diff options
Diffstat (limited to '')
| -rw-r--r-- | src/fileio.c | 7872 |
1 files changed, 7872 insertions, 0 deletions
diff --git a/src/fileio.c b/src/fileio.c new file mode 100644 index 0000000..bf724f6 --- /dev/null +++ b/src/fileio.c @@ -0,0 +1,7872 @@ +/* vi:set ts=8 sts=4 sw=4 noet: + * + * VIM - Vi IMproved by Bram Moolenaar + * + * Do ":help uganda" in Vim to read copying and usage conditions. + * Do ":help credits" in Vim to see a list of people who contributed. + * See README.txt for an overview of the Vim source code. + */ + +/* + * fileio.c: read from and write to a file + */ + +#include "vim.h" + +#if defined(__TANDEM) || defined(__MINT__) +# include <limits.h> /* for SSIZE_MAX */ +#endif + +#if defined(HAVE_UTIME) && defined(HAVE_UTIME_H) +# include <utime.h> /* for struct utimbuf */ +#endif + +#define BUFSIZE 8192 /* size of normal write buffer */ +#define SMBUFSIZE 256 /* size of emergency write buffer */ + +/* Is there any system that doesn't have access()? */ +#define USE_MCH_ACCESS + +static char_u *next_fenc(char_u **pp); +#ifdef FEAT_EVAL +static char_u *readfile_charconvert(char_u *fname, char_u *fenc, int *fdp); +#endif +#ifdef FEAT_VIMINFO +static void check_marks_read(void); +#endif +#ifdef FEAT_CRYPT +static char_u *check_for_cryptkey(char_u *cryptkey, char_u *ptr, long *sizep, off_T *filesizep, int newfile, char_u *fname, int *did_ask); +#endif +static int set_rw_fname(char_u *fname, char_u *sfname); +static int msg_add_fileformat(int eol_type); +static void msg_add_eol(void); +static int check_mtime(buf_T *buf, stat_T *s); +static int time_differs(long t1, long t2); + +#define HAS_BW_FLAGS +#define FIO_LATIN1 0x01 /* convert Latin1 */ +#define FIO_UTF8 0x02 /* convert UTF-8 */ +#define FIO_UCS2 0x04 /* convert UCS-2 */ +#define FIO_UCS4 0x08 /* convert UCS-4 */ +#define FIO_UTF16 0x10 /* convert UTF-16 */ +#ifdef WIN3264 +# define FIO_CODEPAGE 0x20 /* convert MS-Windows codepage */ +# define FIO_PUT_CP(x) (((x) & 0xffff) << 16) /* put codepage in top word */ +# define FIO_GET_CP(x) (((x)>>16) & 0xffff) /* get codepage from top word */ +#endif +#ifdef MACOS_CONVERT +# define FIO_MACROMAN 0x20 /* convert MacRoman */ +#endif +#define FIO_ENDIAN_L 0x80 /* little endian */ +#define FIO_ENCRYPTED 0x1000 /* encrypt written bytes */ +#define FIO_NOCONVERT 0x2000 /* skip encoding conversion */ +#define FIO_UCSBOM 0x4000 /* check for BOM at start of file */ +#define FIO_ALL -1 /* allow all formats */ + +/* When converting, a read() or write() may leave some bytes to be converted + * for the next call. The value is guessed... */ +#define CONV_RESTLEN 30 + +/* We have to guess how much a sequence of bytes may expand when converting + * with iconv() to be able to allocate a buffer. */ +#define ICONV_MULT 8 + +/* + * Structure to pass arguments from buf_write() to buf_write_bytes(). + */ +struct bw_info +{ + int bw_fd; /* file descriptor */ + char_u *bw_buf; /* buffer with data to be written */ + int bw_len; /* length of data */ +#ifdef HAS_BW_FLAGS + int bw_flags; /* FIO_ flags */ +#endif +#ifdef FEAT_CRYPT + buf_T *bw_buffer; /* buffer being written */ +#endif + char_u bw_rest[CONV_RESTLEN]; /* not converted bytes */ + int bw_restlen; /* nr of bytes in bw_rest[] */ + int bw_first; /* first write call */ + char_u *bw_conv_buf; /* buffer for writing converted chars */ + int bw_conv_buflen; /* size of bw_conv_buf */ + int bw_conv_error; /* set for conversion error */ + linenr_T bw_conv_error_lnum; /* first line with error or zero */ + linenr_T bw_start_lnum; /* line number at start of buffer */ +#ifdef USE_ICONV + iconv_t bw_iconv_fd; /* descriptor for iconv() or -1 */ +#endif +}; + +static int buf_write_bytes(struct bw_info *ip); + +static linenr_T readfile_linenr(linenr_T linecnt, char_u *p, char_u *endp); +static int ucs2bytes(unsigned c, char_u **pp, int flags); +static int need_conversion(char_u *fenc); +static int get_fio_flags(char_u *ptr); +static char_u *check_for_bom(char_u *p, long size, int *lenp, int flags); +static int make_bom(char_u *buf, char_u *name); +#ifdef WIN3264 +static int get_win_fio_flags(char_u *ptr); +#endif +#ifdef MACOS_CONVERT +static int get_mac_fio_flags(char_u *ptr); +#endif +static char *e_auchangedbuf = N_("E812: Autocommands changed buffer or buffer name"); + + void +filemess( + buf_T *buf, + char_u *name, + char_u *s, + int attr) +{ + int msg_scroll_save; + + if (msg_silent != 0) + return; + msg_add_fname(buf, name); /* put file name in IObuff with quotes */ + /* If it's extremely long, truncate it. */ + if (STRLEN(IObuff) > IOSIZE - 80) + IObuff[IOSIZE - 80] = NUL; + STRCAT(IObuff, s); + /* + * For the first message may have to start a new line. + * For further ones overwrite the previous one, reset msg_scroll before + * calling filemess(). + */ + msg_scroll_save = msg_scroll; + if (shortmess(SHM_OVERALL) && !exiting && p_verbose == 0) + msg_scroll = FALSE; + if (!msg_scroll) /* wait a bit when overwriting an error msg */ + check_for_delay(FALSE); + msg_start(); + msg_scroll = msg_scroll_save; + msg_scrolled_ign = TRUE; + /* may truncate the message to avoid a hit-return prompt */ + msg_outtrans_attr(msg_may_trunc(FALSE, IObuff), attr); + msg_clr_eos(); + out_flush(); + msg_scrolled_ign = FALSE; +} + +/* + * Read lines from file "fname" into the buffer after line "from". + * + * 1. We allocate blocks with lalloc, as big as possible. + * 2. Each block is filled with characters from the file with a single read(). + * 3. The lines are inserted in the buffer with ml_append(). + * + * (caller must check that fname != NULL, unless READ_STDIN is used) + * + * "lines_to_skip" is the number of lines that must be skipped + * "lines_to_read" is the number of lines that are appended + * When not recovering lines_to_skip is 0 and lines_to_read MAXLNUM. + * + * flags: + * READ_NEW starting to edit a new buffer + * READ_FILTER reading filter output + * READ_STDIN read from stdin instead of a file + * READ_BUFFER read from curbuf instead of a file (converting after reading + * stdin) + * READ_DUMMY read into a dummy buffer (to check if file contents changed) + * READ_KEEP_UNDO don't clear undo info or read it from a file + * READ_FIFO read from fifo/socket instead of a file + * + * return FAIL for failure, NOTDONE for directory (failure), or OK + */ + int +readfile( + char_u *fname, + char_u *sfname, + linenr_T from, + linenr_T lines_to_skip, + linenr_T lines_to_read, + exarg_T *eap, /* can be NULL! */ + int flags) +{ + int fd = 0; + int newfile = (flags & READ_NEW); + int check_readonly; + int filtering = (flags & READ_FILTER); + int read_stdin = (flags & READ_STDIN); + int read_buffer = (flags & READ_BUFFER); + int read_fifo = (flags & READ_FIFO); + int set_options = newfile || read_buffer + || (eap != NULL && eap->read_edit); + linenr_T read_buf_lnum = 1; /* next line to read from curbuf */ + colnr_T read_buf_col = 0; /* next char to read from this line */ + char_u c; + linenr_T lnum = from; + char_u *ptr = NULL; /* pointer into read buffer */ + char_u *buffer = NULL; /* read buffer */ + char_u *new_buffer = NULL; /* init to shut up gcc */ + char_u *line_start = NULL; /* init to shut up gcc */ + int wasempty; /* buffer was empty before reading */ + colnr_T len; + long size = 0; + char_u *p; + off_T filesize = 0; + int skip_read = FALSE; +#ifdef FEAT_CRYPT + char_u *cryptkey = NULL; + int did_ask_for_key = FALSE; +#endif +#ifdef FEAT_PERSISTENT_UNDO + context_sha256_T sha_ctx; + int read_undo_file = FALSE; +#endif + int split = 0; /* number of split lines */ +#define UNKNOWN 0x0fffffff /* file size is unknown */ + linenr_T linecnt; + int error = FALSE; /* errors encountered */ + int ff_error = EOL_UNKNOWN; /* file format with errors */ + long linerest = 0; /* remaining chars in line */ +#ifdef UNIX + int perm = 0; + int swap_mode = -1; /* protection bits for swap file */ +#else + int perm; +#endif + int fileformat = 0; /* end-of-line format */ + int keep_fileformat = FALSE; + stat_T st; + int file_readonly; + linenr_T skip_count = 0; + linenr_T read_count = 0; + int msg_save = msg_scroll; + linenr_T read_no_eol_lnum = 0; /* non-zero lnum when last line of + * last read was missing the eol */ + int try_mac; + int try_dos; + int try_unix; + int file_rewind = FALSE; + int can_retry; + linenr_T conv_error = 0; /* line nr with conversion error */ + linenr_T illegal_byte = 0; /* line nr with illegal byte */ + int keep_dest_enc = FALSE; /* don't retry when char doesn't fit + in destination encoding */ + int bad_char_behavior = BAD_REPLACE; + /* BAD_KEEP, BAD_DROP or character to + * replace with */ + char_u *tmpname = NULL; /* name of 'charconvert' output file */ + int fio_flags = 0; + char_u *fenc; /* fileencoding to use */ + int fenc_alloced; /* fenc_next is in allocated memory */ + char_u *fenc_next = NULL; /* next item in 'fencs' or NULL */ + int advance_fenc = FALSE; + long real_size = 0; +#ifdef USE_ICONV + iconv_t iconv_fd = (iconv_t)-1; /* descriptor for iconv() or -1 */ +# ifdef FEAT_EVAL + int did_iconv = FALSE; /* TRUE when iconv() failed and trying + 'charconvert' next */ +# endif +#endif + int converted = FALSE; /* TRUE if conversion done */ + int notconverted = FALSE; /* TRUE if conversion wanted but it + wasn't possible */ + char_u conv_rest[CONV_RESTLEN]; + int conv_restlen = 0; /* nr of bytes in conv_rest[] */ + buf_T *old_curbuf; + char_u *old_b_ffname; + char_u *old_b_fname; + int using_b_ffname; + int using_b_fname; + + au_did_filetype = FALSE; /* reset before triggering any autocommands */ + + curbuf->b_no_eol_lnum = 0; /* in case it was set by the previous read */ + + /* + * If there is no file name yet, use the one for the read file. + * BF_NOTEDITED is set to reflect this. + * Don't do this for a read from a filter. + * Only do this when 'cpoptions' contains the 'f' flag. + */ + if (curbuf->b_ffname == NULL + && !filtering + && fname != NULL + && vim_strchr(p_cpo, CPO_FNAMER) != NULL + && !(flags & READ_DUMMY)) + { + if (set_rw_fname(fname, sfname) == FAIL) + return FAIL; + } + + /* Remember the initial values of curbuf, curbuf->b_ffname and + * curbuf->b_fname to detect whether they are altered as a result of + * executing nasty autocommands. Also check if "fname" and "sfname" + * point to one of these values. */ + old_curbuf = curbuf; + old_b_ffname = curbuf->b_ffname; + old_b_fname = curbuf->b_fname; + using_b_ffname = (fname == curbuf->b_ffname) + || (sfname == curbuf->b_ffname); + using_b_fname = (fname == curbuf->b_fname) || (sfname == curbuf->b_fname); + + /* After reading a file the cursor line changes but we don't want to + * display the line. */ + ex_no_reprint = TRUE; + + /* don't display the file info for another buffer now */ + need_fileinfo = FALSE; + + /* + * For Unix: Use the short file name whenever possible. + * Avoids problems with networks and when directory names are changed. + * Don't do this for MS-DOS, a "cd" in a sub-shell may have moved us to + * another directory, which we don't detect. + */ + if (sfname == NULL) + sfname = fname; +#if defined(UNIX) + fname = sfname; +#endif + + /* + * The BufReadCmd and FileReadCmd events intercept the reading process by + * executing the associated commands instead. + */ + if (!filtering && !read_stdin && !read_buffer) + { + pos_T pos; + + pos = curbuf->b_op_start; + + /* Set '[ mark to the line above where the lines go (line 1 if zero). */ + curbuf->b_op_start.lnum = ((from == 0) ? 1 : from); + curbuf->b_op_start.col = 0; + + if (newfile) + { + if (apply_autocmds_exarg(EVENT_BUFREADCMD, NULL, sfname, + FALSE, curbuf, eap)) +#ifdef FEAT_EVAL + return aborting() ? FAIL : OK; +#else + return OK; +#endif + } + else if (apply_autocmds_exarg(EVENT_FILEREADCMD, sfname, sfname, + FALSE, NULL, eap)) +#ifdef FEAT_EVAL + return aborting() ? FAIL : OK; +#else + return OK; +#endif + + curbuf->b_op_start = pos; + } + + if ((shortmess(SHM_OVER) || curbuf->b_help) && p_verbose == 0) + msg_scroll = FALSE; /* overwrite previous file message */ + else + msg_scroll = TRUE; /* don't overwrite previous file message */ + + /* + * If the name ends in a path separator, we can't open it. Check here, + * because reading the file may actually work, but then creating the swap + * file may destroy it! Reported on MS-DOS and Win 95. + * If the name is too long we might crash further on, quit here. + */ + if (fname != NULL && *fname != NUL) + { + p = fname + STRLEN(fname); + if (after_pathsep(fname, p) || STRLEN(fname) >= MAXPATHL) + { + filemess(curbuf, fname, (char_u *)_("Illegal file name"), 0); + msg_end(); + msg_scroll = msg_save; + return FAIL; + } + } + + if (!read_stdin && !read_buffer && !read_fifo) + { +#ifdef UNIX + /* + * On Unix it is possible to read a directory, so we have to + * check for it before the mch_open(). + */ + perm = mch_getperm(fname); + if (perm >= 0 && !S_ISREG(perm) /* not a regular file ... */ + && !S_ISFIFO(perm) /* ... or fifo */ + && !S_ISSOCK(perm) /* ... or socket */ +# ifdef OPEN_CHR_FILES + && !(S_ISCHR(perm) && is_dev_fd_file(fname)) + /* ... or a character special file named /dev/fd/<n> */ +# endif + ) + { + int retval = FAIL; + + if (S_ISDIR(perm)) + { + filemess(curbuf, fname, (char_u *)_("is a directory"), 0); + retval = NOTDONE; + } + else + filemess(curbuf, fname, (char_u *)_("is not a file"), 0); + msg_end(); + msg_scroll = msg_save; + return retval; + } +#endif +#if defined(MSWIN) + /* + * MS-Windows allows opening a device, but we will probably get stuck + * trying to read it. + */ + if (!p_odev && mch_nodetype(fname) == NODE_WRITABLE) + { + filemess(curbuf, fname, (char_u *)_("is a device (disabled with 'opendevice' option)"), 0); + msg_end(); + msg_scroll = msg_save; + return FAIL; + } +#endif + } + + /* Set default or forced 'fileformat' and 'binary'. */ + set_file_options(set_options, eap); + + /* + * When opening a new file we take the readonly flag from the file. + * Default is r/w, can be set to r/o below. + * Don't reset it when in readonly mode + * Only set/reset b_p_ro when BF_CHECK_RO is set. + */ + check_readonly = (newfile && (curbuf->b_flags & BF_CHECK_RO)); + if (check_readonly && !readonlymode) + curbuf->b_p_ro = FALSE; + + if (newfile && !read_stdin && !read_buffer && !read_fifo) + { + /* Remember time of file. */ + if (mch_stat((char *)fname, &st) >= 0) + { + buf_store_time(curbuf, &st, fname); + curbuf->b_mtime_read = curbuf->b_mtime; +#ifdef UNIX + /* + * Use the protection bits of the original file for the swap file. + * This makes it possible for others to read the name of the + * edited file from the swapfile, but only if they can read the + * edited file. + * Remove the "write" and "execute" bits for group and others + * (they must not write the swapfile). + * Add the "read" and "write" bits for the user, otherwise we may + * not be able to write to the file ourselves. + * Setting the bits is done below, after creating the swap file. + */ + swap_mode = (st.st_mode & 0644) | 0600; +#endif +#ifdef FEAT_CW_EDITOR + /* Get the FSSpec on MacOS + * TODO: Update it properly when the buffer name changes + */ + (void)GetFSSpecFromPath(curbuf->b_ffname, &curbuf->b_FSSpec); +#endif +#ifdef VMS + curbuf->b_fab_rfm = st.st_fab_rfm; + curbuf->b_fab_rat = st.st_fab_rat; + curbuf->b_fab_mrs = st.st_fab_mrs; +#endif + } + else + { + curbuf->b_mtime = 0; + curbuf->b_mtime_read = 0; + curbuf->b_orig_size = 0; + curbuf->b_orig_mode = 0; + } + + /* Reset the "new file" flag. It will be set again below when the + * file doesn't exist. */ + curbuf->b_flags &= ~(BF_NEW | BF_NEW_W); + } + +/* + * for UNIX: check readonly with perm and mch_access() + * for Amiga: check readonly by trying to open the file for writing + */ + file_readonly = FALSE; + if (read_stdin) + { +#if defined(MSWIN) + /* Force binary I/O on stdin to avoid CR-LF -> LF conversion. */ + setmode(0, O_BINARY); +#endif + } + else if (!read_buffer) + { +#ifdef USE_MCH_ACCESS + if ( +# ifdef UNIX + !(perm & 0222) || +# endif + mch_access((char *)fname, W_OK)) + file_readonly = TRUE; + fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0); +#else + if (!newfile + || readonlymode + || (fd = mch_open((char *)fname, O_RDWR | O_EXTRA, 0)) < 0) + { + file_readonly = TRUE; + /* try to open ro */ + fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0); + } +#endif + } + + if (fd < 0) /* cannot open at all */ + { +#ifndef UNIX + int isdir_f; +#endif + msg_scroll = msg_save; +#ifndef UNIX + /* + * On Amiga we can't open a directory, check here. + */ + isdir_f = (mch_isdir(fname)); + perm = mch_getperm(fname); /* check if the file exists */ + if (isdir_f) + { + filemess(curbuf, sfname, (char_u *)_("is a directory"), 0); + curbuf->b_p_ro = TRUE; /* must use "w!" now */ + } + else +#endif + if (newfile) + { + if (perm < 0 +#ifdef ENOENT + && errno == ENOENT +#endif + ) + { + /* + * Set the 'new-file' flag, so that when the file has + * been created by someone else, a ":w" will complain. + */ + curbuf->b_flags |= BF_NEW; + + /* Create a swap file now, so that other Vims are warned + * that we are editing this file. Don't do this for a + * "nofile" or "nowrite" buffer type. */ +#ifdef FEAT_QUICKFIX + if (!bt_dontwrite(curbuf)) +#endif + { + check_need_swap(newfile); + /* SwapExists autocommand may mess things up */ + if (curbuf != old_curbuf + || (using_b_ffname + && (old_b_ffname != curbuf->b_ffname)) + || (using_b_fname + && (old_b_fname != curbuf->b_fname))) + { + emsg(_(e_auchangedbuf)); + return FAIL; + } + } + if (dir_of_file_exists(fname)) + filemess(curbuf, sfname, (char_u *)_("[New File]"), 0); + else + filemess(curbuf, sfname, + (char_u *)_("[New DIRECTORY]"), 0); +#ifdef FEAT_VIMINFO + /* Even though this is a new file, it might have been + * edited before and deleted. Get the old marks. */ + check_marks_read(); +#endif + /* Set forced 'fileencoding'. */ + if (eap != NULL) + set_forced_fenc(eap); + apply_autocmds_exarg(EVENT_BUFNEWFILE, sfname, sfname, + FALSE, curbuf, eap); + /* remember the current fileformat */ + save_file_ff(curbuf); + +#if defined(FEAT_EVAL) + if (aborting()) /* autocmds may abort script processing */ + return FAIL; +#endif + return OK; /* a new file is not an error */ + } + else + { + filemess(curbuf, sfname, (char_u *)( +# ifdef EFBIG + (errno == EFBIG) ? _("[File too big]") : +# endif +# ifdef EOVERFLOW + (errno == EOVERFLOW) ? _("[File too big]") : +# endif + _("[Permission Denied]")), 0); + curbuf->b_p_ro = TRUE; /* must use "w!" now */ + } + } + + return FAIL; + } + + /* + * Only set the 'ro' flag for readonly files the first time they are + * loaded. Help files always get readonly mode + */ + if ((check_readonly && file_readonly) || curbuf->b_help) + curbuf->b_p_ro = TRUE; + + if (set_options) + { + /* Don't change 'eol' if reading from buffer as it will already be + * correctly set when reading stdin. */ + if (!read_buffer) + { + curbuf->b_p_eol = TRUE; + curbuf->b_start_eol = TRUE; + } + curbuf->b_p_bomb = FALSE; + curbuf->b_start_bomb = FALSE; + } + + /* Create a swap file now, so that other Vims are warned that we are + * editing this file. + * Don't do this for a "nofile" or "nowrite" buffer type. */ +#ifdef FEAT_QUICKFIX + if (!bt_dontwrite(curbuf)) +#endif + { + check_need_swap(newfile); + if (!read_stdin && (curbuf != old_curbuf + || (using_b_ffname && (old_b_ffname != curbuf->b_ffname)) + || (using_b_fname && (old_b_fname != curbuf->b_fname)))) + { + emsg(_(e_auchangedbuf)); + if (!read_buffer) + close(fd); + return FAIL; + } +#ifdef UNIX + /* Set swap file protection bits after creating it. */ + if (swap_mode > 0 && curbuf->b_ml.ml_mfp != NULL + && curbuf->b_ml.ml_mfp->mf_fname != NULL) + { + char_u *swap_fname = curbuf->b_ml.ml_mfp->mf_fname; + + /* + * If the group-read bit is set but not the world-read bit, then + * the group must be equal to the group of the original file. If + * we can't make that happen then reset the group-read bit. This + * avoids making the swap file readable to more users when the + * primary group of the user is too permissive. + */ + if ((swap_mode & 044) == 040) + { + stat_T swap_st; + + if (mch_stat((char *)swap_fname, &swap_st) >= 0 + && st.st_gid != swap_st.st_gid +# ifdef HAVE_FCHOWN + && fchown(curbuf->b_ml.ml_mfp->mf_fd, -1, st.st_gid) + == -1 +# endif + ) + swap_mode &= 0600; + } + + (void)mch_setperm(swap_fname, (long)swap_mode); + } +#endif + } + +#if defined(HAS_SWAP_EXISTS_ACTION) + /* If "Quit" selected at ATTENTION dialog, don't load the file */ + if (swap_exists_action == SEA_QUIT) + { + if (!read_buffer && !read_stdin) + close(fd); + return FAIL; + } +#endif + + ++no_wait_return; /* don't wait for return yet */ + + /* + * Set '[ mark to the line above where the lines go (line 1 if zero). + */ + curbuf->b_op_start.lnum = ((from == 0) ? 1 : from); + curbuf->b_op_start.col = 0; + + try_mac = (vim_strchr(p_ffs, 'm') != NULL); + try_dos = (vim_strchr(p_ffs, 'd') != NULL); + try_unix = (vim_strchr(p_ffs, 'x') != NULL); + + if (!read_buffer) + { + int m = msg_scroll; + int n = msg_scrolled; + + /* + * The file must be closed again, the autocommands may want to change + * the file before reading it. + */ + if (!read_stdin) + close(fd); /* ignore errors */ + + /* + * The output from the autocommands should not overwrite anything and + * should not be overwritten: Set msg_scroll, restore its value if no + * output was done. + */ + msg_scroll = TRUE; + if (filtering) + apply_autocmds_exarg(EVENT_FILTERREADPRE, NULL, sfname, + FALSE, curbuf, eap); + else if (read_stdin) + apply_autocmds_exarg(EVENT_STDINREADPRE, NULL, sfname, + FALSE, curbuf, eap); + else if (newfile) + apply_autocmds_exarg(EVENT_BUFREADPRE, NULL, sfname, + FALSE, curbuf, eap); + else + apply_autocmds_exarg(EVENT_FILEREADPRE, sfname, sfname, + FALSE, NULL, eap); + /* autocommands may have changed it */ + try_mac = (vim_strchr(p_ffs, 'm') != NULL); + try_dos = (vim_strchr(p_ffs, 'd') != NULL); + try_unix = (vim_strchr(p_ffs, 'x') != NULL); + + if (msg_scrolled == n) + msg_scroll = m; + +#ifdef FEAT_EVAL + if (aborting()) /* autocmds may abort script processing */ + { + --no_wait_return; + msg_scroll = msg_save; + curbuf->b_p_ro = TRUE; /* must use "w!" now */ + return FAIL; + } +#endif + /* + * Don't allow the autocommands to change the current buffer. + * Try to re-open the file. + * + * Don't allow the autocommands to change the buffer name either + * (cd for example) if it invalidates fname or sfname. + */ + if (!read_stdin && (curbuf != old_curbuf + || (using_b_ffname && (old_b_ffname != curbuf->b_ffname)) + || (using_b_fname && (old_b_fname != curbuf->b_fname)) + || (fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0)) < 0)) + { + --no_wait_return; + msg_scroll = msg_save; + if (fd < 0) + emsg(_("E200: *ReadPre autocommands made the file unreadable")); + else + emsg(_("E201: *ReadPre autocommands must not change current buffer")); + curbuf->b_p_ro = TRUE; /* must use "w!" now */ + return FAIL; + } + } + + /* Autocommands may add lines to the file, need to check if it is empty */ + wasempty = (curbuf->b_ml.ml_flags & ML_EMPTY); + + if (!recoverymode && !filtering && !(flags & READ_DUMMY)) + { + /* + * Show the user that we are busy reading the input. Sometimes this + * may take a while. When reading from stdin another program may + * still be running, don't move the cursor to the last line, unless + * always using the GUI. + */ + if (read_stdin) + { + if (!is_not_a_term()) + { +#ifndef ALWAYS_USE_GUI + mch_msg(_("Vim: Reading from stdin...\n")); +#endif +#ifdef FEAT_GUI + /* Also write a message in the GUI window, if there is one. */ + if (gui.in_use && !gui.dying && !gui.starting) + { + p = (char_u *)_("Reading from stdin..."); + gui_write(p, (int)STRLEN(p)); + } +#endif + } + } + else if (!read_buffer) + filemess(curbuf, sfname, (char_u *)"", 0); + } + + msg_scroll = FALSE; /* overwrite the file message */ + + /* + * Set linecnt now, before the "retry" caused by a wrong guess for + * fileformat, and after the autocommands, which may change them. + */ + linecnt = curbuf->b_ml.ml_line_count; + + /* "++bad=" argument. */ + if (eap != NULL && eap->bad_char != 0) + { + bad_char_behavior = eap->bad_char; + if (set_options) + curbuf->b_bad_char = eap->bad_char; + } + else + curbuf->b_bad_char = 0; + + /* + * Decide which 'encoding' to use or use first. + */ + if (eap != NULL && eap->force_enc != 0) + { + fenc = enc_canonize(eap->cmd + eap->force_enc); + fenc_alloced = TRUE; + keep_dest_enc = TRUE; + } + else if (curbuf->b_p_bin) + { + fenc = (char_u *)""; /* binary: don't convert */ + fenc_alloced = FALSE; + } + else if (curbuf->b_help) + { + char_u firstline[80]; + int fc; + + /* Help files are either utf-8 or latin1. Try utf-8 first, if this + * fails it must be latin1. + * Always do this when 'encoding' is "utf-8". Otherwise only do + * this when needed to avoid [converted] remarks all the time. + * It is needed when the first line contains non-ASCII characters. + * That is only in *.??x files. */ + fenc = (char_u *)"latin1"; + c = enc_utf8; + if (!c && !read_stdin) + { + fc = fname[STRLEN(fname) - 1]; + if (TOLOWER_ASC(fc) == 'x') + { + /* Read the first line (and a bit more). Immediately rewind to + * the start of the file. If the read() fails "len" is -1. */ + len = read_eintr(fd, firstline, 80); + vim_lseek(fd, (off_T)0L, SEEK_SET); + for (p = firstline; p < firstline + len; ++p) + if (*p >= 0x80) + { + c = TRUE; + break; + } + } + } + + if (c) + { + fenc_next = fenc; + fenc = (char_u *)"utf-8"; + + /* When the file is utf-8 but a character doesn't fit in + * 'encoding' don't retry. In help text editing utf-8 bytes + * doesn't make sense. */ + if (!enc_utf8) + keep_dest_enc = TRUE; + } + fenc_alloced = FALSE; + } + else if (*p_fencs == NUL) + { + fenc = curbuf->b_p_fenc; /* use format from buffer */ + fenc_alloced = FALSE; + } + else + { + fenc_next = p_fencs; /* try items in 'fileencodings' */ + fenc = next_fenc(&fenc_next); + fenc_alloced = TRUE; + } + + /* + * Jump back here to retry reading the file in different ways. + * Reasons to retry: + * - encoding conversion failed: try another one from "fenc_next" + * - BOM detected and fenc was set, need to setup conversion + * - "fileformat" check failed: try another + * + * Variables set for special retry actions: + * "file_rewind" Rewind the file to start reading it again. + * "advance_fenc" Advance "fenc" using "fenc_next". + * "skip_read" Re-use already read bytes (BOM detected). + * "did_iconv" iconv() conversion failed, try 'charconvert'. + * "keep_fileformat" Don't reset "fileformat". + * + * Other status indicators: + * "tmpname" When != NULL did conversion with 'charconvert'. + * Output file has to be deleted afterwards. + * "iconv_fd" When != -1 did conversion with iconv(). + */ +retry: + + if (file_rewind) + { + if (read_buffer) + { + read_buf_lnum = 1; + read_buf_col = 0; + } + else if (read_stdin || vim_lseek(fd, (off_T)0L, SEEK_SET) != 0) + { + /* Can't rewind the file, give up. */ + error = TRUE; + goto failed; + } + /* Delete the previously read lines. */ + while (lnum > from) + ml_delete(lnum--, FALSE); + file_rewind = FALSE; + if (set_options) + { + curbuf->b_p_bomb = FALSE; + curbuf->b_start_bomb = FALSE; + } + conv_error = 0; + } + + /* + * When retrying with another "fenc" and the first time "fileformat" + * will be reset. + */ + if (keep_fileformat) + keep_fileformat = FALSE; + else + { + if (eap != NULL && eap->force_ff != 0) + { + fileformat = get_fileformat_force(curbuf, eap); + try_unix = try_dos = try_mac = FALSE; + } + else if (curbuf->b_p_bin) + fileformat = EOL_UNIX; /* binary: use Unix format */ + else if (*p_ffs == NUL) + fileformat = get_fileformat(curbuf);/* use format from buffer */ + else + fileformat = EOL_UNKNOWN; /* detect from file */ + } + +#ifdef USE_ICONV + if (iconv_fd != (iconv_t)-1) + { + /* aborted conversion with iconv(), close the descriptor */ + iconv_close(iconv_fd); + iconv_fd = (iconv_t)-1; + } +#endif + + if (advance_fenc) + { + /* + * Try the next entry in 'fileencodings'. + */ + advance_fenc = FALSE; + + if (eap != NULL && eap->force_enc != 0) + { + /* Conversion given with "++cc=" wasn't possible, read + * without conversion. */ + notconverted = TRUE; + conv_error = 0; + if (fenc_alloced) + vim_free(fenc); + fenc = (char_u *)""; + fenc_alloced = FALSE; + } + else + { + if (fenc_alloced) + vim_free(fenc); + if (fenc_next != NULL) + { + fenc = next_fenc(&fenc_next); + fenc_alloced = (fenc_next != NULL); + } + else + { + fenc = (char_u *)""; + fenc_alloced = FALSE; + } + } + if (tmpname != NULL) + { + mch_remove(tmpname); /* delete converted file */ + VIM_CLEAR(tmpname); + } + } + + /* + * Conversion may be required when the encoding of the file is different + * from 'encoding' or 'encoding' is UTF-16, UCS-2 or UCS-4. + */ + fio_flags = 0; + converted = need_conversion(fenc); + if (converted) + { + + /* "ucs-bom" means we need to check the first bytes of the file + * for a BOM. */ + if (STRCMP(fenc, ENC_UCSBOM) == 0) + fio_flags = FIO_UCSBOM; + + /* + * Check if UCS-2/4 or Latin1 to UTF-8 conversion needs to be + * done. This is handled below after read(). Prepare the + * fio_flags to avoid having to parse the string each time. + * Also check for Unicode to Latin1 conversion, because iconv() + * appears not to handle this correctly. This works just like + * conversion to UTF-8 except how the resulting character is put in + * the buffer. + */ + else if (enc_utf8 || STRCMP(p_enc, "latin1") == 0) + fio_flags = get_fio_flags(fenc); + +#ifdef WIN3264 + /* + * Conversion from an MS-Windows codepage to UTF-8 or another codepage + * is handled with MultiByteToWideChar(). + */ + if (fio_flags == 0) + fio_flags = get_win_fio_flags(fenc); +#endif + +#ifdef MACOS_CONVERT + /* Conversion from Apple MacRoman to latin1 or UTF-8 */ + if (fio_flags == 0) + fio_flags = get_mac_fio_flags(fenc); +#endif + +#ifdef USE_ICONV + /* + * Try using iconv() if we can't convert internally. + */ + if (fio_flags == 0 +# ifdef FEAT_EVAL + && !did_iconv +# endif + ) + iconv_fd = (iconv_t)my_iconv_open( + enc_utf8 ? (char_u *)"utf-8" : p_enc, fenc); +#endif + +#ifdef FEAT_EVAL + /* + * Use the 'charconvert' expression when conversion is required + * and we can't do it internally or with iconv(). + */ + if (fio_flags == 0 && !read_stdin && !read_buffer && *p_ccv != NUL + && !read_fifo +# ifdef USE_ICONV + && iconv_fd == (iconv_t)-1 +# endif + ) + { +# ifdef USE_ICONV + did_iconv = FALSE; +# endif + /* Skip conversion when it's already done (retry for wrong + * "fileformat"). */ + if (tmpname == NULL) + { + tmpname = readfile_charconvert(fname, fenc, &fd); + if (tmpname == NULL) + { + /* Conversion failed. Try another one. */ + advance_fenc = TRUE; + if (fd < 0) + { + /* Re-opening the original file failed! */ + emsg(_("E202: Conversion made file unreadable!")); + error = TRUE; + goto failed; + } + goto retry; + } + } + } + else +#endif + { + if (fio_flags == 0 +#ifdef USE_ICONV + && iconv_fd == (iconv_t)-1 +#endif + ) + { + /* Conversion wanted but we can't. + * Try the next conversion in 'fileencodings' */ + advance_fenc = TRUE; + goto retry; + } + } + } + + /* Set "can_retry" when it's possible to rewind the file and try with + * another "fenc" value. It's FALSE when no other "fenc" to try, reading + * stdin or fixed at a specific encoding. */ + can_retry = (*fenc != NUL && !read_stdin && !read_fifo && !keep_dest_enc); + + if (!skip_read) + { + linerest = 0; + filesize = 0; + skip_count = lines_to_skip; + read_count = lines_to_read; + conv_restlen = 0; +#ifdef FEAT_PERSISTENT_UNDO + read_undo_file = (newfile && (flags & READ_KEEP_UNDO) == 0 + && curbuf->b_ffname != NULL + && curbuf->b_p_udf + && !filtering + && !read_fifo + && !read_stdin + && !read_buffer); + if (read_undo_file) + sha256_start(&sha_ctx); +#endif +#ifdef FEAT_CRYPT + if (curbuf->b_cryptstate != NULL) + { + /* Need to free the state, but keep the key, don't want to ask for + * it again. */ + crypt_free_state(curbuf->b_cryptstate); + curbuf->b_cryptstate = NULL; + } +#endif + } + + while (!error && !got_int) + { + /* + * We allocate as much space for the file as we can get, plus + * space for the old line plus room for one terminating NUL. + * The amount is limited by the fact that read() only can read + * upto max_unsigned characters (and other things). + */ + if (!skip_read) + { +#if defined(SSIZE_MAX) && (SSIZE_MAX < 0x10000L) + size = SSIZE_MAX; /* use max I/O size, 52K */ +#else + /* Use buffer >= 64K. Add linerest to double the size if the + * line gets very long, to avoid a lot of copying. But don't + * read more than 1 Mbyte at a time, so we can be interrupted. + */ + size = 0x10000L + linerest; + if (size > 0x100000L) + size = 0x100000L; +#endif + } + + /* Protect against the argument of lalloc() going negative. */ + if (size < 0 || size + linerest + 1 < 0 || linerest >= MAXCOL) + { + ++split; + *ptr = NL; /* split line by inserting a NL */ + size = 1; + } + else + { + if (!skip_read) + { + for ( ; size >= 10; size = (long)((long_u)size >> 1)) + { + if ((new_buffer = lalloc((long_u)(size + linerest + 1), + FALSE)) != NULL) + break; + } + if (new_buffer == NULL) + { + do_outofmem_msg((long_u)(size * 2 + linerest + 1)); + error = TRUE; + break; + } + if (linerest) /* copy characters from the previous buffer */ + mch_memmove(new_buffer, ptr - linerest, (size_t)linerest); + vim_free(buffer); + buffer = new_buffer; + ptr = buffer + linerest; + line_start = buffer; + + /* May need room to translate into. + * For iconv() we don't really know the required space, use a + * factor ICONV_MULT. + * latin1 to utf-8: 1 byte becomes up to 2 bytes + * utf-16 to utf-8: 2 bytes become up to 3 bytes, 4 bytes + * become up to 4 bytes, size must be multiple of 2 + * ucs-2 to utf-8: 2 bytes become up to 3 bytes, size must be + * multiple of 2 + * ucs-4 to utf-8: 4 bytes become up to 6 bytes, size must be + * multiple of 4 */ + real_size = (int)size; +#ifdef USE_ICONV + if (iconv_fd != (iconv_t)-1) + size = size / ICONV_MULT; + else +#endif + if (fio_flags & FIO_LATIN1) + size = size / 2; + else if (fio_flags & (FIO_UCS2 | FIO_UTF16)) + size = (size * 2 / 3) & ~1; + else if (fio_flags & FIO_UCS4) + size = (size * 2 / 3) & ~3; + else if (fio_flags == FIO_UCSBOM) + size = size / ICONV_MULT; /* worst case */ +#ifdef WIN3264 + else if (fio_flags & FIO_CODEPAGE) + size = size / ICONV_MULT; /* also worst case */ +#endif +#ifdef MACOS_CONVERT + else if (fio_flags & FIO_MACROMAN) + size = size / ICONV_MULT; /* also worst case */ +#endif + + if (conv_restlen > 0) + { + /* Insert unconverted bytes from previous line. */ + mch_memmove(ptr, conv_rest, conv_restlen); + ptr += conv_restlen; + size -= conv_restlen; + } + + if (read_buffer) + { + /* + * Read bytes from curbuf. Used for converting text read + * from stdin. + */ + if (read_buf_lnum > from) + size = 0; + else + { + int n, ni; + long tlen; + + tlen = 0; + for (;;) + { + p = ml_get(read_buf_lnum) + read_buf_col; + n = (int)STRLEN(p); + if ((int)tlen + n + 1 > size) + { + /* Filled up to "size", append partial line. + * Change NL to NUL to reverse the effect done + * below. */ + n = (int)(size - tlen); + for (ni = 0; ni < n; ++ni) + { + if (p[ni] == NL) + ptr[tlen++] = NUL; + else + ptr[tlen++] = p[ni]; + } + read_buf_col += n; + break; + } + else + { + /* Append whole line and new-line. Change NL + * to NUL to reverse the effect done below. */ + for (ni = 0; ni < n; ++ni) + { + if (p[ni] == NL) + ptr[tlen++] = NUL; + else + ptr[tlen++] = p[ni]; + } + ptr[tlen++] = NL; + read_buf_col = 0; + if (++read_buf_lnum > from) + { + /* When the last line didn't have an + * end-of-line don't add it now either. */ + if (!curbuf->b_p_eol) + --tlen; + size = tlen; + break; + } + } + } + } + } + else + { + /* + * Read bytes from the file. + */ + size = read_eintr(fd, ptr, size); + } + +#ifdef FEAT_CRYPT + /* + * At start of file: Check for magic number of encryption. + */ + if (filesize == 0 && size > 0) + cryptkey = check_for_cryptkey(cryptkey, ptr, &size, + &filesize, newfile, sfname, + &did_ask_for_key); + /* + * Decrypt the read bytes. This is done before checking for + * EOF because the crypt layer may be buffering. + */ + if (cryptkey != NULL && curbuf->b_cryptstate != NULL + && size > 0) + { +# ifdef CRYPT_NOT_INPLACE + if (crypt_works_inplace(curbuf->b_cryptstate)) + { +# endif + crypt_decode_inplace(curbuf->b_cryptstate, ptr, size); +# ifdef CRYPT_NOT_INPLACE + } + else + { + char_u *newptr = NULL; + int decrypted_size; + + decrypted_size = crypt_decode_alloc( + curbuf->b_cryptstate, ptr, size, &newptr); + + /* If the crypt layer is buffering, not producing + * anything yet, need to read more. */ + if (decrypted_size == 0) + continue; + + if (linerest == 0) + { + /* Simple case: reuse returned buffer (may be + * NULL, checked later). */ + new_buffer = newptr; + } + else + { + long_u new_size; + + /* Need new buffer to add bytes carried over. */ + new_size = (long_u)(decrypted_size + linerest + 1); + new_buffer = lalloc(new_size, FALSE); + if (new_buffer == NULL) + { + do_outofmem_msg(new_size); + error = TRUE; + break; + } + + mch_memmove(new_buffer, buffer, linerest); + if (newptr != NULL) + mch_memmove(new_buffer + linerest, newptr, + decrypted_size); + } + + if (new_buffer != NULL) + { + vim_free(buffer); + buffer = new_buffer; + new_buffer = NULL; + line_start = buffer; + ptr = buffer + linerest; + } + size = decrypted_size; + } +# endif + } +#endif + + if (size <= 0) + { + if (size < 0) /* read error */ + error = TRUE; + else if (conv_restlen > 0) + { + /* + * Reached end-of-file but some trailing bytes could + * not be converted. Truncated file? + */ + + /* When we did a conversion report an error. */ + if (fio_flags != 0 +#ifdef USE_ICONV + || iconv_fd != (iconv_t)-1 +#endif + ) + { + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = curbuf->b_ml.ml_line_count + - linecnt + 1; + } + /* Remember the first linenr with an illegal byte */ + else if (illegal_byte == 0) + illegal_byte = curbuf->b_ml.ml_line_count + - linecnt + 1; + if (bad_char_behavior == BAD_DROP) + { + *(ptr - conv_restlen) = NUL; + conv_restlen = 0; + } + else + { + /* Replace the trailing bytes with the replacement + * character if we were converting; if we weren't, + * leave the UTF8 checking code to do it, as it + * works slightly differently. */ + if (bad_char_behavior != BAD_KEEP && (fio_flags != 0 +#ifdef USE_ICONV + || iconv_fd != (iconv_t)-1 +#endif + )) + { + while (conv_restlen > 0) + { + *(--ptr) = bad_char_behavior; + --conv_restlen; + } + } + fio_flags = 0; /* don't convert this */ +#ifdef USE_ICONV + if (iconv_fd != (iconv_t)-1) + { + iconv_close(iconv_fd); + iconv_fd = (iconv_t)-1; + } +#endif + } + } + } + } + skip_read = FALSE; + + /* + * At start of file (or after crypt magic number): Check for BOM. + * Also check for a BOM for other Unicode encodings, but not after + * converting with 'charconvert' or when a BOM has already been + * found. + */ + if ((filesize == 0 +#ifdef FEAT_CRYPT + || (cryptkey != NULL + && filesize == crypt_get_header_len( + crypt_get_method_nr(curbuf))) +#endif + ) + && (fio_flags == FIO_UCSBOM + || (!curbuf->b_p_bomb + && tmpname == NULL + && (*fenc == 'u' || (*fenc == NUL && enc_utf8))))) + { + char_u *ccname; + int blen; + + /* no BOM detection in a short file or in binary mode */ + if (size < 2 || curbuf->b_p_bin) + ccname = NULL; + else + ccname = check_for_bom(ptr, size, &blen, + fio_flags == FIO_UCSBOM ? FIO_ALL : get_fio_flags(fenc)); + if (ccname != NULL) + { + /* Remove BOM from the text */ + filesize += blen; + size -= blen; + mch_memmove(ptr, ptr + blen, (size_t)size); + if (set_options) + { + curbuf->b_p_bomb = TRUE; + curbuf->b_start_bomb = TRUE; + } + } + + if (fio_flags == FIO_UCSBOM) + { + if (ccname == NULL) + { + /* No BOM detected: retry with next encoding. */ + advance_fenc = TRUE; + } + else + { + /* BOM detected: set "fenc" and jump back */ + if (fenc_alloced) + vim_free(fenc); + fenc = ccname; + fenc_alloced = FALSE; + } + /* retry reading without getting new bytes or rewinding */ + skip_read = TRUE; + goto retry; + } + } + + /* Include not converted bytes. */ + ptr -= conv_restlen; + size += conv_restlen; + conv_restlen = 0; + /* + * Break here for a read error or end-of-file. + */ + if (size <= 0) + break; + + +#ifdef USE_ICONV + if (iconv_fd != (iconv_t)-1) + { + /* + * Attempt conversion of the read bytes to 'encoding' using + * iconv(). + */ + const char *fromp; + char *top; + size_t from_size; + size_t to_size; + + fromp = (char *)ptr; + from_size = size; + ptr += size; + top = (char *)ptr; + to_size = real_size - size; + + /* + * If there is conversion error or not enough room try using + * another conversion. Except for when there is no + * alternative (help files). + */ + while ((iconv(iconv_fd, (void *)&fromp, &from_size, + &top, &to_size) + == (size_t)-1 && ICONV_ERRNO != ICONV_EINVAL) + || from_size > CONV_RESTLEN) + { + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, + ptr, (char_u *)top); + + /* Deal with a bad byte and continue with the next. */ + ++fromp; + --from_size; + if (bad_char_behavior == BAD_KEEP) + { + *top++ = *(fromp - 1); + --to_size; + } + else if (bad_char_behavior != BAD_DROP) + { + *top++ = bad_char_behavior; + --to_size; + } + } + + if (from_size > 0) + { + /* Some remaining characters, keep them for the next + * round. */ + mch_memmove(conv_rest, (char_u *)fromp, from_size); + conv_restlen = (int)from_size; + } + + /* move the linerest to before the converted characters */ + line_start = ptr - linerest; + mch_memmove(line_start, buffer, (size_t)linerest); + size = (long)((char_u *)top - ptr); + } +#endif + +#ifdef WIN3264 + if (fio_flags & FIO_CODEPAGE) + { + char_u *src, *dst; + WCHAR ucs2buf[3]; + int ucs2len; + int codepage = FIO_GET_CP(fio_flags); + int bytelen; + int found_bad; + char replstr[2]; + + /* + * Conversion from an MS-Windows codepage or UTF-8 to UTF-8 or + * a codepage, using standard MS-Windows functions. This + * requires two steps: + * 1. convert from 'fileencoding' to ucs-2 + * 2. convert from ucs-2 to 'encoding' + * + * Because there may be illegal bytes AND an incomplete byte + * sequence at the end, we may have to do the conversion one + * character at a time to get it right. + */ + + /* Replacement string for WideCharToMultiByte(). */ + if (bad_char_behavior > 0) + replstr[0] = bad_char_behavior; + else + replstr[0] = '?'; + replstr[1] = NUL; + + /* + * Move the bytes to the end of the buffer, so that we have + * room to put the result at the start. + */ + src = ptr + real_size - size; + mch_memmove(src, ptr, size); + + /* + * Do the conversion. + */ + dst = ptr; + size = size; + while (size > 0) + { + found_bad = FALSE; + +# ifdef CP_UTF8 /* VC 4.1 doesn't define CP_UTF8 */ + if (codepage == CP_UTF8) + { + /* Handle CP_UTF8 input ourselves to be able to handle + * trailing bytes properly. + * Get one UTF-8 character from src. */ + bytelen = (int)utf_ptr2len_len(src, size); + if (bytelen > size) + { + /* Only got some bytes of a character. Normally + * it's put in "conv_rest", but if it's too long + * deal with it as if they were illegal bytes. */ + if (bytelen <= CONV_RESTLEN) + break; + + /* weird overlong byte sequence */ + bytelen = size; + found_bad = TRUE; + } + else + { + int u8c = utf_ptr2char(src); + + if (u8c > 0xffff || (*src >= 0x80 && bytelen == 1)) + found_bad = TRUE; + ucs2buf[0] = u8c; + ucs2len = 1; + } + } + else +# endif + { + /* We don't know how long the byte sequence is, try + * from one to three bytes. */ + for (bytelen = 1; bytelen <= size && bytelen <= 3; + ++bytelen) + { + ucs2len = MultiByteToWideChar(codepage, + MB_ERR_INVALID_CHARS, + (LPCSTR)src, bytelen, + ucs2buf, 3); + if (ucs2len > 0) + break; + } + if (ucs2len == 0) + { + /* If we have only one byte then it's probably an + * incomplete byte sequence. Otherwise discard + * one byte as a bad character. */ + if (size == 1) + break; + found_bad = TRUE; + bytelen = 1; + } + } + + if (!found_bad) + { + int i; + + /* Convert "ucs2buf[ucs2len]" to 'enc' in "dst". */ + if (enc_utf8) + { + /* From UCS-2 to UTF-8. Cannot fail. */ + for (i = 0; i < ucs2len; ++i) + dst += utf_char2bytes(ucs2buf[i], dst); + } + else + { + BOOL bad = FALSE; + int dstlen; + + /* From UCS-2 to "enc_codepage". If the + * conversion uses the default character "?", + * the data doesn't fit in this encoding. */ + dstlen = WideCharToMultiByte(enc_codepage, 0, + (LPCWSTR)ucs2buf, ucs2len, + (LPSTR)dst, (int)(src - dst), + replstr, &bad); + if (bad) + found_bad = TRUE; + else + dst += dstlen; + } + } + + if (found_bad) + { + /* Deal with bytes we can't convert. */ + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, ptr, dst); + if (bad_char_behavior != BAD_DROP) + { + if (bad_char_behavior == BAD_KEEP) + { + mch_memmove(dst, src, bytelen); + dst += bytelen; + } + else + *dst++ = bad_char_behavior; + } + } + + src += bytelen; + size -= bytelen; + } + + if (size > 0) + { + /* An incomplete byte sequence remaining. */ + mch_memmove(conv_rest, src, size); + conv_restlen = size; + } + + /* The new size is equal to how much "dst" was advanced. */ + size = (long)(dst - ptr); + } + else +#endif +#ifdef MACOS_CONVERT + if (fio_flags & FIO_MACROMAN) + { + /* + * Conversion from Apple MacRoman char encoding to UTF-8 or + * latin1. This is in os_mac_conv.c. + */ + if (macroman2enc(ptr, &size, real_size) == FAIL) + goto rewind_retry; + } + else +#endif + if (fio_flags != 0) + { + int u8c; + char_u *dest; + char_u *tail = NULL; + + /* + * "enc_utf8" set: Convert Unicode or Latin1 to UTF-8. + * "enc_utf8" not set: Convert Unicode to Latin1. + * Go from end to start through the buffer, because the number + * of bytes may increase. + * "dest" points to after where the UTF-8 bytes go, "p" points + * to after the next character to convert. + */ + dest = ptr + real_size; + if (fio_flags == FIO_LATIN1 || fio_flags == FIO_UTF8) + { + p = ptr + size; + if (fio_flags == FIO_UTF8) + { + /* Check for a trailing incomplete UTF-8 sequence */ + tail = ptr + size - 1; + while (tail > ptr && (*tail & 0xc0) == 0x80) + --tail; + if (tail + utf_byte2len(*tail) <= ptr + size) + tail = NULL; + else + p = tail; + } + } + else if (fio_flags & (FIO_UCS2 | FIO_UTF16)) + { + /* Check for a trailing byte */ + p = ptr + (size & ~1); + if (size & 1) + tail = p; + if ((fio_flags & FIO_UTF16) && p > ptr) + { + /* Check for a trailing leading word */ + if (fio_flags & FIO_ENDIAN_L) + { + u8c = (*--p << 8); + u8c += *--p; + } + else + { + u8c = *--p; + u8c += (*--p << 8); + } + if (u8c >= 0xd800 && u8c <= 0xdbff) + tail = p; + else + p += 2; + } + } + else /* FIO_UCS4 */ + { + /* Check for trailing 1, 2 or 3 bytes */ + p = ptr + (size & ~3); + if (size & 3) + tail = p; + } + + /* If there is a trailing incomplete sequence move it to + * conv_rest[]. */ + if (tail != NULL) + { + conv_restlen = (int)((ptr + size) - tail); + mch_memmove(conv_rest, (char_u *)tail, conv_restlen); + size -= conv_restlen; + } + + + while (p > ptr) + { + if (fio_flags & FIO_LATIN1) + u8c = *--p; + else if (fio_flags & (FIO_UCS2 | FIO_UTF16)) + { + if (fio_flags & FIO_ENDIAN_L) + { + u8c = (*--p << 8); + u8c += *--p; + } + else + { + u8c = *--p; + u8c += (*--p << 8); + } + if ((fio_flags & FIO_UTF16) + && u8c >= 0xdc00 && u8c <= 0xdfff) + { + int u16c; + + if (p == ptr) + { + /* Missing leading word. */ + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, + ptr, p); + if (bad_char_behavior == BAD_DROP) + continue; + if (bad_char_behavior != BAD_KEEP) + u8c = bad_char_behavior; + } + + /* found second word of double-word, get the first + * word and compute the resulting character */ + if (fio_flags & FIO_ENDIAN_L) + { + u16c = (*--p << 8); + u16c += *--p; + } + else + { + u16c = *--p; + u16c += (*--p << 8); + } + u8c = 0x10000 + ((u16c & 0x3ff) << 10) + + (u8c & 0x3ff); + + /* Check if the word is indeed a leading word. */ + if (u16c < 0xd800 || u16c > 0xdbff) + { + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, + ptr, p); + if (bad_char_behavior == BAD_DROP) + continue; + if (bad_char_behavior != BAD_KEEP) + u8c = bad_char_behavior; + } + } + } + else if (fio_flags & FIO_UCS4) + { + if (fio_flags & FIO_ENDIAN_L) + { + u8c = (unsigned)*--p << 24; + u8c += (unsigned)*--p << 16; + u8c += (unsigned)*--p << 8; + u8c += *--p; + } + else /* big endian */ + { + u8c = *--p; + u8c += (unsigned)*--p << 8; + u8c += (unsigned)*--p << 16; + u8c += (unsigned)*--p << 24; + } + } + else /* UTF-8 */ + { + if (*--p < 0x80) + u8c = *p; + else + { + len = utf_head_off(ptr, p); + p -= len; + u8c = utf_ptr2char(p); + if (len == 0) + { + /* Not a valid UTF-8 character, retry with + * another fenc when possible, otherwise just + * report the error. */ + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, + ptr, p); + if (bad_char_behavior == BAD_DROP) + continue; + if (bad_char_behavior != BAD_KEEP) + u8c = bad_char_behavior; + } + } + } + if (enc_utf8) /* produce UTF-8 */ + { + dest -= utf_char2len(u8c); + (void)utf_char2bytes(u8c, dest); + } + else /* produce Latin1 */ + { + --dest; + if (u8c >= 0x100) + { + /* character doesn't fit in latin1, retry with + * another fenc when possible, otherwise just + * report the error. */ + if (can_retry) + goto rewind_retry; + if (conv_error == 0) + conv_error = readfile_linenr(linecnt, ptr, p); + if (bad_char_behavior == BAD_DROP) + ++dest; + else if (bad_char_behavior == BAD_KEEP) + *dest = u8c; + else if (eap != NULL && eap->bad_char != 0) + *dest = bad_char_behavior; + else + *dest = 0xBF; + } + else + *dest = u8c; + } + } + + /* move the linerest to before the converted characters */ + line_start = dest - linerest; + mch_memmove(line_start, buffer, (size_t)linerest); + size = (long)((ptr + real_size) - dest); + ptr = dest; + } + else if (enc_utf8 && !curbuf->b_p_bin) + { + int incomplete_tail = FALSE; + + /* Reading UTF-8: Check if the bytes are valid UTF-8. */ + for (p = ptr; ; ++p) + { + int todo = (int)((ptr + size) - p); + int l; + + if (todo <= 0) + break; + if (*p >= 0x80) + { + /* A length of 1 means it's an illegal byte. Accept + * an incomplete character at the end though, the next + * read() will get the next bytes, we'll check it + * then. */ + l = utf_ptr2len_len(p, todo); + if (l > todo && !incomplete_tail) + { + /* Avoid retrying with a different encoding when + * a truncated file is more likely, or attempting + * to read the rest of an incomplete sequence when + * we have already done so. */ + if (p > ptr || filesize > 0) + incomplete_tail = TRUE; + /* Incomplete byte sequence, move it to conv_rest[] + * and try to read the rest of it, unless we've + * already done so. */ + if (p > ptr) + { + conv_restlen = todo; + mch_memmove(conv_rest, p, conv_restlen); + size -= conv_restlen; + break; + } + } + if (l == 1 || l > todo) + { + /* Illegal byte. If we can try another encoding + * do that, unless at EOF where a truncated + * file is more likely than a conversion error. */ + if (can_retry && !incomplete_tail) + break; +#ifdef USE_ICONV + /* When we did a conversion report an error. */ + if (iconv_fd != (iconv_t)-1 && conv_error == 0) + conv_error = readfile_linenr(linecnt, ptr, p); +#endif + /* Remember the first linenr with an illegal byte */ + if (conv_error == 0 && illegal_byte == 0) + illegal_byte = readfile_linenr(linecnt, ptr, p); + + /* Drop, keep or replace the bad byte. */ + if (bad_char_behavior == BAD_DROP) + { + mch_memmove(p, p + 1, todo - 1); + --p; + --size; + } + else if (bad_char_behavior != BAD_KEEP) + *p = bad_char_behavior; + } + else + p += l - 1; + } + } + if (p < ptr + size && !incomplete_tail) + { + /* Detected a UTF-8 error. */ +rewind_retry: + /* Retry reading with another conversion. */ +#if defined(FEAT_EVAL) && defined(USE_ICONV) + if (*p_ccv != NUL && iconv_fd != (iconv_t)-1) + /* iconv() failed, try 'charconvert' */ + did_iconv = TRUE; + else +#endif + /* use next item from 'fileencodings' */ + advance_fenc = TRUE; + file_rewind = TRUE; + goto retry; + } + } + + /* count the number of characters (after conversion!) */ + filesize += size; + + /* + * when reading the first part of a file: guess EOL type + */ + if (fileformat == EOL_UNKNOWN) + { + /* First try finding a NL, for Dos and Unix */ + if (try_dos || try_unix) + { + /* Reset the carriage return counter. */ + if (try_mac) + try_mac = 1; + + for (p = ptr; p < ptr + size; ++p) + { + if (*p == NL) + { + if (!try_unix + || (try_dos && p > ptr && p[-1] == CAR)) + fileformat = EOL_DOS; + else + fileformat = EOL_UNIX; + break; + } + else if (*p == CAR && try_mac) + try_mac++; + } + + /* Don't give in to EOL_UNIX if EOL_MAC is more likely */ + if (fileformat == EOL_UNIX && try_mac) + { + /* Need to reset the counters when retrying fenc. */ + try_mac = 1; + try_unix = 1; + for (; p >= ptr && *p != CAR; p--) + ; + if (p >= ptr) + { + for (p = ptr; p < ptr + size; ++p) + { + if (*p == NL) + try_unix++; + else if (*p == CAR) + try_mac++; + } + if (try_mac > try_unix) + fileformat = EOL_MAC; + } + } + else if (fileformat == EOL_UNKNOWN && try_mac == 1) + /* Looking for CR but found no end-of-line markers at + * all: use the default format. */ + fileformat = default_fileformat(); + } + + /* No NL found: may use Mac format */ + if (fileformat == EOL_UNKNOWN && try_mac) + fileformat = EOL_MAC; + + /* Still nothing found? Use first format in 'ffs' */ + if (fileformat == EOL_UNKNOWN) + fileformat = default_fileformat(); + + /* if editing a new file: may set p_tx and p_ff */ + if (set_options) + set_fileformat(fileformat, OPT_LOCAL); + } + } + + /* + * This loop is executed once for every character read. + * Keep it fast! + */ + if (fileformat == EOL_MAC) + { + --ptr; + while (++ptr, --size >= 0) + { + /* catch most common case first */ + if ((c = *ptr) != NUL && c != CAR && c != NL) + continue; + if (c == NUL) + *ptr = NL; /* NULs are replaced by newlines! */ + else if (c == NL) + *ptr = CAR; /* NLs are replaced by CRs! */ + else + { + if (skip_count == 0) + { + *ptr = NUL; /* end of line */ + len = (colnr_T) (ptr - line_start + 1); + if (ml_append(lnum, line_start, len, newfile) == FAIL) + { + error = TRUE; + break; + } +#ifdef FEAT_PERSISTENT_UNDO + if (read_undo_file) + sha256_update(&sha_ctx, line_start, len); +#endif + ++lnum; + if (--read_count == 0) + { + error = TRUE; /* break loop */ + line_start = ptr; /* nothing left to write */ + break; + } + } + else + --skip_count; + line_start = ptr + 1; + } + } + } + else + { + --ptr; + while (++ptr, --size >= 0) + { + if ((c = *ptr) != NUL && c != NL) /* catch most common case */ + continue; + if (c == NUL) + *ptr = NL; /* NULs are replaced by newlines! */ + else + { + if (skip_count == 0) + { + *ptr = NUL; /* end of line */ + len = (colnr_T)(ptr - line_start + 1); + if (fileformat == EOL_DOS) + { + if (ptr > line_start && ptr[-1] == CAR) + { + /* remove CR before NL */ + ptr[-1] = NUL; + --len; + } + /* + * Reading in Dos format, but no CR-LF found! + * When 'fileformats' includes "unix", delete all + * the lines read so far and start all over again. + * Otherwise give an error message later. + */ + else if (ff_error != EOL_DOS) + { + if ( try_unix + && !read_stdin + && (read_buffer + || vim_lseek(fd, (off_T)0L, SEEK_SET) + == 0)) + { + fileformat = EOL_UNIX; + if (set_options) + set_fileformat(EOL_UNIX, OPT_LOCAL); + file_rewind = TRUE; + keep_fileformat = TRUE; + goto retry; + } + ff_error = EOL_DOS; + } + } + if (ml_append(lnum, line_start, len, newfile) == FAIL) + { + error = TRUE; + break; + } +#ifdef FEAT_PERSISTENT_UNDO + if (read_undo_file) + sha256_update(&sha_ctx, line_start, len); +#endif + ++lnum; + if (--read_count == 0) + { + error = TRUE; /* break loop */ + line_start = ptr; /* nothing left to write */ + break; + } + } + else + --skip_count; + line_start = ptr + 1; + } + } + } + linerest = (long)(ptr - line_start); + ui_breakcheck(); + } + +failed: + /* not an error, max. number of lines reached */ + if (error && read_count == 0) + error = FALSE; + + /* + * If we get EOF in the middle of a line, note the fact and + * complete the line ourselves. + * In Dos format ignore a trailing CTRL-Z, unless 'binary' set. + */ + if (!error + && !got_int + && linerest != 0 + && !(!curbuf->b_p_bin + && fileformat == EOL_DOS + && *line_start == Ctrl_Z + && ptr == line_start + 1)) + { + /* remember for when writing */ + if (set_options) + curbuf->b_p_eol = FALSE; + *ptr = NUL; + len = (colnr_T)(ptr - line_start + 1); + if (ml_append(lnum, line_start, len, newfile) == FAIL) + error = TRUE; + else + { +#ifdef FEAT_PERSISTENT_UNDO + if (read_undo_file) + sha256_update(&sha_ctx, line_start, len); +#endif + read_no_eol_lnum = ++lnum; + } + } + + if (set_options) + save_file_ff(curbuf); /* remember the current file format */ + +#ifdef FEAT_CRYPT + if (curbuf->b_cryptstate != NULL) + { + crypt_free_state(curbuf->b_cryptstate); + curbuf->b_cryptstate = NULL; + } + if (cryptkey != NULL && cryptkey != curbuf->b_p_key) + crypt_free_key(cryptkey); + /* Don't set cryptkey to NULL, it's used below as a flag that + * encryption was used. */ +#endif + + /* If editing a new file: set 'fenc' for the current buffer. + * Also for ":read ++edit file". */ + if (set_options) + set_string_option_direct((char_u *)"fenc", -1, fenc, + OPT_FREE|OPT_LOCAL, 0); + if (fenc_alloced) + vim_free(fenc); +#ifdef USE_ICONV + if (iconv_fd != (iconv_t)-1) + { + iconv_close(iconv_fd); + iconv_fd = (iconv_t)-1; + } +#endif + + if (!read_buffer && !read_stdin) + close(fd); /* errors are ignored */ +#ifdef HAVE_FD_CLOEXEC + else + { + int fdflags = fcntl(fd, F_GETFD); + if (fdflags >= 0 && (fdflags & FD_CLOEXEC) == 0) + (void)fcntl(fd, F_SETFD, fdflags | FD_CLOEXEC); + } +#endif + vim_free(buffer); + +#ifdef HAVE_DUP + if (read_stdin) + { + /* Use stderr for stdin, makes shell commands work. */ + close(0); + vim_ignored = dup(2); + } +#endif + + if (tmpname != NULL) + { + mch_remove(tmpname); /* delete converted file */ + vim_free(tmpname); + } + --no_wait_return; /* may wait for return now */ + + /* + * In recovery mode everything but autocommands is skipped. + */ + if (!recoverymode) + { + /* need to delete the last line, which comes from the empty buffer */ + if (newfile && wasempty && !(curbuf->b_ml.ml_flags & ML_EMPTY)) + { +#ifdef FEAT_NETBEANS_INTG + netbeansFireChanges = 0; +#endif + ml_delete(curbuf->b_ml.ml_line_count, FALSE); +#ifdef FEAT_NETBEANS_INTG + netbeansFireChanges = 1; +#endif + --linecnt; + } + linecnt = curbuf->b_ml.ml_line_count - linecnt; + if (filesize == 0) + linecnt = 0; + if (newfile || read_buffer) + { + redraw_curbuf_later(NOT_VALID); +#ifdef FEAT_DIFF + /* After reading the text into the buffer the diff info needs to + * be updated. */ + diff_invalidate(curbuf); +#endif +#ifdef FEAT_FOLDING + /* All folds in the window are invalid now. Mark them for update + * before triggering autocommands. */ + foldUpdateAll(curwin); +#endif + } + else if (linecnt) /* appended at least one line */ + appended_lines_mark(from, linecnt); + +#ifndef ALWAYS_USE_GUI + /* + * If we were reading from the same terminal as where messages go, + * the screen will have been messed up. + * Switch on raw mode now and clear the screen. + */ + if (read_stdin) + { + settmode(TMODE_RAW); /* set to raw mode */ + starttermcap(); + screenclear(); + } +#endif + + if (got_int) + { + if (!(flags & READ_DUMMY)) + { + filemess(curbuf, sfname, (char_u *)_(e_interr), 0); + if (newfile) + curbuf->b_p_ro = TRUE; /* must use "w!" now */ + } + msg_scroll = msg_save; +#ifdef FEAT_VIMINFO + check_marks_read(); +#endif + return OK; /* an interrupt isn't really an error */ + } + + if (!filtering && !(flags & READ_DUMMY)) + { + msg_add_fname(curbuf, sfname); /* fname in IObuff with quotes */ + c = FALSE; + +#ifdef UNIX + if (S_ISFIFO(perm)) /* fifo */ + { + STRCAT(IObuff, _("[fifo]")); + c = TRUE; + } + if (S_ISSOCK(perm)) /* or socket */ + { + STRCAT(IObuff, _("[socket]")); + c = TRUE; + } +# ifdef OPEN_CHR_FILES + if (S_ISCHR(perm)) /* or character special */ + { + STRCAT(IObuff, _("[character special]")); + c = TRUE; + } +# endif +#endif + if (curbuf->b_p_ro) + { + STRCAT(IObuff, shortmess(SHM_RO) ? _("[RO]") : _("[readonly]")); + c = TRUE; + } + if (read_no_eol_lnum) + { + msg_add_eol(); + c = TRUE; + } + if (ff_error == EOL_DOS) + { + STRCAT(IObuff, _("[CR missing]")); + c = TRUE; + } + if (split) + { + STRCAT(IObuff, _("[long lines split]")); + c = TRUE; + } + if (notconverted) + { + STRCAT(IObuff, _("[NOT converted]")); + c = TRUE; + } + else if (converted) + { + STRCAT(IObuff, _("[converted]")); + c = TRUE; + } +#ifdef FEAT_CRYPT + if (cryptkey != NULL) + { + crypt_append_msg(curbuf); + c = TRUE; + } +#endif + if (conv_error != 0) + { + sprintf((char *)IObuff + STRLEN(IObuff), + _("[CONVERSION ERROR in line %ld]"), (long)conv_error); + c = TRUE; + } + else if (illegal_byte > 0) + { + sprintf((char *)IObuff + STRLEN(IObuff), + _("[ILLEGAL BYTE in line %ld]"), (long)illegal_byte); + c = TRUE; + } + else if (error) + { + STRCAT(IObuff, _("[READ ERRORS]")); + c = TRUE; + } + if (msg_add_fileformat(fileformat)) + c = TRUE; +#ifdef FEAT_CRYPT + if (cryptkey != NULL) + msg_add_lines(c, (long)linecnt, filesize + - crypt_get_header_len(crypt_get_method_nr(curbuf))); + else +#endif + msg_add_lines(c, (long)linecnt, filesize); + + VIM_CLEAR(keep_msg); + msg_scrolled_ign = TRUE; +#ifdef ALWAYS_USE_GUI + /* Don't show the message when reading stdin, it would end up in a + * message box (which might be shown when exiting!) */ + if (read_stdin || read_buffer) + p = msg_may_trunc(FALSE, IObuff); + else +#endif + p = (char_u *)msg_trunc_attr((char *)IObuff, FALSE, 0); + if (read_stdin || read_buffer || restart_edit != 0 + || (msg_scrolled != 0 && !need_wait_return)) + /* Need to repeat the message after redrawing when: + * - When reading from stdin (the screen will be cleared next). + * - When restart_edit is set (otherwise there will be a delay + * before redrawing). + * - When the screen was scrolled but there is no wait-return + * prompt. */ + set_keep_msg(p, 0); + msg_scrolled_ign = FALSE; + } + + /* with errors writing the file requires ":w!" */ + if (newfile && (error + || conv_error != 0 + || (illegal_byte > 0 && bad_char_behavior != BAD_KEEP))) + curbuf->b_p_ro = TRUE; + + u_clearline(); /* cannot use "U" command after adding lines */ + + /* + * In Ex mode: cursor at last new line. + * Otherwise: cursor at first new line. + */ + if (exmode_active) + curwin->w_cursor.lnum = from + linecnt; + else + curwin->w_cursor.lnum = from + 1; + check_cursor_lnum(); + beginline(BL_WHITE | BL_FIX); /* on first non-blank */ + + /* + * Set '[ and '] marks to the newly read lines. + */ + curbuf->b_op_start.lnum = from + 1; + curbuf->b_op_start.col = 0; + curbuf->b_op_end.lnum = from + linecnt; + curbuf->b_op_end.col = 0; + +#ifdef WIN32 + /* + * Work around a weird problem: When a file has two links (only + * possible on NTFS) and we write through one link, then stat() it + * through the other link, the timestamp information may be wrong. + * It's correct again after reading the file, thus reset the timestamp + * here. + */ + if (newfile && !read_stdin && !read_buffer + && mch_stat((char *)fname, &st) >= 0) + { + buf_store_time(curbuf, &st, fname); + curbuf->b_mtime_read = curbuf->b_mtime; + } +#endif + } + msg_scroll = msg_save; + +#ifdef FEAT_VIMINFO + /* + * Get the marks before executing autocommands, so they can be used there. + */ + check_marks_read(); +#endif + + /* + * We remember if the last line of the read didn't have + * an eol even when 'binary' is off, to support turning 'fixeol' off, + * or writing the read again with 'binary' on. The latter is required + * for ":autocmd FileReadPost *.gz set bin|'[,']!gunzip" to work. + */ + curbuf->b_no_eol_lnum = read_no_eol_lnum; + + /* When reloading a buffer put the cursor at the first line that is + * different. */ + if (flags & READ_KEEP_UNDO) + u_find_first_changed(); + +#ifdef FEAT_PERSISTENT_UNDO + /* + * When opening a new file locate undo info and read it. + */ + if (read_undo_file) + { + char_u hash[UNDO_HASH_SIZE]; + + sha256_finish(&sha_ctx, hash); + u_read_undo(NULL, hash, fname); + } +#endif + + if (!read_stdin && !read_fifo && (!read_buffer || sfname != NULL)) + { + int m = msg_scroll; + int n = msg_scrolled; + + /* Save the fileformat now, otherwise the buffer will be considered + * modified if the format/encoding was automatically detected. */ + if (set_options) + save_file_ff(curbuf); + + /* + * The output from the autocommands should not overwrite anything and + * should not be overwritten: Set msg_scroll, restore its value if no + * output was done. + */ + msg_scroll = TRUE; + if (filtering) + apply_autocmds_exarg(EVENT_FILTERREADPOST, NULL, sfname, + FALSE, curbuf, eap); + else if (newfile || (read_buffer && sfname != NULL)) + { + apply_autocmds_exarg(EVENT_BUFREADPOST, NULL, sfname, + FALSE, curbuf, eap); + if (!au_did_filetype && *curbuf->b_p_ft != NUL) + /* + * EVENT_FILETYPE was not triggered but the buffer already has a + * filetype. Trigger EVENT_FILETYPE using the existing filetype. + */ + apply_autocmds(EVENT_FILETYPE, curbuf->b_p_ft, curbuf->b_fname, + TRUE, curbuf); + } + else + apply_autocmds_exarg(EVENT_FILEREADPOST, sfname, sfname, + FALSE, NULL, eap); + if (msg_scrolled == n) + msg_scroll = m; +# ifdef FEAT_EVAL + if (aborting()) /* autocmds may abort script processing */ + return FAIL; +# endif + } + + if (recoverymode && error) + return FAIL; + return OK; +} + +#if defined(OPEN_CHR_FILES) || defined(PROTO) +/* + * Returns TRUE if the file name argument is of the form "/dev/fd/\d\+", + * which is the name of files used for process substitution output by + * some shells on some operating systems, e.g., bash on SunOS. + * Do not accept "/dev/fd/[012]", opening these may hang Vim. + */ + int +is_dev_fd_file(char_u *fname) +{ + return (STRNCMP(fname, "/dev/fd/", 8) == 0 + && VIM_ISDIGIT(fname[8]) + && *skipdigits(fname + 9) == NUL + && (fname[9] != NUL + || (fname[8] != '0' && fname[8] != '1' && fname[8] != '2'))); +} +#endif + +/* + * From the current line count and characters read after that, estimate the + * line number where we are now. + * Used for error messages that include a line number. + */ + static linenr_T +readfile_linenr( + linenr_T linecnt, /* line count before reading more bytes */ + char_u *p, /* start of more bytes read */ + char_u *endp) /* end of more bytes read */ +{ + char_u *s; + linenr_T lnum; + + lnum = curbuf->b_ml.ml_line_count - linecnt + 1; + for (s = p; s < endp; ++s) + if (*s == '\n') + ++lnum; + return lnum; +} + +/* + * Fill "*eap" to force the 'fileencoding', 'fileformat' and 'binary to be + * equal to the buffer "buf". Used for calling readfile(). + * Returns OK or FAIL. + */ + int +prep_exarg(exarg_T *eap, buf_T *buf) +{ + eap->cmd = alloc(15 + (unsigned)STRLEN(buf->b_p_fenc)); + if (eap->cmd == NULL) + return FAIL; + + sprintf((char *)eap->cmd, "e ++enc=%s", buf->b_p_fenc); + eap->force_enc = 8; + eap->bad_char = buf->b_bad_char; + eap->force_ff = *buf->b_p_ff; + + eap->force_bin = buf->b_p_bin ? FORCE_BIN : FORCE_NOBIN; + eap->read_edit = FALSE; + eap->forceit = FALSE; + return OK; +} + +/* + * Set default or forced 'fileformat' and 'binary'. + */ + void +set_file_options(int set_options, exarg_T *eap) +{ + /* set default 'fileformat' */ + if (set_options) + { + if (eap != NULL && eap->force_ff != 0) + set_fileformat(get_fileformat_force(curbuf, eap), OPT_LOCAL); + else if (*p_ffs != NUL) + set_fileformat(default_fileformat(), OPT_LOCAL); + } + + /* set or reset 'binary' */ + if (eap != NULL && eap->force_bin != 0) + { + int oldval = curbuf->b_p_bin; + + curbuf->b_p_bin = (eap->force_bin == FORCE_BIN); + set_options_bin(oldval, curbuf->b_p_bin, OPT_LOCAL); + } +} + +/* + * Set forced 'fileencoding'. + */ + void +set_forced_fenc(exarg_T *eap) +{ + if (eap->force_enc != 0) + { + char_u *fenc = enc_canonize(eap->cmd + eap->force_enc); + + if (fenc != NULL) + set_string_option_direct((char_u *)"fenc", -1, + fenc, OPT_FREE|OPT_LOCAL, 0); + vim_free(fenc); + } +} + +/* + * Find next fileencoding to use from 'fileencodings'. + * "pp" points to fenc_next. It's advanced to the next item. + * When there are no more items, an empty string is returned and *pp is set to + * NULL. + * When *pp is not set to NULL, the result is in allocated memory. + */ + static char_u * +next_fenc(char_u **pp) +{ + char_u *p; + char_u *r; + + if (**pp == NUL) + { + *pp = NULL; + return (char_u *)""; + } + p = vim_strchr(*pp, ','); + if (p == NULL) + { + r = enc_canonize(*pp); + *pp += STRLEN(*pp); + } + else + { + r = vim_strnsave(*pp, (int)(p - *pp)); + *pp = p + 1; + if (r != NULL) + { + p = enc_canonize(r); + vim_free(r); + r = p; + } + } + if (r == NULL) /* out of memory */ + { + r = (char_u *)""; + *pp = NULL; + } + return r; +} + +#ifdef FEAT_EVAL +/* + * Convert a file with the 'charconvert' expression. + * This closes the file which is to be read, converts it and opens the + * resulting file for reading. + * Returns name of the resulting converted file (the caller should delete it + * after reading it). + * Returns NULL if the conversion failed ("*fdp" is not set) . + */ + static char_u * +readfile_charconvert( + char_u *fname, /* name of input file */ + char_u *fenc, /* converted from */ + int *fdp) /* in/out: file descriptor of file */ +{ + char_u *tmpname; + char *errmsg = NULL; + + tmpname = vim_tempname('r', FALSE); + if (tmpname == NULL) + errmsg = _("Can't find temp file for conversion"); + else + { + close(*fdp); /* close the input file, ignore errors */ + *fdp = -1; + if (eval_charconvert(fenc, enc_utf8 ? (char_u *)"utf-8" : p_enc, + fname, tmpname) == FAIL) + errmsg = _("Conversion with 'charconvert' failed"); + if (errmsg == NULL && (*fdp = mch_open((char *)tmpname, + O_RDONLY | O_EXTRA, 0)) < 0) + errmsg = _("can't read output of 'charconvert'"); + } + + if (errmsg != NULL) + { + /* Don't use emsg(), it breaks mappings, the retry with + * another type of conversion might still work. */ + msg(errmsg); + if (tmpname != NULL) + { + mch_remove(tmpname); /* delete converted file */ + VIM_CLEAR(tmpname); + } + } + + /* If the input file is closed, open it (caller should check for error). */ + if (*fdp < 0) + *fdp = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0); + + return tmpname; +} +#endif + + +#ifdef FEAT_VIMINFO +/* + * Read marks for the current buffer from the viminfo file, when we support + * buffer marks and the buffer has a name. + */ + static void +check_marks_read(void) +{ + if (!curbuf->b_marks_read && get_viminfo_parameter('\'') > 0 + && curbuf->b_ffname != NULL) + read_viminfo(NULL, VIF_WANT_MARKS); + + /* Always set b_marks_read; needed when 'viminfo' is changed to include + * the ' parameter after opening a buffer. */ + curbuf->b_marks_read = TRUE; +} +#endif + +#if defined(FEAT_CRYPT) || defined(PROTO) +/* + * Check for magic number used for encryption. Applies to the current buffer. + * If found, the magic number is removed from ptr[*sizep] and *sizep and + * *filesizep are updated. + * Return the (new) encryption key, NULL for no encryption. + */ + static char_u * +check_for_cryptkey( + char_u *cryptkey, /* previous encryption key or NULL */ + char_u *ptr, /* pointer to read bytes */ + long *sizep, /* length of read bytes */ + off_T *filesizep, /* nr of bytes used from file */ + int newfile, /* editing a new buffer */ + char_u *fname, /* file name to display */ + int *did_ask) /* flag: whether already asked for key */ +{ + int method = crypt_method_nr_from_magic((char *)ptr, *sizep); + int b_p_ro = curbuf->b_p_ro; + + if (method >= 0) + { + /* Mark the buffer as read-only until the decryption has taken place. + * Avoids accidentally overwriting the file with garbage. */ + curbuf->b_p_ro = TRUE; + + /* Set the cryptmethod local to the buffer. */ + crypt_set_cm_option(curbuf, method); + if (cryptkey == NULL && !*did_ask) + { + if (*curbuf->b_p_key) + cryptkey = curbuf->b_p_key; + else + { + /* When newfile is TRUE, store the typed key in the 'key' + * option and don't free it. bf needs hash of the key saved. + * Don't ask for the key again when first time Enter was hit. + * Happens when retrying to detect encoding. */ + smsg(_(need_key_msg), fname); + msg_scroll = TRUE; + crypt_check_method(method); + cryptkey = crypt_get_key(newfile, FALSE); + *did_ask = TRUE; + + /* check if empty key entered */ + if (cryptkey != NULL && *cryptkey == NUL) + { + if (cryptkey != curbuf->b_p_key) + vim_free(cryptkey); + cryptkey = NULL; + } + } + } + + if (cryptkey != NULL) + { + int header_len; + + curbuf->b_cryptstate = crypt_create_from_header( + method, cryptkey, ptr); + crypt_set_cm_option(curbuf, method); + + /* Remove cryptmethod specific header from the text. */ + header_len = crypt_get_header_len(method); + if (*sizep <= header_len) + /* invalid header, buffer can't be encrypted */ + return NULL; + *filesizep += header_len; + *sizep -= header_len; + mch_memmove(ptr, ptr + header_len, (size_t)*sizep); + + /* Restore the read-only flag. */ + curbuf->b_p_ro = b_p_ro; + } + } + /* When starting to edit a new file which does not have encryption, clear + * the 'key' option, except when starting up (called with -x argument) */ + else if (newfile && *curbuf->b_p_key != NUL && !starting) + set_option_value((char_u *)"key", 0L, (char_u *)"", OPT_LOCAL); + + return cryptkey; +} +#endif /* FEAT_CRYPT */ + +#ifdef UNIX + static void +set_file_time( + char_u *fname, + time_t atime, /* access time */ + time_t mtime) /* modification time */ +{ +# if defined(HAVE_UTIME) && defined(HAVE_UTIME_H) + struct utimbuf buf; + + buf.actime = atime; + buf.modtime = mtime; + (void)utime((char *)fname, &buf); +# else +# if defined(HAVE_UTIMES) + struct timeval tvp[2]; + + tvp[0].tv_sec = atime; + tvp[0].tv_usec = 0; + tvp[1].tv_sec = mtime; + tvp[1].tv_usec = 0; +# ifdef NeXT + (void)utimes((char *)fname, tvp); +# else + (void)utimes((char *)fname, (const struct timeval *)&tvp); +# endif +# endif +# endif +} +#endif /* UNIX */ + +#if defined(VMS) && !defined(MIN) +/* Older DECC compiler for VAX doesn't define MIN() */ +# define MIN(a, b) ((a) < (b) ? (a) : (b)) +#endif + +/* + * Return TRUE if a file appears to be read-only from the file permissions. + */ + int +check_file_readonly( + char_u *fname, /* full path to file */ + int perm) /* known permissions on file */ +{ +#ifndef USE_MCH_ACCESS + int fd = 0; +#endif + + return ( +#ifdef USE_MCH_ACCESS +# ifdef UNIX + (perm & 0222) == 0 || +# endif + mch_access((char *)fname, W_OK) +#else + (fd = mch_open((char *)fname, O_RDWR | O_EXTRA, 0)) < 0 + ? TRUE : (close(fd), FALSE) +#endif + ); +} + + +/* + * buf_write() - write to file "fname" lines "start" through "end" + * + * We do our own buffering here because fwrite() is so slow. + * + * If "forceit" is true, we don't care for errors when attempting backups. + * In case of an error everything possible is done to restore the original + * file. But when "forceit" is TRUE, we risk losing it. + * + * When "reset_changed" is TRUE and "append" == FALSE and "start" == 1 and + * "end" == curbuf->b_ml.ml_line_count, reset curbuf->b_changed. + * + * This function must NOT use NameBuff (because it's called by autowrite()). + * + * return FAIL for failure, OK otherwise + */ + int +buf_write( + buf_T *buf, + char_u *fname, + char_u *sfname, + linenr_T start, + linenr_T end, + exarg_T *eap, /* for forced 'ff' and 'fenc', can be + NULL! */ + int append, /* append to the file */ + int forceit, + int reset_changed, + int filtering) +{ + int fd; + char_u *backup = NULL; + int backup_copy = FALSE; /* copy the original file? */ + int dobackup; + char_u *ffname; + char_u *wfname = NULL; /* name of file to write to */ + char_u *s; + char_u *ptr; + char_u c; + int len; + linenr_T lnum; + long nchars; + char_u *errmsg = NULL; + int errmsg_allocated = FALSE; + char_u *errnum = NULL; + char_u *buffer; + char_u smallbuf[SMBUFSIZE]; + char_u *backup_ext; + int bufsize; + long perm; /* file permissions */ + int retval = OK; + int newfile = FALSE; /* TRUE if file doesn't exist yet */ + int msg_save = msg_scroll; + int overwriting; /* TRUE if writing over original */ + int no_eol = FALSE; /* no end-of-line written */ + int device = FALSE; /* writing to a device */ + stat_T st_old; + int prev_got_int = got_int; + int checking_conversion; + int file_readonly = FALSE; /* overwritten file is read-only */ + static char *err_readonly = "is read-only (cannot override: \"W\" in 'cpoptions')"; +#if defined(UNIX) /*XXX fix me sometime? */ + int made_writable = FALSE; /* 'w' bit has been set */ +#endif + /* writing everything */ + int whole = (start == 1 && end == buf->b_ml.ml_line_count); + linenr_T old_line_count = buf->b_ml.ml_line_count; + int attr; + int fileformat; + int write_bin; + struct bw_info write_info; /* info for buf_write_bytes() */ + int converted = FALSE; + int notconverted = FALSE; + char_u *fenc; /* effective 'fileencoding' */ + char_u *fenc_tofree = NULL; /* allocated "fenc" */ +#ifdef HAS_BW_FLAGS + int wb_flags = 0; +#endif +#ifdef HAVE_ACL + vim_acl_T acl = NULL; /* ACL copied from original file to + backup or new file */ +#endif +#ifdef FEAT_PERSISTENT_UNDO + int write_undo_file = FALSE; + context_sha256_T sha_ctx; +#endif + unsigned int bkc = get_bkc_value(buf); + + if (fname == NULL || *fname == NUL) /* safety check */ + return FAIL; + if (buf->b_ml.ml_mfp == NULL) + { + /* This can happen during startup when there is a stray "w" in the + * vimrc file. */ + emsg(_(e_emptybuf)); + return FAIL; + } + + /* + * Disallow writing from .exrc and .vimrc in current directory for + * security reasons. + */ + if (check_secure()) + return FAIL; + + /* Avoid a crash for a long name. */ + if (STRLEN(fname) >= MAXPATHL) + { + emsg(_(e_longname)); + return FAIL; + } + + /* must init bw_conv_buf and bw_iconv_fd before jumping to "fail" */ + write_info.bw_conv_buf = NULL; + write_info.bw_conv_error = FALSE; + write_info.bw_conv_error_lnum = 0; + write_info.bw_restlen = 0; +#ifdef USE_ICONV + write_info.bw_iconv_fd = (iconv_t)-1; +#endif +#ifdef FEAT_CRYPT + write_info.bw_buffer = buf; +#endif + + /* After writing a file changedtick changes but we don't want to display + * the line. */ + ex_no_reprint = TRUE; + + /* + * If there is no file name yet, use the one for the written file. + * BF_NOTEDITED is set to reflect this (in case the write fails). + * Don't do this when the write is for a filter command. + * Don't do this when appending. + * Only do this when 'cpoptions' contains the 'F' flag. + */ + if (buf->b_ffname == NULL + && reset_changed + && whole + && buf == curbuf +#ifdef FEAT_QUICKFIX + && !bt_nofile(buf) +#endif + && !filtering + && (!append || vim_strchr(p_cpo, CPO_FNAMEAPP) != NULL) + && vim_strchr(p_cpo, CPO_FNAMEW) != NULL) + { + if (set_rw_fname(fname, sfname) == FAIL) + return FAIL; + buf = curbuf; /* just in case autocmds made "buf" invalid */ + } + + if (sfname == NULL) + sfname = fname; + /* + * For Unix: Use the short file name whenever possible. + * Avoids problems with networks and when directory names are changed. + * Don't do this for MS-DOS, a "cd" in a sub-shell may have moved us to + * another directory, which we don't detect + */ + ffname = fname; /* remember full fname */ +#ifdef UNIX + fname = sfname; +#endif + + if (buf->b_ffname != NULL && fnamecmp(ffname, buf->b_ffname) == 0) + overwriting = TRUE; + else + overwriting = FALSE; + + if (exiting) + settmode(TMODE_COOK); /* when exiting allow typeahead now */ + + ++no_wait_return; /* don't wait for return yet */ + + /* + * Set '[ and '] marks to the lines to be written. + */ + buf->b_op_start.lnum = start; + buf->b_op_start.col = 0; + buf->b_op_end.lnum = end; + buf->b_op_end.col = 0; + + { + aco_save_T aco; + int buf_ffname = FALSE; + int buf_sfname = FALSE; + int buf_fname_f = FALSE; + int buf_fname_s = FALSE; + int did_cmd = FALSE; + int nofile_err = FALSE; + int empty_memline = (buf->b_ml.ml_mfp == NULL); + bufref_T bufref; + + /* + * Apply PRE autocommands. + * Set curbuf to the buffer to be written. + * Careful: The autocommands may call buf_write() recursively! + */ + if (ffname == buf->b_ffname) + buf_ffname = TRUE; + if (sfname == buf->b_sfname) + buf_sfname = TRUE; + if (fname == buf->b_ffname) + buf_fname_f = TRUE; + if (fname == buf->b_sfname) + buf_fname_s = TRUE; + + /* set curwin/curbuf to buf and save a few things */ + aucmd_prepbuf(&aco, buf); + set_bufref(&bufref, buf); + + if (append) + { + if (!(did_cmd = apply_autocmds_exarg(EVENT_FILEAPPENDCMD, + sfname, sfname, FALSE, curbuf, eap))) + { +#ifdef FEAT_QUICKFIX + if (overwriting && bt_nofile(curbuf)) + nofile_err = TRUE; + else +#endif + apply_autocmds_exarg(EVENT_FILEAPPENDPRE, + sfname, sfname, FALSE, curbuf, eap); + } + } + else if (filtering) + { + apply_autocmds_exarg(EVENT_FILTERWRITEPRE, + NULL, sfname, FALSE, curbuf, eap); + } + else if (reset_changed && whole) + { + int was_changed = curbufIsChanged(); + + did_cmd = apply_autocmds_exarg(EVENT_BUFWRITECMD, + sfname, sfname, FALSE, curbuf, eap); + if (did_cmd) + { + if (was_changed && !curbufIsChanged()) + { + /* Written everything correctly and BufWriteCmd has reset + * 'modified': Correct the undo information so that an + * undo now sets 'modified'. */ + u_unchanged(curbuf); + u_update_save_nr(curbuf); + } + } + else + { +#ifdef FEAT_QUICKFIX + if (overwriting && bt_nofile(curbuf)) + nofile_err = TRUE; + else +#endif + apply_autocmds_exarg(EVENT_BUFWRITEPRE, + sfname, sfname, FALSE, curbuf, eap); + } + } + else + { + if (!(did_cmd = apply_autocmds_exarg(EVENT_FILEWRITECMD, + sfname, sfname, FALSE, curbuf, eap))) + { +#ifdef FEAT_QUICKFIX + if (overwriting && bt_nofile(curbuf)) + nofile_err = TRUE; + else +#endif + apply_autocmds_exarg(EVENT_FILEWRITEPRE, + sfname, sfname, FALSE, curbuf, eap); + } + } + + /* restore curwin/curbuf and a few other things */ + aucmd_restbuf(&aco); + + /* + * In three situations we return here and don't write the file: + * 1. the autocommands deleted or unloaded the buffer. + * 2. The autocommands abort script processing. + * 3. If one of the "Cmd" autocommands was executed. + */ + if (!bufref_valid(&bufref)) + buf = NULL; + if (buf == NULL || (buf->b_ml.ml_mfp == NULL && !empty_memline) + || did_cmd || nofile_err +#ifdef FEAT_EVAL + || aborting() +#endif + ) + { + --no_wait_return; + msg_scroll = msg_save; + if (nofile_err) + emsg(_("E676: No matching autocommands for acwrite buffer")); + + if (nofile_err +#ifdef FEAT_EVAL + || aborting() +#endif + ) + /* An aborting error, interrupt or exception in the + * autocommands. */ + return FAIL; + if (did_cmd) + { + if (buf == NULL) + /* The buffer was deleted. We assume it was written + * (can't retry anyway). */ + return OK; + if (overwriting) + { + /* Assume the buffer was written, update the timestamp. */ + ml_timestamp(buf); + if (append) + buf->b_flags &= ~BF_NEW; + else + buf->b_flags &= ~BF_WRITE_MASK; + } + if (reset_changed && buf->b_changed && !append + && (overwriting || vim_strchr(p_cpo, CPO_PLUS) != NULL)) + /* Buffer still changed, the autocommands didn't work + * properly. */ + return FAIL; + return OK; + } +#ifdef FEAT_EVAL + if (!aborting()) +#endif + emsg(_("E203: Autocommands deleted or unloaded buffer to be written")); + return FAIL; + } + + /* + * The autocommands may have changed the number of lines in the file. + * When writing the whole file, adjust the end. + * When writing part of the file, assume that the autocommands only + * changed the number of lines that are to be written (tricky!). + */ + if (buf->b_ml.ml_line_count != old_line_count) + { + if (whole) /* write all */ + end = buf->b_ml.ml_line_count; + else if (buf->b_ml.ml_line_count > old_line_count) /* more lines */ + end += buf->b_ml.ml_line_count - old_line_count; + else /* less lines */ + { + end -= old_line_count - buf->b_ml.ml_line_count; + if (end < start) + { + --no_wait_return; + msg_scroll = msg_save; + emsg(_("E204: Autocommand changed number of lines in unexpected way")); + return FAIL; + } + } + } + + /* + * The autocommands may have changed the name of the buffer, which may + * be kept in fname, ffname and sfname. + */ + if (buf_ffname) + ffname = buf->b_ffname; + if (buf_sfname) + sfname = buf->b_sfname; + if (buf_fname_f) + fname = buf->b_ffname; + if (buf_fname_s) + fname = buf->b_sfname; + } + +#ifdef FEAT_NETBEANS_INTG + if (netbeans_active() && isNetbeansBuffer(buf)) + { + if (whole) + { + /* + * b_changed can be 0 after an undo, but we still need to write + * the buffer to NetBeans. + */ + if (buf->b_changed || isNetbeansModified(buf)) + { + --no_wait_return; /* may wait for return now */ + msg_scroll = msg_save; + netbeans_save_buffer(buf); /* no error checking... */ + return retval; + } + else + { + errnum = (char_u *)"E656: "; + errmsg = (char_u *)_("NetBeans disallows writes of unmodified buffers"); + buffer = NULL; + goto fail; + } + } + else + { + errnum = (char_u *)"E657: "; + errmsg = (char_u *)_("Partial writes disallowed for NetBeans buffers"); + buffer = NULL; + goto fail; + } + } +#endif + + if (shortmess(SHM_OVER) && !exiting) + msg_scroll = FALSE; /* overwrite previous file message */ + else + msg_scroll = TRUE; /* don't overwrite previous file message */ + if (!filtering) + filemess(buf, +#ifndef UNIX + sfname, +#else + fname, +#endif + (char_u *)"", 0); /* show that we are busy */ + msg_scroll = FALSE; /* always overwrite the file message now */ + + buffer = alloc(BUFSIZE); + if (buffer == NULL) /* can't allocate big buffer, use small + * one (to be able to write when out of + * memory) */ + { + buffer = smallbuf; + bufsize = SMBUFSIZE; + } + else + bufsize = BUFSIZE; + + /* + * Get information about original file (if there is one). + */ +#if defined(UNIX) + st_old.st_dev = 0; + st_old.st_ino = 0; + perm = -1; + if (mch_stat((char *)fname, &st_old) < 0) + newfile = TRUE; + else + { + perm = st_old.st_mode; + if (!S_ISREG(st_old.st_mode)) /* not a file */ + { + if (S_ISDIR(st_old.st_mode)) + { + errnum = (char_u *)"E502: "; + errmsg = (char_u *)_("is a directory"); + goto fail; + } + if (mch_nodetype(fname) != NODE_WRITABLE) + { + errnum = (char_u *)"E503: "; + errmsg = (char_u *)_("is not a file or writable device"); + goto fail; + } + /* It's a device of some kind (or a fifo) which we can write to + * but for which we can't make a backup. */ + device = TRUE; + newfile = TRUE; + perm = -1; + } + } +#else /* !UNIX */ + /* + * Check for a writable device name. + */ + c = mch_nodetype(fname); + if (c == NODE_OTHER) + { + errnum = (char_u *)"E503: "; + errmsg = (char_u *)_("is not a file or writable device"); + goto fail; + } + if (c == NODE_WRITABLE) + { +# if defined(MSWIN) + /* MS-Windows allows opening a device, but we will probably get stuck + * trying to write to it. */ + if (!p_odev) + { + errnum = (char_u *)"E796: "; + errmsg = (char_u *)_("writing to device disabled with 'opendevice' option"); + goto fail; + } +# endif + device = TRUE; + newfile = TRUE; + perm = -1; + } + else + { + perm = mch_getperm(fname); + if (perm < 0) + newfile = TRUE; + else if (mch_isdir(fname)) + { + errnum = (char_u *)"E502: "; + errmsg = (char_u *)_("is a directory"); + goto fail; + } + if (overwriting) + (void)mch_stat((char *)fname, &st_old); + } +#endif /* !UNIX */ + + if (!device && !newfile) + { + /* + * Check if the file is really writable (when renaming the file to + * make a backup we won't discover it later). + */ + file_readonly = check_file_readonly(fname, (int)perm); + + if (!forceit && file_readonly) + { + if (vim_strchr(p_cpo, CPO_FWRITE) != NULL) + { + errnum = (char_u *)"E504: "; + errmsg = (char_u *)_(err_readonly); + } + else + { + errnum = (char_u *)"E505: "; + errmsg = (char_u *)_("is read-only (add ! to override)"); + } + goto fail; + } + + /* + * Check if the timestamp hasn't changed since reading the file. + */ + if (overwriting) + { + retval = check_mtime(buf, &st_old); + if (retval == FAIL) + goto fail; + } + } + +#ifdef HAVE_ACL + /* + * For systems that support ACL: get the ACL from the original file. + */ + if (!newfile) + acl = mch_get_acl(fname); +#endif + + /* + * If 'backupskip' is not empty, don't make a backup for some files. + */ + dobackup = (p_wb || p_bk || *p_pm != NUL); +#ifdef FEAT_WILDIGN + if (dobackup && *p_bsk != NUL && match_file_list(p_bsk, sfname, ffname)) + dobackup = FALSE; +#endif + + /* + * Save the value of got_int and reset it. We don't want a previous + * interruption cancel writing, only hitting CTRL-C while writing should + * abort it. + */ + prev_got_int = got_int; + got_int = FALSE; + + /* Mark the buffer as 'being saved' to prevent changed buffer warnings */ + buf->b_saving = TRUE; + + /* + * If we are not appending or filtering, the file exists, and the + * 'writebackup', 'backup' or 'patchmode' option is set, need a backup. + * When 'patchmode' is set also make a backup when appending. + * + * Do not make any backup, if 'writebackup' and 'backup' are both switched + * off. This helps when editing large files on almost-full disks. + */ + if (!(append && *p_pm == NUL) && !filtering && perm >= 0 && dobackup) + { +#if defined(UNIX) || defined(WIN32) + stat_T st; +#endif + + if ((bkc & BKC_YES) || append) /* "yes" */ + backup_copy = TRUE; +#if defined(UNIX) || defined(WIN32) + else if ((bkc & BKC_AUTO)) /* "auto" */ + { + int i; + +# ifdef UNIX + /* + * Don't rename the file when: + * - it's a hard link + * - it's a symbolic link + * - we don't have write permission in the directory + * - we can't set the owner/group of the new file + */ + if (st_old.st_nlink > 1 + || mch_lstat((char *)fname, &st) < 0 + || st.st_dev != st_old.st_dev + || st.st_ino != st_old.st_ino +# ifndef HAVE_FCHOWN + || st.st_uid != st_old.st_uid + || st.st_gid != st_old.st_gid +# endif + ) + backup_copy = TRUE; + else +# else +# ifdef WIN32 + /* On NTFS file systems hard links are possible. */ + if (mch_is_linked(fname)) + backup_copy = TRUE; + else +# endif +# endif + { + /* + * Check if we can create a file and set the owner/group to + * the ones from the original file. + * First find a file name that doesn't exist yet (use some + * arbitrary numbers). + */ + STRCPY(IObuff, fname); + for (i = 4913; ; i += 123) + { + sprintf((char *)gettail(IObuff), "%d", i); + if (mch_lstat((char *)IObuff, &st) < 0) + break; + } + fd = mch_open((char *)IObuff, + O_CREAT|O_WRONLY|O_EXCL|O_NOFOLLOW, perm); + if (fd < 0) /* can't write in directory */ + backup_copy = TRUE; + else + { +# ifdef UNIX +# ifdef HAVE_FCHOWN + vim_ignored = fchown(fd, st_old.st_uid, st_old.st_gid); +# endif + if (mch_stat((char *)IObuff, &st) < 0 + || st.st_uid != st_old.st_uid + || st.st_gid != st_old.st_gid + || (long)st.st_mode != perm) + backup_copy = TRUE; +# endif + /* Close the file before removing it, on MS-Windows we + * can't delete an open file. */ + close(fd); + mch_remove(IObuff); +# ifdef MSWIN + /* MS-Windows may trigger a virus scanner to open the + * file, we can't delete it then. Keep trying for half a + * second. */ + { + int try; + + for (try = 0; try < 10; ++try) + { + if (mch_lstat((char *)IObuff, &st) < 0) + break; + ui_delay(50L, TRUE); /* wait 50 msec */ + mch_remove(IObuff); + } + } +# endif + } + } + } + + /* + * Break symlinks and/or hardlinks if we've been asked to. + */ + if ((bkc & BKC_BREAKSYMLINK) || (bkc & BKC_BREAKHARDLINK)) + { +# ifdef UNIX + int lstat_res; + + lstat_res = mch_lstat((char *)fname, &st); + + /* Symlinks. */ + if ((bkc & BKC_BREAKSYMLINK) + && lstat_res == 0 + && st.st_ino != st_old.st_ino) + backup_copy = FALSE; + + /* Hardlinks. */ + if ((bkc & BKC_BREAKHARDLINK) + && st_old.st_nlink > 1 + && (lstat_res != 0 || st.st_ino == st_old.st_ino)) + backup_copy = FALSE; +# else +# if defined(WIN32) + /* Symlinks. */ + if ((bkc & BKC_BREAKSYMLINK) && mch_is_symbolic_link(fname)) + backup_copy = FALSE; + + /* Hardlinks. */ + if ((bkc & BKC_BREAKHARDLINK) && mch_is_hard_link(fname)) + backup_copy = FALSE; +# endif +# endif + } + +#endif + + /* make sure we have a valid backup extension to use */ + if (*p_bex == NUL) + backup_ext = (char_u *)".bak"; + else + backup_ext = p_bex; + + if (backup_copy + && (fd = mch_open((char *)fname, O_RDONLY | O_EXTRA, 0)) >= 0) + { + int bfd; + char_u *copybuf, *wp; + int some_error = FALSE; + stat_T st_new; + char_u *dirp; + char_u *rootname; +#if defined(UNIX) || defined(WIN3264) + char_u *p; +#endif +#if defined(UNIX) + int did_set_shortname; + mode_t umask_save; +#endif + + copybuf = alloc(BUFSIZE + 1); + if (copybuf == NULL) + { + some_error = TRUE; /* out of memory */ + goto nobackup; + } + + /* + * Try to make the backup in each directory in the 'bdir' option. + * + * Unix semantics has it, that we may have a writable file, + * that cannot be recreated with a simple open(..., O_CREAT, ) e.g: + * - the directory is not writable, + * - the file may be a symbolic link, + * - the file may belong to another user/group, etc. + * + * For these reasons, the existing writable file must be truncated + * and reused. Creation of a backup COPY will be attempted. + */ + dirp = p_bdir; + while (*dirp) + { +#ifdef UNIX + st_new.st_ino = 0; + st_new.st_dev = 0; + st_new.st_gid = 0; +#endif + + /* + * Isolate one directory name, using an entry in 'bdir'. + */ + (void)copy_option_part(&dirp, copybuf, BUFSIZE, ","); + +#if defined(UNIX) || defined(WIN3264) + p = copybuf + STRLEN(copybuf); + if (after_pathsep(copybuf, p) && p[-1] == p[-2]) + // Ends with '//', use full path + if ((p = make_percent_swname(copybuf, fname)) != NULL) + { + backup = modname(p, backup_ext, FALSE); + vim_free(p); + } +#endif + rootname = get_file_in_dir(fname, copybuf); + if (rootname == NULL) + { + some_error = TRUE; /* out of memory */ + goto nobackup; + } + +#if defined(UNIX) + did_set_shortname = FALSE; +#endif + + /* + * May try twice if 'shortname' not set. + */ + for (;;) + { + /* + * Make the backup file name. + */ + if (backup == NULL) + backup = buf_modname((buf->b_p_sn || buf->b_shortname), + rootname, backup_ext, FALSE); + if (backup == NULL) + { + vim_free(rootname); + some_error = TRUE; /* out of memory */ + goto nobackup; + } + + /* + * Check if backup file already exists. + */ + if (mch_stat((char *)backup, &st_new) >= 0) + { +#ifdef UNIX + /* + * Check if backup file is same as original file. + * May happen when modname() gave the same file back. + * E.g. silly link, or file name-length reached. + * If we don't check here, we either ruin the file + * when copying or erase it after writing. jw. + */ + if (st_new.st_dev == st_old.st_dev + && st_new.st_ino == st_old.st_ino) + { + VIM_CLEAR(backup); /* no backup file to delete */ + /* + * may try again with 'shortname' set + */ + if (!(buf->b_shortname || buf->b_p_sn)) + { + buf->b_shortname = TRUE; + did_set_shortname = TRUE; + continue; + } + /* setting shortname didn't help */ + if (did_set_shortname) + buf->b_shortname = FALSE; + break; + } +#endif + + /* + * If we are not going to keep the backup file, don't + * delete an existing one, try to use another name. + * Change one character, just before the extension. + */ + if (!p_bk) + { + wp = backup + STRLEN(backup) - 1 + - STRLEN(backup_ext); + if (wp < backup) /* empty file name ??? */ + wp = backup; + *wp = 'z'; + while (*wp > 'a' + && mch_stat((char *)backup, &st_new) >= 0) + --*wp; + /* They all exist??? Must be something wrong. */ + if (*wp == 'a') + VIM_CLEAR(backup); + } + } + break; + } + vim_free(rootname); + + /* + * Try to create the backup file + */ + if (backup != NULL) + { + /* remove old backup, if present */ + mch_remove(backup); + /* Open with O_EXCL to avoid the file being created while + * we were sleeping (symlink hacker attack?). Reset umask + * if possible to avoid mch_setperm() below. */ +#ifdef UNIX + umask_save = umask(0); +#endif + bfd = mch_open((char *)backup, + O_WRONLY|O_CREAT|O_EXTRA|O_EXCL|O_NOFOLLOW, + perm & 0777); +#ifdef UNIX + (void)umask(umask_save); +#endif + if (bfd < 0) + VIM_CLEAR(backup); + else + { + /* Set file protection same as original file, but + * strip s-bit. Only needed if umask() wasn't used + * above. */ +#ifndef UNIX + (void)mch_setperm(backup, perm & 0777); +#else + /* + * Try to set the group of the backup same as the + * original file. If this fails, set the protection + * bits for the group same as the protection bits for + * others. + */ + if (st_new.st_gid != st_old.st_gid +# ifdef HAVE_FCHOWN /* sequent-ptx lacks fchown() */ + && fchown(bfd, (uid_t)-1, st_old.st_gid) != 0 +# endif + ) + mch_setperm(backup, + (perm & 0707) | ((perm & 07) << 3)); +# if defined(HAVE_SELINUX) || defined(HAVE_SMACK) + mch_copy_sec(fname, backup); +# endif +#endif + + /* + * copy the file. + */ + write_info.bw_fd = bfd; + write_info.bw_buf = copybuf; +#ifdef HAS_BW_FLAGS + write_info.bw_flags = FIO_NOCONVERT; +#endif + while ((write_info.bw_len = read_eintr(fd, copybuf, + BUFSIZE)) > 0) + { + if (buf_write_bytes(&write_info) == FAIL) + { + errmsg = (char_u *)_("E506: Can't write to backup file (add ! to override)"); + break; + } + ui_breakcheck(); + if (got_int) + { + errmsg = (char_u *)_(e_interr); + break; + } + } + + if (close(bfd) < 0 && errmsg == NULL) + errmsg = (char_u *)_("E507: Close error for backup file (add ! to override)"); + if (write_info.bw_len < 0) + errmsg = (char_u *)_("E508: Can't read file for backup (add ! to override)"); +#ifdef UNIX + set_file_time(backup, st_old.st_atime, st_old.st_mtime); +#endif +#ifdef HAVE_ACL + mch_set_acl(backup, acl); +#endif +#if defined(HAVE_SELINUX) || defined(HAVE_SMACK) + mch_copy_sec(fname, backup); +#endif + break; + } + } + } + nobackup: + close(fd); /* ignore errors for closing read file */ + vim_free(copybuf); + + if (backup == NULL && errmsg == NULL) + errmsg = (char_u *)_("E509: Cannot create backup file (add ! to override)"); + /* ignore errors when forceit is TRUE */ + if ((some_error || errmsg != NULL) && !forceit) + { + retval = FAIL; + goto fail; + } + errmsg = NULL; + } + else + { + char_u *dirp; + char_u *p; + char_u *rootname; + + /* + * Make a backup by renaming the original file. + */ + /* + * If 'cpoptions' includes the "W" flag, we don't want to + * overwrite a read-only file. But rename may be possible + * anyway, thus we need an extra check here. + */ + if (file_readonly && vim_strchr(p_cpo, CPO_FWRITE) != NULL) + { + errnum = (char_u *)"E504: "; + errmsg = (char_u *)_(err_readonly); + goto fail; + } + + /* + * + * Form the backup file name - change path/fo.o.h to + * path/fo.o.h.bak Try all directories in 'backupdir', first one + * that works is used. + */ + dirp = p_bdir; + while (*dirp) + { + /* + * Isolate one directory name and make the backup file name. + */ + (void)copy_option_part(&dirp, IObuff, IOSIZE, ","); + +#if defined(UNIX) || defined(WIN3264) + p = IObuff + STRLEN(IObuff); + if (after_pathsep(IObuff, p) && p[-1] == p[-2]) + // path ends with '//', use full path + if ((p = make_percent_swname(IObuff, fname)) != NULL) + { + backup = modname(p, backup_ext, FALSE); + vim_free(p); + } +#endif + if (backup == NULL) + { + rootname = get_file_in_dir(fname, IObuff); + if (rootname == NULL) + backup = NULL; + else + { + backup = buf_modname( + (buf->b_p_sn || buf->b_shortname), + rootname, backup_ext, FALSE); + vim_free(rootname); + } + } + + if (backup != NULL) + { + /* + * If we are not going to keep the backup file, don't + * delete an existing one, try to use another name. + * Change one character, just before the extension. + */ + if (!p_bk && mch_getperm(backup) >= 0) + { + p = backup + STRLEN(backup) - 1 - STRLEN(backup_ext); + if (p < backup) /* empty file name ??? */ + p = backup; + *p = 'z'; + while (*p > 'a' && mch_getperm(backup) >= 0) + --*p; + /* They all exist??? Must be something wrong! */ + if (*p == 'a') + VIM_CLEAR(backup); + } + } + if (backup != NULL) + { + /* + * Delete any existing backup and move the current version + * to the backup. For safety, we don't remove the backup + * until the write has finished successfully. And if the + * 'backup' option is set, leave it around. + */ + /* + * If the renaming of the original file to the backup file + * works, quit here. + */ + if (vim_rename(fname, backup) == 0) + break; + + VIM_CLEAR(backup); /* don't do the rename below */ + } + } + if (backup == NULL && !forceit) + { + errmsg = (char_u *)_("E510: Can't make backup file (add ! to override)"); + goto fail; + } + } + } + +#if defined(UNIX) + /* When using ":w!" and the file was read-only: make it writable */ + if (forceit && perm >= 0 && !(perm & 0200) && st_old.st_uid == getuid() + && vim_strchr(p_cpo, CPO_FWRITE) == NULL) + { + perm |= 0200; + (void)mch_setperm(fname, perm); + made_writable = TRUE; + } +#endif + + /* When using ":w!" and writing to the current file, 'readonly' makes no + * sense, reset it, unless 'Z' appears in 'cpoptions'. */ + if (forceit && overwriting && vim_strchr(p_cpo, CPO_KEEPRO) == NULL) + { + buf->b_p_ro = FALSE; +#ifdef FEAT_TITLE + need_maketitle = TRUE; /* set window title later */ +#endif + status_redraw_all(); /* redraw status lines later */ + } + + if (end > buf->b_ml.ml_line_count) + end = buf->b_ml.ml_line_count; + if (buf->b_ml.ml_flags & ML_EMPTY) + start = end + 1; + + /* + * If the original file is being overwritten, there is a small chance that + * we crash in the middle of writing. Therefore the file is preserved now. + * This makes all block numbers positive so that recovery does not need + * the original file. + * Don't do this if there is a backup file and we are exiting. + */ + if (reset_changed && !newfile && overwriting + && !(exiting && backup != NULL)) + { + ml_preserve(buf, FALSE); + if (got_int) + { + errmsg = (char_u *)_(e_interr); + goto restore_backup; + } + } + +#ifdef VMS + vms_remove_version(fname); /* remove version */ +#endif + /* Default: write the file directly. May write to a temp file for + * multi-byte conversion. */ + wfname = fname; + + /* Check for forced 'fileencoding' from "++opt=val" argument. */ + if (eap != NULL && eap->force_enc != 0) + { + fenc = eap->cmd + eap->force_enc; + fenc = enc_canonize(fenc); + fenc_tofree = fenc; + } + else + fenc = buf->b_p_fenc; + + /* + * Check if the file needs to be converted. + */ + converted = need_conversion(fenc); + + /* + * Check if UTF-8 to UCS-2/4 or Latin1 conversion needs to be done. Or + * Latin1 to Unicode conversion. This is handled in buf_write_bytes(). + * Prepare the flags for it and allocate bw_conv_buf when needed. + */ + if (converted && (enc_utf8 || STRCMP(p_enc, "latin1") == 0)) + { + wb_flags = get_fio_flags(fenc); + if (wb_flags & (FIO_UCS2 | FIO_UCS4 | FIO_UTF16 | FIO_UTF8)) + { + /* Need to allocate a buffer to translate into. */ + if (wb_flags & (FIO_UCS2 | FIO_UTF16 | FIO_UTF8)) + write_info.bw_conv_buflen = bufsize * 2; + else /* FIO_UCS4 */ + write_info.bw_conv_buflen = bufsize * 4; + write_info.bw_conv_buf + = lalloc((long_u)write_info.bw_conv_buflen, TRUE); + if (write_info.bw_conv_buf == NULL) + end = 0; + } + } + +#ifdef WIN3264 + if (converted && wb_flags == 0 && (wb_flags = get_win_fio_flags(fenc)) != 0) + { + /* Convert UTF-8 -> UCS-2 and UCS-2 -> DBCS. Worst-case * 4: */ + write_info.bw_conv_buflen = bufsize * 4; + write_info.bw_conv_buf + = lalloc((long_u)write_info.bw_conv_buflen, TRUE); + if (write_info.bw_conv_buf == NULL) + end = 0; + } +#endif + +#ifdef MACOS_CONVERT + if (converted && wb_flags == 0 && (wb_flags = get_mac_fio_flags(fenc)) != 0) + { + write_info.bw_conv_buflen = bufsize * 3; + write_info.bw_conv_buf + = lalloc((long_u)write_info.bw_conv_buflen, TRUE); + if (write_info.bw_conv_buf == NULL) + end = 0; + } +#endif + +#if defined(FEAT_EVAL) || defined(USE_ICONV) + if (converted && wb_flags == 0) + { +# ifdef USE_ICONV + /* + * Use iconv() conversion when conversion is needed and it's not done + * internally. + */ + write_info.bw_iconv_fd = (iconv_t)my_iconv_open(fenc, + enc_utf8 ? (char_u *)"utf-8" : p_enc); + if (write_info.bw_iconv_fd != (iconv_t)-1) + { + /* We're going to use iconv(), allocate a buffer to convert in. */ + write_info.bw_conv_buflen = bufsize * ICONV_MULT; + write_info.bw_conv_buf + = lalloc((long_u)write_info.bw_conv_buflen, TRUE); + if (write_info.bw_conv_buf == NULL) + end = 0; + write_info.bw_first = TRUE; + } +# ifdef FEAT_EVAL + else +# endif +# endif + +# ifdef FEAT_EVAL + /* + * When the file needs to be converted with 'charconvert' after + * writing, write to a temp file instead and let the conversion + * overwrite the original file. + */ + if (*p_ccv != NUL) + { + wfname = vim_tempname('w', FALSE); + if (wfname == NULL) /* Can't write without a tempfile! */ + { + errmsg = (char_u *)_("E214: Can't find temp file for writing"); + goto restore_backup; + } + } +# endif + } +#endif + if (converted && wb_flags == 0 +#ifdef USE_ICONV + && write_info.bw_iconv_fd == (iconv_t)-1 +# endif +# ifdef FEAT_EVAL + && wfname == fname +# endif + ) + { + if (!forceit) + { + errmsg = (char_u *)_("E213: Cannot convert (add ! to write without conversion)"); + goto restore_backup; + } + notconverted = TRUE; + } + + /* + * If conversion is taking place, we may first pretend to write and check + * for conversion errors. Then loop again to write for real. + * When not doing conversion this writes for real right away. + */ + for (checking_conversion = TRUE; ; checking_conversion = FALSE) + { + /* + * There is no need to check conversion when: + * - there is no conversion + * - we make a backup file, that can be restored in case of conversion + * failure. + */ + if (!converted || dobackup) + checking_conversion = FALSE; + + if (checking_conversion) + { + /* Make sure we don't write anything. */ + fd = -1; + write_info.bw_fd = fd; + } + else + { +#ifdef HAVE_FTRUNCATE +# define TRUNC_ON_OPEN 0 +#else +# define TRUNC_ON_OPEN O_TRUNC +#endif + /* + * Open the file "wfname" for writing. + * We may try to open the file twice: If we can't write to the file + * and forceit is TRUE we delete the existing file and try to + * create a new one. If this still fails we may have lost the + * original file! (this may happen when the user reached his + * quotum for number of files). + * Appending will fail if the file does not exist and forceit is + * FALSE. + */ + while ((fd = mch_open((char *)wfname, O_WRONLY | O_EXTRA | (append + ? (forceit ? (O_APPEND | O_CREAT) : O_APPEND) + : (O_CREAT | TRUNC_ON_OPEN)) + , perm < 0 ? 0666 : (perm & 0777))) < 0) + { + /* + * A forced write will try to create a new file if the old one + * is still readonly. This may also happen when the directory + * is read-only. In that case the mch_remove() will fail. + */ + if (errmsg == NULL) + { +#ifdef UNIX + stat_T st; + + /* Don't delete the file when it's a hard or symbolic link. + */ + if ((!newfile && st_old.st_nlink > 1) + || (mch_lstat((char *)fname, &st) == 0 + && (st.st_dev != st_old.st_dev + || st.st_ino != st_old.st_ino))) + errmsg = (char_u *)_("E166: Can't open linked file for writing"); + else +#endif + { + errmsg = (char_u *)_("E212: Can't open file for writing"); + if (forceit && vim_strchr(p_cpo, CPO_FWRITE) == NULL + && perm >= 0) + { +#ifdef UNIX + /* we write to the file, thus it should be marked + writable after all */ + if (!(perm & 0200)) + made_writable = TRUE; + perm |= 0200; + if (st_old.st_uid != getuid() + || st_old.st_gid != getgid()) + perm &= 0777; +#endif + if (!append) /* don't remove when appending */ + mch_remove(wfname); + continue; + } + } + } + +restore_backup: + { + stat_T st; + + /* + * If we failed to open the file, we don't need a backup. + * Throw it away. If we moved or removed the original file + * try to put the backup in its place. + */ + if (backup != NULL && wfname == fname) + { + if (backup_copy) + { + /* + * There is a small chance that we removed the + * original, try to move the copy in its place. + * This may not work if the vim_rename() fails. + * In that case we leave the copy around. + */ + /* If file does not exist, put the copy in its + * place */ + if (mch_stat((char *)fname, &st) < 0) + vim_rename(backup, fname); + /* if original file does exist throw away the copy + */ + if (mch_stat((char *)fname, &st) >= 0) + mch_remove(backup); + } + else + { + /* try to put the original file back */ + vim_rename(backup, fname); + } + } + + /* if original file no longer exists give an extra warning + */ + if (!newfile && mch_stat((char *)fname, &st) < 0) + end = 0; + } + + if (wfname != fname) + vim_free(wfname); + goto fail; + } + write_info.bw_fd = fd; + +#if defined(UNIX) + { + stat_T st; + + /* Double check we are writing the intended file before making + * any changes. */ + if (overwriting + && (!dobackup || backup_copy) + && fname == wfname + && perm >= 0 + && mch_fstat(fd, &st) == 0 + && st.st_ino != st_old.st_ino) + { + close(fd); + errmsg = (char_u *)_("E949: File changed while writing"); + goto fail; + } + } +#endif +#ifdef HAVE_FTRUNCATE + if (!append) + vim_ignored = ftruncate(fd, (off_t)0); +#endif + +#if defined(WIN3264) + if (backup != NULL && overwriting && !append) + { + if (backup_copy) + (void)mch_copy_file_attribute(wfname, backup); + else + (void)mch_copy_file_attribute(backup, wfname); + } + + if (!overwriting && !append) + { + if (buf->b_ffname != NULL) + (void)mch_copy_file_attribute(buf->b_ffname, wfname); + /* Should copy resource fork */ + } +#endif + +#ifdef FEAT_CRYPT + if (*buf->b_p_key != NUL && !filtering) + { + char_u *header; + int header_len; + + buf->b_cryptstate = crypt_create_for_writing( + crypt_get_method_nr(buf), + buf->b_p_key, &header, &header_len); + if (buf->b_cryptstate == NULL || header == NULL) + end = 0; + else + { + /* Write magic number, so that Vim knows how this file is + * encrypted when reading it back. */ + write_info.bw_buf = header; + write_info.bw_len = header_len; + write_info.bw_flags = FIO_NOCONVERT; + if (buf_write_bytes(&write_info) == FAIL) + end = 0; + wb_flags |= FIO_ENCRYPTED; + vim_free(header); + } + } +#endif + } + errmsg = NULL; + + write_info.bw_buf = buffer; + nchars = 0; + + /* use "++bin", "++nobin" or 'binary' */ + if (eap != NULL && eap->force_bin != 0) + write_bin = (eap->force_bin == FORCE_BIN); + else + write_bin = buf->b_p_bin; + + /* + * The BOM is written just after the encryption magic number. + * Skip it when appending and the file already existed, the BOM only + * makes sense at the start of the file. + */ + if (buf->b_p_bomb && !write_bin && (!append || perm < 0)) + { + write_info.bw_len = make_bom(buffer, fenc); + if (write_info.bw_len > 0) + { + /* don't convert, do encryption */ + write_info.bw_flags = FIO_NOCONVERT | wb_flags; + if (buf_write_bytes(&write_info) == FAIL) + end = 0; + else + nchars += write_info.bw_len; + } + } + write_info.bw_start_lnum = start; + +#ifdef FEAT_PERSISTENT_UNDO + write_undo_file = (buf->b_p_udf + && overwriting + && !append + && !filtering + && reset_changed + && !checking_conversion); + if (write_undo_file) + /* Prepare for computing the hash value of the text. */ + sha256_start(&sha_ctx); +#endif + + write_info.bw_len = bufsize; +#ifdef HAS_BW_FLAGS + write_info.bw_flags = wb_flags; +#endif + fileformat = get_fileformat_force(buf, eap); + s = buffer; + len = 0; + for (lnum = start; lnum <= end; ++lnum) + { + /* + * The next while loop is done once for each character written. + * Keep it fast! + */ + ptr = ml_get_buf(buf, lnum, FALSE) - 1; +#ifdef FEAT_PERSISTENT_UNDO + if (write_undo_file) + sha256_update(&sha_ctx, ptr + 1, + (UINT32_T)(STRLEN(ptr + 1) + 1)); +#endif + while ((c = *++ptr) != NUL) + { + if (c == NL) + *s = NUL; /* replace newlines with NULs */ + else if (c == CAR && fileformat == EOL_MAC) + *s = NL; /* Mac: replace CRs with NLs */ + else + *s = c; + ++s; + if (++len != bufsize) + continue; + if (buf_write_bytes(&write_info) == FAIL) + { + end = 0; /* write error: break loop */ + break; + } + nchars += bufsize; + s = buffer; + len = 0; + write_info.bw_start_lnum = lnum; + } + /* write failed or last line has no EOL: stop here */ + if (end == 0 + || (lnum == end + && (write_bin || !buf->b_p_fixeol) + && (lnum == buf->b_no_eol_lnum + || (lnum == buf->b_ml.ml_line_count + && !buf->b_p_eol)))) + { + ++lnum; /* written the line, count it */ + no_eol = TRUE; + break; + } + if (fileformat == EOL_UNIX) + *s++ = NL; + else + { + *s++ = CAR; /* EOL_MAC or EOL_DOS: write CR */ + if (fileformat == EOL_DOS) /* write CR-NL */ + { + if (++len == bufsize) + { + if (buf_write_bytes(&write_info) == FAIL) + { + end = 0; /* write error: break loop */ + break; + } + nchars += bufsize; + s = buffer; + len = 0; + } + *s++ = NL; + } + } + if (++len == bufsize && end) + { + if (buf_write_bytes(&write_info) == FAIL) + { + end = 0; /* write error: break loop */ + break; + } + nchars += bufsize; + s = buffer; + len = 0; + + ui_breakcheck(); + if (got_int) + { + end = 0; /* Interrupted, break loop */ + break; + } + } +#ifdef VMS + /* + * On VMS there is a problem: newlines get added when writing + * blocks at a time. Fix it by writing a line at a time. + * This is much slower! + * Explanation: VAX/DECC RTL insists that records in some RMS + * structures end with a newline (carriage return) character, and + * if they don't it adds one. + * With other RMS structures it works perfect without this fix. + */ + if (buf->b_fab_rfm == FAB$C_VFC + || ((buf->b_fab_rat & (FAB$M_FTN | FAB$M_CR)) != 0)) + { + int b2write; + + buf->b_fab_mrs = (buf->b_fab_mrs == 0 + ? MIN(4096, bufsize) + : MIN(buf->b_fab_mrs, bufsize)); + + b2write = len; + while (b2write > 0) + { + write_info.bw_len = MIN(b2write, buf->b_fab_mrs); + if (buf_write_bytes(&write_info) == FAIL) + { + end = 0; + break; + } + b2write -= MIN(b2write, buf->b_fab_mrs); + } + write_info.bw_len = bufsize; + nchars += len; + s = buffer; + len = 0; + } +#endif + } + if (len > 0 && end > 0) + { + write_info.bw_len = len; + if (buf_write_bytes(&write_info) == FAIL) + end = 0; /* write error */ + nchars += len; + } + + /* Stop when writing done or an error was encountered. */ + if (!checking_conversion || end == 0) + break; + + /* If no error happened until now, writing should be ok, so loop to + * really write the buffer. */ + } + + /* If we started writing, finish writing. Also when an error was + * encountered. */ + if (!checking_conversion) + { +#if defined(UNIX) && defined(HAVE_FSYNC) + /* + * On many journalling file systems there is a bug that causes both the + * original and the backup file to be lost when halting the system + * right after writing the file. That's because only the meta-data is + * journalled. Syncing the file slows down the system, but assures it + * has been written to disk and we don't lose it. + * For a device do try the fsync() but don't complain if it does not + * work (could be a pipe). + * If the 'fsync' option is FALSE, don't fsync(). Useful for laptops. + */ + if (p_fs && fsync(fd) != 0 && !device) + { + errmsg = (char_u *)_(e_fsync); + end = 0; + } +#endif + +#if defined(HAVE_SELINUX) || defined(HAVE_SMACK) + /* Probably need to set the security context. */ + if (!backup_copy) + mch_copy_sec(backup, wfname); +#endif + +#ifdef UNIX + /* When creating a new file, set its owner/group to that of the + * original file. Get the new device and inode number. */ + if (backup != NULL && !backup_copy) + { +# ifdef HAVE_FCHOWN + stat_T st; + + /* Don't change the owner when it's already OK, some systems remove + * permission or ACL stuff. */ + if (mch_stat((char *)wfname, &st) < 0 + || st.st_uid != st_old.st_uid + || st.st_gid != st_old.st_gid) + { + /* changing owner might not be possible */ + vim_ignored = fchown(fd, st_old.st_uid, -1); + /* if changing group fails clear the group permissions */ + if (fchown(fd, -1, st_old.st_gid) == -1 && perm > 0) + perm &= ~070; + } +# endif + buf_setino(buf); + } + else if (!buf->b_dev_valid) + /* Set the inode when creating a new file. */ + buf_setino(buf); +#endif + +#ifdef UNIX + if (made_writable) + perm &= ~0200; /* reset 'w' bit for security reasons */ +#endif +#ifdef HAVE_FCHMOD + /* set permission of new file same as old file */ + if (perm >= 0) + (void)mch_fsetperm(fd, perm); +#endif + if (close(fd) != 0) + { + errmsg = (char_u *)_("E512: Close failed"); + end = 0; + } + +#ifndef HAVE_FCHMOD + /* set permission of new file same as old file */ + if (perm >= 0) + (void)mch_setperm(wfname, perm); +#endif +#ifdef HAVE_ACL + /* + * Probably need to set the ACL before changing the user (can't set the + * ACL on a file the user doesn't own). + * On Solaris, with ZFS and the aclmode property set to "discard" (the + * default), chmod() discards all part of a file's ACL that don't + * represent the mode of the file. It's non-trivial for us to discover + * whether we're in that situation, so we simply always re-set the ACL. + */ +# ifndef HAVE_SOLARIS_ZFS_ACL + if (!backup_copy) +# endif + mch_set_acl(wfname, acl); +#endif +#ifdef FEAT_CRYPT + if (buf->b_cryptstate != NULL) + { + crypt_free_state(buf->b_cryptstate); + buf->b_cryptstate = NULL; + } +#endif + +#if defined(FEAT_EVAL) + if (wfname != fname) + { + /* + * The file was written to a temp file, now it needs to be + * converted with 'charconvert' to (overwrite) the output file. + */ + if (end != 0) + { + if (eval_charconvert(enc_utf8 ? (char_u *)"utf-8" : p_enc, + fenc, wfname, fname) == FAIL) + { + write_info.bw_conv_error = TRUE; + end = 0; + } + } + mch_remove(wfname); + vim_free(wfname); + } +#endif + } + + if (end == 0) + { + /* + * Error encountered. + */ + if (errmsg == NULL) + { + if (write_info.bw_conv_error) + { + if (write_info.bw_conv_error_lnum == 0) + errmsg = (char_u *)_("E513: write error, conversion failed (make 'fenc' empty to override)"); + else + { + errmsg_allocated = TRUE; + errmsg = alloc(300); + vim_snprintf((char *)errmsg, 300, _("E513: write error, conversion failed in line %ld (make 'fenc' empty to override)"), + (long)write_info.bw_conv_error_lnum); + } + } + else if (got_int) + errmsg = (char_u *)_(e_interr); + else + errmsg = (char_u *)_("E514: write error (file system full?)"); + } + + /* + * If we have a backup file, try to put it in place of the new file, + * because the new file is probably corrupt. This avoids losing the + * original file when trying to make a backup when writing the file a + * second time. + * When "backup_copy" is set we need to copy the backup over the new + * file. Otherwise rename the backup file. + * If this is OK, don't give the extra warning message. + */ + if (backup != NULL) + { + if (backup_copy) + { + /* This may take a while, if we were interrupted let the user + * know we got the message. */ + if (got_int) + { + msg(_(e_interr)); + out_flush(); + } + if ((fd = mch_open((char *)backup, O_RDONLY | O_EXTRA, 0)) >= 0) + { + if ((write_info.bw_fd = mch_open((char *)fname, + O_WRONLY | O_CREAT | O_TRUNC | O_EXTRA, + perm & 0777)) >= 0) + { + /* copy the file. */ + write_info.bw_buf = smallbuf; +#ifdef HAS_BW_FLAGS + write_info.bw_flags = FIO_NOCONVERT; +#endif + while ((write_info.bw_len = read_eintr(fd, smallbuf, + SMBUFSIZE)) > 0) + if (buf_write_bytes(&write_info) == FAIL) + break; + + if (close(write_info.bw_fd) >= 0 + && write_info.bw_len == 0) + end = 1; /* success */ + } + close(fd); /* ignore errors for closing read file */ + } + } + else + { + if (vim_rename(backup, fname) == 0) + end = 1; + } + } + goto fail; + } + + lnum -= start; /* compute number of written lines */ + --no_wait_return; /* may wait for return now */ + +#if !(defined(UNIX) || defined(VMS)) + fname = sfname; /* use shortname now, for the messages */ +#endif + if (!filtering) + { + msg_add_fname(buf, fname); /* put fname in IObuff with quotes */ + c = FALSE; + if (write_info.bw_conv_error) + { + STRCAT(IObuff, _(" CONVERSION ERROR")); + c = TRUE; + if (write_info.bw_conv_error_lnum != 0) + vim_snprintf_add((char *)IObuff, IOSIZE, _(" in line %ld;"), + (long)write_info.bw_conv_error_lnum); + } + else if (notconverted) + { + STRCAT(IObuff, _("[NOT converted]")); + c = TRUE; + } + else if (converted) + { + STRCAT(IObuff, _("[converted]")); + c = TRUE; + } + if (device) + { + STRCAT(IObuff, _("[Device]")); + c = TRUE; + } + else if (newfile) + { + STRCAT(IObuff, shortmess(SHM_NEW) ? _("[New]") : _("[New File]")); + c = TRUE; + } + if (no_eol) + { + msg_add_eol(); + c = TRUE; + } + /* may add [unix/dos/mac] */ + if (msg_add_fileformat(fileformat)) + c = TRUE; +#ifdef FEAT_CRYPT + if (wb_flags & FIO_ENCRYPTED) + { + crypt_append_msg(buf); + c = TRUE; + } +#endif + msg_add_lines(c, (long)lnum, nchars); /* add line/char count */ + if (!shortmess(SHM_WRITE)) + { + if (append) + STRCAT(IObuff, shortmess(SHM_WRI) ? _(" [a]") : _(" appended")); + else + STRCAT(IObuff, shortmess(SHM_WRI) ? _(" [w]") : _(" written")); + } + + set_keep_msg((char_u *)msg_trunc_attr((char *)IObuff, FALSE, 0), 0); + } + + /* When written everything correctly: reset 'modified'. Unless not + * writing to the original file and '+' is not in 'cpoptions'. */ + if (reset_changed && whole && !append + && !write_info.bw_conv_error + && (overwriting || vim_strchr(p_cpo, CPO_PLUS) != NULL)) + { + unchanged(buf, TRUE); + /* b:changedtick is always incremented in unchanged() but that + * should not trigger a TextChanged event. */ + if (buf->b_last_changedtick + 1 == CHANGEDTICK(buf)) + buf->b_last_changedtick = CHANGEDTICK(buf); + u_unchanged(buf); + u_update_save_nr(buf); + } + + /* + * If written to the current file, update the timestamp of the swap file + * and reset the BF_WRITE_MASK flags. Also sets buf->b_mtime. + */ + if (overwriting) + { + ml_timestamp(buf); + if (append) + buf->b_flags &= ~BF_NEW; + else + buf->b_flags &= ~BF_WRITE_MASK; + } + + /* + * If we kept a backup until now, and we are in patch mode, then we make + * the backup file our 'original' file. + */ + if (*p_pm && dobackup) + { + char *org = (char *)buf_modname((buf->b_p_sn || buf->b_shortname), + fname, p_pm, FALSE); + + if (backup != NULL) + { + stat_T st; + + /* + * If the original file does not exist yet + * the current backup file becomes the original file + */ + if (org == NULL) + emsg(_("E205: Patchmode: can't save original file")); + else if (mch_stat(org, &st) < 0) + { + vim_rename(backup, (char_u *)org); + VIM_CLEAR(backup); /* don't delete the file */ +#ifdef UNIX + set_file_time((char_u *)org, st_old.st_atime, st_old.st_mtime); +#endif + } + } + /* + * If there is no backup file, remember that a (new) file was + * created. + */ + else + { + int empty_fd; + + if (org == NULL + || (empty_fd = mch_open(org, + O_CREAT | O_EXTRA | O_EXCL | O_NOFOLLOW, + perm < 0 ? 0666 : (perm & 0777))) < 0) + emsg(_("E206: patchmode: can't touch empty original file")); + else + close(empty_fd); + } + if (org != NULL) + { + mch_setperm((char_u *)org, mch_getperm(fname) & 0777); + vim_free(org); + } + } + + /* + * Remove the backup unless 'backup' option is set + */ + if (!p_bk && backup != NULL && mch_remove(backup) != 0) + emsg(_("E207: Can't delete backup file")); + + goto nofail; + + /* + * Finish up. We get here either after failure or success. + */ +fail: + --no_wait_return; /* may wait for return now */ +nofail: + + /* Done saving, we accept changed buffer warnings again */ + buf->b_saving = FALSE; + + vim_free(backup); + if (buffer != smallbuf) + vim_free(buffer); + vim_free(fenc_tofree); + vim_free(write_info.bw_conv_buf); +#ifdef USE_ICONV + if (write_info.bw_iconv_fd != (iconv_t)-1) + { + iconv_close(write_info.bw_iconv_fd); + write_info.bw_iconv_fd = (iconv_t)-1; + } +#endif +#ifdef HAVE_ACL + mch_free_acl(acl); +#endif + + if (errmsg != NULL) + { + int numlen = errnum != NULL ? (int)STRLEN(errnum) : 0; + + attr = HL_ATTR(HLF_E); /* set highlight for error messages */ + msg_add_fname(buf, +#ifndef UNIX + sfname +#else + fname +#endif + ); /* put file name in IObuff with quotes */ + if (STRLEN(IObuff) + STRLEN(errmsg) + numlen >= IOSIZE) + IObuff[IOSIZE - STRLEN(errmsg) - numlen - 1] = NUL; + /* If the error message has the form "is ...", put the error number in + * front of the file name. */ + if (errnum != NULL) + { + STRMOVE(IObuff + numlen, IObuff); + mch_memmove(IObuff, errnum, (size_t)numlen); + } + STRCAT(IObuff, errmsg); + emsg((char *)IObuff); + if (errmsg_allocated) + vim_free(errmsg); + + retval = FAIL; + if (end == 0) + { + msg_puts_attr(_("\nWARNING: Original file may be lost or damaged\n"), + attr | MSG_HIST); + msg_puts_attr(_("don't quit the editor until the file is successfully written!"), + attr | MSG_HIST); + + /* Update the timestamp to avoid an "overwrite changed file" + * prompt when writing again. */ + if (mch_stat((char *)fname, &st_old) >= 0) + { + buf_store_time(buf, &st_old, fname); + buf->b_mtime_read = buf->b_mtime; + } + } + } + msg_scroll = msg_save; + +#ifdef FEAT_PERSISTENT_UNDO + /* + * When writing the whole file and 'undofile' is set, also write the undo + * file. + */ + if (retval == OK && write_undo_file) + { + char_u hash[UNDO_HASH_SIZE]; + + sha256_finish(&sha_ctx, hash); + u_write_undo(NULL, FALSE, buf, hash); + } +#endif + +#ifdef FEAT_EVAL + if (!should_abort(retval)) +#else + if (!got_int) +#endif + { + aco_save_T aco; + + curbuf->b_no_eol_lnum = 0; /* in case it was set by the previous read */ + + /* + * Apply POST autocommands. + * Careful: The autocommands may call buf_write() recursively! + */ + aucmd_prepbuf(&aco, buf); + + if (append) + apply_autocmds_exarg(EVENT_FILEAPPENDPOST, fname, fname, + FALSE, curbuf, eap); + else if (filtering) + apply_autocmds_exarg(EVENT_FILTERWRITEPOST, NULL, fname, + FALSE, curbuf, eap); + else if (reset_changed && whole) + apply_autocmds_exarg(EVENT_BUFWRITEPOST, fname, fname, + FALSE, curbuf, eap); + else + apply_autocmds_exarg(EVENT_FILEWRITEPOST, fname, fname, + FALSE, curbuf, eap); + + /* restore curwin/curbuf and a few other things */ + aucmd_restbuf(&aco); + +#ifdef FEAT_EVAL + if (aborting()) /* autocmds may abort script processing */ + retval = FALSE; +#endif + } + + got_int |= prev_got_int; + + return retval; +} + +/* + * Set the name of the current buffer. Use when the buffer doesn't have a + * name and a ":r" or ":w" command with a file name is used. + */ + static int +set_rw_fname(char_u *fname, char_u *sfname) +{ + buf_T *buf = curbuf; + + /* It's like the unnamed buffer is deleted.... */ + if (curbuf->b_p_bl) + apply_autocmds(EVENT_BUFDELETE, NULL, NULL, FALSE, curbuf); + apply_autocmds(EVENT_BUFWIPEOUT, NULL, NULL, FALSE, curbuf); +#ifdef FEAT_EVAL + if (aborting()) /* autocmds may abort script processing */ + return FAIL; +#endif + if (curbuf != buf) + { + /* We are in another buffer now, don't do the renaming. */ + emsg(_(e_auchangedbuf)); + return FAIL; + } + + if (setfname(curbuf, fname, sfname, FALSE) == OK) + curbuf->b_flags |= BF_NOTEDITED; + + /* ....and a new named one is created */ + apply_autocmds(EVENT_BUFNEW, NULL, NULL, FALSE, curbuf); + if (curbuf->b_p_bl) + apply_autocmds(EVENT_BUFADD, NULL, NULL, FALSE, curbuf); +#ifdef FEAT_EVAL + if (aborting()) /* autocmds may abort script processing */ + return FAIL; +#endif + + /* Do filetype detection now if 'filetype' is empty. */ + if (*curbuf->b_p_ft == NUL) + { + if (au_has_group((char_u *)"filetypedetect")) + (void)do_doautocmd((char_u *)"filetypedetect BufRead", FALSE, NULL); + do_modelines(0); + } + + return OK; +} + +/* + * Put file name into IObuff with quotes. + */ + void +msg_add_fname(buf_T *buf, char_u *fname) +{ + if (fname == NULL) + fname = (char_u *)"-stdin-"; + home_replace(buf, fname, IObuff + 1, IOSIZE - 4, TRUE); + IObuff[0] = '"'; + STRCAT(IObuff, "\" "); +} + +/* + * Append message for text mode to IObuff. + * Return TRUE if something appended. + */ + static int +msg_add_fileformat(int eol_type) +{ +#ifndef USE_CRNL + if (eol_type == EOL_DOS) + { + STRCAT(IObuff, shortmess(SHM_TEXT) ? _("[dos]") : _("[dos format]")); + return TRUE; + } +#endif +#ifndef USE_CR + if (eol_type == EOL_MAC) + { + STRCAT(IObuff, shortmess(SHM_TEXT) ? _("[mac]") : _("[mac format]")); + return TRUE; + } +#endif +#if defined(USE_CRNL) || defined(USE_CR) + if (eol_type == EOL_UNIX) + { + STRCAT(IObuff, shortmess(SHM_TEXT) ? _("[unix]") : _("[unix format]")); + return TRUE; + } +#endif + return FALSE; +} + +/* + * Append line and character count to IObuff. + */ + void +msg_add_lines( + int insert_space, + long lnum, + off_T nchars) +{ + char_u *p; + + p = IObuff + STRLEN(IObuff); + + if (insert_space) + *p++ = ' '; + if (shortmess(SHM_LINES)) + vim_snprintf((char *)p, IOSIZE - (p - IObuff), + "%ldL, %lldC", lnum, (long_long_T)nchars); + else + { + sprintf((char *)p, NGETTEXT("%ld line, ", "%ld lines, ", lnum), lnum); + p += STRLEN(p); + vim_snprintf((char *)p, IOSIZE - (p - IObuff), + NGETTEXT("%lld character", "%lld characters", nchars), + (long_long_T)nchars); + } +} + +/* + * Append message for missing line separator to IObuff. + */ + static void +msg_add_eol(void) +{ + STRCAT(IObuff, shortmess(SHM_LAST) ? _("[noeol]") : _("[Incomplete last line]")); +} + +/* + * Check modification time of file, before writing to it. + * The size isn't checked, because using a tool like "gzip" takes care of + * using the same timestamp but can't set the size. + */ + static int +check_mtime(buf_T *buf, stat_T *st) +{ + if (buf->b_mtime_read != 0 + && time_differs((long)st->st_mtime, buf->b_mtime_read)) + { + msg_scroll = TRUE; /* don't overwrite messages here */ + msg_silent = 0; /* must give this prompt */ + /* don't use emsg() here, don't want to flush the buffers */ + msg_attr(_("WARNING: The file has been changed since reading it!!!"), + HL_ATTR(HLF_E)); + if (ask_yesno((char_u *)_("Do you really want to write to it"), + TRUE) == 'n') + return FAIL; + msg_scroll = FALSE; /* always overwrite the file message now */ + } + return OK; +} + + static int +time_differs(long t1, long t2) +{ +#if defined(__linux__) || defined(MSWIN) + /* On a FAT filesystem, esp. under Linux, there are only 5 bits to store + * the seconds. Since the roundoff is done when flushing the inode, the + * time may change unexpectedly by one second!!! */ + return (t1 - t2 > 1 || t2 - t1 > 1); +#else + return (t1 != t2); +#endif +} + +/* + * Call write() to write a number of bytes to the file. + * Handles encryption and 'encoding' conversion. + * + * Return FAIL for failure, OK otherwise. + */ + static int +buf_write_bytes(struct bw_info *ip) +{ + int wlen; + char_u *buf = ip->bw_buf; /* data to write */ + int len = ip->bw_len; /* length of data */ +#ifdef HAS_BW_FLAGS + int flags = ip->bw_flags; /* extra flags */ +#endif + + /* + * Skip conversion when writing the crypt magic number or the BOM. + */ + if (!(flags & FIO_NOCONVERT)) + { + char_u *p; + unsigned c; + int n; + + if (flags & FIO_UTF8) + { + /* + * Convert latin1 in the buffer to UTF-8 in the file. + */ + p = ip->bw_conv_buf; /* translate to buffer */ + for (wlen = 0; wlen < len; ++wlen) + p += utf_char2bytes(buf[wlen], p); + buf = ip->bw_conv_buf; + len = (int)(p - ip->bw_conv_buf); + } + else if (flags & (FIO_UCS4 | FIO_UTF16 | FIO_UCS2 | FIO_LATIN1)) + { + /* + * Convert UTF-8 bytes in the buffer to UCS-2, UCS-4, UTF-16 or + * Latin1 chars in the file. + */ + if (flags & FIO_LATIN1) + p = buf; /* translate in-place (can only get shorter) */ + else + p = ip->bw_conv_buf; /* translate to buffer */ + for (wlen = 0; wlen < len; wlen += n) + { + if (wlen == 0 && ip->bw_restlen != 0) + { + int l; + + /* Use remainder of previous call. Append the start of + * buf[] to get a full sequence. Might still be too + * short! */ + l = CONV_RESTLEN - ip->bw_restlen; + if (l > len) + l = len; + mch_memmove(ip->bw_rest + ip->bw_restlen, buf, (size_t)l); + n = utf_ptr2len_len(ip->bw_rest, ip->bw_restlen + l); + if (n > ip->bw_restlen + len) + { + /* We have an incomplete byte sequence at the end to + * be written. We can't convert it without the + * remaining bytes. Keep them for the next call. */ + if (ip->bw_restlen + len > CONV_RESTLEN) + return FAIL; + ip->bw_restlen += len; + break; + } + if (n > 1) + c = utf_ptr2char(ip->bw_rest); + else + c = ip->bw_rest[0]; + if (n >= ip->bw_restlen) + { + n -= ip->bw_restlen; + ip->bw_restlen = 0; + } + else + { + ip->bw_restlen -= n; + mch_memmove(ip->bw_rest, ip->bw_rest + n, + (size_t)ip->bw_restlen); + n = 0; + } + } + else + { + n = utf_ptr2len_len(buf + wlen, len - wlen); + if (n > len - wlen) + { + /* We have an incomplete byte sequence at the end to + * be written. We can't convert it without the + * remaining bytes. Keep them for the next call. */ + if (len - wlen > CONV_RESTLEN) + return FAIL; + ip->bw_restlen = len - wlen; + mch_memmove(ip->bw_rest, buf + wlen, + (size_t)ip->bw_restlen); + break; + } + if (n > 1) + c = utf_ptr2char(buf + wlen); + else + c = buf[wlen]; + } + + if (ucs2bytes(c, &p, flags) && !ip->bw_conv_error) + { + ip->bw_conv_error = TRUE; + ip->bw_conv_error_lnum = ip->bw_start_lnum; + } + if (c == NL) + ++ip->bw_start_lnum; + } + if (flags & FIO_LATIN1) + len = (int)(p - buf); + else + { + buf = ip->bw_conv_buf; + len = (int)(p - ip->bw_conv_buf); + } + } + +#ifdef WIN3264 + else if (flags & FIO_CODEPAGE) + { + /* + * Convert UTF-8 or codepage to UCS-2 and then to MS-Windows + * codepage. + */ + char_u *from; + size_t fromlen; + char_u *to; + int u8c; + BOOL bad = FALSE; + int needed; + + if (ip->bw_restlen > 0) + { + /* Need to concatenate the remainder of the previous call and + * the bytes of the current call. Use the end of the + * conversion buffer for this. */ + fromlen = len + ip->bw_restlen; + from = ip->bw_conv_buf + ip->bw_conv_buflen - fromlen; + mch_memmove(from, ip->bw_rest, (size_t)ip->bw_restlen); + mch_memmove(from + ip->bw_restlen, buf, (size_t)len); + } + else + { + from = buf; + fromlen = len; + } + + to = ip->bw_conv_buf; + if (enc_utf8) + { + /* Convert from UTF-8 to UCS-2, to the start of the buffer. + * The buffer has been allocated to be big enough. */ + while (fromlen > 0) + { + n = (int)utf_ptr2len_len(from, (int)fromlen); + if (n > (int)fromlen) /* incomplete byte sequence */ + break; + u8c = utf_ptr2char(from); + *to++ = (u8c & 0xff); + *to++ = (u8c >> 8); + fromlen -= n; + from += n; + } + + /* Copy remainder to ip->bw_rest[] to be used for the next + * call. */ + if (fromlen > CONV_RESTLEN) + { + /* weird overlong sequence */ + ip->bw_conv_error = TRUE; + return FAIL; + } + mch_memmove(ip->bw_rest, from, fromlen); + ip->bw_restlen = (int)fromlen; + } + else + { + /* Convert from enc_codepage to UCS-2, to the start of the + * buffer. The buffer has been allocated to be big enough. */ + ip->bw_restlen = 0; + needed = MultiByteToWideChar(enc_codepage, + MB_ERR_INVALID_CHARS, (LPCSTR)from, (int)fromlen, + NULL, 0); + if (needed == 0) + { + /* When conversion fails there may be a trailing byte. */ + needed = MultiByteToWideChar(enc_codepage, + MB_ERR_INVALID_CHARS, (LPCSTR)from, (int)fromlen - 1, + NULL, 0); + if (needed == 0) + { + /* Conversion doesn't work. */ + ip->bw_conv_error = TRUE; + return FAIL; + } + /* Save the trailing byte for the next call. */ + ip->bw_rest[0] = from[fromlen - 1]; + ip->bw_restlen = 1; + } + needed = MultiByteToWideChar(enc_codepage, MB_ERR_INVALID_CHARS, + (LPCSTR)from, (int)(fromlen - ip->bw_restlen), + (LPWSTR)to, needed); + if (needed == 0) + { + /* Safety check: Conversion doesn't work. */ + ip->bw_conv_error = TRUE; + return FAIL; + } + to += needed * 2; + } + + fromlen = to - ip->bw_conv_buf; + buf = to; +# ifdef CP_UTF8 /* VC 4.1 doesn't define CP_UTF8 */ + if (FIO_GET_CP(flags) == CP_UTF8) + { + /* Convert from UCS-2 to UTF-8, using the remainder of the + * conversion buffer. Fails when out of space. */ + for (from = ip->bw_conv_buf; fromlen > 1; fromlen -= 2) + { + u8c = *from++; + u8c += (*from++ << 8); + to += utf_char2bytes(u8c, to); + if (to + 6 >= ip->bw_conv_buf + ip->bw_conv_buflen) + { + ip->bw_conv_error = TRUE; + return FAIL; + } + } + len = (int)(to - buf); + } + else +# endif + { + /* Convert from UCS-2 to the codepage, using the remainder of + * the conversion buffer. If the conversion uses the default + * character "0", the data doesn't fit in this encoding, so + * fail. */ + len = WideCharToMultiByte(FIO_GET_CP(flags), 0, + (LPCWSTR)ip->bw_conv_buf, (int)fromlen / sizeof(WCHAR), + (LPSTR)to, (int)(ip->bw_conv_buflen - fromlen), 0, + &bad); + if (bad) + { + ip->bw_conv_error = TRUE; + return FAIL; + } + } + } +#endif + +#ifdef MACOS_CONVERT + else if (flags & FIO_MACROMAN) + { + /* + * Convert UTF-8 or latin1 to Apple MacRoman. + */ + char_u *from; + size_t fromlen; + + if (ip->bw_restlen > 0) + { + /* Need to concatenate the remainder of the previous call and + * the bytes of the current call. Use the end of the + * conversion buffer for this. */ + fromlen = len + ip->bw_restlen; + from = ip->bw_conv_buf + ip->bw_conv_buflen - fromlen; + mch_memmove(from, ip->bw_rest, (size_t)ip->bw_restlen); + mch_memmove(from + ip->bw_restlen, buf, (size_t)len); + } + else + { + from = buf; + fromlen = len; + } + + if (enc2macroman(from, fromlen, + ip->bw_conv_buf, &len, ip->bw_conv_buflen, + ip->bw_rest, &ip->bw_restlen) == FAIL) + { + ip->bw_conv_error = TRUE; + return FAIL; + } + buf = ip->bw_conv_buf; + } +#endif + +#ifdef USE_ICONV + if (ip->bw_iconv_fd != (iconv_t)-1) + { + const char *from; + size_t fromlen; + char *to; + size_t tolen; + + /* Convert with iconv(). */ + if (ip->bw_restlen > 0) + { + char *fp; + + /* Need to concatenate the remainder of the previous call and + * the bytes of the current call. Use the end of the + * conversion buffer for this. */ + fromlen = len + ip->bw_restlen; + fp = (char *)ip->bw_conv_buf + ip->bw_conv_buflen - fromlen; + mch_memmove(fp, ip->bw_rest, (size_t)ip->bw_restlen); + mch_memmove(fp + ip->bw_restlen, buf, (size_t)len); + from = fp; + tolen = ip->bw_conv_buflen - fromlen; + } + else + { + from = (const char *)buf; + fromlen = len; + tolen = ip->bw_conv_buflen; + } + to = (char *)ip->bw_conv_buf; + + if (ip->bw_first) + { + size_t save_len = tolen; + + /* output the initial shift state sequence */ + (void)iconv(ip->bw_iconv_fd, NULL, NULL, &to, &tolen); + + /* There is a bug in iconv() on Linux (which appears to be + * wide-spread) which sets "to" to NULL and messes up "tolen". + */ + if (to == NULL) + { + to = (char *)ip->bw_conv_buf; + tolen = save_len; + } + ip->bw_first = FALSE; + } + + /* + * If iconv() has an error or there is not enough room, fail. + */ + if ((iconv(ip->bw_iconv_fd, (void *)&from, &fromlen, &to, &tolen) + == (size_t)-1 && ICONV_ERRNO != ICONV_EINVAL) + || fromlen > CONV_RESTLEN) + { + ip->bw_conv_error = TRUE; + return FAIL; + } + + /* copy remainder to ip->bw_rest[] to be used for the next call. */ + if (fromlen > 0) + mch_memmove(ip->bw_rest, (void *)from, fromlen); + ip->bw_restlen = (int)fromlen; + + buf = ip->bw_conv_buf; + len = (int)((char_u *)to - ip->bw_conv_buf); + } +#endif + } + + if (ip->bw_fd < 0) + /* Only checking conversion, which is OK if we get here. */ + return OK; + +#ifdef FEAT_CRYPT + if (flags & FIO_ENCRYPTED) + { + /* Encrypt the data. Do it in-place if possible, otherwise use an + * allocated buffer. */ +# ifdef CRYPT_NOT_INPLACE + if (crypt_works_inplace(ip->bw_buffer->b_cryptstate)) + { +# endif + crypt_encode_inplace(ip->bw_buffer->b_cryptstate, buf, len); +# ifdef CRYPT_NOT_INPLACE + } + else + { + char_u *outbuf; + + len = crypt_encode_alloc(curbuf->b_cryptstate, buf, len, &outbuf); + if (len == 0) + return OK; /* Crypt layer is buffering, will flush later. */ + wlen = write_eintr(ip->bw_fd, outbuf, len); + vim_free(outbuf); + return (wlen < len) ? FAIL : OK; + } +# endif + } +#endif + + wlen = write_eintr(ip->bw_fd, buf, len); + return (wlen < len) ? FAIL : OK; +} + +/* + * Convert a Unicode character to bytes. + * Return TRUE for an error, FALSE when it's OK. + */ + static int +ucs2bytes( + unsigned c, /* in: character */ + char_u **pp, /* in/out: pointer to result */ + int flags) /* FIO_ flags */ +{ + char_u *p = *pp; + int error = FALSE; + int cc; + + + if (flags & FIO_UCS4) + { + if (flags & FIO_ENDIAN_L) + { + *p++ = c; + *p++ = (c >> 8); + *p++ = (c >> 16); + *p++ = (c >> 24); + } + else + { + *p++ = (c >> 24); + *p++ = (c >> 16); + *p++ = (c >> 8); + *p++ = c; + } + } + else if (flags & (FIO_UCS2 | FIO_UTF16)) + { + if (c >= 0x10000) + { + if (flags & FIO_UTF16) + { + /* Make two words, ten bits of the character in each. First + * word is 0xd800 - 0xdbff, second one 0xdc00 - 0xdfff */ + c -= 0x10000; + if (c >= 0x100000) + error = TRUE; + cc = ((c >> 10) & 0x3ff) + 0xd800; + if (flags & FIO_ENDIAN_L) + { + *p++ = cc; + *p++ = ((unsigned)cc >> 8); + } + else + { + *p++ = ((unsigned)cc >> 8); + *p++ = cc; + } + c = (c & 0x3ff) + 0xdc00; + } + else + error = TRUE; + } + if (flags & FIO_ENDIAN_L) + { + *p++ = c; + *p++ = (c >> 8); + } + else + { + *p++ = (c >> 8); + *p++ = c; + } + } + else /* Latin1 */ + { + if (c >= 0x100) + { + error = TRUE; + *p++ = 0xBF; + } + else + *p++ = c; + } + + *pp = p; + return error; +} + +/* + * Return TRUE if file encoding "fenc" requires conversion from or to + * 'encoding'. + */ + static int +need_conversion(char_u *fenc) +{ + int same_encoding; + int enc_flags; + int fenc_flags; + + if (*fenc == NUL || STRCMP(p_enc, fenc) == 0) + { + same_encoding = TRUE; + fenc_flags = 0; + } + else + { + /* Ignore difference between "ansi" and "latin1", "ucs-4" and + * "ucs-4be", etc. */ + enc_flags = get_fio_flags(p_enc); + fenc_flags = get_fio_flags(fenc); + same_encoding = (enc_flags != 0 && fenc_flags == enc_flags); + } + if (same_encoding) + { + /* Specified encoding matches with 'encoding'. This requires + * conversion when 'encoding' is Unicode but not UTF-8. */ + return enc_unicode != 0; + } + + /* Encodings differ. However, conversion is not needed when 'enc' is any + * Unicode encoding and the file is UTF-8. */ + return !(enc_utf8 && fenc_flags == FIO_UTF8); +} + +/* + * Check "ptr" for a unicode encoding and return the FIO_ flags needed for the + * internal conversion. + * if "ptr" is an empty string, use 'encoding'. + */ + static int +get_fio_flags(char_u *ptr) +{ + int prop; + + if (*ptr == NUL) + ptr = p_enc; + + prop = enc_canon_props(ptr); + if (prop & ENC_UNICODE) + { + if (prop & ENC_2BYTE) + { + if (prop & ENC_ENDIAN_L) + return FIO_UCS2 | FIO_ENDIAN_L; + return FIO_UCS2; + } + if (prop & ENC_4BYTE) + { + if (prop & ENC_ENDIAN_L) + return FIO_UCS4 | FIO_ENDIAN_L; + return FIO_UCS4; + } + if (prop & ENC_2WORD) + { + if (prop & ENC_ENDIAN_L) + return FIO_UTF16 | FIO_ENDIAN_L; + return FIO_UTF16; + } + return FIO_UTF8; + } + if (prop & ENC_LATIN1) + return FIO_LATIN1; + /* must be ENC_DBCS, requires iconv() */ + return 0; +} + +#ifdef WIN3264 +/* + * Check "ptr" for a MS-Windows codepage name and return the FIO_ flags needed + * for the conversion MS-Windows can do for us. Also accept "utf-8". + * Used for conversion between 'encoding' and 'fileencoding'. + */ + static int +get_win_fio_flags(char_u *ptr) +{ + int cp; + + /* Cannot do this when 'encoding' is not utf-8 and not a codepage. */ + if (!enc_utf8 && enc_codepage <= 0) + return 0; + + cp = encname2codepage(ptr); + if (cp == 0) + { +# ifdef CP_UTF8 /* VC 4.1 doesn't define CP_UTF8 */ + if (STRCMP(ptr, "utf-8") == 0) + cp = CP_UTF8; + else +# endif + return 0; + } + return FIO_PUT_CP(cp) | FIO_CODEPAGE; +} +#endif + +#ifdef MACOS_CONVERT +/* + * Check "ptr" for a Carbon supported encoding and return the FIO_ flags + * needed for the internal conversion to/from utf-8 or latin1. + */ + static int +get_mac_fio_flags(char_u *ptr) +{ + if ((enc_utf8 || STRCMP(p_enc, "latin1") == 0) + && (enc_canon_props(ptr) & ENC_MACROMAN)) + return FIO_MACROMAN; + return 0; +} +#endif + +/* + * Check for a Unicode BOM (Byte Order Mark) at the start of p[size]. + * "size" must be at least 2. + * Return the name of the encoding and set "*lenp" to the length. + * Returns NULL when no BOM found. + */ + static char_u * +check_for_bom( + char_u *p, + long size, + int *lenp, + int flags) +{ + char *name = NULL; + int len = 2; + + if (p[0] == 0xef && p[1] == 0xbb && size >= 3 && p[2] == 0xbf + && (flags == FIO_ALL || flags == FIO_UTF8 || flags == 0)) + { + name = "utf-8"; /* EF BB BF */ + len = 3; + } + else if (p[0] == 0xff && p[1] == 0xfe) + { + if (size >= 4 && p[2] == 0 && p[3] == 0 + && (flags == FIO_ALL || flags == (FIO_UCS4 | FIO_ENDIAN_L))) + { + name = "ucs-4le"; /* FF FE 00 00 */ + len = 4; + } + else if (flags == (FIO_UCS2 | FIO_ENDIAN_L)) + name = "ucs-2le"; /* FF FE */ + else if (flags == FIO_ALL || flags == (FIO_UTF16 | FIO_ENDIAN_L)) + /* utf-16le is preferred, it also works for ucs-2le text */ + name = "utf-16le"; /* FF FE */ + } + else if (p[0] == 0xfe && p[1] == 0xff + && (flags == FIO_ALL || flags == FIO_UCS2 || flags == FIO_UTF16)) + { + /* Default to utf-16, it works also for ucs-2 text. */ + if (flags == FIO_UCS2) + name = "ucs-2"; /* FE FF */ + else + name = "utf-16"; /* FE FF */ + } + else if (size >= 4 && p[0] == 0 && p[1] == 0 && p[2] == 0xfe + && p[3] == 0xff && (flags == FIO_ALL || flags == FIO_UCS4)) + { + name = "ucs-4"; /* 00 00 FE FF */ + len = 4; + } + + *lenp = len; + return (char_u *)name; +} + +/* + * Generate a BOM in "buf[4]" for encoding "name". + * Return the length of the BOM (zero when no BOM). + */ + static int +make_bom(char_u *buf, char_u *name) +{ + int flags; + char_u *p; + + flags = get_fio_flags(name); + + /* Can't put a BOM in a non-Unicode file. */ + if (flags == FIO_LATIN1 || flags == 0) + return 0; + + if (flags == FIO_UTF8) /* UTF-8 */ + { + buf[0] = 0xef; + buf[1] = 0xbb; + buf[2] = 0xbf; + return 3; + } + p = buf; + (void)ucs2bytes(0xfeff, &p, flags); + return (int)(p - buf); +} + +/* + * Try to find a shortname by comparing the fullname with the current + * directory. + * Returns "full_path" or pointer into "full_path" if shortened. + */ + char_u * +shorten_fname1(char_u *full_path) +{ + char_u *dirname; + char_u *p = full_path; + + dirname = alloc(MAXPATHL); + if (dirname == NULL) + return full_path; + if (mch_dirname(dirname, MAXPATHL) == OK) + { + p = shorten_fname(full_path, dirname); + if (p == NULL || *p == NUL) + p = full_path; + } + vim_free(dirname); + return p; +} + +/* + * Try to find a shortname by comparing the fullname with the current + * directory. + * Returns NULL if not shorter name possible, pointer into "full_path" + * otherwise. + */ + char_u * +shorten_fname(char_u *full_path, char_u *dir_name) +{ + int len; + char_u *p; + + if (full_path == NULL) + return NULL; + len = (int)STRLEN(dir_name); + if (fnamencmp(dir_name, full_path, len) == 0) + { + p = full_path + len; +#if defined(MSWIN) + /* + * MSWIN: when a file is in the root directory, dir_name will end in a + * slash, since C: by itself does not define a specific dir. In this + * case p may already be correct. <negri> + */ + if (!((len > 2) && (*(p - 2) == ':'))) +#endif + { + if (vim_ispathsep(*p)) + ++p; +#ifndef VMS /* the path separator is always part of the path */ + else + p = NULL; +#endif + } + } +#if defined(MSWIN) + /* + * When using a file in the current drive, remove the drive name: + * "A:\dir\file" -> "\dir\file". This helps when moving a session file on + * a floppy from "A:\dir" to "B:\dir". + */ + else if (len > 3 + && TOUPPER_LOC(full_path[0]) == TOUPPER_LOC(dir_name[0]) + && full_path[1] == ':' + && vim_ispathsep(full_path[2])) + p = full_path + 2; +#endif + else + p = NULL; + return p; +} + +/* + * Shorten filename of a buffer. + * When "force" is TRUE: Use full path from now on for files currently being + * edited, both for file name and swap file name. Try to shorten the file + * names a bit, if safe to do so. + * When "force" is FALSE: Only try to shorten absolute file names. + * For buffers that have buftype "nofile" or "scratch": never change the file + * name. + */ + void +shorten_buf_fname(buf_T *buf, char_u *dirname, int force) +{ + char_u *p; + + if (buf->b_fname != NULL +#ifdef FEAT_QUICKFIX + && !bt_nofile(buf) +#endif + && !path_with_url(buf->b_fname) + && (force + || buf->b_sfname == NULL + || mch_isFullName(buf->b_sfname))) + { + if (buf->b_sfname != buf->b_ffname) + VIM_CLEAR(buf->b_sfname); + p = shorten_fname(buf->b_ffname, dirname); + if (p != NULL) + { + buf->b_sfname = vim_strsave(p); + buf->b_fname = buf->b_sfname; + } + if (p == NULL || buf->b_fname == NULL) + buf->b_fname = buf->b_ffname; + } +} + +/* + * Shorten filenames for all buffers. + */ + void +shorten_fnames(int force) +{ + char_u dirname[MAXPATHL]; + buf_T *buf; + + mch_dirname(dirname, MAXPATHL); + FOR_ALL_BUFFERS(buf) + { + shorten_buf_fname(buf, dirname, force); + + /* Always make the swap file name a full path, a "nofile" buffer may + * also have a swap file. */ + mf_fullname(buf->b_ml.ml_mfp); + } + status_redraw_all(); + redraw_tabline = TRUE; +} + +#if (defined(FEAT_DND) && defined(FEAT_GUI_GTK)) \ + || defined(FEAT_GUI_MSWIN) \ + || defined(FEAT_GUI_MAC) \ + || defined(PROTO) +/* + * Shorten all filenames in "fnames[count]" by current directory. + */ + void +shorten_filenames(char_u **fnames, int count) +{ + int i; + char_u dirname[MAXPATHL]; + char_u *p; + + if (fnames == NULL || count < 1) + return; + mch_dirname(dirname, sizeof(dirname)); + for (i = 0; i < count; ++i) + { + if ((p = shorten_fname(fnames[i], dirname)) != NULL) + { + /* shorten_fname() returns pointer in given "fnames[i]". If free + * "fnames[i]" first, "p" becomes invalid. So we need to copy + * "p" first then free fnames[i]. */ + p = vim_strsave(p); + vim_free(fnames[i]); + fnames[i] = p; + } + } +} +#endif + +/* + * Add extension to file name - change path/fo.o.h to path/fo.o.h.ext or + * fo_o_h.ext for MSDOS or when shortname option set. + * + * Assumed that fname is a valid name found in the filesystem we assure that + * the return value is a different name and ends in 'ext'. + * "ext" MUST be at most 4 characters long if it starts with a dot, 3 + * characters otherwise. + * Space for the returned name is allocated, must be freed later. + * Returns NULL when out of memory. + */ + char_u * +modname( + char_u *fname, + char_u *ext, + int prepend_dot) /* may prepend a '.' to file name */ +{ + return buf_modname((curbuf->b_p_sn || curbuf->b_shortname), + fname, ext, prepend_dot); +} + + char_u * +buf_modname( + int shortname, /* use 8.3 file name */ + char_u *fname, + char_u *ext, + int prepend_dot) /* may prepend a '.' to file name */ +{ + char_u *retval; + char_u *s; + char_u *e; + char_u *ptr; + int fnamelen, extlen; + + extlen = (int)STRLEN(ext); + + /* + * If there is no file name we must get the name of the current directory + * (we need the full path in case :cd is used). + */ + if (fname == NULL || *fname == NUL) + { + retval = alloc((unsigned)(MAXPATHL + extlen + 3)); + if (retval == NULL) + return NULL; + if (mch_dirname(retval, MAXPATHL) == FAIL || + (fnamelen = (int)STRLEN(retval)) == 0) + { + vim_free(retval); + return NULL; + } + if (!after_pathsep(retval, retval + fnamelen)) + { + retval[fnamelen++] = PATHSEP; + retval[fnamelen] = NUL; + } + prepend_dot = FALSE; /* nothing to prepend a dot to */ + } + else + { + fnamelen = (int)STRLEN(fname); + retval = alloc((unsigned)(fnamelen + extlen + 3)); + if (retval == NULL) + return NULL; + STRCPY(retval, fname); +#ifdef VMS + vms_remove_version(retval); /* we do not need versions here */ +#endif + } + + /* + * search backwards until we hit a '/', '\' or ':' replacing all '.' + * by '_' for MSDOS or when shortname option set and ext starts with a dot. + * Then truncate what is after the '/', '\' or ':' to 8 characters for + * MSDOS and 26 characters for AMIGA, a lot more for UNIX. + */ + for (ptr = retval + fnamelen; ptr > retval; MB_PTR_BACK(retval, ptr)) + { + if (*ext == '.' +#ifdef USE_LONG_FNAME + && (!USE_LONG_FNAME || shortname) +#else + && shortname +#endif + ) + if (*ptr == '.') /* replace '.' by '_' */ + *ptr = '_'; + if (vim_ispathsep(*ptr)) + { + ++ptr; + break; + } + } + + /* the file name has at most BASENAMELEN characters. */ + if (STRLEN(ptr) > (unsigned)BASENAMELEN) + ptr[BASENAMELEN] = '\0'; + + s = ptr + STRLEN(ptr); + + /* + * For 8.3 file names we may have to reduce the length. + */ +#ifdef USE_LONG_FNAME + if (!USE_LONG_FNAME || shortname) +#else + if (shortname) +#endif + { + /* + * If there is no file name, or the file name ends in '/', and the + * extension starts with '.', put a '_' before the dot, because just + * ".ext" is invalid. + */ + if (fname == NULL || *fname == NUL + || vim_ispathsep(fname[STRLEN(fname) - 1])) + { + if (*ext == '.') + *s++ = '_'; + } + /* + * If the extension starts with '.', truncate the base name at 8 + * characters + */ + else if (*ext == '.') + { + if ((size_t)(s - ptr) > (size_t)8) + { + s = ptr + 8; + *s = '\0'; + } + } + /* + * If the extension doesn't start with '.', and the file name + * doesn't have an extension yet, append a '.' + */ + else if ((e = vim_strchr(ptr, '.')) == NULL) + *s++ = '.'; + /* + * If the extension doesn't start with '.', and there already is an + * extension, it may need to be truncated + */ + else if ((int)STRLEN(e) + extlen > 4) + s = e + 4 - extlen; + } +#if defined(USE_LONG_FNAME) || defined(WIN3264) + /* + * If there is no file name, and the extension starts with '.', put a + * '_' before the dot, because just ".ext" may be invalid if it's on a + * FAT partition, and on HPFS it doesn't matter. + */ + else if ((fname == NULL || *fname == NUL) && *ext == '.') + *s++ = '_'; +#endif + + /* + * Append the extension. + * ext can start with '.' and cannot exceed 3 more characters. + */ + STRCPY(s, ext); + + /* + * Prepend the dot. + */ + if (prepend_dot && !shortname && *(e = gettail(retval)) != '.' +#ifdef USE_LONG_FNAME + && USE_LONG_FNAME +#endif + ) + { + STRMOVE(e + 1, e); + *e = '.'; + } + + /* + * Check that, after appending the extension, the file name is really + * different. + */ + if (fname != NULL && STRCMP(fname, retval) == 0) + { + /* we search for a character that can be replaced by '_' */ + while (--s >= ptr) + { + if (*s != '_') + { + *s = '_'; + break; + } + } + if (s < ptr) /* fname was "________.<ext>", how tricky! */ + *ptr = 'v'; + } + return retval; +} + +/* + * Like fgets(), but if the file line is too long, it is truncated and the + * rest of the line is thrown away. Returns TRUE for end-of-file. + * If the line is truncated then buf[size - 2] will not be NUL. + */ + int +vim_fgets(char_u *buf, int size, FILE *fp) +{ + char *eof; +#define FGETS_SIZE 200 + char tbuf[FGETS_SIZE]; + + buf[size - 2] = NUL; +#ifdef USE_CR + eof = fgets_cr((char *)buf, size, fp); +#else + eof = fgets((char *)buf, size, fp); +#endif + if (buf[size - 2] != NUL && buf[size - 2] != '\n') + { + buf[size - 1] = NUL; /* Truncate the line */ + + /* Now throw away the rest of the line: */ + do + { + tbuf[FGETS_SIZE - 2] = NUL; +#ifdef USE_CR + vim_ignoredp = fgets_cr((char *)tbuf, FGETS_SIZE, fp); +#else + vim_ignoredp = fgets((char *)tbuf, FGETS_SIZE, fp); +#endif + } while (tbuf[FGETS_SIZE - 2] != NUL && tbuf[FGETS_SIZE - 2] != '\n'); + } + return (eof == NULL); +} + +#if defined(USE_CR) || defined(PROTO) +/* + * Like vim_fgets(), but accept any line terminator: CR, CR-LF or LF. + * Returns TRUE for end-of-file. + * Only used for the Mac, because it's much slower than vim_fgets(). + */ + int +tag_fgets(char_u *buf, int size, FILE *fp) +{ + int i = 0; + int c; + int eof = FALSE; + + for (;;) + { + c = fgetc(fp); + if (c == EOF) + { + eof = TRUE; + break; + } + if (c == '\r') + { + /* Always store a NL for end-of-line. */ + if (i < size - 1) + buf[i++] = '\n'; + c = fgetc(fp); + if (c != '\n') /* Macintosh format: single CR. */ + ungetc(c, fp); + break; + } + if (i < size - 1) + buf[i++] = c; + if (c == '\n') + break; + } + buf[i] = NUL; + return eof; +} +#endif + +/* + * rename() only works if both files are on the same file system, this + * function will (attempts to?) copy the file across if rename fails -- webb + * Return -1 for failure, 0 for success. + */ + int +vim_rename(char_u *from, char_u *to) +{ + int fd_in; + int fd_out; + int n; + char *errmsg = NULL; + char *buffer; +#ifdef AMIGA + BPTR flock; +#endif + stat_T st; + long perm; +#ifdef HAVE_ACL + vim_acl_T acl; /* ACL from original file */ +#endif + int use_tmp_file = FALSE; + + /* + * When the names are identical, there is nothing to do. When they refer + * to the same file (ignoring case and slash/backslash differences) but + * the file name differs we need to go through a temp file. + */ + if (fnamecmp(from, to) == 0) + { + if (p_fic && STRCMP(gettail(from), gettail(to)) != 0) + use_tmp_file = TRUE; + else + return 0; + } + + /* + * Fail if the "from" file doesn't exist. Avoids that "to" is deleted. + */ + if (mch_stat((char *)from, &st) < 0) + return -1; + +#ifdef UNIX + { + stat_T st_to; + + /* It's possible for the source and destination to be the same file. + * This happens when "from" and "to" differ in case and are on a FAT32 + * filesystem. In that case go through a temp file name. */ + if (mch_stat((char *)to, &st_to) >= 0 + && st.st_dev == st_to.st_dev + && st.st_ino == st_to.st_ino) + use_tmp_file = TRUE; + } +#endif +#ifdef WIN3264 + { + BY_HANDLE_FILE_INFORMATION info1, info2; + + /* It's possible for the source and destination to be the same file. + * In that case go through a temp file name. This makes rename("foo", + * "./foo") a no-op (in a complicated way). */ + if (win32_fileinfo(from, &info1) == FILEINFO_OK + && win32_fileinfo(to, &info2) == FILEINFO_OK + && info1.dwVolumeSerialNumber == info2.dwVolumeSerialNumber + && info1.nFileIndexHigh == info2.nFileIndexHigh + && info1.nFileIndexLow == info2.nFileIndexLow) + use_tmp_file = TRUE; + } +#endif + + if (use_tmp_file) + { + char tempname[MAXPATHL + 1]; + + /* + * Find a name that doesn't exist and is in the same directory. + * Rename "from" to "tempname" and then rename "tempname" to "to". + */ + if (STRLEN(from) >= MAXPATHL - 5) + return -1; + STRCPY(tempname, from); + for (n = 123; n < 99999; ++n) + { + sprintf((char *)gettail((char_u *)tempname), "%d", n); + if (mch_stat(tempname, &st) < 0) + { + if (mch_rename((char *)from, tempname) == 0) + { + if (mch_rename(tempname, (char *)to) == 0) + return 0; + /* Strange, the second step failed. Try moving the + * file back and return failure. */ + mch_rename(tempname, (char *)from); + return -1; + } + /* If it fails for one temp name it will most likely fail + * for any temp name, give up. */ + return -1; + } + } + return -1; + } + + /* + * Delete the "to" file, this is required on some systems to make the + * mch_rename() work, on other systems it makes sure that we don't have + * two files when the mch_rename() fails. + */ + +#ifdef AMIGA + /* + * With MSDOS-compatible filesystems (crossdos, messydos) it is possible + * that the name of the "to" file is the same as the "from" file, even + * though the names are different. To avoid the chance of accidentally + * deleting the "from" file (horror!) we lock it during the remove. + * + * When used for making a backup before writing the file: This should not + * happen with ":w", because startscript() should detect this problem and + * set buf->b_shortname, causing modname() to return a correct ".bak" file + * name. This problem does exist with ":w filename", but then the + * original file will be somewhere else so the backup isn't really + * important. If autoscripting is off the rename may fail. + */ + flock = Lock((UBYTE *)from, (long)ACCESS_READ); +#endif + mch_remove(to); +#ifdef AMIGA + if (flock) + UnLock(flock); +#endif + + /* + * First try a normal rename, return if it works. + */ + if (mch_rename((char *)from, (char *)to) == 0) + return 0; + + /* + * Rename() failed, try copying the file. + */ + perm = mch_getperm(from); +#ifdef HAVE_ACL + /* For systems that support ACL: get the ACL from the original file. */ + acl = mch_get_acl(from); +#endif + fd_in = mch_open((char *)from, O_RDONLY|O_EXTRA, 0); + if (fd_in == -1) + { +#ifdef HAVE_ACL + mch_free_acl(acl); +#endif + return -1; + } + + /* Create the new file with same permissions as the original. */ + fd_out = mch_open((char *)to, + O_CREAT|O_EXCL|O_WRONLY|O_EXTRA|O_NOFOLLOW, (int)perm); + if (fd_out == -1) + { + close(fd_in); +#ifdef HAVE_ACL + mch_free_acl(acl); +#endif + return -1; + } + + buffer = (char *)alloc(BUFSIZE); + if (buffer == NULL) + { + close(fd_out); + close(fd_in); +#ifdef HAVE_ACL + mch_free_acl(acl); +#endif + return -1; + } + + while ((n = read_eintr(fd_in, buffer, BUFSIZE)) > 0) + if (write_eintr(fd_out, buffer, n) != n) + { + errmsg = _("E208: Error writing to \"%s\""); + break; + } + + vim_free(buffer); + close(fd_in); + if (close(fd_out) < 0) + errmsg = _("E209: Error closing \"%s\""); + if (n < 0) + { + errmsg = _("E210: Error reading \"%s\""); + to = from; + } +#ifndef UNIX /* for Unix mch_open() already set the permission */ + mch_setperm(to, perm); +#endif +#ifdef HAVE_ACL + mch_set_acl(to, acl); + mch_free_acl(acl); +#endif +#if defined(HAVE_SELINUX) || defined(HAVE_SMACK) + mch_copy_sec(from, to); +#endif + if (errmsg != NULL) + { + semsg(errmsg, to); + return -1; + } + mch_remove(from); + return 0; +} + +static int already_warned = FALSE; + +/* + * Check if any not hidden buffer has been changed. + * Postpone the check if there are characters in the stuff buffer, a global + * command is being executed, a mapping is being executed or an autocommand is + * busy. + * Returns TRUE if some message was written (screen should be redrawn and + * cursor positioned). + */ + int +check_timestamps( + int focus) /* called for GUI focus event */ +{ + buf_T *buf; + int didit = 0; + int n; + + /* Don't check timestamps while system() or another low-level function may + * cause us to lose and gain focus. */ + if (no_check_timestamps > 0) + return FALSE; + + /* Avoid doing a check twice. The OK/Reload dialog can cause a focus + * event and we would keep on checking if the file is steadily growing. + * Do check again after typing something. */ + if (focus && did_check_timestamps) + { + need_check_timestamps = TRUE; + return FALSE; + } + + if (!stuff_empty() || global_busy || !typebuf_typed() + || autocmd_busy || curbuf_lock > 0 || allbuf_lock > 0) + need_check_timestamps = TRUE; /* check later */ + else + { + ++no_wait_return; + did_check_timestamps = TRUE; + already_warned = FALSE; + FOR_ALL_BUFFERS(buf) + { + /* Only check buffers in a window. */ + if (buf->b_nwindows > 0) + { + bufref_T bufref; + + set_bufref(&bufref, buf); + n = buf_check_timestamp(buf, focus); + if (didit < n) + didit = n; + if (n > 0 && !bufref_valid(&bufref)) + { + /* Autocommands have removed the buffer, start at the + * first one again. */ + buf = firstbuf; + continue; + } + } + } + --no_wait_return; + need_check_timestamps = FALSE; + if (need_wait_return && didit == 2) + { + /* make sure msg isn't overwritten */ + msg_puts("\n"); + out_flush(); + } + } + return didit; +} + +/* + * Move all the lines from buffer "frombuf" to buffer "tobuf". + * Return OK or FAIL. When FAIL "tobuf" is incomplete and/or "frombuf" is not + * empty. + */ + static int +move_lines(buf_T *frombuf, buf_T *tobuf) +{ + buf_T *tbuf = curbuf; + int retval = OK; + linenr_T lnum; + char_u *p; + + /* Copy the lines in "frombuf" to "tobuf". */ + curbuf = tobuf; + for (lnum = 1; lnum <= frombuf->b_ml.ml_line_count; ++lnum) + { + p = vim_strsave(ml_get_buf(frombuf, lnum, FALSE)); + if (p == NULL || ml_append(lnum - 1, p, 0, FALSE) == FAIL) + { + vim_free(p); + retval = FAIL; + break; + } + vim_free(p); + } + + /* Delete all the lines in "frombuf". */ + if (retval != FAIL) + { + curbuf = frombuf; + for (lnum = curbuf->b_ml.ml_line_count; lnum > 0; --lnum) + if (ml_delete(lnum, FALSE) == FAIL) + { + /* Oops! We could try putting back the saved lines, but that + * might fail again... */ + retval = FAIL; + break; + } + } + + curbuf = tbuf; + return retval; +} + +/* + * Check if buffer "buf" has been changed. + * Also check if the file for a new buffer unexpectedly appeared. + * return 1 if a changed buffer was found. + * return 2 if a message has been displayed. + * return 0 otherwise. + */ + int +buf_check_timestamp( + buf_T *buf, + int focus UNUSED) /* called for GUI focus event */ +{ + stat_T st; + int stat_res; + int retval = 0; + char_u *path; + char *tbuf; + char *mesg = NULL; + char *mesg2 = ""; + int helpmesg = FALSE; + int reload = FALSE; + char *reason; +#if defined(FEAT_CON_DIALOG) || defined(FEAT_GUI_DIALOG) + int can_reload = FALSE; +#endif + off_T orig_size = buf->b_orig_size; + int orig_mode = buf->b_orig_mode; +#ifdef FEAT_GUI + int save_mouse_correct = need_mouse_correct; +#endif + static int busy = FALSE; + int n; +#ifdef FEAT_EVAL + char_u *s; +#endif + bufref_T bufref; + + set_bufref(&bufref, buf); + + /* If there is no file name, the buffer is not loaded, 'buftype' is + * set, we are in the middle of a save or being called recursively: ignore + * this buffer. */ + if (buf->b_ffname == NULL + || buf->b_ml.ml_mfp == NULL + || !bt_normal(buf) + || buf->b_saving + || busy +#ifdef FEAT_NETBEANS_INTG + || isNetbeansBuffer(buf) +#endif +#ifdef FEAT_TERMINAL + || buf->b_term != NULL +#endif + ) + return 0; + + if ( !(buf->b_flags & BF_NOTEDITED) + && buf->b_mtime != 0 + && ((stat_res = mch_stat((char *)buf->b_ffname, &st)) < 0 + || time_differs((long)st.st_mtime, buf->b_mtime) + || st.st_size != buf->b_orig_size +#ifdef HAVE_ST_MODE + || (int)st.st_mode != buf->b_orig_mode +#else + || mch_getperm(buf->b_ffname) != buf->b_orig_mode +#endif + )) + { + retval = 1; + + // set b_mtime to stop further warnings (e.g., when executing + // FileChangedShell autocmd) + if (stat_res < 0) + { + // When 'autoread' is set we'll check the file again to see if it + // re-appears. + buf->b_mtime = buf->b_p_ar; + buf->b_orig_size = 0; + buf->b_orig_mode = 0; + } + else + buf_store_time(buf, &st, buf->b_ffname); + + /* Don't do anything for a directory. Might contain the file + * explorer. */ + if (mch_isdir(buf->b_fname)) + ; + + /* + * If 'autoread' is set, the buffer has no changes and the file still + * exists, reload the buffer. Use the buffer-local option value if it + * was set, the global option value otherwise. + */ + else if ((buf->b_p_ar >= 0 ? buf->b_p_ar : p_ar) + && !bufIsChanged(buf) && stat_res >= 0) + reload = TRUE; + else + { + if (stat_res < 0) + reason = "deleted"; + else if (bufIsChanged(buf)) + reason = "conflict"; + /* + * Check if the file contents really changed to avoid giving a + * warning when only the timestamp was set (e.g., checked out of + * CVS). Always warn when the buffer was changed. + */ + else if (orig_size != buf->b_orig_size || buf_contents_changed(buf)) + reason = "changed"; + else if (orig_mode != buf->b_orig_mode) + reason = "mode"; + else + reason = "time"; + + /* + * Only give the warning if there are no FileChangedShell + * autocommands. + * Avoid being called recursively by setting "busy". + */ + busy = TRUE; +#ifdef FEAT_EVAL + set_vim_var_string(VV_FCS_REASON, (char_u *)reason, -1); + set_vim_var_string(VV_FCS_CHOICE, (char_u *)"", -1); +#endif + ++allbuf_lock; + n = apply_autocmds(EVENT_FILECHANGEDSHELL, + buf->b_fname, buf->b_fname, FALSE, buf); + --allbuf_lock; + busy = FALSE; + if (n) + { + if (!bufref_valid(&bufref)) + emsg(_("E246: FileChangedShell autocommand deleted buffer")); +#ifdef FEAT_EVAL + s = get_vim_var_str(VV_FCS_CHOICE); + if (STRCMP(s, "reload") == 0 && *reason != 'd') + reload = TRUE; + else if (STRCMP(s, "ask") == 0) + n = FALSE; + else +#endif + return 2; + } + if (!n) + { + if (*reason == 'd') + mesg = _("E211: File \"%s\" no longer available"); + else + { + helpmesg = TRUE; +#if defined(FEAT_CON_DIALOG) || defined(FEAT_GUI_DIALOG) + can_reload = TRUE; +#endif + if (reason[2] == 'n') + { + mesg = _("W12: Warning: File \"%s\" has changed and the buffer was changed in Vim as well"); + mesg2 = _("See \":help W12\" for more info."); + } + else if (reason[1] == 'h') + { + mesg = _("W11: Warning: File \"%s\" has changed since editing started"); + mesg2 = _("See \":help W11\" for more info."); + } + else if (*reason == 'm') + { + mesg = _("W16: Warning: Mode of file \"%s\" has changed since editing started"); + mesg2 = _("See \":help W16\" for more info."); + } + else + /* Only timestamp changed, store it to avoid a warning + * in check_mtime() later. */ + buf->b_mtime_read = buf->b_mtime; + } + } + } + + } + else if ((buf->b_flags & BF_NEW) && !(buf->b_flags & BF_NEW_W) + && vim_fexists(buf->b_ffname)) + { + retval = 1; + mesg = _("W13: Warning: File \"%s\" has been created after editing started"); + buf->b_flags |= BF_NEW_W; +#if defined(FEAT_CON_DIALOG) || defined(FEAT_GUI_DIALOG) + can_reload = TRUE; +#endif + } + + if (mesg != NULL) + { + path = home_replace_save(buf, buf->b_fname); + if (path != NULL) + { + if (!helpmesg) + mesg2 = ""; + tbuf = (char *)alloc((unsigned)(STRLEN(path) + STRLEN(mesg) + + STRLEN(mesg2) + 2)); + sprintf(tbuf, mesg, path); +#ifdef FEAT_EVAL + /* Set warningmsg here, before the unimportant and output-specific + * mesg2 has been appended. */ + set_vim_var_string(VV_WARNINGMSG, (char_u *)tbuf, -1); +#endif +#if defined(FEAT_CON_DIALOG) || defined(FEAT_GUI_DIALOG) + if (can_reload) + { + if (*mesg2 != NUL) + { + STRCAT(tbuf, "\n"); + STRCAT(tbuf, mesg2); + } + if (do_dialog(VIM_WARNING, (char_u *)_("Warning"), + (char_u *)tbuf, + (char_u *)_("&OK\n&Load File"), 1, NULL, TRUE) == 2) + reload = TRUE; + } + else +#endif + if (State > NORMAL_BUSY || (State & CMDLINE) || already_warned) + { + if (*mesg2 != NUL) + { + STRCAT(tbuf, "; "); + STRCAT(tbuf, mesg2); + } + emsg(tbuf); + retval = 2; + } + else + { + if (!autocmd_busy) + { + msg_start(); + msg_puts_attr(tbuf, HL_ATTR(HLF_E) + MSG_HIST); + if (*mesg2 != NUL) + msg_puts_attr(mesg2, HL_ATTR(HLF_W) + MSG_HIST); + msg_clr_eos(); + (void)msg_end(); + if (emsg_silent == 0) + { + out_flush(); +#ifdef FEAT_GUI + if (!focus) +#endif + /* give the user some time to think about it */ + ui_delay(1000L, TRUE); + + /* don't redraw and erase the message */ + redraw_cmdline = FALSE; + } + } + already_warned = TRUE; + } + + vim_free(path); + vim_free(tbuf); + } + } + + if (reload) + { + /* Reload the buffer. */ + buf_reload(buf, orig_mode); +#ifdef FEAT_PERSISTENT_UNDO + if (buf->b_p_udf && buf->b_ffname != NULL) + { + char_u hash[UNDO_HASH_SIZE]; + buf_T *save_curbuf = curbuf; + + /* Any existing undo file is unusable, write it now. */ + curbuf = buf; + u_compute_hash(hash); + u_write_undo(NULL, FALSE, buf, hash); + curbuf = save_curbuf; + } +#endif + } + + /* Trigger FileChangedShell when the file was changed in any way. */ + if (bufref_valid(&bufref) && retval != 0) + (void)apply_autocmds(EVENT_FILECHANGEDSHELLPOST, + buf->b_fname, buf->b_fname, FALSE, buf); +#ifdef FEAT_GUI + /* restore this in case an autocommand has set it; it would break + * 'mousefocus' */ + need_mouse_correct = save_mouse_correct; +#endif + + return retval; +} + +/* + * Reload a buffer that is already loaded. + * Used when the file was changed outside of Vim. + * "orig_mode" is buf->b_orig_mode before the need for reloading was detected. + * buf->b_orig_mode may have been reset already. + */ + void +buf_reload(buf_T *buf, int orig_mode) +{ + exarg_T ea; + pos_T old_cursor; + linenr_T old_topline; + int old_ro = buf->b_p_ro; + buf_T *savebuf; + bufref_T bufref; + int saved = OK; + aco_save_T aco; + int flags = READ_NEW; + + /* set curwin/curbuf for "buf" and save some things */ + aucmd_prepbuf(&aco, buf); + + /* We only want to read the text from the file, not reset the syntax + * highlighting, clear marks, diff status, etc. Force the fileformat + * and encoding to be the same. */ + if (prep_exarg(&ea, buf) == OK) + { + old_cursor = curwin->w_cursor; + old_topline = curwin->w_topline; + + if (p_ur < 0 || curbuf->b_ml.ml_line_count <= p_ur) + { + /* Save all the text, so that the reload can be undone. + * Sync first so that this is a separate undo-able action. */ + u_sync(FALSE); + saved = u_savecommon(0, curbuf->b_ml.ml_line_count + 1, 0, TRUE); + flags |= READ_KEEP_UNDO; + } + + /* + * To behave like when a new file is edited (matters for + * BufReadPost autocommands) we first need to delete the current + * buffer contents. But if reading the file fails we should keep + * the old contents. Can't use memory only, the file might be + * too big. Use a hidden buffer to move the buffer contents to. + */ + if (BUFEMPTY() || saved == FAIL) + savebuf = NULL; + else + { + /* Allocate a buffer without putting it in the buffer list. */ + savebuf = buflist_new(NULL, NULL, (linenr_T)1, BLN_DUMMY); + set_bufref(&bufref, savebuf); + if (savebuf != NULL && buf == curbuf) + { + /* Open the memline. */ + curbuf = savebuf; + curwin->w_buffer = savebuf; + saved = ml_open(curbuf); + curbuf = buf; + curwin->w_buffer = buf; + } + if (savebuf == NULL || saved == FAIL || buf != curbuf + || move_lines(buf, savebuf) == FAIL) + { + semsg(_("E462: Could not prepare for reloading \"%s\""), + buf->b_fname); + saved = FAIL; + } + } + + if (saved == OK) + { + curbuf->b_flags |= BF_CHECK_RO; /* check for RO again */ + keep_filetype = TRUE; /* don't detect 'filetype' */ + if (readfile(buf->b_ffname, buf->b_fname, (linenr_T)0, + (linenr_T)0, + (linenr_T)MAXLNUM, &ea, flags) != OK) + { +#if defined(FEAT_EVAL) + if (!aborting()) +#endif + semsg(_("E321: Could not reload \"%s\""), buf->b_fname); + if (savebuf != NULL && bufref_valid(&bufref) && buf == curbuf) + { + /* Put the text back from the save buffer. First + * delete any lines that readfile() added. */ + while (!BUFEMPTY()) + if (ml_delete(buf->b_ml.ml_line_count, FALSE) == FAIL) + break; + (void)move_lines(savebuf, buf); + } + } + else if (buf == curbuf) /* "buf" still valid */ + { + /* Mark the buffer as unmodified and free undo info. */ + unchanged(buf, TRUE); + if ((flags & READ_KEEP_UNDO) == 0) + { + u_blockfree(buf); + u_clearall(buf); + } + else + { + /* Mark all undo states as changed. */ + u_unchanged(curbuf); + } + } + } + vim_free(ea.cmd); + + if (savebuf != NULL && bufref_valid(&bufref)) + wipe_buffer(savebuf, FALSE); + +#ifdef FEAT_DIFF + /* Invalidate diff info if necessary. */ + diff_invalidate(curbuf); +#endif + + /* Restore the topline and cursor position and check it (lines may + * have been removed). */ + if (old_topline > curbuf->b_ml.ml_line_count) + curwin->w_topline = curbuf->b_ml.ml_line_count; + else + curwin->w_topline = old_topline; + curwin->w_cursor = old_cursor; + check_cursor(); + update_topline(); + keep_filetype = FALSE; +#ifdef FEAT_FOLDING + { + win_T *wp; + tabpage_T *tp; + + /* Update folds unless they are defined manually. */ + FOR_ALL_TAB_WINDOWS(tp, wp) + if (wp->w_buffer == curwin->w_buffer + && !foldmethodIsManual(wp)) + foldUpdateAll(wp); + } +#endif + /* If the mode didn't change and 'readonly' was set, keep the old + * value; the user probably used the ":view" command. But don't + * reset it, might have had a read error. */ + if (orig_mode == curbuf->b_orig_mode) + curbuf->b_p_ro |= old_ro; + + /* Modelines must override settings done by autocommands. */ + do_modelines(0); + } + + /* restore curwin/curbuf and a few other things */ + aucmd_restbuf(&aco); + /* Careful: autocommands may have made "buf" invalid! */ +} + + void +buf_store_time(buf_T *buf, stat_T *st, char_u *fname UNUSED) +{ + buf->b_mtime = (long)st->st_mtime; + buf->b_orig_size = st->st_size; +#ifdef HAVE_ST_MODE + buf->b_orig_mode = (int)st->st_mode; +#else + buf->b_orig_mode = mch_getperm(fname); +#endif +} + +/* + * Adjust the line with missing eol, used for the next write. + * Used for do_filter(), when the input lines for the filter are deleted. + */ + void +write_lnum_adjust(linenr_T offset) +{ + if (curbuf->b_no_eol_lnum != 0) /* only if there is a missing eol */ + curbuf->b_no_eol_lnum += offset; +} + +#if defined(TEMPDIRNAMES) || defined(FEAT_EVAL) || defined(PROTO) +/* + * Delete "name" and everything in it, recursively. + * return 0 for succes, -1 if some file was not deleted. + */ + int +delete_recursive(char_u *name) +{ + int result = 0; + char_u **files; + int file_count; + int i; + char_u *exp; + + /* A symbolic link to a directory itself is deleted, not the directory it + * points to. */ + if ( +# if defined(UNIX) || defined(WIN32) + mch_isrealdir(name) +# else + mch_isdir(name) +# endif + ) + { + vim_snprintf((char *)NameBuff, MAXPATHL, "%s/*", name); + exp = vim_strsave(NameBuff); + if (exp == NULL) + return -1; + if (gen_expand_wildcards(1, &exp, &file_count, &files, + EW_DIR|EW_FILE|EW_SILENT|EW_ALLLINKS|EW_DODOT|EW_EMPTYOK) == OK) + { + for (i = 0; i < file_count; ++i) + if (delete_recursive(files[i]) != 0) + result = -1; + FreeWild(file_count, files); + } + else + result = -1; + vim_free(exp); + (void)mch_rmdir(name); + } + else + result = mch_remove(name) == 0 ? 0 : -1; + + return result; +} +#endif + +#if defined(TEMPDIRNAMES) || defined(PROTO) +static long temp_count = 0; /* Temp filename counter. */ + +/* + * Delete the temp directory and all files it contains. + */ + void +vim_deltempdir(void) +{ + if (vim_tempdir != NULL) + { + /* remove the trailing path separator */ + gettail(vim_tempdir)[-1] = NUL; + delete_recursive(vim_tempdir); + VIM_CLEAR(vim_tempdir); + } +} + +/* + * Directory "tempdir" was created. Expand this name to a full path and put + * it in "vim_tempdir". This avoids that using ":cd" would confuse us. + * "tempdir" must be no longer than MAXPATHL. + */ + static void +vim_settempdir(char_u *tempdir) +{ + char_u *buf; + + buf = alloc((unsigned)MAXPATHL + 2); + if (buf != NULL) + { + if (vim_FullName(tempdir, buf, MAXPATHL, FALSE) == FAIL) + STRCPY(buf, tempdir); + add_pathsep(buf); + vim_tempdir = vim_strsave(buf); + vim_free(buf); + } +} +#endif + +/* + * vim_tempname(): Return a unique name that can be used for a temp file. + * + * The temp file is NOT guaranteed to be created. If "keep" is FALSE it is + * guaranteed to NOT be created. + * + * The returned pointer is to allocated memory. + * The returned pointer is NULL if no valid name was found. + */ + char_u * +vim_tempname( + int extra_char UNUSED, /* char to use in the name instead of '?' */ + int keep UNUSED) +{ +#ifdef USE_TMPNAM + char_u itmp[L_tmpnam]; /* use tmpnam() */ +#else + char_u itmp[TEMPNAMELEN]; +#endif + +#ifdef TEMPDIRNAMES + static char *(tempdirs[]) = {TEMPDIRNAMES}; + int i; +# ifndef EEXIST + stat_T st; +# endif + + /* + * This will create a directory for private use by this instance of Vim. + * This is done once, and the same directory is used for all temp files. + * This method avoids security problems because of symlink attacks et al. + * It's also a bit faster, because we only need to check for an existing + * file when creating the directory and not for each temp file. + */ + if (vim_tempdir == NULL) + { + /* + * Try the entries in TEMPDIRNAMES to create the temp directory. + */ + for (i = 0; i < (int)(sizeof(tempdirs) / sizeof(char *)); ++i) + { +# ifndef HAVE_MKDTEMP + size_t itmplen; + long nr; + long off; +# endif + + /* Expand $TMP, leave room for "/v1100000/999999999". + * Skip the directory check if the expansion fails. */ + expand_env((char_u *)tempdirs[i], itmp, TEMPNAMELEN - 20); + if (itmp[0] != '$' && mch_isdir(itmp)) + { + /* directory exists */ + add_pathsep(itmp); + +# ifdef HAVE_MKDTEMP + { +# if defined(UNIX) || defined(VMS) + /* Make sure the umask doesn't remove the executable bit. + * "repl" has been reported to use "177". */ + mode_t umask_save = umask(077); +# endif + /* Leave room for filename */ + STRCAT(itmp, "vXXXXXX"); + if (mkdtemp((char *)itmp) != NULL) + vim_settempdir(itmp); +# if defined(UNIX) || defined(VMS) + (void)umask(umask_save); +# endif + } +# else + /* Get an arbitrary number of up to 6 digits. When it's + * unlikely that it already exists it will be faster, + * otherwise it doesn't matter. The use of mkdir() avoids any + * security problems because of the predictable number. */ + nr = (mch_get_pid() + (long)time(NULL)) % 1000000L; + itmplen = STRLEN(itmp); + + /* Try up to 10000 different values until we find a name that + * doesn't exist. */ + for (off = 0; off < 10000L; ++off) + { + int r; +# if defined(UNIX) || defined(VMS) + mode_t umask_save; +# endif + + sprintf((char *)itmp + itmplen, "v%ld", nr + off); +# ifndef EEXIST + /* If mkdir() does not set errno to EEXIST, check for + * existing file here. There is a race condition then, + * although it's fail-safe. */ + if (mch_stat((char *)itmp, &st) >= 0) + continue; +# endif +# if defined(UNIX) || defined(VMS) + /* Make sure the umask doesn't remove the executable bit. + * "repl" has been reported to use "177". */ + umask_save = umask(077); +# endif + r = vim_mkdir(itmp, 0700); +# if defined(UNIX) || defined(VMS) + (void)umask(umask_save); +# endif + if (r == 0) + { + vim_settempdir(itmp); + break; + } +# ifdef EEXIST + /* If the mkdir() didn't fail because the file/dir exists, + * we probably can't create any dir here, try another + * place. */ + if (errno != EEXIST) +# endif + break; + } +# endif /* HAVE_MKDTEMP */ + if (vim_tempdir != NULL) + break; + } + } + } + + if (vim_tempdir != NULL) + { + /* There is no need to check if the file exists, because we own the + * directory and nobody else creates a file in it. */ + sprintf((char *)itmp, "%s%ld", vim_tempdir, temp_count++); + return vim_strsave(itmp); + } + + return NULL; + +#else /* TEMPDIRNAMES */ + +# ifdef WIN3264 + char szTempFile[_MAX_PATH + 1]; + char buf4[4]; + char_u *retval; + char_u *p; + + STRCPY(itmp, ""); + if (GetTempPath(_MAX_PATH, szTempFile) == 0) + { + szTempFile[0] = '.'; /* GetTempPath() failed, use current dir */ + szTempFile[1] = NUL; + } + strcpy(buf4, "VIM"); + buf4[2] = extra_char; /* make it "VIa", "VIb", etc. */ + if (GetTempFileName(szTempFile, buf4, 0, (LPSTR)itmp) == 0) + return NULL; + if (!keep) + /* GetTempFileName() will create the file, we don't want that */ + (void)DeleteFile((LPSTR)itmp); + + /* Backslashes in a temp file name cause problems when filtering with + * "sh". NOTE: This also checks 'shellcmdflag' to help those people who + * didn't set 'shellslash'. */ + retval = vim_strsave(itmp); + if (*p_shcf == '-' || p_ssl) + for (p = retval; *p; ++p) + if (*p == '\\') + *p = '/'; + return retval; + +# else /* WIN3264 */ + +# ifdef USE_TMPNAM + char_u *p; + + /* tmpnam() will make its own name */ + p = tmpnam((char *)itmp); + if (p == NULL || *p == NUL) + return NULL; +# else + char_u *p; + +# ifdef VMS_TEMPNAM + /* mktemp() is not working on VMS. It seems to be + * a do-nothing function. Therefore we use tempnam(). + */ + sprintf((char *)itmp, "VIM%c", extra_char); + p = (char_u *)tempnam("tmp:", (char *)itmp); + if (p != NULL) + { + /* VMS will use '.LIS' if we don't explicitly specify an extension, + * and VIM will then be unable to find the file later */ + STRCPY(itmp, p); + STRCAT(itmp, ".txt"); + free(p); + } + else + return NULL; +# else + STRCPY(itmp, TEMPNAME); + if ((p = vim_strchr(itmp, '?')) != NULL) + *p = extra_char; + if (mktemp((char *)itmp) == NULL) + return NULL; +# endif +# endif + + return vim_strsave(itmp); +# endif /* WIN3264 */ +#endif /* TEMPDIRNAMES */ +} + +#if defined(BACKSLASH_IN_FILENAME) || defined(PROTO) +/* + * Convert all backslashes in fname to forward slashes in-place, unless when + * it looks like a URL. + */ + void +forward_slash(char_u *fname) +{ + char_u *p; + + if (path_with_url(fname)) + return; + for (p = fname; *p != NUL; ++p) + /* The Big5 encoding can have '\' in the trail byte. */ + if (enc_dbcs != 0 && (*mb_ptr2len)(p) > 1) + ++p; + else if (*p == '\\') + *p = '/'; +} +#endif + +/* + * Try matching a filename with a "pattern" ("prog" is NULL), or use the + * precompiled regprog "prog" ("pattern" is NULL). That avoids calling + * vim_regcomp() often. + * Used for autocommands and 'wildignore'. + * Returns TRUE if there is a match, FALSE otherwise. + */ + int +match_file_pat( + char_u *pattern, /* pattern to match with */ + regprog_T **prog, /* pre-compiled regprog or NULL */ + char_u *fname, /* full path of file name */ + char_u *sfname, /* short file name or NULL */ + char_u *tail, /* tail of path */ + int allow_dirs) /* allow matching with dir */ +{ + regmatch_T regmatch; + int result = FALSE; + + regmatch.rm_ic = p_fic; /* ignore case if 'fileignorecase' is set */ + if (prog != NULL) + regmatch.regprog = *prog; + else + regmatch.regprog = vim_regcomp(pattern, RE_MAGIC); + + /* + * Try for a match with the pattern with: + * 1. the full file name, when the pattern has a '/'. + * 2. the short file name, when the pattern has a '/'. + * 3. the tail of the file name, when the pattern has no '/'. + */ + if (regmatch.regprog != NULL + && ((allow_dirs + && (vim_regexec(®match, fname, (colnr_T)0) + || (sfname != NULL + && vim_regexec(®match, sfname, (colnr_T)0)))) + || (!allow_dirs && vim_regexec(®match, tail, (colnr_T)0)))) + result = TRUE; + + if (prog != NULL) + *prog = regmatch.regprog; + else + vim_regfree(regmatch.regprog); + return result; +} + +#if defined(FEAT_WILDIGN) || defined(PROTO) +/* + * Return TRUE if a file matches with a pattern in "list". + * "list" is a comma-separated list of patterns, like 'wildignore'. + * "sfname" is the short file name or NULL, "ffname" the long file name. + */ + int +match_file_list(char_u *list, char_u *sfname, char_u *ffname) +{ + char_u buf[100]; + char_u *tail; + char_u *regpat; + char allow_dirs; + int match; + char_u *p; + + tail = gettail(sfname); + + /* try all patterns in 'wildignore' */ + p = list; + while (*p) + { + copy_option_part(&p, buf, 100, ","); + regpat = file_pat_to_reg_pat(buf, NULL, &allow_dirs, FALSE); + if (regpat == NULL) + break; + match = match_file_pat(regpat, NULL, ffname, sfname, + tail, (int)allow_dirs); + vim_free(regpat); + if (match) + return TRUE; + } + return FALSE; +} +#endif + +/* + * Convert the given pattern "pat" which has shell style wildcards in it, into + * a regular expression, and return the result in allocated memory. If there + * is a directory path separator to be matched, then TRUE is put in + * allow_dirs, otherwise FALSE is put there -- webb. + * Handle backslashes before special characters, like "\*" and "\ ". + * + * Returns NULL when out of memory. + */ + char_u * +file_pat_to_reg_pat( + char_u *pat, + char_u *pat_end, /* first char after pattern or NULL */ + char *allow_dirs, /* Result passed back out in here */ + int no_bslash UNUSED) /* Don't use a backward slash as pathsep */ +{ + int size = 2; /* '^' at start, '$' at end */ + char_u *endp; + char_u *reg_pat; + char_u *p; + int i; + int nested = 0; + int add_dollar = TRUE; + + if (allow_dirs != NULL) + *allow_dirs = FALSE; + if (pat_end == NULL) + pat_end = pat + STRLEN(pat); + + for (p = pat; p < pat_end; p++) + { + switch (*p) + { + case '*': + case '.': + case ',': + case '{': + case '}': + case '~': + size += 2; /* extra backslash */ + break; +#ifdef BACKSLASH_IN_FILENAME + case '\\': + case '/': + size += 4; /* could become "[\/]" */ + break; +#endif + default: + size++; + if (enc_dbcs != 0 && (*mb_ptr2len)(p) > 1) + { + ++p; + ++size; + } + break; + } + } + reg_pat = alloc(size + 1); + if (reg_pat == NULL) + return NULL; + + i = 0; + + if (pat[0] == '*') + while (pat[0] == '*' && pat < pat_end - 1) + pat++; + else + reg_pat[i++] = '^'; + endp = pat_end - 1; + if (endp >= pat && *endp == '*') + { + while (endp - pat > 0 && *endp == '*') + endp--; + add_dollar = FALSE; + } + for (p = pat; *p && nested >= 0 && p <= endp; p++) + { + switch (*p) + { + case '*': + reg_pat[i++] = '.'; + reg_pat[i++] = '*'; + while (p[1] == '*') /* "**" matches like "*" */ + ++p; + break; + case '.': + case '~': + reg_pat[i++] = '\\'; + reg_pat[i++] = *p; + break; + case '?': + reg_pat[i++] = '.'; + break; + case '\\': + if (p[1] == NUL) + break; +#ifdef BACKSLASH_IN_FILENAME + if (!no_bslash) + { + /* translate: + * "\x" to "\\x" e.g., "dir\file" + * "\*" to "\\.*" e.g., "dir\*.c" + * "\?" to "\\." e.g., "dir\??.c" + * "\+" to "\+" e.g., "fileX\+.c" + */ + if ((vim_isfilec(p[1]) || p[1] == '*' || p[1] == '?') + && p[1] != '+') + { + reg_pat[i++] = '['; + reg_pat[i++] = '\\'; + reg_pat[i++] = '/'; + reg_pat[i++] = ']'; + if (allow_dirs != NULL) + *allow_dirs = TRUE; + break; + } + } +#endif + /* Undo escaping from ExpandEscape(): + * foo\?bar -> foo?bar + * foo\%bar -> foo%bar + * foo\,bar -> foo,bar + * foo\ bar -> foo bar + * Don't unescape \, * and others that are also special in a + * regexp. + * An escaped { must be unescaped since we use magic not + * verymagic. Use "\\\{n,m\}"" to get "\{n,m}". + */ + if (*++p == '?' +#ifdef BACKSLASH_IN_FILENAME + && no_bslash +#endif + ) + reg_pat[i++] = '?'; + else + if (*p == ',' || *p == '%' || *p == '#' + || vim_isspace(*p) || *p == '{' || *p == '}') + reg_pat[i++] = *p; + else if (*p == '\\' && p[1] == '\\' && p[2] == '{') + { + reg_pat[i++] = '\\'; + reg_pat[i++] = '{'; + p += 2; + } + else + { + if (allow_dirs != NULL && vim_ispathsep(*p) +#ifdef BACKSLASH_IN_FILENAME + && (!no_bslash || *p != '\\') +#endif + ) + *allow_dirs = TRUE; + reg_pat[i++] = '\\'; + reg_pat[i++] = *p; + } + break; +#ifdef BACKSLASH_IN_FILENAME + case '/': + reg_pat[i++] = '['; + reg_pat[i++] = '\\'; + reg_pat[i++] = '/'; + reg_pat[i++] = ']'; + if (allow_dirs != NULL) + *allow_dirs = TRUE; + break; +#endif + case '{': + reg_pat[i++] = '\\'; + reg_pat[i++] = '('; + nested++; + break; + case '}': + reg_pat[i++] = '\\'; + reg_pat[i++] = ')'; + --nested; + break; + case ',': + if (nested) + { + reg_pat[i++] = '\\'; + reg_pat[i++] = '|'; + } + else + reg_pat[i++] = ','; + break; + default: + if (enc_dbcs != 0 && (*mb_ptr2len)(p) > 1) + reg_pat[i++] = *p++; + else if (allow_dirs != NULL && vim_ispathsep(*p)) + *allow_dirs = TRUE; + reg_pat[i++] = *p; + break; + } + } + if (add_dollar) + reg_pat[i++] = '$'; + reg_pat[i] = NUL; + if (nested != 0) + { + if (nested < 0) + emsg(_("E219: Missing {.")); + else + emsg(_("E220: Missing }.")); + VIM_CLEAR(reg_pat); + } + return reg_pat; +} + +#if defined(EINTR) || defined(PROTO) +/* + * Version of read() that retries when interrupted by EINTR (possibly + * by a SIGWINCH). + */ + long +read_eintr(int fd, void *buf, size_t bufsize) +{ + long ret; + + for (;;) + { + ret = vim_read(fd, buf, bufsize); + if (ret >= 0 || errno != EINTR) + break; + } + return ret; +} + +/* + * Version of write() that retries when interrupted by EINTR (possibly + * by a SIGWINCH). + */ + long +write_eintr(int fd, void *buf, size_t bufsize) +{ + long ret = 0; + long wlen; + + /* Repeat the write() so long it didn't fail, other than being interrupted + * by a signal. */ + while (ret < (long)bufsize) + { + wlen = vim_write(fd, (char *)buf + ret, bufsize - ret); + if (wlen < 0) + { + if (errno != EINTR) + break; + } + else + ret += wlen; + } + return ret; +} +#endif |