diff options
Diffstat (limited to 'bin/tests/system/dnssec/tests.sh')
| -rw-r--r-- | bin/tests/system/dnssec/tests.sh | 3529 |
1 files changed, 3529 insertions, 0 deletions
diff --git a/bin/tests/system/dnssec/tests.sh b/bin/tests/system/dnssec/tests.sh new file mode 100644 index 0000000..434869a --- /dev/null +++ b/bin/tests/system/dnssec/tests.sh @@ -0,0 +1,3529 @@ +#!/bin/sh +# +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +SYSTEMTESTTOP=.. +. $SYSTEMTESTTOP/conf.sh + +status=0 +n=1 + +rm -f dig.out.* + +DIGOPTS="+tcp +noadd +nosea +nostat +nocmd +dnssec -p ${PORT}" +ADDITIONALOPTS="+noall +additional +dnssec -p ${PORT}" +ANSWEROPTS="+noall +answer +dnssec -p ${PORT}" +DELVOPTS="-a ns1/trusted.conf -p ${PORT}" +RNDCCMD="$RNDC -c $SYSTEMTESTTOP/common/rndc.conf -p ${CONTROLPORT} -s" + +# convert private-type records to readable form +showprivate () { + echo "-- $@ --" + $DIG $DIGOPTS +nodnssec +short @$2 -t type65534 $1 | cut -f3 -d' ' | + while read record; do + $PERL -e 'my $rdata = pack("H*", @ARGV[0]); + die "invalid record" unless length($rdata) == 5; + my ($alg, $key, $remove, $complete) = unpack("CnCC", $rdata); + my $action = "signing"; + $action = "removing" if $remove; + my $state = " (incomplete)"; + $state = " (complete)" if $complete; + print ("$action: alg: $alg, key: $key$state\n");' $record + done +} + +# check that signing records are marked as complete +checkprivate () { + ret=0 + x=`showprivate "$@"` + echo $x | grep incomplete >/dev/null 2>&1 && ret=1 + [ $ret = 1 ] && { + echo "$x" + echo_i "failed" + } + return $ret +} + +# check that a zone file is raw format, version 0 +israw0 () { + cat $1 | $PERL -e 'binmode STDIN; + read(STDIN, $input, 8); + ($style, $version) = unpack("NN", $input); + exit 1 if ($style != 2 || $version != 0);' + return $? +} + +# check that a zone file is raw format, version 1 +israw1 () { + cat $1 | $PERL -e 'binmode STDIN; + read(STDIN, $input, 8); + ($style, $version) = unpack("NN", $input); + exit 1 if ($style != 2 || $version != 1);' + return $? +} + +# strip NS and RRSIG NS from input +stripns () { + awk '($4 == "NS") || ($4 == "RRSIG" && $5 == "NS") { next} { print }' $1 +} + +# Check that for a query against a validating resolver where the +# authoritative zone is unsigned (insecure delegation), glue is returned +# in the additional section +echo_i "checking that additional glue is returned for unsigned delegation ($n)" +ret=0 +$DIG +tcp +dnssec -p ${PORT} a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +grep "ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 2" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ns\.insecure\.example\..*A.10\.53\.0\.3" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check the example. domain + +echo_i "checking that zone transfer worked ($n)" +for i in 1 2 3 4 5 6 7 8 9 +do + ret=0 + $DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 + $DIG $DIGOPTS a.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 + $PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1 + [ $ret = 0 ] && break + sleep 1 +done +digcomp dig.out.ns2.test$n dig.out.ns3.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# test AD bit: +# - dig +adflag asks for authentication (ad in response) +echo_i "checking AD bit asking for validation ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# test AD bit: +# - dig +noadflag +echo_i "checking that AD is not set without +adflag or +dnssec ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth +noadd +nodnssec +noadflag a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking for AD in authoritative answer ($n)" +ret=0 +$DIG $DIGOPTS a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns2.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking postive validation NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.example > delv.out$n || ret=1 + grep "a.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + grep "a.example..*.RRSIG.A 3 2 300 .*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking positive validation NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking positive validation NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.nsec3.example > delv.out$n || ret=1 + grep "a.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + grep "a.nsec3.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking positive validation OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking positive validation OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.optout.example > delv.out$n || ret=1 + grep "a.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + grep "a.optout.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking positive wildcard validation NSEC ($n)" +ret=0 +$DIG $DIGOPTS a.wild.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS a.wild.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n +stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n +digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1 +grep "\*\.wild\.example\..*RRSIG NSEC" dig.out.ns4.test$n > /dev/null || ret=1 +grep "\*\.wild\.example\..*NSEC z\.example" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking positive wildcard validation NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.wild.example > delv.out$n || ret=1 + grep "a.wild.example..*10.0.0.27" delv.out$n > /dev/null || ret=1 + grep "a.wild.example..*RRSIG.A 3 2 300.*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking positive wildcard answer NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +grep "AUTHORITY: 4," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive wildcard answer NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +grep "AUTHORITY: 4," dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive wildcard validation NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS a.wild.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n +stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n +digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking positive wildcard validation NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.wild.nsec3.example > delv.out$n || ret=1 + grep "a.wild.nsec3.example..*10.0.0.6" delv.out$n > /dev/null || ret=1 + grep "a.wild.nsec3.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking positive wildcard validation OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS a.wild.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS a.wild.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +stripns dig.out.ns3.test$n > dig.out.ns3.stripped.test$n +stripns dig.out.ns4.test$n > dig.out.ns4.stripped.test$n +digcomp dig.out.ns3.stripped.test$n dig.out.ns4.stripped.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking positive wildcard validation OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.wild.optout.example > delv.out$n || ret=1 + grep "a.wild.optout.example..*10.0.0.6" delv.out$n > /dev/null || ret=1 + grep "a.wild.optout.example..*RRSIG.A 7 3 300.*" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NXDOMAIN NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NXDOMAIN NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NXDOMAIN NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NXDOMAIN NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.nsec3.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NXDOMAIN OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NXDOMAIN OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.optout.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NODATA NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NODATA OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt a.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NODATA NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NODATA NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt a.nsec3.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative validation NODATA OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative validation NODATA OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt a.optout.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative wildcard validation NSEC ($n)" +ret=0 +$DIG $DIGOPTS b.wild.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS b.wild.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative wildcard validation NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt b.wild.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative wildcard validation NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS b.wild.nsec3.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative wildcard validation NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt b.wild.nsec3.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking negative wildcard validation OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS b.wild.optout.example. \ + @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS b.wild.optout.example. \ + @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking negative wildcard validation OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 txt b.optout.nsec3.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxrrset" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +# Check the insecure.example domain + +echo_i "checking 1-server insecurity proof NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server insecurity proof NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.insecure.example > delv.out$n || ret=1 + grep "a.insecure.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server insecurity proof NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server insecurity proof NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.insecure.nsec3.example > delv.out$n || ret=1 + grep "a.insecure.nsec3.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server insecurity proof OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.optout.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server insecurity proof OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a a.insecure.optout.example > delv.out$n || ret=1 + grep "a.insecure.optout.example..*10.0.0.1" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server negative insecurity proof NSEC ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.example. a @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server negative insecurity proof NSEC using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.insecure.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server negative insecurity proof NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS q.insecure.nsec3.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server negative insecurity proof NSEC3 using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.insecure.nsec3.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server negative insecurity proof OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS q.insecure.optout.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking 1-server negative insecurity proof OPTOUT using dns_client ($n)" + $DELV $DELVOPTS @10.53.0.4 a q.insecure.optout.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: ncache nxdomain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking 1-server negative insecurity proof with SOA hack NSEC ($n)" +ret=0 +$DIG $DIGOPTS r.insecure.example. soa @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS r.insecure.example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking 1-server negative insecurity proof with SOA hack NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS r.insecure.nsec3.example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking 1-server negative insecurity proof with SOA hack OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS r.insecure.optout.example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +grep "0 IN SOA" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check the secure.example domain + +echo_i "checking multi-stage positive validation NSEC/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation NSEC/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation NSEC/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation NSEC3/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation NSEC3/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation NSEC3/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation OPTOUT/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation OPTOUT/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking multi-stage positive validation OPTOUT/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking empty NODATA OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth empty.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth empty.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check the bogus domain + +echo_i "checking failed validation ($n)" +ret=0 +$DIG $DIGOPTS a.bogus.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking failed validation using dns_client ($n)" + $DELV $DELVOPTS +cd @10.53.0.4 a a.bogus.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: RRSIG failed to verify" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +# Try validating with a bad trusted key. +# This should fail. + +echo_i "checking that validation fails with a misconfigured trusted key ($n)" +ret=0 +$DIG $DIGOPTS example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1 +grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that negative validation fails with a misconfigured trusted key ($n)" +ret=0 +$DIG $DIGOPTS example. ptr @10.53.0.5 > dig.out.ns5.test$n || ret=1 +grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that insecurity proofs fail with a misconfigured trusted key ($n)" +ret=0 +$DIG $DIGOPTS a.insecure.example. a @10.53.0.5 > dig.out.ns5.test$n || ret=1 +grep "SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation fails when key record is missing ($n)" +ret=0 +$DIG $DIGOPTS a.b.keyless.example. a @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking that validation fails when key record is missing using dns_client ($n)" + $DELV $DELVOPTS +cd @10.53.0.4 a a.b.keyless.example > delv.out$n 2>&1 || ret=1 + grep "resolution failed: broken trust chain" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "checking that validation succeeds when a revoked key is encountered ($n)" +ret=0 +$DIG $DIGOPTS revkey.example soa @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags: .* ad" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +if [ -x ${DELV} ] ; then + ret=0 + echo_i "checking that validation succeeds when a revoked key is encountered using dns_client ($n)" + $DELV $DELVOPTS +cd @10.53.0.4 soa revkey.example > delv.out$n 2>&1 || ret=1 + grep "fully validated" delv.out$n > /dev/null || ret=1 + n=`expr $n + 1` + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` +fi + +echo_i "Checking that a bad CNAME signature is caught after a +CD query ($n)" +ret=0 +#prime +$DIG $DIGOPTS +cd bad-cname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1 +#check: requery with +CD. pending data should be returned even if it's bogus +expect="a.example. +10.0.0.1" +ans=`$DIG $DIGOPTS +cd +nodnssec +short bad-cname.example. @10.53.0.4` || ret=1 +test "$ans" = "$expect" || ret=1 +test $ret = 0 || echo_i "failed, got '$ans', expected '$expect'" +#check: requery without +CD. bogus cached data should be rejected. +$DIG $DIGOPTS +nodnssec bad-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "Checking that a bad DNAME signature is caught after a +CD query ($n)" +ret=0 +#prime +$DIG $DIGOPTS +cd a.bad-dname.example. @10.53.0.4 > dig.out.ns4.prime$n || ret=1 +#check: requery with +CD. pending data should be returned even if it's bogus +expect="example. +a.example. +10.0.0.1" +ans=`$DIG $DIGOPTS +cd +nodnssec +short a.bad-dname.example. @10.53.0.4` || ret=1 +test "$ans" = "$expect" || ret=1 +test $ret = 0 || echo_i "failed, got '$ans', expected '$expect'" +#check: requery without +CD. bogus cached data should be rejected. +$DIG $DIGOPTS +nodnssec a.bad-dname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check the insecure.secure.example domain (insecurity proof) + +echo_i "checking 2-server insecurity proof ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.2 a \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check a negative response in insecure.secure.example + +echo_i "checking 2-server insecurity proof with a negative answer ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.2 a > dig.out.ns2.test$n \ + || ret=1 +$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \ + || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking 2-server insecurity proof with a negative answer and SOA hack ($n)" +ret=0 +$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.2 soa > dig.out.ns2.test$n \ + || ret=1 +$DIG $DIGOPTS r.insecure.secure.example. @10.53.0.4 soa > dig.out.ns4.test$n \ + || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check that the query for a security root is successful and has ad set + +echo_i "checking security root query ($n)" +ret=0 +$DIG $DIGOPTS . @10.53.0.4 key > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check that the setting the cd bit works + +echo_i "checking cd bit on a positive answer ($n)" +ret=0 +$DIG $DIGOPTS +noauth example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$DIG $DIGOPTS +noauth +cdflag example. soa @10.53.0.5 \ + > dig.out.ns5.test$n || ret=1 +digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking cd bit on a negative answer ($n)" +ret=0 +$DIG $DIGOPTS q.example. soa @10.53.0.4 > dig.out.ns4.test$n || ret=1 +$DIG $DIGOPTS +cdflag q.example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1 +digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation RSASHA256 NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation RSASHA512 NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation with KSK-only DNSKEY signature ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.kskonly.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking cd bit on a query that should fail ($n)" +ret=0 +$DIG $DIGOPTS a.bogus.example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$DIG $DIGOPTS +cdflag a.bogus.example. soa @10.53.0.5 \ + > dig.out.ns5.test$n || ret=1 +digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking cd bit on an insecurity proof ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.example. soa @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$DIG $DIGOPTS +noauth +cdflag a.insecure.example. soa @10.53.0.5 \ + > dig.out.ns5.test$n || ret=1 +digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - these are looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking cd bit on a negative insecurity proof ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$DIG $DIGOPTS +cdflag q.insecure.example. a @10.53.0.5 \ + > dig.out.ns5.test$n || ret=1 +digcomp dig.out.ns4.test$n dig.out.ns5.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - these are looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation of an ANY query works ($n)" +ret=0 +$DIG $DIGOPTS +noauth foo.example. any @10.53.0.2 > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth foo.example. any @10.53.0.4 > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# 2 records in the zone, 1 NXT, 3 SIGs +grep "ANSWER: 6" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation of a query returning a CNAME works ($n)" +ret=0 +$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth cname1.example. txt @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# the CNAME & its sig, the TXT and its SIG +grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation of a query returning a DNAME works ($n)" +ret=0 +$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth foo.dname1.example. txt @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# The DNAME & its sig, the TXT and its SIG, and the synthesized CNAME. +# It would be nice to test that the CNAME is being synthesized by the +# recursive server and not cached, but I don't know how. +grep "ANSWER: 5" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation of an ANY query returning a CNAME works ($n)" +ret=0 +$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth cname2.example. any @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# The CNAME, NXT, and their SIGs +grep "ANSWER: 4" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that validation of an ANY query returning a DNAME works ($n)" +ret=0 +$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth foo.dname2.example. any @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that positive validation in a privately secure zone works ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that negative validation in a privately secure zone works ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that lookups succeed after disabling a algorithm works ($n)" +ret=0 +$DIG $DIGOPTS +noauth example. SOA @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth example. SOA @10.53.0.6 \ + > dig.out.ns6.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking privately secure to nxdomain works ($n)" +ret=0 +$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking privately secure wildcard to nxdomain works ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.wild.private.secure.example. SOA @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.wild.private.secure.example. SOA @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +$PERL ../digcomp.pl dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking a non-cachable NODATA works ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.7 \ + > dig.out.ns7.test$n || ret=1 +grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noauth a.nosoa.secure.example. txt @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking a non-cachable NXDOMAIN works ($n)" +ret=0 +$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.7 \ + > dig.out.ns7.test$n || ret=1 +grep "AUTHORITY: 0" dig.out.ns7.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noauth b.nosoa.secure.example. txt @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# +# private.secure.example is served by the same server as its +# grand parent and there is not a secure delegation from secure.example +# to private.secure.example. In addition secure.example is using a +# algorithm which the validation does not support. +# +echo_i "checking dnssec-lookaside-validation works ($n)" +ret=0 +$DIG $DIGOPTS private.secure.example. SOA @10.53.0.6 \ + > dig.out.ns6.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns6.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that we can load a rfc2535 signed zone ($n)" +ret=0 +$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that we can transfer a rfc2535 signed zone ($n)" +ret=0 +$DIG $DIGOPTS rfc2535.example. SOA @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "basic dnssec-signzone checks:" +echo_i " two DNSKEYs ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test1.zone > signer.out.$n 2>&1 +test -f signed.zone +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " one non-KSK DNSKEY ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test2.zone > signer.out.$n 2>&1 +test -f signed.zone +) && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " one KSK DNSKEY ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test3.zone > signer.out.$n 2>&1 +test -f signed.zone +) && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " three DNSKEY ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test4.zone > signer.out.$n 2>&1 +test -f signed.zone +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " three DNSKEY, one private key missing ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test5.zone > signer.out.$n 2>&1 +test -f signed.zone +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " four DNSKEY ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test6.zone > signer.out.$n 2>&1 +test -f signed.zone +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " two DNSKEY, both private keys missing ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test7.zone > signer.out.$n 2>&1 +test -f signed.zone +) && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i " two DNSKEY, one private key missing ($n)" +ret=0 +( +cd signer/general +rm -f signed.zone +$SIGNER -f signed.zone -o example.com. test8.zone > signer.out.$n 2>&1 +test -f signed.zone +) && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that we can sign a zone with out-of-zone records ($n)" +ret=0 +zone=example +key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone` +key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone` +( +cd signer +cat example.db.in $key1.key $key2.key > example.db +$SIGNER -o example -f example.db example.db > /dev/null 2>&1 +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that we can sign a zone (NSEC3) with out-of-zone records ($n)" +ret=0 +zone=example +key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone` +key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone` +( +cd signer +cat example.db.in $key1.key $key2.key > example.db +$SIGNER -3 - -H 10 -o example -f example.db example.db > /dev/null 2>&1 +awk '/^IQF9LQTLK/ { + printf("%s", $0); + while (!index($0, ")")) { + if (getline <= 0) + break; + printf (" %s", $0); + } + printf("\n"); + }' example.db | sed 's/[ ][ ]*/ /g' > nsec3param.out + +grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking NSEC3 signing with empty nonterminals above a delegation ($n)" +ret=0 +zone=example +key1=`$KEYGEN -K signer -q -r $RANDFILE -a NSEC3RSASHA1 -b 1024 -n zone $zone` +key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a NSEC3RSASHA1 -b 1024 -n zone $zone` +( +cd signer +cat example.db.in $key1.key $key2.key > example3.db +echo "some.empty.nonterminal.nodes.example 60 IN NS ns.example.tld" >> example3.db +$SIGNER -3 - -A -H 10 -o example -f example3.db example3.db > /dev/null 2>&1 +awk '/^IQF9LQTLK/ { + printf("%s", $0); + while (!index($0, ")")) { + if (getline <= 0) + break; + printf (" %s", $0); + } + printf("\n"); + }' example.db | sed 's/[ ][ ]*/ /g' > nsec3param.out + +grep "IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG.example. 0 IN NSEC3 1 0 10 - ( IQF9LQTLKKNFK0KVIFELRAK4IC4QLTMG A NS SOA RRSIG DNSKEY NSEC3PARAM )" nsec3param.out > /dev/null +) || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that dnsssec-signzone updates originalttl on ttl changes ($n)" +ret=0 +zone=example +key1=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone` +key2=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone` +( +cd signer +cat example.db.in $key1.key $key2.key > example.db +$SIGNER -o example -f example.db.before example.db > /dev/null 2>&1 +sed 's/60.IN.SOA./50 IN SOA /' example.db.before > example.db.changed +$SIGNER -o example -f example.db.after example.db.changed > /dev/null 2>&1 +) +grep "SOA 5 1 50" signer/example.db.after > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone keeps valid signatures from removed keys ($n)" +ret=0 +zone=example +key1=`$KEYGEN -K signer -q -r $RANDFILE -f KSK -a RSASHA1 -b 1024 -n zone $zone` +key2=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone` +keyid2=`echo $key2 | sed 's/^Kexample.+005+0*\([0-9]\)/\1/'` +key3=`$KEYGEN -K signer -q -r $RANDFILE -a RSASHA1 -b 1024 -n zone $zone` +keyid3=`echo $key3 | sed 's/^Kexample.+005+0*\([0-9]\)/\1/'` +( +cd signer +cat example.db.in $key1.key $key2.key > example.db +$SIGNER -D -o example example.db > /dev/null 2>&1 + +# now switch out key2 for key3 and resign the zone +cat example.db.in $key1.key $key3.key > example.db +echo '$INCLUDE "example.db.signed"' >> example.db +$SIGNER -D -o example example.db > /dev/null 2>&1 +) || ret=1 +grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone -R purges signatures from removed keys ($n)" +ret=0 +( +cd signer +$SIGNER -RD -o example example.db > /dev/null 2>&1 +) || ret=1 +grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 && ret=1 +grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone keeps valid signatures from inactive keys ($n)" +ret=0 +zone=example +( +cd signer +cp -f example.db.in example.db +$SIGNER -SD -o example example.db > /dev/null 2>&1 +echo '$INCLUDE "example.db.signed"' >> example.db +# now retire key2 and resign the zone +$SETTIME -I now $key2 > /dev/null 2>&1 +$SIGNER -SD -o example example.db > /dev/null 2>&1 +) || ret=1 +grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone -Q purges signatures from inactive keys ($n)" +ret=0 +( +cd signer +$SIGNER -SDQ -o example example.db > /dev/null 2>&1 +) || ret=1 +grep " $keyid2 " signer/example.db.signed > /dev/null 2>&1 && ret=1 +grep " $keyid3 " signer/example.db.signed > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone retains unexpired signatures ($n)" +ret=0 +( +cd signer +$SIGNER -Sxt -o example example.db > signer.out.1 2>&1 +$SIGNER -Sxt -o example -f example.db.signed example.db.signed > signer.out.2 2>&1 +) || ret=1 +gen1=`awk '/generated/ {print $3}' signer/signer.out.1` +retain1=`awk '/retained/ {print $3}' signer/signer.out.1` +drop1=`awk '/dropped/ {print $3}' signer/signer.out.1` +gen2=`awk '/generated/ {print $3}' signer/signer.out.2` +retain2=`awk '/retained/ {print $3}' signer/signer.out.2` +drop2=`awk '/dropped/ {print $3}' signer/signer.out.2` +[ "$retain2" -eq `expr "$gen1" + "$retain1"` ] || ret=1 +[ "$gen2" -eq 0 ] || ret=1 +[ "$drop2" -eq 0 ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec) ($n)" +ret=0 +( +cd signer +# remove NSEC-only keys +rm -f Kexample.+005* +cp -f example.db.in example2.db +cat << EOF >> example2.db +sub1.example. IN A 10.53.0.1 +ns.sub2.example. IN A 10.53.0.2 +EOF +echo '$INCLUDE "example2.db.signed"' >> example2.db +touch example2.db.signed +$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1 +) || ret=1 +grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1 +grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1 +( +cd signer +cp -f example.db.in example2.db +cat << EOF >> example2.db +sub1.example. IN NS sub1.example. +sub1.example. IN A 10.53.0.1 +sub2.example. IN NS ns.sub2.example. +ns.sub2.example. IN A 10.53.0.2 +EOF +echo '$INCLUDE "example2.db.signed"' >> example2.db +$SIGNER -DS -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1 +) || ret=1 +grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1 +grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone purges RRSIGs from formerly-owned glue (nsec3) ($n)" +ret=0 +( +cd signer +rm -f example2.db.signed +cp -f example.db.in example2.db +cat << EOF >> example2.db +sub1.example. IN A 10.53.0.1 +ns.sub2.example. IN A 10.53.0.2 +EOF +echo '$INCLUDE "example2.db.signed"' >> example2.db +touch example2.db.signed +$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1 +) || ret=1 +grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1 +grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 || ret=1 +( +cd signer +cp -f example.db.in example2.db +cat << EOF >> example2.db +sub1.example. IN NS sub1.example. +sub1.example. IN A 10.53.0.1 +sub2.example. IN NS ns.sub2.example. +ns.sub2.example. IN A 10.53.0.2 +EOF +echo '$INCLUDE "example2.db.signed"' >> example2.db +$SIGNER -DS -3 feedabee -O full -f example2.db.signed -o example example2.db > /dev/null 2>&1 +) || ret=1 +grep "^sub1\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1 +grep "^ns\.sub2\.example\..*RRSIG[ ]A[ ]" signer/example2.db.signed > /dev/null 2>&1 && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone output format ($n)" +ret=0 +( +cd signer +$SIGNER -O full -f - -Sxt -o example example.db > signer.out.3 2> /dev/null +$SIGNER -O text -f - -Sxt -o example example.db > signer.out.4 2> /dev/null +$SIGNER -O raw -f signer.out.5 -Sxt -o example example.db > /dev/null 2>&1 +$SIGNER -O raw=0 -f signer.out.6 -Sxt -o example example.db > /dev/null 2>&1 +$SIGNER -O raw -f - -Sxt -o example example.db > signer.out.7 2> /dev/null +) || ret=1 +awk '/IN *SOA/ {if (NF != 11) exit(1)}' signer/signer.out.3 || ret=1 +awk '/IN *SOA/ {if (NF != 7) exit(1)}' signer/signer.out.4 || ret=1 +israw1 signer/signer.out.5 || ret=1 +israw0 signer/signer.out.6 || ret=1 +israw1 signer/signer.out.7 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone output format ($n)" +ret=0 +( +cd signer +$SIGNER -O full -f - -Sxt -o example example.db > signer.out.3 2>&1 +$SIGNER -O text -f - -Sxt -o example example.db > signer.out.4 2>&1 +) || ret=1 +awk '/IN *SOA/ {if (NF != 11) exit(1)}' signer/signer.out.3 || ret=1 +awk '/IN *SOA/ {if (NF != 7) exit(1)}' signer/signer.out.4 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking TTLs are capped by dnssec-signzone -M ($n)" +ret=0 +( +cd signer +$SIGNER -O full -f signer.out.8 -S -M 30 -o example example.db > /dev/null 2>&1 +) || ret=1 +awk '/^;/ { next; } $2 > 30 { exit 1; }' signer/signer.out.8 || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnssec-signzone -N date ($n)" +ret=0 +( +cd signer +$SIGNER -O full -f signer.out.9 -S -N date -o example example2.db > /dev/null 2>&1 +) || ret=1 +now=`$PERL -e '@lt=localtime(); printf "%.4d%0.2d%0.2d00\n",$lt[5]+1900,$lt[4]+1,$lt[3];'` +serial=`awk '/^;/ { next; } $4 == "SOA" { print $7 }' signer/signer.out.9` +[ "$now" -eq "$serial" ] || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking validated data are not cached longer than originalttl ($n)" +ret=0 +$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +ttl +noauth a.ttlpatch.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +grep "3600.IN" dig.out.ns3.test$n > /dev/null || ret=1 +grep "300.IN" dig.out.ns3.test$n > /dev/null && ret=1 +grep "300.IN" dig.out.ns4.test$n > /dev/null || ret=1 +grep "3600.IN" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Test that "rndc secroots" is able to dump trusted keys +echo_i "checking rndc secroots ($n)" +ret=0 +$RNDCCMD 10.53.0.4 secroots 2>&1 | sed 's/^/ns4 /' | cat_i +keyid=`cat ns1/managed.key.id` +cp ns4/named.secroots named.secroots.test$n +linecount=`grep "./RSAMD5/$keyid ; trusted" named.secroots.test$n | wc -l` +[ "$linecount" -eq 1 ] || ret=1 +linecount=`cat named.secroots.test$n | wc -l` +[ "$linecount" -eq 10 ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check direct query for RRSIG. If we first ask for normal (non RRSIG) +# record, the corresponding RRSIG should be cached and subsequent query +# for RRSIG will be returned with the cached record. +echo_i "checking RRSIG query from cache ($n)" +ret=0 +$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 a > /dev/null || ret=1 +ans=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.4 rrsig` || ret=1 +expect=`$DIG $DIGOPTS +short normalthenrrsig.secure.example. @10.53.0.3 rrsig | grep '^A' ` || ret=1 +test "$ans" = "$expect" || ret=1 +# also check that RA is set +$DIG $DIGOPTS normalthenrrsig.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1 +grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Check direct query for RRSIG: If it's not cached with other records, +# it should result in an empty response. +echo_i "checking RRSIG query not in cache ($n)" +ret=0 +ans=`$DIG $DIGOPTS +short rrsigonly.secure.example. @10.53.0.4 rrsig` || ret=1 +test -z "$ans" || ret=1 +# also check that RA is cleared +$DIG $DIGOPTS rrsigonly.secure.example. @10.53.0.4 rrsig > dig.out.ns4.test$n || ret=1 +grep "flags:.*ra.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# +# RT21868 regression test. +# +echo_i "checking NSEC3 zone with mismatched NSEC3PARAM / NSEC parameters ($n)" +ret=0 +$DIG $DIGOPTS non-exist.badparam. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# +# RT22007 regression test. +# +echo_i "checking optout NSEC3 referral with only insecure delegations ($n)" +ret=0 +$DIG $DIGOPTS +norec delegation.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 +grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking optout NSEC3 NXDOMAIN with only insecure delegations ($n)" +ret=0 +$DIG $DIGOPTS +norec nonexist.single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns2.test$n > /dev/null || ret=1 +grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi + +status=`expr $status + $ret` +echo_i "checking optout NSEC3 nodata with only insecure delegations ($n)" +ret=0 +$DIG $DIGOPTS +norec single-nsec3. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1 +grep "3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN.*NSEC3 1 1 1 - 3KL3NK1HKQ4IUEEHBEF12VGFKUETNBAN" dig.out.ns2.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that a zone finishing the transition from RSASHA1 to RSASHA256 validates secure ($n)" +ret=0 +$DIG $DIGOPTS ns algroll. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive and negative validation with negative trust anchors ($n)" +ret=0 + +# +# check correct initial behavior +# +$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.1 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.1 > /dev/null || ret=1 +$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null || ret=1 +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null || ret=1 + +if [ $ret != 0 ]; then echo_i "failed - checking initial state"; fi +status=`expr $status + $ret` +ret=0 + +# +# add negative trust anchors +# +$RNDCCMD 10.53.0.4 nta -f -l 20s bogus.example 2>&1 | sed 's/^/ns4 /' | cat_i +$RNDCCMD 10.53.0.4 nta badds.example 2>&1 | sed 's/^/ns4 /' | cat_i +# reconfig should maintain NTAs +$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 +lines=`wc -l < rndc.out.ns4.test$n.1` +[ "$lines" -eq 2 ] || ret=1 +$RNDCCMD 10.53.0.4 nta secure.example 2>&1 | sed 's/^/ns4 /' | cat_i +$RNDCCMD 10.53.0.4 nta fakenode.secure.example 2>&1 | sed 's/^/ns4 /' | cat_i +# reload should maintain NTAs +$RNDCCMD 10.53.0.4 reload 2>&1 | sed 's/^/ns4 /' | cat_i +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.2 +lines=`wc -l < rndc.out.ns4.test$n.2` +[ "$lines" -eq 4 ] || ret=1 +start=`$PERL -e 'print time()."\n";'` + +if [ $ret != 0 ]; then echo_i "failed - adding NTA's failed"; fi +status=`expr $status + $ret` +ret=0 + +# +# check behavior with NTA's in place +# +$DIG $DIGOPTS a.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.4 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.4 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.4 > /dev/null && ret=1 +$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.5 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.5 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.5 > /dev/null && ret=1 +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.6 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.6 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.6 > /dev/null && ret=1 +$DIG $DIGOPTS a.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.7 || ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.7 > /dev/null && ret=1 +echo_i "dumping secroots" +$RNDCCMD 10.53.0.4 secroots | sed 's/^/ns4 /' | cat_i +grep "bogus.example: expiry" ns4/named.secroots > /dev/null || ret=1 +grep "badds.example: expiry" ns4/named.secroots > /dev/null || ret=1 +grep "secure.example: expiry" ns4/named.secroots > /dev/null || ret=1 +grep "fakenode.secure.example: expiry" ns4/named.secroots > /dev/null || ret=1 + +if [ $ret != 0 ]; then echo_i "failed - with NTA's in place failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "waiting for NTA rechecks/expirations" + +# +# secure.example and badds.example used default nta-duration +# (configured as 10s in ns4/named1.conf), but nta recheck interval +# is configured to 7s, so at t=8 the NTAs for secure.example and +# fakenode.secure.example should both be lifted, but badds.example +# should still be going. +# +$PERL -e 'my $delay = '$start' + 10 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' +$DIG $DIGOPTS b.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.8 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.8 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.8 > /dev/null || ret=1 +$DIG $DIGOPTS b.fakenode.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.9 || ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.9 > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n.9 > /dev/null || ret=1 +$DIG $DIGOPTS badds.example. soa @10.53.0.4 > dig.out.ns4.test$n.10 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.10 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.10 > /dev/null && ret=1 + +if [ $ret != 0 ]; then echo_i "failed - checking that default nta's were lifted due to recheck"; fi +status=`expr $status + $ret` +ret=0 + +# +# bogus.example was set to expire in 20s, so at t=11 +# it should still be NTA'd, but badds.example used the default +# lifetime of 10s, so it should revert to SERVFAIL now. +# +$PERL -e 'my $delay = '$start' + 13 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' +# check nta table +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n._11 +lines=`wc -l < rndc.out.ns4.test$n._11` +[ "$lines" -le 2 ] || ret=1 +grep "bogus.example: expiry" rndc.out.ns4.test$n._11 > /dev/null || ret=1 +grep "badds.example: expiry" rndc.out.ns4.test$n._11 > /dev/null && ret=1 +$DIG $DIGOPTS b.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.11 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.11 > /dev/null && ret=1 +$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.12 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.12 > /dev/null || ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.12 > /dev/null && ret=1 +$DIG $DIGOPTS c.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.13 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.13 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.13 > /dev/null || ret=1 + +if [ $ret != 0 ]; then echo_i "failed - checking that default nta's were lifted due to lifetime"; fi +status=`expr $status + $ret` +ret=0 + +# +# at t=21, all the NTAs should have expired. +# +$PERL -e 'my $delay = '$start' + 21 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' +# check correct behavior after bogus.example expiry +$DIG $DIGOPTS d.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.14 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.14 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.14 > /dev/null || ret=1 +$DIG $DIGOPTS c.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.15 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.15 > /dev/null || ret=1 +# check nta table has been cleaned up now +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3 +lines=`wc -l < rndc.out.ns4.test$n.3` +[ "$lines" -eq 0 ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed - checking that all nta's have been lifted"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "testing NTA removals ($n)" +$RNDCCMD 10.53.0.4 nta badds.example 2>&1 | sed 's/^/ns4 /' | cat_i +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 +grep "badds.example: expiry" rndc.out.ns4.test$n.1 > /dev/null || ret=1 +$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.1 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.1 > /dev/null && ret=1 +grep "^a.badds.example." dig.out.ns4.test$n.1 > /dev/null || ret=1 +$RNDCCMD 10.53.0.4 nta -remove badds.example > rndc.out.ns4.test$n.2 +grep "Negative trust anchor removed: badds.example/_default" rndc.out.ns4.test$n.2 > /dev/null || ret=1 +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3 +grep "badds.example: expiry" rndc.out.ns4.test$n.3 > /dev/null && ret=1 +$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "remove non-existent NTA three times" +$RNDCCMD 10.53.0.4 nta -r foo > rndc.out.ns4.test$n.4 2>&1 +$RNDCCMD 10.53.0.4 nta -remove foo > rndc.out.ns4.test$n.5 2>&1 +$RNDCCMD 10.53.0.4 nta -r foo > rndc.out.ns4.test$n.6 2>&1 +grep "'nta' failed: not found" rndc.out.ns4.test$n.6 > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` +ret=0 + +n=`expr $n + 1` +echo_i "testing NTA with bogus lifetimes ($n)" +echo_i "check with no nta lifetime specified" +$RNDCCMD 10.53.0.4 nta -l "" foo > rndc.out.ns4.test$n.1 2>&1 +grep "'nta' failed: bad ttl" rndc.out.ns4.test$n.1 > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "check with bad nta lifetime" +$RNDCCMD 10.53.0.4 nta -l garbage foo > rndc.out.ns4.test$n.2 2>&1 +grep "'nta' failed: bad ttl" rndc.out.ns4.test$n.2 > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "check with too long nta lifetime" +$RNDCCMD 10.53.0.4 nta -l 7d1h foo > rndc.out.ns4.test$n.3 2>&1 +grep "'nta' failed: out of range" rndc.out.ns4.test$n.3 > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` +ret=0 + +# +# check NTA persistence across restarts +# +n=`expr $n + 1` +echo_i " testing NTA persistence across restarts ($n)" +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 +lines=`wc -l < rndc.out.ns4.test$n.1` +[ "$lines" -eq 0 ] || ret=1 +$RNDCCMD 10.53.0.4 nta -f -l 30s bogus.example 2>&1 | sed 's/^/I:ns4 /' +$RNDCCMD 10.53.0.4 nta -f -l 10s badds.example 2>&1 | sed 's/^/I:ns4 /' +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.2 +lines=`wc -l < rndc.out.ns4.test$n.2` +[ "$lines" -eq 2 ] || ret=1 +start=`$PERL -e 'print time()."\n";'` + +if [ $ret != 0 ]; then echo_i "failed - NTA persistence: adding NTA's failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "killing ns4 with SIGTERM" +cd ns4 +$KILL -TERM `cat named.pid` +rm -f named.pid +cd .. + +# +# ns4 has now shutdown. wait until t=14 when badds.example's NTA +# (lifetime=10s) would have expired, and then restart ns4. +# +echo_i "waiting till 14s have passed since NTAs were added before restarting ns4" +$PERL -e 'my $delay = '$start' + 14 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' + +if + $PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns4 +then + echo_i "restarted server ns4" +else + echo_i "could not restart server ns4" + exit 1 +fi + +echo_i "sleeping for an additional 4 seconds for ns4 to fully startup" +sleep 4 + +# +# ns4 should be back up now. The NTA for bogus.example should still be +# valid, whereas badds.example should not have been added during named +# startup (as it had already expired), the fact that it's ignored should +# be logged. +# +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.3 +lines=`wc -l < rndc.out.ns4.test$n.3` +[ "$lines" -eq 1 ] || ret=1 +grep "bogus.example: expiry" rndc.out.ns4.test$n.3 > /dev/null || ret=1 +$DIG $DIGOPTS b.bogus.example. a @10.53.0.4 > dig.out.ns4.test$n.4 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.4 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.4 > /dev/null && ret=1 +$DIG $DIGOPTS a.badds.example. a @10.53.0.4 > dig.out.ns4.test$n.5 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.5 > /dev/null || ret=1 +grep "ignoring expired NTA at badds.example" ns4/named.run > /dev/null || ret=1 + +# cleanup +$RNDCCMD 10.53.0.4 nta -remove bogus.example > rndc.out.ns4.test$n.6 + +if [ $ret != 0 ]; then echo_i "failed - NTA persistence: restoring NTA failed"; fi +status=`expr $status + $ret` +ret=0 + +# +# check "regular" attribute in NTA file works as expected at named +# startup. +# +n=`expr $n + 1` +echo_i "testing loading regular attribute from NTA file ($n)" +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null +lines=`wc -l < rndc.out.ns4.test$n.1` +[ "$lines" -eq 0 ] || ret=1 +# initially, secure.example. validates with AD=1 +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.2 > /dev/null || ret=1 + +echo_i "killing ns4 with SIGTERM" +cd ns4 +$KILL -TERM `cat named.pid` +rm -f named.pid +cd .. + +echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown" +sleep 4 + +# +# ns4 has now shutdown. add NTA for secure.example. directly into the +# _default.nta file with the regular attribute and some future timestamp. +# +year=`date +%Y` +future="`expr 20 + ${year}`0101010000" +echo "secure.example. regular $future" > ns4/_default.nta +start=`$PERL -e 'print time()."\n";'` + +if + $PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns4 +then + echo_i "restarted server ns4" +else + echo_i "could not restart server ns4" + exit 1 +fi + +# nta-recheck is configured as 7s, so at t=10 the NTAs for +# secure.example. should be lifted as it is not a forced NTA. +echo_i "waiting till 10s have passed after ns4 was restarted" +$PERL -e 'my $delay = '$start' + 10 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' + +# secure.example. should now return an AD=1 answer (still validates) as +# the NTA has been lifted. +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null || ret=1 + +# cleanup +$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.4 2>/dev/null + +if [ $ret != 0 ]; then echo_i "failed - NTA persistence: loading regular NTAs failed"; fi +status=`expr $status + $ret` +ret=0 + +# +# check "forced" attribute in NTA file works as expected at named +# startup. +# +n=`expr $n + 1` +echo_i "testing loading forced attribute from NTA file ($n)" +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null +lines=`wc -l < rndc.out.ns4.test$n.1` +[ "$lines" -eq 0 ] || ret=1 +# initially, secure.example. validates with AD=1 +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.2 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.2 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.2 > /dev/null || ret=1 + +echo_i "killing ns4 with SIGTERM" +cd ns4 +$KILL -TERM `cat named.pid` +rm -f named.pid +cd .. + +echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown" +sleep 4 + +# +# ns4 has now shutdown. add NTA for secure.example. directly into the +# _default.nta file with the forced attribute and some future timestamp. +# +echo "secure.example. forced $future" > ns4/_default.nta +start=`$PERL -e 'print time()."\n";'` + +if + $PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns4 +then + echo_i "restarted server ns4" +else + echo_i "could not restart server ns4" + exit 1 +fi + +# nta-recheck is configured as 7s, but even at t=10 the NTAs for +# secure.example. should not be lifted as it is a forced NTA. +echo_i "waiting till 10s have passed after ns4 was restarted" +$PERL -e 'my $delay = '$start' + 10 - time(); select(undef, undef, undef, $delay) if ($delay > 0);' + +# secure.example. should now return an AD=0 answer (non-authenticated) +# as the NTA is still there. +$DIG $DIGOPTS a.secure.example. a @10.53.0.4 > dig.out.ns4.test$n.3 || ret=1 +grep "status: SERVFAIL" dig.out.ns4.test$n.3 > /dev/null && ret=1 +grep "flags:[^;]* ad[^;]*;" dig.out.ns4.test$n.3 > /dev/null && ret=1 + +# cleanup +$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.4 2>/dev/null + +if [ $ret != 0 ]; then echo_i "failed - NTA persistence: loading forced NTAs failed"; fi +status=`expr $status + $ret` +ret=0 + +# +# check that NTA lifetime read from file is clamped to 1 week. +# +n=`expr $n + 1` +echo_i "testing loading out of bounds lifetime from NTA file ($n)" + +echo_i "killing ns4 with SIGTERM" +cd ns4 +$KILL -TERM `cat named.pid` +rm -f named.pid +cd .. + +echo_i "sleeping for an additional 4 seconds for ns4 to fully shutdown" +sleep 4 + +# +# ns4 has now shutdown. add NTA for secure.example. directly into the +# _default.nta file with a lifetime well into the future. +# +echo "secure.example. forced $future" > ns4/_default.nta +added=`$PERL -e 'print time()."\n";'` + +if + $PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns4 +then + echo_i "restarted server ns4" +else + echo_i "could not restart server ns4" + exit 1 +fi + +echo_i "sleeping for an additional 4 seconds for ns4 to fully startup" +sleep 4 + +# dump the NTA to a file +$RNDCCMD 10.53.0.4 nta -d > rndc.out.ns4.test$n.1 2>/dev/null +lines=`wc -l < rndc.out.ns4.test$n.1` +[ "$lines" -eq 1 ] || ret=1 +ts=`awk '{print $3" "$4}' < rndc.out.ns4.test$n.1` +# rndc nta outputs localtime, so append the timezone +ts_with_zone="$ts `date +%z`" +echo "ts=$ts" > rndc.out.ns4.test$n.2 +echo "ts_with_zone=$ts_with_zone" >> rndc.out.ns4.test$n.2 +echo "added=$added" >> rndc.out.ns4.test$n.2 +if $PERL -e 'use Time::Piece; use Time::Seconds;' 2>/dev/null +then + # ntadiff.pl computes $ts_with_zone - ($added + 1week) + d=`$PERL ./ntadiff.pl "$ts_with_zone" "$added"` + echo "d=$d" >> rndc.out.ns4.test$n.2 + # diff from $added(now) + 1week to the clamped NTA lifetime should be + # less than a few seconds (handle daylight saving changes by adding 3600). + [ $d -lt 3610 ] || ret=1 +else + echo_i "skipped ntadiff test; install PERL module Time::Piece" +fi + +# cleanup +$RNDCCMD 10.53.0.4 nta -remove secure.example > rndc.out.ns4.test$n.3 2>/dev/null + +if [ $ret != 0 ]; then echo_i "failed - NTA lifetime clamping failed"; fi +status=`expr $status + $ret` +ret=0 + +echo_i "completed NTA tests" + +# Run a minimal update test if possible. This is really just +# a regression test for RT #2399; more tests should be added. + +if $PERL -e 'use Net::DNS;' 2>/dev/null +then + echo_i "running DNSSEC update test" + ret=0 + { + $PERL dnssec_update_test.pl -s 10.53.0.3 -p ${PORT} dynamic.example. || ret=1 + } | cat_i + [ $ret -eq 1 ] && status=1 +else + echo_i "The DNSSEC update test requires the Net::DNS library." >&2 +fi + +n=`expr $n + 1` +echo_i "checking managed key maintenance has not started yet ($n)" +ret=0 +[ -f "ns4/managed-keys.bind.jnl" ] && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Reconfigure caching server to use "dnssec-validation auto", and repeat +# some of the DNSSEC validation tests to ensure that it works correctly. +echo_i "switching to automatic root key configuration" +copy_setports ns4/named2.conf.in ns4/named.conf +$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i +sleep 5 + +echo_i "checking managed key maintenance timer has now started ($n)" +ret=0 +[ -f "ns4/managed-keys.bind.jnl" ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking positive validation OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking negative validation ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that root DS queries validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth . @10.53.0.1 ds > dig.out.ns1.test$n || ret=1 +$DIG $DIGOPTS +noauth . @10.53.0.4 ds > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns1.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that DS at a RFC 1918 empty zone lookup succeeds ($n)" +ret=0 +$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.2 >dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth 10.in-addr.arpa ds @10.53.0.6 >dig.out.ns6.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns6.test$n || ret=1 +grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking expired signatures remain with "'"allow-update { none; };"'" and no keys available ($n)" +ret=0 +$DIG $DIGOPTS +noauth expired.example. +dnssec @10.53.0.3 soa > dig.out.ns3.test$n || ret=1 +grep "RRSIG.SOA" dig.out.ns3.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi + +status=`expr $status + $ret` +echo_i "checking expired signatures do not validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth expired.example. +dnssec @10.53.0.4 soa > dig.out.ns4.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +grep "expired.example/.*: RRSIG has expired" ns4/named.run > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that the NSEC3 record for the apex is properly signed when a DNSKEY is added via UPDATE ($n)" +ret=0 +( +cd ns3 +kskname=`$KEYGEN -q -3 -r $RANDFILE -fk update-nsec3.example` +( +echo zone update-nsec3.example +echo server 10.53.0.3 ${PORT} +grep DNSKEY ${kskname}.key | sed -e 's/^/update add /' -e 's/IN/300 IN/' +echo send +) | $NSUPDATE +) +$DIG $DIGOPTS +dnssec a update-nsec3.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +grep "NSEC3 .* TYPE65534" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that the NSEC record is properly generated when DNSKEY are added via auto-dnssec ($n)" +ret=0 +$DIG $DIGOPTS +dnssec a auto-nsec.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +grep "IN.NSEC[^3].* DNSKEY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that the NSEC3 record is properly generated when DNSKEY are added via auto-dnssec ($n)" +ret=0 +$DIG $DIGOPTS +dnssec a auto-nsec3.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +grep "IN.NSEC3 .* DNSKEY" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that signing records have been marked as complete ($n)" +ret=0 +checkprivate dynamic.example 10.53.0.3 || ret=1 +checkprivate update-nsec3.example 10.53.0.3 || ret=1 +checkprivate auto-nsec3.example 10.53.0.3 || ret=1 +checkprivate expiring.example 10.53.0.3 || ret=1 +checkprivate auto-nsec.example 10.53.0.3 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing' without arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -list' without zone is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -list > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -clear' without additional arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -clear > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -clear all' without zone is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -clear all > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param' without additional arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param none' without zone is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param none > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param 1' without additional arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param 1 0' without additional arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param 1 0 0' without additional arguments is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param 1 0 0 -' without zone is handled ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - > /dev/null 2>&1 && ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param' works with salt ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 ffff inline.example > /dev/null 2>&1 || ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +for i in 1 2 3 4 5 6 7 8 9 10 ; do + salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'` + if [ "$salt" = "FFFF" ]; then + break; + fi + echo_i "sleeping ...." + sleep 1 +done; +[ "$salt" = "FFFF" ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param' works without salt ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - inline.example > /dev/null 2>&1 || ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +for i in 1 2 3 4 5 6 7 8 9 10 ; do + salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'` + if [ "$salt" = "-" ]; then + break; + fi + echo_i "sleeping ...." + sleep 1 +done; +[ "$salt" = "-" ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param' works with 'auto' as salt ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 auto inline.example > /dev/null 2>&1 || ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +for i in 1 2 3 4 5 6 7 8 9 10 ; do + salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'` + [ -n "$salt" -a "$salt" != "-" ] && break + echo_i "sleeping ...." + sleep 1 +done; +[ "$salt" != "-" ] || ret=1 +[ `expr "${salt}" : ".*"` -eq 16 ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'rndc signing -nsec3param' with 'auto' as salt again generates a different salt ($n)" +ret=0 +oldsalt=$salt +$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 auto inline.example > /dev/null 2>&1 || ret=1 +$RNDCCMD 10.53.0.3 status > /dev/null || ret=1 +for i in 1 2 3 4 5 6 7 8 9 10 ; do + salt=`$DIG $DIGOPTS +nodnssec +short nsec3param inline.example. @10.53.0.3 | awk '{print $4}'` + [ -n "$salt" -a "$salt" != "$oldsalt" ] && break + echo_i "sleeping ...." + sleep 1 +done; +[ "$salt" != "$oldsalt" ] || ret=1 +[ `expr "$salt" : ".*"` -eq 16 ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check rndc signing -list output ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -list dynamic.example 2>&1 > signing.out +grep "No signing records found" signing.out > /dev/null 2>&1 || { + ret=1 + sed 's/^/ns3 /' signing.out | cat_i +} +$RNDCCMD 10.53.0.3 signing -list update-nsec3.example 2>&1 > signing.out +grep "Done signing with key .*/NSEC3RSASHA1" signing.out > /dev/null 2>&1 || { + ret=1 + sed 's/^/ns3 /' signing.out | cat_i +} +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "clear signing records ($n)" +$RNDCCMD 10.53.0.3 signing -clear all update-nsec3.example > /dev/null || ret=1 +sleep 1 +$RNDCCMD 10.53.0.3 signing -list update-nsec3.example 2>&1 > signing.out +grep "No signing records found" signing.out > /dev/null 2>&1 || { + ret=1 + sed 's/^/ns3 /' signing.out | cat_i +} +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that a insecure zone beneath a cname resolves ($n)" +ret=0 +$DIG $DIGOPTS soa insecure.below-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that a secure zone beneath a cname resolves ($n)" +ret=0 +$DIG $DIGOPTS soa secure.below-cname.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking dnskey query with no data still gets put in cache ($n)" +ret=0 +myDIGOPTS="+noadd +nosea +nostat +noquest +nocomm +nocmd -p ${PORT} @10.53.0.4" +firstVal=`$DIG $myDIGOPTS insecure.example. dnskey| awk '$1 != ";;" { print $2 }'` +sleep 1 +secondVal=`$DIG $myDIGOPTS insecure.example. dnskey| awk '$1 != ";;" { print $2 }'` +if [ ${firstVal:-0} -eq ${secondVal:-0} ] +then + sleep 1 + thirdVal=`$DIG $myDIGOPTS insecure.example. dnskey|awk '$1 != ";;" { print $2 }'` + if [ ${firstVal:-0} -eq ${thirdVal:-0} ] + then + echo_i "cannot confirm query answer still in cache" + ret=1 + fi +fi +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a split dnssec dnssec-signzone work ($n)" +ret=0 +$DIG $DIGOPTS soa split-dnssec.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a smart split dnssec dnssec-signzone work ($n)" +ret=0 +$DIG $DIGOPTS soa split-smart.example. @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 2," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.* ad[ ;]" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that NOTIFY is sent at the end of NSEC3 chain generation ($n)" +ret=0 +( +echo zone nsec3chain-test +echo server 10.53.0.2 ${PORT} +echo update add nsec3chain-test. 0 nsec3param 1 0 1 123456 +echo send +) | $NSUPDATE +for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 +do + $DIG $DIGOPTS nsec3param nsec3chain-test @10.53.0.2 > dig.out.ns2.test$n || ret=1 + if grep "ANSWER: 3," dig.out.ns2.test$n >/dev/null + then + break; + fi + echo_i "sleeping ...." + sleep 3 +done; +grep "ANSWER: 3," dig.out.ns2.test$n > /dev/null || ret=1 +if [ $ret != 0 ]; then echo_i "nsec3 chain generation not complete"; fi +$DIG $DIGOPTS +noauth +nodnssec soa nsec3chain-test @10.53.0.2 > dig.out.ns2.test$n || ret=1 +s2=`awk '$4 == "SOA" { print $7}' dig.out.ns2.test$n` +for i in 1 2 3 4 5 6 7 8 9 10 +do + $DIG $DIGOPTS +noauth +nodnssec soa nsec3chain-test @10.53.0.3 > dig.out.ns3.test$n || ret=1 + s3=`awk '$4 == "SOA" { print $7}' dig.out.ns3.test$n` + test "$s2" = "$s3" && break + sleep 1 +done +digcomp dig.out.ns2.test$n dig.out.ns3.test$n || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check dnssec-dsfromkey from stdin ($n)" +ret=0 +$DIG $DIGOPTS dnskey algroll. @10.53.0.2 | \ + $DSFROMKEY -f - algroll. > dig.out.ns2.test$n || ret=1 +NF=`awk '{print NF}' dig.out.ns2.test$n | sort -u` +[ "${NF}" = 7 ] || ret=1 +# make canonical +awk '{ + for (i=1;i<7;i++) printf("%s ", $i); + for (i=7;i<=NF;i++) printf("%s", $i); + printf("\n"); +}' < dig.out.ns2.test$n > canonical1.$n || ret=1 +awk '{ + for (i=1;i<7;i++) printf("%s ", $i); + for (i=7;i<=NF;i++) printf("%s", $i); + printf("\n"); +}' < ns1/dsset-algroll$TP > canonical2.$n || ret=1 +diff -b canonical1.$n canonical2.$n > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# Intentionally strip ".key" from keyfile name to ensure the error message +# includes it anyway to avoid confusion (RT #21731) +echo_i "check dnssec-dsfromkey error message when keyfile is not found ($n)" +ret=0 +key=`$KEYGEN -q -r $RANDFILE example.` || ret=1 +mv $key.key $key +$DSFROMKEY $key > dsfromkey.out.$n 2>&1 && ret=1 +grep "$key.key: file not found" dsfromkey.out.$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing soon-to-expire RRSIGs without a replacement private key ($n)" +ret=0 +$DIG $ANSWEROPTS +nottlid expiring.example ns @10.53.0.3 | grep RRSIG > dig.out.ns3.test$n 2>&1 +# there must be a signature here +[ -s dig.out.ns3.test$n ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing new records are signed with 'no-resign' ($n)" +ret=0 +( +echo zone nosign.example +echo server 10.53.0.3 ${PORT} +echo update add new.nosign.example 300 in txt "hi there" +echo send +) | $NSUPDATE +sleep 1 +$DIG $ANSWEROPTS +nottlid txt new.nosign.example @10.53.0.3 \ + > dig.out.ns3.test$n 2>&1 +grep RRSIG dig.out.ns3.test$n > /dev/null 2>&1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing expiring records aren't resigned with 'no-resign' ($n)" +ret=0 +$DIG $ANSWEROPTS +nottlid nosign.example ns @10.53.0.3 | \ + grep RRSIG | sed 's/[ ][ ]*/ /g' > dig.out.ns3.test$n 2>&1 +# the NS RRSIG should not be changed +cmp -s nosign.before dig.out.ns3.test$n || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing updates fail with no private key ($n)" +ret=0 +rm -f ns3/Knosign.example.*.private +( +echo zone nosign.example +echo server 10.53.0.3 ${PORT} +echo update add fail.nosign.example 300 in txt "reject me" +echo send +) | $NSUPDATE > /dev/null 2>&1 && ret=1 +$DIG $ANSWEROPTS +nottlid fail.nosign.example txt @10.53.0.3 \ + > dig.out.ns3.test$n 2>&1 +[ -s dig.out.ns3.test$n ] && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing legacy upper case signer name validation ($n)" +ret=0 +$DIG +tcp +noadd +noauth +dnssec -p ${PORT} soa upper.example @10.53.0.4 \ + > dig.out.ns4.test$n 2>&1 +grep 'flags:.* ad;' dig.out.ns4.test$n > /dev/null || ret=1 +grep 'RRSIG.*SOA.* UPPER\.EXAMPLE\. ' dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing that we lower case signer name ($n)" +ret=0 +$DIG +tcp +noadd +noauth +dnssec -p ${PORT} soa LOWER.EXAMPLE @10.53.0.4 \ + > dig.out.ns4.test$n 2>&1 +grep 'flags:.* ad;' dig.out.ns4.test$n > /dev/null || ret=1 +grep 'RRSIG.*SOA.* lower\.example\. ' dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing TTL is capped at RRSIG expiry time ($n)" +ret=0 +$RNDCCMD 10.53.0.3 freeze expiring.example 2>&1 | sed 's/^/ns3 /' | cat_i +( +cd ns3 +for file in K*.moved; do + mv $file `basename $file .moved` +done +$SIGNER -S -r $RANDFILE -N increment -e now+1mi -o expiring.example expiring.example.db > /dev/null 2>&1 +) || ret=1 +$RNDCCMD 10.53.0.3 reload expiring.example 2>&1 | sed 's/^/ns3 /' | cat_i + +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +$DIG $ANSWEROPTS +cd expiring.example soa @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ANSWEROPTS expiring.example soa @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-0}; do + [ ${ttl:-0} -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ ${ttl:-0} -le 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section (NS) ($n)" +ret=0 +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +sleep 1 +$DIG $ADDITIONALOPTS +cd expiring.example ns @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ADDITIONALOPTS expiring.example ns @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-300}; do + [ ${ttl:-0} -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ ${ttl:-0} -le 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section (MX) ($n)" +ret=0 +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +sleep 1 +$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-300}; do + [ ${ttl:-0} -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ ${ttl:-0} -le 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +copy_setports ns4/named3.conf.in ns4/named.conf +$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/ns4 /' | cat_i +sleep 3 + +echo_i "testing TTL of about to expire RRsets with dnssec-accept-expired yes; ($n)" +ret=0 +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +$DIG $ANSWEROPTS +cd expiring.example soa @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ANSWEROPTS expiring.example soa @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-0}; do + [ $ttl -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ $ttl -le 120 -a $ttl -gt 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing TTL of expired RRsets with dnssec-accept-expired yes; ($n)" +ret=0 +$DIG $ANSWEROPTS +cd expired.example soa @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ANSWEROPTS expired.example soa @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-0}; do + [ $ttl -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ $ttl -le 120 -a $ttl -gt 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +copy_setports ns4/named4.conf.in ns4/named.conf +$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/I:ns4 /' +sleep 3 + +echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section with dnssec-accept-expired yes; ($n)" +ret=0 +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-300}; do + [ $ttl -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ $ttl -le 120 -a $ttl -gt 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing TTL is capped at RRSIG expiry time for records in the additional section with acache off; ($n)" +ret=0 +$RNDCCMD 10.53.0.4 flush 2>&1 | sed 's/^/ns4 /' | cat_i +$DIG $ADDITIONALOPTS +cd expiring.example mx @10.53.0.4 > dig.out.ns4.1.$n +$DIG $ADDITIONALOPTS expiring.example mx @10.53.0.4 > dig.out.ns4.2.$n +ttls=`awk '$1 != ";;" {print $2}' dig.out.ns4.1.$n` +ttls2=`awk '$1 != ";;" {print $2}' dig.out.ns4.2.$n` +for ttl in ${ttls:-300}; do + [ $ttl -eq 300 ] || ret=1 +done +for ttl in ${ttls2:-0}; do + [ $ttl -le 120 -a $ttl -gt 60 ] || ret=1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing DNSKEY lookup via CNAME ($n)" +ret=0 +$DIG $DIGOPTS +noauth cnameandkey.secure.example. \ + @10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth cnameandkey.secure.example. \ + @10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing KEY lookup at CNAME (present) ($n)" +ret=0 +$DIG $DIGOPTS +noauth cnameandkey.secure.example. \ + @10.53.0.3 key > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth cnameandkey.secure.example. \ + @10.53.0.4 key > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing KEY lookup at CNAME (not present) ($n)" +ret=0 +$DIG $DIGOPTS +noauth cnamenokey.secure.example. \ + @10.53.0.3 key > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth cnamenokey.secure.example. \ + @10.53.0.4 key > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "CNAME" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing DNSKEY lookup via DNAME ($n)" +ret=0 +$DIG $DIGOPTS a.dnameandkey.secure.example. \ + @10.53.0.3 dnskey > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS a.dnameandkey.secure.example. \ + @10.53.0.4 dnskey > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "CNAME" dig.out.ns4.test$n > /dev/null || ret=1 +grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "testing KEY lookup via DNAME ($n)" +ret=0 +$DIG $DIGOPTS b.dnameandkey.secure.example. \ + @10.53.0.3 key > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS b.dnameandkey.secure.example. \ + @10.53.0.4 key > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "DNAME" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that named doesn't loop when all private keys are not available ($n)" +ret=0 +lines=`grep "reading private key file expiring.example" ns3/named.run | wc -l` +test ${lines:-1000} -lt 15 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check against against missing nearest provable proof ($n)" +$DIG $DIGOPTS +norec b.c.d.optout-tld. \ + @10.53.0.6 ds > dig.out.ds.ns6.test$n || ret=1 +nsec3=`grep "IN.NSEC3" dig.out.ds.ns6.test$n | wc -l` +[ $nsec3 -eq 2 ] || ret=1 +$DIG $DIGOPTS +norec b.c.d.optout-tld. \ + @10.53.0.6 A > dig.out.ns6.test$n || ret=1 +nsec3=`grep "IN.NSEC3" dig.out.ns6.test$n | wc -l` +[ $nsec3 -eq 1 ] || ret=1 +$DIG $DIGOPTS optout-tld. \ + @10.53.0.4 SOA > dig.out.soa.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.soa.ns4.test$n > /dev/null || ret=1 +$DIG $DIGOPTS b.c.d.optout-tld. \ + @10.53.0.4 A > dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that key id are logged when dumping the cache ($n)" +ret=0 +$RNDCCMD 10.53.0.4 dumpdb 2>&1 | sed 's/^/ns4 /' | cat_i +sleep 1 +grep "; key id = " ns4/named_dump.db > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check KEYDATA records are printed in human readable form in key zone ($n)" +# force the managed-keys zone to be written out +$RNDCCMD 10.53.0.4 managed-keys sync 2>&1 | sed 's/^/ns4 /' | cat_i +for i in 1 2 3 4 5 6 7 8 9 +do + ret=0 + if test -f ns4/managed-keys.bind + then + grep KEYDATA ns4/managed-keys.bind > /dev/null && + grep "next refresh:" ns4/managed-keys.bind > /dev/null && + break + fi + ret=1 + sleep 1 +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check dig's +nocrypto flag ($n)" +ret=0 +$DIG $DIGOPTS +norec +nocrypto DNSKEY . \ + @10.53.0.1 > dig.out.dnskey.ns1.test$n || ret=1 +grep '256 3 1 \[key id = [1-9][0-9]*]' dig.out.dnskey.ns1.test$n > /dev/null || ret=1 +grep 'RRSIG.* \[omitted]' dig.out.dnskey.ns1.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +norec +nocrypto DS example \ + @10.53.0.1 > dig.out.ds.ns1.test$n || ret=1 +grep 'DS.* 3 [12] \[omitted]' dig.out.ds.ns1.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check simultaneous inactivation and publishing of dnskeys removes inactive signature ($n)" +ret=0 +cnt=0 +while : +do +$DIG $DIGOPTS publish-inactive.example @10.53.0.3 dnskey > dig.out.ns3.test$n +keys=`awk '$5 == 257 { print; }' dig.out.ns3.test$n | wc -l` +test $keys -gt 2 && break +cnt=`expr $cnt + 1` +test $cnt -gt 120 && break +sleep 1 +done +test $keys -gt 2 || ret=1 +sigs=`grep RRSIG dig.out.ns3.test$n | wc -l` +sigs=`expr $sigs + 0` +n=`expr $n + 1` +test $sigs -eq 2 || ret=1 +if test $ret != 0 ; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that increasing the sig-validity-interval resigning triggers re-signing" +ret=0 +before=`$DIG axfr siginterval.example -p ${PORT} @10.53.0.3 | grep RRSIG.SOA` +cp ns3/siginterval2.conf ns3/siginterval.conf +$RNDCCMD 10.53.0.3 reconfig 2>&1 | sed 's/^/ns3 /' | cat_i +for i in 1 2 3 4 5 6 7 8 9 0 +do +after=`$DIG axfr siginterval.example -p ${PORT} @10.53.0.3 | grep RRSIG.SOA` +test "$before" != "$after" && break +sleep 1 +done +n=`expr $n + 1` +if test "$before" = "$after" ; then echo_i "failed"; ret=1; fi +status=`expr $status + $ret` + +copy_setports ns4/named4.conf.in ns4/named.conf +$RNDCCMD 10.53.0.4 reconfig 2>&1 | sed 's/^/I:ns4 /' +sleep 3 + +echo_i "check insecure delegation between static-stub zones ($n)" +ret=0 +$DIG $DIGOPTS ns insecure.secure.example \ + @10.53.0.4 > dig.out.ns4.1.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.1.test$n > /dev/null && ret=1 +$DIG $DIGOPTS ns secure.example \ + @10.53.0.4 > dig.out.ns4.2.test$n || ret=1 +grep "SERVFAIL" dig.out.ns4.2.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check the acceptance of seconds as inception and expiration times ($n)" +ret=0 +in="NSEC 8 0 86400 1390003200 1389394800 33655 . NYWjZYBV1b+h4j0yu/SmPOOylR8P4IXKDzHX3NwEmU1SUp27aJ91dP+i+UBcnPmBib0hck4DrFVvpflCEpCnVQd2DexcN0GX+3PM7XobxhtDlmnU X1L47zJlbdHNwTqHuPaMM6Xy9HGMXps7O5JVyfggVhTz2C+G5OVxBdb2rOo=" + +exp="NSEC 8 0 86400 20140118000000 20140110230000 33655 . NYWjZYBV1b+h4j0yu/SmPOOylR8P4IXKDzHX3NwEmU1SUp27aJ91dP+i +UBcnPmBib0hck4DrFVvpflCEpCnVQd2DexcN0GX+3PM7XobxhtDlmnU X1L47zJlbdHNwTqHuPaMM6Xy9HGMXps7O5JVyfggVhTz2C+G5OVxBdb2 rOo=" + +out=`echo "IN RRSIG $in" | $RRCHECKER -p | sed 's/^IN.RRSIG.//'` +[ "$out" = "$exp" ] || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check the correct resigning time is reported in zonestatus ($n)" +ret=0 +$RNDCCMD 10.53.0.3 \ + zonestatus secure.example > rndc.out.ns3.test$n +# next resign node: secure.example/DNSKEY +name=`awk '/next resign node:/ { print $4 }' rndc.out.ns3.test$n | sed 's;/; ;'` +# next resign time: Thu, 24 Apr 2014 10:38:16 GMT +time=`awk 'BEGIN { m["Jan"] = "01"; m["Feb"] = "02"; m["Mar"] = "03"; + m["Apr"] = "04"; m["May"] = "05"; m["Jun"] = "06"; + m["Jul"] = "07"; m["Aug"] = "08"; m["Sep"] = "09"; + m["Oct"] = "10"; m["Nov"] = "11"; m["Dec"] = "12";} + /next resign time:/ { printf "%d%s%02d%s\n", $7, m[$6], $5, $8 }' rndc.out.ns3.test$n | sed 's/://g'` +$DIG $DIGOPTS +noall +answer $name @10.53.0.3 > dig.out.test$n +expire=`awk '$4 == "RRSIG" { print $9 }' dig.out.test$n` +inception=`awk '$4 == "RRSIG" { print $10 }' dig.out.test$n` +$PERL -e 'exit(0) if ("'"$time"'" lt "'"$expire"'" && "'"$time"'" gt "'"$inception"'"); exit(1);' || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that split rrsigs are handled ($n)" +ret=0 +$DIG $DIGOPTS split-rrsig soa @10.53.0.7 > dig.out.test$n || ret=1 +awk 'BEGIN { ok=0; } $4 == "SOA" { if ($7 > 1) ok=1; } END { if (!ok) exit(1); }' dig.out.test$n || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that 'dnssec-keygen -S' works for all supported algorithms ($n)" +ret=0 +alg=1 +until test $alg = 256 +do + size= + case $alg in + 1) size="-b 512";; + 2) # Diffie Helman + alg=`expr $alg + 1` + continue;; + 3) size="-b 512";; + 5) size="-b 512";; + 6) size="-b 512";; + 7) size="-b 512";; + 8) size="-b 512";; + 10) size="-b 1024";; + 157|160|161|162|163|164|165) # private - non standard + alg=`expr $alg + 1` + continue;; + esac + key1=`$KEYGEN -a $alg $size -n zone -r $RANDFILE example 2> keygen.err` + if grep "unsupported algorithm" keygen.err > /dev/null + then + alg=`expr $alg + 1` + continue + fi + if test -z "$key1" + then + echo_i "'$KEYGEN -a $alg': failed" + cat keygen.err + ret=1 + alg=`expr $alg + 1` + continue + fi + $SETTIME -I now+4d $key1.private > /dev/null + key2=`$KEYGEN -v 10 -r $RANDFILE -i 3d -S $key1.private 2> /dev/null` + test -f $key2.key -a -f $key2.private || { + ret=1 + echo_i "'dnssec-keygen -S' failed for algorithm: $alg" + } + alg=`expr $alg + 1` +done +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDS records are signed using KSK by dnssec-signzone ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +# +# Test for +sigchase with a null set of trusted keys. +# +$DIG $DIGOPTS @10.53.0.3 +sigchase +trusted-key=/dev/null > dig.out.ns3.test$n 2>&1 +if grep "Invalid option: +sigchase" dig.out.ns3.test$n > /dev/null +then + echo_i "Skipping 'dig +sigchase' tests" + n=`expr $n + 1` +else + echo_i "checking that 'dig +sigchase' doesn't loop with future inception ($n)" + ret=0 + $DIG $DIGOPTS @10.53.0.3 dnskey future.example +sigchase \ + +trusted-key=ns3/trusted-future.key > dig.out.ns3.test$n & + pid=$! + sleep 1 + $KILL -9 $pid 2> /dev/null + wait $pid + grep ";; No DNSKEY is valid to check the RRSIG of the RRset: FAILED" dig.out.ns3.test$n > /dev/null || ret=1 + if [ $ret != 0 ]; then echo_i "failed"; fi + status=`expr $status + $ret` + n=`expr $n + 1` +fi + +echo_i "checking that positive unknown NSEC3 hash algorithm does validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 nsec3-unknown.example SOA > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 nsec3-unknown.example SOA > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDS records are signed using KSK by with dnssec-auto ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-auto.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a lone non matching CDS record is rejected ($n)" +ret=0 +( +echo zone cds-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cds-update.secure CDS +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure | +grep "DNSKEY.257" | sed 's/DNSKEY.257/DNSKEY 258/' | +$DSFROMKEY -C -A -f - -T 1 cds-update.secure | +sed "s/^/update add /" +echo send +) | $NSUPDATE > nsupdate.out.test$n 2>&1 +grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n +lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-10} -eq 0 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDS records are signed using KSK when added by nsupdate ($n)" +ret=0 +( +echo zone cds-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cds-update.secure CDS +echo send +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure | +grep "DNSKEY.257" | +$DSFROMKEY -C -f - -T 1 cds-update.secure | +sed "s/^/update add /" +echo send +) | $NSUPDATE +$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that positive unknown NSEC3 hash algorithm with OPTOUT does validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 optout-unknown.example SOA > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 optout-unknown.example SOA > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a non matching CDS record is accepted with a matching CDS record ($n)" +ret=0 +( +echo zone cds-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cds-update.secure CDS +echo send +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure | +grep "DNSKEY.257" | +$DSFROMKEY -C -f - -T 1 cds-update.secure | +sed "s/^/update add /" +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cds-update.secure | +grep "DNSKEY.257" | sed 's/DNSKEY.257/DNSKEY 258/' | +$DSFROMKEY -C -A -f - -T 1 cds-update.secure | +sed "s/^/update add /" +echo send +) | $NSUPDATE +$DIG $DIGOPTS +noall +answer @10.53.0.2 cds cds-update.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +lines=`awk '$4 == "CDS" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 4 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that negative unknown NSEC3 hash algorithm does not validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 nsec3-unknown.example A > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 nsec3-unknown.example A > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: SERVFAIL," dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDNSKEY records are signed using KSK by dnssec-signzone ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that negative unknown NSEC3 hash algorithm with OPTOUT does not validate ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 optout-unknown.example A > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 optout-unknown.example A > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: SERVFAIL," dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDNSKEY records are signed using KSK by with dnssec-auto ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-auto.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that unknown DNSKEY algorithm validates as insecure ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-unknown.example A > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 dnskey-unknown.example A > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a lone non matching CDNSKEY record is rejected ($n)" +ret=0 +( +echo zone cdnskey-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cdnskey-update.secure CDNSKEY +echo send +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure | +sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 258/p' +echo send +) | $NSUPDATE > nsupdate.out.test$n 2>&1 +grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n +lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-10} -eq 0 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking that unknown DNSKEY algorithm + unknown NSEC3 has algorithm validates as insecure ($n)" +ret=0 +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.3 dnskey-nsec3-unknown.example A > dig.out.ns3.test$n +$DIG $DIGOPTS +noauth +noadd +nodnssec +adflag @10.53.0.4 dnskey-nsec3-unknown.example A > dig.out.ns4.test$n +grep "status: NOERROR," dig.out.ns3.test$n > /dev/null || ret=1 +grep "status: NOERROR," dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that CDNSKEY records are signed using KSK when added by nsupdate ($n)" +ret=0 +( +echo zone cdnskey-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cdnskey-update.secure CDNSKEY +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure | +sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 257/p' +echo send +) | $NSUPDATE +$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 1 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "checking initialization with a revoked managed key ($n)" +ret=0 +copy_setports ns5/named2.conf.in ns5/named.conf +$RNDCCMD 10.53.0.5 reconfig 2>&1 | sed 's/^/ns5 /' | cat_i +sleep 3 +$DIG $DIGOPTS +dnssec @10.53.0.5 SOA . > dig.out.ns5.test$n +grep "status: SERVFAIL" dig.out.ns5.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a non matching CDNSKEY record is accepted with a matching CDNSKEY record ($n)" +ret=0 +( +echo zone cdnskey-update.secure +echo server 10.53.0.2 ${PORT} +echo update delete cdnskey-update.secure CDNSKEY +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure | +sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 257/p' +$DIG $DIGOPTS +noall +answer @10.53.0.2 dnskey cdnskey-update.secure | +sed -n -e "s/^/update add /" -e 's/DNSKEY.257/CDNSKEY 258/p' +echo send +) | $NSUPDATE +$DIG $DIGOPTS +noall +answer @10.53.0.2 cdnskey cdnskey-update.secure > dig.out.test$n +lines=`awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +lines=`awk '$4 == "CDNSKEY" {print}' dig.out.test$n | wc -l` +test ${lines:-0} -eq 2 || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that RRSIGs are correctly removed from apex when RRset is removed NSEC ($n)" +ret=0 +# generate signed zone with MX and AAAA records at apex. +( +cd signer +$KEYGEN -q -r $RANDFILE -3 -fK remove > /dev/null +$KEYGEN -q -r $RANDFILE -3 remove > /dev/null +echo > remove.db.signed +$SIGNER -S -o remove -D -f remove.db.signed remove.db.in > signer.out.1.$n 2>&1 +) +grep "RRSIG MX" signer/remove.db.signed > /dev/null || { + ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.pre$n; +} +# re-generate signed zone without MX and AAAA records at apex. +( +cd signer +$SIGNER -S -o remove -D -f remove.db.signed remove2.db.in > signer.out.2.$n 2>&1 +) +grep "RRSIG MX" signer/remove.db.signed > /dev/null && { + ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.post$n; +} +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that RRSIGs are correctly removed from apex when RRset is removed NSEC3 ($n)" +ret=0 +# generate signed zone with MX and AAAA records at apex. +( +cd signer +echo > remove.db.signed +$SIGNER -3 - -S -o remove -D -f remove.db.signed remove.db.in > signer.out.1.$n 2>&1 +) +grep "RRSIG MX" signer/remove.db.signed > /dev/null || { + ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.pre$n; +} +# re-generate signed zone without MX and AAAA records at apex. +( +cd signer +$SIGNER -3 - -S -o remove -D -f remove.db.signed remove2.db.in > signer.out.2.$n 2>&1 +) +grep "RRSIG MX" signer/remove.db.signed > /dev/null && { + ret=1 ; cp signer/remove.db.signed signer/remove.db.signed.post$n; +} +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that a named managed zone that was signed 'in-the-future' is re-signed when loaded ($n)" +ret=0 +$DIG $DIGOPTS managed-future.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that trust-anchor-telemetry queries are logged ($n)" +ret=0 +grep "sending trust-anchor-telemetry query '_ta-[0-9a-f]*/NULL" ns6/named.run > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that _ta-XXXX trust-anchor-telemetry queries are logged ($n)" +ret=0 +grep "trust-anchor-telemetry '_ta-[0-9a-f]*/IN' from" ns1/named.run > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that _ta-AAAA trust-anchor-telemetry are not sent when disabled ($n)" +ret=0 +grep "sending trust-anchor-telemetry query '_ta-[0-9a-f]*/IN" ns1/named.run > /dev/null && ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that KEY-TAG trust-anchor-telemetry queries are logged ($n)" +ret=0 +$DIG $DIGOPTS . dnskey +ednsopt=KEY-TAG:ffff @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep "trust-anchor-telemetry './IN' from .* 65535" ns1/named.run > /dev/null || ret=1 +n=`expr $n + 1` +if [ $ret != 0 ]; then echo_i "failed"; fi +status=`expr $status + $ret` + +echo_i "check that multiple KEY-TAG trust-anchor-telemetry options don't leak memory ($n)" +ret=0 +$DIG $DIGOPTS . dnskey +ednsopt=KEY-TAG:fffe +ednsopt=KEY-TAG:fffd @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep "trust-anchor-telemetry './IN' from .* 65534" ns1/named.run > /dev/null || ret=1 +grep "trust-anchor-telemetry './IN' from .* 65533" ns1/named.run > /dev/null && ret=1 +$PERL $SYSTEMTESTTOP/stop.pl . ns1 || ret=1 +$PERL $SYSTEMTESTTOP/start.pl --noclean --restart --port ${PORT} . ns1 || ret=1 +n=$(($n+1)) +test "$ret" -eq 0 || echo_i "failed" +status=$((status+ret)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 |