diff options
Diffstat (limited to 'FAQ')
| -rw-r--r-- | FAQ | 541 |
1 files changed, 541 insertions, 0 deletions
@@ -0,0 +1,541 @@ +Frequently Asked Questions + +Table of Contents + + o 1. chrony compared to other programs + ? 1.1. How does chrony compare to ntpd? + o 2. Configuration issues + ? 2.1. What is the minimum recommended configuration for an NTP client? + ? 2.2. How do I make an NTP server from an NTP client? + ? 2.3. I have several computers on a LAN. Should be all clients of an + external server? + ? 2.4. Must I specify servers by IP address if DNS is not available on + chronyd start? + ? 2.5. How can I make chronyd more secure? + ? 2.6. How can I improve the accuracy of the system clock with NTP + sources? + ? 2.7. Does chronyd have an ntpdate mode? + ? 2.8. Can chronyd be configured to control the clock like ntpd? + ? 2.9. What happened to the commandkey and generatecommandkey directives? + o 3. Computer is not synchronising + ? 3.1. Behind a firewall? + ? 3.2. Are NTP servers specified with the offline option? + ? 3.3. Is chronyd allowed to step the system clock? + ? 3.4. Using a Windows NTP server? + ? 3.5. Using a PPS reference clock? + o 4. Issues with chronyc + ? 4.1. I keep getting the error 506 Cannot talk to daemon + ? 4.2. I keep getting the error 501 Not authorised + ? 4.3. Why does chronyc tracking always print an IPv4 address as + reference ID? + ? 4.4. Is the chronyc / chronyd protocol documented anywhere? + o 5. Real-time clock issues + ? 5.1. What is the real-time clock (RTC)? + ? 5.2. I want to use chronyd's RTC support. Must I disable hwclock? + ? 5.3. I just keep getting the 513 RTC driver not running message + ? 5.4. I get Could not open /dev/rtc, Device or resource busy in my + syslog file + ? 5.5. What if my computer does not have an RTC or backup battery? + o 6. NTP-specific issues + ? 6.1. Can chronyd be driven from broadcast/multicast NTP servers? + ? 6.2. Can chronyd transmit broadcast NTP packets? + ? 6.3. Can chronyd keep the system clock a fixed offset away from real + time? + ? 6.4. What happens if the network connection is dropped without using + chronyc's offline command first? + o 7. Operating systems + ? 7.1. Does chrony support Windows? + ? 7.2. Are there any plans to support Windows? + +1. chrony compared to other programs + +1.1. How does chrony compare to ntpd? + +chronyd was designed to work well in a wide range of conditions and it can +usually synchronise the system clock faster and with better time accuracy. It +doesn't implement some of the less useful NTP modes like broadcast client or +multicast server/client. + +If your computer is connected to the Internet only for few minutes at a time, +the network connection is often congested, you turn your computer off or +suspend it frequently, the clock is not very stable (e.g. there are rapid +changes in the temperature or it's a virtual machine), or you want to use NTP +on an isolated network with no hardware reference clocks in sight, chrony will +probably work much better for you. + +For a more detailed comparison of features and performance, see the comparison +page on the chrony website. + +2. Configuration issues + +2.1. What is the minimum recommended configuration for an NTP client? + +First, the client needs to know which NTP servers it should ask for the current +time. They are specified by the server or pool directive. The pool directive +can be used for names that resolve to multiple addresses. For good reliability +the client should have at least three servers. The iburst option speeds up the +initial synchronisation. + +To stabilise the initial synchronisation on the next start, the estimated drift +of the system clock is saved to a file specified by the driftfile directive. + +If the system clock can be far from the true time after boot for any reason, +chronyd should be allowed to correct it quickly by stepping instead of slewing, +which would take a very long time. The makestep directive does that. + +In order to keep the real-time clock (RTC) close to the true time, so the +system time is reasonably close to the true time when it's initialised on the +next boot from the RTC, the rtcsync directive enables a mode in which the +system time is periodically copied to the RTC. It is supported on Linux and +macOS. + +If you want to use public NTP servers from the pool.ntp.org project, the +minimal chrony.conf file could be: + +pool pool.ntp.org iburst +driftfile /var/lib/chrony/drift +makestep 1 3 +rtcsync + +2.2. How do I make an NTP server from an NTP client? + +You need to add an allow directive to the chrony.conf file in order to open the +NTP port and allow chronyd to reply to client requests. allow with no specified +subnet allows access from all IPv4 and IPv6 addresses. + +2.3. I have several computers on a LAN. Should be all clients of an external +server? + +The best configuration is usually to make one computer the server, with the +others as clients of it. Add a local directive to the server's chrony.conf +file. This configuration will be better because + + o the load on the external connection is less + + o the load on the external NTP server(s) is less + + o if your external connection goes down, the computers on the LAN will + maintain a common time with each other. + +2.4. Must I specify servers by IP address if DNS is not available on chronyd +start? + +No. Starting from version 1.25, chronyd will keep trying to resolve the names +specified by the server, pool, and peer directives in an increasing interval +until it succeeds. The online command can be issued from chronyc to force +chronyd to try to resolve the names immediately. + +2.5. How can I make chronyd more secure? + +If you don't need to serve time to NTP clients or peers, you can add port 0 to +the chrony.conf file to completely disable the NTP server functionality and +prevent NTP requests from reaching chronyd. Starting from version 2.0, the NTP +server port is open only when client access is allowed by the allow directive +or command, an NTP peer is configured, or the broadcast directive is used. + +If you don't need to use chronyc remotely, you can add the following directives +to the configuration file to bind the command sockets to the loopback +interface. This is done by default since version 2.0. + +bindcmdaddress 127.0.0.1 +bindcmdaddress ::1 + +If you don't need to use chronyc at all or you need to run chronyc only under +the root or chrony user (which can access chronyd through a Unix domain socket +since version 2.2), you can disable the internet command sockets completely by +adding cmdport 0 to the configuration file. + +You can specify an unprivileged user with the -u option, or the user directive +in the chrony.conf file, to which chronyd will switch after start in order to +drop root privileges. The configure script has a --with-user option, which sets +the default user. On Linux, chronyd needs to be compiled with support for the +libcap library. On other systems, chronyd forks into two processes. The child +process retains root privileges, but can only perform a very limited range of +privileged system calls on behalf of the parent. + +Also, if chronyd is compiled with support for the Linux secure computing +(seccomp) facility, you can enable a system call filter with the -F option. It +will significantly reduce the kernel attack surface and possibly prevent kernel +exploits from the chronyd process if it's compromised. It's recommended to +enable the filter only when it's known to work on the version of the system +where chrony is installed as the filter needs to allow also system calls made +from libraries that chronyd is using (e.g. libc) and different versions or +implementations of the libraries may make different system calls. If the filter +is missing some system call, chronyd could be killed even in normal operation. + +2.6. How can I improve the accuracy of the system clock with NTP sources? + +Select NTP servers that are well synchronised, stable and close to your +network. It's better to use more than one server, three or four is usually +recommended as the minimum, so chronyd can detect servers that serve false time +and combine measurements from multiple sources. + +If you have a network card with hardware timestamping supported on Linux, it +can be enabled by the hwtimestamp directive in the chrony.conf file. It should +make local receive and transmit timestamps of NTP packets much more accurate. + +There are also useful options which can be set in the server directive, they +are minpoll, maxpoll, polltarget, maxdelay, maxdelayratio, maxdelaydevratio, +and xleave. + +The first three options set the minimum and maximum allowed polling interval, +and how should be the actual interval adjusted in the specified range. Their +default values are 6 (64 seconds) for minpoll, 10 (1024 seconds) for maxpoll +and 8 (samples) for polltarget. The default values should be used for general +servers on the Internet. With your own NTP servers, or if you have permission +to poll some servers more frequently, setting these options for shorter polling +intervals may significantly improve the accuracy of the system clock. + +The optimal polling interval depends mainly on two factors, stability of the +network latency and stability of the system clock (which mainly depends on the +temperature sensitivity of the crystal oscillator and the maximum rate of the +temperature change). + +Generally, if the sourcestats command usually reports a small number of samples +retained for a source (e.g. fewer than 16), a shorter polling interval should +be considered. If the number of samples is usually at the maximum of 64, a +longer polling interval may work better. + +An example of the directive for an NTP server on the Internet that you are +allowed to poll frequently could be + +server foo.example.net minpoll 4 maxpoll 6 polltarget 16 + +An example using shorter polling intervals with a server located in the same +LAN could be + +server ntp.local minpoll 2 maxpoll 4 polltarget 30 + +The maxdelay options are useful to ignore measurements with an unusally large +delay (e.g. due to congestion in the network) and improve the stability of the +synchronisation. The maxdelaydevratio option could be added to the example with +local NTP server + +server ntp.local minpoll 2 maxpoll 4 polltarget 30 maxdelaydevratio 2 + +If your server supports the interleaved mode (e.g. it is running chronyd), the +xleave option should be added to the server directive in order to allow the +server to send the client more accurate transmit timestamps (kernel or +preferably hardware). For example: + +server ntp.local minpoll 2 maxpoll 4 xleave + +When combined with local hardware timestamping, good network switches, and even +shorter polling intervals, a sub-microsecond accuracy and stability of a few +tens of nanoseconds may be possible. For example: + +server ntp.local minpoll 0 maxpoll 0 xleave +hwtimestamp eth0 + +If it is acceptable for NTP clients in the network to send requests at an +excessive rate, a sub-second polling interval may be specified. A median filter +can be enabled in order to update the clock at a reduced rate with more stable +measurements. For example: + +server ntp.local minpoll -6 maxpoll -6 filter 15 xleave +hwtimestamp eth0 minpoll -6 + +2.7. Does chronyd have an ntpdate mode? + +Yes. With the -q option chronyd will set the system clock once and exit. With +the -Q option it will print the measured offset without setting the clock. If +you don't want to use a configuration file, NTP servers can be specified on the +command line. For example: + +# chronyd -q 'pool pool.ntp.org iburst' + +2.8. Can chronyd be configured to control the clock like ntpd? + +It is not possible to perfectly emulate ntpd, but there are some options that +can configure chronyd to behave more like ntpd. + +In the following example the minsamples directive slows down the response to +changes in the frequency and offset of the clock. The maxslewrate and +corrtimeratio directives reduce the maximum frequency error due to an offset +correction and the maxdrift directive reduces the maximum assumed frequency +error of the clock. The makestep directive enables a step threshold and the +maxchange directive enables a panic threshold. The maxclockerror directive +increases the minimum dispersion rate. + +minsamples 32 +maxslewrate 500 +corrtimeratio 100 +maxdrift 500 +makestep 0.128 -1 +maxchange 1000 1 1 +maxclockerror 15 + +2.9. What happened to the commandkey and generatecommandkey directives? + +They were removed in version 2.2. Authentication is no longer supported in the +command protocol. Commands that required authentication are now allowed only +through a Unix domain socket, which is accessible only by the root and chrony +users. If you need to configure chronyd remotely or locally without the root +password, please consider using ssh and/or sudo to run chronyc under the root +or chrony user on the host where chronyd is running. + +3. Computer is not synchronising + +This is the most common problem. There are a number of reasons, see the +following questions. + +3.1. Behind a firewall? + +Check the Reach value printed by the chronyc's sources command. If it's zero, +it means chronyd did not get any valid responses from the NTP server you are +trying to use. If there is a firewall between you and the server, the packets +may be blocked. Try using a tool like wireshark or tcpdump to see if you're +getting any responses from the server. + +When chronyd is receiving responses from the servers, the output of the sources +command issued few minutes after chronyd start might look like this: + +210 Number of sources = 3 +MS Name/IP address Stratum Poll Reach LastRx Last sample +=============================================================================== +^* foo.example.net 2 6 377 34 +484us[ -157us] +/- 30ms +^- bar.example.net 2 6 377 34 +33ms[ +32ms] +/- 47ms +^+ baz.example.net 3 6 377 35 -1397us[-2033us] +/- 60ms + +3.2. Are NTP servers specified with the offline option? + +Check that you're using chronyc's online and offline commands appropriately. +The activity command prints the number of sources that are currently online and +offline. For example: + +200 OK +3 sources online +0 sources offline +0 sources doing burst (return to online) +0 sources doing burst (return to offline) +0 sources with unknown address + +3.3. Is chronyd allowed to step the system clock? + +By default, chronyd adjusts the clock gradually by slowing it down or speeding +it up. If the clock is too far from the true time, it will take a long time to +correct the error. The System time value printed by the chronyc's tracking +command is the remaining correction that needs to be applied to the system +clock. + +The makestep directive can be used to allow chronyd to step the clock. For +example, if chrony.conf had + +makestep 1 3 + +the clock would be stepped in the first three updates if its offset was larger +than one second. Normally, it's recommended to allow the step only in the first +few updates, but in some cases (e.g. a computer without an RTC or virtual +machine which can be suspended and resumed with an incorrect time) it may be +necessary to allow the step on any clock update. The example above would change +to + +makestep 1 -1 + +3.4. Using a Windows NTP server? + +A common issue with Windows NTP servers is that they report a very large root +dispersion (e.g. three seconds or more), which causes chronyd to ignore the +server for being too inaccurate. The sources command may show a valid +measurement, but the server is not selected for synchronisation. You can check +the root dispersion of the server with the chronyc's ntpdata command. + +The maxdistance value needs to be increased in chrony.conf to enable +synchronisation to such a server. For example: + +maxdistance 16.0 + +3.5. Using a PPS reference clock? + +A pulse-per-second (PPS) reference clock requires a non-PPS time source to +determine which second of UTC corresponds to each pulse. If it is another +reference clock specified with the lock option in the refclock directive, the +offset between the two reference clocks must be smaller than 0.2 seconds in +order for the PPS reference clock to work. With NMEA reference clocks it is +common to have a larger offset. It needs to be corrected with the offset +option. + +One approach to find out a good value of the offset option is to configure the +reference clocks with the noselect option and compare them to an NTP server. +For example, if the sourcestats command showed + +Name/IP Address NP NR Span Frequency Freq Skew Offset Std Dev +============================================================================== +PPS0 0 0 0 +0.000 2000.000 +0ns 4000ms +NMEA 58 30 231 -96.494 38.406 +504ms 6080us +foo.example.net 7 3 200 -2.991 16.141 -107us 492us + +the offset of the NMEA source would need to be increased by about 0.504 +seconds. It does not have to be very accurate. As long as the offset of the +NMEA reference clock stays below 0.2 seconds, the PPS reference clock should be +able to determine the seconds corresponding to the pulses and allow the samples +to be used for synchronisation. + +4. Issues with chronyc + +4.1. I keep getting the error 506 Cannot talk to daemon + +When accessing chronyd remotely, make sure that the chrony.conf file (on the +computer where chronyd is running) has a cmdallow entry for the computer you +are running chronyc on and an appropriate bindcmdaddress directive. This isn't +necessary for localhost. + +Perhaps chronyd is not running. Try using the ps command (e.g. on Linux, ps +-auxw) to see if it's running. Or try netstat -a and see if the ports 123/udp +and 323/udp are listening. If chronyd is not running, you may have a problem +with the way you are trying to start it (e.g. at boot time). + +Perhaps you have a firewall set up in a way that blocks packets on port 323/ +udp. You need to amend the firewall configuration in this case. + +4.2. I keep getting the error 501 Not authorised + +Since version 2.2, the password command doesn't do anything and chronyc needs +to run locally under the root or chrony user, which are allowed to access the +chronyd's Unix domain command socket. + +With older versions, you need to authenticate with the password command first +or use the -a option to authenticate automatically on start. The configuration +file needs to specify a file which contains keys (keyfile directive) and which +key in the key file should be used for chronyc authentication (commandkey +directive). + +4.3. Why does chronyc tracking always print an IPv4 address as reference ID? + +The reference ID is a 32-bit value and in versions before 3.0 it was printed in +quad-dotted notation, even if the reference source did not actually have an +IPv4 address. For IPv4 addresses, the reference ID is equal to the address, but +for IPv6 addresses it is the first 32 bits of the MD5 sum of the address. For +reference clocks, the reference ID is the value specified with the refid option +in the refclock directive. + +Since version 3.0, the reference ID is printed as a hexadecimal number to avoid +confusion with IPv4 addresses. + +If you need to get the IP address of the current reference source, use the -n +option to disable resolving of IP addresses and read the second field (printed +in parentheses) on the Reference ID line. + +4.4. Is the chronyc / chronyd protocol documented anywhere? + +Only by the source code. See cmdmon.c (chronyd side) and client.c (chronyc +side). + +5. Real-time clock issues + +5.1. What is the real-time clock (RTC)? + +This is the clock which keeps the time even when your computer is turned off. +It is used to initialise the system clock on boot. It normally doesn't drift +more than few seconds per day. + +There are two approaches how chronyd can work with it. One is to use the +rtcsync directive, which tells chronyd to enable a kernel mode which sets the +RTC from the system clock every 11 minutes. chronyd itself won't touch the RTC. +If the computer is not turned off for a long time, the RTC should still be +close to the true time when the system clock will be initialised from it on the +next boot. + +The other option is to use the rtcfile directive, which tells chronyd to +monitor the rate at which the RTC gains or loses time. When chronyd is started +with the -s option on the next boot, it will set the system time from the RTC +and also compensate for the drift it has measured previously. The rtcautotrim +directive can be used to keep the RTC close to the true time, but it's not +strictly necessary if its only purpose is to set the system clock when chronyd +is started on boot. See the documentation for details. + +5.2. I want to use chronyd's RTC support. Must I disable hwclock? + +The hwclock program is often set-up by default in the boot and shutdown scripts +with many Linux installations. With the kernel RTC synchronisation (rtcsync +directive), the RTC will be set also every 11 minutes as long as the system +clock is synchronised. If you want to use chronyd's RTC monitoring (rtcfile +directive), it's important to disable hwclock in the shutdown procedure. If you +don't, it will over-write the RTC with a new value, unknown to chronyd. At the +next reboot, chronyd started with the -s option will compensate this (wrong) +time with its estimate of how far the RTC has drifted whilst the power was off, +giving a meaningless initial system time. + +There is no need to remove hwclock from the boot process, as long as chronyd is +started after it has run. + +5.3. I just keep getting the 513 RTC driver not running message + +For the real-time clock support to work, you need the following three things + + o an RTC in your computer + + o a Linux kernel with enabled RTC support + + o an rtcfile directive in your chrony.conf file + +5.4. I get Could not open /dev/rtc, Device or resource busy in my syslog file + +Some other program running on the system may be using the device. + +5.5. What if my computer does not have an RTC or backup battery? + +In this case you can still use the -s option to set the system clock to the +last modification time of the drift file, which should correspond to the system +time when chronyd was previously stopped. The initial system time will be +increasing across reboots and applications started after chronyd will not +observe backward steps. + +6. NTP-specific issues + +6.1. Can chronyd be driven from broadcast/multicast NTP servers? + +No, the broadcast/multicast client mode is not supported and there is currently +no plan to implement it. While the mode may be useful to simplify configuration +of clients in large networks, it is inherently less accurate and less secure +(even with authentication) than the ordinary client/server mode. + +When configuring a large number of clients in a network, it is recommended to +use the pool directive with a DNS name which resolves to addresses of multiple +NTP servers. The clients will automatically replace the servers when they +become unreachable, or otherwise unsuitable for synchronisation, with new +servers from the pool. + +Even with very modest hardware, an NTP server can serve time to hundreds of +thousands of clients using the ordinary client/server mode. + +6.2. Can chronyd transmit broadcast NTP packets? + +Yes, the broadcast directive can be used to enable the broadcast server mode to +serve time to clients in the network which support the broadcast client mode +(it's not supported in chronyd, see the previous question). + +6.3. Can chronyd keep the system clock a fixed offset away from real time? + +Yes. Starting from version 3.0, an offset can be specified by the offset option +for all time sources in the chrony.conf file. + +6.4. What happens if the network connection is dropped without using chronyc's +offline command first? + +chronyd will keep trying to access the sources that it thinks are online, and +it will take longer before new measurements are actually made and the clock is +corrected when the network is connected again. If the sources were set to +offline, chronyd would make new measurements immediately after issuing the +online command. + +Unless the network connection lasts only few minutes (less than the maximum +polling interval), the delay is usually not a problem, and it may be acceptable +to keep all sources online all the time. + +7. Operating systems + +7.1. Does chrony support Windows? + +No. The chronyc program (the command-line client used for configuring chronyd +while it is running) has been successfully built and run under Cygwin in the +past. chronyd is not portable, because part of it is very system-dependent. It +needs adapting to work with Windows' equivalent of the adjtimex() call, and it +needs to be made to work as a service. + +7.2. Are there any plans to support Windows? + +We have no plans to do this. Anyone is welcome to pick this work up and +contribute it back to the project. + +Last updated 2018-09-19 16:38:15 CEST |