege set, +but is bounded by the limit privileges. +If the +.Em privs +option is specified but the +.Em limitprivs +option is not, the limit privileges of the executing process is set to +.Em privs . +The default privileges may be overridden on a per-command basis in +.Em sudoers . +This option is only available if +.Nm +is built on Solaris 10 or higher. +.\} +.if \n(SL \{\ +.It role +The default SELinux role to use when constructing a new security +context to run the command. +The default role may be overridden on a per-command basis in the +.Em sudoers +file or via command line options. +This option is only available when +.Nm sudo +is built with SELinux support. +.\} +.It runas_default +The default user to run commands as if the +.Fl u +option is not specified on the command line. +This defaults to +.Li @runas_default@ . +.It sudoers_locale +Locale to use when parsing the sudoers file, logging commands, and +sending email. +Note that changing the locale may affect how sudoers is interpreted. +Defaults to +.Dq Li C . +.It timestamp_type +.Nm sudoers +uses per-user time stamp files for credential caching. +The +.Em timestamp_type +option can be used to specify the type of time stamp record used. +It has the following possible values: +.Bl -tag -width 6n +.It global +A single time stamp record is used for all of a user's login sessions, +regardless of the terminal or parent process ID. +An additional record is used to serialize password prompts when +.Nm sudo +is used multiple times in a pipeline, but this does not affect authentication. +.It ppid +A single time stamp record is used for all processes with the same parent +process ID (usually the shell). +Commands run from the same shell (or other common parent process) +will not require a password for +.Em timestamp_timeout +minutes +.Po +.Li @timeout@ +by default +.Pc . +Commands run via +.Nm sudo +with a different parent process ID, for example from a shell script, +will be authenticated separately. +.It tty +One time stamp record is used for each terminal, +which means that a user's login sessions are authenticated separately. +If no terminal is present, the behavior is the same as +.Em ppid . +Commands run from the same terminal will not require a password for +.Em timestamp_timeout +minutes +.Po +.Li @timeout@ +by default +.Pc . +.It kernel +The time stamp is stored in the kernel as an attribute of the terminal +device. +If no terminal is present, the behavior is the same as +.Em ppid . +Negative +.Em timestamp_timeout +values are not supported and positive values are limited to a maximum +of 60 minutes. +This is currently only supported on +.Ox . +.El +.Pp +The default value is +.Em @timestamp_type@ . +.Pp +This setting is only supported by version 1.8.21 or higher. +.It timestampdir +The directory in which +.Nm sudo +stores its time stamp files. +This directory should be cleared when the system reboots. +The default is +.Pa @rundir@/ts . +.It timestampowner +The owner of the lecture status directory, time stamp directory and all +files stored therein. +The default is +.Li root . +.if \n(SL \{\ +.It type +The default SELinux type to use when constructing a new security +context to run the command. +The default type may be overridden on a per-command basis in the +.Em sudoers +file or via command line options. +This option is only available when +.Nm sudo +is built with SELinux support. +.\} +.El +.Pp +.Sy Strings that can be used in a boolean context : +.Bl -tag -width 12n +.It env_file +The +.Em env_file +option specifies the fully qualified path to a file containing variables +to be set in the environment of the program being run. +Entries in this file should either be of the form +.Dq Li VARIABLE=value +or +.Dq Li export VARIABLE=value . +The value may optionally be surrounded by single or double quotes. +Variables in this file are only added if the variable does not already +exist in the environment. +This file is considered to be part of the security policy, +its contents are not subject to other +.Nm sudo +environment restrictions such as +.Em env_keep +and +.Em env_check . +.It exempt_group +Users in this group are exempt from password and PATH requirements. +The group name specified should not include a +.Li % +prefix. +This is not set by default. +.It fdexec +Determines whether +.Nm sudo +will execute a command by its path or by an open file descriptor. +It has the following possible values: +.Bl -tag -width 6n +.It always +Always execute by file descriptor. +.It never +Never execute by file descriptor. +.It digest_only +Only execute by file descriptor if the command has an associated digest +in the +.Em sudoers +file. +.El +.Pp +The default value is +.Em digest_only . +This avoids a time of check versus time of use race condition when +the command is located in a directory writable by the invoking user. +.Pp +Note that +.Em fdexec +will change the first element of the argument vector for scripts +($0 in the shell) due to the way the kernel runs script interpreters. +Instead of being a normal path, it will refer to a file descriptor. +For example, +.Pa /dev/fd/4 +on Solaris and +.Pa /proc/self/fd/4 +on Linux. +A workaround is to use the +.Dv SUDO_COMMAND +environment variable instead. +.Pp +The +.Em fdexec +setting is only used when the command is matched by path name. +It has no effect if the command is matched by the built-in +.Sy ALL +alias. +.Pp +This setting is only supported by version 1.8.20 or higher. +If the operating system does not support the +.Xr fexecve 2 +system call, this setting has no effect. +.It group_plugin +A string containing a +.Nm sudoers +group plugin with optional arguments. +The string should consist of the plugin +path, either fully-qualified or relative to the +.Pa @PLUGINDIR@ +directory, followed by any configuration arguments the plugin requires. +These arguments (if any) will be passed to the plugin's initialization function. +If arguments are present, the string must be enclosed in double quotes +.Pq \&"" . +.Pp +For more information see +.Sx "GROUP PROVIDER PLUGINS" . +.It lecture +This option controls when a short lecture will be printed along with +the password prompt. +It has the following possible values: +.Bl -tag -width 6n +.It always +Always lecture the user. +.It never +Never lecture the user. +.It once +Only lecture the user the first time they run +.Nm sudo . +.El +.Pp +If no value is specified, a value of +.Em once +is implied. +Negating the option results in a value of +.Em never +being used. +The default value is +.Em @lecture@ . +.It lecture_file +Path to a file containing an alternate +.Nm sudo +lecture that will be used in place of the standard lecture if the named +file exists. +By default, +.Nm sudo +uses a built-in lecture. +.It listpw +This option controls when a password will be required when a user runs +.Nm sudo +with the +.Fl l +option. +It has the following possible values: +.Bl -tag -width 8n +.It all +All the user's +.Em sudoers +file entries for the current host must have +the +.Li NOPASSWD +flag set to avoid entering a password. +.It always +The user must always enter a password to use the +.Fl l +option. +.It any +At least one of the user's +.Em sudoers +file entries for the current host +must have the +.Li NOPASSWD +flag set to avoid entering a password. +.It never +The user need never enter a password to use the +.Fl l +option. +.El +.Pp +If no value is specified, a value of +.Em any +is implied. +Negating the option results in a value of +.Em never +being used. +The default value is +.Em any . +.It logfile +Path to the +.Nm sudo +log file (not the syslog log file). +Setting a path turns on logging to a file; +negating this option turns it off. +By default, +.Nm sudo +logs via syslog. +.It mailerflags +Flags to use when invoking mailer. +Defaults to +.Fl t . +.It mailerpath +Path to mail program used to send warning mail. +Defaults to the path to sendmail found at configure time. +.It mailfrom +Address to use for the +.Dq from +address when sending warning and error mail. +The address should be enclosed in double quotes +.Pq \&"" +to protect against +.Nm sudo +interpreting the +.Li @ +sign. +Defaults to the name of the user running +.Nm sudo . +.It mailto +Address to send warning and error mail to. +The address should be enclosed in double quotes +.Pq \&"" +to protect against +.Nm sudo +interpreting the +.Li @ +sign. +Defaults to +.Li @mailto@ . +.It restricted_env_file +The +.Em restricted_env_file +option specifies the fully qualified path to a file containing variables +to be set in the environment of the program being run. +Entries in this file should either be of the form +.Dq Li VARIABLE=value +or +.Dq Li export VARIABLE=value . +The value may optionally be surrounded by single or double quotes. +Variables in this file are only added if the variable does not already +exist in the environment. +Unlike +.Em env_file , +the file's contents are not trusted and are processed in a manner +similar to that of the invoking user's environment. +If +.Em env_reset +is enabled, variables in the file will only be added if they are +matched by either the +.Em env_check +or +.Em env_keep +list. +If +.Em env_reset +is disabled, variables in the file are added as long as they +are not matched by the +.Em env_delete +list. +In either case, the contents of +.Em restricted_env_file +are processed before the contents of +.Em env_file . +.It secure_path +Path used for every command run from +.Nm sudo . +If you don't trust the +people running +.Nm sudo +to have a sane +.Ev PATH +environment variable you may want to use this. +Another use is if you want to have the +.Dq root path +be separate from the +.Dq user path . +Users in the group specified by the +.Em exempt_group +option are not affected by +.Em secure_path . +This option is @secure_path@ by default. +.It syslog +Syslog facility if syslog is being used for logging (negate to +disable syslog logging). +Defaults to +.Li @logfac@ . +.Pp +The following syslog facilities are supported: +.Sy authpriv +(if your +OS supports it), +.Sy auth , +.Sy daemon , +.Sy user , +.Sy local0 , +.Sy local1 , +.Sy local2 , +.Sy local3 , +.Sy local4 , +.Sy local5 , +.Sy local6 , +and +.Sy local7 . +.It syslog_badpri +Syslog priority to use when the user is not allowed to run a command or +when authentication is unsuccessful. +Defaults to +.Li @badpri@ . +.Pp +The following syslog priorities are supported: +.Sy alert , +.Sy crit , +.Sy debug , +.Sy emerg , +.Sy err , +.Sy info , +.Sy notice , +.Sy warning , +and +.Sy none . +Negating the option or setting it to a value of +.Sy none +will disable logging of unsuccessful commands. +.It syslog_goodpri +Syslog priority to use when the user is allowed to run a command and +authentication is successful. +Defaults to +.Li @goodpri@ . +.Pp +See +.Em syslog_badpri +for the list of supported syslog priorities. +Negating the option or setting it to a value of +.Sy none +will disable logging of successful commands. +.It verifypw +This option controls when a password will be required when a user runs +.Nm sudo +with the +.Fl v +option. +It has the following possible values: +.Bl -tag -width 6n +.It all +All the user's +.Em sudoers +file entries for the current host must have the +.Li NOPASSWD +flag set to avoid entering a password. +.It always +The user must always enter a password to use the +.Fl v +option. +.It any +At least one of the user's +.Em sudoers +file entries for the current host must have the +.Li NOPASSWD +flag set to avoid entering a password. +.It never +The user need never enter a password to use the +.Fl v +option. +.El +.Pp +If no value is specified, a value of +.Em all +is implied. +Negating the option results in a value of +.Em never +being used. +The default value is +.Em all . +.El +.Pp +.Sy Lists that can be used in a boolean context : +.Bl -tag -width 16n +.It env_check +Environment variables to be removed from the user's environment +unless they are considered +.Dq safe . +For all variables except +.Li TZ , +.Dq safe +means that the variable's value does not contain any +.Ql % +or +.Ql / +characters. +This can be used to guard against printf-style format vulnerabilities +in poorly-written programs. +The +.Li TZ +variable is considered unsafe if any of the following are true: +.Bl -bullet -width 1n +.It +It consists of a fully-qualified path name, +optionally prefixed with a colon +.Pq Ql :\& , +that does not match the location of the +.Pa zoneinfo +directory. +.It +It contains a +.Pa .. +path element. +.It +It contains white space or non-printable characters. +.It +It is longer than the value of +.Li PATH_MAX . +.El +.Pp +The argument may be a double-quoted, space-separated list or a +single value without double-quotes. +The list can be replaced, added to, deleted from, or disabled by using +the +.Li = , +.Li += , +.Li -= , +and +.Li \&! +operators respectively. +Regardless of whether the +.Li env_reset +option is enabled or disabled, variables specified by +.Li env_check +will be preserved in the environment if they pass the aforementioned check. +The global list of environment variables to check is displayed when +.Nm sudo +is run by root with +the +.Fl V +option. +.It env_delete +Environment variables to be removed from the user's environment when the +.Em env_reset +option is not in effect. +The argument may be a double-quoted, space-separated list or a +single value without double-quotes. +The list can be replaced, added to, deleted from, or disabled by using the +.Li = , +.Li += , +.Li -= , +and +.Li \&! +operators respectively. +The global list of environment variables to remove is displayed when +.Nm sudo +is run by root with the +.Fl V +option. +Note that many operating systems will remove potentially dangerous +variables from the environment of any setuid process (such as +.Nm sudo ) . +.It env_keep +Environment variables to be preserved in the user's environment when the +.Em env_reset +option is in effect. +This allows fine-grained control over the environment +.Nm sudo Ns -spawned +processes will receive. +The argument may be a double-quoted, space-separated list or a +single value without double-quotes. +The list can be replaced, added to, deleted from, or disabled by using the +.Li = , +.Li += , +.Li -= , +and +.Li \&! +operators respectively. +The global list of variables to keep +is displayed when +.Nm sudo +is run by root with the +.Fl V +option. +.El +.Sh GROUP PROVIDER PLUGINS +The +.Nm +plugin supports its own plugin interface to allow non-Unix +group lookups which can query a group source other +than the standard Unix group database. +This can be used to implement support for the +.Li nonunix_group +syntax described earlier. +.Pp +Group provider plugins are specified via the +.Em group_plugin +Defaults setting. +The argument to +.Em group_plugin +should consist of the plugin path, either fully-qualified or relative to the +.Pa @PLUGINDIR@ +directory, followed by any configuration options the plugin requires. +These options (if specified) will be passed to the plugin's initialization +function. +If options are present, the string must be enclosed in double quotes +.Pq \&"" . +.Pp +The following group provider plugins are installed by default: +.Bl -tag -width 8n +.It group_file +The +.Em group_file +plugin supports an alternate group file that uses the same syntax as the +.Pa /etc/group +file. +The path to the group file should be specified as an option +to the plugin. +For example, if the group file to be used is +.Pa /etc/sudo-group : +.Bd -literal +Defaults group_plugin="group_file.so /etc/sudo-group" +.Ed +.It system_group +The +.Em system_group +plugin supports group lookups via the standard C library functions +.Fn getgrnam +and +.Fn getgrid . +This plugin can be used in instances where the user belongs to +groups not present in the user's supplemental group vector. +This plugin takes no options: +.Bd -literal +Defaults group_plugin=system_group.so +.Ed +.El +.Pp +The group provider plugin API is described in detail in +.Xr sudo_plugin @mansectform@ . +.Sh LOG FORMAT +.Nm +can log events using either +.Xr syslog 3 +or a simple log file. +The log format is almost identical in both cases. +.Ss Accepted command log entries +Commands that sudo runs are logged using the following format (split +into multiple lines for readability): +.Bd -literal -offset 4n +date hostname progname: username : TTY=ttyname ; PWD=cwd ; \e + USER=runasuser ; GROUP=runasgroup ; TSID=logid ; \e + ENV=env_vars COMMAND=command +.Ed +.Pp +Where the fields are as follows: +.Bl -tag -width 12n +.It date +The date the command was run. +Typically, this is in the format +.Dq MMM, DD, HH:MM:SS . +If logging via +.Xr syslog 3 , +the actual date format is controlled by the syslog daemon. +If logging to a file and the +.Em log_year +option is enabled, +the date will also include the year. +.It hostname +The name of the host +.Nm sudo +was run on. +This field is only present when logging via +.Xr syslog 3 . +.It progname +The name of the program, usually +.Em sudo +or +.Em sudoedit . +This field is only present when logging via +.Xr syslog 3 . +.It username +The login name of the user who ran +.Nm sudo . +.It ttyname +The short name of the terminal (e.g., +.Dq console , +.Dq tty01 , +or +.Dq pts/0 ) +.Nm sudo +was run on, or +.Dq unknown +if there was no terminal present. +.It cwd +The current working directory that +.Nm sudo +was run in. +.It runasuser +The user the command was run as. +.It runasgroup +The group the command was run as if one was specified on the command line. +.It logid +An I/O log identifier that can be used to replay the command's output. +This is only present when the +.Em log_input +or +.Em log_output +option is enabled. +.It env_vars +A list of environment variables specified on the command line, +if specified. +.It command +The actual command that was executed. +.El +.Pp +Messages are logged using the locale specified by +.Em sudoers_locale , +which defaults to the +.Dq Li C +locale. +.Ss Denied command log entries +If the user is not allowed to run the command, the reason for the denial +will follow the user name. +Possible reasons include: +.Bl -tag -width 4 +.It user NOT in sudoers +The user is not listed in the +.Em sudoers +file. +.It user NOT authorized on host +The user is listed in the +.Em sudoers +file but is not allowed to run commands on the host. +.It command not allowed +The user is listed in the +.Em sudoers +file for the host but they are not allowed to run the specified command. +.It 3 incorrect password attempts +The user failed to enter their password after 3 tries. +The actual number of tries will vary based on the number of +failed attempts and the value of the +.Em passwd_tries +option. +.It a password is required +.Nm sudo Ns 's +.Fl n +option was specified but a password was required. +.It sorry, you are not allowed to set the following environment variables +The user specified environment variables on the command line that +were not allowed by +.Em sudoers . +.El +.Ss Error log entries +If an error occurs, +.Nm +will log a message and, in most cases, send a message to the +administrator via email. +Possible errors include: +.Bl -tag -width 4 +.It parse error in @sysconfdir@/sudoers near line N +.Nm +encountered an error when parsing the specified file. +In some cases, the actual error may be one line above or below the +line number listed, depending on the type of error. +.It problem with defaults entries +The +.Em sudoers +file contains one or more unknown Defaults settings. +This does not prevent +.Nm sudo +from running, but the +.Em sudoers +file should be checked using +.Nm visudo . +.It timestamp owner (username): \&No such user +The time stamp directory owner, as specified by the +.Em timestampowner +setting, could not be found in the password database. +.It unable to open/read @sysconfdir@/sudoers +The +.Em sudoers +file could not be opened for reading. +This can happen when the +.Em sudoers +file is located on a remote file system that maps user ID 0 to +a different value. +Normally, +.Nm +tries to open the +.Em sudoers +file using group permissions to avoid this problem. +Consider either changing the ownership of +.Pa @sysconfdir@/sudoers +or adding an argument like +.Dq sudoers_uid=N +(where +.Sq N +is the user ID that owns the +.Em sudoers +file) to the end of the +.Nm +.Li Plugin +line in the +.Xr sudo.conf @mansectform@ +file. +.It unable to stat @sysconfdir@/sudoers +The +.Pa @sysconfdir@/sudoers +file is missing. +.It @sysconfdir@/sudoers is not a regular file +The +.Pa @sysconfdir@/sudoers +file exists but is not a regular file or symbolic link. +.It @sysconfdir@/sudoers is owned by uid N, should be 0 +The +.Em sudoers +file has the wrong owner. +If you wish to change the +.Em sudoers +file owner, please add +.Dq sudoers_uid=N +(where +.Sq N +is the user ID that owns the +.Em sudoers +file) to the +.Nm +.Li Plugin +line in the +.Xr sudo.conf @mansectform@ +file. +.It @sysconfdir@/sudoers is world writable +The permissions on the +.Em sudoers +file allow all users to write to it. +The +.Em sudoers +file must not be world-writable, the default file mode +is 0440 (readable by owner and group, writable by none). +The default mode may be changed via the +.Dq sudoers_mode +option to the +.Nm +.Li Plugin +line in the +.Xr sudo.conf @mansectform@ +file. +.It @sysconfdir@/sudoers is owned by gid N, should be 1 +The +.Em sudoers +file has the wrong group ownership. +If you wish to change the +.Em sudoers +file group ownership, please add +.Dq sudoers_gid=N +(where +.Sq N +is the group ID that owns the +.Em sudoers +file) to the +.Nm +.Li Plugin +line in the +.Xr sudo.conf @mansectform@ +file. +.It unable to open @rundir@/ts/username +.Nm sudoers +was unable to read or create the user's time stamp file. +This can happen when +.Em timestampowner +is set to a user other than root and the mode on +.Pa @rundir@ +is not searchable by group or other. +The default mode for +.Pa @rundir@ +is 0711. +.It unable to write to @rundir@/ts/username +.Nm sudoers +was unable to write to the user's time stamp file. +.It @rundir@/ts is owned by uid X, should be Y +The time stamp directory is owned by a user other than +.Em timestampowner . +This can occur when the value of +.Em timestampowner +has been changed. +.Nm sudoers +will ignore the time stamp directory until the owner is corrected. +.It @rundir@/ts is group writable +The time stamp directory is group-writable; it should be writable only by +.Em timestampowner . +The default mode for the time stamp directory is 0700. +.Nm sudoers +will ignore the time stamp directory until the mode is corrected. +.El +.Ss Notes on logging via syslog +By default, +.Nm sudoers +logs messages via +.Xr syslog 3 . +The +.Em date , +.Em hostname , +and +.Em progname +fields are added by the system's +.Fn syslog +function, not +.Nm +itself. +As such, they may vary in format on different systems. +.Pp +The maximum size of syslog messages varies from system to system. +The +.Em syslog_maxlen +setting can be used to change the maximum syslog message size +from the default value of 980 bytes. +For more information, see the description of +.Em syslog_maxlen . +.Ss Notes on logging to a file +If the +.Em logfile +option is set, +.Nm sudoers +will log to a local file, such as +.Pa /var/log/sudo . +When logging to a file, +.Nm sudoers +uses a format similar to +.Xr syslog 3 , +with a few important differences: +.Bl -enum +.It +The +.Em progname +and +.Em hostname +fields are not present. +.It +If the +.Em log_year +option is enabled, +the date will also include the year. +.It +Lines that are longer than +.Em loglinelen +characters (80 by default) are word-wrapped and continued on the +next line with a four character indent. +This makes entries easier to read for a human being, but makes it +more difficult to use +.Xr grep 1 +on the log files. +If the +.Em loglinelen +option is set to 0 (or negated with a +.Ql \&! ) , +word wrap will be disabled. +.El +.Sh I/O LOG FILES +When I/O logging is enabled, +.Nm sudo +will run the command in a pseudo-tty and log all user input and/or output, +depending on which options are enabled. +I/O is logged to the directory specified by the +.Em iolog_dir +option +.Po +.Pa @iolog_dir@ +by default +.Pc +using a unique session ID that is included in the +.Nm sudo +log line, prefixed with +.Dq Li TSID= . +The +.Em iolog_file +option may be used to control the format of the session ID. +.Pp +Each I/O log is stored in a separate directory that contains the +following files: +.Bl -tag -width 8n +.It Pa log +a text file containing the time the command was run, the name of the user +who ran +.Nm sudo , +the name of the target user, the name of the target group (optional), +the terminal that +.Nm sudo +was run from, the number of rows and columns of the terminal, +the working directory the command was run from and the path name of +the command itself (with arguments if present) +.It Pa timing +a log of the amount of time between, and the number of bytes in, each +I/O log entry (used for session playback) +.It Pa ttyin +input from the user's tty (what the user types) +.It Pa stdin +input from a pipe or file +.It Pa ttyout +output from the pseudo-tty (what the command writes to the screen) +.It Pa stdout +standard output to a pipe or redirected to a file +.It Pa stderr +standard error to a pipe or redirected to a file +.El +.Pp +All files other than +.Pa log +are compressed in gzip format unless the +.Em compress_io +flag has been disabled. +Due to buffering, it is not normally possible to display the I/O logs in +real-time as the program is executing +The I/O log data will not be complete until the program run by +.Nm sudo +has exited or has been terminated by a signal. +The +.Em iolog_flush +flag can be used to disable buffering, in which case I/O log data +is written to disk as soon as it is available. +The output portion of an I/O log file can be viewed with the +.Xr sudoreplay @mansectsu@ +utility, which can also be used to list or search the available logs. +.Pp +Note that user input may contain sensitive information such as +passwords (even if they are not echoed to the screen), which will +be stored in the log file unencrypted. +In most cases, logging the command output via +.Em log_output +or +.Li LOG_OUTPUT +is all that is required. +.Pp +Since each session's I/O logs are stored in a separate directory, +traditional log rotation utilities cannot be used to limit the +number of I/O logs. +The simplest way to limit the number of I/O is by setting the +.Em maxseq +option to the maximum number of logs you wish to store. +Once the I/O log sequence number reaches +.Em maxseq , +it will be reset to zero and +.Nm +will truncate and re-use any existing I/O logs. +.Sh FILES +.Bl -tag -width 24n +.It Pa @sysconfdir@/sudo.conf +Sudo front end configuration +.It Pa @sysconfdir@/sudoers +List of who can run what +.It Pa /etc/group +Local groups file +.It Pa /etc/netgroup +List of network groups +.It Pa @iolog_dir@ +I/O log files +.It Pa @rundir@/ts +Directory containing time stamps for the +.Nm sudoers +security policy +.It Pa @vardir@/lectured +Directory containing lecture status files for the +.Nm sudoers +security policy +.It Pa /etc/environment +Initial environment for +.Fl i +mode on AIX and Linux systems +.El +.Sh EXAMPLES +Below are example +.Em sudoers +file entries. +Admittedly, some of these are a bit contrived. +First, we allow a few environment variables to pass and then define our +.Em aliases : +.Bd -literal +# Run X applications through sudo; HOME is used to find the +# .Xauthority file. Note that other programs use HOME to find +# configuration files and this may lead to privilege escalation! +Defaults env_keep += "DISPLAY HOME" + +# User alias specification +User_Alias FULLTIMERS = millert, mikef, dowdy +User_Alias PARTTIMERS = bostley, jwfox, crawl +User_Alias WEBMASTERS = will, wendy, wim + +# Runas alias specification +Runas_Alias OP = root, operator +Runas_Alias DB = oracle, sybase +Runas_Alias ADMINGRP = adm, oper + +# Host alias specification +Host_Alias SPARC = bigtime, eclipse, moet, anchor :\e + SGI = grolsch, dandelion, black :\e + ALPHA = widget, thalamus, foobar :\e + HPPA = boa, nag, python +Host_Alias CUNETS = 128.138.0.0/255.255.0.0 +Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0 +Host_Alias SERVERS = master, mail, www, ns +Host_Alias CDROM = orion, perseus, hercules + +# Cmnd alias specification +Cmnd_Alias DUMPS = /usr/bin/mt, /usr/sbin/dump, /usr/sbin/rdump,\e + /usr/sbin/restore, /usr/sbin/rrestore,\e + sha224:0GomF8mNN3wlDt1HD9XldjJ3SNgpFdbjO1+NsQ== \e + /home/operator/bin/start_backups +Cmnd_Alias KILL = /usr/bin/kill +Cmnd_Alias PRINTING = /usr/sbin/lpc, /usr/bin/lprm +Cmnd_Alias SHUTDOWN = /usr/sbin/shutdown +Cmnd_Alias HALT = /usr/sbin/halt +Cmnd_Alias REBOOT = /usr/sbin/reboot +Cmnd_Alias SHELLS = /usr/bin/sh, /usr/bin/csh, /usr/bin/ksh,\e + /usr/local/bin/tcsh, /usr/bin/rsh,\e + /usr/local/bin/zsh +Cmnd_Alias SU = /usr/bin/su +Cmnd_Alias PAGERS = /usr/bin/more, /usr/bin/pg, /usr/bin/less +.Ed +.Pp +Here we override some of the compiled in default values. +We want +.Nm sudo +to log via +.Xr syslog 3 +using the +.Em auth +facility in all cases. +We don't want to subject the full time staff to the +.Nm sudo +lecture, user +.Sy millert +need not give a password, and we don't want to reset the +.Ev LOGNAME +or +.Ev USER +environment variables when running commands as root. +Additionally, on the machines in the +.Em SERVERS +.Li Host_Alias , +we keep an additional local log file and make sure we log the year +in each log line since the log entries will be kept around for several years. +Lastly, we disable shell escapes for the commands in the PAGERS +.Li Cmnd_Alias +.Po +.Pa /usr/bin/more , +.Pa /usr/bin/pg +and +.Pa /usr/bin/less +.Pc . +Note that this will not effectively constrain users with +.Nm sudo +.Sy ALL +privileges. +.Bd -literal +# Override built-in defaults +Defaults syslog=auth +Defaults>root !set_logname +Defaults:FULLTIMERS !lecture +Defaults:millert !authenticate +Defaults@SERVERS log_year, logfile=/var/log/sudo.log +Defaults!PAGERS noexec +.Ed +.Pp +The +.Em User specification +is the part that actually determines who may run what. +.Bd -literal +root ALL = (ALL) ALL +%wheel ALL = (ALL) ALL +.Ed +.Pp +We let +.Sy root +and any user in group +.Sy wheel +run any command on any host as any user. +.Bd -literal +FULLTIMERS ALL = NOPASSWD: ALL +.Ed +.Pp +Full time sysadmins +.Po +.Sy millert , +.Sy mikef , +and +.Sy dowdy +.Pc +may run any command on any host without authenticating themselves. +.Bd -literal +PARTTIMERS ALL = ALL +.Ed +.Pp +Part time sysadmins +.Sy bostley , +.Sy jwfox , +and +.Sy crawl ) +may run any command on any host but they must authenticate themselves +first (since the entry lacks the +.Li NOPASSWD +tag). +.Bd -literal +jack CSNETS = ALL +.Ed +.Pp +The user +.Sy jack +may run any command on the machines in the +.Em CSNETS +alias (the networks +.Li 128.138.243.0 , +.Li 128.138.204.0 , +and +.Li 128.138.242.0 ) . +Of those networks, only +.Li 128.138.204.0 +has an explicit netmask (in CIDR notation) indicating it is a class C network. +For the other networks in +.Em CSNETS , +the local machine's netmask will be used during matching. +.Bd -literal +lisa CUNETS = ALL +.Ed +.Pp +The user +.Sy lisa +may run any command on any host in the +.Em CUNETS +alias (the class B network +.Li 128.138.0.0 ) . +.Bd -literal +operator ALL = DUMPS, KILL, SHUTDOWN, HALT, REBOOT, PRINTING,\e + sudoedit /etc/printcap, /usr/oper/bin/ +.Ed +.Pp +The +.Sy operator +user may run commands limited to simple maintenance. +Here, those are commands related to backups, killing processes, the +printing system, shutting down the system, and any commands in the +directory +.Pa /usr/oper/bin/ . +Note that one command in the +.Li DUMPS +Cmnd_Alias includes a sha224 digest, +.Pa /home/operator/bin/start_backups . +This is because the directory containing the script is writable by the +operator user. +If the script is modified (resulting in a digest mismatch) it will no longer +be possible to run it via +.Nm sudo . +.Bd -literal +joe ALL = /usr/bin/su operator +.Ed +.Pp +The user +.Sy joe +may only +.Xr su 1 +to operator. +.Bd -literal +pete HPPA = /usr/bin/passwd [A-Za-z]*, !/usr/bin/passwd *root* + +%opers ALL = (: ADMINGRP) /usr/sbin/ +.Ed +.Pp +Users in the +.Sy opers +group may run commands in +.Pa /usr/sbin/ +as themselves +with any group in the +.Em ADMINGRP +.Li Runas_Alias +(the +.Sy adm +and +.Sy oper +groups). +.Pp +The user +.Sy pete +is allowed to change anyone's password except for +root on the +.Em HPPA +machines. +Because command line arguments are matched as a single, +concatenated string, the +.Ql * +wildcard will match +.Em multiple +words. +This example assumes that +.Xr passwd 1 +does not take multiple user names on the command line. +Note that on GNU systems, options to +.Xr passwd 1 +may be specified after the user argument. +As a result, this rule will also allow: +.Bd -literal -offset 4n +passwd username --expire +.Ed +.Pp +which may not be desirable. +.Bd -literal +bob SPARC = (OP) ALL : SGI = (OP) ALL +.Ed +.Pp +The user +.Sy bob +may run anything on the +.Em SPARC +and +.Em SGI +machines as any user listed in the +.Em OP +.Li Runas_Alias +.Po +.Sy root +and +.Sy operator . +.Pc +.Bd -literal +jim +biglab = ALL +.Ed +.Pp +The user +.Sy jim +may run any command on machines in the +.Em biglab +netgroup. +.Nm sudo +knows that +.Dq biglab +is a netgroup due to the +.Ql + +prefix. +.Bd -literal ++secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser +.Ed +.Pp +Users in the +.Sy secretaries +netgroup need to help manage the printers as well as add and remove users, +so they are allowed to run those commands on all machines. +.Bd -literal +fred ALL = (DB) NOPASSWD: ALL +.Ed +.Pp +The user +.Sy fred +can run commands as any user in the +.Em DB +.Li Runas_Alias +.Po +.Sy oracle +or +.Sy sybase +.Pc +without giving a password. +.Bd -literal +john ALPHA = /usr/bin/su [!-]*, !/usr/bin/su *root* +.Ed +.Pp +On the +.Em ALPHA +machines, user +.Sy john +may su to anyone except root but he is not allowed to specify any options +to the +.Xr su 1 +command. +.Bd -literal +jen ALL, !SERVERS = ALL +.Ed +.Pp +The user +.Sy jen +may run any command on any machine except for those in the +.Em SERVERS +.Li Host_Alias +(master, mail, www and ns). +.Bd -literal +jill SERVERS = /usr/bin/, !SU, !SHELLS +.Ed +.Pp +For any machine in the +.Em SERVERS +.Li Host_Alias , +.Sy jill +may run +any commands in the directory +.Pa /usr/bin/ +except for those commands +belonging to the +.Em SU +and +.Em SHELLS +.Li Cmnd_Aliases . +While not specifically mentioned in the rule, the commands in the +.Em PAGERS +.Li Cmnd_Alias +all reside in +.Pa /usr/bin +and have the +.Em noexec +option set. +.Bd -literal +steve CSNETS = (operator) /usr/local/op_commands/ +.Ed +.Pp +The user +.Sy steve +may run any command in the directory /usr/local/op_commands/ +but only as user operator. +.Bd -literal +matt valkyrie = KILL +.Ed +.Pp +On his personal workstation, valkyrie, +.Sy matt +needs to be able to kill hung processes. +.Bd -literal +WEBMASTERS www = (www) ALL, (root) /usr/bin/su www +.Ed +.Pp +On the host www, any user in the +.Em WEBMASTERS +.Li User_Alias +(will, wendy, and wim), may run any command as user www (which owns the +web pages) or simply +.Xr su 1 +to www. +.Bd -literal +ALL CDROM = NOPASSWD: /sbin/umount /CDROM,\e + /sbin/mount -o nosuid\e,nodev /dev/cd0a /CDROM +.Ed +.Pp +Any user may mount or unmount a CD-ROM on the machines in the CDROM +.Li Host_Alias +(orion, perseus, hercules) without entering a password. +This is a bit tedious for users to type, so it is a prime candidate +for encapsulating in a shell script. +.Sh SECURITY NOTES +.Ss Limitations of the So !\& Sc operator +It is generally not effective to +.Dq subtract +commands from +.Sy ALL +using the +.Ql !\& +operator. +A user can trivially circumvent this by copying the desired command +to a different name and then executing that. +For example: +.Bd -literal +bill ALL = ALL, !SU, !SHELLS +.Ed +.Pp +Doesn't really prevent +.Sy bill +from running the commands listed in +.Em SU +or +.Em SHELLS +since he can simply copy those commands to a different name, or use +a shell escape from an editor or other program. +Therefore, these kind of restrictions should be considered +advisory at best (and reinforced by policy). +.Pp +In general, if a user has sudo +.Sy ALL +there is nothing to prevent them from creating their own program that gives +them a root shell (or making their own copy of a shell) regardless of any +.Ql !\& +elements in the user specification. +.Ss Security implications of Em fast_glob +If the +.Em fast_glob +option is in use, it is not possible to reliably negate commands where the +path name includes globbing (aka wildcard) characters. +This is because the C library's +.Xr fnmatch 3 +function cannot resolve relative paths. +While this is typically only an inconvenience for rules that grant privileges, +it can result in a security issue for rules that subtract or revoke privileges. +.Pp +For example, given the following +.Em sudoers +file entry: +.Bd -literal +john ALL = /usr/bin/passwd [a-zA-Z0-9]*, /usr/bin/chsh [a-zA-Z0-9]*,\e + /usr/bin/chfn [a-zA-Z0-9]*, !/usr/bin/* root +.Ed +.Pp +User +.Sy john +can still run +.Li /usr/bin/passwd root +if +.Em fast_glob +is enabled by changing to +.Pa /usr/bin +and running +.Li ./passwd root +instead. +.Ss Preventing shell escapes +Once +.Nm sudo +executes a program, that program is free to do whatever +it pleases, including run other programs. +This can be a security issue since it is not uncommon for a program to +allow shell escapes, which lets a user bypass +.Nm sudo Ns 's +access control and logging. +Common programs that permit shell escapes include shells (obviously), +editors, paginators, mail and terminal programs. +.Pp +There are two basic approaches to this problem: +.Bl -tag -width 8n +.It restrict +Avoid giving users access to commands that allow the user to run +arbitrary commands. +Many editors have a restricted mode where shell +escapes are disabled, though +.Nm sudoedit +is a better solution to +running editors via +.Nm sudo . +Due to the large number of programs that +offer shell escapes, restricting users to the set of programs that +do not is often unworkable. +.It noexec +Many systems that support shared libraries have the ability to +override default library functions by pointing an environment +variable (usually +.Ev LD_PRELOAD ) +to an alternate shared library. +On such systems, +.Nm sudo Ns 's +.Em noexec +functionality can be used to prevent a program run by +.Nm sudo +from executing any other programs. +Note, however, that this applies only to native dynamically-linked +executables. +Statically-linked executables and foreign executables +running under binary emulation are not affected. +.Pp +The +.Em noexec +feature is known to work on SunOS, Solaris, *BSD, +Linux, IRIX, Tru64 UNIX, macOS, HP-UX 11.x and AIX 5.3 and above. +It should be supported on most operating systems that support the +.Ev LD_PRELOAD +environment variable. +Check your operating system's manual pages for the dynamic linker +(usually ld.so, ld.so.1, dyld, dld.sl, rld, or loader) to see if +.Ev LD_PRELOAD +is supported. +.Pp +On Solaris 10 and higher, +.Em noexec +uses Solaris privileges instead of the +.Ev LD_PRELOAD +environment variable. +.Pp +To enable +.Em noexec +for a command, use the +.Li NOEXEC +tag as documented +in the User Specification section above. +Here is that example again: +.Bd -literal +aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi +.Ed +.Pp +This allows user +.Sy aaron +to run +.Pa /usr/bin/more +and +.Pa /usr/bin/vi +with +.Em noexec +enabled. +This will prevent those two commands from +executing other commands (such as a shell). +If you are unsure whether or not your system is capable of supporting +.Em noexec +you can always just try it out and check whether shell escapes work when +.Em noexec +is enabled. +.El +.Pp +Note that restricting shell escapes is not a panacea. +Programs running as root are still capable of many potentially hazardous +operations (such as changing or overwriting files) that could lead +to unintended privilege escalation. +In the specific case of an editor, a safer approach is to give the +user permission to run +.Nm sudoedit +(see below). +.Ss Secure editing +The +.Nm sudoers +plugin includes +.Nm sudoedit +support which allows users to securely edit files with the editor +of their choice. +As +.Nm sudoedit +is a built-in command, it must be specified in the +.Em sudoers +file without a leading path. +However, it may take command line arguments just as a normal command does. +Wildcards used in +.Em sudoedit +command line arguments are expected to be path names, so a forward slash +.Pq Ql / +will not be matched by a wildcard. +.Pp +Unlike other +.Nm sudo +commands, the editor is run with the permissions of the invoking +user and with the environment unmodified. +More information may be found in the description of the +.Fl e +option in +.Xr sudo @mansectsu@ . +.Pp +For example, to allow user operator to edit the +.Dq message of the day +file: +.Bd -literal -offset indent +operator sudoedit /etc/motd +.Ed +.Pp +The operator user then runs +.Nm sudoedit +as follows: +.Bd -literal -offset indent +$ sudoedit /etc/motd +.Ed +.Pp +The editor will run as the operator user, not root, on a temporary copy of +.Pa /etc/motd . +After the file has been edited, +.Pa /etc/motd +will be updated with the contents of the temporary copy. +.Pp +Users should +.Em never +be granted +.Nm sudoedit +permission to edit a file that resides in a directory the user +has write access to, either directly or via a wildcard. +If the user has write access to the directory it is possible to +replace the legitimate file with a link to another file, +allowing the editing of arbitrary files. +To prevent this, starting with version 1.8.16, symbolic links will +not be followed in writable directories and +.Nm sudoedit +will refuse to edit a file located in a writable directory +unless the +.Em sudoedit_checkdir +option has been disabled or the invoking user is root. +Additionally, in version 1.8.15 and higher, +.Nm sudoedit +will refuse to open a symbolic link unless either the +.Em sudoedit_follow +option is enabled or the +.Em sudoedit +command is prefixed with the +.Li FOLLOW +tag in the +.Em sudoers +file. +.Ss Time stamp file checks +.Nm sudoers +will check the ownership of its time stamp directory +.Po +.Pa @rundir@/ts +by default +.Pc +and ignore the directory's contents if it is not owned by root or +if it is writable by a user other than root. +Older versions of +.Nm sudo +stored time stamp files in +.Pa /tmp ; +this is no longer recommended as it may be possible for a user +to create the time stamp themselves on systems that allow +unprivileged users to change the ownership of files they create. +.Pp +While the time stamp directory +.Em should +be cleared at reboot time, not all systems contain a +.Pa /run +or +.Pa /var/run +directory. +To avoid potential problems, +.Nm sudoers +will ignore time stamp files that date from before the machine booted +on systems where the boot time is available. +.Pp +Some systems with graphical desktop environments allow unprivileged +users to change the system clock. +Since +.Nm sudoers +relies on the system clock for time stamp validation, it may be +possible on such systems for a user to run +.Nm sudo +for longer than +.Em timestamp_timeout +by setting the clock back. +To combat this, +.Nm sudoers +uses a monotonic clock (which never moves backwards) for its time stamps +if the system supports it. +.Pp +.Nm sudoers +will not honor time stamps set far in the future. +Time stamps with a date greater than current_time + 2 * +.Li TIMEOUT +will be ignored and +.Nm sudoers +will log and complain. +.Pp +If the +.Em timestamp_type +option is set to +.Dq tty , +the time stamp record includes the device number of the terminal +the user authenticated with. +This provides per-terminal granularity but time stamp records may still +outlive the user's session. +.Pp +Unless the +.Em timestamp_type +option is set to +.Dq global , +the time stamp record also includes the session ID of the process +that last authenticated. +This prevents processes in different terminal sessions from using +the same time stamp record. +On systems where a process's start time can be queried, +the start time of the session leader +is recorded in the time stamp record. +If no terminal is present or the +.Em timestamp_type +option is set to +.Dq ppid , +the start time of the parent process is used instead. +In most cases this will prevent a time stamp record from being re-used +without the user entering a password when logging out and back in again. +.Sh DEBUGGING +Versions 1.8.4 and higher of the +.Nm +plugin support a flexible debugging framework that can help track +down what the plugin is doing internally if there is a problem. +This can be configured in the +.Xr sudo.conf @mansectform@ +file. +.Pp +The +.Nm +plugin uses the same debug flag format as the +.Nm sudo +front-end: +.Em subsystem Ns @ Ns Em priority . +.Pp +The priorities used by +.Nm , +in order of decreasing severity, +are: +.Em crit , err , warn , notice , diag , info , trace +and +.Em debug . +Each priority, when specified, also includes all priorities higher +than it. +For example, a priority of +.Em notice +would include debug messages logged at +.Em notice +and higher. +.Pp +The following subsystems are used by the +.Nm +plugin: +.Bl -tag -width 8n +.It Em alias +.Li User_Alias , +.Li Runas_Alias , +.Li Host_Alias +and +.Li Cmnd_Alias +processing +.It Em all +matches every subsystem +.It Em audit +BSM and Linux audit code +.It Em auth +user authentication +.It Em defaults +.Em sudoers +file +.Em Defaults +settings +.It Em env +environment handling +.It Em ldap +LDAP-based sudoers +.It Em logging +logging support +.It Em match +matching of users, groups, hosts and netgroups in the +.Em sudoers +file +.It Em netif +network interface handling +.It Em nss +network service switch handling in +.Nm sudoers +.It Em parser +.Em sudoers +file parsing +.It Em perms +permission setting +.It Em plugin +The equivalent of +.Em main +for the plugin. +.It Em pty +pseudo-tty related code +.It Em rbtree +redblack tree internals +.It Em sssd +SSSD-based sudoers +.It Em util +utility functions +.El +For example: +.Bd -literal +Debug sudo /var/log/sudo_debug match@info,nss@info +.Ed +.Pp +For more information, see the +.Xr sudo.conf @mansectform@ +manual. +.Sh SEE ALSO +.Xr ssh 1 , +.Xr su 1 , +.Xr fnmatch 3 , +.Xr glob 3 , +.Xr mktemp 3 , +.Xr strftime 3 , +.Xr sudo.conf @mansectform@ , +.Xr sudo_plugin @mansectform@ , +.Xr sudoers.ldap @mansectform@ , +.Xr sudoers_timestamp @mansectform@ , +.Xr sudo @mansectsu@ , +.Xr visudo @mansectsu@ +.Sh AUTHORS +Many people have worked on +.Nm sudo +over the years; this version consists of code written primarily by: +.Bd -ragged -offset indent +.An Todd C. Miller +.Ed +.Pp +See the CONTRIBUTORS file in the +.Nm sudo +distribution (https://www.sudo.ws/contributors.html) for an +exhaustive list of people who have contributed to +.Nm sudo . +.Sh CAVEATS +The +.Em sudoers +file should +.Sy always +be edited by the +.Nm visudo +command which locks the file and does grammatical checking. +It is +imperative that the +.Em sudoers +file be free of syntax errors since +.Nm sudo +will not run with a syntactically incorrect +.Em sudoers +file. +.Pp +When using netgroups of machines (as opposed to users), if you +store fully qualified host name in the netgroup (as is usually the +case), you either need to have the machine's host name be fully qualified +as returned by the +.Li hostname +command or use the +.Em fqdn +option in +.Em sudoers . +.Sh BUGS +If you feel you have found a bug in +.Nm sudo , +please submit a bug report at https://bugzilla.sudo.ws/ +.Sh SUPPORT +Limited free support is available via the sudo-users mailing list, +see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or +search the archives. +.Sh DISCLAIMER +.Nm sudo +is provided +.Dq AS IS +and any express or implied warranties, including, but not limited +to, the implied warranties of merchantability and fitness for a +particular purpose are disclaimed. +See the LICENSE file distributed with +.Nm sudo +or https://www.sudo.ws/license.html for complete details. |