diff options
Diffstat (limited to '')
| -rw-r--r-- | support/htpasswd.c | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/support/htpasswd.c b/support/htpasswd.c new file mode 100644 index 0000000..660a27c --- /dev/null +++ b/support/htpasswd.c @@ -0,0 +1,524 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/****************************************************************************** + ****************************************************************************** + * NOTE! This program is not safe as a setuid executable! Do not make it + * setuid! + ****************************************************************************** + *****************************************************************************/ +/* + * htpasswd.c: simple program for manipulating password file for + * the Apache HTTP server + * + * Originally by Rob McCool + * + * Exit values: + * 0: Success + * 1: Failure; file access/permission problem + * 2: Failure; command line syntax problem (usage message issued) + * 3: Failure; password verification failure + * 4: Failure; operation interrupted (such as with CTRL/C) + * 5: Failure; buffer would overflow (username, filename, or computed + * record too long) + * 6: Failure; username contains illegal or reserved characters + * 7: Failure; file is not a valid htpasswd file + */ + +#include "passwd_common.h" +#include "apr_signal.h" +#include "apr_getopt.h" + +#if APR_HAVE_STDIO_H +#include <stdio.h> +#endif + +#include "apr_md5.h" +#include "apr_sha1.h" + +#if APR_HAVE_STDLIB_H +#include <stdlib.h> +#endif +#if APR_HAVE_STRING_H +#include <string.h> +#endif +#if APR_HAVE_UNISTD_H +#include <unistd.h> +#endif + +#ifdef WIN32 +#include <conio.h> +#define unlink _unlink +#endif + +#define APHTP_NEWFILE 1 +#define APHTP_NOFILE 2 +#define APHTP_DELUSER 4 +#define APHTP_VERIFY 8 + +apr_file_t *ftemp = NULL; + +static int mkrecord(struct passwd_ctx *ctx, char *user) +{ + char hash_str[MAX_STRING_LEN]; + int ret; + + ctx->out = hash_str; + ctx->out_len = sizeof(hash_str); + + ret = mkhash(ctx); + if (ret) { + ctx->out = NULL; + ctx->out_len = 0; + return ret; + } + + ctx->out = apr_pstrcat(ctx->pool, user, ":", hash_str, NL, NULL); + ctx->out_len = strlen(ctx->out); + if (ctx->out_len >= MAX_STRING_LEN) { + ctx->errstr = "resultant record too long"; + return ERR_OVERFLOW; + } + return 0; +} + +static void usage(void) +{ + apr_file_printf(errfile, "Usage:" NL + "\thtpasswd [-cimBdpsDv] [-C cost] passwordfile username" NL + "\thtpasswd -b[cmBdpsDv] [-C cost] passwordfile username password" NL + NL + "\thtpasswd -n[imBdps] [-C cost] username" NL + "\thtpasswd -nb[mBdps] [-C cost] username password" NL + " -c Create a new file." NL + " -n Don't update file; display results on stdout." NL + " -b Use the password from the command line rather than prompting " + "for it." NL + " -i Read password from stdin without verification (for script usage)." NL + " -m Force MD5 encryption of the password (default)." NL + " -B Force bcrypt encryption of the password (very secure)." NL + " -C Set the computing time used for the bcrypt algorithm" NL + " (higher is more secure but slower, default: %d, valid: 4 to 31)." NL + " -d Force CRYPT encryption of the password (8 chars max, insecure)." NL + " -s Force SHA encryption of the password (insecure)." NL + " -p Do not encrypt the password (plaintext, insecure)." NL + " -D Delete the specified user." NL + " -v Verify password for the specified user." NL + "On other systems than Windows and NetWare the '-p' flag will " + "probably not work." NL + "The SHA algorithm does not use a salt and is less secure than the " + "MD5 algorithm." NL, + BCRYPT_DEFAULT_COST + ); + exit(ERR_SYNTAX); +} + +/* + * Check to see if the specified file can be opened for the given + * access. + */ +static int accessible(apr_pool_t *pool, char *fname, int mode) +{ + apr_file_t *f = NULL; + + if (apr_file_open(&f, fname, mode, APR_OS_DEFAULT, pool) != APR_SUCCESS) { + return 0; + } + apr_file_close(f); + return 1; +} + +/* + * Return true if the named file exists, regardless of permissions. + */ +static int exists(char *fname, apr_pool_t *pool) +{ + apr_finfo_t sbuf; + apr_status_t check; + + check = apr_stat(&sbuf, fname, APR_FINFO_TYPE, pool); + return ((check || sbuf.filetype != APR_REG) ? 0 : 1); +} + +static void terminate(void) +{ + apr_terminate(); +#ifdef NETWARE + pressanykey(); +#endif +} + +static void check_args(int argc, const char *const argv[], + struct passwd_ctx *ctx, unsigned *mask, char **user, + char **pwfilename) +{ + const char *arg; + int args_left = 2; + int i, ret; + apr_getopt_t *state; + apr_status_t rv; + char opt; + const char *opt_arg; + apr_pool_t *pool = ctx->pool; + + rv = apr_getopt_init(&state, pool, argc, argv); + if (rv != APR_SUCCESS) + exit(ERR_SYNTAX); + + while ((rv = apr_getopt(state, "cnmspdBbDiC:v", &opt, &opt_arg)) == APR_SUCCESS) { + switch (opt) { + case 'c': + *mask |= APHTP_NEWFILE; + break; + case 'n': + args_left--; + *mask |= APHTP_NOFILE; + break; + case 'D': + *mask |= APHTP_DELUSER; + break; + case 'v': + *mask |= APHTP_VERIFY; + break; + default: + ret = parse_common_options(ctx, opt, opt_arg); + if (ret) { + apr_file_printf(errfile, "%s: %s" NL, argv[0], ctx->errstr); + exit(ret); + } + } + } + if (ctx->passwd_src == PW_ARG) + args_left++; + if (rv != APR_EOF) + usage(); + + if ((*mask) & (*mask - 1)) { + /* not a power of two, i.e. more than one flag specified */ + apr_file_printf(errfile, "%s: only one of -c -n -v -D may be specified" NL, + argv[0]); + exit(ERR_SYNTAX); + } + if ((*mask & APHTP_VERIFY) && ctx->passwd_src == PW_PROMPT) + ctx->passwd_src = PW_PROMPT_VERIFY; + + /* + * Make sure we still have exactly the right number of arguments left + * (the filename, the username, and possibly the password if -b was + * specified). + */ + i = state->ind; + if ((argc - i) != args_left) { + usage(); + } + + if (!(*mask & APHTP_NOFILE)) { + if (strlen(argv[i]) > (APR_PATH_MAX - 1)) { + apr_file_printf(errfile, "%s: filename too long" NL, argv[0]); + exit(ERR_OVERFLOW); + } + *pwfilename = apr_pstrdup(pool, argv[i++]); + } + if (strlen(argv[i]) > (MAX_STRING_LEN - 1)) { + apr_file_printf(errfile, "%s: username too long (> %d)" NL, + argv[0], MAX_STRING_LEN - 1); + exit(ERR_OVERFLOW); + } + *user = apr_pstrdup(pool, argv[i++]); + if ((arg = strchr(*user, ':')) != NULL) { + apr_file_printf(errfile, "%s: username contains illegal " + "character '%c'" NL, argv[0], *arg); + exit(ERR_BADUSER); + } + if (ctx->passwd_src == PW_ARG) { + if (strlen(argv[i]) > (MAX_STRING_LEN - 1)) { + apr_file_printf(errfile, "%s: password too long (> %d)" NL, + argv[0], MAX_STRING_LEN); + exit(ERR_OVERFLOW); + } + ctx->passwd = apr_pstrdup(pool, argv[i]); + } +} + +static int verify(struct passwd_ctx *ctx, const char *hash) +{ + apr_status_t rv; + int ret; + + if (ctx->passwd == NULL && (ret = get_password(ctx)) != 0) + return ret; + rv = apr_password_validate(ctx->passwd, hash); + if (rv == APR_SUCCESS) + return 0; + if (APR_STATUS_IS_EMISMATCH(rv)) { + ctx->errstr = "password verification failed"; + return ERR_PWMISMATCH; + } + ctx->errstr = apr_psprintf(ctx->pool, "Could not verify password: %pm", + &rv); + return ERR_GENERAL; +} + +/* + * Let's do it. We end up doing a lot of file opening and closing, + * but what do we care? This application isn't run constantly. + */ +int main(int argc, const char * const argv[]) +{ + apr_file_t *fpw = NULL; + char line[MAX_STRING_LEN]; + char *pwfilename = NULL; + char *user = NULL; + char tn[] = "htpasswd.tmp.XXXXXX"; + char *dirname; + char *scratch, cp[MAX_STRING_LEN]; + int found = 0; + int i; + unsigned mask = 0; + apr_pool_t *pool; + int existing_file = 0; + struct passwd_ctx ctx = { 0 }; +#if APR_CHARSET_EBCDIC + apr_status_t rv; + apr_xlate_t *to_ascii; +#endif + + apr_app_initialize(&argc, &argv, NULL); + atexit(terminate); + apr_pool_create(&pool, NULL); + apr_pool_abort_set(abort_on_oom, pool); + apr_file_open_stderr(&errfile, pool); + ctx.pool = pool; + ctx.alg = ALG_APMD5; + +#if APR_CHARSET_EBCDIC + rv = apr_xlate_open(&to_ascii, "ISO-8859-1", APR_DEFAULT_CHARSET, pool); + if (rv) { + apr_file_printf(errfile, "apr_xlate_open(to ASCII)->%d" NL, rv); + exit(1); + } + rv = apr_SHA1InitEBCDIC(to_ascii); + if (rv) { + apr_file_printf(errfile, "apr_SHA1InitEBCDIC()->%d" NL, rv); + exit(1); + } + rv = apr_MD5InitEBCDIC(to_ascii); + if (rv) { + apr_file_printf(errfile, "apr_MD5InitEBCDIC()->%d" NL, rv); + exit(1); + } +#endif /*APR_CHARSET_EBCDIC*/ + + check_args(argc, argv, &ctx, &mask, &user, &pwfilename); + + /* + * Only do the file checks if we're supposed to frob it. + */ + if (!(mask & APHTP_NOFILE)) { + existing_file = exists(pwfilename, pool); + if (existing_file && (mask & APHTP_VERIFY) == 0) { + /* + * Check that this existing file is readable and writable. + */ + if (!accessible(pool, pwfilename, APR_FOPEN_READ|APR_FOPEN_WRITE)) { + apr_file_printf(errfile, "%s: cannot open file %s for " + "read/write access" NL, argv[0], pwfilename); + exit(ERR_FILEPERM); + } + } + else if (existing_file && (mask & APHTP_VERIFY) != 0) { + /* + * Check that this existing file is readable. + */ + if (!accessible(pool, pwfilename, APR_FOPEN_READ)) { + apr_file_printf(errfile, "%s: cannot open file %s for " + "read access" NL, argv[0], pwfilename); + exit(ERR_FILEPERM); + } + } + else { + /* + * Error out if -c was omitted for this non-existant file. + */ + if (!(mask & APHTP_NEWFILE)) { + apr_file_printf(errfile, + "%s: cannot modify file %s; use '-c' to create it" NL, + argv[0], pwfilename); + exit(ERR_FILEPERM); + } + /* + * As it doesn't exist yet, verify that we can create it. + */ + if (!accessible(pool, pwfilename, APR_FOPEN_WRITE|APR_FOPEN_CREATE)) { + apr_file_printf(errfile, "%s: cannot create file %s" NL, + argv[0], pwfilename); + exit(ERR_FILEPERM); + } + } + } + + /* + * All the file access checks (if any) have been made. Time to go to work; + * try to create the record for the username in question. If that + * fails, there's no need to waste any time on file manipulations. + * Any error message text is returned in the record buffer, since + * the mkrecord() routine doesn't have access to argv[]. + */ + if ((mask & (APHTP_DELUSER|APHTP_VERIFY)) == 0) { + i = mkrecord(&ctx, user); + if (i != 0) { + apr_file_printf(errfile, "%s: %s" NL, argv[0], ctx.errstr); + exit(i); + } + if (mask & APHTP_NOFILE) { + printf("%s" NL, ctx.out); + exit(0); + } + } + + if ((mask & APHTP_VERIFY) == 0) { + /* + * We can access the files the right way, and we have a record + * to add or update. Let's do it.. + */ + if (apr_temp_dir_get((const char**)&dirname, pool) != APR_SUCCESS) { + apr_file_printf(errfile, "%s: could not determine temp dir" NL, + argv[0]); + exit(ERR_FILEPERM); + } + dirname = apr_psprintf(pool, "%s/%s", dirname, tn); + + if (apr_file_mktemp(&ftemp, dirname, 0, pool) != APR_SUCCESS) { + apr_file_printf(errfile, "%s: unable to create temporary file %s" NL, + argv[0], dirname); + exit(ERR_FILEPERM); + } + } + + /* + * If we're not creating a new file, copy records from the existing + * one to the temporary file until we find the specified user. + */ + if (existing_file && !(mask & APHTP_NEWFILE)) { + if (apr_file_open(&fpw, pwfilename, APR_READ | APR_BUFFERED, + APR_OS_DEFAULT, pool) != APR_SUCCESS) { + apr_file_printf(errfile, "%s: unable to read file %s" NL, + argv[0], pwfilename); + exit(ERR_FILEPERM); + } + while (apr_file_gets(line, sizeof(line), fpw) == APR_SUCCESS) { + char *colon; + + strcpy(cp, line); + scratch = cp; + while (apr_isspace(*scratch)) { + ++scratch; + } + + if (!*scratch || (*scratch == '#')) { + putline(ftemp, line); + continue; + } + /* + * See if this is our user. + */ + colon = strchr(scratch, ':'); + if (colon != NULL) { + *colon = '\0'; + } + else { + /* + * If we've not got a colon on the line, this could well + * not be a valid htpasswd file. + * We should bail at this point. + */ + apr_file_printf(errfile, "%s: The file %s does not appear " + "to be a valid htpasswd file." NL, + argv[0], pwfilename); + apr_file_close(fpw); + exit(ERR_INVALID); + } + if (strcmp(user, scratch) != 0) { + putline(ftemp, line); + continue; + } + else { + /* We found the user we were looking for */ + found++; + if ((mask & APHTP_DELUSER)) { + /* Delete entry from the file */ + apr_file_printf(errfile, "Deleting "); + } + else if ((mask & APHTP_VERIFY)) { + /* Verify */ + char *hash = colon + 1; + size_t len; + + len = strcspn(hash, "\r\n"); + if (len == 0) { + apr_file_printf(errfile, "Empty hash for user %s" NL, + user); + exit(ERR_INVALID); + } + hash[len] = '\0'; + + i = verify(&ctx, hash); + if (i != 0) { + apr_file_printf(errfile, "%s" NL, ctx.errstr); + exit(i); + } + } + else { + /* Update entry */ + apr_file_printf(errfile, "Updating "); + putline(ftemp, ctx.out); + } + } + } + apr_file_close(fpw); + } + if (!found) { + if (mask & APHTP_DELUSER) { + apr_file_printf(errfile, "User %s not found" NL, user); + exit(0); + } + else if (mask & APHTP_VERIFY) { + apr_file_printf(errfile, "User %s not found" NL, user); + exit(ERR_BADUSER); + } + else { + apr_file_printf(errfile, "Adding "); + putline(ftemp, ctx.out); + } + } + if (mask & APHTP_VERIFY) { + apr_file_printf(errfile, "Password for user %s correct." NL, user); + exit(0); + } + + apr_file_printf(errfile, "password for user %s" NL, user); + + /* The temporary file has all the data, just copy it to the new location. + */ + if (apr_file_copy(dirname, pwfilename, APR_OS_DEFAULT, pool) != + APR_SUCCESS) { + apr_file_printf(errfile, "%s: unable to update file %s" NL, + argv[0], pwfilename); + exit(ERR_FILEPERM); + } + apr_file_close(ftemp); + return 0; +} |