From 8cb83eee5a58b1fad74c34094ce3afb9e430b5a4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 04:42:50 +0200 Subject: Adding upstream version 2.33.1. Signed-off-by: Daniel Baumann --- sys-utils/eject.1 | 187 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 sys-utils/eject.1 (limited to 'sys-utils/eject.1') diff --git a/sys-utils/eject.1 b/sys-utils/eject.1 new file mode 100644 index 0000000..f901b23 --- /dev/null +++ b/sys-utils/eject.1 @@ -0,0 +1,187 @@ +.\" Copyright (C) 1994-2005 Jeff Tranter (tranter@pobox.com) +.\" Copyright (C) 2012 Karel Zak +.\" +.\" It may be distributed under the GNU Public License, version 2, or +.\" any higher version. See section COPYING of the GNU Public license +.\" for conditions under which this file may be redistributed. +.TH EJECT 1 "April 2012" "Linux" "User Commands" +.SH NAME +eject \- eject removable media +.SH SYNOPSIS +.B eject +[options] +.IR device | mountpoint +.SH DESCRIPTION +.B eject +allows removable media (typically a CD-ROM, floppy disk, tape, JAZ, ZIP or USB +disk) to be ejected under software control. The command can also control some +multi-disc CD-ROM changers, the auto-eject feature supported by some devices, +and close the disc tray of some CD-ROM drives. +.PP +The device corresponding to \fIdevice\fP or \fImountpoint\fP is ejected. If no +name is specified, the default name \fB/dev/cdrom\fR is used. The device may be +addressed by device name (e.g. 'sda'), device path (e.g. '/dev/sda'), +UUID=\fIuuid\fR or LABEL=\fIlabel\fR tags. +.PP +There are four different methods of ejecting, depending on whether the device +is a CD-ROM, SCSI device, removable floppy, or tape. By default \fBeject\fR tries +all four methods in order until it succeeds. +.PP +If a device partition is specified, the whole-disk device is used. If the device +or a device partition is currently mounted, it is unmounted before ejecting. +.SH OPTIONS +.TP +.BR \-a , " \-\-auto on" | off +This option controls the auto-eject mode, supported by some devices. When +enabled, the drive automatically ejects when the device is closed. +.TP +.BR \-c , " \-\-changerslot " \fIslot +With this option a CD slot can be selected from an ATAPI/IDE CD-ROM changer. +The CD-ROM drive cannot be in use (mounted data CD or playing a music CD) for +a change request to work. Please also note that the first slot of the changer +is referred to as 0, not 1. +.TP +.BR \-d , " \-\-default" +List the default device name. +.TP +.BR \-F , " \-\-force" +Force eject, don't check device type. +.TP +.BR \-f , " \-\-floppy" +This option specifies that the drive should be ejected using a removable floppy +disk eject command. +.TP +.BR \-h , " \-\-help" +Display help text and exit. +.TP +.BR \-i , " \-\-manualeject on" | off +This option controls locking of the hardware eject button. When enabled, the +drive will not be ejected when the button is pressed. This is useful when you +are carrying a laptop in a bag or case and don't want it to eject if the button +is inadvertently pressed. +.TP +.BR \-M , " \-\-no\-partitions\-unmount" +The option tells eject to not try to unmount other partitions on partitioned +devices. If another partition is still mounted, the program will not attempt +to eject the media. It will attempt to unmount only the device or mountpoint +given on the command line. +.TP +.BR \-m , " \-\-no\-unmount" +The option tells eject to not try to unmount at all. +.TP +.BR \-n , " \-\-noop" +With this option the selected device is displayed but no action is performed. +.TP +.BR \-p , " \-\-proc" +This option allows you to use /proc/mounts instead /etc/mtab. It also passes the +\fB\-n\fR option to \fBumount\fR(8). +.TP +.BR \-q , " \-\-tape" +This option specifies that the drive should be ejected using a tape drive +offline command. +.TP +.BR \-r , " \-\-cdrom" +This option specifies that the drive should be ejected using a CDROM eject +command. +.TP +.BR \-s , " \-\-scsi" +This option specifies that the drive should be ejected using SCSI commands. +.TP +.BR \-T , " \-\-traytoggle" +With this option the drive is given a CD-ROM tray close command if it's opened, +and a CD-ROM tray eject command if it's closed. Not all devices support this +command, because it uses the above CD-ROM tray close command. +.TP +.BR \-t , " \-\-trayclose" +With this option the drive is given a CD-ROM tray close command. Not all +devices support this command. +.TP +.BR \-V , " \-\-version" +Display version information and exit. +.TP +.BR \-v , " \-\-verbose" +Run in verbose mode; more information is displayed about what the command is +doing. +.TP +.BR \-X , " \-\-listspeed" +With this option the CD-ROM drive will be probed to detect the available +speeds. The output is a list of speeds which can be used as an argument of the +\fB\-x\fR option. This only works with Linux 2.6.13 or higher, on previous versions +solely the maximum speed will be reported. Also note that some drives may not +correctly report the speed and therefore this option does not work with them. +.TP +.BR \-x , " \-\-cdspeed " \fIspeed +With this option the drive is given a CD-ROM select speed command. The +.I speed +argument is a number indicating the desired speed (e.g. 8 for 8X speed), or 0 +for maximum data rate. Not all devices support this command and you can only +specify speeds that the drive is capable of. Every time the media is changed +this option is cleared. This option can be used alone, or with the +\fB\-t\fR and \fB\-c\fR options. +.SH EXIT STATUS +Returns 0 if operation was successful, 1 if operation failed or command syntax +was not valid. +.SH NOTES +.B eject +only works with devices that support one or more of the four methods of +ejecting. This includes most CD-ROM drives (IDE, SCSI, and proprietary), some +SCSI tape drives, JAZ drives, ZIP drives (parallel port, SCSI, and IDE +versions), and LS120 removable floppies. Users have also reported success with +floppy drives on Sun SPARC and Apple Macintosh systems. If +.B eject +does not work, it is most likely a limitation of the kernel driver for the +device and not the +.B eject +program itself. +.PP +The \fB\-r\fR, \fB\-s\fR, \fB\-f\fR, and \fB\-q\fR options allow controlling +which methods are used to +eject. More than one method can be specified. If none of these options are +specified, it tries all four (this works fine in most cases). +.PP +.B eject +may not always be able to determine if the device is mounted (e.g. if it has +several names). If the device name is a symbolic link, +.B eject +will follow the link and use the device that it points to. +.PP +If +.B eject +determines that the device can have multiple partitions, it will attempt to +unmount all mounted partitions of the device before ejecting (see also +\fB--no-partitions-unmount\fR). If an unmount fails, the program will not +attempt to eject the media. +.PP +You can eject an audio CD. Some CD-ROM drives will refuse to open the tray if +the drive is empty. Some devices do not support the tray close command. +.PP +If the auto-eject feature is enabled, then the drive will always be ejected +after running this command. Not all Linux kernel CD-ROM drivers support the +auto-eject mode. There is no way to find out the state of the auto-eject mode. +.PP +You need appropriate privileges to access the device files. Running as root is +required to eject some devices (e.g. SCSI devices). +.SH AUTHORS +.MT tranter@\:pobox.com +Jeff Tranter +.ME +- original author. +.br +.MT kzak@\:redhat.com +Karel Zak +.ME +and +.MT mluscon@\:redhat.com +Michal Luscon +.ME +- util-linux version. +.SH SEE ALSO +.BR findmnt (8), +.BR lsblk (8), +.BR mount (8), +.BR umount (8) +.SH AVAILABILITY +The eject command is part of the util-linux package and is available from +.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/ +Linux Kernel Archive +.UE . -- cgit v1.2.3