diff options
Diffstat (limited to 'misc-utils/lsblk.8')
| -rw-r--r-- | misc-utils/lsblk.8 | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/misc-utils/lsblk.8 b/misc-utils/lsblk.8 new file mode 100644 index 0000000..7cc2788 --- /dev/null +++ b/misc-utils/lsblk.8 @@ -0,0 +1,190 @@ +.TH LSBLK 8 "February 2013" "util-linux" "System Administration" +.SH NAME +lsblk \- list block devices +.SH SYNOPSIS +.B lsblk +[options] +.RI [ device ...] +.SH DESCRIPTION +.B lsblk +lists information about all available or the specified block devices. The +.B lsblk +command reads the +.B sysfs +filesystem and +.B udev db +to gather information. If the udev db is not available or lsblk is compiled without udev support than it +tries to read LABELs, UUIDs and filesystem types from the block device. In this case root permissions +are necessary. +.PP +The command prints all block devices (except RAM disks) in a tree-like format +by default. Use +.B "lsblk --help" +to get a list of all available columns. +.PP +The default output, as well as the default output from options like +.B \-\-fs +and +.BR \-\-topology , +is subject to change. So whenever possible, you should avoid using default +outputs in your scripts. Always explicitly define expected columns by using +.B \-\-output +.I columns-list +in environments where a stable output is required. +.PP +Note that +.B lsblk +might be executed in time when +.B udev +does not have all information about recently added or modified devices yet. In this +case it is recommended to use +.B "udevadm settle" +before lsblk to synchronize with udev. +.SH OPTIONS +.TP +.BR \-a , " \-\-all" +Also list empty devices and RAM disk devices. +.TP +.BR \-b , " \-\-bytes" +Print the SIZE column in bytes rather than in a human-readable format. +.TP +.BR \-D , " \-\-discard" +Print information about the discarding capabilities (TRIM, UNMAP) for each device. +.TP +.BR \-z , " \-\-zoned" +Print the zone model for each device. +.TP +.BR \-d , " \-\-nodeps" +Do not print holder devices or slaves. For example, \fBlsblk --nodeps /dev/sda\fR prints +information about the sda device only. +.TP +.BR \-e , " \-\-exclude " \fIlist\fP +Exclude the devices specified by the comma-separated \fIlist\fR of major device numbers. +Note that RAM disks (major=1) are excluded by default if \fB\-\-all\fR is no specified. +The filter is applied to the top-level devices only. This maybe be confusing for +\fB\-\-list\fR output format where hierarchy of the devices is not obvious. +.TP +.BR \-f , " \-\-fs" +Output info about filesystems. This option is equivalent to +.BR -o\ NAME,FSTYPE,LABEL,UUID,MOUNTPOINT . +The authoritative information about filesystems and raids is provided by the +.BR blkid (8) +command. +.TP +.BR \-h , " \-\-help" +Display help text and exit. +.TP +.BR \-I , " \-\-include " \fIlist\fP +Include devices specified by the comma-separated \fIlist\fR of major device numbers. +The filter is applied to the top-level devices only. This maybe be confusing for +\fB\-\-list\fR output format where hierarchy of the devices is not obvious. +.TP +.BR \-i , " \-\-ascii" +Use ASCII characters for tree formatting. +.TP +.BR \-J , " \-\-json" +Use JSON output format. +.TP +.BR \-l , " \-\-list" +Produce output in the form of a list. +.TP +.BR \-m , " \-\-perms" +Output info about device owner, group and mode. This option is equivalent to +.BR -o\ NAME,SIZE,OWNER,GROUP,MODE . +.TP +.BR \-n , " \-\-noheadings" +Do not print a header line. +.TP +.BR \-o , " \-\-output " \fIlist\fP +Specify which output columns to print. Use +.B \-\-help +to get a list of all supported columns. + +The default list of columns may be extended if \fIlist\fP is +specified in the format \fI+list\fP (e.g. \fBlsblk -o +UUID\fP). +.TP +.BR \-O , " \-\-output\-all " +Output all available columns. +.TP +.BR \-P , " \-\-pairs" +Produce output in the form of key="value" pairs. +All potentially unsafe characters are hex-escaped (\\x<code>). +.TP +.BR \-p , " \-\-paths" +Print full device paths. +.TP +.BR \-r , " \-\-raw" +Produce output in raw format. All potentially unsafe characters are hex-escaped +(\\x<code>) in the NAME, KNAME, LABEL, PARTLABEL and MOUNTPOINT columns. +.TP +.BR \-S , " \-\-scsi" +Output info about SCSI devices only. All partitions, slaves and holder devices are ignored. +.TP +.BR \-s , " \-\-inverse" +Print dependencies in inverse order. If the \fB\-\-list\fR output is requested then +the lines are still ordered by dependencies. +.TP +.BR \-t , " \-\-topology" +Output info about block-device topology. +This option is equivalent to +.BR -o\ NAME,ALIGNMENT,MIN-IO,OPT-IO,PHY-SEC,LOG-SEC,ROTA,SCHED,RQ-SIZE,RA,WSAME . +.TP +.BR \-V , " \-\-version" +Display version information and exit. +.TP +.BR \-x , " \-\-sort " \fIcolumn\fP +Sort output lines by \fIcolumn\fP. This option enables \fB\-\-list\fR output format by default. +It is possible to use the option \fI\-\-tree\fP to force tree-like output and +than the tree branches are sorted by the \fIcolumn\fP. +.TP +.BR " \-\-sysroot " \fIdirectory\fP +Gather data for a Linux instance other than the instance from which the lsblk +command is issued. The specified directory is the system root of the Linux +instance to be inspected. This option is designed for the testing purpose. + +.SH NOTES +For partitions, some information (e.g. queue attributes) is inherited from the +parent device. +.PP +The +.B lsblk +command needs to be able to look up each block device by major:minor numbers, +which is done by using +.IR /sys/dev/block . +This sysfs block directory appeared in kernel 2.6.27 (October 2008). +In case of problems with a new enough kernel, check that CONFIG_SYSFS +was enabled at the time of the kernel build. + +.SH RETURN CODES +.IP 0 +success +.IP 1 +failure +.IP 32 +none of specified devices found +.IP 64 +some specified devices found, some not found + +.SH AUTHORS +.nf +Milan Broz <mbroz@redhat.com> +Karel Zak <kzak@redhat.com> +.fi +.SH ENVIRONMENT +.IP LSBLK_DEBUG=all +enables lsblk debug output. +.IP LIBBLKID_DEBUG=all +enables libblkid debug output. +.IP LIBMOUNT_DEBUG=all +enables libmount debug output. +.IP LIBSMARTCOLS_DEBUG=all +enables libsmartcols debug output. +.IP LIBSMARTCOLS_DEBUG_PADDING=on +use visible padding characters. Requires enabled LIBSMARTCOLS_DEBUG. +.SH SEE ALSO +.BR ls (1), +.BR blkid (8), +.BR findmnt (8) +.SH AVAILABILITY +The lsblk command is part of the util-linux package and is available from +https://www.kernel.org/pub/linux/utils/util-linux/. |