diff options
Diffstat (limited to '')
| -rw-r--r-- | lib/readline/doc/rltech.texi | 2731 |
1 files changed, 2731 insertions, 0 deletions
diff --git a/lib/readline/doc/rltech.texi b/lib/readline/doc/rltech.texi new file mode 100644 index 0000000..28a02d9 --- /dev/null +++ b/lib/readline/doc/rltech.texi @@ -0,0 +1,2731 @@ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rltech.info +@comment %**end of header (This is for running Texinfo on a region.) + +@ifinfo +This document describes the GNU Readline Library, a utility for aiding +in the consistency of user interface across discrete programs that need +to provide a command line interface. + +Copyright (C) 1988--2016 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +pare preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ifinfo + +@node Programming with GNU Readline +@chapter Programming with GNU Readline + +This chapter describes the interface between the @sc{gnu} Readline Library and +other programs. If you are a programmer, and you wish to include the +features found in @sc{gnu} Readline +such as completion, line editing, and interactive history manipulation +in your own programs, this section is for you. + +@menu +* Basic Behavior:: Using the default behavior of Readline. +* Custom Functions:: Adding your own functions to Readline. +* Readline Variables:: Variables accessible to custom + functions. +* Readline Convenience Functions:: Functions which Readline supplies to + aid in writing your own custom + functions. +* Readline Signal Handling:: How Readline behaves when it receives signals. +* Custom Completers:: Supplanting or supplementing Readline's + completion functions. +@end menu + +@node Basic Behavior +@section Basic Behavior + +Many programs provide a command line interface, such as @code{mail}, +@code{ftp}, and @code{sh}. For such programs, the default behaviour of +Readline is sufficient. This section describes how to use Readline in +the simplest way possible, perhaps to replace calls in your code to +@code{gets()} or @code{fgets()}. + +@findex readline +@cindex readline, function + +The function @code{readline()} prints a prompt @var{prompt} +and then reads and returns a single line of text from the user. +If @var{prompt} is @code{NULL} or the empty string, no prompt is displayed. +The line @code{readline} returns is allocated with @code{malloc()}; +the caller should @code{free()} the line when it has finished with it. +The declaration for @code{readline} in ANSI C is + +@example +@code{char *readline (const char *@var{prompt});} +@end example + +@noindent +So, one might say +@example +@code{char *line = readline ("Enter a line: ");} +@end example +@noindent +in order to read a line of text from the user. +The line returned has the final newline removed, so only the +text remains. + +If @code{readline} encounters an @code{EOF} while reading the line, and the +line is empty at that point, then @code{(char *)NULL} is returned. +Otherwise, the line is ended just as if a newline had been typed. + +Readline performs some expansion on the @var{prompt} before it is +displayed on the screen. See the description of @code{rl_expand_prompt} +(@pxref{Redisplay}) for additional details, especially if @var{prompt} +will contain characters that do not consume physical screen space when +displayed. + +If you want the user to be able to get at the line later, (with +@key{C-p} for example), you must call @code{add_history()} to save the +line away in a @dfn{history} list of such lines. + +@example +@code{add_history (line)}; +@end example + +@noindent +For full details on the GNU History Library, see the associated manual. + +It is preferable to avoid saving empty lines on the history list, since +users rarely have a burning need to reuse a blank line. Here is +a function which usefully replaces the standard @code{gets()} library +function, and has the advantage of no static buffer to overflow: + +@example +/* A static variable for holding the line. */ +static char *line_read = (char *)NULL; + +/* Read a string, and return a pointer to it. + Returns NULL on EOF. */ +char * +rl_gets () +@{ + /* If the buffer has already been allocated, + return the memory to the free pool. */ + if (line_read) + @{ + free (line_read); + line_read = (char *)NULL; + @} + + /* Get a line from the user. */ + line_read = readline (""); + + /* If the line has any text in it, + save it on the history. */ + if (line_read && *line_read) + add_history (line_read); + + return (line_read); +@} +@end example + +This function gives the user the default behaviour of @key{TAB} +completion: completion on file names. If you do not want Readline to +complete on filenames, you can change the binding of the @key{TAB} key +with @code{rl_bind_key()}. + +@example +@code{int rl_bind_key (int @var{key}, rl_command_func_t *@var{function});} +@end example + +@code{rl_bind_key()} takes two arguments: @var{key} is the character that +you want to bind, and @var{function} is the address of the function to +call when @var{key} is pressed. Binding @key{TAB} to @code{rl_insert()} +makes @key{TAB} insert itself. +@code{rl_bind_key()} returns non-zero if @var{key} is not a valid +ASCII character code (between 0 and 255). + +Thus, to disable the default @key{TAB} behavior, the following suffices: +@example +@code{rl_bind_key ('\t', rl_insert);} +@end example + +This code should be executed once at the start of your program; you +might write a function called @code{initialize_readline()} which +performs this and other desired initializations, such as installing +custom completers (@pxref{Custom Completers}). + +@node Custom Functions +@section Custom Functions + +Readline provides many functions for manipulating the text of +the line, but it isn't possible to anticipate the needs of all +programs. This section describes the various functions and variables +defined within the Readline library which allow a user program to add +customized functionality to Readline. + +Before declaring any functions that customize Readline's behavior, or +using any functionality Readline provides in other code, an +application writer should include the file @code{<readline/readline.h>} +in any file that uses Readline's features. Since some of the definitions +in @code{readline.h} use the @code{stdio} library, the file +@code{<stdio.h>} should be included before @code{readline.h}. + +@code{readline.h} defines a C preprocessor variable that should +be treated as an integer, @code{RL_READLINE_VERSION}, which may +be used to conditionally compile application code depending on +the installed Readline version. The value is a hexadecimal +encoding of the major and minor version numbers of the library, +of the form 0x@var{MMmm}. @var{MM} is the two-digit major +version number; @var{mm} is the two-digit minor version number. +For Readline 4.2, for example, the value of +@code{RL_READLINE_VERSION} would be @code{0x0402}. + +@menu +* Readline Typedefs:: C declarations to make code readable. +* Function Writing:: Variables and calling conventions. +@end menu + +@node Readline Typedefs +@subsection Readline Typedefs + +For readability, we declare a number of new object types, all pointers +to functions. + +The reason for declaring these new types is to make it easier to write +code describing pointers to C functions with appropriately prototyped +arguments and return values. + +For instance, say we want to declare a variable @var{func} as a pointer +to a function which takes two @code{int} arguments and returns an +@code{int} (this is the type of all of the Readline bindable functions). +Instead of the classic C declaration + +@code{int (*func)();} + +@noindent +or the ANSI-C style declaration + +@code{int (*func)(int, int);} + +@noindent +we may write + +@code{rl_command_func_t *func;} + +The full list of function pointer types available is + +@table @code +@item typedef int rl_command_func_t (int, int); + +@item typedef char *rl_compentry_func_t (const char *, int); + +@item typedef char **rl_completion_func_t (const char *, int, int); + +@item typedef char *rl_quote_func_t (char *, int, char *); + +@item typedef char *rl_dequote_func_t (char *, int); + +@item typedef int rl_compignore_func_t (char **); + +@item typedef void rl_compdisp_func_t (char **, int, int); + +@item typedef int rl_hook_func_t (void); + +@item typedef int rl_getc_func_t (FILE *); + +@item typedef int rl_linebuf_func_t (char *, int); + +@item typedef int rl_intfunc_t (int); +@item #define rl_ivoidfunc_t rl_hook_func_t +@item typedef int rl_icpfunc_t (char *); +@item typedef int rl_icppfunc_t (char **); + +@item typedef void rl_voidfunc_t (void); +@item typedef void rl_vintfunc_t (int); +@item typedef void rl_vcpfunc_t (char *); +@item typedef void rl_vcppfunc_t (char **); + +@end table + +@node Function Writing +@subsection Writing a New Function + +In order to write new functions for Readline, you need to know the +calling conventions for keyboard-invoked functions, and the names of the +variables that describe the current state of the line read so far. + +The calling sequence for a command @code{foo} looks like + +@example +@code{int foo (int count, int key)} +@end example + +@noindent +where @var{count} is the numeric argument (or 1 if defaulted) and +@var{key} is the key that invoked this function. + +It is completely up to the function as to what should be done with the +numeric argument. Some functions use it as a repeat count, some +as a flag, and others to choose alternate behavior (refreshing the current +line as opposed to refreshing the screen, for example). Some choose to +ignore it. In general, if a +function uses the numeric argument as a repeat count, it should be able +to do something useful with both negative and positive arguments. +At the very least, it should be aware that it can be passed a +negative argument. + +A command function should return 0 if its action completes successfully, +and a value greater than zero if some error occurs. +This is the convention obeyed by all of the builtin Readline bindable +command functions. + +@node Readline Variables +@section Readline Variables + +These variables are available to function writers. + +@deftypevar {char *} rl_line_buffer +This is the line gathered so far. You are welcome to modify the +contents of the line, but see @ref{Allowing Undoing}. The +function @code{rl_extend_line_buffer} is available to increase +the memory allocated to @code{rl_line_buffer}. +@end deftypevar + +@deftypevar int rl_point +The offset of the current cursor position in @code{rl_line_buffer} +(the @emph{point}). +@end deftypevar + +@deftypevar int rl_end +The number of characters present in @code{rl_line_buffer}. When +@code{rl_point} is at the end of the line, @code{rl_point} and +@code{rl_end} are equal. +@end deftypevar + +@deftypevar int rl_mark +The @var{mark} (saved position) in the current line. If set, the mark +and point define a @emph{region}. +@end deftypevar + +@deftypevar int rl_done +Setting this to a non-zero value causes Readline to return the current +line immediately. +@end deftypevar + +@deftypevar int rl_num_chars_to_read +Setting this to a positive value before calling @code{readline()} causes +Readline to return after accepting that many characters, rather +than reading up to a character bound to @code{accept-line}. +@end deftypevar + +@deftypevar int rl_pending_input +Setting this to a value makes it the next keystroke read. This is a +way to stuff a single character into the input stream. +@end deftypevar + +@deftypevar int rl_dispatching +Set to a non-zero value if a function is being called from a key binding; +zero otherwise. Application functions can test this to discover whether +they were called directly or by Readline's dispatching mechanism. +@end deftypevar + +@deftypevar int rl_erase_empty_line +Setting this to a non-zero value causes Readline to completely erase +the current line, including any prompt, any time a newline is typed as +the only character on an otherwise-empty line. The cursor is moved to +the beginning of the newly-blank line. +@end deftypevar + +@deftypevar {char *} rl_prompt +The prompt Readline uses. This is set from the argument to +@code{readline()}, and should not be assigned to directly. +The @code{rl_set_prompt()} function (@pxref{Redisplay}) may +be used to modify the prompt string after calling @code{readline()}. +@end deftypevar + +@deftypevar {char *} rl_display_prompt +The string displayed as the prompt. This is usually identical to +@var{rl_prompt}, but may be changed temporarily by functions that +use the prompt string as a message area, such as incremental search. +@end deftypevar + +@deftypevar int rl_already_prompted +If an application wishes to display the prompt itself, rather than have +Readline do it the first time @code{readline()} is called, it should set +this variable to a non-zero value after displaying the prompt. +The prompt must also be passed as the argument to @code{readline()} so +the redisplay functions can update the display properly. +The calling application is responsible for managing the value; Readline +never sets it. +@end deftypevar + +@deftypevar {const char *} rl_library_version +The version number of this revision of the library. +@end deftypevar + +@deftypevar int rl_readline_version +An integer encoding the current version of the library. The encoding is +of the form 0x@var{MMmm}, where @var{MM} is the two-digit major version +number, and @var{mm} is the two-digit minor version number. +For example, for Readline-4.2, @code{rl_readline_version} would have the +value 0x0402. +@end deftypevar + +@deftypevar {int} rl_gnu_readline_p +Always set to 1, denoting that this is @sc{gnu} readline rather than some +emulation. +@end deftypevar + +@deftypevar {const char *} rl_terminal_name +The terminal type, used for initialization. If not set by the application, +Readline sets this to the value of the @env{TERM} environment variable +the first time it is called. +@end deftypevar + +@deftypevar {const char *} rl_readline_name +This variable is set to a unique name by each application using Readline. +The value allows conditional parsing of the inputrc file +(@pxref{Conditional Init Constructs}). +@end deftypevar + +@deftypevar {FILE *} rl_instream +The stdio stream from which Readline reads input. +If @code{NULL}, Readline defaults to @var{stdin}. +@end deftypevar + +@deftypevar {FILE *} rl_outstream +The stdio stream to which Readline performs output. +If @code{NULL}, Readline defaults to @var{stdout}. +@end deftypevar + +@deftypevar int rl_prefer_env_winsize +If non-zero, Readline gives values found in the @env{LINES} and +@env{COLUMNS} environment variables greater precedence than values fetched +from the kernel when computing the screen dimensions. +@end deftypevar + +@deftypevar {rl_command_func_t *} rl_last_func +The address of the last command function Readline executed. May be used to +test whether or not a function is being executed twice in succession, for +example. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_startup_hook +If non-zero, this is the address of a function to call just +before @code{readline} prints the first prompt. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_pre_input_hook +If non-zero, this is the address of a function to call after +the first prompt has been printed and just before @code{readline} +starts reading input characters. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_event_hook +If non-zero, this is the address of a function to call periodically +when Readline is waiting for terminal input. +By default, this will be called at most ten times a second if there +is no keyboard input. +@end deftypevar + +@deftypevar {rl_getc_func_t *} rl_getc_function +If non-zero, Readline will call indirectly through this pointer +to get a character from the input stream. By default, it is set to +@code{rl_getc}, the default Readline character input function +(@pxref{Character Input}). +In general, an application that sets @var{rl_getc_function} should consider +setting @var{rl_input_available_hook} as well. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_signal_event_hook +If non-zero, this is the address of a function to call if a read system +call is interrupted when Readline is reading terminal input. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_input_available_hook +If non-zero, Readline will use this function's return value when it needs +to determine whether or not there is available input on the current input +source. +The default hook checks @code{rl_instream}; if an application is using a +different input source, it should set the hook appropriately. +Readline queries for available input when implementing intra-key-sequence +timeouts during input and incremental searches. +This may use an application-specific timeout before returning a value; +Readline uses the value passed to @code{rl_set_keyboard_input_timeout()} +or the value of the user-settable @var{keyseq-timeout} variable. +This is designed for use by applications using Readline's callback interface +(@pxref{Alternate Interface}), which may not use the traditional +@code{read(2)} and file descriptor interface, or other applications using +a different input mechanism. +If an application uses an input mechanism or hook that can potentially exceed +the value of @var{keyseq-timeout}, it should increase the timeout or set +this hook appropriately even when not using the callback interface. +In general, an application that sets @var{rl_getc_function} should consider +setting @var{rl_input_available_hook} as well. +@end deftypevar + +@deftypevar {rl_voidfunc_t *} rl_redisplay_function +If non-zero, Readline will call indirectly through this pointer +to update the display with the current contents of the editing buffer. +By default, it is set to @code{rl_redisplay}, the default Readline +redisplay function (@pxref{Redisplay}). +@end deftypevar + +@deftypevar {rl_vintfunc_t *} rl_prep_term_function +If non-zero, Readline will call indirectly through this pointer +to initialize the terminal. The function takes a single argument, an +@code{int} flag that says whether or not to use eight-bit characters. +By default, this is set to @code{rl_prep_terminal} +(@pxref{Terminal Management}). +@end deftypevar + +@deftypevar {rl_voidfunc_t *} rl_deprep_term_function +If non-zero, Readline will call indirectly through this pointer +to reset the terminal. This function should undo the effects of +@code{rl_prep_term_function}. +By default, this is set to @code{rl_deprep_terminal} +(@pxref{Terminal Management}). +@end deftypevar + +@deftypevar {Keymap} rl_executing_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +currently executing readline function was found. +@end deftypevar + +@deftypevar {Keymap} rl_binding_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +last key binding occurred. +@end deftypevar + +@deftypevar {char *} rl_executing_macro +This variable is set to the text of any currently-executing macro. +@end deftypevar + +@deftypevar int rl_executing_key +The key that caused the dispatch to the currently-executing Readline function. +@end deftypevar + +@deftypevar {char *} rl_executing_keyseq +The full key sequence that caused the dispatch to the currently-executing +Readline function. +@end deftypevar + +@deftypevar int rl_key_sequence_length +The number of characters in @var{rl_executing_keyseq}. +@end deftypevar + +@deftypevar {int} rl_readline_state +A variable with bit values that encapsulate the current Readline state. +A bit is set with the @code{RL_SETSTATE} macro, and unset with the +@code{RL_UNSETSTATE} macro. Use the @code{RL_ISSTATE} macro to test +whether a particular state bit is set. Current state bits include: + +@table @code +@item RL_STATE_NONE +Readline has not yet been called, nor has it begun to initialize. +@item RL_STATE_INITIALIZING +Readline is initializing its internal data structures. +@item RL_STATE_INITIALIZED +Readline has completed its initialization. +@item RL_STATE_TERMPREPPED +Readline has modified the terminal modes to do its own input and redisplay. +@item RL_STATE_READCMD +Readline is reading a command from the keyboard. +@item RL_STATE_METANEXT +Readline is reading more input after reading the meta-prefix character. +@item RL_STATE_DISPATCHING +Readline is dispatching to a command. +@item RL_STATE_MOREINPUT +Readline is reading more input while executing an editing command. +@item RL_STATE_ISEARCH +Readline is performing an incremental history search. +@item RL_STATE_NSEARCH +Readline is performing a non-incremental history search. +@item RL_STATE_SEARCH +Readline is searching backward or forward through the history for a string. +@item RL_STATE_NUMERICARG +Readline is reading a numeric argument. +@item RL_STATE_MACROINPUT +Readline is currently getting its input from a previously-defined keyboard +macro. +@item RL_STATE_MACRODEF +Readline is currently reading characters defining a keyboard macro. +@item RL_STATE_OVERWRITE +Readline is in overwrite mode. +@item RL_STATE_COMPLETING +Readline is performing word completion. +@item RL_STATE_SIGHANDLER +Readline is currently executing the readline signal handler. +@item RL_STATE_UNDOING +Readline is performing an undo. +@item RL_STATE_INPUTPENDING +Readline has input pending due to a call to @code{rl_execute_next()}. +@item RL_STATE_TTYCSAVED +Readline has saved the values of the terminal's special characters. +@item RL_STATE_CALLBACK +Readline is currently using the alternate (callback) interface +(@pxref{Alternate Interface}). +@item RL_STATE_VIMOTION +Readline is reading the argument to a vi-mode "motion" command. +@item RL_STATE_MULTIKEY +Readline is reading a multiple-keystroke command. +@item RL_STATE_VICMDONCE +Readline has entered vi command (movement) mode at least one time during +the current call to @code{readline()}. +@item RL_STATE_DONE +Readline has read a key sequence bound to @code{accept-line} +and is about to return the line to the caller. +@end table + +@end deftypevar + +@deftypevar {int} rl_explicit_arg +Set to a non-zero value if an explicit numeric argument was specified by +the user. Only valid in a bindable command function. +@end deftypevar + +@deftypevar {int} rl_numeric_arg +Set to the value of any numeric argument explicitly specified by the user +before executing the current Readline function. Only valid in a bindable +command function. +@end deftypevar + +@deftypevar {int} rl_editing_mode +Set to a value denoting Readline's current editing mode. A value of +@var{1} means Readline is currently in emacs mode; @var{0} +means that vi mode is active. +@end deftypevar + + +@node Readline Convenience Functions +@section Readline Convenience Functions + +@menu +* Function Naming:: How to give a function you write a name. +* Keymaps:: Making keymaps. +* Binding Keys:: Changing Keymaps. +* Associating Function Names and Bindings:: Translate function names to + key sequences. +* Allowing Undoing:: How to make your functions undoable. +* Redisplay:: Functions to control line display. +* Modifying Text:: Functions to modify @code{rl_line_buffer}. +* Character Input:: Functions to read keyboard input. +* Terminal Management:: Functions to manage terminal settings. +* Utility Functions:: Generally useful functions and hooks. +* Miscellaneous Functions:: Functions that don't fall into any category. +* Alternate Interface:: Using Readline in a `callback' fashion. +* A Readline Example:: An example Readline function. +* Alternate Interface Example:: An example program using the alternate interface. +@end menu + +@node Function Naming +@subsection Naming a Function + +The user can dynamically change the bindings of keys while using +Readline. This is done by representing the function with a descriptive +name. The user is able to type the descriptive name when referring to +the function. Thus, in an init file, one might find + +@example +Meta-Rubout: backward-kill-word +@end example + +This binds the keystroke @key{Meta-Rubout} to the function +@emph{descriptively} named @code{backward-kill-word}. You, as the +programmer, should bind the functions you write to descriptive names as +well. Readline provides a function for doing that: + +@deftypefun int rl_add_defun (const char *name, rl_command_func_t *function, int key) +Add @var{name} to the list of named functions. Make @var{function} be +the function that gets called. If @var{key} is not -1, then bind it to +@var{function} using @code{rl_bind_key()}. +@end deftypefun + +Using this function alone is sufficient for most applications. +It is the recommended way to add a few functions to the default +functions that Readline has built in. +If you need to do something other than adding a function to Readline, +you may need to use the underlying functions described below. + +@node Keymaps +@subsection Selecting a Keymap + +Key bindings take place on a @dfn{keymap}. The keymap is the +association between the keys that the user types and the functions that +get run. You can make your own keymaps, copy existing keymaps, and tell +Readline which keymap to use. + +@deftypefun Keymap rl_make_bare_keymap (void) +Returns a new, empty keymap. The space for the keymap is allocated with +@code{malloc()}; the caller should free it by calling +@code{rl_free_keymap()} when done. +@end deftypefun + +@deftypefun Keymap rl_copy_keymap (Keymap map) +Return a new keymap which is a copy of @var{map}. +@end deftypefun + +@deftypefun Keymap rl_make_keymap (void) +Return a new keymap with the printing characters bound to rl_insert, +the lowercase Meta characters bound to run their equivalents, and +the Meta digits bound to produce numeric arguments. +@end deftypefun + +@deftypefun void rl_discard_keymap (Keymap keymap) +Free the storage associated with the data in @var{keymap}. +The caller should free @var{keymap}. +@end deftypefun + +@deftypefun void rl_free_keymap (Keymap keymap) +Free all storage associated with @var{keymap}. This calls +@code{rl_discard_keymap} to free subordindate keymaps and macros. +@end deftypefun + +@deftypefun int rl_empty_keymap (Keymap keymap) +Return non-zero if there are no keys bound to functions in @var{keymap}; +zero if there are any keys bound. +@end deftypefun + +Readline has several internal keymaps. These functions allow you to +change which keymap is active. + +@deftypefun Keymap rl_get_keymap (void) +Returns the currently active keymap. +@end deftypefun + +@deftypefun void rl_set_keymap (Keymap keymap) +Makes @var{keymap} the currently active keymap. +@end deftypefun + +@deftypefun Keymap rl_get_keymap_by_name (const char *name) +Return the keymap matching @var{name}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@deftypefun {char *} rl_get_keymap_name (Keymap keymap) +Return the name matching @var{keymap}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@deftypefun int rl_set_keymap_name (const char *name, Keymap keymap) +Set the name of @var{keymap}. This name will then be "registered" and +available for use in a @code{set keymap} inputrc directive +@pxref{Readline Init File}). +The @var{name} may not be one of Readline's builtin keymap names; +you may not add a different name for one of Readline's builtin keymaps. +You may replace the name associated with a given keymap by calling this +function more than once with the same @var{keymap} argument. +You may associate a registered @var{name} with a new keymap by calling this +function more than once with the same @var{name} argument. +There is no way to remove a named keymap once the name has been +registered. +Readline will make a copy of @var{name}. +The return value is greater than zero unless @var{name} is one of +Readline's builtin keymap names or @var{keymap} is one of Readline's +builtin keymaps. +@end deftypefun + +@node Binding Keys +@subsection Binding Keys + +Key sequences are associate with functions through the keymap. +Readline has several internal keymaps: @code{emacs_standard_keymap}, +@code{emacs_meta_keymap}, @code{emacs_ctlx_keymap}, +@code{vi_movement_keymap}, and @code{vi_insertion_keymap}. +@code{emacs_standard_keymap} is the default, and the examples in +this manual assume that. + +Since @code{readline()} installs a set of default key bindings the first +time it is called, there is always the danger that a custom binding +installed before the first call to @code{readline()} will be overridden. +An alternate mechanism is to install custom key bindings in an +initialization function assigned to the @code{rl_startup_hook} variable +(@pxref{Readline Variables}). + +These functions manage key bindings. + +@deftypefun int rl_bind_key (int key, rl_command_func_t *function) +Binds @var{key} to @var{function} in the currently active keymap. +Returns non-zero in the case of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map) +Bind @var{key} to @var{function} in @var{map}. +Returns non-zero in the case of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_bind_key_if_unbound (int key, rl_command_func_t *function) +Binds @var{key} to @var{function} if it is not already bound in the +currently active keymap. +Returns non-zero in the case of an invalid @var{key} or if @var{key} is +already bound. +@end deftypefun + +@deftypefun int rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *function, Keymap map) +Binds @var{key} to @var{function} if it is not already bound in @var{map}. +Returns non-zero in the case of an invalid @var{key} or if @var{key} is +already bound. +@end deftypefun + +@deftypefun int rl_unbind_key (int key) +Bind @var{key} to the null function in the currently active keymap. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_key_in_map (int key, Keymap map) +Bind @var{key} to the null function in @var{map}. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_function_in_map (rl_command_func_t *function, Keymap map) +Unbind all keys that execute @var{function} in @var{map}. +@end deftypefun + +@deftypefun int rl_unbind_command_in_map (const char *command, Keymap map) +Unbind all keys that are bound to @var{command} in @var{map}. +@end deftypefun + +@deftypefun int rl_bind_keyseq (const char *keyseq, rl_command_func_t *function) +Bind the key sequence represented by the string @var{keyseq} to the function +@var{function}, beginning in the current keymap. +This makes new keymaps as necessary. +The return value is non-zero if @var{keyseq} is invalid. +@end deftypefun + +@deftypefun int rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) +Bind the key sequence represented by the string @var{keyseq} to the function +@var{function}. This makes new keymaps as necessary. +Initial bindings are performed in @var{map}. +The return value is non-zero if @var{keyseq} is invalid. +@end deftypefun + +@deftypefun int rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map) +Equivalent to @code{rl_bind_keyseq_in_map}. +@end deftypefun + +@deftypefun int rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *function) +Binds @var{keyseq} to @var{function} if it is not already bound in the +currently active keymap. +Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is +already bound. +@end deftypefun + +@deftypefun int rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) +Binds @var{keyseq} to @var{function} if it is not already bound in @var{map}. +Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is +already bound. +@end deftypefun + +@deftypefun int rl_generic_bind (int type, const char *keyseq, char *data, Keymap map) +Bind the key sequence represented by the string @var{keyseq} to the arbitrary +pointer @var{data}. @var{type} says what kind of data is pointed to by +@var{data}; this can be a function (@code{ISFUNC}), a macro +(@code{ISMACR}), or a keymap (@code{ISKMAP}). This makes new keymaps as +necessary. The initial keymap in which to do bindings is @var{map}. +@end deftypefun + +@deftypefun int rl_parse_and_bind (char *line) +Parse @var{line} as if it had been read from the @code{inputrc} file and +perform any key bindings and variable assignments found +(@pxref{Readline Init File}). +@end deftypefun + +@deftypefun int rl_read_init_file (const char *filename) +Read keybindings and variable assignments from @var{filename} +(@pxref{Readline Init File}). +@end deftypefun + +@node Associating Function Names and Bindings +@subsection Associating Function Names and Bindings + +These functions allow you to find out what keys invoke named functions +and the functions invoked by a particular key sequence. You may also +associate a new function name with an arbitrary function. + +@deftypefun {rl_command_func_t *} rl_named_function (const char *name) +Return the function with name @var{name}. +@end deftypefun + +@deftypefun {rl_command_func_t *} rl_function_of_keyseq (const char *keyseq, Keymap map, int *type) +Return the function invoked by @var{keyseq} in keymap @var{map}. +If @var{map} is @code{NULL}, the current keymap is used. If @var{type} is +not @code{NULL}, the type of the object is returned in the @code{int} variable +it points to (one of @code{ISFUNC}, @code{ISKMAP}, or @code{ISMACR}). +It takes a "translated" key sequence and should not be used if the key sequence +can include NUL. +@end deftypefun + +@deftypefun {rl_command_func_t *} rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) +Return the function invoked by @var{keyseq} of length @var{len} +in keymap @var{map}. Equivalent to @code{rl_function_of_keyseq} with the +addition of the @var{len} parameter. +It takes a "translated" key sequence and should be used if the key sequence +can include NUL. +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs (rl_command_func_t *function) +Return an array of strings representing the key sequences used to +invoke @var{function} in the current keymap. +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map) +Return an array of strings representing the key sequences used to +invoke @var{function} in the keymap @var{map}. +@end deftypefun + +@deftypefun void rl_function_dumper (int readable) +Print the readline function names and the key sequences currently +bound to them to @code{rl_outstream}. If @var{readable} is non-zero, +the list is formatted in such a way that it can be made part of an +@code{inputrc} file and re-read. +@end deftypefun + +@deftypefun void rl_list_funmap_names (void) +Print the names of all bindable Readline functions to @code{rl_outstream}. +@end deftypefun + +@deftypefun {const char **} rl_funmap_names (void) +Return a NULL terminated array of known function names. The array is +sorted. The array itself is allocated, but not the strings inside. You +should free the array, but not the pointers, using @code{free} or +@code{rl_free} when you are done. +@end deftypefun + +@deftypefun int rl_add_funmap_entry (const char *name, rl_command_func_t *function) +Add @var{name} to the list of bindable Readline command names, and make +@var{function} the function to be called when @var{name} is invoked. +@end deftypefun + +@node Allowing Undoing +@subsection Allowing Undoing + +Supporting the undo command is a painless thing, and makes your +functions much more useful. It is certainly easy to try +something if you know you can undo it. + +If your function simply inserts text once, or deletes text once, and +uses @code{rl_insert_text()} or @code{rl_delete_text()} to do it, then +undoing is already done for you automatically. + +If you do multiple insertions or multiple deletions, or any combination +of these operations, you should group them together into one operation. +This is done with @code{rl_begin_undo_group()} and +@code{rl_end_undo_group()}. + +The types of events that can be undone are: + +@smallexample +enum undo_code @{ UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END @}; +@end smallexample + +Notice that @code{UNDO_DELETE} means to insert some text, and +@code{UNDO_INSERT} means to delete some text. That is, the undo code +tells what to undo, not how to undo it. @code{UNDO_BEGIN} and +@code{UNDO_END} are tags added by @code{rl_begin_undo_group()} and +@code{rl_end_undo_group()}. + +@deftypefun int rl_begin_undo_group (void) +Begins saving undo information in a group construct. The undo +information usually comes from calls to @code{rl_insert_text()} and +@code{rl_delete_text()}, but could be the result of calls to +@code{rl_add_undo()}. +@end deftypefun + +@deftypefun int rl_end_undo_group (void) +Closes the current undo group started with @code{rl_begin_undo_group +()}. There should be one call to @code{rl_end_undo_group()} +for each call to @code{rl_begin_undo_group()}. +@end deftypefun + +@deftypefun void rl_add_undo (enum undo_code what, int start, int end, char *text) +Remember how to undo an event (according to @var{what}). The affected +text runs from @var{start} to @var{end}, and encompasses @var{text}. +@end deftypefun + +@deftypefun void rl_free_undo_list (void) +Free the existing undo list. +@end deftypefun + +@deftypefun int rl_do_undo (void) +Undo the first thing on the undo list. Returns @code{0} if there was +nothing to undo, non-zero if something was undone. +@end deftypefun + +Finally, if you neither insert nor delete text, but directly modify the +existing text (e.g., change its case), call @code{rl_modifying()} +once, just before you modify the text. You must supply the indices of +the text range that you are going to modify. + +@deftypefun int rl_modifying (int start, int end) +Tell Readline to save the text between @var{start} and @var{end} as a +single undo unit. It is assumed that you will subsequently modify +that text. +@end deftypefun + +@node Redisplay +@subsection Redisplay + +@deftypefun void rl_redisplay (void) +Change what's displayed on the screen to reflect the current contents +of @code{rl_line_buffer}. +@end deftypefun + +@deftypefun int rl_forced_update_display (void) +Force the line to be updated and redisplayed, whether or not +Readline thinks the screen display is correct. +@end deftypefun + +@deftypefun int rl_on_new_line (void) +Tell the update functions that we have moved onto a new (empty) line, +usually after outputting a newline. +@end deftypefun + +@deftypefun int rl_on_new_line_with_prompt (void) +Tell the update functions that we have moved onto a new line, with +@var{rl_prompt} already displayed. +This could be used by applications that want to output the prompt string +themselves, but still need Readline to know the prompt string length for +redisplay. +It should be used after setting @var{rl_already_prompted}. +@end deftypefun + +@deftypefun int rl_clear_visible_line (void) +Clear the screen lines corresponding to the current line's contents. +@end deftypefun + +@deftypefun int rl_reset_line_state (void) +Reset the display state to a clean state and redisplay the current line +starting on a new line. +@end deftypefun + +@deftypefun int rl_crlf (void) +Move the cursor to the start of the next screen line. +@end deftypefun + +@deftypefun int rl_show_char (int c) +Display character @var{c} on @code{rl_outstream}. +If Readline has not been set to display meta characters directly, this +will convert meta characters to a meta-prefixed key sequence. +This is intended for use by applications which wish to do their own +redisplay. +@end deftypefun + +@deftypefun int rl_message (const char *, @dots{}) +The arguments are a format string as would be supplied to @code{printf}, +possibly containing conversion specifications such as @samp{%d}, and +any additional arguments necessary to satisfy the conversion specifications. +The resulting string is displayed in the @dfn{echo area}. The echo area +is also used to display numeric arguments and search strings. +You should call @code{rl_save_prompt} to save the prompt information +before calling this function. +@end deftypefun + +@deftypefun int rl_clear_message (void) +Clear the message in the echo area. If the prompt was saved with a call to +@code{rl_save_prompt} before the last call to @code{rl_message}, +call @code{rl_restore_prompt} before calling this function. +@end deftypefun + +@deftypefun void rl_save_prompt (void) +Save the local Readline prompt display state in preparation for +displaying a new message in the message area with @code{rl_message()}. +@end deftypefun + +@deftypefun void rl_restore_prompt (void) +Restore the local Readline prompt display state saved by the most +recent call to @code{rl_save_prompt}. +if @code{rl_save_prompt} was called to save the prompt before a call +to @code{rl_message}, this function should be called before the +corresponding call to @code{rl_clear_message}. +@end deftypefun + +@deftypefun int rl_expand_prompt (char *prompt) +Expand any special character sequences in @var{prompt} and set up the +local Readline prompt redisplay variables. +This function is called by @code{readline()}. It may also be called to +expand the primary prompt if the @code{rl_on_new_line_with_prompt()} +function or @code{rl_already_prompted} variable is used. +It returns the number of visible characters on the last line of the +(possibly multi-line) prompt. +Applications may indicate that the prompt contains characters that take +up no physical screen space when displayed by bracketing a sequence of +such characters with the special markers @code{RL_PROMPT_START_IGNORE} +and @code{RL_PROMPT_END_IGNORE} (declared in @file{readline.h}). This may +be used to embed terminal-specific escape sequences in prompts. +@end deftypefun + +@deftypefun int rl_set_prompt (const char *prompt) +Make Readline use @var{prompt} for subsequent redisplay. This calls +@code{rl_expand_prompt()} to expand the prompt and sets @code{rl_prompt} +to the result. +@end deftypefun + +@node Modifying Text +@subsection Modifying Text + +@deftypefun int rl_insert_text (const char *text) +Insert @var{text} into the line at the current cursor position. +Returns the number of characters inserted. +@end deftypefun + +@deftypefun int rl_delete_text (int start, int end) +Delete the text between @var{start} and @var{end} in the current line. +Returns the number of characters deleted. +@end deftypefun + +@deftypefun {char *} rl_copy_text (int start, int end) +Return a copy of the text between @var{start} and @var{end} in +the current line. +@end deftypefun + +@deftypefun int rl_kill_text (int start, int end) +Copy the text between @var{start} and @var{end} in the current line +to the kill ring, appending or prepending to the last kill if the +last command was a kill command. The text is deleted. +If @var{start} is less than @var{end}, +the text is appended, otherwise prepended. If the last command was +not a kill, a new kill ring slot is used. +@end deftypefun + +@deftypefun int rl_push_macro_input (char *macro) +Cause @var{macro} to be inserted into the line, as if it had been invoked +by a key bound to a macro. Not especially useful; use +@code{rl_insert_text()} instead. +@end deftypefun + +@node Character Input +@subsection Character Input + +@deftypefun int rl_read_key (void) +Return the next character available from Readline's current input stream. +This handles input inserted into +the input stream via @var{rl_pending_input} (@pxref{Readline Variables}) +and @code{rl_stuff_char()}, macros, and characters read from the keyboard. +While waiting for input, this function will call any function assigned to +the @code{rl_event_hook} variable. +@end deftypefun + +@deftypefun int rl_getc (FILE *stream) +Return the next character available from @var{stream}, which is assumed to +be the keyboard. +@end deftypefun + +@deftypefun int rl_stuff_char (int c) +Insert @var{c} into the Readline input stream. It will be "read" +before Readline attempts to read characters from the terminal with +@code{rl_read_key()}. Up to 512 characters may be pushed back. +@code{rl_stuff_char} returns 1 if the character was successfully inserted; +0 otherwise. +@end deftypefun + +@deftypefun int rl_execute_next (int c) +Make @var{c} be the next command to be executed when @code{rl_read_key()} +is called. This sets @var{rl_pending_input}. +@end deftypefun + +@deftypefun int rl_clear_pending_input (void) +Unset @var{rl_pending_input}, effectively negating the effect of any +previous call to @code{rl_execute_next()}. This works only if the +pending input has not already been read with @code{rl_read_key()}. +@end deftypefun + +@deftypefun int rl_set_keyboard_input_timeout (int u) +While waiting for keyboard input in @code{rl_read_key()}, Readline will +wait for @var{u} microseconds for input before calling any function +assigned to @code{rl_event_hook}. @var{u} must be greater than or equal +to zero (a zero-length timeout is equivalent to a poll). +The default waiting period is one-tenth of a second. +Returns the old timeout value. +@end deftypefun + +@node Terminal Management +@subsection Terminal Management + +@deftypefun void rl_prep_terminal (int meta_flag) +Modify the terminal settings for Readline's use, so @code{readline()} +can read a single character at a time from the keyboard. +The @var{meta_flag} argument should be non-zero if Readline should +read eight-bit input. +@end deftypefun + +@deftypefun void rl_deprep_terminal (void) +Undo the effects of @code{rl_prep_terminal()}, leaving the terminal in +the state in which it was before the most recent call to +@code{rl_prep_terminal()}. +@end deftypefun + +@deftypefun void rl_tty_set_default_bindings (Keymap kmap) +Read the operating system's terminal editing characters (as would be +displayed by @code{stty}) to their Readline equivalents. +The bindings are performed in @var{kmap}. +@end deftypefun + +@deftypefun void rl_tty_unset_default_bindings (Keymap kmap) +Reset the bindings manipulated by @code{rl_tty_set_default_bindings} so +that the terminal editing characters are bound to @code{rl_insert}. +The bindings are performed in @var{kmap}. +@end deftypefun + +@deftypefun int rl_tty_set_echoing (int value) +Set Readline's idea of whether or not it is echoing output to its output +stream (@var{rl_outstream}). If @var{value} is 0, Readline does not display +output to @var{rl_outstream}; any other value enables output. The initial +value is set when Readline initializes the terminal settings. +This function returns the previous value. +@end deftypefun + +@deftypefun int rl_reset_terminal (const char *terminal_name) +Reinitialize Readline's idea of the terminal settings using +@var{terminal_name} as the terminal type (e.g., @code{vt100}). +If @var{terminal_name} is @code{NULL}, the value of the @code{TERM} +environment variable is used. +@end deftypefun + +@node Utility Functions +@subsection Utility Functions + +@deftypefun int rl_save_state (struct readline_state *sp) +Save a snapshot of Readline's internal state to @var{sp}. +The contents of the @var{readline_state} structure are documented +in @file{readline.h}. +The caller is responsible for allocating the structure. +@end deftypefun + +@deftypefun int rl_restore_state (struct readline_state *sp) +Restore Readline's internal state to that stored in @var{sp}, which must +have been saved by a call to @code{rl_save_state}. +The contents of the @var{readline_state} structure are documented +in @file{readline.h}. +The caller is responsible for freeing the structure. +@end deftypefun + +@deftypefun void rl_free (void *mem) +Deallocate the memory pointed to by @var{mem}. @var{mem} must have been +allocated by @code{malloc}. +@end deftypefun + +@deftypefun void rl_replace_line (const char *text, int clear_undo) +Replace the contents of @code{rl_line_buffer} with @var{text}. +The point and mark are preserved, if possible. +If @var{clear_undo} is non-zero, the undo list associated with the +current line is cleared. +@end deftypefun + +@deftypefun void rl_extend_line_buffer (int len) +Ensure that @code{rl_line_buffer} has enough space to hold @var{len} +characters, possibly reallocating it if necessary. +@end deftypefun + +@deftypefun int rl_initialize (void) +Initialize or re-initialize Readline's internal state. +It's not strictly necessary to call this; @code{readline()} calls it before +reading any input. +@end deftypefun + +@deftypefun int rl_ding (void) +Ring the terminal bell, obeying the setting of @code{bell-style}. +@end deftypefun + +@deftypefun int rl_alphabetic (int c) +Return 1 if @var{c} is an alphabetic character. +@end deftypefun + +@deftypefun void rl_display_match_list (char **matches, int len, int max) +A convenience function for displaying a list of strings in +columnar format on Readline's output stream. @code{matches} is the list +of strings, in argv format, such as a list of completion matches. +@code{len} is the number of strings in @code{matches}, and @code{max} +is the length of the longest string in @code{matches}. This function uses +the setting of @code{print-completions-horizontally} to select how the +matches are displayed (@pxref{Readline Init File Syntax}). +When displaying completions, this function sets the number of columns used +for display to the value of @code{completion-display-width}, the value of +the environment variable @env{COLUMNS}, or the screen width, in that order. +@end deftypefun + +The following are implemented as macros, defined in @code{chardefs.h}. +Applications should refrain from using them. + +@deftypefun int _rl_uppercase_p (int c) +Return 1 if @var{c} is an uppercase alphabetic character. +@end deftypefun + +@deftypefun int _rl_lowercase_p (int c) +Return 1 if @var{c} is a lowercase alphabetic character. +@end deftypefun + +@deftypefun int _rl_digit_p (int c) +Return 1 if @var{c} is a numeric character. +@end deftypefun + +@deftypefun int _rl_to_upper (int c) +If @var{c} is a lowercase alphabetic character, return the corresponding +uppercase character. +@end deftypefun + +@deftypefun int _rl_to_lower (int c) +If @var{c} is an uppercase alphabetic character, return the corresponding +lowercase character. +@end deftypefun + +@deftypefun int _rl_digit_value (int c) +If @var{c} is a number, return the value it represents. +@end deftypefun + +@node Miscellaneous Functions +@subsection Miscellaneous Functions + +@deftypefun int rl_macro_bind (const char *keyseq, const char *macro, Keymap map) +Bind the key sequence @var{keyseq} to invoke the macro @var{macro}. +The binding is performed in @var{map}. When @var{keyseq} is invoked, the +@var{macro} will be inserted into the line. This function is deprecated; +use @code{rl_generic_bind()} instead. +@end deftypefun + +@deftypefun void rl_macro_dumper (int readable) +Print the key sequences bound to macros and their values, using +the current keymap, to @code{rl_outstream}. +If @var{readable} is non-zero, the list is formatted in such a way +that it can be made part of an @code{inputrc} file and re-read. +@end deftypefun + +@deftypefun int rl_variable_bind (const char *variable, const char *value) +Make the Readline variable @var{variable} have @var{value}. +This behaves as if the readline command +@samp{set @var{variable} @var{value}} had been executed in an @code{inputrc} +file (@pxref{Readline Init File Syntax}). +@end deftypefun + +@deftypefun {char *} rl_variable_value (const char *variable) +Return a string representing the value of the Readline variable @var{variable}. +For boolean variables, this string is either @samp{on} or @samp{off}. +@end deftypefun + +@deftypefun void rl_variable_dumper (int readable) +Print the readline variable names and their current values +to @code{rl_outstream}. +If @var{readable} is non-zero, the list is formatted in such a way +that it can be made part of an @code{inputrc} file and re-read. +@end deftypefun + +@deftypefun int rl_set_paren_blink_timeout (int u) +Set the time interval (in microseconds) that Readline waits when showing +a balancing character when @code{blink-matching-paren} has been enabled. +@end deftypefun + +@deftypefun {char *} rl_get_termcap (const char *cap) +Retrieve the string value of the termcap capability @var{cap}. +Readline fetches the termcap entry for the current terminal name and +uses those capabilities to move around the screen line and perform other +terminal-specific operations, like erasing a line. Readline does not +use all of a terminal's capabilities, and this function will return +values for only those capabilities Readline uses. +@end deftypefun + +@deftypefun {void} rl_clear_history (void) +Clear the history list by deleting all of the entries, in the same manner +as the History library's @code{clear_history()} function. +This differs from @code{clear_history} because it frees private data +Readline saves in the history list. +@end deftypefun + +@node Alternate Interface +@subsection Alternate Interface + +An alternate interface is available to plain @code{readline()}. Some +applications need to interleave keyboard I/O with file, device, or +window system I/O, typically by using a main loop to @code{select()} +on various file descriptors. To accommodate this need, readline can +also be invoked as a `callback' function from an event loop. There +are functions available to make this easy. + +@deftypefun void rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *lhandler) +Set up the terminal for readline I/O and display the initial +expanded value of @var{prompt}. Save the value of @var{lhandler} to +use as a handler function to call when a complete line of input has been +entered. +The handler function receives the text of the line as an argument. +As with @code{readline()}, the handler function should @code{free} the +line when it it finished with it. +@end deftypefun + +@deftypefun void rl_callback_read_char (void) +Whenever an application determines that keyboard input is available, it +should call @code{rl_callback_read_char()}, which will read the next +character from the current input source. +If that character completes the line, @code{rl_callback_read_char} will +invoke the @var{lhandler} function installed by +@code{rl_callback_handler_install} to process the line. +Before calling the @var{lhandler} function, the terminal settings are +reset to the values they had before calling +@code{rl_callback_handler_install}. +If the @var{lhandler} function returns, +and the line handler remains installed, +the terminal settings are modified for Readline's use again. +@code{EOF} is indicated by calling @var{lhandler} with a +@code{NULL} line. +@end deftypefun + +@deftypefun void rl_callback_sigcleanup (void) +Clean up any internal state the callback interface uses to maintain state +between calls to rl_callback_read_char (e.g., the state of any active +incremental searches). This is intended to be used by applications that +wish to perform their own signal handling; Readline's internal signal handler +calls this when appropriate. +@end deftypefun + +@deftypefun void rl_callback_handler_remove (void) +Restore the terminal to its initial state and remove the line handler. +You may call this function from within a callback as well as independently. +If the @var{lhandler} installed by @code{rl_callback_handler_install} +does not exit the program, either this function or the function referred +to by the value of @code{rl_deprep_term_function} should be called before +the program exits to reset the terminal settings. +@end deftypefun + +@node A Readline Example +@subsection A Readline Example + +Here is a function which changes lowercase characters to their uppercase +equivalents, and uppercase characters to lowercase. If +this function was bound to @samp{M-c}, then typing @samp{M-c} would +change the case of the character under point. Typing @samp{M-1 0 M-c} +would change the case of the following 10 characters, leaving the cursor on +the last character changed. + +@example +/* Invert the case of the COUNT following characters. */ +int +invert_case_line (count, key) + int count, key; +@{ + register int start, end, i; + + start = rl_point; + + if (rl_point >= rl_end) + return (0); + + if (count < 0) + @{ + direction = -1; + count = -count; + @} + else + direction = 1; + + /* Find the end of the range to modify. */ + end = start + (count * direction); + + /* Force it to be within range. */ + if (end > rl_end) + end = rl_end; + else if (end < 0) + end = 0; + + if (start == end) + return (0); + + if (start > end) + @{ + int temp = start; + start = end; + end = temp; + @} + + /* Tell readline that we are modifying the line, + so it will save the undo information. */ + rl_modifying (start, end); + + for (i = start; i != end; i++) + @{ + if (_rl_uppercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = _rl_to_lower (rl_line_buffer[i]); + else if (_rl_lowercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = _rl_to_upper (rl_line_buffer[i]); + @} + /* Move point to on top of the last character changed. */ + rl_point = (direction == 1) ? end - 1 : start; + return (0); +@} +@end example + +@node Alternate Interface Example +@subsection Alternate Interface Example + +Here is a complete program that illustrates Readline's alternate interface. +It reads lines from the terminal and displays them, providing the +standard history and TAB completion functions. +It understands the EOF character or "exit" to exit the program. + +@example +/* Standard include files. stdio.h is required. */ +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <locale.h> + +/* Used for select(2) */ +#include <sys/types.h> +#include <sys/select.h> + +#include <signal.h> + +#include <stdio.h> + +/* Standard readline include files. */ +#include <readline/readline.h> +#include <readline/history.h> + +static void cb_linehandler (char *); +static void sighandler (int); + +int running; +int sigwinch_received; +const char *prompt = "rltest$ "; + +/* Handle SIGWINCH and window size changes when readline is not active and + reading a character. */ +static void +sighandler (int sig) +@{ + sigwinch_received = 1; +@} + +/* Callback function called for each line when accept-line executed, EOF + seen, or EOF character read. This sets a flag and returns; it could + also call exit(3). */ +static void +cb_linehandler (char *line) +@{ + /* Can use ^D (stty eof) or `exit' to exit. */ + if (line == NULL || strcmp (line, "exit") == 0) + @{ + if (line == 0) + printf ("\n"); + printf ("exit\n"); + /* This function needs to be called to reset the terminal settings, + and calling it from the line handler keeps one extra prompt from + being displayed. */ + rl_callback_handler_remove (); + + running = 0; + @} + else + @{ + if (*line) + add_history (line); + printf ("input line: %s\n", line); + free (line); + @} +@} + +int +main (int c, char **v) +@{ + fd_set fds; + int r; + + /* Set the default locale values according to environment variables. */ + setlocale (LC_ALL, ""); + + /* Handle window size changes when readline is not active and reading + characters. */ + signal (SIGWINCH, sighandler); + + /* Install the line handler. */ + rl_callback_handler_install (prompt, cb_linehandler); + + /* Enter a simple event loop. This waits until something is available + to read on readline's input stream (defaults to standard input) and + calls the builtin character read callback to read it. It does not + have to modify the user's terminal settings. */ + running = 1; + while (running) + @{ + FD_ZERO (&fds); + FD_SET (fileno (rl_instream), &fds); + + r = select (FD_SETSIZE, &fds, NULL, NULL, NULL); + if (r < 0 && errno != EINTR) + @{ + perror ("rltest: select"); + rl_callback_handler_remove (); + break; + @} + if (sigwinch_received) + @{ + rl_resize_terminal (); + sigwinch_received = 0; + @} + if (r < 0) + continue; + + if (FD_ISSET (fileno (rl_instream), &fds)) + rl_callback_read_char (); + @} + + printf ("rltest: Event loop has exited\n"); + return 0; +@} +@end example + +@node Readline Signal Handling +@section Readline Signal Handling + +Signals are asynchronous events sent to a process by the Unix kernel, +sometimes on behalf of another process. They are intended to indicate +exceptional events, like a user pressing the interrupt key on his terminal, +or a network connection being broken. There is a class of signals that can +be sent to the process currently reading input from the keyboard. Since +Readline changes the terminal attributes when it is called, it needs to +perform special processing when such a signal is received in order to +restore the terminal to a sane state, or provide application writers with +functions to do so manually. + +Readline contains an internal signal handler that is installed for a +number of signals (@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, +@code{SIGHUP}, +@code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}). +When one of these signals is received, the signal handler +will reset the terminal attributes to those that were in effect before +@code{readline()} was called, reset the signal handling to what it was +before @code{readline()} was called, and resend the signal to the calling +application. +If and when the calling application's signal handler returns, Readline +will reinitialize the terminal and continue to accept input. +When a @code{SIGINT} is received, the Readline signal handler performs +some additional work, which will cause any partially-entered line to be +aborted (see the description of @code{rl_free_line_state()} below). + +There is an additional Readline signal handler, for @code{SIGWINCH}, which +the kernel sends to a process whenever the terminal's size changes (for +example, if a user resizes an @code{xterm}). The Readline @code{SIGWINCH} +handler updates Readline's internal screen size information, and then calls +any @code{SIGWINCH} signal handler the calling application has installed. +Readline calls the application's @code{SIGWINCH} signal handler without +resetting the terminal to its original state. If the application's signal +handler does more than update its idea of the terminal size and return (for +example, a @code{longjmp} back to a main processing loop), it @emph{must} +call @code{rl_cleanup_after_signal()} (described below), to restore the +terminal state. + +When an application is using the callback interface +(@pxref{Alternate Interface}), Readline installs signal handlers only for +the duration of the call to @code{rl_callback_read_char}. Applications +using the callback interface should be prepared to clean up Readline's +state if they wish to handle the signal before the line handler completes +and restores the terminal state. + +If an application using the callback interface wishes to have Readline +install its signal handlers at the time the application calls +@code{rl_callback_handler_install} and remove them only when a complete +line of input has been read, it should set the +@code{rl_persistent_signal_handlers} variable to a non-zero value. +This allows an application to defer all of the handling of the signals +Readline catches to Readline. +Applications should use this variable with care; it can result in Readline +catching signals and not acting on them (or allowing the application to react +to them) until the application calls @code{rl_callback_read_char}. This +can result in an application becoming less responsive to keyboard signals +like SIGINT. +If an application does not want or need to perform any signal handling, or +does not need to do any processing between calls to @code{rl_callback_read_char}, +setting this variable may be desirable. + +Readline provides two variables that allow application writers to +control whether or not it will catch certain signals and act on them +when they are received. It is important that applications change the +values of these variables only when calling @code{readline()}, not in +a signal handler, so Readline's internal signal state is not corrupted. + +@deftypevar int rl_catch_signals +If this variable is non-zero, Readline will install signal handlers for +@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, +@code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}. + +The default value of @code{rl_catch_signals} is 1. +@end deftypevar + +@deftypevar int rl_catch_sigwinch +If this variable is set to a non-zero value, +Readline will install a signal handler for @code{SIGWINCH}. + +The default value of @code{rl_catch_sigwinch} is 1. +@end deftypevar + +@deftypevar int rl_persistent_signal_handlers +If an application using the callback interface wishes Readline's signal +handlers to be installed and active during the set of calls to +@code{rl_callback_read_char} that constitutes an entire single line, +it should set this variable to a non-zero value. + +The default value of @code{rl_persistent_signal_handlers} is 0. +@end deftypevar + +@deftypevar int rl_change_environment +If this variable is set to a non-zero value, +and Readline is handling @code{SIGWINCH}, Readline will modify the +@var{LINES} and @var{COLUMNS} environment variables upon receipt of a +@code{SIGWINCH} + +The default value of @code{rl_change_environment} is 1. +@end deftypevar + +If an application does not wish to have Readline catch any signals, or +to handle signals other than those Readline catches (@code{SIGHUP}, +for example), +Readline provides convenience functions to do the necessary terminal +and internal state cleanup upon receipt of a signal. + +@deftypefun int rl_pending_signal (void) +Return the signal number of the most recent signal Readline received but +has not yet handled, or 0 if there is no pending signal. +@end deftypefun + +@deftypefun void rl_cleanup_after_signal (void) +This function will reset the state of the terminal to what it was before +@code{readline()} was called, and remove the Readline signal handlers for +all signals, depending on the values of @code{rl_catch_signals} and +@code{rl_catch_sigwinch}. +@end deftypefun + +@deftypefun void rl_free_line_state (void) +This will free any partial state associated with the current input line +(undo information, any partial history entry, any partially-entered +keyboard macro, and any partially-entered numeric argument). This +should be called before @code{rl_cleanup_after_signal()}. The +Readline signal handler for @code{SIGINT} calls this to abort the +current input line. +@end deftypefun + +@deftypefun void rl_reset_after_signal (void) +This will reinitialize the terminal and reinstall any Readline signal +handlers, depending on the values of @code{rl_catch_signals} and +@code{rl_catch_sigwinch}. +@end deftypefun + +If an application wants to force Readline to handle any signals that +have arrived while it has been executing, @code{rl_check_signals()} +will call Readline's internal signal handler if there are any pending +signals. This is primarily intended for those applications that use +a custom @code{rl_getc_function} (@pxref{Readline Variables}) and wish +to handle signals received while waiting for input. + +@deftypefun void rl_check_signals (void) +If there are any pending signals, call Readline's internal signal handling +functions to process them. @code{rl_pending_signal()} can be used independently +to determine whether or not there are any pending signals. +@end deftypefun + +If an application does not wish Readline to catch @code{SIGWINCH}, it may +call @code{rl_resize_terminal()} or @code{rl_set_screen_size()} to force +Readline to update its idea of the terminal size when a @code{SIGWINCH} +is received. + +@deftypefun void rl_echo_signal_char (int sig) +If an application wishes to install its own signal handlers, but still +have readline display characters that generate signals, calling this +function with @var{sig} set to @code{SIGINT}, @code{SIGQUIT}, or +@code{SIGTSTP} will display the character generating that signal. +@end deftypefun + +@deftypefun void rl_resize_terminal (void) +Update Readline's internal screen size by reading values from the kernel. +@end deftypefun + +@deftypefun void rl_set_screen_size (int rows, int cols) +Set Readline's idea of the terminal size to @var{rows} rows and +@var{cols} columns. If either @var{rows} or @var{columns} is less than +or equal to 0, Readline's idea of that terminal dimension is unchanged. +@end deftypefun + +If an application does not want to install a @code{SIGWINCH} handler, but +is still interested in the screen dimensions, Readline's idea of the screen +size may be queried. + +@deftypefun void rl_get_screen_size (int *rows, int *cols) +Return Readline's idea of the terminal's size in the +variables pointed to by the arguments. +@end deftypefun + +@deftypefun void rl_reset_screen_size (void) +Cause Readline to reobtain the screen size and recalculate its dimensions. +@end deftypefun + +The following functions install and remove Readline's signal handlers. + +@deftypefun int rl_set_signals (void) +Install Readline's signal handler for @code{SIGINT}, @code{SIGQUIT}, +@code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, +@code{SIGTTOU}, and @code{SIGWINCH}, depending on the values of +@code{rl_catch_signals} and @code{rl_catch_sigwinch}. +@end deftypefun + +@deftypefun int rl_clear_signals (void) +Remove all of the Readline signal handlers installed by +@code{rl_set_signals()}. +@end deftypefun + +@node Custom Completers +@section Custom Completers +@cindex application-specific completion functions + +Typically, a program that reads commands from the user has a way of +disambiguating commands and data. If your program is one of these, then +it can provide completion for commands, data, or both. +The following sections describe how your program and Readline +cooperate to provide this service. + +@menu +* How Completing Works:: The logic used to do completion. +* Completion Functions:: Functions provided by Readline. +* Completion Variables:: Variables which control completion. +* A Short Completion Example:: An example of writing completer subroutines. +@end menu + +@node How Completing Works +@subsection How Completing Works + +In order to complete some text, the full list of possible completions +must be available. That is, it is not possible to accurately +expand a partial word without knowing all of the possible words +which make sense in that context. The Readline library provides +the user interface to completion, and two of the most common +completion functions: filename and username. For completing other types +of text, you must write your own completion function. This section +describes exactly what such functions must do, and provides an example. + +There are three major functions used to perform completion: + +@enumerate +@item +The user-interface function @code{rl_complete()}. This function is +called with the same arguments as other bindable Readline functions: +@var{count} and @var{invoking_key}. +It isolates the word to be completed and calls +@code{rl_completion_matches()} to generate a list of possible completions. +It then either lists the possible completions, inserts the possible +completions, or actually performs the +completion, depending on which behavior is desired. + +@item +The internal function @code{rl_completion_matches()} uses an +application-supplied @dfn{generator} function to generate the list of +possible matches, and then returns the array of these matches. +The caller should place the address of its generator function in +@code{rl_completion_entry_function}. + +@item +The generator function is called repeatedly from +@code{rl_completion_matches()}, returning a string each time. The +arguments to the generator function are @var{text} and @var{state}. +@var{text} is the partial word to be completed. @var{state} is zero the +first time the function is called, allowing the generator to perform +any necessary initialization, and a positive non-zero integer for +each subsequent call. The generator function returns +@code{(char *)NULL} to inform @code{rl_completion_matches()} that there are +no more possibilities left. Usually the generator function computes the +list of possible completions when @var{state} is zero, and returns them +one at a time on subsequent calls. Each string the generator function +returns as a match must be allocated with @code{malloc()}; Readline +frees the strings when it has finished with them. +Such a generator function is referred to as an +@dfn{application-specific completion function}. + +@end enumerate + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{rl_completion_matches()}). The default is to do filename completion. +@end deftypefun + +@deftypevar {rl_compentry_func_t *} rl_completion_entry_function +This is a pointer to the generator function for +@code{rl_completion_matches()}. +If the value of @code{rl_completion_entry_function} is +@code{NULL} then the default filename generator +function, @code{rl_filename_completion_function()}, is used. +An @dfn{application-specific completion function} is a function whose +address is assigned to @code{rl_completion_entry_function} and whose +return values are used to generate possible completions. +@end deftypevar + +@node Completion Functions +@subsection Completion Functions + +Here is the complete list of callable completion functions present in +Readline. + +@deftypefun int rl_complete_internal (int what_to_do) +Complete the word at or before point. @var{what_to_do} says what to do +with the completion. A value of @samp{?} means list the possible +completions. @samp{TAB} means do standard completion. @samp{*} means +insert all of the possible completions. @samp{!} means to display +all of the possible completions, if there is more than one, as well as +performing partial completion. @samp{@@} is similar to @samp{!}, but +possible completions are not listed if the possible completions share +a common prefix. +@end deftypefun + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{rl_completion_matches()} and @code{rl_completion_entry_function}). +The default is to do filename +completion. This calls @code{rl_complete_internal()} with an +argument depending on @var{invoking_key}. +@end deftypefun + +@deftypefun int rl_possible_completions (int count, int invoking_key) +List the possible completions. See description of @code{rl_complete +()}. This calls @code{rl_complete_internal()} with an argument of +@samp{?}. +@end deftypefun + +@deftypefun int rl_insert_completions (int count, int invoking_key) +Insert the list of possible completions into the line, deleting the +partially-completed word. See description of @code{rl_complete()}. +This calls @code{rl_complete_internal()} with an argument of @samp{*}. +@end deftypefun + +@deftypefun int rl_completion_mode (rl_command_func_t *cfunc) +Returns the appropriate value to pass to @code{rl_complete_internal()} +depending on whether @var{cfunc} was called twice in succession and +the values of the @code{show-all-if-ambiguous} and +@code{show-all-if-unmodified} variables. +Application-specific completion functions may use this function to present +the same interface as @code{rl_complete()}. +@end deftypefun + +@deftypefun {char **} rl_completion_matches (const char *text, rl_compentry_func_t *entry_func) +Returns an array of strings which is a list of completions for +@var{text}. If there are no completions, returns @code{NULL}. +The first entry in the returned array is the substitution for @var{text}. +The remaining entries are the possible completions. The array is +terminated with a @code{NULL} pointer. + +@var{entry_func} is a function of two args, and returns a +@code{char *}. The first argument is @var{text}. The second is a +state argument; it is zero on the first call, and non-zero on subsequent +calls. @var{entry_func} returns a @code{NULL} pointer to the caller +when there are no more matches. +@end deftypefun + +@deftypefun {char *} rl_filename_completion_function (const char *text, int state) +A generator function for filename completion in the general case. +@var{text} is a partial filename. +The Bash source is a useful reference for writing application-specific +completion functions (the Bash completion functions call this and other +Readline functions). +@end deftypefun + +@deftypefun {char *} rl_username_completion_function (const char *text, int state) +A completion generator for usernames. @var{text} contains a partial +username preceded by a random character (usually @samp{~}). As with all +completion generators, @var{state} is zero on the first call and non-zero +for subsequent calls. +@end deftypefun + +@node Completion Variables +@subsection Completion Variables + +@deftypevar {rl_compentry_func_t *} rl_completion_entry_function +A pointer to the generator function for @code{rl_completion_matches()}. +@code{NULL} means to use @code{rl_filename_completion_function()}, +the default filename completer. +@end deftypevar + +@deftypevar {rl_completion_func_t *} rl_attempted_completion_function +A pointer to an alternative function to create matches. +The function is called with @var{text}, @var{start}, and @var{end}. +@var{start} and @var{end} are indices in @code{rl_line_buffer} defining +the boundaries of @var{text}, which is a character string. +If this function exists and returns @code{NULL}, or if this variable is +set to @code{NULL}, then @code{rl_complete()} will call the value of +@code{rl_completion_entry_function} to generate matches, otherwise the +array of strings returned will be used. +If this function sets the @code{rl_attempted_completion_over} +variable to a non-zero value, Readline will not perform its default +completion even if this function returns no matches. +@end deftypevar + +@deftypevar {rl_quote_func_t *} rl_filename_quoting_function +A pointer to a function that will quote a filename in an +application-specific fashion. This is called if filename completion is being +attempted and one of the characters in @code{rl_filename_quote_characters} +appears in a completed filename. The function is called with +@var{text}, @var{match_type}, and @var{quote_pointer}. The @var{text} +is the filename to be quoted. The @var{match_type} is either +@code{SINGLE_MATCH}, if there is only one completion match, or +@code{MULT_MATCH}. Some functions use this to decide whether or not to +insert a closing quote character. The @var{quote_pointer} is a pointer +to any opening quote character the user typed. Some functions choose +to reset this character. +@end deftypevar + +@deftypevar {rl_dequote_func_t *} rl_filename_dequoting_function +A pointer to a function that will remove application-specific quoting +characters from a filename before completion is attempted, so those +characters do not interfere with matching the text against names in +the filesystem. It is called with @var{text}, the text of the word +to be dequoted, and @var{quote_char}, which is the quoting character +that delimits the filename (usually @samp{'} or @samp{"}). If +@var{quote_char} is zero, the filename was not in an embedded string. +@end deftypevar + +@deftypevar {rl_linebuf_func_t *} rl_char_is_quoted_p +A pointer to a function to call that determines whether or not a specific +character in the line buffer is quoted, according to whatever quoting +mechanism the program calling Readline uses. The function is called with +two arguments: @var{text}, the text of the line, and @var{index}, the +index of the character in the line. It is used to decide whether a +character found in @code{rl_completer_word_break_characters} should be +used to break words for the completer. +@end deftypevar + +@deftypevar {rl_compignore_func_t *} rl_ignore_some_completions_function +This function, if defined, is called by the completer when real filename +completion is done, after all the matching names have been generated. +It is passed a @code{NULL} terminated array of matches. +The first element (@code{matches[0]}) is the +maximal substring common to all matches. This function can +re-arrange the list of matches as required, but each element deleted +from the array must be freed. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_directory_completion_hook +This function, if defined, is allowed to modify the directory portion +of filenames Readline completes. +It could be used to expand symbolic links or shell variables in pathnames. +It is called with the address of a string (the current directory name) as an +argument, and may modify that string. +If the string is replaced with a new string, the old value should be freed. +Any modified directory name should have a trailing slash. +The modified value will be used as part of the completion, replacing +the directory portion of the pathname the user typed. +At the least, even if no other expansion is performed, this function should +remove any quote characters from the directory name, because its result will +be passed directly to @code{opendir()}. + +The directory completion hook returns an integer that should be non-zero if +the function modifies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_directory_rewrite_hook; +If non-zero, this is the address of a function to call when completing +a directory name. This function takes the address of the directory name +to be modified as an argument. Unlike @code{rl_directory_completion_hook}, +it only modifies the directory name used in @code{opendir}, not what is +displayed when the possible completions are printed or inserted. It is +called before rl_directory_completion_hook. +At the least, even if no other expansion is performed, this function should +remove any quote characters from the directory name, because its result will +be passed directly to @code{opendir()}. + +The directory rewrite hook returns an integer that should be non-zero if +the function modfies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_filename_stat_hook +If non-zero, this is the address of a function for the completer to +call before deciding which character to append to a completed name. +This function modifies its filename name argument, and the modified value +is passed to @code{stat()} to determine the file's type and characteristics. +This function does not need to remove quote characters from the filename. + +The stat hook returns an integer that should be non-zero if +the function modfies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_dequote_func_t *} rl_filename_rewrite_hook +If non-zero, this is the address of a function called when reading +directory entries from the filesystem for completion and comparing +them to the partial word to be completed. The function should +perform any necessary application or system-specific conversion on +the filename, such as converting between character sets or converting +from a filesystem format to a character input format. +The function takes two arguments: @var{fname}, the filename to be converted, +and @var{fnlen}, its length in bytes. +It must either return its first argument (if no conversion takes place) +or the converted filename in newly-allocated memory. The converted +form is used to compare against the word to be completed, and, if it +matches, is added to the list of matches. Readline will free the +allocated string. +@end deftypevar + +@deftypevar {rl_compdisp_func_t *} rl_completion_display_matches_hook +If non-zero, then this is the address of a function to call when +completing a word would normally display the list of possible matches. +This function is called in lieu of Readline displaying the list. +It takes three arguments: +(@code{char **}@var{matches}, @code{int} @var{num_matches}, @code{int} @var{max_length}) +where @var{matches} is the array of matching strings, +@var{num_matches} is the number of strings in that array, and +@var{max_length} is the length of the longest string in that array. +Readline provides a convenience function, @code{rl_display_match_list}, +that takes care of doing the display to Readline's output stream. +You may call that function from this hook. +@end deftypevar + +@deftypevar {const char *} rl_basic_word_break_characters +The basic list of characters that signal a break between words for the +completer routine. The default value of this variable is the characters +which break words for completion in Bash: +@code{" \t\n\"\\'`@@$><=;|&@{("}. +@end deftypevar + +@deftypevar {const char *} rl_basic_quote_characters +A list of quote characters which can cause a word break. +@end deftypevar + +@deftypevar {const char *} rl_completer_word_break_characters +The list of characters that signal a break between words for +@code{rl_complete_internal()}. The default list is the value of +@code{rl_basic_word_break_characters}. +@end deftypevar + +@deftypevar {rl_cpvfunc_t *} rl_completion_word_break_hook +If non-zero, this is the address of a function to call when Readline is +deciding where to separate words for word completion. It should return +a character string like @code{rl_completer_word_break_characters} to be +used to perform the current completion. The function may choose to set +@code{rl_completer_word_break_characters} itself. If the function +returns @code{NULL}, @code{rl_completer_word_break_characters} is used. +@end deftypevar + +@deftypevar {const char *} rl_completer_quote_characters +A list of characters which can be used to quote a substring of the line. +Completion occurs on the entire substring, and within the substring +@code{rl_completer_word_break_characters} are treated as any other character, +unless they also appear within this list. +@end deftypevar + +@deftypevar {const char *} rl_filename_quote_characters +A list of characters that cause a filename to be quoted by the completer +when they appear in a completed filename. The default is the null string. +@end deftypevar + +@deftypevar {const char *} rl_special_prefixes +The list of characters that are word break characters, but should be +left in @var{text} when it is passed to the completion function. +Programs can use this to help determine what kind of completing to do. +For instance, Bash sets this variable to "$@@" so that it can complete +shell variables and hostnames. +@end deftypevar + +@deftypevar int rl_completion_query_items +Up to this many items will be displayed in response to a +possible-completions call. After that, readline asks the user if she is sure +she wants to see them all. The default value is 100. A negative value +indicates that Readline should never ask the user. +@end deftypevar + +@deftypevar {int} rl_completion_append_character +When a single completion alternative matches at the end of the command +line, this character is appended to the inserted completion text. The +default is a space character (@samp{ }). Setting this to the null +character (@samp{\0}) prevents anything being appended automatically. +This can be changed in application-specific completion functions to +provide the ``most sensible word separator character'' according to +an application-specific command line syntax specification. +It is set to the default before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_suppress_append +If non-zero, @var{rl_completion_append_character} is not appended to +matches at the end of the command line, as described above. +It is set to 0 before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_quote_character +When Readline is completing quoted text, as delimited by one of the +characters in @var{rl_completer_quote_characters}, it sets this variable +to the quoting character found. +This is set before any application-specific completion function is called. +@end deftypevar + +@deftypevar int rl_completion_suppress_quote +If non-zero, Readline does not append a matching quote character when +performing completion on a quoted string. +It is set to 0 before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_found_quote +When Readline is completing quoted text, it sets this variable +to a non-zero value if the word being completed contains or is delimited +by any quoting characters, including backslashes. +This is set before any application-specific completion function is called. +@end deftypevar + +@deftypevar int rl_completion_mark_symlink_dirs +If non-zero, a slash will be appended to completed filenames that are +symbolic links to directory names, subject to the value of the +user-settable @var{mark-directories} variable. +This variable exists so that application-specific completion functions +can override the user's global preference (set via the +@var{mark-symlinked-directories} Readline variable) if appropriate. +This variable is set to the user's preference before any +application-specific completion function is called, so unless that +function modifies the value, the user's preferences are honored. +@end deftypevar + +@deftypevar int rl_ignore_completion_duplicates +If non-zero, then duplicates in the matches are removed. +The default is 1. +@end deftypevar + +@deftypevar int rl_filename_completion_desired +Non-zero means that the results of the matches are to be treated as +filenames. This is @emph{always} zero when completion is attempted, +and can only be changed +within an application-specific completion function. If it is set to a +non-zero value by such a function, directory names have a slash appended +and Readline attempts to quote completed filenames if they contain any +characters in @code{rl_filename_quote_characters} and +@code{rl_filename_quoting_desired} is set to a non-zero value. +@end deftypevar + +@deftypevar int rl_filename_quoting_desired +Non-zero means that the results of the matches are to be quoted using +double quotes (or an application-specific quoting mechanism) if the +completed filename contains any characters in +@code{rl_filename_quote_chars}. This is @emph{always} non-zero +when completion is attempted, and can only be changed within an +application-specific completion function. +The quoting is effected via a call to the function pointed to +by @code{rl_filename_quoting_function}. +@end deftypevar + +@deftypevar int rl_attempted_completion_over +If an application-specific completion function assigned to +@code{rl_attempted_completion_function} sets this variable to a non-zero +value, Readline will not perform its default filename completion even +if the application's completion function returns no matches. +It should be set only by an application's completion function. +@end deftypevar + +@deftypevar int rl_sort_completion_matches +If an application sets this variable to 0, Readline will not sort the +list of completions (which implies that it cannot remove any duplicate +completions). The default value is 1, which means that Readline will +sort the completions and, depending on the value of +@code{rl_ignore_completion_duplicates}, will attempt to remove duplicate +matches. +@end deftypevar + +@deftypevar int rl_completion_type +Set to a character describing the type of completion Readline is currently +attempting; see the description of @code{rl_complete_internal()} +(@pxref{Completion Functions}) for the list of characters. +This is set to the appropriate value before any application-specific +completion function is called, allowing such functions to present +the same interface as @code{rl_complete()}. +@end deftypevar + +@deftypevar int rl_completion_invoking_key +Set to the final character in the key sequence that invoked one of the +completion functions that call @code{rl_complete_internal()}. This is +set to the appropriate value before any application-specific completion +function is called. +@end deftypevar + +@deftypevar int rl_inhibit_completion +If this variable is non-zero, completion is inhibited. The completion +character will be inserted as any other bound to @code{self-insert}. +@end deftypevar + +@node A Short Completion Example +@subsection A Short Completion Example + +Here is a small application demonstrating the use of the GNU Readline +library. It is called @code{fileman}, and the source code resides in +@file{examples/fileman.c}. This sample application provides +completion of command names, line editing features, and access to the +history list. + +@page +@smallexample +/* fileman.c -- A tiny application which demonstrates how to use the + GNU Readline library. This application interactively allows users + to manipulate files and their modes. */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#include <sys/types.h> +#ifdef HAVE_SYS_FILE_H +# include <sys/file.h> +#endif +#include <sys/stat.h> + +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif + +#include <fcntl.h> +#include <stdio.h> +#include <errno.h> + +#if defined (HAVE_STRING_H) +# include <string.h> +#else /* !HAVE_STRING_H */ +# include <strings.h> +#endif /* !HAVE_STRING_H */ + +#ifdef HAVE_STDLIB_H +# include <stdlib.h> +#endif + +#include <time.h> + +#include <readline/readline.h> +#include <readline/history.h> + +extern char *xmalloc PARAMS((size_t)); + +/* The names of functions that actually do the manipulation. */ +int com_list PARAMS((char *)); +int com_view PARAMS((char *)); +int com_rename PARAMS((char *)); +int com_stat PARAMS((char *)); +int com_pwd PARAMS((char *)); +int com_delete PARAMS((char *)); +int com_help PARAMS((char *)); +int com_cd PARAMS((char *)); +int com_quit PARAMS((char *)); + +/* A structure which contains information on the commands this program + can understand. */ + +typedef struct @{ + char *name; /* User printable name of the function. */ + rl_icpfunc_t *func; /* Function to call to do the job. */ + char *doc; /* Documentation for this function. */ +@} COMMAND; + +COMMAND commands[] = @{ + @{ "cd", com_cd, "Change to directory DIR" @}, + @{ "delete", com_delete, "Delete FILE" @}, + @{ "help", com_help, "Display this text" @}, + @{ "?", com_help, "Synonym for `help'" @}, + @{ "list", com_list, "List files in DIR" @}, + @{ "ls", com_list, "Synonym for `list'" @}, + @{ "pwd", com_pwd, "Print the current working directory" @}, + @{ "quit", com_quit, "Quit using Fileman" @}, + @{ "rename", com_rename, "Rename FILE to NEWNAME" @}, + @{ "stat", com_stat, "Print out statistics on FILE" @}, + @{ "view", com_view, "View the contents of FILE" @}, + @{ (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL @} +@}; + +/* Forward declarations. */ +char *stripwhite (); +COMMAND *find_command (); + +/* The name of this program, as taken from argv[0]. */ +char *progname; + +/* When non-zero, this global means the user is done using this program. */ +int done; + +char * +dupstr (s) + char *s; +@{ + char *r; + + r = xmalloc (strlen (s) + 1); + strcpy (r, s); + return (r); +@} + +main (argc, argv) + int argc; + char **argv; +@{ + char *line, *s; + + progname = argv[0]; + + initialize_readline (); /* Bind our completer. */ + + /* Loop reading and executing lines until the user quits. */ + for ( ; done == 0; ) + @{ + line = readline ("FileMan: "); + + if (!line) + break; + + /* Remove leading and trailing whitespace from the line. + Then, if there is anything left, add it to the history list + and execute it. */ + s = stripwhite (line); + + if (*s) + @{ + add_history (s); + execute_line (s); + @} + + free (line); + @} + exit (0); +@} + +/* Execute a command line. */ +int +execute_line (line) + char *line; +@{ + register int i; + COMMAND *command; + char *word; + + /* Isolate the command word. */ + i = 0; + while (line[i] && whitespace (line[i])) + i++; + word = line + i; + + while (line[i] && !whitespace (line[i])) + i++; + + if (line[i]) + line[i++] = '\0'; + + command = find_command (word); + + if (!command) + @{ + fprintf (stderr, "%s: No such command for FileMan.\n", word); + return (-1); + @} + + /* Get argument to command, if any. */ + while (whitespace (line[i])) + i++; + + word = line + i; + + /* Call the function. */ + return ((*(command->func)) (word)); +@} + +/* Look up NAME as the name of a command, and return a pointer to that + command. Return a NULL pointer if NAME isn't a command name. */ +COMMAND * +find_command (name) + char *name; +@{ + register int i; + + for (i = 0; commands[i].name; i++) + if (strcmp (name, commands[i].name) == 0) + return (&commands[i]); + + return ((COMMAND *)NULL); +@} + +/* Strip whitespace from the start and end of STRING. Return a pointer + into STRING. */ +char * +stripwhite (string) + char *string; +@{ + register char *s, *t; + + for (s = string; whitespace (*s); s++) + ; + + if (*s == 0) + return (s); + + t = s + strlen (s) - 1; + while (t > s && whitespace (*t)) + t--; + *++t = '\0'; + + return s; +@} + +/* **************************************************************** */ +/* */ +/* Interface to Readline Completion */ +/* */ +/* **************************************************************** */ + +char *command_generator PARAMS((const char *, int)); +char **fileman_completion PARAMS((const char *, int, int)); + +/* Tell the GNU Readline library how to complete. We want to try to complete + on command names if this is the first word in the line, or on filenames + if not. */ +initialize_readline () +@{ + /* Allow conditional parsing of the ~/.inputrc file. */ + rl_readline_name = "FileMan"; + + /* Tell the completer that we want a crack first. */ + rl_attempted_completion_function = fileman_completion; +@} + +/* Attempt to complete on the contents of TEXT. START and END bound the + region of rl_line_buffer that contains the word to complete. TEXT is + the word to complete. We can use the entire contents of rl_line_buffer + in case we want to do some simple parsing. Return the array of matches, + or NULL if there aren't any. */ +char ** +fileman_completion (text, start, end) + const char *text; + int start, end; +@{ + char **matches; + + matches = (char **)NULL; + + /* If this word is at the start of the line, then it is a command + to complete. Otherwise it is the name of a file in the current + directory. */ + if (start == 0) + matches = rl_completion_matches (text, command_generator); + + return (matches); +@} + +/* Generator function for command completion. STATE lets us know whether + to start from scratch; without any state (i.e. STATE == 0), then we + start at the top of the list. */ +char * +command_generator (text, state) + const char *text; + int state; +@{ + static int list_index, len; + char *name; + + /* If this is a new word to complete, initialize now. This includes + saving the length of TEXT for efficiency, and initializing the index + variable to 0. */ + if (!state) + @{ + list_index = 0; + len = strlen (text); + @} + + /* Return the next name which partially matches from the command list. */ + while (name = commands[list_index].name) + @{ + list_index++; + + if (strncmp (name, text, len) == 0) + return (dupstr(name)); + @} + + /* If no names matched, then return NULL. */ + return ((char *)NULL); +@} + +/* **************************************************************** */ +/* */ +/* FileMan Commands */ +/* */ +/* **************************************************************** */ + +/* String to pass to system (). This is for the LIST, VIEW and RENAME + commands. */ +static char syscom[1024]; + +/* List the file(s) named in arg. */ +com_list (arg) + char *arg; +@{ + if (!arg) + arg = ""; + + sprintf (syscom, "ls -FClg %s", arg); + return (system (syscom)); +@} + +com_view (arg) + char *arg; +@{ + if (!valid_argument ("view", arg)) + return 1; + +#if defined (__MSDOS__) + /* more.com doesn't grok slashes in pathnames */ + sprintf (syscom, "less %s", arg); +#else + sprintf (syscom, "more %s", arg); +#endif + return (system (syscom)); +@} + +com_rename (arg) + char *arg; +@{ + too_dangerous ("rename"); + return (1); +@} + +com_stat (arg) + char *arg; +@{ + struct stat finfo; + + if (!valid_argument ("stat", arg)) + return (1); + + if (stat (arg, &finfo) == -1) + @{ + perror (arg); + return (1); + @} + + printf ("Statistics for `%s':\n", arg); + + printf ("%s has %d link%s, and is %d byte%s in length.\n", + arg, + finfo.st_nlink, + (finfo.st_nlink == 1) ? "" : "s", + finfo.st_size, + (finfo.st_size == 1) ? "" : "s"); + printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); + printf (" Last access at: %s", ctime (&finfo.st_atime)); + printf (" Last modified at: %s", ctime (&finfo.st_mtime)); + return (0); +@} + +com_delete (arg) + char *arg; +@{ + too_dangerous ("delete"); + return (1); +@} + +/* Print out help for ARG, or for all of the commands if ARG is + not present. */ +com_help (arg) + char *arg; +@{ + register int i; + int printed = 0; + + for (i = 0; commands[i].name; i++) + @{ + if (!*arg || (strcmp (arg, commands[i].name) == 0)) + @{ + printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); + printed++; + @} + @} + + if (!printed) + @{ + printf ("No commands match `%s'. Possibilties are:\n", arg); + + for (i = 0; commands[i].name; i++) + @{ + /* Print in six columns. */ + if (printed == 6) + @{ + printed = 0; + printf ("\n"); + @} + + printf ("%s\t", commands[i].name); + printed++; + @} + + if (printed) + printf ("\n"); + @} + return (0); +@} + +/* Change to the directory ARG. */ +com_cd (arg) + char *arg; +@{ + if (chdir (arg) == -1) + @{ + perror (arg); + return 1; + @} + + com_pwd (""); + return (0); +@} + +/* Print out the current working directory. */ +com_pwd (ignore) + char *ignore; +@{ + char dir[1024], *s; + + s = getcwd (dir, sizeof(dir) - 1); + if (s == 0) + @{ + printf ("Error getting pwd: %s\n", dir); + return 1; + @} + + printf ("Current directory is %s\n", dir); + return 0; +@} + +/* The user wishes to quit using this program. Just set DONE non-zero. */ +com_quit (arg) + char *arg; +@{ + done = 1; + return (0); +@} + +/* Function which tells you that you can't do this. */ +too_dangerous (caller) + char *caller; +@{ + fprintf (stderr, + "%s: Too dangerous for me to distribute. Write it yourself.\n", + caller); +@} + +/* Return non-zero if ARG is a valid argument for CALLER, else print + an error message and return zero. */ +int +valid_argument (caller, arg) + char *caller, *arg; +@{ + if (!arg || !*arg) + @{ + fprintf (stderr, "%s: Argument required.\n", caller); + return (0); + @} + + return (1); +@} +@end smallexample |