Adding upstream version 241.upstream/241upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 1661 insertions, 0 deletions

diff --git a/src/udev/scsi_id/README b/src/udev/scsi_id/README
new file mode 100644
index 0000000..9cfe739
--- /dev/null
+++ b/src/udev/scsi_id/README
@@ -0,0 +1,4 @@
+scsi_id - generate a SCSI unique identifier for a given SCSI device
+
+Please send questions, comments or patches to <patmans@us.ibm.com> or
+<linux-hotplug-devel@lists.sourceforge.net>.
diff --git a/src/udev/scsi_id/scsi.h b/src/udev/scsi_id/scsi.h
new file mode 100644
index 0000000..208b3e7
--- /dev/null
+++ b/src/udev/scsi_id/scsi.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#pragma once
+
+/*
+ * scsi.h
+ *
+ * General scsi and linux scsi specific defines and structs.
+ *
+ * Copyright (C) IBM Corp. 2003
+ *
+ *        This program is free software; you can redistribute it and/or modify it
+ *        under the terms of the GNU General Public License as published by the
+ *        Free Software Foundation version 2 of the License.
+ */
+
+#include <scsi/scsi.h>
+
+struct scsi_ioctl_command {
+        unsigned inlen;        /* excluding scsi command length */
+        unsigned outlen;
+        unsigned char data[1];
+        /* on input, scsi command starts here then opt. data */
+};
+
+/*
+ * Default 5 second timeout
+ */
+#define DEF_TIMEOUT 5000
+
+#define SENSE_BUFF_LEN 32
+
+/*
+ * The request buffer size passed to the SCSI INQUIRY commands, use 254,
+ * as this is a nice value for some devices, especially some of the usb
+ * mass storage devices.
+ */
+#define SCSI_INQ_BUFF_LEN 254
+
+/*
+ * SCSI INQUIRY vendor and model (really product) lengths.
+ */
+#define VENDOR_LENGTH 8
+#define MODEL_LENGTH 16
+
+#define INQUIRY_CMD 0x12
+#define INQUIRY_CMDLEN 6
+
+/*
+ * INQUIRY VPD page 0x83 identifier descriptor related values. Reference the
+ * SCSI Primary Commands specification for details.
+ */
+
+/*
+ * id type values of id descriptors. These are assumed to fit in 4 bits.
+ */
+#define SCSI_ID_VENDOR_SPECIFIC 0
+#define SCSI_ID_T10_VENDOR      1
+#define SCSI_ID_EUI_64          2
+#define SCSI_ID_NAA             3
+#define SCSI_ID_RELPORT         4
+#define SCSI_ID_TGTGROUP        5
+#define SCSI_ID_LUNGROUP        6
+#define SCSI_ID_MD5             7
+#define SCSI_ID_NAME            8
+
+/*
+ * Supported NAA values. These fit in 4 bits, so the "don't care" value
+ * cannot conflict with real values.
+ */
+#define SCSI_ID_NAA_DONT_CARE         0xff
+#define SCSI_ID_NAA_IEEE_REG          0x05
+#define SCSI_ID_NAA_IEEE_REG_EXTENDED 0x06
+
+/*
+ * Supported Code Set values.
+ */
+#define SCSI_ID_BINARY 1
+#define SCSI_ID_ASCII  2
+
+struct scsi_id_search_values {
+        u_char id_type;
+        u_char naa_type;
+        u_char code_set;
+};
+
+/*
+ * Following are the "true" SCSI status codes. Linux has traditionally
+ * used a 1 bit right and masked version of these. So now CHECK_CONDITION
+ * and friends (in <scsi/scsi.h>) are deprecated.
+ */
+#define SCSI_CHECK_CONDITION         0x02
+#define SCSI_CONDITION_MET           0x04
+#define SCSI_BUSY                    0x08
+#define SCSI_IMMEDIATE               0x10
+#define SCSI_IMMEDIATE_CONDITION_MET 0x14
+#define SCSI_RESERVATION_CONFLICT    0x18
+#define SCSI_COMMAND_TERMINATED      0x22
+#define SCSI_TASK_SET_FULL           0x28
+#define SCSI_ACA_ACTIVE              0x30
+#define SCSI_TASK_ABORTED            0x40
diff --git a/src/udev/scsi_id/scsi_id.c b/src/udev/scsi_id/scsi_id.c
new file mode 100644
index 0000000..2698cdd
--- /dev/null
+++ b/src/udev/scsi_id/scsi_id.c
@@ -0,0 +1,597 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright © IBM Corp. 2003
+ * Copyright © SUSE Linux Products GmbH, 2006
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include "alloc-util.h"
+#include "build.h"
+#include "fd-util.h"
+#include "libudev-util.h"
+#include "scsi_id.h"
+#include "string-util.h"
+#include "strxcpyx.h"
+#include "udev-util.h"
+
+static const struct option options[] = {
+        { "device",             required_argument, NULL, 'd' },
+        { "config",             required_argument, NULL, 'f' },
+        { "page",               required_argument, NULL, 'p' },
+        { "blacklisted",        no_argument,       NULL, 'b' },
+        { "whitelisted",        no_argument,       NULL, 'g' },
+        { "replace-whitespace", no_argument,       NULL, 'u' },
+        { "sg-version",         required_argument, NULL, 's' },
+        { "verbose",            no_argument,       NULL, 'v' },
+        { "version",            no_argument,       NULL, 'V' }, /* don't advertise -V */
+        { "export",             no_argument,       NULL, 'x' },
+        { "help",               no_argument,       NULL, 'h' },
+        {}
+};
+
+static bool all_good = false;
+static bool dev_specified = false;
+static char config_file[MAX_PATH_LEN] = "/etc/scsi_id.config";
+static enum page_code default_page_code = PAGE_UNSPECIFIED;
+static int sg_version = 4;
+static bool reformat_serial = false;
+static bool export = false;
+static char vendor_str[64];
+static char model_str[64];
+static char vendor_enc_str[256];
+static char model_enc_str[256];
+static char revision_str[16];
+static char type_str[16];
+
+static void set_type(const char *from, char *to, size_t len) {
+        int type_num;
+        char *eptr;
+        const char *type = "generic";
+
+        type_num = strtoul(from, &eptr, 0);
+        if (eptr != from) {
+                switch (type_num) {
+                case 0:
+                        type = "disk";
+                        break;
+                case 1:
+                        type = "tape";
+                        break;
+                case 4:
+                        type = "optical";
+                        break;
+                case 5:
+                        type = "cd";
+                        break;
+                case 7:
+                        type = "optical";
+                        break;
+                case 0xe:
+                        type = "disk";
+                        break;
+                case 0xf:
+                        type = "optical";
+                        break;
+                default:
+                        break;
+                }
+        }
+        strscpy(to, len, type);
+}
+
+/*
+ * get_value:
+ *
+ * buf points to an '=' followed by a quoted string ("foo") or a string ending
+ * with a space or ','.
+ *
+ * Return a pointer to the NUL terminated string, returns NULL if no
+ * matches.
+ */
+static char *get_value(char **buffer) {
+        static const char *quote_string = "\"\n";
+        static const char *comma_string = ",\n";
+        char *val;
+        const char *end;
+
+        if (**buffer == '"') {
+                /*
+                 * skip leading quote, terminate when quote seen
+                 */
+                (*buffer)++;
+                end = quote_string;
+        } else {
+                end = comma_string;
+        }
+        val = strsep(buffer, end);
+        if (val && end == quote_string)
+                /*
+                 * skip trailing quote
+                 */
+                (*buffer)++;
+
+        while (isspace(**buffer))
+                (*buffer)++;
+
+        return val;
+}
+
+static int argc_count(char *opts) {
+        int i = 0;
+        while (*opts != '\0')
+                if (*opts++ == ' ')
+                        i++;
+        return i;
+}
+
+/*
+ * get_file_options:
+ *
+ * If vendor == NULL, find a line in the config file with only "OPTIONS=";
+ * if vendor and model are set find the first OPTIONS line in the config
+ * file that matches. Set argc and argv to match the OPTIONS string.
+ *
+ * vendor and model can end in '\n'.
+ */
+static int get_file_options(const char *vendor, const char *model,
+                            int *argc, char ***newargv) {
+        _cleanup_free_ char *buffer = NULL;
+        _cleanup_fclose_ FILE *f;
+        char *buf;
+        char *str1;
+        char *vendor_in, *model_in, *options_in; /* read in from file */
+        int lineno;
+        int c;
+        int retval = 0;
+
+        f = fopen(config_file, "re");
+        if (f == NULL) {
+                if (errno == ENOENT)
+                        return 1;
+                else {
+                        log_error_errno(errno, "can't open %s: %m", config_file);
+                        return -1;
+                }
+        }
+
+        /*
+         * Allocate a buffer rather than put it on the stack so we can
+         * keep it around to parse any options (any allocated newargv
+         * points into this buffer for its strings).
+         */
+        buffer = malloc(MAX_BUFFER_LEN);
+        if (!buffer)
+                return log_oom();
+
+        *newargv = NULL;
+        lineno = 0;
+        for (;;) {
+                vendor_in = model_in = options_in = NULL;
+
+                buf = fgets(buffer, MAX_BUFFER_LEN, f);
+                if (buf == NULL)
+                        break;
+                lineno++;
+                if (buf[strlen(buffer) - 1] != '\n') {
+                        log_error("Config file line %d too long", lineno);
+                        break;
+                }
+
+                while (isspace(*buf))
+                        buf++;
+
+                /* blank or all whitespace line */
+                if (*buf == '\0')
+                        continue;
+
+                /* comment line */
+                if (*buf == '#')
+                        continue;
+
+                str1 = strsep(&buf, "=");
+                if (str1 && strcaseeq(str1, "VENDOR")) {
+                        str1 = get_value(&buf);
+                        if (!str1) {
+                                retval = log_oom();
+                                break;
+                        }
+                        vendor_in = str1;
+
+                        str1 = strsep(&buf, "=");
+                        if (str1 && strcaseeq(str1, "MODEL")) {
+                                str1 = get_value(&buf);
+                                if (!str1) {
+                                        retval = log_oom();
+                                        break;
+                                }
+                                model_in = str1;
+                                str1 = strsep(&buf, "=");
+                        }
+                }
+
+                if (str1 && strcaseeq(str1, "OPTIONS")) {
+                        str1 = get_value(&buf);
+                        if (!str1) {
+                                retval = log_oom();
+                                break;
+                        }
+                        options_in = str1;
+                }
+
+                /*
+                 * Only allow: [vendor=foo[,model=bar]]options=stuff
+                 */
+                if (!options_in || (!vendor_in && model_in)) {
+                        log_error("Error parsing config file line %d '%s'", lineno, buffer);
+                        retval = -1;
+                        break;
+                }
+                if (vendor == NULL) {
+                        if (vendor_in == NULL)
+                                break;
+                } else if (vendor_in &&
+                           startswith(vendor, vendor_in) &&
+                           (!model_in || startswith(model, model_in))) {
+                                /*
+                                 * Matched vendor and optionally model.
+                                 *
+                                 * Note: a short vendor_in or model_in can
+                                 * give a partial match (that is FOO
+                                 * matches FOOBAR).
+                                 */
+                                break;
+                }
+        }
+
+        if (retval == 0) {
+                if (vendor_in != NULL || model_in != NULL ||
+                    options_in != NULL) {
+                        /*
+                         * Something matched. Allocate newargv, and store
+                         * values found in options_in.
+                         */
+                        strcpy(buffer, options_in);
+                        c = argc_count(buffer) + 2;
+                        *newargv = calloc(c, sizeof(**newargv));
+                        if (!*newargv)
+                                retval = log_oom();
+                        else {
+                                *argc = c;
+                                c = 0;
+                                /*
+                                 * argv[0] at 0 is skipped by getopt, but
+                                 * store the buffer address there for
+                                 * later freeing
+                                 */
+                                (*newargv)[c] = buffer;
+                                for (c = 1; c < *argc; c++)
+                                        (*newargv)[c] = strsep(&buffer, " \t");
+                                buffer = NULL;
+                        }
+                } else {
+                        /* No matches  */
+                        retval = 1;
+                }
+        }
+        return retval;
+}
+
+static void help(void) {
+        printf("Usage: %s [OPTION...] DEVICE\n\n"
+               "SCSI device identification.\n\n"
+               "  -h --help                        Print this message\n"
+               "     --version                     Print version of the program\n\n"
+               "  -d --device=                     Device node for SG_IO commands\n"
+               "  -f --config=                     Location of config file\n"
+               "  -p --page=0x80|0x83|pre-spc3-83  SCSI page (0x80, 0x83, pre-spc3-83)\n"
+               "  -s --sg-version=3|4              Use SGv3 or SGv4\n"
+               "  -b --blacklisted                 Treat device as blacklisted\n"
+               "  -g --whitelisted                 Treat device as whitelisted\n"
+               "  -u --replace-whitespace          Replace all whitespace by underscores\n"
+               "  -v --verbose                     Verbose logging\n"
+               "  -x --export                      Print values as environment keys\n"
+               , program_invocation_short_name);
+
+}
+
+static int set_options(int argc, char **argv,
+                       char *maj_min_dev) {
+        int option;
+
+        /*
+         * optind is a global extern used by getopt. Since we can call
+         * set_options twice (once for command line, and once for config
+         * file) we have to reset this back to 1.
+         */
+        optind = 1;
+        while ((option = getopt_long(argc, argv, "d:f:gp:uvVxhbs:", options, NULL)) >= 0)
+                switch (option) {
+                case 'b':
+                        all_good = false;
+                        break;
+
+                case 'd':
+                        dev_specified = true;
+                        strscpy(maj_min_dev, MAX_PATH_LEN, optarg);
+                        break;
+
+                case 'f':
+                        strscpy(config_file, MAX_PATH_LEN, optarg);
+                        break;
+
+                case 'g':
+                        all_good = true;
+                        break;
+
+                case 'h':
+                        help();
+                        exit(EXIT_SUCCESS);
+
+                case 'p':
+                        if (streq(optarg, "0x80"))
+                                default_page_code = PAGE_80;
+                        else if (streq(optarg, "0x83"))
+                                default_page_code = PAGE_83;
+                        else if (streq(optarg, "pre-spc3-83"))
+                                default_page_code = PAGE_83_PRE_SPC3;
+                        else {
+                                log_error("Unknown page code '%s'", optarg);
+                                return -1;
+                        }
+                        break;
+
+                case 's':
+                        sg_version = atoi(optarg);
+                        if (sg_version < 3 || sg_version > 4) {
+                                log_error("Unknown SG version '%s'", optarg);
+                                return -1;
+                        }
+                        break;
+
+                case 'u':
+                        reformat_serial = true;
+                        break;
+
+                case 'v':
+                        log_set_target(LOG_TARGET_CONSOLE);
+                        log_set_max_level(LOG_DEBUG);
+                        log_open();
+                        break;
+
+                case 'V':
+                        printf("%s\n", GIT_VERSION);
+                        exit(EXIT_SUCCESS);
+
+                case 'x':
+                        export = true;
+                        break;
+
+                case '?':
+                        return -1;
+
+                default:
+                        assert_not_reached("Unknown option");
+                }
+
+        if (optind < argc && !dev_specified) {
+                dev_specified = true;
+                strscpy(maj_min_dev, MAX_PATH_LEN, argv[optind]);
+        }
+
+        return 0;
+}
+
+static int per_dev_options(struct scsi_id_device *dev_scsi, int *good_bad, int *page_code) {
+        int retval;
+        int newargc;
+        char **newargv = NULL;
+        int option;
+
+        *good_bad = all_good;
+        *page_code = default_page_code;
+
+        retval = get_file_options(vendor_str, model_str, &newargc, &newargv);
+
+        optind = 1; /* reset this global extern */
+        while (retval == 0) {
+                option = getopt_long(newargc, newargv, "bgp:", options, NULL);
+                if (option == -1)
+                        break;
+
+                switch (option) {
+                case 'b':
+                        *good_bad = 0;
+                        break;
+
+                case 'g':
+                        *good_bad = 1;
+                        break;
+
+                case 'p':
+                        if (streq(optarg, "0x80")) {
+                                *page_code = PAGE_80;
+                        } else if (streq(optarg, "0x83")) {
+                                *page_code = PAGE_83;
+                        } else if (streq(optarg, "pre-spc3-83")) {
+                                *page_code = PAGE_83_PRE_SPC3;
+                        } else {
+                                log_error("Unknown page code '%s'", optarg);
+                                retval = -1;
+                        }
+                        break;
+
+                default:
+                        log_error("Unknown or bad option '%c' (0x%x)", option, option);
+                        retval = -1;
+                        break;
+                }
+        }
+
+        if (newargv) {
+                free(newargv[0]);
+                free(newargv);
+        }
+        return retval;
+}
+
+static int set_inq_values(struct scsi_id_device *dev_scsi, const char *path) {
+        int retval;
+
+        dev_scsi->use_sg = sg_version;
+
+        retval = scsi_std_inquiry(dev_scsi, path);
+        if (retval)
+                return retval;
+
+        udev_util_encode_string(dev_scsi->vendor, vendor_enc_str, sizeof(vendor_enc_str));
+        udev_util_encode_string(dev_scsi->model, model_enc_str, sizeof(model_enc_str));
+
+        util_replace_whitespace(dev_scsi->vendor, vendor_str, sizeof(vendor_str)-1);
+        util_replace_chars(vendor_str, NULL);
+        util_replace_whitespace(dev_scsi->model, model_str, sizeof(model_str)-1);
+        util_replace_chars(model_str, NULL);
+        set_type(dev_scsi->type, type_str, sizeof(type_str));
+        util_replace_whitespace(dev_scsi->revision, revision_str, sizeof(revision_str)-1);
+        util_replace_chars(revision_str, NULL);
+        return 0;
+}
+
+/*
+ * scsi_id: try to get an id, if one is found, printf it to stdout.
+ * returns a value passed to exit() - 0 if printed an id, else 1.
+ */
+static int scsi_id(char *maj_min_dev) {
+        struct scsi_id_device dev_scsi = {};
+        int good_dev;
+        int page_code;
+        int retval = 0;
+
+        if (set_inq_values(&dev_scsi, maj_min_dev) < 0) {
+                retval = 1;
+                goto out;
+        }
+
+        /* get per device (vendor + model) options from the config file */
+        per_dev_options(&dev_scsi, &good_dev, &page_code);
+        if (!good_dev) {
+                retval = 1;
+                goto out;
+        }
+
+        /* read serial number from mode pages (no values for optical drives) */
+        scsi_get_serial(&dev_scsi, maj_min_dev, page_code, MAX_SERIAL_LEN);
+
+        if (export) {
+                char serial_str[MAX_SERIAL_LEN];
+
+                printf("ID_SCSI=1\n");
+                printf("ID_VENDOR=%s\n", vendor_str);
+                printf("ID_VENDOR_ENC=%s\n", vendor_enc_str);
+                printf("ID_MODEL=%s\n", model_str);
+                printf("ID_MODEL_ENC=%s\n", model_enc_str);
+                printf("ID_REVISION=%s\n", revision_str);
+                printf("ID_TYPE=%s\n", type_str);
+                if (dev_scsi.serial[0] != '\0') {
+                        util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str)-1);
+                        util_replace_chars(serial_str, NULL);
+                        printf("ID_SERIAL=%s\n", serial_str);
+                        util_replace_whitespace(dev_scsi.serial_short, serial_str, sizeof(serial_str)-1);
+                        util_replace_chars(serial_str, NULL);
+                        printf("ID_SERIAL_SHORT=%s\n", serial_str);
+                }
+                if (dev_scsi.wwn[0] != '\0') {
+                        printf("ID_WWN=0x%s\n", dev_scsi.wwn);
+                        if (dev_scsi.wwn_vendor_extension[0] != '\0') {
+                                printf("ID_WWN_VENDOR_EXTENSION=0x%s\n", dev_scsi.wwn_vendor_extension);
+                                printf("ID_WWN_WITH_EXTENSION=0x%s%s\n", dev_scsi.wwn, dev_scsi.wwn_vendor_extension);
+                        } else
+                                printf("ID_WWN_WITH_EXTENSION=0x%s\n", dev_scsi.wwn);
+                }
+                if (dev_scsi.tgpt_group[0] != '\0')
+                        printf("ID_TARGET_PORT=%s\n", dev_scsi.tgpt_group);
+                if (dev_scsi.unit_serial_number[0] != '\0')
+                        printf("ID_SCSI_SERIAL=%s\n", dev_scsi.unit_serial_number);
+                goto out;
+        }
+
+        if (dev_scsi.serial[0] == '\0') {
+                retval = 1;
+                goto out;
+        }
+
+        if (reformat_serial) {
+                char serial_str[MAX_SERIAL_LEN];
+
+                util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str)-1);
+                util_replace_chars(serial_str, NULL);
+                printf("%s\n", serial_str);
+                goto out;
+        }
+
+        printf("%s\n", dev_scsi.serial);
+out:
+        return retval;
+}
+
+int main(int argc, char **argv) {
+        int retval = 0;
+        char maj_min_dev[MAX_PATH_LEN];
+        int newargc;
+        char **newargv = NULL;
+
+        log_set_target(LOG_TARGET_AUTO);
+        udev_parse_config();
+        log_parse_environment();
+        log_open();
+
+        /*
+         * Get config file options.
+         */
+        retval = get_file_options(NULL, NULL, &newargc, &newargv);
+        if (retval < 0) {
+                retval = 1;
+                goto exit;
+        }
+        if (retval == 0) {
+                assert(newargv);
+
+                if (set_options(newargc, newargv, maj_min_dev) < 0) {
+                        retval = 2;
+                        goto exit;
+                }
+        }
+
+        /*
+         * Get command line options (overriding any config file settings).
+         */
+        if (set_options(argc, argv, maj_min_dev) < 0)
+                exit(EXIT_FAILURE);
+
+        if (!dev_specified) {
+                log_error("No device specified.");
+                retval = 1;
+                goto exit;
+        }
+
+        retval = scsi_id(maj_min_dev);
+
+exit:
+        if (newargv) {
+                free(newargv[0]);
+                free(newargv);
+        }
+        log_close();
+        return retval;
+}
diff --git a/src/udev/scsi_id/scsi_id.h b/src/udev/scsi_id/scsi_id.h
new file mode 100644
index 0000000..70e804f
--- /dev/null
+++ b/src/udev/scsi_id/scsi_id.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#pragma once
+
+/*
+ * Copyright © IBM Corp. 2003
+ */
+
+#define MAX_PATH_LEN 512
+
+/*
+ * MAX_ATTR_LEN: maximum length of the result of reading a sysfs
+ * attribute.
+ */
+#define MAX_ATTR_LEN 256
+
+/*
+ * MAX_SERIAL_LEN: the maximum length of the serial number, including
+ * added prefixes such as vendor and product (model) strings.
+ */
+#define MAX_SERIAL_LEN 256
+
+/*
+ * MAX_BUFFER_LEN: maximum buffer size and line length used while reading
+ * the config file.
+ */
+#define MAX_BUFFER_LEN 256
+
+struct scsi_id_device {
+        char vendor[9];
+        char model[17];
+        char revision[5];
+        char type[33];
+        char kernel[64];
+        char serial[MAX_SERIAL_LEN];
+        char serial_short[MAX_SERIAL_LEN];
+        int use_sg;
+
+        /* Always from page 0x80 e.g. 'B3G1P8500RWT' - may not be unique */
+        char unit_serial_number[MAX_SERIAL_LEN];
+
+        /* NULs if not set - otherwise hex encoding using lower-case e.g. '50014ee0016eb572' */
+        char wwn[17];
+
+        /* NULs if not set - otherwise hex encoding using lower-case e.g. '0xe00000d80000' */
+        char wwn_vendor_extension[17];
+
+        /* NULs if not set - otherwise decimal number */
+        char tgpt_group[8];
+};
+
+int scsi_std_inquiry(struct scsi_id_device *dev_scsi, const char *devname);
+int scsi_get_serial(struct scsi_id_device *dev_scsi, const char *devname,
+                    int page_code, int len);
+
+/*
+ * Page code values.
+ */
+enum page_code {
+        PAGE_83_PRE_SPC3 = -0x83,
+        PAGE_UNSPECIFIED = 0x00,
+        PAGE_80          = 0x80,
+        PAGE_83          = 0x83,
+};
diff --git a/src/udev/scsi_id/scsi_serial.c b/src/udev/scsi_id/scsi_serial.c
new file mode 100644
index 0000000..c67d047
--- /dev/null
+++ b/src/udev/scsi_id/scsi_serial.c
@@ -0,0 +1,897 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright © IBM Corp. 2003
+ *
+ * Author: Patrick Mansfield<patmans@us.ibm.com>
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <linux/bsg.h>
+#include <linux/types.h>
+#include <scsi/scsi.h>
+#include <scsi/sg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "random-util.h"
+#include "scsi.h"
+#include "scsi_id.h"
+#include "string-util.h"
+#include "util.h"
+
+/*
+ * A priority based list of id, naa, and binary/ascii for the identifier
+ * descriptor in VPD page 0x83.
+ *
+ * Brute force search for a match starting with the first value in the
+ * following id_search_list. This is not a performance issue, since there
+ * is normally one or some small number of descriptors.
+ */
+static const struct scsi_id_search_values id_search_list[] = {
+        { SCSI_ID_TGTGROUP, SCSI_ID_NAA_DONT_CARE,         SCSI_ID_BINARY },
+        { SCSI_ID_NAA,      SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_BINARY },
+        { SCSI_ID_NAA,      SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_ASCII  },
+        { SCSI_ID_NAA,      SCSI_ID_NAA_IEEE_REG,          SCSI_ID_BINARY },
+        { SCSI_ID_NAA,      SCSI_ID_NAA_IEEE_REG,          SCSI_ID_ASCII  },
+        /*
+         * Devices already exist using NAA values that are now marked
+         * reserved. These should not conflict with other values, or it is
+         * a bug in the device. As long as we find the IEEE extended one
+         * first, we really don't care what other ones are used. Using
+         * don't care here means that a device that returns multiple
+         * non-IEEE descriptors in a random order will get different
+         * names.
+         */
+        { SCSI_ID_NAA,             SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+        { SCSI_ID_NAA,             SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII  },
+        { SCSI_ID_EUI_64,          SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+        { SCSI_ID_EUI_64,          SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII  },
+        { SCSI_ID_T10_VENDOR,      SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+        { SCSI_ID_T10_VENDOR,      SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII  },
+        { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+        { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII  },
+};
+
+static const char hex_str[]="0123456789abcdef";
+
+/*
+ * Values returned in the result/status, only the ones used by the code
+ * are used here.
+ */
+
+#define DID_NO_CONNECT               0x01        /* Unable to connect before timeout */
+#define DID_BUS_BUSY                 0x02        /* Bus remain busy until timeout */
+#define DID_TIME_OUT                 0x03        /* Timed out for some other reason */
+#define DRIVER_TIMEOUT               0x06
+#define DRIVER_SENSE                 0x08        /* Sense_buffer has been set */
+
+/* The following "category" function returns one of the following */
+#define SG_ERR_CAT_CLEAN                0        /* No errors or other information */
+#define SG_ERR_CAT_MEDIA_CHANGED        1        /* interpreted from sense buffer */
+#define SG_ERR_CAT_RESET                2        /* interpreted from sense buffer */
+#define SG_ERR_CAT_TIMEOUT              3
+#define SG_ERR_CAT_RECOVERED            4        /* Successful command after recovered err */
+#define SG_ERR_CAT_NOTSUPPORTED         5        /* Illegal / unsupported command */
+#define SG_ERR_CAT_SENSE               98        /* Something else in the sense buffer */
+#define SG_ERR_CAT_OTHER               99        /* Some other error/warning */
+
+static int do_scsi_page80_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                                  char *serial, char *serial_short, int max_len);
+
+static int sg_err_category_new(int scsi_status, int msg_status, int
+                               host_status, int driver_status, const
+                               unsigned char *sense_buffer, int sb_len) {
+        scsi_status &= 0x7e;
+
+        /*
+         * XXX change to return only two values - failed or OK.
+         */
+
+        if (!scsi_status && !host_status && !driver_status)
+                return SG_ERR_CAT_CLEAN;
+
+        if (IN_SET(scsi_status, SCSI_CHECK_CONDITION, SCSI_COMMAND_TERMINATED) ||
+            (driver_status & 0xf) == DRIVER_SENSE) {
+                if (sense_buffer && (sb_len > 2)) {
+                        int sense_key;
+                        unsigned char asc;
+
+                        if (sense_buffer[0] & 0x2) {
+                                sense_key = sense_buffer[1] & 0xf;
+                                asc = sense_buffer[2];
+                        } else {
+                                sense_key = sense_buffer[2] & 0xf;
+                                asc = (sb_len > 12) ? sense_buffer[12] : 0;
+                        }
+
+                        if (sense_key == RECOVERED_ERROR)
+                                return SG_ERR_CAT_RECOVERED;
+                        else if (sense_key == UNIT_ATTENTION) {
+                                if (0x28 == asc)
+                                        return SG_ERR_CAT_MEDIA_CHANGED;
+                                if (0x29 == asc)
+                                        return SG_ERR_CAT_RESET;
+                        } else if (sense_key == ILLEGAL_REQUEST)
+                                return SG_ERR_CAT_NOTSUPPORTED;
+                }
+                return SG_ERR_CAT_SENSE;
+        }
+        if (host_status) {
+                if (IN_SET(host_status, DID_NO_CONNECT, DID_BUS_BUSY, DID_TIME_OUT))
+                        return SG_ERR_CAT_TIMEOUT;
+        }
+        if (driver_status) {
+                if (driver_status == DRIVER_TIMEOUT)
+                        return SG_ERR_CAT_TIMEOUT;
+        }
+        return SG_ERR_CAT_OTHER;
+}
+
+static int sg_err_category3(struct sg_io_hdr *hp) {
+        return sg_err_category_new(hp->status, hp->msg_status,
+                                   hp->host_status, hp->driver_status,
+                                   hp->sbp, hp->sb_len_wr);
+}
+
+static int sg_err_category4(struct sg_io_v4 *hp) {
+        return sg_err_category_new(hp->device_status, 0,
+                                   hp->transport_status, hp->driver_status,
+                                   (unsigned char *)(uintptr_t)hp->response,
+                                   hp->response_len);
+}
+
+static int scsi_dump_sense(struct scsi_id_device *dev_scsi,
+                           unsigned char *sense_buffer, int sb_len) {
+        int s;
+        int code;
+        int sense_class;
+        int sense_key;
+        int asc, ascq;
+
+        /*
+         * Figure out and print the sense key, asc and ascq.
+         *
+         * If you want to suppress these for a particular drive model, add
+         * a black list entry in the scsi_id config file.
+         *
+         * XXX We probably need to: lookup the sense/asc/ascq in a retry
+         * table, and if found return 1 (after dumping the sense, asc, and
+         * ascq). So, if/when we get something like a power on/reset,
+         * we'll retry the command.
+         */
+
+        if (sb_len < 1) {
+                log_debug("%s: sense buffer empty", dev_scsi->kernel);
+                return -1;
+        }
+
+        sense_class = (sense_buffer[0] >> 4) & 0x07;
+        code = sense_buffer[0] & 0xf;
+
+        if (sense_class == 7) {
+                /*
+                 * extended sense data.
+                 */
+                s = sense_buffer[7] + 8;
+                if (sb_len < s) {
+                        log_debug("%s: sense buffer too small %d bytes, %d bytes too short",
+                                  dev_scsi->kernel, sb_len, s - sb_len);
+                        return -1;
+                }
+                if (IN_SET(code, 0x0, 0x1)) {
+                        sense_key = sense_buffer[2] & 0xf;
+                        if (s < 14) {
+                                /*
+                                 * Possible?
+                                 */
+                                log_debug("%s: sense result too" " small %d bytes",
+                                          dev_scsi->kernel, s);
+                                return -1;
+                        }
+                        asc = sense_buffer[12];
+                        ascq = sense_buffer[13];
+                } else if (IN_SET(code, 0x2, 0x3)) {
+                        sense_key = sense_buffer[1] & 0xf;
+                        asc = sense_buffer[2];
+                        ascq = sense_buffer[3];
+                } else {
+                        log_debug("%s: invalid sense code 0x%x",
+                                  dev_scsi->kernel, code);
+                        return -1;
+                }
+                log_debug("%s: sense key 0x%x ASC 0x%x ASCQ 0x%x",
+                          dev_scsi->kernel, sense_key, asc, ascq);
+        } else {
+                if (sb_len < 4) {
+                        log_debug("%s: sense buffer too small %d bytes, %d bytes too short",
+                                  dev_scsi->kernel, sb_len, 4 - sb_len);
+                        return -1;
+                }
+
+                if (sense_buffer[0] < 15)
+                        log_debug("%s: old sense key: 0x%x", dev_scsi->kernel, sense_buffer[0] & 0x0f);
+                else
+                        log_debug("%s: sense = %2x %2x",
+                                  dev_scsi->kernel, sense_buffer[0], sense_buffer[2]);
+                log_debug("%s: non-extended sense class %d code 0x%0x",
+                          dev_scsi->kernel, sense_class, code);
+
+        }
+
+        return -1;
+}
+
+static int scsi_dump(struct scsi_id_device *dev_scsi, struct sg_io_hdr *io) {
+        if (!io->status && !io->host_status && !io->msg_status &&
+            !io->driver_status) {
+                /*
+                 * Impossible, should not be called.
+                 */
+                log_debug("%s: called with no error", __FUNCTION__);
+                return -1;
+        }
+
+        log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x 0x%x",
+                  dev_scsi->kernel, io->driver_status, io->host_status, io->msg_status, io->status);
+        if (io->status == SCSI_CHECK_CONDITION)
+                return scsi_dump_sense(dev_scsi, io->sbp, io->sb_len_wr);
+        else
+                return -1;
+}
+
+static int scsi_dump_v4(struct scsi_id_device *dev_scsi, struct sg_io_v4 *io) {
+        if (!io->device_status && !io->transport_status &&
+            !io->driver_status) {
+                /*
+                 * Impossible, should not be called.
+                 */
+                log_debug("%s: called with no error", __FUNCTION__);
+                return -1;
+        }
+
+        log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x",
+                  dev_scsi->kernel, io->driver_status, io->transport_status, io->device_status);
+        if (io->device_status == SCSI_CHECK_CONDITION)
+                return scsi_dump_sense(dev_scsi, (unsigned char *)(uintptr_t)io->response,
+                                       io->response_len);
+        else
+                return -1;
+}
+
+static int scsi_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                        unsigned char evpd, unsigned char page,
+                        unsigned char *buf, unsigned buflen) {
+        unsigned char inq_cmd[INQUIRY_CMDLEN] =
+                { INQUIRY_CMD, evpd, page, 0, buflen, 0 };
+        unsigned char sense[SENSE_BUFF_LEN];
+        void *io_buf;
+        struct sg_io_v4 io_v4;
+        struct sg_io_hdr io_hdr;
+        int retry = 3; /* rather random */
+        int retval;
+
+        if (buflen > SCSI_INQ_BUFF_LEN) {
+                log_debug("buflen %d too long", buflen);
+                return -1;
+        }
+
+resend:
+        if (dev_scsi->use_sg == 4) {
+                memzero(&io_v4, sizeof(struct sg_io_v4));
+                io_v4.guard = 'Q';
+                io_v4.protocol = BSG_PROTOCOL_SCSI;
+                io_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD;
+                io_v4.request_len = sizeof(inq_cmd);
+                io_v4.request = (uintptr_t)inq_cmd;
+                io_v4.max_response_len = sizeof(sense);
+                io_v4.response = (uintptr_t)sense;
+                io_v4.din_xfer_len = buflen;
+                io_v4.din_xferp = (uintptr_t)buf;
+                io_buf = (void *)&io_v4;
+        } else {
+                memzero(&io_hdr, sizeof(struct sg_io_hdr));
+                io_hdr.interface_id = 'S';
+                io_hdr.cmd_len = sizeof(inq_cmd);
+                io_hdr.mx_sb_len = sizeof(sense);
+                io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
+                io_hdr.dxfer_len = buflen;
+                io_hdr.dxferp = buf;
+                io_hdr.cmdp = inq_cmd;
+                io_hdr.sbp = sense;
+                io_hdr.timeout = DEF_TIMEOUT;
+                io_buf = (void *)&io_hdr;
+        }
+
+        retval = ioctl(fd, SG_IO, io_buf);
+        if (retval < 0) {
+                if (IN_SET(errno, EINVAL, ENOSYS) && dev_scsi->use_sg == 4) {
+                        dev_scsi->use_sg = 3;
+                        goto resend;
+                }
+                log_debug_errno(errno, "%s: ioctl failed: %m", dev_scsi->kernel);
+                goto error;
+        }
+
+        if (dev_scsi->use_sg == 4)
+                retval = sg_err_category4(io_buf);
+        else
+                retval = sg_err_category3(io_buf);
+
+        switch (retval) {
+                case SG_ERR_CAT_NOTSUPPORTED:
+                        buf[1] = 0;
+                        _fallthrough_;
+                case SG_ERR_CAT_CLEAN:
+                case SG_ERR_CAT_RECOVERED:
+                        retval = 0;
+                        break;
+
+                default:
+                        if (dev_scsi->use_sg == 4)
+                                retval = scsi_dump_v4(dev_scsi, io_buf);
+                        else
+                                retval = scsi_dump(dev_scsi, io_buf);
+        }
+
+        if (!retval) {
+                retval = buflen;
+        } else if (retval > 0) {
+                if (--retry > 0)
+                        goto resend;
+                retval = -1;
+        }
+
+error:
+        if (retval < 0)
+                log_debug("%s: Unable to get INQUIRY vpd %d page 0x%x.",
+                          dev_scsi->kernel, evpd, page);
+
+        return retval;
+}
+
+/* Get list of supported EVPD pages */
+static int do_scsi_page0_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                                 unsigned char *buffer, unsigned len) {
+        int retval;
+
+        memzero(buffer, len);
+        retval = scsi_inquiry(dev_scsi, fd, 1, 0x0, buffer, len);
+        if (retval < 0)
+                return 1;
+
+        if (buffer[1] != 0) {
+                log_debug("%s: page 0 not available.", dev_scsi->kernel);
+                return 1;
+        }
+        if (buffer[3] > len) {
+                log_debug("%s: page 0 buffer too long %d", dev_scsi->kernel, buffer[3]);
+                return 1;
+        }
+
+        /*
+         * Following check is based on code once included in the 2.5.x
+         * kernel.
+         *
+         * Some ill behaved devices return the standard inquiry here
+         * rather than the evpd data, snoop the data to verify.
+         */
+        if (buffer[3] > MODEL_LENGTH) {
+                /*
+                 * If the vendor id appears in the page assume the page is
+                 * invalid.
+                 */
+                if (strneq((char *)&buffer[VENDOR_LENGTH], dev_scsi->vendor, VENDOR_LENGTH)) {
+                        log_debug("%s: invalid page0 data", dev_scsi->kernel);
+                        return 1;
+                }
+        }
+        return 0;
+}
+
+/*
+ * The caller checks that serial is long enough to include the vendor +
+ * model.
+ */
+static int prepend_vendor_model(struct scsi_id_device *dev_scsi, char *serial) {
+        int ind;
+
+        strncpy(serial, dev_scsi->vendor, VENDOR_LENGTH);
+        strncat(serial, dev_scsi->model, MODEL_LENGTH);
+        ind = strlen(serial);
+
+        /*
+         * This is not a complete check, since we are using strncat/cpy
+         * above, ind will never be too large.
+         */
+        if (ind != (VENDOR_LENGTH + MODEL_LENGTH)) {
+                log_debug("%s: expected length %d, got length %d",
+                          dev_scsi->kernel, (VENDOR_LENGTH + MODEL_LENGTH), ind);
+                return -1;
+        }
+        return ind;
+}
+
+/*
+ * check_fill_0x83_id - check the page 0x83 id, if OK allocate and fill
+ * serial number.
+ */
+static int check_fill_0x83_id(struct scsi_id_device *dev_scsi,
+                              unsigned char *page_83,
+                              const struct scsi_id_search_values
+                              *id_search, char *serial, char *serial_short,
+                              int max_len, char *wwn,
+                              char *wwn_vendor_extension, char *tgpt_group) {
+        int i, j, s, len;
+
+        /*
+         * ASSOCIATION must be with the device (value 0)
+         * or with the target port for SCSI_ID_TGTPORT
+         */
+        if ((page_83[1] & 0x30) == 0x10) {
+                if (id_search->id_type != SCSI_ID_TGTGROUP)
+                        return 1;
+        } else if ((page_83[1] & 0x30) != 0)
+                return 1;
+
+        if ((page_83[1] & 0x0f) != id_search->id_type)
+                return 1;
+
+        /*
+         * Possibly check NAA sub-type.
+         */
+        if ((id_search->naa_type != SCSI_ID_NAA_DONT_CARE) &&
+            (id_search->naa_type != (page_83[4] & 0xf0) >> 4))
+                return 1;
+
+        /*
+         * Check for matching code set - ASCII or BINARY.
+         */
+        if ((page_83[0] & 0x0f) != id_search->code_set)
+                return 1;
+
+        /*
+         * page_83[3]: identifier length
+         */
+        len = page_83[3];
+        if ((page_83[0] & 0x0f) != SCSI_ID_ASCII)
+                /*
+                 * If not ASCII, use two bytes for each binary value.
+                 */
+                len *= 2;
+
+        /*
+         * Add one byte for the NUL termination, and one for the id_type.
+         */
+        len += 2;
+        if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC)
+                len += VENDOR_LENGTH + MODEL_LENGTH;
+
+        if (max_len < len) {
+                log_debug("%s: length %d too short - need %d",
+                          dev_scsi->kernel, max_len, len);
+                return 1;
+        }
+
+        if (id_search->id_type == SCSI_ID_TGTGROUP && tgpt_group != NULL) {
+                unsigned group;
+
+                group = ((unsigned)page_83[6] << 8) | page_83[7];
+                sprintf(tgpt_group,"%x", group);
+                return 1;
+        }
+
+        serial[0] = hex_str[id_search->id_type];
+
+        /*
+         * For SCSI_ID_VENDOR_SPECIFIC prepend the vendor and model before
+         * the id since it is not unique across all vendors and models,
+         * this differs from SCSI_ID_T10_VENDOR, where the vendor is
+         * included in the identifier.
+         */
+        if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC)
+                if (prepend_vendor_model(dev_scsi, &serial[1]) < 0)
+                        return 1;
+
+        i = 4; /* offset to the start of the identifier */
+        s = j = strlen(serial);
+        if ((page_83[0] & 0x0f) == SCSI_ID_ASCII) {
+                /*
+                 * ASCII descriptor.
+                 */
+                while (i < (4 + page_83[3]))
+                        serial[j++] = page_83[i++];
+        } else {
+                /*
+                 * Binary descriptor, convert to ASCII, using two bytes of
+                 * ASCII for each byte in the page_83.
+                 */
+                while (i < (4 + page_83[3])) {
+                        serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4];
+                        serial[j++] = hex_str[page_83[i] & 0x0f];
+                        i++;
+                }
+        }
+
+        strcpy(serial_short, &serial[s]);
+
+        if (id_search->id_type == SCSI_ID_NAA && wwn != NULL) {
+                strncpy(wwn, &serial[s], 16);
+                if (wwn_vendor_extension != NULL)
+                        strncpy(wwn_vendor_extension, &serial[s + 16], 16);
+        }
+
+        return 0;
+}
+
+/* Extract the raw binary from VPD 0x83 pre-SPC devices */
+static int check_fill_0x83_prespc3(struct scsi_id_device *dev_scsi,
+                                   unsigned char *page_83,
+                                   const struct scsi_id_search_values
+                                   *id_search, char *serial, char *serial_short, int max_len) {
+        int i, j;
+
+        serial[0] = hex_str[SCSI_ID_NAA];
+        /* serial has been memset to zero before */
+        j = strlen(serial);        /* j = 1; */
+
+        for (i = 0; (i < page_83[3]) && (j < max_len-3); ++i) {
+                serial[j++] = hex_str[(page_83[4+i] & 0xf0) >> 4];
+                serial[j++] = hex_str[ page_83[4+i] & 0x0f];
+        }
+        serial[max_len-1] = 0;
+        strncpy(serial_short, serial, max_len-1);
+        return 0;
+}
+
+/* Get device identification VPD page */
+static int do_scsi_page83_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                                  char *serial, char *serial_short, int len,
+                                  char *unit_serial_number, char *wwn,
+                                  char *wwn_vendor_extension, char *tgpt_group) {
+        int retval;
+        unsigned id_ind, j;
+        unsigned char page_83[SCSI_INQ_BUFF_LEN];
+
+        /* also pick up the page 80 serial number */
+        do_scsi_page80_inquiry(dev_scsi, fd, NULL, unit_serial_number, MAX_SERIAL_LEN);
+
+        memzero(page_83, SCSI_INQ_BUFF_LEN);
+        retval = scsi_inquiry(dev_scsi, fd, 1, PAGE_83, page_83,
+                              SCSI_INQ_BUFF_LEN);
+        if (retval < 0)
+                return 1;
+
+        if (page_83[1] != PAGE_83) {
+                log_debug("%s: Invalid page 0x83", dev_scsi->kernel);
+                return 1;
+        }
+
+        /*
+         * XXX Some devices (IBM 3542) return all spaces for an identifier if
+         * the LUN is not actually configured. This leads to identifiers of
+         * the form: "1            ".
+         */
+
+        /*
+         * Model 4, 5, and (some) model 6 EMC Symmetrix devices return
+         * a page 83 reply according to SCSI-2 format instead of SPC-2/3.
+         *
+         * The SCSI-2 page 83 format returns an IEEE WWN in binary
+         * encoded hexi-decimal in the 16 bytes following the initial
+         * 4-byte page 83 reply header.
+         *
+         * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part
+         * of an Identification descriptor.  The 3rd byte of the first
+         * Identification descriptor is a reserved (BSZ) byte field.
+         *
+         * Reference the 7th byte of the page 83 reply to determine
+         * whether the reply is compliant with SCSI-2 or SPC-2/3
+         * specifications.  A zero value in the 7th byte indicates
+         * an SPC-2/3 conformant reply, (i.e., the reserved field of the
+         * first Identification descriptor).  This byte will be non-zero
+         * for a SCSI-2 conformant page 83 reply from these EMC
+         * Symmetrix models since the 7th byte of the reply corresponds
+         * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is,
+         * 0x006048.
+         */
+
+        if (page_83[6] != 0)
+                return check_fill_0x83_prespc3(dev_scsi, page_83, id_search_list,
+                                               serial, serial_short, len);
+
+        /*
+         * Search for a match in the prioritized id_search_list - since WWN ids
+         * come first we can pick up the WWN in check_fill_0x83_id().
+         */
+        for (id_ind = 0;
+             id_ind < sizeof(id_search_list)/sizeof(id_search_list[0]);
+             id_ind++) {
+                /*
+                 * Examine each descriptor returned. There is normally only
+                 * one or a small number of descriptors.
+                 */
+                for (j = 4; j <= (unsigned)page_83[3] + 3; j += page_83[j + 3] + 4) {
+                        retval = check_fill_0x83_id(dev_scsi, &page_83[j],
+                                                    &id_search_list[id_ind],
+                                                    serial, serial_short, len,
+                                                    wwn, wwn_vendor_extension,
+                                                    tgpt_group);
+                        if (!retval)
+                                return retval;
+                        else if (retval < 0)
+                                return retval;
+                }
+        }
+        return 1;
+}
+
+/*
+ * Get device identification VPD page for older SCSI-2 device which is not
+ * compliant with either SPC-2 or SPC-3 format.
+ *
+ * Return the hard coded error code value 2 if the page 83 reply is not
+ * conformant to the SCSI-2 format.
+ */
+static int do_scsi_page83_prespc3_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                                          char *serial, char *serial_short, int len) {
+        int retval;
+        int i, j;
+        unsigned char page_83[SCSI_INQ_BUFF_LEN];
+
+        memzero(page_83, SCSI_INQ_BUFF_LEN);
+        retval = scsi_inquiry(dev_scsi, fd, 1, PAGE_83, page_83, SCSI_INQ_BUFF_LEN);
+        if (retval < 0)
+                return 1;
+
+        if (page_83[1] != PAGE_83) {
+                log_debug("%s: Invalid page 0x83", dev_scsi->kernel);
+                return 1;
+        }
+        /*
+         * Model 4, 5, and (some) model 6 EMC Symmetrix devices return
+         * a page 83 reply according to SCSI-2 format instead of SPC-2/3.
+         *
+         * The SCSI-2 page 83 format returns an IEEE WWN in binary
+         * encoded hexi-decimal in the 16 bytes following the initial
+         * 4-byte page 83 reply header.
+         *
+         * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part
+         * of an Identification descriptor.  The 3rd byte of the first
+         * Identification descriptor is a reserved (BSZ) byte field.
+         *
+         * Reference the 7th byte of the page 83 reply to determine
+         * whether the reply is compliant with SCSI-2 or SPC-2/3
+         * specifications.  A zero value in the 7th byte indicates
+         * an SPC-2/3 conformant reply, (i.e., the reserved field of the
+         * first Identification descriptor).  This byte will be non-zero
+         * for a SCSI-2 conformant page 83 reply from these EMC
+         * Symmetrix models since the 7th byte of the reply corresponds
+         * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is,
+         * 0x006048.
+         */
+        if (page_83[6] == 0)
+                return 2;
+
+        serial[0] = hex_str[SCSI_ID_NAA];
+        /*
+         * The first four bytes contain data, not a descriptor.
+         */
+        i = 4;
+        j = strlen(serial);
+        /*
+         * Binary descriptor, convert to ASCII,
+         * using two bytes of ASCII for each byte
+         * in the page_83.
+         */
+        while (i < (page_83[3]+4)) {
+                serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4];
+                serial[j++] = hex_str[page_83[i] & 0x0f];
+                i++;
+        }
+        return 0;
+}
+
+/* Get unit serial number VPD page */
+static int do_scsi_page80_inquiry(struct scsi_id_device *dev_scsi, int fd,
+                                  char *serial, char *serial_short, int max_len) {
+        int retval;
+        int ser_ind;
+        int i;
+        int len;
+        unsigned char buf[SCSI_INQ_BUFF_LEN];
+
+        memzero(buf, SCSI_INQ_BUFF_LEN);
+        retval = scsi_inquiry(dev_scsi, fd, 1, PAGE_80, buf, SCSI_INQ_BUFF_LEN);
+        if (retval < 0)
+                return retval;
+
+        if (buf[1] != PAGE_80) {
+                log_debug("%s: Invalid page 0x80", dev_scsi->kernel);
+                return 1;
+        }
+
+        len = 1 + VENDOR_LENGTH + MODEL_LENGTH + buf[3];
+        if (max_len < len) {
+                log_debug("%s: length %d too short - need %d",
+                          dev_scsi->kernel, max_len, len);
+                return 1;
+        }
+        /*
+         * Prepend 'S' to avoid unlikely collision with page 0x83 vendor
+         * specific type where we prepend '0' + vendor + model.
+         */
+        len = buf[3];
+        if (serial != NULL) {
+                serial[0] = 'S';
+                ser_ind = prepend_vendor_model(dev_scsi, &serial[1]);
+                if (ser_ind < 0)
+                        return 1;
+                ser_ind++; /* for the leading 'S' */
+                for (i = 4; i < len + 4; i++, ser_ind++)
+                        serial[ser_ind] = buf[i];
+        }
+        if (serial_short != NULL) {
+                memcpy(serial_short, &buf[4], len);
+                serial_short[len] = '\0';
+        }
+        return 0;
+}
+
+int scsi_std_inquiry(struct scsi_id_device *dev_scsi, const char *devname) {
+        int fd;
+        unsigned char buf[SCSI_INQ_BUFF_LEN];
+        struct stat statbuf;
+        int err = 0;
+
+        fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC);
+        if (fd < 0) {
+                log_debug_errno(errno, "scsi_id: cannot open %s: %m", devname);
+                return 1;
+        }
+
+        if (fstat(fd, &statbuf) < 0) {
+                log_debug_errno(errno, "scsi_id: cannot stat %s: %m", devname);
+                err = 2;
+                goto out;
+        }
+        sprintf(dev_scsi->kernel,"%d:%d", major(statbuf.st_rdev),
+                minor(statbuf.st_rdev));
+
+        memzero(buf, SCSI_INQ_BUFF_LEN);
+        err = scsi_inquiry(dev_scsi, fd, 0, 0, buf, SCSI_INQ_BUFF_LEN);
+        if (err < 0)
+                goto out;
+
+        err = 0;
+        memcpy(dev_scsi->vendor, buf + 8, 8);
+        dev_scsi->vendor[8] = '\0';
+        memcpy(dev_scsi->model, buf + 16, 16);
+        dev_scsi->model[16] = '\0';
+        memcpy(dev_scsi->revision, buf + 32, 4);
+        dev_scsi->revision[4] = '\0';
+        sprintf(dev_scsi->type,"%x", buf[0] & 0x1f);
+
+out:
+        close(fd);
+        return err;
+}
+
+int scsi_get_serial(struct scsi_id_device *dev_scsi, const char *devname,
+                    int page_code, int len) {
+        unsigned char page0[SCSI_INQ_BUFF_LEN];
+        int fd = -1;
+        int cnt;
+        int ind;
+        int retval;
+
+        memzero(dev_scsi->serial, len);
+        initialize_srand();
+        for (cnt = 20; cnt > 0; cnt--) {
+                struct timespec duration;
+
+                fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC);
+                if (fd >= 0 || errno != EBUSY)
+                        break;
+                duration.tv_sec = 0;
+                duration.tv_nsec = (200 * 1000 * 1000) + (rand() % 100 * 1000 * 1000);
+                nanosleep(&duration, NULL);
+        }
+        if (fd < 0)
+                return 1;
+
+        if (page_code == PAGE_80) {
+                if (do_scsi_page80_inquiry(dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len)) {
+                        retval = 1;
+                        goto completed;
+                } else  {
+                        retval = 0;
+                        goto completed;
+                }
+        } else if (page_code == PAGE_83) {
+                if (do_scsi_page83_inquiry(dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+                        retval = 1;
+                        goto completed;
+                } else  {
+                        retval = 0;
+                        goto completed;
+                }
+        } else if (page_code == PAGE_83_PRE_SPC3) {
+                retval = do_scsi_page83_prespc3_inquiry(dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len);
+                if (retval) {
+                        /*
+                         * Fallback to servicing a SPC-2/3 compliant page 83
+                         * inquiry if the page 83 reply format does not
+                         * conform to pre-SPC3 expectations.
+                         */
+                        if (retval == 2) {
+                                if (do_scsi_page83_inquiry(dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+                                        retval = 1;
+                                        goto completed;
+                                } else  {
+                                        retval = 0;
+                                        goto completed;
+                                }
+                        }
+                        else {
+                                retval = 1;
+                                goto completed;
+                        }
+                } else  {
+                        retval = 0;
+                        goto completed;
+                }
+        } else if (page_code != 0x00) {
+                log_debug("%s: unsupported page code 0x%d", dev_scsi->kernel, page_code);
+                retval = 1;
+                goto completed;
+        }
+
+        /*
+         * Get page 0, the page of the pages. By default, try from best to
+         * worst of supported pages: 0x83 then 0x80.
+         */
+        if (do_scsi_page0_inquiry(dev_scsi, fd, page0, SCSI_INQ_BUFF_LEN)) {
+                /*
+                 * Don't try anything else. Black list if a specific page
+                 * should be used for this vendor+model, or maybe have an
+                 * optional fall-back to page 0x80 or page 0x83.
+                 */
+                retval = 1;
+                goto completed;
+        }
+
+        for (ind = 4; ind <= page0[3] + 3; ind++)
+                if (page0[ind] == PAGE_83)
+                        if (!do_scsi_page83_inquiry(dev_scsi, fd,
+                                                    dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+                                /*
+                                 * Success
+                                 */
+                                retval = 0;
+                                goto completed;
+                        }
+
+        for (ind = 4; ind <= page0[3] + 3; ind++)
+                if (page0[ind] == PAGE_80)
+                        if (!do_scsi_page80_inquiry(dev_scsi, fd,
+                                                    dev_scsi->serial, dev_scsi->serial_short, len)) {
+                                /*
+                                 * Success
+                                 */
+                                retval = 0;
+                                goto completed;
+                        }
+        retval = 1;
+
+completed:
+        close(fd);
+        return retval;
+}